LIFTING SYSTEMS CONCRETE ACCESSORIES. Coils. Lifting System.
|
|
|
- Willis Scott
- 6 years ago
- Views:
Transcription
1 ONRETE AEORIE oils ifting ystem IFTING YTEM 33
2 IFTING YTEM OI TRAIGHT OI OOP oil is welded to a single wire closed loop. THREA () () OY () IA. () W /2" coil 4" 1-3/16" 0.306" " /2" coil 6" 1-3/16" 0.306" " /2" coil 24" 1-3/16" 0.306" " /4" coil 4" 1-5/8" 0.375" " EGE IT /4" coil 6" 1-5/8" 0.375" " " coil 4" 2-1/16" 0.375" " " coil 5" 2-1/16" 0.375" " " coil 6" 2-1/16" 0.375" " " coil 8" 2-1/16" 0.375" " Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal ONA does not recommend using 1/2" inserts for lifting. OUE FARE OI OOP econd coil loop adds significant capacity in both shear and tension. THREA () () OY () IA. () W H 1" 12" 2-1/16" 0.440" /4" /4" X 12 H 1-1/4" 12" 2-3/8" 0.440" /4" /2" x 12 H 1-1/2" 12" 2-9/16" 0.440" /4" Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal weight concrete INGE FARE OI OOP oil is welded to a singled flared wire loop strut. THREA () () OY () IA. () OOP PREA () W /2" 4" 1-3/16" 0.306" 3-1/8" " /2" 12" 1-3/16" 0.306" 3-1/8" " /4" 4" 1-5/8" 0.306" 3-1/2" " /4" 6" 1-5/8" 0.375" 3-1/2" " H 3/4" 9" 1-5/8" 0.440" 5-5/8" " H 3/4" 12" 1-5/8" 0.440" 5-5/8" " H 1" 9" 2-1/16" 0.440" 5-5/8" " H 1" 12" 2-1/16" 0.440" 5-3/4" " UGGETE EGE ITANE Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal ONA does not recommend using 1/2" inserts for lifting
3 OI OUE FARE RI-RO OI OOP econd coil loop adds significant capacity in both shear and tension. THREA () () OY () IA. () OOP PREA () W 33 10x12-1/2" 1" 12-1/2" 2-1/16" 0.375" 5-9/16" x 12-1/2" H 1" 12-1/2" 2-1/6" 0.440" 5-3/4" IFTING YTEM Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal THIN A 4 EG OI Very versatile insert intended for use for lifting and handling thin slab concrete. The coil is welded to four " shaped legs. THREA () () OY () IA. () PREA () W /4" 3" 1-5/8" 0.306" 7-1/16" /4" 4" 1-5/8" 0.306" 7-1/16" TRUT /4" 5" 1-5/8" 0.375" 7-1/16" " 3-1/2" 2-1/16" 0.375" 9-3/8" " 4" 2-1/16" 0.375" 9-3/8" " 5-1/2" 2-1/16" 0.375" 9-3/8" W/6 1" 6-1/2" 2-1/16" 0.375" 9-3/8" /4" 4" 2-1/16" 0.375" 9-3/4" Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal EXPANE OI W/2 OR 4 TRUT oil is welded to dual flared wire loop struts. Intended for use for heavy anchorage conditions. Inserts located at the end of either two or four wire connecting struts. TRUT THREA () () OY () IA. () OVERA WITH (G) W 56-3/4 2 3/4" 4-1/2" 1-5/8" 0.440" 2-1/8" " 5-1/2" 2-1/16" 0.440" 2-3/8" / /4" 7-1/2" 2-3/8" 0.440" 3" / /2" 9-1/2" 2-9/16" 0.440" 3" Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal G 35
4 IFTING YTEM OI FARE THIN A OI - WING NUT TYE oil is welded to two " profile closed loop wire struts. Intended for handling thin slab concrete sections. THREA () () OY () IA. () PREA () W /2" 1-3/4" 1-3/16" 0.223" 4-1/2" 950 4" /4" 2-5/16" 1-5/8" 0.375" 4-7/8" " /4" 3-1/2" 1-5/8" 0.375" 4-7/8" " /4" 4" 1-5/8" 0.375" 4-7/8" " " 2-5/16" 2-1/16" 0.375" 5-1/4" " " 3" 2-1/16" 0.375" 5-1/4" " " 3-1/2" 2-1/16" 0.375" 5-1/4" " " 4" 2-1/16" 0.375" 5-1/4" " " 4-1/2" 2-1/16" 0.375" 4-1/4" " UGGETE EGE ITANE Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal ONA does not recommend using 1/2" inserts for lifting. INGE PIK UP OI Used for face lifting of flat wall panels. THREA () () W 1T " 5-1/2" T " 6-1/2" T " 7-1/2" T " 9-1/2" 8100 Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal eformed Wire
5 OI OI TIE Very versatile insert intended for use for lifting. The coil is welded to two or four strut also available with hear ar. Intended as a strong and versatile form tie insert. G G IFTING YTEM TRAIGHT RI-RO OI Ideal for edge lifing applications due to high strength provided by the 4 struts design. TRUT THREA () () OY () IAMETER () OVERA WITH (G) W T2-3/4X5 2 3/4" 5" 1-5/8" 0.375" 1-5/8" 4250 T2-3/4X6 2 3/4" 6" 1-5/8" 0.375" 1-5/8" 4500 T2-3/4X8 2 3/4" 8" 1-5/8" 0.375" 1-5/8" 6000 T2-3/4X21 2 3/4" 21" 1-5/8" 0.375" 1-5/8" 6000 T2-1X6 2 1" 6" 2-1/16" 0.440" 2-3/8" 6000 T2-1-1/4X /4" 8" 2-1/16" 0.440" 2-1/2" 7500 T4-3/4X6 4 3/4" 6" 1-5/8" 0.440" 1-3/4" 6000 T4-1X6 4 1" 6" 2-1/16" 0.440" 2-3/8" 6000 T4-1X8 4 1" 8" 2-1/16" 0.440" 2-3/8" 9000 T4-1X12 4 1" 12" 2-1/16" 0.440" 2-3/8" 9000 T4-1X15 4 1" 15" 2-1/16" 0.440" 2-3/8" 9000 T4-1-1/4"X /4" 8" 2-3/8" 0.440" 2-1/2" 9000 T4-1-1/4"X /4" 12" 2-3/8" 0.440" 2-1/2" T4-1-1/4"X /4" 18" 2-3/8" 0.440" 2-1/2" T4-1X12 4 1" 12" 2-1/16" 0.440" 2-3/4" 9000 T4-1X15 4 1" 15" 2-1/16" 0.440" 2-3/4" 9000 T4-1X18 4 1" 18" 2-1/16" 0.440" 2-3/4" 9000 T6-1-1/4X /4" 10" 2-3/8" 0.440" 2-3/4" Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal THREA () () IA. () OY () W F 3/4X9 3/4" 9" 0.375" 1-5/8" 3,700 F1X12H 1" 12" 0.440" 2-1/16" 6,500 F1-1/4X12H 1-1/4" 12" 0.440" 2-3/8" 7,500 Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal 37
6 IFTING YTEM OI OI NUT F T THREA () THIK. (T) ARO FAT (F) N05 1/2" 1/2" 3/4" 1800 N075 3/4 3/4" 1-1/8" 3600 N10 1" 1" 1-1/2" 7200 TENION TRENGTH tandard finish plain (self color) OI OT T F THREA () () HEA THIK. (T) ARO FAT (F) TENIE TRENGTH /2" 1-1/2" 3/8" 3/4" /2" 2" 3/8" 3/4" /2" 2-1/2" 3/8" 3/4" /2" 3" 3/8" 3/4" /2" 4" 3/8" 3/4" /2" 5" 3/8" 3/4" /2" 6" 3/8" 3/4" /4" 2" 1/2" 1-1/8" 3600 AUTION: oil bolts should always be long enough to penetrate at least 1" beyond the coil insert threads /4" 2-1/2" 1/2" 1-1/8" /4" 3" 1/2" 1-1/8" /4" 4" 1/2" 1-1/8" /4" 5" 1/2" 1-1/8" " 4" 11-16" 1-1/2" 7200 tandard finish plain (self color) OI RO IZE (X) TENIE W HEAR W R 1/2 X 6 1/2" X AUTION: o not cut with torch. All ONA coil rods are made from high tensile steel. R 3/4 X 6 3/4" X R 1 X 6 1" X R 1-1/4" X 6 1-1/4" X R 1-1/2" x 6 1-1/2" X tandard finish plain (self color) PATI OI PROTETOR ooks like coil bolt. Use for keeping the coil clean during casting. an be nailed to wood forms. THREA IZE T OOR PP-05 1/2" OI 1/2" 2-1/4" white 200 PP-075 3/4" OI 3/4" 3" white 200 PP-01 1" OI 3/4" 4-1/2" white 200 QUANTITY PER OX T OI THREAE PATI PUG an be nailed to wood forms THREA IZE OOR TP4016 1/2" OI lt. blue 100 QUANTITY PER OX TP4018 3/4" OI dk. green
7 OI WIVE IFTING PATE For safe lifting, ifting Plates must have full bearing and be tightened securely. 5:1 safety factor. IFTING YTEM 1-1/2" 2-3/4" 2-3/4" 5" 2-5/8" 5-1/8" 7-1/16" IZE MIN. OT APA. WP75 3/4" 4" 9,000 WP10 1" 5" 9,000 IZE MIN. OT APA. WP10-1" 5" 9,000 IZE MIN. OT APA. WP /4" 6" 13,500 WP /2" 6" 13,500 OI IFTING OOP Most economical lifting units for this system. Manufactured from flexible wire rope. For tension only - limited to 30 degrees from vertical. Galvanized cable loop with mill finished threaded stud. IAMETER () APAITY OA A 50 1/2" 2, /2" 2-1/4" 75 3/4" 5, /2" 2-3/4" 100 1" 8, /4" 2-3/4" A Note: W provides a factor of safety of approximately 5:1 in 3,000 psi normal EYE OT Forged steel: one piece coil threaded eye bolt for tension lifting only. A THREA () THREA () OUTIE IA. (A) INIE IA. () W EYE OT 3/4X2 EYE OT 3/4" 2" 2-7/8" 1-1/2" 3,600 EYE OT 1X2-1/2 EYE OT 1" 2-1/2" 3-1/2" 1-3/4" 6,400 Note: W provides a factor of safety of approximately 5:1 in 3,000 psi normal 39
ALP2018 ALP COIL INSERTS AND ACCESSORIES
LP2018 LP N CCESSORIES LP Supply P: 800-332-7090 P: 215-736-2030 www.alpsupply.com 81 LP2018 COIL INSERT SFE WORKING LO REUCTION FCTORS FOR TENSION LOING ONLY For Free Conditions- When inserts have a truncated
Fleet-Lift System Components
The ayton Superior Fleet-Lift System comprises two main parts, the Fleet-Lift nchor and the Fleet-Lift Ring lutch. The design of the system allows loads to be applied from any direction. Fleet-Lift System
HIGH PRESSURE - hydraulic cylinders
SSU - hyraulic cyliners A, type aterial: rotective coating: eium: ax. piston spee : ax. working press.: Carb. steel an cast iron (hea) U,, O, T rimer (option), chromiumplate yraulic oil 0.5 m/s 200 From
16 - Swivels & Joining Links
16 - Swivels & Joining inks Quicklinks - Stainless Stainless "C" inks 316 grade stainless steel. n alternative to shackles or snaps allowing quick entry via a threaded hexagon locking nut. S 1 R S S..
Bridge Overhang Brackets
Bridge C49, C49D, C49S and C49JR Bridge Dayton Superior offers the bridge contractor four different Horizontal Length versions of the C49 Bridge Bracket, which allows for maximum adjustability to meet
NAILCLMP-Nail Clamps RW List Prices - Page J-1
NAILCLMP-Nail Clamps RW List Prices - Page J-1 Pipe Clamps With Nail Suspension Clamps 13405618 1/2 556-2 Half Clamp W/Nail 0.36 13405634 3/4 556-3 Half Clamp W/Nail 0.40 13499998 1 556-4 Half Clamp W/Nail
STRAIGHTWAY TAPER PLUG VALVES
CAST STEEL CLASS SHORT PATTER RECTAGULAR PORT 2 Psi 0 Psi Straight way Short Flanges R.F. or R.J. ASME B 16.5 Face to Face ASME B 16.10 B TYPED D 1" 6" 9AS 124 D 1" 9AS 124 C D6" 9AS 124 D 9AS 127 9AS
CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
A GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
COMPONENTS FOR LIFTING AND DIE STORING
COMPONENTS FO IFTING N IE STOING IFTING S HF 1 COMPONENTS FO IFTING N IE STOING 1 Caulking at two points φ1 1 3 IFTING S HF IFTING EYE OTS CHI CST-IN IFTING OTS CSN HOOKS OT TYPE CHN Page 148 149 149 1
Section 5. SYGEF Standard PVDF Piping System. Effective Jan. 16, See for updated info. P
Section 5 SYGEF Stanar PVF Piping System P0801084 Effective Jan. 16, 2012. See www.gfpiping.com for upate info. SYGEF Stanar Prouct Specification Material Color ensity Surface tension inear expansion coefficient
FIXTURE HOOKS. For Hanging Industrial Light Fixtures WT. PER PKG. Vertical Mount used for hanging threaded rod WT. PER PKG.
Top/End 4¼" 2½" FIXTURE HOOKS For Hanging Industrial Light Fixtures 5½" 5¼" Side MOUNT PER STD. FHK1 21400 Top/End Mount 4.50 100 50.54/c FHK2 21405 Side Mount 4.80 100 50.54/c TIE WIRE ACOUSTICAL TOLE
Heating Cable. Ordering Information SRL-C SRL-CR, CT SRP-C, SRP-CT CWM-C CWM-CT SRL-MC SRL-MCR, MCT SRM/E-C SRM/E-CT SRL-C SRL-CR, CT SRP-C, SRP-CT
L & L eries onnection ccessories L eries Re-usable omponents Through-the-nsulation Mounting Provides High Visibility asy ccess for Maintenance RTP RTT RT L eries Low Profile Provides asy nstallation of
Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables)
TF 209-R-08 Metric Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables) INTRODUCTION This Tech Fact* provides basic information on coldworked wire and welded
HORIZONTAL SYSTEMS SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY.
SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY. 90 You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That s why safety
KLT and KLS Series Tank Top Return Line Filters
KLT and KLS Series Tank Top Return Line Filters 23 KLT/KLS Series Tank Top Return Line Filters Applications for KLT and KLS Filters Mobile Equipment Construction, Refuse Industrial Power Units Machine
Rapid Lifting Anchor System. Connector Ring Clutch (t)
Rapid Lifting Anchor System The Rapid Lifting System primary purpose is to lift precast concrete with the help of its Rapid anchoring system, comprises of required dynamic load bearing anchor and required
MANTSINEN 120 ES, 160 ES, 200 ES HybriLift
MANTSINEN 1 ES, ES, ES HybriLift More load, less energy MANTSINEN 1 ES, ES and ES HybriLift More load, less energy lift your efficiency to the next level with hydraulic precision MANTSINEN 1 ES, ES and
Made in the USA INDUSTRIAL BUCKET ELEVATORS
ade in the U UL U LV U : o provide innovative quality solutions that create an extraordinary customer experience. UGL HG L L P G LV HG LG H P High tandard imensions Gauge tandard High apacity odel odel
13: Cargo Control. 13: Cargo Control
13.1: Logistic Track... 2 13.2: Shoring Beams & Accessories... 3 13.3: Load Bars & Accessories... 4 13.4: Logistic Straps... 5 13.5: Ratchets & Ratchet Straps... 6 13.6: Winches, Winch Track, & Winch Bars...
Panduit.com
Cones Barriers & Barricades 1 Cone Top Warning Signs Cones Temporarily and quickly direct facility traffic. Slips into top of any standard, flexible traffic cone Rugged, 0.060" plastic Same message both
HOIST-RING SAFETY PRECAUTIONS
age 34 (Rev. 4-07) & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-9 & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-978-3377 OIST-RI STY RUTIOS The following safety precautions apply to all lifting devices on
DYWIDAG Marine Tie Rods Smooth Bars & Walings
DYWIDAG Marine Tie Rods Smooth Bars & Walings 2 Contents General Information... 4 Fields of Applications... 4 Overview of Steel Grades... 5 Steel Properties... 5 Thread Creation... 6 Key Advantages of
We Make Good Neighbors!
2 We Make Good Neighbors! 3 1 6 11 2 7 12 3 8 13 4 9 14 5 10 15 4 11 1/2 GAUGE x 2 3/8 MESH 3 High 50035 4 High 50045 5 High 50050 6 High 50055 9 GAUGE X 2 MESH Knuckle Twist 0.148 GAW - ASTM A 392, Class
Table of Contents WARN INDUSTRIES PAGE A1
INSTALLATION INSTRUCTIONS AND OPERATORS GUIDE ProVantage Bucket Conversion Kit Part Number: 84133 (50 ), 83133 (54 ) and 85133 (60 ) Application: Front Mount Plow* * Not recommended for use with Center
Quality and Service Worldwide. Clamps
Quality and ervice Worldwide Clamps TANDARD-ERIE ORDER CODE-COMPONENT acc. to DIN 3015, Part 1 DEIGN OPTION Metric Threaded Components tainless teel Components Available 304/316 pecial Materials Available
Ford Frame and Suspension
20 1941-48 FORD Hot Rod Suspension Parts Please see page 12 For information on our 1941-48 Frame exchange program FRONT SHOCK KIT Super strong - 3 point mounting on upper bracket insures against breakage.
ARCHITECTURAL ROOF SUPPORTS
SECTION E ARCHITECTURAL A-0 ARCHITECTURAL TABLE OF CONTENTS Thaler Or Equal ARS-100A Floating Walkway Roof Support ARS-102A Fire Route Walkway Roof Supports ARS-115 Rail Post Roof Supports ARS-122 Satellite
DEE Shackle IS: ( Part- II ) DEE SHACKLE. Pin Diameter. Eye Outside Diameter. e min
EE Shackle IS: 6132-1971 ( Part- II ) φ φ S φ e EE SHACKLE Jaw Insie ith Insie Length Boy Material Pin Eye Outsie Safe orking Loa, Tonnes s=2.2 min e min Grae-30 Grae-40 Grae-63 Grae-80 18 40 10 12 24
Midwest Roadside Safety Facility
Downstream End Upstream End 28 Spaces @ 75" [05] = 175'-0" [53340] 29 28 27 26 25 24 23 22 21 20 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 25 75" 05 (Typ.) Impact 2270P PLAN VIEW a6 a5 a4 a3 a4 a4 a4
ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
Midwest Roadside Safety Facility
43" Bridge Pit 44 1/2" 1130 175'-0" 53340 8 Spaces @ 75" = 50'-0" 15240 6'-3" 40" 105 1016 (typ.) 22 Spaces @ 37 1/2" = 68'-" 2055 12" 4877 Spaces @ 75" = 56'-3" 17145 35" 88 1 2 3 4 5 6 7 8 11 13 15 17
Driving Systems, Tools & Products
Laminated Wood Systems, Inc. PATENT NO. 5,383,749 Driving Systems, Tools & Products Proudly Made in AMERICA Phone: 1-800-949-3526 Fax: 402-643-4374 Laminated Wood Systems, Inc. 800-949-3526 www.lwsinc.com
VERSIONS. zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS
Efficient fixing for cracked concrete VERSIONS APPROVALS zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60, cracked Concrete
CHAINS.
CHAINS www.vanguardsteel.com CHAIN TABLE OF CONTENTS Page Chain Grade 30 Dimensions 1 Grade 30 Bright 2 Grade 30 Galvanized 3 Grade 30 Zinc Plated 4 Grade 70 5 Grade 80 6 Grade 100 7 Jack 8 Long Link 9
KROFTMAN CONTAINER SHELTER TC812
KROFTMAN CONTAINER SHELTER CONTENT FRAME P82-FR 82-0 82-02 82-03 82-0 82-05 82-06 82-07 parts list frame part numbers main frame base plan, frame plan available hight inside detail 0 detail 02, 03 Roof
BATTERY STRAPPING TOOL FOR PLASTIC STRAP P.P. P.E.T. DIGITAL CONTROL FLAT AND ROUND SURFACE
ST-DIGIT LT BATTERY STRAPPING TOOL FOR PLASTIC STRAP P.P. P.E.T. DIGITAL CONTROL FLAT AND ROUND SURFACE TECHNICAL DATA / APPLICATIONS : Compact, easy to use and versatile battery strapping tool equipped
AMY SAYS: Drop Forged Pear Link. Eyes are tapered and an eye buffer is sewn in the eye for better fit and wear. Anatomy of an
AMY SAYS: Drop Forged Pear Link Eyes are tapered and an eye buffer is sewn in the eye for better fit and wear. AMY Anatomy of an V Sling Full two-ply web bodies which allow for only one splice. (no edge
TYPICAL SPECIFICATIONS: Specific: Mechanical connections shall be Taper-Lock taper threaded couplers as manufactured by Dayton Superior Corp.
Why Taper-Lock is etter u ICC Evaluation Report ESR-2481 u Portable design allows you to take the system wherever you need it. u Sharpen cutters up to three times for previously unheard of efficiency!
SHAFFER HYDRAULIC BLOWOUT PREVENTERS TYPE LWS PREVENTERS 6, 3000 & 5000 PSI W.P PSI W.P. Parts and Dimensional Illustrations
TYPE LWS PREVENTERS 6, 3000 & 5000 PSI W.P. 10 3000 PSI W.P. Parts and Dimensional Illustrations DIMENSIONAL AND ENGINEERING DATA ON ABOVE SIZES OF TYPE LWS PREVENTERS A B C D E G G A PPR OX. W EIGHT LB
Looking for a gas spring replacement...
Welcome to... ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always
Floating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
Accessories 95. Dust caps, Dust plugs Air blowers 94. Air guns 95. Threaded hose connectors, Revolving connectors 96. page.
Accessories 95 page Dust caps, Dust pugs 92-93 Air bowers 94 Air guns 95 Threae hose connectors, Revoving connectors 96 Accessoires 96 Pastic version Soft-PVC Poyurethane Dust caps Dust pugs Materias ow
Midwest Roadside Safety Facility
4" 1092 175'-0" 540 Bridge Pit 44 1 2 " 110 8 Spaces @ 75" = 50'-0" 15240 22 Spaces @ 7 1/ = 68'-9" 20955 9 Spaces @ 75" = 56'-" 17145 6'-" 1905 (typ.) 40" 1016 5" 99" 889 2515 1 2 4 5 6 7 8 9 11 1 10
SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół. Sokółka 20...
SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete lower frame 3 2. Wrapping film feeder 9 3. Movable frame 13 4.
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
Treated steel insert. PF: Black Duroplast FS 31 DIN 7708.
1 1 3 1 S F O U R S P O K E S N W E E L W I T S O O T O L E U B oe e 2 h4 h olor 113110601 100 31 5,25 20 18 26 30 16 13,5 Black 113112601 125 37 8 25 28 32 40 22 14 Black 113115601 150 50 10 30 30 55
Lifting Points. Lifting Points Information 3:2. Rotating Eye Lifting Point - RELP 3:4. Rotating Lifting Point - RLP 3:5
ifting Points ifting Points Information 3:2 Rotating Eye ifting Point - REP 3:4 Rotating ifting Point - RP 3:5 ecentered ifting Point - P 3:6 all-bearing ifting Point - P 3:7 aster ink - 3:8 Weldable ifting
Pictograms of the table head. Pictograms of the technical data
of the table hea l ength Colour Bouning iameter Wire rope size Plug Plug+screw Bore iameter oa, tensile strength Expansion range of the technical ata Material: Polyamie Material: Polyethylene Material:
Spring Steel Fasteners
BB15 BB10-3 BB423-208 BB10L BCH32 BCH32X BCH32-F3 KIT BCH32-U-5-8 BCH32-A28 BW2-CT2 BCH32-3S BCH32-F4 BCH32-C2 BCH32-W2 BRS-32A BCH32-SC4 BCH-32-4T-C1 BCH-32-4T-A6 BR-32-4T-U-5-8 BR-32-4T-W2 233 Cooper
Table of Contents. Kit Maximum Examples Index by Kit Number Terms and Conditions...Inside Back Cover
Table of Contents Antenna Mounts Light Standoff Mounts...2 Medium Standoff Mounts...4 Heavy Standoff Mounts...6 Fixed Crossover Assemblies...8 Universal Crossover Assemblies...8 Hybrid Crossover Assemblies...9
Concrete Capacity Method
HST tud anhor Feature: - high loading apaity - ore- ontrolled expanion - uitable or tenion zone - uitable or hok loading - ire prevention aement - pre-aembled with nut and waher time aving - old ormed
TRANSPORT threaded LIFTING and FIXING inserts. 1D - system. precast concrete solutions. fixing lifting connecting
TRANSPORT threaded LIFTING and FIXING inserts 1D - system precast concrete solutions fixing lifting connecting CLPT: combining deep experience with professionalisation CLPT was founded in 1995 and has
SECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
CABLE PULLING WINCHES CONTENT
CABLE PULLING WINCHES CONTENT Capstan winch KSW-E Support winch HSW-B 750 Cable Pulling Winches Capstan winches flexible application compact, powerful and versatile When cable laying either in ducts or
Wind Sail Integrated Marketing Solutions
Wind ail Integrated arketing olutions R3.070109 The Wind ail product line is an extremely versatile marketing tool. All shapes accept the same hardware so there is never any additional hardware to purchase
Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
Lifting capacity rated from 7,000 to 10,000 pounds. Safety Factor 5:1. Loads are distributed in rectangular base.
Pivot Lifting Plates Pivot Lifting Plates 4140 Certified Aircraft High Quality Heat Treated Steel Material Lifting capacity rated from 7,000 to 10,000 pounds. Safety Factor 5:1 Loads are distributed in
BODY COMPONENTS SECTION H. Fender Backs. Metal Slat. Fender Brackets. Roof Vent. Ramps & Rails. Replacement Dome. Ramp Assist Spring
OY OMPONNTS Metal Slat Roof Vent Fender acks Fender rackets ubs & xles Replacement ome Single xle Fenders Tandem xle, Straight Style Fenders Tandem Fender, Tear rop Style Square end Fenders Triple xle
Protection Systems. 3-Way Directional Ball Valve P/Ns: X and X. A UTC Fire & Security Company FEATURES
Effective: April 2007 Fenwal Phoenix 3-Way Directional Ball Valve P/Ns: 93-118325-00X and 93-118327-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-120 FEATURE For use with Fenwal Phoenix
Lifting Points Rotating Ball-bearing De-centered Weldable Screw-on
ifting Points Rotating Ball-bearing De-centered Weldable Screw-on ifting Points ifting Points Information 3:2 Rotating Eye ifting Point - REP 3:4 Rotating ifting Point - RP 3:5 Decentered ifting Point
On-off Valves MS-EM, Inch Series Overview
On-off Valves M-EM, Inch eries Overview Manually operated on-off valve for pressurising and exhausting pneumatic systems 2 sizes: M4 grid dimension.6 in, M6 grid dimension 2.4 in Detailed product information
clamps STANDARD, HEAVY AND TWIN TUBE, PIPE AND HOSE CLAMPS
clamps TANDARD, HEAVY AND TWIN TUBE, PIPE AND HOE CLAMP Table of contents INTRODUCTION Evolution of clamps 04 Piping vs tubing 06 Features and Benefits 08 Plates, Bolts and Rails 20 Mounting Rail 20 Hexagonal
CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
Maximum Support for Your Projects
Maximum Support for Your Projects Broadest Range of Concrete Solutions Concrete inserts are an ideal solution for drop rod support of trapeze. With the widest range of styles and accessories in the industry,
FORD Car and Pickup Suspension Parts
13 CHEVROLET DRIVETRAIN 1. Rear Spring Hanger 2. Rear Spring - Dodge or C.E. Slider 3. Rear End, Nova - others 4. Rear Shock Kit 5. Rear Sway Bar 6. Transmission Mount Kit 7. Split Radius Rods 8. Brake
Protection Systems. 3-Way Directional Valve P/N: XX-00X. A UTC Fire & Security Company FEATURES
Effective: Nov. 2010 Fenwal Phoenix Directional Valve P/N: 93-2200XX-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-121 FEATURE For use with Fenwal Phoenix ystems Cost-Effective Option for
PRODUCT CATALOG. 100% American-Owned and Operated marinoware.com
PRODUCT CATALOG 100% American-Owned and Operated marinoware.com THE BEST PRODUCTS, QUALITY, AND CUSTOMER SERVICE. Our FrameRite Connectors Catalog details our line of high quality steel framing connectors.
TP-702 always exceeds your expectations
Mercury Main Features Innovative World-class Model TP-702 always exceeds your expectations Mercury TP-702 is an innovative world-class high-speed automatic strapping machine. It is suitable for 5, 6, 9,
ITT. CentriPro Fiberglass Basins, Covers, Hatches, Access Doors and Accessories. CentriPro. Engineered for life BCBASIN R4. Wastewater.
CASIN R4 ITT CentriPro Fiberglass asins, Covers, Hatches, Access oors and Accessories CentriPro is a brand of ITT Corporation. www.centripro.com CentriPro Features Fiberglass asins - heavy duty construction,
1000 PRODUCT OVERVIEW
RI IN & TT E ENT NTS olumbus cinnon has a long history of developing innovative products that have changed the material handling industry including the development of the first alloy chain in 1933. This
TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
Demolition of refineries Cutting of Metal and steel structures Cutting steel girders/beams Cutting reinforcements
Shears ISS Series Application areas F II III Demolition & renovation Recycling Light Demolition Demolition of non-reinforced concrete structures Composite steel & concrete structure demolition Demolition
Yellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
1 HYDRAULIC PLANETARY GEAR WINCHES
1 6 2 EN 14492-1 PLANETARY 3 7 4 5 1 EPH FN PLANETARY WINCHES Model EPH FN are hydraulic planetary winches. Designed for extend life and give best safe duty. These winches are built according with higher
POWER TRANSMISSION RIGID COUPLINGS
POWER TRANIION RIID COUPLIN C C-ECO C 2 EAR COUPLIN C / C-ECO RIID COUPLIN C ear couplings C are flexible shaft connections suitable for a positive torque transmission. They ensure to compensate radial,
8.0. General Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0
PRODUCT CATALOGUE 8.0 Product Catalogue Section A Version 8.0 General Components Section A General Components Index Adjustable Mudguard Mounting A:12 Anti-Luce Fastener - screw end A:13 Anti-Luce Fastener
STEP STOOLS, STANDS & LADDERS
STEP STOOLS, STANDS & LADDERS STEP STOOLS KIK-STEP Extra heavy-duty steel Comes with a double platform with non-slip rubber tread Spring-loaded casters retract under slight pressure, forcing base to the
. The economical solution to protecting underground services.
I/f 52.9 ept 2015 Xh. The economical solution to protecting underground services. n alternative access system from Gatic. Product Features and enefits Gatic OEX is a comprehensive system of single, duct
TRU-WELD Stud Welding
HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head (H) 1/2 for all 1/4 Headed Concrete Anchors. Head Height (HT) 3/16 for all 1/4 Headed Concrete Anchors. WE STU SPECIFICATIONS WE STU
HEAVY DUTY ROAD PLATE HOIST RING
HEAVY DUTY ROAD PLATE HOIST RING Association of Crane & Rigging Professionals is ready and able to serve you with other quality products. FAST-LOK TM PLATE LIFTING SYSTEM HEAVY DUTY SAFETY LIFT EYE LUG-LOK
M/s Eiffel Building Material Trading L.L.C. Al Quos Dubai. M/s Golden Tools Trading Riyadh- Saudi Arabia. M/s New Chrome Fasteners Oman
We are please to introduce ourselves as the manufacturers of Threaded Rods Zinc Plated, Plain, Hot Dip Galvanized and Stainless Steel grade 04/6, Anchor bolts/foundation Bolts, Expansion bolts, U bolts,
Commercial Body Fittings 8th Edition
RIVTS & FSTRS Commercial ody Fittings 8th dition vex vex is a versatile breakstem fastener for use with a wide variety of material including metal, plastic and wood l Wide grip range l Fast installation
Model R. q Fig. 81-H: Standard Type: q A, q B, q C, q D, q E, q F. q Fig. C-81-H: Corrosion Resistant CONSTANT SUPPORTS.
OSA SUPPORS odel R q Fig. 81-: Standard : q A, q, q, q, q, q F q Fig. -81-: orrosion Resistant : q A, q, q, q, q, q F onstant Support Finish: Standard finish; painted with semi gloss primer. orrosion resistant;
For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
![For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]](/thumbs/89/97509625.jpg "For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]")
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
P ro T ec Series of HMIS & AWD SYSTEMS PAYLOAD. PERFORMANCE. PROTECTION.
P ro T ec Serie of HMIS & AWD SYSTEMS High-Mobility Independent Supenion for Severe Off-Road Application The Iron Triangle of Payload, Performance and Protection, repreenting the three abolute mut-have
Attachment Point type APAS
Eisenwarenfabrik und Hubert Gesenkschmiede GmbH & Co. Waltermann Original Instructions Attachment Point type APAS Grade 100 Read thoroughly before assembling and using This instruction should be made available
TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page 2 EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page
SECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
Stainless Steel Ties. Bundle, Tie or Fasten with a wide variety of locking styles to meet your application needs.
Stainless Steel Ties Bundle, Tie or Fasten with a wide variety of locking styles to meet your application needs. Cable Tie Selection Guide Material Tie-Lok Ultra-Lok Ball-Lok Multi-Lok BAND-IT Self-Lok
DISTRIBUTOR PRODUCT RECALL NOTICE 3M Model SWSW Series Mobile SkyWalk Horizontal Lifeline Systems and Components
3M Personal Safety Division 3M Center, Building 235-02-W-70 St. Paul, MN 55144-1000 651 733 1110 DISTRIBUTOR PRODUCT RECALL NOTICE 3M Model SWSW Series Mobile SkyWalk Horizontal Lifeline Systems and Components
Alloy Chain Slings WIRE ROPE LP. HOW TO ORDER THE PROPER CHAIN SLING When ordering, please be sure to include the following:
Chain WIRE ROPE LP Alloy Chain Slings HOW TO ORDER THE PROPER CHAIN SLING When ordering, please be sure to include the following: SIZE means diameter of the material from which the link of the body chain
ERW construction tubes and pipes
ERW construction tubes and pipes Welded Hollow Rounds Quality according to EN10219. Pieces / Cross - section mm Bundle 0.9 mm 1.2 mm 1.4 mm Φ16 200 0,345 0,451 - Φ21 150 0,465 0,605 0,680 Φ25 150 0,547
Piling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
Parts Manual 125 Series MA
Parts Manual 125 Series MA - 1 - HEADSTOCK ASSEMBLY - 2 - HEADSTOCK ASSEMBLY ITEM PART N DESCRIPTION QTY 1 1156300 Handle 2 2 900115 Self Locking Nut 3/8 UNF 2 3 1320500 Verticality Screw 2 4 900027 Bolt
Vibra-Lok Fittings. Example: 68 VL V 4 2
Vibra-ok Fittings Advantages Vibra-ok provides a positive reliable seal under vibration conditions, mechanical shock or tube movement. The sleeve cushions the tubing permitting the tube to flex back and
DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING
DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING CONSULTANCY, DESIGN, PRODUCTION, AFTER-SALES SERVICE CONTENT 03 Consultancy, design, production, after-sales service 04 Strip decoiling,
Transport anchor system. Lifting Socket. Flat Lifting Socket. Short Anchor
Transport anchor systm W provi a complt Transport anchor systm, from various Transport Anchors, lifting vics to plastic accssoris as wll as Tchnical support. Casting in th anchors into th concrt with avanc
Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains
RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established
UNITED STRUCTURAL PRODUCTS
UNITED TRUTURL PRODUT LUMINUM BLE TRY YTEM PRODUT TLOG 7/6" DI. OLE FIXED OLLR LOOE OLLR (DJUTBLE) -/4" 5-7/8" 6-/4" W* R* 90 o o 90 ORIZONTL ELBOW W* W*+5.5" 6" +5.5" WLL PENETRTION LEEVE 0" T " GROUND