Photo by James Occhipinti

Transcription

1 H P B 2 O 0 1 AUTO MOT I V E Photo by James Occhipinti O K S 4 CATALO G

2 GENERAL MOTORS how to REbuilD YouR chevy chevy EnginE buildups David Vizard Details how to remove, disassemble, recondition, rebuild, and assemble a small-block engine to stock factory specifications. Covers models: 262, 265, 283, 302, 305, 307, 327, 350, and 400 cid engines. Covers The Editors of Chevy High Performance magazine Shows how to build small-block Chevy engines for maximum performance. Includes sections on heads, cams, exhaust systems, induction modifications, dyno-tested engine combinations, and complete engine buildups. Part # HP1029 ISBN: EAN: UPC: Part # HP1400 ISBN: EAN: UPC: /2" x 11" 176 pp. $25.00/$26.50 Can. chevy lt-1/lt-4 EnginEs big-block chevy EnginE buildups The Editors of Chevy High Performance magazine This step-by-step guide to big-block Chevy engine buildups covers everything from lowbudget engine projects for mild street performance, to all-out race motors for drag strip action. Bolt-on modifications, engine block prep, cylinder heads, intake and exhaust systems, dyno-tested combinations, and more are covered in detail. Mike Mavrigian This step-by-step guide to rebuilding LT-1 small-block Chevy engines includes sections on disassembly and inspection, reconditioning the block and bottom end, reconditioning and rebuilding the cylinder heads, fuel injection systems, and exhaust. Covers Part # HP1393 ISBN: EAN: UPC: /2" x 10 7/8" 192 pp. $25.00/$26.50 Can. Part # HP1484 ISBN: EAN: UPC: /2" x 10 7/8" 192 pp. $25.00/$26.50 Can. how to hotrod big-block chevys the classic chevy truck Bill Fisher and Bob Waar Covers all big-block engines from 1965 through the mid 80s. How to modify Chevy 396/402/427/454 engines for superb acceleration and top speed. Covers clearances, torque specs, tuning, headers, manifolds, heads, valves, pistons, cams, and much more! Jim Richardson This essential guide for owners of Chevy trucks built from 1955 through 1960 provides step-by-step instruction on frame and chassis cleaning, suspension rebuilding and upgrades, rebuilding steering, upgrading brakes to front discs, rebuilding the engine, cooling system upgrades, transmission choices, electrical rewiring, and much more. Part # HP42 ISBN: EAN: UPC: Part # HP1534 ISBN: EAN: UPC: big-block chevy EnginEs Tom Wilson A lot of good solid information for the money. Classic Sixties Covers all big-block Chevy engines from 1965 to Tells how to do a complete overhaul or a simple parts swap with sections on parts I.D., interchange, troubleshooting, parts reconditioning, and engine assembly. Part # HP755 ISBN: EAN: UPC:

3 GENERAL MOTORS chevy ls EnginE buildups building the chevy ls EnginE The Editors of Super Chevy, Chevy High Performance, and GM High-Tech Performance magazines A compilation of performance tech articles from the editors of Super Chevy, Chevy High Performance, and GM High-Tech Performance magazines on how to build maximum power and performance on the Chevy LS family of small-block engines. Mike Mavrigian This is an engine rebuilding and modification guide that includes sections on history, engine specs, disassembly, cylinder block and bottom end reconditioning, cylinder heads and valvetrain reconditioning, balancing, step-by-step engine assembly, torque values, and OEM part numbers for the popular Chevy LS series of engines. Part #: HP1567 ISBN: EAN: UPC: /2" x 10 7/8" 224 pp. $25.00/$26.50 Can. Part #: HP1559 ISBN: EAN: UPC: /2" x 10 7/8" 208 pp. $25.00/$26.50 Can. turbo hydra-matic 350 chevy ls EnginE conversion Ron Sessions MOTO Award Winner Shawn Henderson This is a detailed guide on how to install GM s popular LS small-block engines into just about any other vehicle, the most popular conversion in the aftermarket today. Includes an overview of the Chevy LS series engine, technical details on swapping transmissions, drivetrain, fuel system, wiring and ECU, exhaust, and installation. Bridges the information gap between the factory manual and a successful do-it-yourself job. Tells how to maintain, troubleshoot, teardown, recondition, assemble, and install one of the world s most popular automatic transmissions. Money-saving tips on parts interchange plus high-performance and heavy-duty modifications. Part # HP511 ISBN: EAN: UPC: " x 10" 256 pp. $25.00/$26.50 Can. Part #: HP1566 ISBN: EAN: UPC: /2" x 10 7/8" 144 pp. $25.00/$26.50 Can. PoWERgliDE transmission chevy ls1/ls6 Christopher P. Endres A complete performance guide for the first model of LS small-block Chevy engines. Includes sections on bolt-ons, cylinder heads, intake manifolds, camshafts and valvetrains, fuel injection, block prep, final assembly, exhaust, and forced induction. Carl H. Munroe This complete reference guide to the Powerglide covers it all, from a stock rebuild to an all out race unit. Subjects covered include general transmission service, basic operation, in-car service and repairs; torque converter design and operation; identification; removal, disassembly, and inspection; overhauling unit assemblies; final assembly transmission; the drag and circle track racing Powerglide; and much more. Includes over 500 photos and illustrations. Part # HP1407 ISBN: EAN: UPC: Part # HP1355 ISBN: EAN: UPC: /2" x 10 7/8" 240 pp. $25.00/$26.50 Can. camaro REstoRAtion classic camaro Tom Currao and Ron Sessions Restoration processes for First ( ) and Second ( ) Generation Chevrolet Camaros. Information on disassembling all exterior sheet metal, and reconditioning and repairing rust, sun damage, glass, wiring, and convertible tops with over 500 photos and illustrations. Ron Sessions A step-by-step, user friendly guide on how to keep a classic Camaro in pristine condition. It includes more than 25 fully illustrated how-to projects on repairs, maintenance, upgrades, and minor restoration. Part #: HP1564 ISBN: EAN: UPC: Part # HP758 ISBN: EAN: UPC: /2" x 10 7/8" 208 pp. $25.00/$26.50 Can. 2

4 FORD FoRD WinDsoR FoRD EnginE buildups Isaac Martin This completely revised and updated edition of HP s bestselling book on how to build high performance 5.0/5.8L Ford small-block engines the second most popular engine modified in the aftermarket contains five new chapters on the latest technology for modifying the cylinder block, heads, camshafts, valvetrain, exhaust system, and more. From the Editors of Muscle Mustangs & Fast Fords magazine A guide of more than 35 complete engine buildups offering different performance levels for several generations of Ford V8 engine families. Each buildup features a target goal of performance and horsepower levels, a list of components and combinations on how to achieve them, installation tips, and dyno test results. Part #: HP1558 ISBN: EAN: UPC: /2" x 10 7/8" 192 pp. $25.00/$26.50 Can. Part # HP1531 ISBN: EAN: UPC: FoRD v8 EnginEs FoRD EnginEs Tom Monroe A step-by-step guide to rebuilding the 335 and 385 series Ford engines to factory specs. Includes disassembly, inspection, reconditioning, and assembly. Covers all years and models: 351C, 351M, 400, 429, 460. Tom Monroe A no-nonsense, nuts-and-bolts, step-bystep guide on rebuilding all the versions of Ford s staple engine. Road and Track Covers all years and models: 221, 255, 260, 289, HP289, 302, Boss 302, 351W. Details engine removal, disassembly, inspection, reconditioning, and assembly to factory specs. Part # HP89 Part # HP36 ISBN: EAN: UPC: ISBN: EAN: UPC: big-block FoRD EnginEs how to build FoRD RAcing EnginEs Steve Christ Anyone anticipating a big-block rebuild should have a copy on his workbench. Mustang Monthly Tom Monroe This guide for building a race-winning Ford engine complements all of our Ford engine books. It includes chapters on: parts and engines, cylinder blocks, bottom end modifications, exhaust systems, cooling systems, lubrication systems, final engine assembly, and dyno-tested performance combinations. Covers the following models of Ford and Mercury car and truck engines: 330 HD, 330 MD, 332, 352/352 HP, 359, 360, 361, 389, 390/390 HP, 391, 410, 427, 428, 428 CJ, 428 SCJ. Details complete rebuilding procedures to factory specs. Part # HP708 ISBN: EAN: UPC: Part # HP1536 ISBN: EAN: UPC: /2 x 10 7/8 192 pp. $25.00/$26.50 Can. mustang REstoRAtion classic mustang Editors of Mustang Monthly magazine This is a compilation of more than 50 restoration and maintenance projects for Mustangs built from 1964 through 1973, the most popular collectible Mustangs. Includes how-to projects on engine and drivetrain, electrical, bodywork, interior, chassis, and suspension. Don Taylor & Tom Wilson How to buy and restore /2 to 1970 Mustangs. Covers everything from teardown to reassembly. Tips on rebuilding brakes, suspension, steering, and rewiring. Plus weather-stripping, upholstery, paint, and bodywork. Includes parts ID and year-by-year trim changes. Part #: HP1556 ISBN: EAN: UPC: /2" x 10 7/8" 224 pp. $25.00/$26.50 Can. Part # HP029 ISBN: EAN: UPC: " x 10" 176 pp. $25.00/$26.50 Can. 3

5 MOPAR/IMPORTS & modify chrysler 426 hemi EnginEs the mopar six-pack EnginE Larry Shepard Step-by-step photos to rebuild the legendary Hemi. Includes short block and cylinder head reconditioning, valvetrain, carburetion, induction, ignition, oiling, and assembly. Sections on the Hemi s history, parts identification and interchanging, current crate motors available, and a list of performance options and parts make this a musthave book for every Chrysler enthusiast. Larry Shepard Comprehensive reference on rebuilding and modifying Chrysler s famed 340 and 440 SixPack engines, from the originals to today s modern crate motors. Includes sections on history/id, short blocks, heads, camshafts, valvetrain, induction, and conversion tips for LA small blocks, Mopar big blocks, and late-model Magnum engines. Part # HP1525 ISBN: EAN: UPC: /2" x 10 7/8" 240 pp. $25.00/$26.50 Can. Part # HP1528 ISBN: EAN: UPC: /2" x 10 7/8" 256 pp. $25.00/$26.50 Can. big-block mopar EnginEs how to hot RoD mopar EnginEs (REvisED) Don Taylor A complete guide to rebuilding Chrysler, Dodge, and Plymouth big-block engines. Fully illustrated, step-by-step instructions for inspection, removal, disassembly, reconditioning, reassembly, installation, and tune-up. Also includes a complete parts identification and interchange section. Covers 383, 400, 413, 426 Hemi and 440 cid B/RB series engines. Larry Shepard A completely revised and updated edition of the bestselling Mopar A engine performance book. Includes new parts and technology for all Mopar series engines built from 1964 to Sections include blocks, heads, camshafts, valvetrains, blueprinting, and much more. Part # HP1190 ISBN: EAN: UPC: Part # HP1405 ISBN: EAN: UPC: /2" x 10 7/8" 240 pp. $25.00/$26.50 Can. torqueflite A-727 transmission big-block mopar Carl H. Munroe This book provides step-by-step instructions for how to modify Chrysler s A-727 Torqueflite automatic transmission for drag racing, road racing, and circle racing. Topics include theory of operation, transbrakes/ valve bodies, adapters, disassembly, modifications, assembly, adjustments, installation, high horsepower application, and torque converters. Chuck Senatore An excellent guide for building a race-winning, high performance big-block Mopar. Includes detailed sections on block preparation, cylinder head modifications, performance parts, blueprinting, and assembly. Covers B and RB series engines. Part # HP1302 ISBN: EAN: UPC: Part # HP1399 ISBN: EAN: UPC: /2" x 10 7/8" 240 pp. $25.00/$26.50 Can. the PoRschE 911 toyota mr2 A complete guide for owners and enthusiasts of Toyota s MR2, one of the most successful mid-engined sports cars ever built. Includes: history, sales, and model year details; OEM maintenance and repairs; chassis, brake, and suspension upgrades; engine bolt-on modifications; racing your MR2; safety; and staged combinations to build MR2s for any high-performance use, from mild street to autocrossing and road racing. Mitchell Sam Rossi Details a complete reconstruction of a Porsche 911S, transforming the car into a top competitive street-legal race car. Part # HP1489 ISBN: EAN: UPC: /2" x 10 7/8" 144 pp. $24.95/$31.00 Can. 4 Part # HP1553 ISBN: EAN: UPC: /2" x 10 7/8" 208 pp. $25.00/$26.50 Can.

6 IMPORTS the volkswagen super beetle The Editors of VWTrends magazine Covering all Super Beetle models manufactured in Volkswagen s glory years of , this indispensable resource for Beetle enthusiasts details the ground-up restoration from the chassis and engine to the drivetrain and interior of the most popular vehicle Volkswagen ever produced. how to hot RoD volkswagen EnginEs Bill Fisher All the air-cooled engine-building basics to unleash hidden horsepower in classic Volkswagens. Includes tips on carburetion, ignition and exhaust tuning, case beefing, cylinder-head flow work, camshaft selection, lubrication and cooling upgrades, 6- to 12-volt conversions, and much more. Plus a 6-page history of the first air-cooled VW engines. Part # HP1483 ISBN: EAN: UPC: Part # HP034 ISBN: EAN: UPC: YouR volkswagen AiR-coolED EnginE baja bugs & buggies Tom Wilson Step-by-step directions for rebuilding any air-cooled VW engine, from the Type-1 Beetle to the Type-4 used in the 1983 VW Bus. Describes engine teardown, inspection, reconditioning, assembly, installation, and tuneup. Complete parts identification interchange. Jeff Hibbard Everything VW racing and off-road enthusiasts need to know. Includes tested methods for improving off-road engine durability and performance, and the latest and most extensive hardware for winning race cars. Part # HP255 ISBN: EAN: UPC: " x 10" 176 pp. $25.00/$26.50 Can. Part # HP60 ISBN: EAN: UPC: xtreme honda b-series EnginEs A guide to what has been the #1 modified import for the street during the last decade the Honda engine. This book covers some performance theory basics, then launches into dyno-tested performance parts combinations for each B-series engine. Topics include: performance vs. economy; air intakes, manifolds, and throttle bodies; tuning; turbocharging; supercharging; and nitrous oxide. street RotARY Mark Warner, PE The ultimate Mazda rotary engine performance guide for street and racing. Covers 12a, 13b, and Renesis Engines, Includes sections on model/engine history, identification; theory of operation and components, rotor, housing and porting options; intake systems; exhaust systems; ignition systems; fuel, cooling, ignition systems; forced induction; and project vehicles. Part # HP1552 ISBN: EAN: UPC: /2 X 10 7/8 160 pp. $25.00/$26.50 Can. Part # HP1549 ISBN: EAN: UPC:

7 RACING & CHASSIS ADvAncED RAcE car chassis technology the RAcE car chassis Updated with new material on the latest racing technology, this book details how to design, build, and set up the chassis and suspension for road race and stock cars. Includes chassis dynamics, spring and shock theory, front and rear suspension geometry, real world racing aerodynamics, steering systems, racing chassis software, and all you need to know to set your chassis up to win races. Forbes Aird A technical handbook on the history, theory, structural design, and material used in modern race car chassis building. Includes sections on materials and structures, structural loads, a brief overview of suspension and chassis design, multi-tube and space frame chassis, joining ferrous metals, stressed skin construction, joining light alloys, carbon fiber, Kevlar and sandwich construction. Covers drag, road race, oval track open- and closed-wheel chassis for professional and amateur class racing. Part #: HP1562 ISBN: EAN: UPC: Part # HP1540 ISBN: EAN: UPC: /2" x 10 7/8" 128 pp. $19.95$22.00 Can. how to DEsign AnD build A Winning DRAg RAcE chassis AnD suspension DiRt track chassis & suspension Wayne Scraba Mega-horsepower motors need a superior chassis to transmit that power to the ground. This guide tells you how, from designing and building your own rolling chassis and rollcage to upgrading shocks, springs, and brakes. Also covers track testing and tuning for maximum performance. The Editors of Circle Track magazine Comprehensive and fully illustrated, this technical guide covers all aspects of chassis setup and design for dirt track racing. Part # HP1511 ISBN: EAN: UPC: /2" x 10 7/8" 128 pp. $25.00/$26.50 Can. Part # HP1462 ISBN: EAN: UPC: chassis EnginEERing how to make YouR car handle Herb Adams A bestselling guide on basic chassis dynamics and handling theory. Includes timeless information on center of gravity, roll center, tire dynamics, front and rear suspensions, brakes, shocks and springs, and chassis design. Fred Puhn A classic guide on how to set up any vehicle for high performance handling. Covers basic chassis and suspension terms and theory, then offers traditional setups for street, strip, road racing, and off-road handling. Part # HP1055 ISBN: EAN: UPC: /2" x 10 7/8" 144 pp. $25.00/$26.50 Can. Part # HP46 ISBN: EAN: UPC: /2" x 10 7/8" 208 pp. $25.00/$26.50 Can. STREET RODDER'S chassis & suspension the RAcing EnginE builder s Tom Monroe This guide offers the race-winning techniques used by today s top professional racing engine builders, from NASCAR to NHRA. Covers cylinder block, bottom end prep, cylinder heads, camshafts and valvetrain, dyno testing, intake manifolds, headers and a complete blueprinting assembly guide in general terms that can be applied to any make of engine. The Editors of Street Rodder magazine A compilation of chassis tech articles from the leading street rodding magazine. Features designing and how-to procedures on building the chassis and suspension for all types of street rods. Part # HP1346 ISBN: EAN: UPC: Part # HP1492 ISBN: EAN: UPC: /2" x 10 7/8" 208 pp. $25.00/$26.50 Can.

8 HANDBOOKS the WElDER s PlAsmA cutting Richard Finch Written by a noted authority in the field, this revised edition of HP s bestselling automotive book for over 20 years is a detailed, instructional manual on the theory, technique, equipment, and proper procedures of welding, brazing, equipment safety, fitting and jigging, gas welding, cutting, soldering, arc, MIG and TIG welding, plasma cutting, and special welding and cutting procedures. Eddie Paul The famed movie-car builder explains how to use a plasma cutter for custom metal fabrication. Includes basic, advanced, and CNC cutting procedures as well as how to draft and design components for racing and customcar building. It discusses safety procedures, troubleshooting, and professional tips, and includes examples from Eddie Paul s worldfamous custom shop. Part # HP1513 ISBN: EAN: UPC: /2" x 10 7/8" 160 pp. $19.95/$22.00 Can. Part # HP1569 ISBN: EAN: UPC: /2" x 10 7/8" 144 pp. $23.95/$28.00 Can. metal FAbRicAtoR s FibERglAss & other composite materials Ron and Sue Fournier Forbes Aird A revised and updated guide to fiber reinforced plastic materials, including fiberglass, Kevlar, and carbon fiber. It also includes sections on mold making, plugs, materials, structures, gel coats, advanced building techniques, tools, and equipment. For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition. Road & Track MOTO Award Winner How to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping, and design techniques. Part # HP1498 ISBN: EAN: UPC: Part # HP709 ISBN: EAN: UPC: PRo PAint & body Jim Richardson This revised and updated bestselling edition includes current information on HVLP paint guns and equipment and waterborne paint technology. It also has sections on hammer and dolly, paintless dent removal, patching panels, spray guns and compressors, paint prep, shooting paint, color sanding, plastic bumper repair, and custom paint tips and tricks. sheet metal Ron and Sue Fournier Detailed information on how to form and shape sheet metal for competition, custom or restoration use. Chapters include hammer forming tools, terms and equipment, riveting techniques, layout, design, and patternmaking. A great companion to the Metal Fabricator s Handbook. Part #: HP1563 ISBN: EAN: UPC: Part # HP575 ISBN: EAN: UPC: /2" x 10 7/8" 144 pp. $25.00/$26.50 Can. Auto upholstery & interiors Bruce Caldwell A comprehensive guide to performing basic upholstery repairs, replacement kits, or custom interiors. Includes helpful sections on how to replace headliners, lay carpet, repair dashboards, reupholster seat frames, and install custom kits. Part # HP1265 ISBN: EAN: UPC: /2" x 10 7/8" 144 pp. $25.00/$26.50 Can. 7

9 HANDBOOKS EnginE AiRFloW Auto math Harold Bettes This informative guide to the science of engine airflow includes basic discussion on the chemistry of air and fuel, testing individual components such as cylinder heads, carbs, and throttle bodies, how to test an engine on a flowbench, how to analyze the numbers, and how to apply to performance modifications. John Lawlor & Bill Hancock This is a completely revised edition of the bestselling guide, with updated photographs, math equations, and formulas, as well as new chapters on computer technology, racing, aerodynamics, suspension, and chassis dynamics. Part # HP1537 ISBN: EAN: UPC: /2 x 10 7/8 160 pp. $25.00/$26.50 Can. Part # HP1554 ISBN: EAN: UPC: /2" x 10 7/8" 128 pp. $25.00/$26.50 Can. custom Auto WiRing & ElEctRicAl the ElEctRic vehicle conversion Matt Strong A hands-on guide to high performance and OEM automotive electrical systems. Covers electrical theory, wiring techniques and equipment, custom wiring harnesses for racing, hot rods and restorations, premade wiring harnesses, special electrical systems (navigational, audio, video), troubleshooting common electrical problems, dashboards and instrument, and trailer wiring. For street rods, street machines, all racing wiring and OEM applications. Mark Warner This informative guide details how to convert gas or diesel powered vehicles to electric power. It includes a background/history of electric vehicles, and pros and cons of owning electric vehicles, including motorcycles, scooters, light trucks, cars, race cars, Priuses, and boats. Part #: HP1568 ISBN: EAN: UPC: Part # HP1545 ISBN: EAN: UPC: /2" x 10 7/8" 192 pp. $25.00/$26.50 Can. EnginE builder s AutomotivE ElEctRicAl Tom Monroe Written for the serious hands-on automotive enthusiast or professional, this book provides general tips, techniques, and procedures that form the basis of all engine building. All of the information presented is easy to understand and illustrated with photos and line art throughout. It is a must-have reference for any automotive enthusiast, racer, or mechanic, and is a basic guide for stock engine rebuilding. Jim Horner Covers all the basics of automotive wiring. Explains electrical theory and how components work, step-by-step. Includes a detailed glossary of terms and symbols, and information on how to lay out circuit diagrams and apply them. Part # HP387 ISBN: EAN: UPC: " x 10" 160 pp. $25.00/$26.50 Can. Part # HP1245 ISBN: EAN: UPC: high FAstEnERs & Plumbing Mike Mavrigian The essential reference guide for understanding and selecting the right fastener and plumbing hardware for any automotive high performance, custom, or racing application. Includes sections on threaded fasteners, torque procedures, thread repair, wheel fasteners, engine studs, rivets, brake and coolant lines, AN hose assemblies, and clamps. 8 Part # HP1523 ISBN: EAN: UPC: /2" x 10 7/8" 176 pp. $19.95/$24.00 Can.

10 INDUCTION FuEl injection systems REbuilD & PoWERtunE carter/edelbrock carburetors Matt Cramer and Jerry Hoffman A practical guide to modifying and tuning modern electronic fuel injection (EFI) and electronic control unit (ECU) systems. Includes sections on standalones, an overview of EFI systems components and basic operation, fuel system and ignition requirements, sensors and how they work and interact with the ECU, aftermarket EFI systems, dyno and track testing, and aftermarket EFI conversions. Larry Shepard This easy-to-follow, step-by-step guide includes an overview of Carter/Edelbrock models TQ, AVS, AFB, and Thunder Series, carburetor parts and theory, carb selection, rebuilding, adjusting, tuning, and power engine packages. Part # HP1555 ISBN: EAN: UPC: /2 x 10 7/8 176 pp. $25.00/$26.50 Can. Part # HP1557 ISBN: EAN: UPC: /2 x 10 7/8 160 pp. $25.00/$26.50 Can. turbochargers street turbocharging Hugh MacInnes Timeless information on basic turbocharging theory and induction basics. Covers turbo theory, design, selection, installation, exhaust, lubrication, intercooling, high altitude application, water injection, and much more. Mark Warner A detailed handbook on the theory, design, and application of high-performance turbocharging. Analyzes each turbocharger component: the compressor, turbines, housing and rotating assemblies, exhaust system, boost control, water and fuel injection, and control systems. Covers dyno testing and tuning and a selection of various project vehicles to demonstrate many different applications. Part # HP49 ISBN: EAN: UPC: /2" x 10 1/2" 160 pp. $25.00/$26.50 Can. Part # HP1488 ISBN: EAN: UPC: /2" x 10 7/8" 208 pp. $25.00/$26.50 Can. WEbER carburetors Pat Braden Explains the basics of carburetion design and theory of operation. How to select, install, and tune for performance, troubleshooting and repair techniques on IMPE single throat, DGAV dual-downdraft, 32/34 DFT, 40 DCOE, and 40 IDA. Easy-to-follow instructions and photographs. RochEstER carburetors Doug Roe Covers all conventional models plus the latest Rochester electronic and computer command controlled (CCC) carburetors. Design, operation, rebuilding, modification and tuning of Rochester 2G and 4G models, the famous Quadrajet, and E4ME, E4MC, E2ME and E2MC. Part # HP774 ISBN: EAN: UPC: " x 10" 176 pp. $25.00/$26.50 Can. Part # HP014 ISBN: EAN: UPC: " x 10" 176 pp. $25.00/$26.50 Can. holley carburetors, manifolds & FuEl injection holley carburetor 4150 & 4160 Bill Fisher & Mike Urich This bestselling classic includes sections on the operation and installation of Holley s Pro-Jection fuel injection systems, troubleshooting, repair and performance tuning, and fuel system components. Covers carb models 2010, 2300, 4010/4011, 4150/4160, 4165/4175 and two and four barrel Pro-Jection systems. Selection, Tuning & Repair Mike Urich The complete guide for selecting, tuning, and repairing 4150 and 4160 Holley carburetors. Part # HP473 ISBN: EAN: UPC: " x 9" 80 pp. $16.00/$17.00 Can. 9 Part # HP1052 ISBN: EAN: UPC: /2" x 10 7/8" 224 pp. $25.00/$26.50 Can.

11 MERCHANDIZING AIDS Single-pocket wire counter & pegboardable rack. Holds approximately seven 8 1/2" x 11" format books. Great for cross-merchandizing. Part # ISBN: Two-pocket counter display. Holds approximately twelve 6" x 9" format books. Part # ISBN: pocket wire counter and pegboardable rack. Holds approximately /2" x 11" format books in side-by-side waterfall fashion. Adjustable peg hooks. If used on pegboard, additional lower support is suggested. Part # ISBN: SUPER RACK 10-pocket wire waterfall rack. Fits standard gondola (with easel folded or removed) or free standing using integral easel. When free standing a minimum of two racks should be used. Adjustable pegboard hooks allow rack to be placed where desired. Peg and socket connectors join racks for multiple display. Facing display maximizes sales potential. Five joined units fit a standard four-foot gondola section or endcap. Holds approximately /2" x 11" format books with 3 books per pocket. Part # ISBN: pocket wire floor spinner rack. Features four 8-pocket removable wings. Display may be set up using 2 wings (16-pockets), 3 wings (24-pockets) or 4 wings (32-pockets). Very high product density per square foot of floor space. Holds approximately up to /2" x 11" format books. Part # ISBN:

12 Excellence in Automotive Publishing HPBooks 2280 Grass Valley Hwy # 276 Auburn, CA Phone: Fax: hal.holding@us.penguingroup.com A Penguin Group (USA) Company penguin.com/hpauto Photo by James Occhipinti Printed in U.S.A.