Centrifugal pump T. Version
|
|
|
- Tyrone Jeffery Mosley
- 6 years ago
- Views:
Transcription
1 Version
2 Content Layout and areas of application for the KNOLL centrifugal pump...4 Pump overview...6 ype key and standard multirange motors... 7 Frequency inverter (FI)...8 Clean coolant pumps...10 Clean coolant pump G Clean coolant pump G Clean coolant pump G Clean coolant pump G Clean coolant pump G Clean coolant pump G Dirt coolant pumps...24 Dirt coolant pump F Dirt coolant pump F Dirt coolant pump S Dirt coolant pump SK Dirt coolant pump SK Dirt coolant pump SK Shredder pumps...38 Shredder pump SC Shredder pump SC
3 KNOLL centrifugal pumps are submersible pumps. hey are installed on unpressurized containers and submersed in the medium. hese flow machines are used primarily on machine tools to convey cooling lubricants. As return pumps, they transport the chips/cooling lubricant mixture to filters/separators. hey then supply the machines again with the cleaned cooling lubricant. hanks to their solid and robust design, the KNOLL coolant pumps have a high load capacity and a long durability. here are 5 different configurations: G with closed impeller For cleaned cooling lubricant with residual dirt F with non-clog impeller For contaminated cooling lubricant S with helical impeller For contaminated cooling lubricant with air SK with short helical impeller For contaminated cooling lubricant with short chips SC with helical impeller and shredder For contaminated cooling lubricant with long aluminum chips 4 5
4 Clean coolant pump G G ype code SC 65 63/ Submersible pump type Size Impeller index Motor power x 10 Immersion depth in mm G 40 G 50 G G 31 G Dirt coolant pump F, S, SK SK 65 SK 50 F F 40, S SK Shredder pump SC Application example SC 65-63/ SC Submersible pump type 65 Size 63 Impeller index Ø 163 mm 75 Motor power 7.5 kw 360 Immersion depth 360 mm Drives Standard multirange motors 2-pole, thermal class ISO-F, protection class IP54, IE kw to 5.5 kw 7.5 kw 230 V ( ) / 400 V (Υ), 50 z, 2,900 min-¹ 400 V ( ) / 690 (Υ), 50 z, 2,900 min-¹ 265 V ( ) / 460 V (Υ), 60 z, 3,500 min-¹ 460 V ( ), 60 z, 3,500 min-¹ Other voltages and efficiency classes on request. echnical data for the IEC/EN standard In order to minimize stress to the pump and motor, the switch-on frequency should not exceed once per minute. If this is not possible, the pump should run through. Rated power Switching frequency 0.1 kw to 2.6 kw 60 x / hour 3.0 kw to 5.5 kw 40 x / hour 7.5 kw to 10.0 kw 20 x / hour > 10.0 kw 15 x / hour SC 50 SC Note: he following characteristic curves refer to 50 z rotational speed and cooling lubricant (emulsion) with 1 mm²/s. Characteristic curves for other media, rotational speeds, and viscosities on request. he economically usable range is marked by dashed lines. 6 7
![90 10.80 14.80 Nominal output current [A] 2.30 3.10 4.00 5.60 7.50 9.50 13.00 17.80 at 400 V/8 kz Size A B C Weight including worktop [kg] 3.9 5.0 8.](/docs-images/73/68847664/images/5-2.jpg "7 Protection class IP 65 Max.")
![overload for 60 sec [%] 150 Mains voltage 3 AC 400 V - 15% to 480 V + 10% Mains frequency 50 / 60 z ± 6% EMC acceptance Compliant according to DIN EN 61800-3, class C2](/docs-images/73/68847664/images/5-3.jpg "Certificates and conformance CE and UL emperature range - 25 C (without condensation) up to + 50 C (without derating) Safety functions Over/under voltage, I²t limit, short")
5 Frequency inverter (FI) kw Advantages Compact dimensions by installing the inverter onto the terminal box (piggyback). KNOLL control know-how included. Design example: Shredder pump SC with frequency inverter Recommended motor power [kw] Line current [A] Nominal output current [A] at 400 V/8 kz Size A B C Weight including worktop [kg] Protection class IP 65 Max. overload for 60 sec [%] 150 Mains voltage 3 AC 400 V - 15% to 480 V + 10% Mains frequency 50 / 60 z ± 6% EMC acceptance Compliant according to DIN EN , class C2 Certificates and conformance CE and UL emperature range - 25 C (without condensation) up to + 50 C (without derating) Safety functions Over/under voltage, I²t limit, short -circuit, motor temperature, inverter temperature, anti-tipper protection, antilock Initial frequency range z Digital inputs 4 Fixed frequency 7 Digital outputs 2 Analog inputs 2 analog inputs (0 / 2-10 V, 0 / 4-20 ma) Analog outputs 0-10 V (-Imax = 10 ma) or 0-20 ma (load impedance R = 500 Ω) Process control Freely configurable PID controller Relay outputs 2 NO contacts 250 V AC 2 A USB- interface USB for M12 connector (converter RS485 / RS232) Manual control unit (optional) MMI with line Bus module (optional) Profibus DP, CANopen, EtherCA Safe stop Optional Characteristic curve A B Ø D z Motor power Installation size Main dimensions [mm] [kw] A B D A B B B C z 40 z 35 z 30 z
![- Delivery rate Delivery head Particle size Chip length % [l/min] [m] [mm]](/docs-images/73/68847664/images/6-3.jpg "[mm] G 20 10 100 6.")
![level Fluid level [mm] [mm] [mm] G 20 20 50 40 G 25 40 80 40 G 30 60 60 40](/docs-images/73/68847664/images/6-5.jpg "G 31 30 60 40 G 40 60 60 40 G 50 65 105 40 Fluid level Properties - No seal")
6 Clean coolant pumps KNOLL clean coolant pumps G are cooling lubricant pumps that convey slightly contaminated media. hese pumps are able to supply machines with cleaned cooling lubricant (incl. residual dirt). Maximum performance data ype Air portion Vol.- Delivery rate Delivery head Particle size Chip length % [l/min] [m] [mm] [mm] G G G G G G Fluid level ype Minimum distance Minimum fluid level Fluid level [mm] [mm] [mm] G G G G G G Fluid level Properties - No seal - Flexible design with standard motor - Energy efficient in conjunction with frequency converter - Very high efficiency thanks to favorably shaped impeller for optimal flow behavior - Impeller material POM/GJL-250 Minimum fluid level Minimum distance 10 11
7 Clean coolant pump G 20 G 20-71/ G 20-74/ G 20-71/ G 20-74/ Rp3/4 Ø 7 25 Ø Ø 115 Ø ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] Ø
![Clean coolant pump G 25 ype Weight Frequency Motor power Noise level [mm] [mm]](/docs-images/73/68847664/images/8-0.jpg "[kg] [z] (Nema Premium) [db(a)] [kw] G 25-70/30 332 332 391 57 50 3.")
8 Clean coolant pump G 25 ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] (Nema Premium) [db(a)] [kw] G 25-70/ G 25-00/ G 25-70/ G 25-00/ G 25-45/ (3.0) 71 G 25-60/ (3.7) 73 G 25-45/ (3.0) 71 G 25-60/ (3.7) Ø 11 Rp , , NW
9 Clean coolant pump G ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] G 30-../ G 30-../ / / 63 G 30-../ / / 65 G 30-../ / / 65 G 30-../ G 30-../ / / 63 G 30-../ / / 65 G 30-../ / / 65 G 30-../ / / 65 G 30-../ / / 65 Rp11/4 136 Ø , , Rp
![Clean coolant pump G 31 Rp11/4 90 ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw]](/docs-images/73/68847664/images/10-0.jpg "[db(a)] G 31-89/07 200 200 240 13.7 50 0.74 59 G 31-99/07 200 200 240 13.7 50 0.74 59 G 31-89/07 350 350 240 14.")
10 Clean coolant pump G 31 Rp11/4 90 ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] G 31-89/ G 31-99/ G 31-89/ G 31-99/ G 31-89/ G 31-99/ G 31-74/ G 31-82/ G 31-74/ G 31-82/ G 31-74/ G 31-82/ Ø 7 Ø 160 Ø Ø Ø
11 Clean coolant pump G 40 Rp11/ Ø ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] G 40-../ G 40-../ / / 65 G 40-../ / / 65 G 40-../ / / 69 G 40-../ G 40-../ / / 65 G 40-../ / / 65 G 40-../ / / 69 G 40-../ / / 65 G 40-../ / / 69 G 40-../ / / , , Rp
![Noise level [mm] [mm] [kg] [z] (Nema](/docs-images/73/68847664/images/12-1.jpg "Premium) [db(a)] [kw] G 50-20/40 440")
12 Clean coolant pump G Ø 11 ype * Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] (Nema Premium) [db(a)] [kw] G 50-20/ G 50-20/ G 50-35/ G 50-35/ G 50-50/ G 50-50/ G 50-65/ G 50-65/ G 50-20/ (5.5) 72 G 50-20/ (5.5) 72 G 50-35/ (7.5) 72 G 50-35/ (7.5) 72 * he following immersion depths are possible on request: 330 mm, 550 mm, 660 mm and 770 mm Rp ,5 12, NW
![- Delivery rate Delivery head Particle size Chip length Chip freight % [l/min] [m] [mm] [mm] [g/l] F 40 10 650 18 15 40 2 F 50 10 1200 26 30 70 5 S 40 50 550 18 12 20 2 SK 40 30 600 17 20 40 5 SK 50](/docs-images/73/68847664/images/13-1.jpg "30 1200 28 20 40 7 SK 65 30 1500 38 20 40 10 Fluid level ype Minimum distance Minimum fluid level Fluid level [mm] [mm] [mm] F 40 60 110 40 F 50 75 150 40 S 40 60 110 40 SK 40 70 80 40 SK 50 100 75")
13 Dirt coolant pumps KNOLL dirt coolant pumps F, S and SK are cooling lubricant pumps that convey very contaminated media. hese pumps are able to transport the chip/cooling lubricant mixture to filters or separators. Maximum performance data ype Air portion Vol.- Delivery rate Delivery head Particle size Chip length Chip freight % [l/min] [m] [mm] [mm] [g/l] F F S SK SK SK Fluid level ype Minimum distance Minimum fluid level Fluid level [mm] [mm] [mm] F F S SK SK SK Fluid level Properties - No seal - Flexible design with standard motor - Energy efficient in conjunction with frequency converter - Very high efficiency thanks to favorably shaped impeller for optimal flow behavior - Impeller material POM/GJL-250/S - Wear-resistant component design - With built-on inducer, to improve the intake behavior for media with high air load Minimum fluid level Minimum distance 24 25
14 Dirt coolant pump F 40 Rp11/ Ø ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] F 40-../ F 40-../ / / 63 F 40-../ / / 65 F 40-../ / / 65 F 40-../ / / 69 F 40-../ F 40-../ / / 63 F 40-../ / / 65 F 40-../ / / 65 F 40-../ / / 65 F 40-../ / / 65 F 40-../ / / ,5 12, Rp
![level [mm] [mm] [kg] [z] [kw]](/docs-images/73/68847664/images/15-1.jpg "[db(a)] F 50-.")
15 Dirt coolant pump F ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] F 50-../ / / 71 F 50-../ / / 71 F 50-../ / / 71 F 50-../ / / 71 Rp Ø , , Rp21/
![Dirt coolant pump S 40 ype Weight Frequency Motor power Noise level [mm]](/docs-images/73/68847664/images/16-1.jpg "[mm] [kg] [z] [kw] [db(a)] S 40-21/22 338 338 285 33 50 / 60 2.")
16 Dirt coolant pump S 40 ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] S 40-21/ / / 65 S 40-21/ / / 69 S 40-21/ / / 65 S 40-21/ / / 69 S 40-21/ / / 65 S 40-21/ / / 69 Rp11/ , Ø ,5 295 Rp
17 Dirt coolant pump SK 40 SK 40-../ / / 65 SK 40-../ / / 69 SK 40-../ / / 65 SK 40-../ / / 69 SK 40-../ / / 65 SK 40-../ / / 69 Rp11/ Ø ,5 ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] [kw] [db(a)] 12, Ø
18 Dirt coolant pump SK Ø 12,5 350 ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] (Nema Premium) [db(a)] [kw] SK 50-30/ SK 50-30/ SK 50-40/ SK 50-40/ SK 50-48/ SK 50-48/ SK 50-20/ (5.5) 72 SK 50-20/ (5.5) 72 SK 50-30/ (7.5) 72 SK 50-30/ (7.5) 72 * he following immersion depths are possible on request: 600 mm, 710 mm and 820 m 12.5 Rp Ø
![Noise level [mm] [mm] [kg] [z] (Nema Premium) [db(a)] [kw] 350](/docs-images/73/68847664/images/19-4.jpg "500 12.5 12,5 12.5 12,5 Ø 97 36 37")
19 Dirt coolant pump SK 65 SK 65-../ SK 65-../ SK 65-../ SK 65-../ SK 65-../ (5.5) 72 SK 65-../ (7.5) 72 SK 65-../ (5.5) 72 SK 65-../ (7.5) 72 Rp21/ Ø ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] (Nema Premium) [db(a)] [kw] , ,5 Ø
20 Shredder pumps KNOLL shredder pumps SC are cooling lubricant pumps with an integrated shredder for aluminum chips. hese pumps are able to shred long aluminum chips into pump-appropriate size and to convey them to the central preparation station with the help of cooling lubricant. herefore, an additional chip reducer is not necessary. Maximum performance data ype Air portion Vol.- Delivery rate Delivery head Chip thickness Chip freight % [l/min] [m] [mm] [g/l] SC SC Fluid level ype Minimum distance Minimum fluid level Fluid level [mm] [mm] [mm] SC SC (170*) * Dimension valid for SC 65- / 500 Fluid level Properties - Flexible design with standard motor - Energy efficient in conjunction with frequency converter - Storage is protected by shaft sealing ring - Rigid shaft through bearing of the cutting head in a ceramic precision bearing - Durable and low-maintenance due to hardened hydraulic and reducer components - alf-open radial impeller - Impeller material S Container design Minimum volume: 250 l Minimum wall thickness : 5 mm 150 Minimum fluid level Minimum distance 38 39
21 Shredder pump SC 50 SC 50-30/ SC 50-30/ SC 50-40/ SC 50-40/ SC 50-48/ SC 50-48/ SC 50-20/ (7.5) 72 SC 50-20/ (7.5) 72 SC 50-30/ (7.5) 72 SC 50-30/ (7.5) 72 * he following immersion depths are possible on request: 610 mm, 720 mm and 830 mm Ø 12,5 20 ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] (Nemia Premium) [db(a)] [kw] Rp Ø
![[z] (Nemia Premium) [db(a)] [kw] SC 65-50/55 360 363 573 110](/docs-images/73/68847664/images/22-1.jpg "50 5.5 68 SC 65-63/75 360 363 573 110 50 7.")
22 Shredder pump SC Ø 12, ype Weight Frequency Motor power Noise level [mm] [mm] [kg] [z] (Nemia Premium) [db(a)] [kw] SC 65-50/ SC 65-63/ SC 65-50/ SC 65-63/ SC 65-50/ (5.5) 72 SC 65-63/ (7.5) 72 SC 65-50/ (5.5) 72 SC 65-63/ (7.5) 72 Rp21/ Ø
23 KNOLL Maschinenbau Gmb Schwarzachstraße 20 DE Bad Saulgau el Fax info.itworks@knoll-mb.de Right reserved to modify technical details.
Centrifugal pumps. Version
Version 08-2018 2 Content KNOLL.It works... 4 Layout and areas of application for the KNOLL centrifugal pump....6 Type key and standard multirange motors....7 Frequency inverter (FI)...8 Block pumps...10
Centrifugal pumps type T. Version
type T Version 4-215 Content Layout and areas of application for the KNOLL centrifugal pump... 3 Pump overview... 4 Type key and standard multirange motors... 5 Clean coolant pump TG 2...6 Clean coolant
Screw pumps KTS. Version
Version 02-2017 2 Content. KNOLL.It works.... 4 Advantages, features, layout... 8 Type code, equipment, specifications, testing... 10 Recommended filter quality, KTS selection... 11 2,900 rpm 50 Hz Capacity
SCREW SPINDLE PUMPS COOLING, LUBRICATING, CHIP HANDLING, PRESSURE BOOSTING, FLUSHING, MAINTAINING TEMPERATURES...
2018 SCREW SPINDLE PUMPS COOLING, LUBRICATING, CHIP HANDLING, PRERE BOOSTING, FLUSHING, MAINTAINING TEMPERATURES... www.brinkmannpumps.com Content Technical Information Electrical Features 4 8 Control
COOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES.
5 Screw Spindle Pumps COOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES www.brinkmannpumps.de GB Story Engineering Each Brinkmann Pump is embedded with often many years of research, including internal
SCREW SPINDLE PUMPS COOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES.
SCREW SPINDLE PUMPS COOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES www.brinkmannpumps.de GB Story Engineering Each BRINKMANN Pump is embedded with often many years of research, including internal
Electric Immersion Pumps PXA and PXK, sealless
1-6062-US PXA and PXK, sealless MQUALITY MANAE ENT Cooling and lubricating with high-pressure... Centrifugal pumps for delivery pressures up to 25 bars Technical data Delivery rate Q max = 185 l/min Delivery
INVEOR "Smart connections." on five levels
INVEOR "Smart connections." on five levels 1 The Inveor 3 Operation and observation IP65 protection class Integrated soft PLC Pre-fitted cable glands Fan-free design up to 7.5 kw Robust and vibration-resistant
PRA Centrifugal pumps
1 6001-EN PRA Centrifugal pumps Technical data Delivery rate Q max = 130 l/min Delivery head H max = 30 m Temperature range T = 5 C to 60 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN
Centrifugal pumps. Main catalogue.
Main catalogue 1 6667 EN Centrifugal pumps for machine tools and filter systems, printing and packaging machines, temperature control units Quality Management DIN EN ISO 9001:08 www.spandaupumpen.com Environmental
Low voltage AC drives
General machinery drives Main features and dimensions Unique features Fast and extensive I/O PID control Application macros Many installation possibilities 200 to 480 V, 1-phase or 3-phase More value for
Electrical data Nominal voltage AC/DC 24V Nominal voltage frequency 50/60Hz
GR24A-5 / -7 GR24A-5 Rotary actuator for rotary valves GR24A-7 Rotary actuator for rotary valves Nominal torque 40Nm Nominal voltage AC/DC 24V Control Open-close echnical data Electrical data Nominal voltage
PSR Centrifugal pumps
1 65 EN Centrifugal pumps Technical data Delivery rate Q max = 180 l/min Delivery head H max = 255 m Temperature range T = -10 C to +80 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN ISO
ProMinent Sigma/ 3 Motor Diaphragm Metering Pumps
Overview: Sigma/ 3 (S3Cb) The Sigma/3 motor diaphragm are produced with a high-strength metal inner housing for parts subject to load as well as an additional plastic housing to protect against corrosion.
ILA2D572TC1F0 integrated drive ILA with servo motor V - DeviceNet - indus connector
Characteristics integrated drive ILA with servo motor - 24..48 V - DeviceNet - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Phase
Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
echnical data sheet SH24A-SR.. Modulating linear actuators for adjusting air dampers and slide valves in ventilation and air conditioning systems in buildings For air dampers up to approx. 3 m 2 Actuating
PS/PSL Centrifugal pumps
1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN
Presentation Soft starters 0 Altistart 48 soft start - soft stop units
Presentation Soft starters 5 6 7 65_Ver.-EN.fm/ Presentation (continued) Soft starters Applications The Altistart 8 soft start - soft stop unit is a controller with 6 thyristors which is used for the torque-controlled
See «Overview of types»
echnical data sheet SHA-.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air conditioning systems in buildings For air dampers up to approx. 3 m Actuating
Submersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
ILE1F661PC1A0 brushless dc motor V - CANopen DS301 interface - L = 122 mm - w/o gearbox
Characteristics brushless dc motor 24..36 V - CANopen DS301 interface - L = 122 mm - w/o gearbox Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network
ILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1
Characteristics brushless dc motor 24..48V- EtherNet/IP interface - L = 174 mm- 18:1 Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number
Immersion Pumps PS and PSL ( Slurp Pump ) sealless
Immersion Pumps PS and PSL ( Slurp Pump ) sealless 1-6014-US Centrifugal pumps of metal for clean, polluted and viscous fluids Technical data Delivery rate Q max = 1250 l/min Delivery head H max = 105
Electrical data Nominal voltage AC 230 V Nominal voltage frequency
echnical data sheet NRA Rotary actuator for ball valves Nominal torque Nm Nominal voltage AC V Control Open-close, -point echnical data Electrical data Nominal voltage AC V Nominal voltage frequency 5/6
High performance Vector Control. Ratings. System configuration
System configuration High performance Vector Control Low harmonic or regenerative drive IP54 full range Compact design and robustness Built-in filter (according to C3 class) Built-in fuses (from 200 kw)
Pressure boosting Single pumps
Series description Wilo-Economy MHI Design Non-self-priming multistage pump Application Water supply and Commerce and industry Cooling water circulation systems Washing and sprinkling systems Type key
ILA1F572PB1F0 integrated drive ILA with servo motor V - CANopen - PCB connector
Characteristics integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1860.00 USD Main Range
3/2 and 4/2 directional seat valves with solenoid actuation
1/16 /2 and 4/2 directional seat valves with solenoid actuation RE 22047-XH-B2/09.12 Replaces: 05.12 ype E-.SE 6...X... ype W-.SE 6...X... Size 6 Component series 6X Maximum operating pressure 420 bar
ILE1B661PC1A1 brushless dc motor V - Profibus DP interface - L = 174 mm - 18:1
Characteristics brushless dc motor 24..36 V - Profibus DP interface - L = 174 mm - 18:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1640.00 USD Main Range
ILE1F661PB1A0 brushless dc motor V - CANopen DS301 interface - L = 122 mm - w/o gearbox
Characteristics brushless dc motor 24..36 V - CANopen DS301 interface - L = 122 mm - w/o gearbox Product availability : Stock - Normally stocked in distribution facility Price* : 840.00 USD Main Range
High Pressure Centrifugal Pumps Product Overview
High Pressure Centrifugal Pumps Product Overview High Pressure Centrifugal Pumps Product Overview Wilo-Economy MHI Duty chart H[m] 6 5 4 Wilo-Economy-MHI 5 Hz Non self-priming pumps for: Water supply and
Essential equipment for all your requirements
NEW CTX CONTACTORS Essential equipment for all your requirements 9 A TO 310 A THREE-POLE INDUSTRIAL CONTACTORS CTX three-pole industrial contactors, a sense of family The new range of CTX contactors provides
Max. particle size 50 µm Max. oil content of compressed air
1 Version Poppet valve Control Analog Certificates CE declaration of conformity Ambient temperature min./max. +0 C / +70 C Medium temperature min./max. +0 C / +70 C Medium Compressed air Max. particle
ABB component drives ACS150, 0.5 to 5 Hp
ABB component drives ACS150, 0.5 to 5 Hp Technical Catalog BUSINESS PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES Contents Choice 1: Simply contact your local ABB drives sales office
Panasonic G-series. Small ac geared motors & brake motors. ideas in motion
Small ac geared motors & brake motors ideas in motion geared motors 6W to 90W 2 Panasonic, one of the largest motor manufacturers in the world, have designed and developed the G-series range of geared
5" SUBMERSIBLE PUMPS. by Franklin Electric
5" SUBMERSIBLE PUMPS INDEX NAUTI VN 5" Submersible Pumps... 2 General Product Curves... 3 Material Table... 3 Technical Data and Performance Curves VN 3..................................................................................................
Technical data. Safety notes
echnical data sheet SM4A-S-P Damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque Nm Nominal
Product Data Sheet DV5214 NU
The engineer's choice DV5214 NU INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
See «Overview of types» 90 s / 60 mm 150 s / 100 mm Manual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool
echnical data sheet LHA-MF.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
TOP MULTI. Submersible multi-stage pumps TOP MULTI 1 TOP MULTI 2-3. PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 42 m
TOP MULTI Submersible multi-stage pumps Clean water Domestic use Civil use TOP MULTI 1-3 PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 42 m APPLICATION LIMITS Immersion depth: up to
Lexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
3/2 and 4/2 directional seat valves with solenoid actuation
1/16 3/ and 4/ directional seat valves with solenoid actuation RE 047-XH-B/01.10 Replaces: 09.07 ype E-.SE 6...XH ype W-.SE 6...XH Size 6 Component series 6X Maximum operating pressure 40 bar Maximum flow
Standard Features 200-600V, 50/60Hz input power supply Built-in run rated (AC1) By-pass contactor up to 820 A * Rated 450% current Conformal coated circuit board Voltage ramp or current limit start modes
5" SUBMERSIBLE PUMPS _ed.12/2014. Single member - Company subject to the control and coordination of Franklin Electric Co., Inc.
Vertical S.r.l. via Asolo, 7 36031 Dueville (Vicenza) - Italy Tel. +39 0444 361114 Fax +39 0444 365247 P.IVA e C.F. 00558130241 e-mail: sales@vertical.vi.it www.etechpumps.com Single member - Company subject
TRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
Industrial PFC UPS System
Based on Statron s leading A.T.I.S. (Advanced Technology Industrial System) platform, the S3000 range is a true-industrial UPS system using the latest Power Factor Corrected (PFC) IGBT rectifier technology.
Immersion Pumps PMS and PMS-T sealless
Immersion Pumps PMS and PMS-T sealless 1-6033-EN Centrifugal pumps of metal with high resistance to wear for diverse industrial fluids Technical data Delivery rate Q max = 400 l/min Delivery head H max
Delta Products VFD CP2000 Bypass Control Packages.
Delta Products VFD CP2000 Bypass Control Packages www.deltaww.com Delta Products VFD CP2000 Bypass Control Packages The Delta Products VFD CP2000 Bypass Control Packages are designed for the Delta Products
Vertical Immersion Pump VTP - BBF
MB / General VTP centrifugal pumps in block design (BBF) correspond to the system of two-pipe pumps. Basically these immersion pumps are single-level immersion pumps with vertical axis the main components
The smd frequency inverter Compact, powerful, without compromise simply smart
The smd frequency inverter Compact, powerful, without compromise simply smart smart micro drive The compact smd for large tasks 2 Do you work with digital and analog inputs, preset speeds or a display
Electric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
Page - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
Series description: Wilo-Drain STS 40
Series description: Wilo-Drain STS H/m 12 Wilo-Drain STS 1 8 6 2 2 6 8 1 12 1 16 Q/m³/h Design Submersible sewage pump Application Pumping of heavily contaminated fluids for: Domestic and site drainage
60Hz HORIZONTAL MULTISTAGE PUMPS
6Hz HORIZONTAL MULTISTAGE PUMPS INDEX EH Stainless Steel Horizontal Multistage Pump................................................................ 2 General Product Curves..................................................................................
Cabinet-built single drives, ACS880-07
Cabinet-built single drives, ACS880-07 Our cabinet-built single drives are built to order, meeting customer needs despite any technical challenges. Designed on ABB's common drives architecture, this compact
better measurement Simply a question of
Simply a question of better measurement SCHMIDT Flow Sensor SS 2.415 and SS 2.515 The tried and tested measurement experts for the monitoring of laminar flows extremely precise and quickly installed Industrial
Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses
Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Type 8644 can be combined with... Fully compatible with WAGO I/O Combination of Fieldbus, pilot valves and I/O modules High
Pressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
Small centrifugal fans made of plastic
Small centrifugal fans made of plastic durable application-optimised wide range of variants 2 Small centrifugal fans made of plastic Index Small centrifugal fans made of plastic HF R 75-16 D and HF R 110-18
Output signal active note. Measuring range rel. pressure. Electrical Data Power supply DC V, ±10%, 1.1 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges and outputs 0 to 5/10 V or 4 to 20 ma. NEMA 4X / IP65 rated enclosure. For monitoring the differential pressure
Movement by Perfection. ECblue. High-efficiency motors 10/2016 Edition
Movement by Perfection ECblue High-efficiency motors Edition Information ECblue EC motor catalogue Other catalogues In the ZIEHL-ABEGG catalogues, the reader can find out all about ZIEHL-ABEGG fans, motors
ProMinent Sigma/ 1 Motor Diaphragm Metering Pumps
Overview: Sigma/ 1 (S1Cb) The Sigma/1 motor diaphragm are produced with a high-strength inner housing for parts subject to load as well as an additional plastic housing to protect against corrosion. The
Power consumption In operation At rest For wire sizing. Functional data Torque Motor Spring return. Rated impulse voltage Control pollution degree 3
SRFA Rotary actuator with emergency function for ball valves Torque 20Nm Nominal voltage AC 24...240V / DC 24...125V Control: Open/Close SRFA: Deenergised NC Technical data Electrical data Nominal voltage
ILE2T661PB1A3 brushless dc motor V - Modbus TCP interface - L = 174 mm - 54:1
Characteristics brushless dc motor 24..48 V - Modbus TCP interface - L = 174 mm - 54:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1540.00 USD Main Range of
Submersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
Product Data Sheet 632 NU-006
The engineer's choice 632 NU-006 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
Series description: Wilo-Drain TM/TMW/TMR 32
Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled
RADIAL STEEL HIGH PRESSURE RHD 5/ RHD 4/ RHD 8/ RHD 11/ RHD 9/ RHD 13/ CAS... 8 CAM ACCESSORIES...
RADIAL STEEL HIGH PRESSURE RHD 5/10... 2 RHD 4/20... 3 RHD 8/25... 4 RHD 11/40... 5 RHD 9/60... 6 RHD 13/90... 7 CAS... 8... 14 ACCESSORIES... 18 1 RHD 5/10 A 230 / B 335 / C 385 / D 130 / E 140 / F 360
S4G Series. Technical Guide. 4 submersible pumps
SG Series Technical Guide submersible pumps SG Series t Index Sectors of application... Technical characteristics SG... 5 Table of materials and identification data... 6 Nominal data... Hydraulic performance
Max. oil content of compressed air
1 Version Control Certificates Ambient temperature min./max. Medium temperature min./max. Medium Poppet valve Analog CE declaration of conformity +32 F / +15 F +32 F / +15 F Compressed air 0012533 Max.
Clamping and drive module
Clamping and drive module RE 51147/10.05 Replaces: 04.02 1/14 Type UPE 3 Drive power 3.0 kw / 4.0 kw Series 1X Maximum operating pressure 700 bar H6842 Overview of contents Contents Page Features 1 Application
Model ED 720 Drying and heating chambers Classic.Line with natural convection
Model ED 720 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the
Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz
Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M600 features Easy click-in keypad
Temperature Sensor without thread
1 Product Information TFP-49, -169, -189, -06 Temperature Sensor without thread Application / Specified Usage Authorizations Installation in thin-walled pipes and vessels No product contacting of the sensor
Tender Text. Company name: Created by: Phone: Date: 3/13/2017. Product No.: CRE 5-20 AN-FGJ-A-E-HQQE
Tender Text Product No.: 9685315 CRE 5-2 AN-FGJ-A-E-HQQE Product photo could vary from the actual product Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation:
Model ED 400 Drying and heating chambers Classic.Line with natural convection
Model ED 400 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the
ABB drives for water and wastewater ACQ to 500 kw
Low voltage AC drives ABB drives for water and wastewater ACQ810 0.37 to 500 kw The intelligent drive choice for water and wastewater applications The ACQ810 drive for water and wastewater applications
Submersible Electric Pumps for Solid-laden Wastewater. DOMO Series
Submersible Electric Pumps for Solid-laden Wastewater Series The series electric pumps are available with twin-channel or vortex impeller ( VX). Designed to handle suspended solids up to 50 mm in diameter
J1000. Compact Inverter Series.
J1000 Compact Inverter Series www.yaskawa.eu.com Focus on Application Customer orientation and application focus two attributes of machine equipment YASKAWA offers with its J1000 compact inverter drive
Low voltage AC drives. ABB micro drives ACS to 3 hp/0.18 to 2.2 kw Catalog
Low voltage AC drives ABB micro drives ACS55 0.25 to 3 hp/0.18 to 2.2 kw Catalog ACS55 IP20 Overview ACS55 micro drives are designed for use in a wide variety of simple machinery applications where only
Series description: Wilo-Drain TM/TMW/TMR 32
Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled
Pressure regulators E/P pressure regulators Series ED02. Brochure
Pressure regulators E/P pressure regulators Series ED0 Brochure Pressure regulators E/P pressure regulators Series ED0 E/P pressure regulator, Series ED0 Qn= 10 l/min compressed air connection output:
Company name: Created by: Phone:
Qty. Description 1 CRE 1-5 A-FJ-A-E-HQQE Date: /3/17 Product No.: On request Note! Product picture may differ from actual product The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor
Modular pneumatic valve island
Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with
mass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
PAB Atex-certified centrifugal pumps
1 6036 EN PAB Atex-certified centrifugal pumps Technical data Delivery rate Q max = 305 l/min Delivery head H max = 20 m Temperature range 0 C to +60 C Quality Management DIN EN ISO 9001: 2008 Environmental
NDR Series Rotor Pack
efore using the product, please check the DR Series Rotor ack Features Low noise chieves a noise level of no greater than 0 d () and there is no need to worry about hydraulic noise even at factories in
Lowara. 8 Submersible Electric Pumps. 6Z855, 6Z875 6Z895, 6Z8125 Series. 60 Hz
8 Submersible Electric Pumps 6Z855, 6Z875 6Z895, 6Z8125 Series 60 Hz 6Z855, 6Z875, 6Z895, 6Z8125 SERIES HYDRAULIC PERFORMANCE RANGE AT 60 Hz PRINT 10-2006 2 CONTENTS 6Z8 Series Specifications...5 Table
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
Magnetic-Inductive Flow Meter FMI
SENSORS FOR FOOD AND BIO. Product information FMI-C, FMI-R FOOD Magnetic-Inductive Flow Meter FMI Application/Specified usage Magnetic-inductive flowmeter for the measurement of flow rate and volume in
Content. Page 4 7. Technical Information Electrical. Models and Applications Technical Information Potentials for energy savings
Content Technical Information Electrical Page 4 7 Models and pplications Technical Information Potentials for energy savings 8 0 High Pressure Pumps BFS, FFS / 50 Hz BFS2, FFS2 / 50 Hz High Pressure Pumps
POWER kva
TECHNICAL DATA SHEET B9000 FXS 60-80-100-125-160kVA +44 (0)20 8868 3732 GENERAL INFORMATION UPS Type ON LINE Double Conversion Nominal output power (Cos φ 0,8) kva 60 80 100 125 160 Nominal output power
Magnetic Inductive Flow
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 (0) 9402-9383 - 0 Fax +49 (0) 9402-9383 - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Magnetic Inductive Flow Characteristics
HYBRID HYDRAULIC O OIL COOLING EQUIPMENT O-1
HYBRID HYDRAULIC O OIL COOLING EQUIPMENT O-1 List of Hybrid Unit Models Various specifications for each model. DAIKIN s lineup provides a variety of functions and capacities depending on the machine type.
MINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP
MINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP CMI Summary table Essential characteristic of the control unit compact CMI is the arrangement of the motor pump unit completely immersed in the oil inside
RE, RED. Electronically Controlled Inverter Driven Circulation Pump. Twin Execution ENERGY EFFICIENCY OF CIRCULATING PUMPS
, RED Electronically Controlled Inverter Driven Circulation Pump Twin Execution ENERGY EFFICIENCY OF CIRCULATING PUMPS Directive of the European Parliament COMMISSION REGULATION (EC) No. 641/2009 and 622/2012
Pressure regulators E/P pressure regulators Series EV04. Brochure
Pressure regulators E/P pressure regulators Brochure Pressure regulators E/P pressure regulators E/P pressure regulator, Qn= 50 l/min Compressed air connection output: G /8 Electr. connection: Plug, EN
Operating Instructions
Operating Instructions BE2700 Brinkmann Immersions pumps of the series TA/STA/TAL/SAL901... 1303 Contents 1 General...1 2 Safety...2 3 Transport and storage...2 4 Description of product and accessories...2
Electric Immersion Pumps PRT and PRA, sealless
PRT and, sealless MQUALITY MANAGE ENT Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 20 l/min Delivery head H max = 32 m Temperature range -30