Brand overview DeguDent alloys

Size: px
Start display at page:

Download "Brand overview DeguDent alloys"

Transcription

1 rand overview DeguDent alloys lloy Description omposition in mass-% Introduced (year) Type olour Indications u-/pt groupmetals u Pt Pd g u Sn Zn In Other io M 2006 extra hard yellow Ir: hard yellow Ir: 0.1 M 1955 extra hard yellow 4, 6, Ir: 0.1 MO 1962 extra hard yellow 4, 6, Ir: 0.1 NF IV 1977 extra hard bright yellow 4, 5, Ir: 0.1 Degudent Degudent Eco 2010 extra hard white 4, 6, Ta: 0.2; Ru: 0.1 Degudent G 1974 extra hard yellow Rh: 1.6; Ta: 0.5 Degudent H 1977 extra hard bright yellow 4, 6, Ta: 0.1 Degudent Kiss 2004 extra hard bright yellow 4, 6, Ir: 0.1; Ta: 0.2 Degudent LTG 1995 extra hard yellow 4, 5, 7 8) Ir: 0.1 Degudent U 1967 extra hard white 4, Ir: 0.1; Re: 0.2; Fe: 0.2 Degudent U extra hard white 4, Ir: 0.1; Re: 0.2; Ta: 0.2 Degunorm Degunorm 1992 extra hard yellow 4, 5, 7 8) , Ir: 0.1 Degunorm eco 2001 extra hard bright yellow 4 8) Ir: 0.1 Degunorm logic 2001 extra hard yellow 4 8) 10) Ir: 0.1; Rh: 0.6; Ta: 0.4 Degunorm pur 200 extra hard yellow 4 8) 10) Ir: 0.1; Ta: 0.1 Degunorm supra 200 extra hard yellow 4, 5, 7 8) Ir: 0.1 iocclus iocclus extra hard yellow Rh: 0.7; Ta: 0. iocclus HT 2001 extra hard yellow Ir: 0.1; Rh: 0.4; Nb: 0.1; Fe: 0.2 iocclus inlay 1996 hard yellow Ir: 0.1 iocclus Kiss 2005 extra hard yellow Ir: 0.1; Nb: 0.4 iocclus N 1997 extra hard yellow Ir: 0.1; Rh: 0.2; Nb: 0.4; Fe: 0.2 Econolloy Econolloy 2004 extra hard bright yellow 4 8) Ir: 0.1 Econolloy g 2006 extra hard white 4 8) Ir: 0.1 Econolloy Pd 2006 extra hard white 4, 5, Ru: 0.2 n idea that made all the difference. lways seductively aesthetic. In 1950, a high-gold precious alloy opened up new horizons in dental technology:. This material ushered in a new era for crowns, bridges and inlays in terms of processability, durability, safety and compatibility. With, both laboratories and dentists continue to set standards to this day. In 1964, the desire to provide aesthetic veneers gave rise to the introduction of the Degudent ceramic-bonding precious alloy. Ease of processing and clinical safety have made Degudent an established factor in prosthodontics for almost 50 years. Degudent is the standard in metal-ceramics for laboratories and dentists alike.

2 asting Parameters Heat-soaking Oxidation Porcelains Melting range Preheating temperature asting temperature With open flame Propane /O 2 With resistance-heated melting systems 9) With HF- and arccasting-devices io M s 10 s 0 s 5 s 10 s s 10 s 0 s 5 s 10 s M s 10 s 0 s 5 s 10 s MO s 10 s 0 s 5 s 10 s NF IV s 10 s 0 s 5 s 10 s T ( ) / t (min) V = Vacuum = tmosphere Degudent Degudent Eco s 10 s 180 s 5 s 10 s 90 / 5 / Degudent G s 10 s 60 s 5 s 10 s 90 / 5 / Degudent H s 10 s 120 s 5 s 10 s 90 / 5 / Degudent Kiss s 10 s 120 s 5 s 10 s 90 / 5 / Degudent LTG s 10 s 0 s 5 s 10 s 780 / 5 / V Degudent U s 10 s 180 s 5 s 10 s 90 / 5 / Degudent U s 10 s 180 s 5 s 10 s 90 / 5 / Degunorm Degunorm s 10 s 0 s 5 s 10 s 780 / 5 / V Degunorm eco s 10 s 0 s 5 s 10 s 780 / 5 / V Degunorm logic s 10 s 0 s 5 s 10 s 780 / 5 / V Degunorm pur s 10 s 0 s 5 s 10 s 780 / 5 / V Degunorm supra s 10 s 60 s 5 s 10 s 780 / 5 / V iocclus iocclus s 10 s 60 s 5 s 10 s 90 / 5 / iocclus HT s 10 s 60 s 5 s 10 s 900 / 5 / iocclus inlay s 10 s 0 s 5 s 10 s iocclus Kiss s 10 s 60 s 5 s 10 s 90 / 5 / iocclus N s 10 s 60 s 5 s 10 s 900 / 5 / Econolloy Econolloy graphite crucible 0 s 5 s 10 s HF 1400 ceramic crucible 5 s 10 s 120 s 5 s 10 s 14) Econolloy g s 10 s 120 s 5 s 10 s 800 / 5 / V Econolloy Pd s 10 s 180 s 5 s 10 s 980 / 10 / Multi-talented in every respect. Powerful and naturally beautiful. Degunorm is the most popular high-gold precious alloy in Germany. It is also the most important supporting pillar of the GoldenGate System because of its rich golden hue, versatile indications, low number of different materials needed and vast body of clinical evidence. Degunorm achieving more with less. This is what laboratories and dentists have trusted in for almost 20 years. iocclus represents a unique set of bioalloys that meet all the expectations of even the most demanding patient. Its optimized microstructure ensures high-strength during ceramic firing for optimum firing results. With iocclus, dental laboratories and dentists meet the demand for better compatibility and a more natural appearance.

3 nnealing temperature Specifications verage linear TE µm / m K Vickers hardness HV 5 0,2 % yield strength 11) N/mm² Tensile strength 11) N/mm² Elongation 11) % Density / 15 min ( ) ( ) w h c / f c / f h c / f h c / f h g / cm³ io M 15) M MO NF IV Degudent Degudent Eco Degudent G Degudent H Degudent Kiss Degudent LTG 15) Degudent U Degudent U Degunorm Degunorm Degunorm eco Degunorm logic 15) Degunorm pur Degunorm supra iocclus iocclus iocclus HT iocclus inlay 15) w = w = 70 4 w = iocclus Kiss 15) iocclus N Econolloy Econolloy w = Econolloy g Econolloy Pd Indications 2 single-surface fillings, multi-surface fillings; onlays, partial crowns and crowns Economical is better than cheap. Econolloy combines the processing benefits of a precious alloy with cost-optimized prosthetic options. Econolloy is an excellent material for use by laboratories and dentists in price-sensitive markets. Multi-surface fillings; crowns, bridges of smaller span width (if bridge cross-section is sufficient) 4 Multi-surface fillings; crowns; milled units; bridges of any span width 5 Model-cast framework dentures (large connector) 6 Model-cast dentures 7 Superstructures

4 onnection technology lloy Solders (working temperatures) Solders after porcelain firing Weldability by laser For alloys for ceramics: Solders before porcelain firing With same type of material io M iolor-solder G 820 (820 ) M Unilot 1 (820 ) / 2 (760 ) / -Solder 0 (840 ) / 1 (800 ) / 2 (745 ) / MO Degunorm-Solder 700 (700 ) NF IV 10067/ 102 /Z Last Revision: 02/ 201 G Degudent Degudent Eco Degudent-Solder U1W (1120 ) / N1 (1060 ) / N1W (1070 ) -Solder 2 (745 ) / Stabilor-Solder 710 (710 ) Degudent G Degudent-Solder G1 (100 ) Solder DG 750 (750 ) Degudent H Degudent-Solder N1 (1060 ) / N1W (1070 ) Unilot 2 (760 ) / -Solder 2 (745 ) Degudent Kiss Degudent-Solder N1 (1060 ) / U1W (1120 ) Solder DG 750 (750 ) Degudent LTG Degunorm-Solder 880 (880 ) / 90 (90 ) Degunorm-Solder 700 (700 ) Degudent U Degudent-Solder U1 / U1W (1120 ) / N1 (1060 ) / N1W (1070 ) Unilot 2 (760 ) / -Solder 2 (745 ) Degudent U94 Degunorm Degunorm Degunorm-Solder 880 (880 ) Degunorm-Solder 700 (700 ) Degunorm eco Degunorm logic iocclus-solder G 870 (870 ) / iocclus-solder G 710 (710 ) Degunorm pur Degunorm-Solder 880 (880 ) / 90 (90 ) Degunorm supra iocclus-solder G 710 (710 ) / Degunorm-Solder 700 (700 ) iocclus iocclus 4 Degudent-Solder G1 (100 ) Solder DG 750 (750 ) iocclus HT iocclus inlay Solder DG 750 (750 ) iocclus Kiss Degudent-Solder G1 (100 ) Solder DG 750 (750 ) iocclus N Econolloy Econolloy iocclus-solder G 870 (870 ) iocclus-solder G 710 (710 ) Econolloy g Degunorm-Solder 880 (880 ) / 90 (90 ) Degunorm-Solder 700 (700 ) Econolloy Pd Degudent-Solder U1 / U1W (1120 ) / N1 (1060 ) / N1W (1070 ) -Solder 2 (745 ) / Stabilor-Solder 710 (710 ) 1) Processing notes Porcelains 8) For direct casting of attachment or implant components, these must be well encased (about 0.5 mm), so that the coefficient of thermalexpansion does not cause cracks in the dental porcelain. 9) Shorten the heat-soaking period by 15 s for the Prestomat compact. 10) Up to 8 units. 11) Measurment of samples in accordance with ISO 1562 or ISO 969 or ISO ) fter prerinsing with Degudent Solder N1W or for soldering on directly with Oxynon soldering flux. 14) No need to oxidise, if necessary 800 / 5 /. 15) The maximum hardness is achieved by cooling in the casting mould or by porcelain firing. Only fusing in ceramic crucible. c Hardness that can be achieved by slow cooling in the casting mould (for crown and bridge alloys). f Hardness that can be achieved after porcelain firing (for ceramic alloys). w Soft h Hardend Duceram Kiss, Duceram Plus Duceragold Kiss, Duceragold love Duceram love 1) For soldering after porcelain firing in the combination Stabilor G, GL / silver-free u-pd or Pd-based alloys for ceramics. fter casting

5 DeguDent alloy overview Gold-reduced lloy Description omposition in mass-% Introduced (year) veneerable with high fusing ceramics Type olour Indications u Pt Pd g u Sn Zn In Other iocclus Kiss 2005 extra hard yellow Ir: 0.1; Nb: 0.4 iocclus HT 2001 extra hard yellow Ir: 0.1; Rh: 0.4; Nb: 0.1; Fe: 0.2 iocclus extra hard yellow Rh: 0.7; Ta: 0. iocclus N 1997 extra hard yellow Ir: 0.1; Rh: 0.2; Nb: 0.4; Fe: 0.2 iobond III 1987 extra hard bright yellow Ir: 0. iobond SG IV 1996 extra hard yellow Rh: 1.0; Ta: 0. Degudent U 1967 extra hard white 4, Ir: 0.1; Re: 0.2; Fe: 0.2 Degudent H 1977 extra hard bright yellow 4, 6, Ta: 0.1 Degudent U extra hard white 4, Ir: 0.1; Re: 0.2; Ta: 0.2 Degudent Kiss 2004 extra hard bright yellow 4, 6, Ir: 0.1; Ta: 0.2 Degudent G 1974 extra hard yellow Rh: 1.6; Ta: 0.5 Degutan 1996 extra hard white 4, Ir: 0.2 Degudent Eco 2010 extra hard white 4, 6, Ta: 0.2; Ru: 0.1 Deva extra hard white Ir: 0.2; Ga: 1.2 Degubond extra hard white Ir: 0.1; Ga: 0.5; Ta: 0.1; Re: 0.2 Degudor 1992 extra hard white Ir: 0.2; Ga: 1.2 Econolloy Pd 2006 extra hard white 4, 5, Ru: 0.2 Degustar F 1991 extra hard white 4, 5, Ru: 0.1 Pors-on extra hard white 4, 5, Ru: 0.2 Degupal G 1990 extra hard white 4, 5, 6, Ru: 0.5; Ga: 6.0; Ge: 0.5 Gold-reduced veneerable with low fusing ceramics Degunorm 1992 extra hard yellow 4, 5, 7 8) Ir: 0.1 Degunorm supra 200 extra hard yellow 4, 5, 7 8) Ir: 0.1 Degunorm pur 200 extra hard yellow 4 8) 10) Ir: 0.1; Ta: 0.1 Degunorm logic 2001 extra hard yellow 4 8) 10) Ir: 0.1; Rh: 0.6; Ta: 0.4 Degudent LTG 1995 extra hard yellow 4, 5, 7 8) Ir: 0.1 Degunorm eco 2001 extra hard bright yellow 4 8) Ir: 0.1 Stabilor LTG 1999 extra hard bright yellow 4 8) Ir: 0.1 Econolloy 2004 extra hard bright yellow 4 8) Ir: 0.1 g / Pd based Econolloy g 2006 extra hard white 4 8) Ir: 0.1 Degulight 1999 extra hard white 4 8) Ir: 0.1 u- / Pt groupmetals Palladiumbased Goldreduced g Pd rown and bridge alloys M 1955 extra hard yellow 4, 6, Ir: 0.1 MO 1962 extra hard yellow 4, 6, Ir: 0.1 io M 2006 extra hard yellow Ir: 0.1 iocclus inlay 1996 hard yellow Ir: 0.1 NF IV 1977 extra hard bright yellow 4, 5, Ir: hard yellow Ir: 0.1 iolor SG 1998 extra hard yellow 4, 6, Ir: 0.1 Stabilor NF IV 1977 extra hard bright yellow 4, Ir: 0.1 Stabilor IV plus 199 extra hard yellow 4, Ir: 0.1 Stabilor G 1974 extra hard yellow 4, Ir: 0.1 Palliag M 191 extra hard white Ir: 0.1 Precious-metal wires i soft yellow Ir: 0.1 extra hard yellow Ir: 0.1 Permador extra hard white Ir: 0.1 obalt-chromium alloys iosil l 1996 spring hard white 6 o: 62.5 r: 0.5 Mo: 5.0 Si: 1.0 Mn: 0.4 : 0. N: 0. iosil f 1985 spring hard white 6 o: 64.8 r: 28.5 Mo: 5. Si: 0.5 Mn: 0.5 : 0.4

6 lloy asting Parameters Heat-soaking Oxidation Porcelains nnealing temperature Melting range Preheating temperature asting temperature With open flame Propane / O 2 With resistenceheated melting systems 9) With HF- and arccasting devices T ( ) / t (min) V = Vacuum = tmosphere / 15 min iocclus Kiss s 10 s 60 s 5 s 10 s 900 / 5 / 15) iocclus HT s 10 s 60 s 5 s 10 s 900 / 5 / 500 iocclus s 10 s 60 s 5 s 10 s 90 / 5 / 600 iocclus N s 10 s 60 s 5 s 10 s 900 / 5 / 450 iobond III s 10 s 60 s 5 s 10 s 90 / 5 / 500 iobond SG IV s 10 s 60 s 5 s 10 s 90 / 5 / 600 Degudent U s 10 s 180 s 5 s 10 s 90 / 5 / 600 Degudent H s 10 s 120 s 5 s 10 s 90 / 5 / 500 Degudent U s 10 s 180 s 5 s 10 s 90 / 5 / 600 Degudent Kiss s 10 s 120 s 5 s 10 s 90 / 5 / 600 Degudent G s 10 s 60 s 5 s 10 s 90 / 5 / 600 Degutan s 10 s 120 s 5 s 10 s 90 / 5 / 600 Degudent Eco s 10 s 180 s 5 s 10 s 90 / 5 / 700 Deva s 10 s 180 s 5 s 10 s 980 / 10 / 600 Degubond s 10 s 180 s 5 s 10 s 980 / 10 / 700 Degudor s 10 s 180 s 5 s 10 s 980 / 10 / 600 Econolloy Pd s 10 s 180 s 5 s 10 s 980 / 10 / 700 Degustar F s 10 s 0 s 5 s 10 s 980 / 10 / 600 Pors-on s 10 s 180 s 5 s 10 s 980 / 10 / 700 Degupal G s 10 s 180 s 5 s 10 s 980 / 10 / 15) Degunorm s 10 s 0 s 5 s 10 s 780 / 5 / V 450 Degunorm supra s 10 s 60 s 5 s 10 s 780 / 5 / V 550 Degunorm pur s 10 s 0 s 5 s 10 s 780 / 5 / V 550 Degunorm logic s 10 s 0 s 5 s 10 s 780 / 5 / V 15) Degudent LTG s 10 s 0 s 5 s 10 s 780 / 5 / V 15) Degunorm eco s 10 s 0 s 5 s 10 s 780 / 5 / V 550 Stabilor LTG s 10 s 0 s 5 s 10 s 780 / 5 / V 450 Econolloy graphite crucible 0 s 5 s 10 s HF 1400 ceramic crucible 5 s 10 s 120 s 5 s 10 s 14) 550 Econolloy g s 10 s 120 s 5 s 10 s 800 / 5 / V 550 Degulight s 10 s 120 s 5 s 10 s 800 / 5 / V 550 M s 10 s 0 s 5 s 10 s 400 MO s 10 s 0 s 5 s 10 s 400 io M s 10 s 0 s 5 s 10 s 15) iocclus inlay s 10 s 0 s 5 s 10 s 15) NF IV s 10 s 0 s 5 s 10 s s 10 s 0 s 5 s 10 s 450 iolor SG s 10 s 0 s 5 s 10 s 15) Stabilor NF IV s 10 s 0 s 5 s 10 s 500 Stabilor IV plus s 10 s 0 s 5 s 10 s 15) Stabilor G s 10 s 0 s 5 s 10 s 500 Palliag M s 10 s 0 s 5 s 10 s 400 i Permador iosil l s 10 s HF s 5 s rc 2 s 7 s iosil f s 10 s 2 s 7 s

7 lloy Specifications verage linear TE µm / m K Vickers hardness HV % yield strength 11) N / mm² Tensile strength 11) N / mm² Elongation 11) in % Density ( ) ( ) w h c / f c / f h c / f h c / f h g / cm³ iocclus Kiss iocclus HT iocclus iocclus N iobond III iobond SG IV Degudent U Degudent H Degudent U Degudent Kiss Degudent G Degutan Degudent Eco Deva Degubond Degudor Econolloy Pd Degustar F Pors-on Degupal G Indications 2 Single-surface fillings; multi-surface fillings; onlays, partial crowns and crowns Multi-surface fillings; crowns, bridges of smaller span width (if bridge cross-section is sufficient) 4 Multi-surface fillings; crowns; milled units; bridges of any span width 5 Model-cast framework dentures (larger connector) 6 Model-cast dentures 7 Superstructures Degunorm Degunorm supra Degunorm pur Degunorm logic Degudent LTG Degunorm eco Stabilor LTG Econolloy w = Econolloy g Degulight M MO io M iocclus inlay w = w = 70 4 w = NF IV iolor SG Stabilor NF IV Stabilor IV plus Stabilor G Palliag M i Permador Processing notes 8) For direct casting of attachment or implant components, these must be well encased (about 0.5 mm), so that the coefficient of thermal expansion does not cause cracks in the dental porcelain. 9) Shorten the heat-soaking period by 15 s for the Prestomat compact. 10) Up to 8 units. 11) Measurement of samples in accordance with ISO 1562 or ISO 969 or ISO ) fter prerinsing with Degudent Solder N1W or for soldering on directly with Oxynon soldering flux. 1) For soldering after porcelain firing in the combination Stabilor G, GL / silver-free u-pd or Pd-based alloys for ceramics. 14) No need to oxidise, if necessary 800 / 5 /. 15) The maximum hardness is achieved by cooling in the casting mould or by porcelain firing. Only fusing in ceramic crucible. c Hardness that can be achieved by slow cooling in the casting mould (for crown and bridge alloys). f Hardness that can be achieved after porcelain firing (for ceramic alloys). w Soft h Hardened iosil l HV10: fter casting iosil f HV10: Porcelains Duceram Kiss, Duceram Plus Duceragold Kiss, Duceragold love Duceram love

8 onnection technology lloy Solders (working temperatures) Solders after porcelain firing Weldability by laser For alloys for ceramics: Solders before porcelain firing With same type of material Gold-reduced veneerable with high fusing ceramics iocclus Kiss iocclus HT Degudent-Solder G1 (100 ) Solder DG 750 (750 ) iocclus 4 iocclus N iobond III Degudent-Solder N1 (1060 ) / N1W (1070 ) Unilot 2 (760 ) / Solder 2 (745 ) iobond SG IV Degudent-Solder G1 (100 ) Solder DG 750 (750 ) Degudent U Degudent-Solder U1 / U1W (1120 ) / N1 (1060 ) / N1W (1070 ) Degudent H Degudent-Solder N1 (1060 ) / N1W (1070 ) Unilot 2 (760 ) / -Solder 2 (745 ) Degudent U 94 Degudent-Solder U1 / U1W (1120 ) / N1 (1060 ) / N1W (1070 ) Degudent Kiss Degudent-Solder N1 (1060 ) / U1W (1120 ) Solder DG 750 (750 ) Degudent G Degudent-Solder G1 (100 ) Degutan Degutan-Solder 1 (1120 ) Degutan-Solder 2 (800 ) Degudent Eco Degudent-Solder U1W (1120 ) / N1 (1060 ) / N1W (1070 ) -Solder 2 (745 ) / Stabilor-Solder 710 (710 ) Deva 4 Degudent-Solder U1 / U1W (1120 ) / N1 (1060 ) / -Solder 2 (745 ) / Stabilor-Solder 710 (710 ) / Degubond 4 N1W (1070 ) Unilot 2 (760 ) Degudor Econolloy Pd Degudent-Solder U1 / U1W (1120 ) / N1 (1060 ) / N1W (1070 ) Degustar F Degudent-Solder N1 (1060 ) / N1W (1070 ) / G1 (100 ) Pors-on 4 Degudent-Solder U1 / U1W (1120 ) / N1 (1060 ) / N1W (1070 ) -Solder 2 (745 ) / Stabilor-Solder 710 (710 ) 1) Degupal G Degudent-Solder N1 (1060 ) / N1W (1070 ) / G1 (100 ) Gold-reduced veneerable with low fusing ceramics Degunorm Degunorm-Solder 880 (880 ) Degunorm-Solder 700 (700 ) Degunorm supra iocclus-solder G 710 (710 ) / Degunorm-Solder 700 (700 ) iocclus-solder G 870 (870 ) / Degunorm pur Degunorm-Solder 880 (880 ) / 90 (90 ) iocclus-solder G 710 (710 ) Degunorm logic Degudent LTG Degunorm-Solder 880 (880 ) / 90 (90 ) Degunorm-Solder 700 (700 ) Degunorm eco iocclus-solder G 870 (870 ) / Degunorm-Solder 880 (880 ) / 90 (90 ) Stabilor LTG iocclus-solder G 870 (870 ) / Degunorm-Solder 90 (90 ) iocclus-solder G 710 (710 ) Econolloy iocclus-solder G 870 (870 ) g / Pd based Econolloy g Degulight Degunorm-Solder 880 (880 ) / 90 (90 ) Degunorm-Solder 700 (700 ) High-Gold Palladiumbased Goldreduced g Pd rown and bridge alloys M Unilot 1 (820 ) / 2 (760 ) / -Solder 0 (840 ) / 1 (800 ) / 2 (745 ) / Degunorm-Solder 700 (700 ) MO io M iolor Solder G 820 (820 ) iocclus inlay Solder DG 750 (750 ) NF IV Unilot 1 (820 ) / 2 (760 ) / -Solder 0 (840 ) / 1 (800 ) / 2 (745 ) / Degunorm-Solder 700 (700 ) iolor SG iolor-solder G 820 (820 ) Stabilor NF IV Unilot 1 (820 ) / 2 (760 ) Stabilor IV plus -Solder 2 (745 ) / Degunorm-Solder 700 (700 ) Stabilor G Unilot 2 (760 ) / Stabilor-Solder 710 (710 ) Palliag M Unilot 1 (820 ) / 2 (760 ) Precious-metal wires i -Solder 0 (840 ) / 1 (800 ) / 2 (745 ) Permador obalt-chromium alloys iosil l Degudent-Solder N1W (1070 ) / -Solder 0 (840 ) 12) / 1 (800 ) 12) / 2 (745 ) 12) iosil f

Equipment Welding machine

Equipment Welding machine Equipment Welding machine quasar Speed and ease of use are the unique characteristics of Zhermack s Quasar welding equipment. Quasar and Quasar Plus use the thermal energy produced by an infrared electromagnetic

More information

STARRBIDE Crucibles. Product Information MOLTEN METAL SYSTEMS DESCRIPTION

STARRBIDE Crucibles. Product Information MOLTEN METAL SYSTEMS DESCRIPTION Product Information STARRBIDE Crucibles DESCRIPTION STARRBIDE s a high quality tar-bonded silicon carbide crucible. STARRBIDE is an established product with a proven trackrecord through extensive worldwide

More information

CREATION PRESS-CERAMICS ZIRCONIUM OXIDE

CREATION PRESS-CERAMICS ZIRCONIUM OXIDE CREATION WILLI GELLER INTERNATIONAL SIMPLY BRILLIANT INSTRUCTIONS FOR USE CREATION PRESS-CERAMICS ZIRCONIUM OXIDE Hubert Schenk CP ZI 1 CONTENT Introduction 3 Frame 4 Frame Shade 5 Cut Back Technique 6-11

More information

STARBIDE Crucibles DESCRIPTION. STARRBIDE s a high quality tar-bonded silicon carbide crucible.

STARBIDE Crucibles DESCRIPTION. STARRBIDE s a high quality tar-bonded silicon carbide crucible. STARBIDE Crucibles DESCRIPTION STARRBIDE s a high quality tar-bonded silicon carbide crucible. STARRBIDE is an established product with a proven trackrecord through extensive worldwide sales. It is designed

More information

djangoproject.com skillsapp.com for invite)

djangoproject.com skillsapp.com for invite) DATA DESIGN MEANING djangoproject.com skillsapp.com (tweet @skillsapp for invite) VISUALIZATION SRSLY, GUISE DATA? PROFIT MEANING! acquire parse filter mine represent refine interact acquire parse filter

More information

Ceramics for pyrometers, furnace construction & laboratory ware. Schunk Ingenieurkeramik

Ceramics for pyrometers, furnace construction & laboratory ware. Schunk Ingenieurkeramik Ceramics for pyrometers, furnace construction & laboratory ware Schunk Ingenieurkeramik Advantages High dimensional tolerance Very good thermal shock resistance Chemical corrosion resistance High heat

More information

Radionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x

Radionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x Ac-225 Actinium(89) 0.6 16.2 1x10-2 0.270 2.1x10 3 5.8x10 4 Ac-227 40 1080 2x10-5 5.41x10-4 2.7 7.2x10 1 Ac-228 0.6 16.2 0.4 10.8 8.4x10 4 2.2x10 6 Ag-105 Silver(47) 2 54.1 2 54.1 1.1x10 3 3.0x10 4 Ag-108m

More information

Copper & Copper Nickel. Pipes Fittings Flanges.

Copper & Copper Nickel. Pipes Fittings Flanges. Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS

More information

BORNEBUSCH. Non-ferrous metals. Stock list and material list for cast bronzes and other non-ferrous metals

BORNEBUSCH. Non-ferrous metals. Stock list and material list for cast bronzes and other non-ferrous metals Non-ferrous metals Stock list and material list for cast bronzes and other non-ferrous metals 30 Non-ferrous metals BORNEBUSCH Table of contents 1. Red bronze (CuSn7ZnPb) 32 1.1 Pipes 33 1.2 Round rods

More information

SMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S

SMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased

More information

VITA SUPRINITY Product information

VITA SUPRINITY Product information VITA SUPRINITY Product information VITA shade taking VITA shade communication VITA shade reproduction VITA shade control Date of issue: 06.13 VITA shade, VITA made. VITA SUPRINITY VITA SUPRINITY Polishing

More information

Polyamide 6 for Injection Moulding

Polyamide 6 for Injection Moulding Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled

More information

Blade Fuses - Illuminated Mini Blade

Blade Fuses - Illuminated Mini Blade Photo Fuse Features: The photo fuse is designed for the automobile and electrical industry. It has become the original equipment circuit protection standard for automobiles, trucks and low power system.

More information

10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.

10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products. 10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at

More information

Internal Combustion Engines

Internal Combustion Engines Emissions & Air Pollution Lecture 3 1 Outline In this lecture we will discuss emission control strategies: Fuel modifications Engine technology Exhaust gas aftertreatment We will become particularly familiar

More information

Low friction, low wear: The Fast and Slow Motion Specialist iglidur J

Low friction, low wear: The Fast and Slow Motion Specialist iglidur J Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening

More information

The bonded pipe system Overview

The bonded pipe system Overview 2.0.0.1 Overview Introduction This section contains a description of the preinsulated single s which LOGSTOR offers. Contents Material specifications 2.0.1 District heating s, insulation series 1 2.0.2

More information

iglidur G The General Purpose Bearing: most popular iglidur material worldwide

iglidur G The General Purpose Bearing: most popular iglidur material worldwide Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also

More information

Sealon Adhesive PTFE Gasket Tape. Technical Data Sheet

Sealon Adhesive PTFE Gasket Tape. Technical Data Sheet Page 1 of 6 is a versatile, easy to use sealing tape that lets you make your own gaskets in an instant. It s made from expanded PTFE which makes it very easy to shape and allows it to compress with only

More information

DESFLEX COMPACT FLANGES

DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when

More information

Precautions on the use of Multilayer Ceramic Capacitors

Precautions on the use of Multilayer Ceramic Capacitors on the use of Multilayer Ceramic Capacitors PRECAUTIONS 1. Circuit Design Verification of operating environment, electrical rating and performance 1. A malfunction of equipment in fields such as medical,

More information

Index. Intro. Endless Spaces. Endless Collection. Endless. 2 Nexion s Essence 4 Overview. 6 Nero 10 Grigio 14 Bianco 18 Taupe 22 Beige 26 Avorio

Index. Intro. Endless Spaces. Endless Collection. Endless. 2 Nexion s Essence 4 Overview. 6 Nero 10 Grigio 14 Bianco 18 Taupe 22 Beige 26 Avorio Endless Index Endless Intro 2 Nexion s Essence 4 Overview Endless Spaces 6 Nero 10 Grigio 14 Bianco 18 Taupe 22 Beige 26 Avorio Endless Collection 30 The collection 32 Technical info Endless Intro Nexion

More information

iglidur G The General Purpose Bearing

iglidur G The General Purpose Bearing iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover

More information

(TRWL) Wire Wound Chip Ceramic Inductor

(TRWL) Wire Wound Chip Ceramic Inductor Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

More information

NEW. Special plasters

NEW. Special plasters NEW pico-rock selectt Special dental arch stone Discover the new dentale arch stone with fascinating properties. For extremely fine processing - with maximum hardness as a result. Working time: Vacuum

More information

Thermal-cutoff, Fuse and Fuseholder Incorporated into a Simple Compact Device

Thermal-cutoff, Fuse and Fuseholder Incorporated into a Simple Compact Device Thermal-cutoff, Fuse and Fuseholder Incorporated into a Simple Compact Device It is generally known to employ a fuse for overcurrent protection and a thermal fuse or a thermostat for overheat protection

More information

PRESSURE SENSORS First in sensors

PRESSURE SENSORS  First in sensors PRESSURE SENSORS First IN SENSORS 2 First IN SENSORS TRUST THE X! Welcome to Metallux USA, Inc. Metallux USA, Inc. is the sole distributor of products for Metallux AG in Germany. A company that is internationally

More information

All-SiC Module for Mega-Solar Power Conditioner

All-SiC Module for Mega-Solar Power Conditioner All-SiC Module for Mega-Solar Power Conditioner NASHIDA, Norihiro * NAKAMURA, Hideyo * IWAMOTO, Susumu A B S T R A C T An all-sic module for mega-solar power conditioners has been developed. The structure

More information

Overview of Plasticiser Solutions

Overview of Plasticiser Solutions www.europeanplasticisers.eu Overview of Plasticiser Solutions The new horizons of the PVC cables industry 26.10.2017 Lyon Matthias Pfeiffer BASF SE representing European Plasticisers Our mission As the

More information

Polyamide 6 & 66 for Injection Moulding

Polyamide 6 & 66 for Injection Moulding Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes

More information

MATERIAL DATA SHEET* ALPANA d.o.o.

MATERIAL DATA SHEET* ALPANA d.o.o. MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...

More information

EXPORTERS OF ENG MATERIALS & FABRICATIONS

EXPORTERS OF ENG MATERIALS & FABRICATIONS EXPORTERS OF ENG MATERIALS & FABRICATIONS Certificate of Registration This is to certify that the Quality Management System of UK Steel Exports Limited Blackvein Industrial Estate, Cross Keys, Newport,

More information

U < 1000 V I 0 A I > 0 A. Current-insulating SLF rolling bearings. Electrical insulation between housing and shaft prevents this damage.

U < 1000 V I 0 A I > 0 A. Current-insulating SLF rolling bearings. Electrical insulation between housing and shaft prevents this damage. prevent damage by current passage Electrical insulation between housing and shaft prevents this damage. Electric voltage which is internally generated between the motor and the stator, especially in electric

More information

Nature-Cryl Family of Denture Base Materials

Nature-Cryl Family of Denture Base Materials Family of Denture Base Materials Introducing Restoration courtesy of Eugene Royzengurt, DTG. 2 Family of Denture Base Materials The NATURE-CRYL family of denture base materials consists of two High Impact

More information

Cal-Chip Electronics, Incorporated Multilayer Ceramic Chip Capacitors

Cal-Chip Electronics, Incorporated Multilayer Ceramic Chip Capacitors Multilayer Ceramic Chip Capacitors Introduction Multilayer Surface Mount Ceramic Capacitors are constructed by screen printing alternative layers of internal metallic electrodes onto ceramic dielectric

More information

LS Copper Wire Rod. Leading Solution

LS Copper Wire Rod. Leading Solution LS Copper Wire Rod Leading Solution Leading Solution LG Cable, LG Industrial Systems and LG-Nikko Copper, Gaon Cable, E1 and Kukdong City Gas are starting with a new name, Leading Solution, LS. New Dream,

More information

Index Coniwood. Intro. Coniwood Spaces. Coniwood Collection. 2 Nexion s Essence 4 Overview

Index Coniwood. Intro. Coniwood Spaces. Coniwood Collection. 2 Nexion s Essence 4 Overview Coniwood Index Coniwood Intro 2 Nexion s Essence 4 Overview Coniwood Spaces 6 Cedro Sbiancato 10 Pino 14 Abete 18 Larice 22 Larice Ossidato 26 Abete Tinto Coniwood Collection 30 The collection 32 Technical

More information

Vtec M. BOHLKE VENEER CORP. Improving Nature s Perfection

Vtec M. BOHLKE VENEER CORP. Improving Nature s Perfection M. BOHLKE VENEER CORP. Improving Nature s Perfection is an innovative and cost-effective approach to real wood veneer. When you need a consistent color and pattern throughout your entire project, is your

More information

Engineering Your Success with Coast Custom Cables

Engineering Your Success with Coast Custom Cables Get the Market-Specific Custom Cable You Need Medical With the medical market s trends of microminiaturization and higher performance requirements, we continue to develop capabilities to provide smaller

More information

Intro. 2 Nexion s Essence 4 Overview. 6 Cedro Sbiancato 10 Pino 14 Abete 18 Larice 22 Larice Ossidato 26 Abete Tinto

Intro. 2 Nexion s Essence 4 Overview. 6 Cedro Sbiancato 10 Pino 14 Abete 18 Larice 22 Larice Ossidato 26 Abete Tinto Coniwood Index Coniwood Intro 2 Nexion s Essence 4 Overview Coniwood Spaces 6 Cedro Sbiancato 10 Pino 14 Abete 18 Larice 22 Larice Ossidato 26 Abete Tinto Coniwood Collection 30 The collection 32 Technical

More information

H35/40G(V) /7 Call Center. Engine Power Plant Sales Dep t Tel : 86)

H35/40G(V) /7 Call Center. Engine Power Plant Sales Dep t Tel : 86) http://www.soarpower.com http://www.soarpower.com H35/40G(V) Copyright 2014 Hyundai Heavey Industries Engine Power Plant Sales Dep t Tel : 86) 4006-690 588 E-mail : sale@soar.hk 24/7 Call Center 9 +8-4008111308

More information

Simply Beautiful. Simply Beautiful. Zirconia Layering Ceramic Instructions for Use. Exclusively From Jensen Dental

Simply Beautiful. Simply Beautiful. Zirconia Layering Ceramic Instructions for Use. Exclusively From Jensen Dental Zirconia Layering Ceramic Instructions for Use Exclusively From Jensen Dental Table of Contents Content Page Company Overview 3 Material and Indications 3 Technical Data 4-5 Color Chart 6 Framework Recommendation

More information

Crastin PBT Thermoplastic polyester resins

Crastin PBT Thermoplastic polyester resins Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN

More information

DESIGN OPTIMIZATION AND FINITE ELEMENT ANALYSIS OF PISTON USING PRO-e

DESIGN OPTIMIZATION AND FINITE ELEMENT ANALYSIS OF PISTON USING PRO-e Int. J. Mech. Eng. & Rob. Res. 2014 Rohit Tamrakar et al., 2014 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 2, April 2014 2014 IJMERR. All Rights Reserved DESIGN OPTIMIZATION AND FINITE ELEMENT

More information

Compact. Flat. Productive. Compact Change System CWS

Compact. Flat. Productive. Compact Change System CWS CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application

More information

Sergé 3% WS03A OF 3% FABRIC CODE. Ultra wide range of proprietary woven screen fabrics. Unsurpassed flexibility, applicable in any kind of situation.

Sergé 3% WS03A OF 3% FABRIC CODE. Ultra wide range of proprietary woven screen fabrics. Unsurpassed flexibility, applicable in any kind of situation. WWW.HELIOSREEN.OM Sergé % WS OF % FRI OE Ultra wide range of proprietary woven screen fabrics. Unsurpassed flexibility, applicable in any kind of situation. an be used both exterior and interior. 8 Guide

More information

Diaphragm Valves. LD Series. Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service

Diaphragm Valves. LD Series.   Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service www.swagelok.com Diaphragm Valves LD Series Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service Cast, forged, and bar stock stainless steel body material 1/4

More information

How to Handle a Reed Switch

How to Handle a Reed Switch How to Handle a Reed Switch Reed Switch Application Notes APPLICATION NOTES: How to Handle a Reed Switch Reed switches consist of two or three metal reed contacts (blades) that are hermetically sealed

More information

COMET GAS CONSUMABLES

COMET GAS CONSUMABLES Insta COMET GAS CONSUMABLES CIGWELD.COM.AU CIGWELD introduces the next generation of Comet gas consumables, featuring a gas equipment world first in black nickel plating. This patented innovation from

More information

3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810

3M Connector System 0.050 x 0.100 Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9

More information

AUML Varistor Series. Surface Mount Varistors

AUML Varistor Series. Surface Mount Varistors The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from

More information

CONVENTIONAL TURNOUTS

CONVENTIONAL TURNOUTS RAILWAY CONVENTIONAL Basic description Turnout mounted in the track enables passing of the vehicle in either straight or branch direction. Depending on the design we distinguish the following types of

More information

Thermocouples TE Measuring Insert. rigid Model TC 001 flexible Model TC 002. Electronic Temperature Measurement

Thermocouples TE Measuring Insert. rigid Model TC 001 flexible Model TC 002. Electronic Temperature Measurement TE 65.01 Thermocouples Measuring Insert Electronic Temperature Measurement rigid Model TC 001 flexible Model TC 002 Services intended Exchangeable measuring insert for all industrial and laboratory applications.

More information

Turcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer

Turcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer Turcon Glyd Ring Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 15 Turcon Glyd Ring 16 Turcon Glyd Ring Turcon Glyd Ring Description Successfully used for decades,

More information

KEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.

KEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.

More information

Single Profiles. Standard NbV U Series

Single Profiles. Standard NbV U Series Standard NbV U Series Single Profiles All profiles from 0 NbV thru 8 NbV are from S450 J2 Modified in lengths to 12 meters. Longer lengths are available on request. PTI typically stocks 6 meter lengths

More information

Forest Standard IC. is done well.

Forest Standard IC. is done well. Control Heads Forest Standard IC Equipped with an ultra reliable pneumatic control block, the Standard IC is acclaimed for its simple design and straightforward technology. We use one Clippard anti-retraction

More information

PRESSURE SENSORS CPS 1184 CPS 2184 SPS 1000 Z SPS 3003 LEADING IN SENSORS

PRESSURE SENSORS CPS 1184 CPS 2184 SPS 1000 Z SPS 3003 LEADING IN SENSORS PRESSURE SENSORS CPS 1184 CPS 2184 SPS 1000 Z SPS 3003 LEADING IN SENSORS 2 LEADING IN SENSORS TRUST THE X! Fair partnership and customer-specific solutions. Every single one of our premium products offers

More information

Article on Sheath materials, Thermowells, Fittings, and Terminations

Article on Sheath materials, Thermowells, Fittings, and Terminations Article on Sheath materials, Thermowells, Fittings, and Terminations 1. INTRODUCTION Temperature sensor element for laboratory and industrial use should normally be protected by some form of sheath or

More information

BRIEF ON ELETRICAL MULIPLE UNITS (EMU)

BRIEF ON ELETRICAL MULIPLE UNITS (EMU) BRIEF ON ELETRICAL MULIPLE UNITS (EMU) Electrical multiple units are used by Indian railways to carry mass passengers in metro and inter cities. The unit consists of motor coach and multiple trailer coaches.

More information

FERROXCUBE DATA SHEET. E42/21/15 E cores and accessories. Supersedes data of September Sep 01

FERROXCUBE DATA SHEET. E42/21/15 E cores and accessories. Supersedes data of September Sep 01 FERROXCUBE DATA SHEET Supersedes data of September 24 28 Sep 1 CORE SETS Effective core parameters SYMBOL PARAMETER VALU E UNIT Σ(I/A) core factor (C1).548 mm 1 V e effective volume 173 mm 3 I e effective

More information

DICHTOMATIK Installation housing

DICHTOMATIK Installation housing DICHTOMATIK Installation housing Besides the rotary shaft seal, the shaft is a key machine element in the rotation sealing system and must therefore fulfill a number of technical requirements in order

More information

Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751

Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Data Sheet 906125 Page 1/5 Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Design type PCS/PCF For temperatures from -50 to +150 C (-70 to +250 C) In accordance with DIN

More information

Profile series I-40. System kit Profile series I-40

Profile series I-40. System kit Profile series I-40 Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000

More information

Bunker Summit Greece. Monique Vermeire Athens. 10 May, 2007

Bunker Summit Greece. Monique Vermeire Athens. 10 May, 2007 Bunker Summit Greece Monique Vermeire Athens 10 May, 2007 Chevron 2005 Efficient engine operation in a world of changing fuel oil quality Driving factors influencing today s and future fuel oil quality

More information

Westinghouse SG Tube Sleeve Designs and Installation. Jesse Baron, PE Principal Engineer

Westinghouse SG Tube Sleeve Designs and Installation. Jesse Baron, PE Principal Engineer Westinghouse SG Tube Sleeve Designs and Installation Jesse Baron, PE Principal Engineer 1 Overview What is a Tube Sleeve? Why Use a Sleeve? History of the Westinghouse SG Tube Sleeve Tube Sleeve Design

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE

More information

Geoscience Testing laboratory (Al Ain)

Geoscience Testing laboratory (Al Ain) Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship

More information

THE BEST MOVES IN THE WORLD

THE BEST MOVES IN THE WORLD THE BEST MOVES IN THE WORLD UNDERHUNG & TOP RUNNING CRANES STACKER CRANE SYSTEMS MONORAILS `SPECIALIZED AVIATION MAINTENANCE CRANES SPECIALIZED LAUNDRY & OVERHEAD MATERIALS HANDLING THE RIGHT MOVE TC/American

More information

iglidur J The Fast and Slow Motion Specialist

iglidur J The Fast and Slow Motion Specialist iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and

More information

Low wear on all shafts: The Marathon Runner iglidur W300

Low wear on all shafts: The Marathon Runner iglidur W300 iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable

More information

H35/40G(V) HHI-EMD Korean-English 24/7 Call Center

H35/40G(V) HHI-EMD Korean-English 24/7 Call Center www.hhi.co.kr www.hyundai-engine.com MACHINERY www.hyundai-engine.com ENGINE & H35/40G(V) 1000, Bangeojinsunhwan-doro, Dong-gu, Ulsan, Korea Copyright 2014 Hyundai Heavey Industries Marine Engine & Machinery

More information

CORE. Sliding technology

CORE. Sliding technology CORE Sliding technology CORE linear sliding bearings 40 years of experience in sliding technology. Advantages of CORE bearings: Low friction coefficient. Bi-directional displacements allowed. Maintenance

More information

Cell interconnection without glueing or soldering for crystalline PV-modules

Cell interconnection without glueing or soldering for crystalline PV-modules Cell interconnection without glueing or soldering for crystalline PV-modules Johann Summhammer and Zahra Halavani Solar Cells Group, TU-Vienna, Vienna, Austria. http://www.ati.ac.at/~summweb Motivation:

More information

TVC_Relation.doc date: 20 th December 2005 Prot.:

TVC_Relation.doc date: 20 th December 2005 Prot.: TECNICAL TVC_Relation.doc date: 20 th December 2005 Prot.: - - riferimento Thermo-Vacuum Chamber (TVC) Contenuti Description of the camera, flanges and feedthrough signature prepared by : 20/12/05 ing.

More information

THERMAL ANALYSIS OF DIESEL ENGINE PISTON USING 3-D FINITE ELEMENT METHOD

THERMAL ANALYSIS OF DIESEL ENGINE PISTON USING 3-D FINITE ELEMENT METHOD INTERNATIONAL JOURNAL OF MANUFACTURING TECHNOLOGY AND INDUSTRIAL ENGINEERING (IJMTIE) Vol. 2, No. 2, July-December 2011, pp. 97-102 THERMAL ANALYSIS OF DIESEL ENGINE PISTON USING 3-D FINITE ELEMENT METHOD

More information

High precision ball bearings

High precision ball bearings GMN Paul Müller Industrie GmbH & Co. KG Äussere Bayreuther Str. 230 D-90411 Nuremberg Phone: +49 911-5691-0 Fax: +49 911-5691-221 www.gmn.de High precision ball bearings Ball bearings: Phone: +49 911-56

More information

VITA - VACUMAT 30. Operating Manual

VITA - VACUMAT 30. Operating Manual VITA - VACUMAT 30 Operating Manual Table of Contents 1 Technical Specifications --------------------------------------------------------------------------------------------2 2 Safety advice------------------------------------------------------------------------------------------------------------3

More information

HHD HIGH VOLTAGE FUSES GERMAN DIN STANDARD. The temperature limiting function of the fuse striker pin. Design and construction.

HHD HIGH VOLTAGE FUSES GERMAN DIN STANDARD. The temperature limiting function of the fuse striker pin. Design and construction. HHD HIGH VOLTAGE GERMAN DIN STANDARD FOR AIR & GAS INSULATED SWITCHGEARS OUTDOOR SWITCHGEARS The striker pin system is connected by means of a high resistance parallel conductor. After melting the main

More information

Development of Low-thrust Thruster with World's Highest Performance Contributing to Life Extension of Artificial Satellites

Development of Low-thrust Thruster with World's Highest Performance Contributing to Life Extension of Artificial Satellites Development of Low-thrust Thruster with World's Highest Performance Contributing to Life Extension of Artificial Satellites 40 NOBUHIKO TANAKA *1 DAIJIRO SHIRAIWA *1 TAKAO KANEKO *2 KATSUMI FURUKAWA *3

More information

North American 4485 Tempest SE

North American 4485 Tempest SE Combustion North American 4485 Tempest SE Medium/High Velocity Gas Burner Low NOx gas burner, durable construction and flexible desgin to fit a variety of applications. NPT or BSP air/gas inlets, adjustable

More information

A5 THE FIRST CAD-CAM

A5 THE FIRST CAD-CAM A5 THE FIRST CAD-CAM THE SOLUTION THE FIRST CAD CAM A5 the entry level milling machine by Dental Machine, Movement on XYZ axes with precision ball screw and specifically developed for the dental lab or

More information

Seamless hot rolled tubes and seamless hollow bars

Seamless hot rolled tubes and seamless hollow bars Seamless hot rolled tubes and seamless hollow bars Benteler Distribution Customised steel tube solutions An internationally operating stockholding company of carbon alloy and stainless steel tubes With

More information

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:

More information

Tube & Pipe Division

Tube & Pipe Division Tube & Pipe Division Cu-Ni / Brass / Al-Brass / Copper CONTENTS 01 GREETINGS 02 HSE STATEMENT 03 MANUFACTURING PROCESS 04 COMPANY PROFILE 05 QUALITY 06 ~ 07 PRODUCTS 08 EUROPE STANDARD 09 USA STANDARD

More information

Baseline Yields at SPES with BEST_cyclotron

Baseline Yields at SPES with BEST_cyclotron September 2010 Ref.: F. Gramegna Baseline Yields at SPES with BEST_cyclotron Basic assumptions in calculating baseline yields are provided in bullet form, and explained in subsequent paragraphs. Basic

More information

ARI-FABA -Plus Stop valve with bellows seal

ARI-FABA -Plus Stop valve with bellows seal Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus - Straight through with flanges DIN DVGW-Type approval TA - Luft TÜV-Test-No. 973-10183778

More information

Measurement of DC resistance; measured at current of 3 Amp. DC (fuses with value below with lower currents)

Measurement of DC resistance; measured at current of 3 Amp. DC (fuses with value below with lower currents) World's Largest Fuse Measurements Report 01-2010 The measurements done, were made under the aspect of the influence of slow blow fuses on sonic behaviour of high-end audio gear. Measurement of DC resistance;

More information

.S CAT-HYSCKT

.S CAT-HYSCKT .S CAT-HYSCKT-2016-1 CONTENTS HYTORC SOCKETS HYTORC SOCKET OVERVIEW... 5 NEW HYTORC SOCKET COATING... 7 ½ DRIVE SOCKETS... 8 12PT ½ DRIVE SOCKETS... 11 ¾ DRIVE SOCKETS... 12 12PT ¾ DRIVE SOCKETS... 17

More information

Technical Specification for 12kV and 24kV Current Limiting Fuse- Links for Overhead Applications

Technical Specification for 12kV and 24kV Current Limiting Fuse- Links for Overhead Applications Ergon Energy Corporation Limited Technical Specification for 12kV and 24kV Current Limiting Fuse- Links for Overhead Applications ETS12-01-04 Specification ETS12-01-04 Ver 3 Contents 1. Purpose and Scope...

More information

Kolbenschmidt Pierburg Group

Kolbenschmidt Pierburg Group Kolbenschmidt Pierburg Group KS Aluminum Pistons for Truck Applications Requirements The development of on- and off-highway diesel engines for a wide spectrum of applications is affected by global emission

More information

ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU

ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU WHAT IS ATEVA MEDICAL? Ateva Medical EVA-based resins deliver the reliable performance required for medical applications. Celanese can help companies

More information

TECHNYL A 218 BLACK 21N

TECHNYL A 218 BLACK 21N TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical

More information

Success starts and ends with the details. We've got you covered.

Success starts and ends with the details. We've got you covered. Success starts and ends with the details. We've got you covered. Liquid Dispensers What are you weighting for? Precision equals performance. That s why our liquid dispensers deliver incomparable accuracy

More information

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.) 1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

REDCUBE The Impressive Press-Fit Technology and more

REDCUBE The Impressive Press-Fit Technology and more REDCUBE The Impressive Press-Fit Technology and more High amperage solution Superior mechanical retention these are. Terminals for Power! AGENDA Press-fit technology What is it? Advantages Installation

More information

Metal Processing. SMC Actuators Built to Withstand Tough Environments

Metal Processing. SMC Actuators Built to Withstand Tough Environments Metal Processing SMC products have been used in Metal Processing Applications. With SMC's vast array of pneumatic products, you are sure find the right product to meet your requirements. SMC Actuators

More information

MS52XX SMD Pressure Sensor

MS52XX SMD Pressure Sensor 1, and 12 bar absolute pressure range Uncompensated Piezoresistive silicon micromachined sensor Surface mount 7.6 x 7.6 mm Low-noise, high-sensitivity, high-linearity DESCRIPTION The MS52XX SMD pressure

More information

ACTIVELINE GAUGES. The new ActiveLine PKR and IKR gauges. Compact, durable and maintenance-friendly, minimized stray magnetic field.

ACTIVELINE GAUGES. The new ActiveLine PKR and IKR gauges. Compact, durable and maintenance-friendly, minimized stray magnetic field. ACTIVELINE GAUGES The new ActiveLine PKR and IKR gauges. Compact, durable and maintenance-friendly, minimized stray magnetic field. ACTIVELINE GAUGES The new ActiveLine PKR and IKR gauges. Compact, durable

More information