Long products and wire rod
|
|
- Jonas Barrett
- 6 years ago
- Views:
Transcription
1 production prograe Long products and wire rod Mittal Steel Ostrava a.s.
2 production prograe Long products and wire rod Mittal Steel Ostrava a.s.
3 Mittal Steel Ostrava a.s. TRADITIONAL PRODUCER OF THE HIGH QUALITY METALURGICAL PRODUCTS Rolling s of Mittal Steel Ostrava a.s. are a traditional producer of long products in the Czech republic. Long products mainly for constructions and structures, are produced at two s Rolling, and one Continuous Wire Rod. The produces heavy and medium section iron, from the simple sections, trough the shaped bars, special section bars and I, IPE and U bars, up to the size of 220. The continuous Wire-Rod produces hot rolled stell wire rod, and reinforcing bars of small diameters. The medium which was put in operation in the year 191 produces a variety assortment of hot rolled long products: fine and medium sections of basics shapes, ribbed reinforcing bars, I, IPE bars up to 140 size, U bars up to 0 size and some special profiles.
4 contents Round bars Reinforcing bars Wire rod Flat bars Equal Angles Unequal Angles I, IPE, IPE A, IPE AA, HEA and HEB shape bars Channels
5 certification Rolling s of Mittal Steel Ostrava a.s. are holder of certificates: - Quality System Management according to EN ISO 9001 since the year Environmental Management System according to EN ISO since the year Furthermore they obtained and renew on regular base the certificates of comformity to the product technical requirements: - TZÚS Praha for the deliveries to domestic market and EU market - - ZETOM Katowice for the deliveries to Poland - IBDIM Warszawa for the deliveries to Poland - TSÚS Bratislava for the deliveries to Slovakia - RW TÜV Essen for the deliveries to export. Hot rolled products of structural non-alloy steels will be delivered according to EN 025-2:2004 (or its identical national modifications e.g. DIN EN, ČSN EN) and with CE marking. Products manufactured according to others standarts can only be delivered without the conformity marketing with a notification included in the sales contracts that the products are not destined for the use in the construction industry.
6 Round bars According to DIN 13/1:1976, EN 060: 2003, ČSN :1994, HŽ :1993 and HŽ :1993 Nominal diameter d Maximum deviation of diameter Δd Roundness deviation (Max. ovality) Cross sectional A Weight of 1m cm 2 kg/m ± G ± 0.4 (± 0.25) 1 0. (0.5) ± 0.4 (± 0.25 ) 1 0. (0.5) ± ± 0.5 (± 0.25) (0.5) ± ± ± ± ± ± ± ± 0.6 (± 0.3) (0.6) ± ± ± 0.6 (± 0.3) ± 0.6 (± 0.3) ± ± ± ± ± 0.6 (± 0.35 ) ± 0.6 (± 0.35 ) ± ± 0.6 (± 0.35 ) ±
7 Nominal diameter d Maximum deviation of diameter Δd Roundness deviation (Max. ovality) Cross sectional A Weight of 1m cm 2 kg 36 ± ± ± 0. (± 0.35) (0.7) ± ; ± ± 0. (± 0.42) (0.4) ± 0. (± 0.44) (0.) ± 0. (± 0.45) (0.9) ± ± 0. (± 0.47) (0.94) ± ; ± ± ±1 (± 0.52) (1.04) ± ± ± ± ± ± ± ; ± ± ± ± ± ± ± ± ± ± ± ± ± G Round bars 1 The limit deviations of nominal diameter are valid for supplies of bars according to HŽ standard Round bars from steel grades of classes and 11 hot rolled for screw mills. The bars according to ČSN 4255 standard from the in the limit deviation with increased accuracy of production can be supplied upon agreement only. 2 The diameter 39 (according to DIN 13/2:1976) coon accuracy upon agreement with the producer only. 3 Round bars for production mill ball according to internial standards. Steel grade according HŽ standard. Notice: Round bars of diameter 70-1 from are delivered upon agreement with the producer and sales department. These sizes are the subject of irregular production.
8 Supplied steel grades Quality standards/numerical code EN 025-2:2004 S 235JR EN 025: A1:1993 ČSN DIN 170:190 DIN 17200:197 St G2 RSt 37-2 S 235JR S235J St 37-3 EN 03: A1: E295 E St St 52-3 E335 E St 60-2 E360 E St Steel grades supplied upon agreement only. It is possible to deliver also other steel grades according to other standards upon agreement C35 (Ck 35) C35EU C45 (Ck 45) C45EU C55 (Ck 55) C55EU EN 025-2:2004 S 235JR EN 025: A1:1993 G2 ČSN Standards / Steel Grades DIN 170:190 St 37-2 RSt 37-2 S 235J0 S235J St 37-3 S 275JR S 275J0 S275JR S275J St 44-2 S 275J2 S275J2G St 44-3 E295 E St 50-2 S 355J0 S355J2 S355J2G St 52-3 E335 E St 60-2 E360 E St 70-2 DIN 17200:197 DIN 172:196 EN 03: A1:199 EN 04:199 0 C, Ck CE, CR C35, Ck 35 Cm35 C45, Ck 45 Cm45 C55, Ck 55 Cm55 C60, Ck 60 Cm60 C15, Ck 15 Cm 15 C35, C35E C35R C45, C45E C45R C55, C55E C55R C60, C60E C60R C15E, C15R 1 These steels with the guaranteed Al content 11 37, and ( incl. equivalents according to foreign standards) of diameters from to 20 can be supplied upon agreement with the producer only. There is possibility to supply also other steel grades according to other standards upon agreement. Plain structural steel grades with higher carbon content , a , (incl. equivalents according to foreign standards) steel grade (incl. equivalents) and carbon steel grades ( 0 061) are supplied in size from the diameter of 22. Diameters to 22 are delivered upon agreement only. Steel grades of class 060 and 061 and theirs equivalents according to the foreign standards upon agreement.
9
10 Reinforcing steel bars According to ČSN :1996 Grade 505 Nominal diameter D Diameter of outer cover D 2 Cross rib height h Rib width b 1 = b Rib pitch L Nominal cross section Weight of 1 m Minimum Nominal Maximum cm 2 kg Wire Rod There is possibility to deliver in coils or bars upon agreement with production plant. Notice: The limit deviations of rib height h are: - to %, - 25 % of mentioned value of size - from 1 ± 25 % of mentioned value of size Allowed deviations of ribs pitch L are ± 15 % in all extent of mentioned diameters. The diameter of cover is measured over longitudinal ribs
11 According ŐNORM B 4200/7:197 Reinforcing bars Nominal diameter D Cross rib height h max Rib width b Rib pitch L min-max Nominal cross section Weight of 1 m Minimum Nominal Maximum cm 2 kg According to BS 4449:1997/part 5 Grade 460B Nominal diameter D Nominal cross sectional Min. mass Nominal mass Max. mass 2 kg/m kg/m kg/m Notice: imeter dimensions only, not inches. According to ASTM A 615 / A 615 M-00(01b) Grade 40 1, Grade Supplies upon agreement with the producer only. Nominal diameter D Nominal cross sectional Min. mass Nominal mass 2 kg/m kg/m
12 According to DIN 4/T2:196, Grade BSt 500S(IVS),acc. to DIN/T1 4:194 Nominal diameter D Diameter of outer cover D 2 Cross rib height h Rib width b 1 = b Rib pitch L Nominal cross section Weight of 1 m Minimum Nominal Maximum cm 2 kg
13 According to SS-ENV 00: NAD(S) Grade B500 BT Nominal diameter D Diameter of outer cover D 2 Cross rib height h Rib width b 1 = b Rib pitch L Nominal cross section Weight of 1 m Minimum Nominal Maximum cm 2 kg According to Czech standard KN :1995 Grade 33 Not torsion bar DETAIL A Cold torsion bar in average D to 14D Wire-Rod Nominal diameter D Cross rib height h Boss Height h 1 Boss Width b 1 Cross rib Width b Cross rib axial distance L Nominal cross section Weight of 1 m Minimum Nominal Maximum 2 kg
14 Wire rod According to DIN 591:1962, HŽ 42 54:199 Wire-Rod Nominal diameter 5.5 Limit deviation (HŽ) Limit deviation (DIN) Weight of 1 m kg 6 ± ± ± ± Supplied steel grades Quality standards/numerical code EN 025-2:2004 S 235JR EN A1: 1993 G2 ČSN DIN 170:190 DIN 17140:1962 DIN 17140:193 ASTM A 5M: D D D 9-1 D St 37-2 RSt Steel grades D 6-2, D -2, and 15 are delivered upon agreement with the producer only. 2 Steel grades and according to ČSN are delivered as continuously cast killed steel with Si content max. 0,15 %. For wire rod intended for zinc galvanizing, the Si content has to be agreed in the contract of purchase.
15 Wire rod
16 Flat bars According to DIN 17:1967 Sheet 1, EN 05:2003, ČSN :1994 : : width 1 0 width (according DIN only) Width b 1 Dimension Width tolerance Thickness tolerance Thickness tolerance ± 0.4 (± 0.3) 2 Weight kg/m ± 0. (± 0.5) Width b 55 Width tolerance Thickness tolerance ± 0.5 (± 0.3) 2 Weight kg/m ± 1.0 (± 0.7) ± 1.5 (± 1.2) ± 2.0 (±1.6) ± The sizes with these thicknesses are supplied according to the DIN 17:1967 standard sheet 1, only. 2 Limit deviations of width and thickness at enhanced accuracy of production. 3 Sizes from width are delivered according DIN standard only. Sizes according ČSN and other standards are delivered upon agreement with production plant.
17 Width b Dimension Width tolerance Thickness s Thickness tolerance ± 0, (± 0,7) 2 Weight kg/m ± 0. (± 0.5) Width b Width tolerance Thickness tolerance ± 1,0 (± 0,7) 2 ± 1,5 (± 1,2) 2 Weight kg/m ± 1.0 (± 0.7) ± 1.5 (± 1.2) ± 2.0 (± 1.6) ± Flat bars Notice: Other widths mentioned in DIN 17/1967 standard are supplied upon agreement. Other dimensions are supplied upon agreement.
18 Supplied steel grades Quality standards/numerical code EN 025-2:2004 EN 025 : A1:1993 ČSN DIN 170:190 DIN 17200:197 DIN 172:196 EN 03: A1:199 EN 04:199 S235J0 G2 S275JR S275J St 37-2 RSt St 44-2 S275J2 S275J2G St 44-3 E295 E St 50-2 S355J2 S355J2G St 52-3 E335 E St 60-2 E360 E St C, Ck CE, CR C35, Ck35 Cm35 C45, Ck45 Cm45 C55, Ck55 Cm55 C60, Ck60 Cm60 C15, Ck15 Cm15 C35, C35E C35R C45,C45E C45R C55,C55E C55R C60, C60R C60R Notice: There is possibillity to deliver also other steel grades not included in this production prograe according to other standards upon agreement. Steel grades 060 and 061 ( and their equivalents according to foreign standards) are delivered upon agreement with the producer only. Plain structural steels with higher content of carbon , a (incl. equivalents), steel grade (incl. equivalents), and carbon steel grades ( 0 061) are delivered in widths from 50 up. Width up to 50 upon agreement only. Steel grade with guarranted Al content and (including foreign equivalents), width up to 40 (included) are delivered upon agreement with the producer. C15E, C15R EN 025-2:2004 EN 025: A1:1993 ČSN DIN 17 0:190 EN 025:1990 G St 37-2 RSt 37-2 Fe 360 B Fe 360 BFN S275JR S275JR St 44-2 Fe 430 B St 52-3 Fe 5 C Notice: There is possibillity to deliver also other steel grades not included in this production prograe according to other standards upon agreement. Straightness parameter 0,4 % l.
19
20 Equal Angles According to EN 056-1:199, DIN 2:1994 a arm width s arm thickness r 1 inner radius fillet r 2 arm radius fillet e centroid distance from outer arm edge w extreme arm points distance from central axis v 1, v 2 distance from central axis I moment of inertia W cross section module i radius of inertia L Nominal dimensions Extreme fibre distance cm Cross section cm 2 a s r 1 r 2 e w v 1 v 2 A G L L L L L L L Weight L L L kg/m
21 L Nominal dimensions Extreme fibre distance cm Cross section cm 2 a s r 1 r 2 e w v 1 v 2 A G Weight L L L L kg/m Static values x x = y y x x h h L l x W x i x I x i x I h W h i h cm 4 cm 3 cm cm 4 cm cm 4 cm 3 cm L L L L L L L L L L L L L L Equal Angles
22 According to ČSN :1974 b arm width t arm thickness r inner radius fillet r 1 arm radius fillet e centroid distance from outer arm edge w extreme arm points distance from central axis v, v 1 distance from central axis I moment of inertia W cross section module i radius of inertia L Nominal dimensions Extreme fibre distance cm Cross section cm 2 b t r r 1 e v v 1 w A G Weight kg/m L 40 x L L L L 60 6 L L L 0 6 L
23 L L 0 6 L 1 L 0 L Nominal dimensions Extreme fibre distance cm Cross section A Weight b t r r 1 e v v 1 w cm 2 kg/m G L L Static values for bending axes X X = Y Y X 1 X 1 x x h h J W i J x1 J x i x J h W h i h cm 4 cm 3 cm cm 4 cm 4 cm cm 4 cm 3 cm L L L L 60 6 L L L 0 6 L 90 6 L L 1 L L
24 Equal Angles produced according to drawings These dimensions are not mentioned either in ČSN or in DIN standards. L Size in inches (when possible) L Arm width a Nominal dimensions Arm thickness s L 40 x L 45 x 6 7 L 50 x 9 L 55 x L 60 x 4 7 L 63 x L 65 x (2.5 x 1/4 ) (2.5 x 1/4 ) (2.5 x 1/4 ) L 70 x L 75 x 5 9 L 75 x L 0 x L 90 x L 0 x L 2 x 7 13 L 1 x L 0 x L 130 x (3 x 3/16 ) (3 x 3/16 ) (3 x 5/16 ) (3 x 3/ ) (3 x 1/2 )
25 Supplied steel grades Quality standards/numerical code EN025-2:2004 EN 025: A1:1993 ČSN DIN 170:190 S275JR S275J0 G2 S275JR S275J St 37-2 Rst St 44-2 S275J2 S275J2G St 44-3 S355J2 S275JR S275J0 S355J2 It is possible to deliver also other steel grades according to alternative standards. 1 There is possibility to deliver grade S355J2G3 for equal angles with wall thickness S355J2G3 G2 S275JR S275J0 S355J2G St St 37-2 Rst St St 52-3
26 Unequal Angles According to EN 056-1:199, (DIN 29:1994) a, b arm width s arm thickness r 1 inner radius fillet r 2 arm radius fillet e x, e y centroid distance from outer arm edge w 1, w 2, extreme arm point distance from central axis v 1,v 2, v 3 distance from central axis I moment of inertia W cross section module i radius of inertia α central axis angle of inclination of cross section inertia from Y axis L Nominal dimensions Extreme fibre distance cm Cross section A Weight a b s r 1 r 2 e x e y w 1 w 2 v 1 v 2 v 3 cm 2 kg/m G L Position of axis Static value x x y y x x h h h h I x W x i x I y W y i y I x i x I h i h tan α cm 4 cm 3 cm cm 4 cm 3 cm cm 4 cm cm 4 cm
27 According to ČSN :1977 a, b arm width s arm thickness r 1 inner radius fillet r 2 arm radius fillet e x, e y centroid distance from outer arm edge w 1, w 2, extreme arm point distance from central axis v 1,v 2, v 3 distance from central axis I moment of inertia W cross section module i radius of inertia α central axis angle of inclination of cross section inertia from Y axis L Nominal sizes Extreme fibre distance cm Cross section A Weight a b s r 1 r 2 e x e y w 1 w 2 v 1 v 2 v 3 cm 2 kg/m G L Positron of axis y Static value h h I x W x i x I y W y i y I x i x I h i h x x h h Unequal Angles tan α cm 4 cm 3 cm cm 4 cm 3 cm cm 4 cm cm 4 cm
28 Supplied steel grades Quality standards/numerical code EN025-2:2004 EN 025: A1:1993 ČSN DIN 170:190 S275JR S275J0 S355J2 G2 S275JR S275J0 S355J2G St 37-2 Rst St St 52-3 It is possible to deliver also other steel grades according to alternative standards. (There is possibility to deliver St 44-2, and S275JR from upon agreement.)
29
30 I shaped bars According to DIN 25/1:1995 (ČSN :1969) h cross section height b cross section width s web thickness t flange thickness r 1 inner radius fillet r 2 flange radius fillet J moment of inertia W cross section modulus i radius of inertia S x half cross section static moment I Nominal dimensions Cross section A Weight h b s t r 1 r 2 cm 2 kg/m G I Static values for bending axes Jx W x i x J y W y i y cm 4 cm 3 cm cm 4 cm 3 cm cm S x
31 IPE shaped bars According to DIN 25/5:1994 (ČSN :195) h cross section height b cross section width t 1 web thickness t 2 flange thickness r inner radius fillet J moment of inertia W cross section modulus i radius of inertia S y half cross section static moment IPE Nominal dimensions Cross section cm 2 h b t 1 t 2 r A G Weight kg Static values for bending axes IPE J y y y W y i y J z z z W z i z cm 4 cm 3 cm cm 4 cm 3 cm cm S y I, IPE, IPE A, IPE AA, HEA, HEB shape bars
32 Supplied steel grades (I and IPE shaped bars) Quality standards/numerical code EN025-2:2004 EN 025: A1:1993 ČSN DIN 170:190 S275JR S275J0 G2 S275JR S275J St 37-2 Rst St 44-2 S275J S275J2G St 44-3 S355J2 S275JR S275J0 S355J2 S355J2G3 G2 S275JR S275J0 S355J2G St St 37-2 Rst St St 52-3 It is possible to deliver also other steel grades according to alternative standards. (There is possibility to deliver St 44-2, and S275JR from upon agreement). I0 and IPE0 shaped bars of the steel grades and from with guaranteed Al content (and equivalents according to foreign standards) are delivered upon agreement with the producer.
33 IPE A and IPE AA shaped bars h cross section height b cross section width t 1 web thickness t 2 flange thickness r inner radius fillet J moment of inertia W cross section modulus i radius of inertia S y half cross section static moment According to KN /V: 2003 IPE AA Nominal dimensions Cross section cm 2 h b s t r A G Weight kg/m Static values for bending axes x x y y IPE AA I x W x i x I y W y i y cm 4 cm 3 cm cm 4 cm 3 cm Profiles IPE AA are produced according to internal standard and calibration drawings. The profiles are supplied upon agreement. According to KN /V: 2000 IPE A Nominal dimensions Cross section 2 h b s t r A G Weight kg/m
34 Supplied steel grades (IPE A and IPE AA shaped bars) Quality standards/numerical code EN025-2:2004 EN 025: A1:1993 ČSN DIN 170:190 S275JR S275J0 G2 S275JR S275J St 37-2 Rst St 44-2 S275J2 S275J2G St 44-3 S355J2 S355J2G St 52-3 It is possible to deliver also other steel grades according to alternative standards. 1 IPE A 0 and IPE AA 0 shaped bars of the steel grades and from with guaranteed Al content (and equivalents according to foreign standards) are delivered upon agreement with the producer.
35 HEA and HEB shaped bars HEA according to DIN 25/3:1994 (IPBl) HEB according to DIN 25/2:1995 (IPB) h cross section height b cross section width s web thickness t flange thickness R 1 inner radius fillet J moment of inertia W cross section module i radius of inertia S x half cross section static moment Nominal dimensions h b s t R 1 Cross section A cm 2 kg/m Mass G HEA HEB HEA HEB HEA HEB Notice: Above mentioned profiles HEA and HEB in the table are followed by profiles HEA and HEB in dimensions of 160, 10 and 200, produced in VÍTKOVICE join stock company. Static values for bending axes x - x y - y S x J x W x i x J y W y i y cm 4 cm 3 cm cm 4 cm 3 cm cm 3 HEA HEB HEA HEB HEA HEB Supplied steel grades (HEA and HEB shaped bars) Quality standards/numerical code EN025-2:2004 EN 025: A1:1993 ČSN DIN 170:190 S275JR S275J0 S355J2 G2 S275JR S275J0 S355J2G St 37-2 Rst St St 52-3 It is possible to deliver also other steel grade according to alternative standards. (There is possibility to deliver St 44-2, and S275JR from upon agreement.)
36 Channels According ČSN :1969 (DIN 26-1:2000) h cross section height b cross section width s web thickness t flange thickness r 1 inner radius fillet r 2 flange radius fillet J moment of inertia W cross section module i radius of inertia s x arm of internial forces S x half cross section static moment e y y y axis distance from outer web edge c=b/2 U Nominal dimensions Cross section cm 2 h b s t r 1 r 2 A G Weight kg/m Static values for bending axes x x y y e y S x U J x W x i x J y W y i y cm 4 cm 3 cm cm 4 cm 3 cm cm cm
37 UE shaped bars According to ČSN :1961, GOST UE Nominal dimensions Cross section cm 2 h b s t r 1 r 2 A G Weight kg/m The sizes according GOST standard are delivered upon agreement with production plant only. UE Static values for bending axes x x y y e S x s J x x W x i x J y W y i y cm 4 cm 3 cm cm 3 cm cm 4 cm 3 cm cm Supplied steel grades (Channels and UE shaped bars) Quality standards/numerical code EN025-2:2004 EN 025: A1:1993 ČSN DIN 170:190 S275JR S275J0 G2 S275JR S275J St 37-2 Rst St 44-2 S275J2 S275J2G St 44-3 S355J2 S275JR S275J0 S355J2 S355J2G3 G2 S275JR S275J0 S355J2G St St 37-2 Rst St St 52-3 It is possible to deliver also other steel grades according to alternative standards. (There is possibility to deliver St 44-2, and S275JR from upon agreement). Channels
38 Technical delivery possibilities s and reinforcing steel bars STRAIGHTENING OF PROFILES is performed by nine-roll straightener S.I.M.A.C. on is performed by nine-roll straightener M&N on DIVIDING OF PROFILES is performed on by cutting either in hot or cold conditions to following lengths: round bars production 3 m under 3 m exact 5, 6, 7, m ±0 (+0; -0) shaped bars production m 5 m under 5 m exact 6,, 14 and 15 m ±0 (+0; -0) is performed on by cutting on cold, shape bars are cutting by profile shears in lengths: round and flat bars production 6 m 3 6 m under 3 m exact 6 15 m +0,-0 1 reinforcing bars production 14 m 6 m under 6 m exact 6 16,1 m +0,-0 1 shaped bars production m 5 m under 5 m exact 6 15 m +0,-0 1 Notice: Profiles IPE A and IPE AA are delivered in production lengths only. It is possible to supply the ribbed reinforcing bars from the Continuous Wire-Rod upon agreement with the following lengths: 6 to m (graded in length of 1 m with length tolerances ±0, or also m as the case may be) The cold torsion reinforcing bars are supplied from TOROS lines with the following lengths: m ±250 WEIGHT AND WEIGHT DEVIATIONS according to the corresponding standards BUNDLING AND MARKING OF BUNDLES IN GENERAL: Rolled material is put in bundles of weight up to 5 t, which are tied with wire. In case of section bars deliveries from the Rolling at three points at minimum. Larger number of ties is possible by agreement with the operating division. Deliveries from the are tied at 3 points. Larger number of ties from the is possible upon agreement. Bundles are marked with descriptions directly on rods, or are marked with labels with the required sign. Weight of bundles of reinforcing bars from the Continuous Wire-Rod is 3,5 t at maximum. They are tied at 4 points with the binding wire by double tie. Way of bundling and marking of bundles upon agreement with Export Department. WAY OF PLACING AN ORDERS according to the corresponding standards, or upon agreement, as the case may be WAY OF DELIVERIES according to the corresponding standards, or upon agreement Wire rod and ribbed reinforcing steel bars Wire rod and ribbed reinforcing bars from the Continuous Wire Rod are delivered in coils. Weight of coil is about kg Coil dimensions are: outside diameter approximately inside diameter approximately 50 Single coils are tied at 2 points with the binding wire. For export, the coils are tied by two (or 3) pieces in bundles with the binding wire at 4 points Exact lengths 4 m are delivered upon agreement with the producer.
39 Mittal Steel Ostrava a.s. Vratimovská Ostrava-Kunčice Czech Republic T , , , , , , F marketing.ostrava@mittalsteel.com
40 Mittal Steel Ostrava a.s. Marketing September 2006
ÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fax: +30 210 5515015 www.elastron.gr elastron@elastron.gr 1 RECTANGULAR HOLLOW SECTIONS (EN 10219) Dimensions Cross
More informationData sheet: S3 Bar and structural products Profiles, dimensions & tolerances. Introduction
Data sheet: S3 Bar and structural products Profiles, dimensions & tolerances Introduction ArcelorMittal South Africa, Vereeniging Works produces a wide variety of long and forged products. Products are
More informationTalk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07. Head Office: Cape Town: Durban: Tel Tel.
Talk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07 Head Office: Cape Town: Durban: Piet Rautenbach Steet Tel. +27 12 541-3211 Tel. +27 21 949-0658 Tel. +27 31 701-6078 P.O. Box
More informationProduct Range Handbook
Product Range Handbook 1 Where to find us Building 144 Culham Number 1 Site Station Road CULHAM Oxon OX14 3DA Sales: +44 (0)1865 409300 Fax: +44 (0)1865 407991 2 INDEX PAGE ROUND BARS 4 SQUARE BAR 5 TEES
More informationE-03 A. DEFINITION FABRICATED PRODUCTS CATALOGUE SHEET
A. DEFINITION Fabricated products are described as below: Abrasion resistant pipework with or without flanges Various technology abrasion (wear) resistant linings Catalogue sheet applies to all disciplines
More informationSingle direction thrust ball bearings Double direction thrust ball bearings
Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...
More informationDS 0002 MOV 2014 DISTITEC Srl
DS 0002 MOV 2014 DISTITEC Srl The realization of this catalog occurred in tighter control of data contained therein. Due to the ongoing technical evolution of our products, we reserve the right to make
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR. Innovative high strength steels for economical steel structures
ArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR Innovative high strength steels for economical steel structures Shanghai World Finance Center, P.R. China Innovative high strength
More informationSteel technology Elastic properties of steel 1071 European standards for structural steels 1072
Appendix Steel technology Elastic properties of steel 1071 European standards for structural steels 1072 Design theory Bending moment, shear and deflection 1077 Bending moment and reaction 1102 Influence
More informationDear Business Partners,
PRODUCT CATALOGUE Dear Business Partners, MERETUK FOREIGN TRADE is an independent steel trading company based in Iskenderun / Hatay / TURKEY. We are involved in trading and marketing of long, tubular,
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationCelsius 355 NH technical guide Structural hollow sections
Celsius 355 NH technical guide Structural hollow sections Contents 03 Introduction 04 echnical data 08 Size range charts 12 Sectional properties Celsius 355 Circular 16 Sectional properties Celsius 355
More informationSeamless hot rolled tubes and seamless hollow bars
Seamless hot rolled tubes and seamless hollow bars Benteler Distribution Customised steel tube solutions An internationally operating stockholding company of carbon alloy and stainless steel tubes With
More informationÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ionnis str., Ag. Ionnis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fx: +30 210 5515015 www.elstron.gr elstron@elstron.gr 1 SQUARE HOLLOW SECTIONS (EN 10219) Dimensions Cross section Weight
More informationContents
Contents 1 2-3 4 5 6-7 8 9 10 11 12 13 14 15-19 20-26 27 28 29 30 31 32 33 A Word about Steel Pipe Company Profile & Premises and Plants of Melewar Steel Tube Sdn. Bhd. Main Products Quality Products Quality
More informationReinforcing steel bars
Reinforcing steel bars 6 The Company produces the reinforcing rolled steel according to the international and national standards: DSTU 3760:2006 (Ukraine) GOST 5781-82 (international standard) GOST 10884-94
More informationEXPORTERS OF ENG MATERIALS & FABRICATIONS
EXPORTERS OF ENG MATERIALS & FABRICATIONS Certificate of Registration This is to certify that the Quality Management System of UK Steel Exports Limited Blackvein Industrial Estate, Cross Keys, Newport,
More informationCERTIFIED TO ISO 9001:2008 CERT NO:AR 0994
CERTIFIED TO ISO 9001:2008 CERT NO:AR 0994 www.melewar-mig.com MELEWAR STEEL TUBE SDN. BHD. (111059-D) Lot 53 Persiaran Selangor, 40200 Shah Alam, Selangor Darul Ehsan. Malaysia Tel : 603-5519 2455 (12
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More information10 Thrust ball bearings
10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings
More informationVibration damping precision couplings
Vibration damping precision couplings In light of the advantages of elasticity, strength, resilience, and damping effects, elastomer materials are now being used in most areas of mechanical engineering.
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationJIS G4051 Carbon steel for Machine Structural Use
JIS G4051 Carbon steel for Machine Structural Use 1. Scope This Japanese Industrial Standard specifies the carbon steels for machine structural use manufactured by hot forming, such as hot rolling or hot
More informationStructural Sections. Page 15
Page 15 MILD STEEL CHANNELS Product Shortname: CH AS 3679-300 AS 3679-350 (on indent only) BS4360-43A Mass per Metre = area of section x 0.00785 = kg/m Metres per Tonne = 1000 = metres kg/m Size (A x B)
More informationPRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH INDEX 01. HOT ROLLED REINFORCING BARS PAGE 4 02. WIRE ROD PAGE 6 03. BILLET FROM CONTINUOUS CASTING PAGE 8
More informationSupreme. Supreme Framing System. Product Catalog IAPMO UNIFORM ER #0313
Supreme Supreme Framing System Product Catalog IAPMO UNIFORM ER #0313 2507 Table of Contents Certification of Materials 5 LEED Credits 5 Independent Product Certification 5 Code Approvals, Performance
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationGerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
More informationwww.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
More informationSteel Sheet Piles. PU-R Sections PU 8R PU 9R - 10R - 11R PU 13R - 14R - 15R t t t
Steel Sheet Piles PU-R s 49.5 t s 280 PU 8R 54.5 t s PU 9R - 10R - 11R 49.5 t s PU 13R - 14R - 15R Hot Rolled Steel Sheet Piles - Rodange, Luxembourg ArcelorMittal, the worldwide leader in steel sheet
More informationTechnical Data MM Channel
Technical Data MM Channel The enclosed pages are taken from the Installation Systems Catalogue 2015 for additional information please visit the technical library at www.hilti.co.uk or call our Technical
More information2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) Supreme Framing System Product Catalog
12 0 2 / 2009IANT C B I PL COM 2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) R Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What
More informationServomechkaramoottorit
Solutions for power transmission Servomechkaramoottorit www.konaflex.fi INDEX 1 Servomech 1. THE PRODUCT 1.1 SERVOMECH Linear Actuators......................... Page 2 1.2 SERVOMECH Linear Actuators range............................
More information4 Self aligning ball bearings
Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed
More informationEXTRACTION CHECK VALVES
EXTRACTION CHECK VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production
More informationHeavy-Duty Rod Ends - Male with integral spherical plain bearing
Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationINDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10
PRODUCT CATALOGUE 1 2 3 INDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10 MS CHEQUERED SHEETS... 13 CHANNELS... 14 HOT ROLLED
More informationGATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
More informationCorus Tubes. Celsius. 355 Technical Guide. Structural Hollow Sections
Corus Tubes Celsius 355 Technical Guide Structural Hollow Sections Contents 01 Introduction 02 Technical data 06 Production range charts 08 Sectional Properties Celsius 355 Circular 10 Sectional Properties
More informationSKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1.
SKE Sizes 18.. 55 Weight 0.13 kg.. 1.95 kg Axial force 140 N.. 2560 N Torque 0.4 Nm.. 9.0 Nm Bending moment 7.0 Nm.. 128 Nm Application example Robot gripper module for the removal and loading of a variety
More informationMetric Service. ISO 9001 Certified. Parker Steel Company Distribution Center in Toledo, Ohio
Click Here to Visit MetricMetal.com 2018 Parker Steel Metric Metals Reference Guide Parker Steel s New Offices at 1625 Indian Wood Circle, Maumee, Ohio 43537 The Largest Stock of Metric Size Metals in
More informationHybox 355 technical guide Structural hollow sections
Hybox 355 technical guide Structural hollow sections Contents 03 Introduction 04 Technical data 06 Size range charts 08 Sectional properties Hybox 355 Circular 11 Sectional properties Hybox 355 Square
More informationHot Rolled Structural Sections
Hot Rolled Structural Sections The structural sections are widely used in construction of Pre-Engineered Buildings (PEB), Stadiums, Architectural Buildings, Bridges, Jetties, Airport Concourse, Gantries,
More information...our linkages, your solution. Rod Ends
...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain
More informationPresby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
More informationFlat products Catalogue. Coils
Flat products Catalogue Coils Sheets Content Ilyich Iron and Steel Works of Mariupol Hot rolled coils according to Ukrainian and the CIS standards...06 according to European standards...08 according to
More informationDEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More information2MHP 3MHP 5MHP 8MHP 14MHP D8MHP
Profiles: t h t h s 2MHP, 3MHP, 5MHP, 8MHP, 14MHP optibelt OMEGA HP W T Profile: D8MHP HIGH PERFORMANCE TIMING BELT MADE OF CHLOROPRENE maintenance-free, with glass-fibre tension cord 2MHP 3MHP 5MHP 8MHP
More informationCOMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
More informationBS EN Cold formed welded structural hollow sections of non alloyb and fine grain steels Tolerances, dimensions and sectional properties
BS EN 10219 2 Cold formed welded structural hollow s of non alloyb and fine grain steels Tolerances, dimensions and al properties 1 Scope This part of EN 10219 specifies tolerances for cold formed welded
More informationIBC 2009/2012 COMPLIANT. Supreme Framing System. Product Catalog
IBC 2009/2012 COMPLIANT 2507 Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What is the Supreme Framing System? Supreme Framing
More informationPiling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
More informationLARGEST STOCK OF METRIC SIZE METALS IN AMERICA
WWW.METRICMETAL.COM METRIC SIZE METALS REFERENCE GUIDE 2009 ISO 9001:2000 Certifi ed LARGEST STOCK OF METRIC SIZE METALS IN AMERICA Our highly trained sales staff is waiting for your calls. With more than
More informationHPL Tubes. Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Mannesmann Precision Tubes As a leading European manufacturer of cold-drawn
More informationINSOCOAT bearing designs INSOCOAT bearings with coated outer ring INSOCOAT bearings with coated inner ring
INSOCOAT bearings INSOCOAT bearing designs... 913 INSOCOAT bearings with coated outer ring... 913 INSOCOAT bearings with coated inner ring... 913 Other INSOCOAT bearings... 913 Bearing data general...
More informationBS EN :2006. Hot finished structural hollow sections of non alloy and fine grain steels
. BS EN 1010 :006 Hot finished structural hollow sections of non alloy and fine grain steels 1 Scope This part of EN 1010 specifies tolerances for hot finished circular, square, rectangular and elliptical
More informationExpanding Your Solutions. Steel Framing and Accessories. ICC ESR and 2015 IBC, IRC
Expanding Your Solutions Steel Framing and Accessories ICC ESR-30 20 and 2015 IBC, IRC Effective 1/4/2017 Table of Contents Introduction to CEMCO... 1 Product Identification... 2 3 LEED Certification...
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationBall Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
More information3.1 Available sections, terms of delivery
3.1 Interlocks LARSSEN section Interlock design conforming to DIN EN 10248-2 and E 67 of EAU 2004 LARSSEN 43, 430 HOESCH section (LARSSEN interlock) Interlock design conforming to DIN EN 10248-2 and E
More informationHPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Salzgitter Mannesmann Precision SMP-Group As a leading European manufacturer
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationhore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
More information12.3 Full Roller Type, MSR Series
12.3 Full Roller Type, MSR Series A. Construction Carriage End Seal Grease Nipple End Cap Inner Seal Roller Bottom Seal 45 Rail 45 B. Characteristics The full roller type linear guideway, MSR series, equip
More informationLong Carbon Europe Sections and Merchant Bars ArcelorMittal
Long Carbon Europe Sections and Merchant Bars ArcelorMittal Price-list Beams, Channels and Merchant bars Austria / Belgium / Czech Republic / Denmark / Estonia / Finland / France / Germany / Hungary Italy
More informationLinear Guideways HG Series
18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove
More informationSEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS
SEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS HOT ROLLED AND STRUCTURAL STEEL PRODUCTS CONTENTS INTRODUCTION 1 TEST CERTIFICATES AND 2 CERTIFICATES OF COMPLIANCE BUILD WITH STANDARDS AND ACRS
More informationSLEWING RING CHARACTERISTICS, APPLICATIONS
SLEWING RING CHARACTERISTICS, APPLICATIONS Slewing rings are large-sized bearings which are able to accommodate combined load, i.e. axial, radial loads and tilting moment. They are usually provided with
More information1-3/8" inside-to-inside dimension. length of the leg. S162
Member Designation MEMBER DEPTH: FLANGE WIDTH: STIFFENER LIP: Member Depths are taken in 1/100 inches. Flange Widths are taken in 1/100 inches. Member Flange Width Stiffener Lip (in) For Track Sections,
More informationDYWIDAG Marine Tie Rods Smooth Bars & Walings
DYWIDAG Marine Tie Rods Smooth Bars & Walings 2 Contents General Information... 4 Fields of Applications... 4 Overview of Steel Grades... 5 Steel Properties... 5 Thread Creation... 6 Key Advantages of
More informationERW construction tubes and pipes
ERW construction tubes and pipes Welded Hollow Rounds Quality according to EN10219. Pieces / Cross - section mm Bundle 0.9 mm 1.2 mm 1.4 mm Φ16 200 0,345 0,451 - Φ21 150 0,465 0,605 0,680 Φ25 150 0,547
More information8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.
2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the
More informationSECTIONS FOR MINE ROADWAY SUPPORTS AND TUNNELS
SECTIONS FOR MINE ROADWAY SUPPORTS AND TUNNELS 1 Success is a journe, not a destination. Ben Sweetland 2 COMPANY PROFILE KOCAER GROUP commenced its operations in te iron and steel sector in te earl 1960s
More informationTRIPLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.8
α TRIPLE-ECCENTRIC UTTERFLY VALVES TYPE L32.8 Application Triple-eccentric butterfly valves are industrial valves, which designed to fully open or close the passage of the working medium flowing through
More informationTYPE CERTIFICATE DATA SHEET
TYPE CERTIFICATE DATA SHEET No. P. 019 for AV 803 PROPELLER Type Certificate Holder Avia Propeller Limited Beranovych 65/666 199 00 Praha 9 Letnany Czech Republic For Models: AV 803 1 TE.CERT.00050 001
More informationREPORT HOLDER: CLARKDIETRICH BUILDING SYSTEMS 9050 CENTRE POINTE DRIVE, SUITE 400 WEST CHESTER, OHIO EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1464 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
More informationDesign And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions
Design And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions Tejas Mulay 1, Harish Sonawane 1, Prof. P. Baskar 2 1 M. Tech. (Automotive Engineering) students, SMBS, VIT University, Vellore,
More informationRolling Bearings KLF-ZVL Bearings, s. r. o.
Rolling Bearings KLF-ZVL Bearings, s. r. o. Lidická 667, 258 01 Vlašim tel.: 00420 317 844 485, fax: 00420 317 844167 www. klf-zvl.cz, klf-zvl@klf-zvl.cz Page 3 Double-Row Cylindrical Roller Bearings with
More informationF LEXIBLE DUCT VERSIONS
Ref. no.: 2-16 F LEXIBLE DUCT VERSIONS fo r a ll n e e d s o f t h e v en ti t la i n o y g lo o n h c te Aero - ALUFLEX duct Aero - ALUSTRETCH duct Aero - ALUFLEX isolated duct Aero - ALUFLEX attenuator
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More information6000_EN_05_TRB.indd
6000_EN_05_TRB.indd 600 06-10-02 14.41.31 Taper roller bearings Single row taper roller bearings... 605 Paired single row taper roller bearings... 671 601 6000_EN_05_TRB.indd 601 06-10-02 14.41.32 Taper
More informationSewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
More informationAxial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
More informationRevision and Errata List AISC Steel Construction Manual, 13 th Edition, Third Printing (Revision 2 June 2010)
Revision and Errata List AISC Steel Construction Manual, 13 th Edition, Third Printing (Revision 2 June 2010) The following list represents corrections that have been made in the Fourth Printing of the
More informationh Technical Product Data CC Pressure Pipe Systems
h Technical Product Data CC Pressure Pipe Systems Amiblu Holding GmbH All rights reserved. Publication: 09/2018 This version replaces all previous versions. For all current data please visit our website
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationElectric Chain Hoists. CLF & CLW Series. The New CLF Series: Reliable, safe, convenient, efficient and compact size
Industrial Cranes Customized Cranes Light Crane Systems Crane Components Electric Wire Rope Hoists Electric Chain Hoists Spare Parts Electric Chain Hoists CLF & CLW Series The New CLF Series: Reliable,
More information15E INSOCOAT bearings
15E INSOCOAT bearings Designs and variants............... 1206 INSOCOAT bearings with a coated outer ring......................... 1207 INSOCOAT bearings with a coated inner ring.........................
More informationSPECIAL PRICE PROMOTION. WORKSHOP EQUIPMENT. BODYWORK TOOL ASSORTMENT; BELT SANDER, IMPACT DRIVER, TORQUE WRENCH; HOTMELT ADHESIVE GUN.
Bodywork tool assortment. - This tool assortment (25-pieces) can be used for working in the bodywork repair area. - Universal grips for small round parts, flat parallel clamping jaws, clamping range sb
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationHigh Pressure Gear Pumps KP 5
High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket
More informationStandard Duty A.T.S.A. - Temp Desuperheater Model 24 / 34
Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry
More informationK3D300 ±200kN. Description
K3D300 ±200kN The 3-axis sensor K3D300 is suitable for measuring force in three mutually perpendicular axes. Force is applied from the 150 mm x 150 mm recess. A component can be installed on this surface
More information4.5 COMPOSITE STEEL AND CONCRETE
4.5 COMPOSITE STEEL AND CONCRETE 4.5.1 RULES OF THUMB 4.5 Composite Steel and Concrete (1/11) Typical starting point Overall concrete depth 130mm (Grade 30) Depth of profiled decking 60mm Size beam with
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationOverhead transmission lines Spacers
= SVENSKA KRAFTNÄT SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AEL, Asset Management Lines OUR REFERENCE TR05-08E DATE 2016-06-09 CONSU12TATIONS TECHNICAL GUIDELINE REVISION 3 APPROVED Overhead transmission
More information