Fisher 249 Sensor, Level Controller, and Transmitter Dimensions

Transcription

1 Sensor, Controller, and Transmitter Dimensions Product Bulletin isher 249 Sensor, Level Controller, and Transmitter Dimensions This bulletin contains dimensional information for isher displacer type sensors and for controllers and transmitters used with these sensors. Dimensions are subject to change and certified dimensions should be requested for construction projects. Some of the abbreviations used in this document are as follows: NPT = National Pipe Thread, NPS = Nominal Pipe Size, = lat ace lange, R = Raised ace lange, and RTJ = Ring Type Joint lange. lange specification references are SE B6. for CL25 and 250 and SE 6.5 for CL50, 300, 600, 900, 500 and W83 Contents Caged Displacer for External Vessel ounting W : figure and 2; tables, 2, 3, and 4 249B and 249B: figure 3; tables 5, 6, 7, and 8 249C and 249K: figure 4; tables 9, 0, and 249L: figure 5 Cageless Displacer for Internal Vessel ounting Top ounted. 249BP and 249P: figure 6; tables 2 and 3 249CP: figure 7; tables 4 and 5 Side ounted. 249VS: figure 8, 9, 0, and W8334 Cageless Displacer for ounting on Customer Supplied Cage or on Top of Vessel 249W: figure 2 Controllers and Transmitters isher 2500 Controller / Transmitter: figure 3 IELDVUE DLC300 / DLC3020f Digital Level Controller: figure 4

2 Product Bulletin Sensor, Controller, and Transmitter Dimensions 249 igure. isher 249 Top View 244 (9.62) 24 (9.50) 203 (8.00) 297 (.69) TCH LINE () 3 TOP VIEW Table. isher 249 Dimensions,, and W for S and Connections () Displacer Length 83 4 S ND CONNECTIONS CL25 Scrd NPT CL250 R Scrd NPT CL25 CL250 R Scrd is /2 and 2 NPT. langes in NPS 2 only Inches W Table 2. isher 249 Dimensions,, and W for S 2 Connections S 2 CONNECTIONS: /2 NPT, CL250 Displacer Length W Inch Inch Inch Inch Table 4. isher 249 Dimensions,, and W for S 4 Connections S 4 CONNECTIONS: /2 NPT, CL250 Displacer Length W Inch Inch Inch Inch Table 3. isher 249 Dimensions,, and W for S 3 Connections S 3 CONNECTIONS: /2 NPT, CL250 Displacer Length W Inch Inch Inch Inch

3 Sensor, Controller, and Transmitter Dimensions Product Bulletin igure 2. isher 249 Side View (see tables, 2, 3, and 4) 44 (.75) 44 (.75) TCH 302 (.88) TCH W W CL25 /2 4 NPT CL250 3/4 4 NPT S ND TOP ND BOTTO CONNECTIONS (3.50) CL25 /2 4 NPT CL250 3/4 4 NPT S 3 UPPER ND LOWER SIDE CONNECTIONS 44 (.75) 44 (.75) TCH 302 (.88) TCH W W CL25 /2 4 NPT CL250 3/4 4 NPT 89 (3.50) CL25 /2 4 NPT CL250 3/4 4 NPT 89 (3.50) 5 7 S 2 TOP ND LOWER SIDE CONNECTIONS SIDE VIEW S 4 UPPER SIDE ND BOTTO CONNECTIONS 3

4 Product Bulletin Sensor, Controller, and Transmitter Dimensions 249B and 249B (NPS /2 and 2 End Connections) igure 3. isher 249B and 249B (see tables 5, 6, 7, and 8) 244 (9.62) 229 (9.00) /2 /2 NPT 03 (4.06) 203 (8.00) 297 (.69) 42 (6.56) TCH 8 TCH LINE () TOP VIEW W W TCH 03 (4.06) 06 (4.9) 33 3/4 4 NPT S 3 ND 3 UPPER ND LOWER SIDE CONNECTIONS 9 3/4 4 NPT S ND TOP ND BOTTO CONNECTIONS 42 (6.56) /2 /2 NPT TCH 03 (4.06) 03 (4.06) W TCH W 3/4 4 NPT 06 (4.9) 330 3/4 4 NPT S 2 ND 2 TOP ND LOWER SIDE CONNECTIONS 3 S 4 ND 4 UPPER SIDE ND BOTTO CONNECTIONS SIDE VIEW 4

5 Sensor, Controller, and Transmitter Dimensions Product Bulletin 5 Table 5. isher 249B and 249B S,, S 4, and 4 Connections Conn. Style Displacer Length Scrd NPT CL50 CL300 CL600 Scrd NPT CL50 CL300 CL600 R RTJ R RTJ R RTJ R RTJ R RTJ R RTJ S and () S and (Inch) S 4 and 4 () S 4 and 4 (Inch)

6 Product Bulletin Sensor, Controller, and Transmitter Dimensions Table 6. isher 249B and 249B S 2, 2, S 3, and 3 Connections Displacer Length Inches Scrd NPT S 2 ND 2 CONNECTIONS CL50 CL300 CL600 R RTJ R RTJ R RTJ Inches S 3 ND 3 CONNECTIONS Table 7. isher 249B and 249B Dimension (COON DIENSION) Scrd NPT CL50 R CL50 RTJ CL300 R CL300 RTJ CL600 R CL600 RTJ Inch Inch Inch Inch Inch Inch Inch Table 8. isher 249B and 249B Dimensions W and COON DIENSION Displacer Length W Inch Inch Inch

7 Sensor, Controller, and Transmitter Dimensions Product Bulletin 249C and 249K (NPS /2 & 2 End Connections) igure 4. isher 249C and 249K (see tables 9, 0, and ) 20 (8.25) 308 (2.2) 3 /2 /2 NPT (249C) 2 /2 NPT (249K) 57 (2.25) 68 (6.62) 297 (.69) 267 (0.50) 402 (5.8) 23 (8.38) TCH TCH LINE () 249C ONLY TOP VIEW TCH LINE () 249K ONLY 2 94 (3.69) (2.25) TCH S ND TOP ND BOTTO CONNECTIONS (3.69) 57 (2.25) TCH S 2 ND 2 TOP ND LOWER SIDE CONNECTIONS 3 /2 4 NPT S 3 ND 3 UPPER ND LOWER SIDE CONNECTIONS 3 57 (2.25) 23 (8.38) TCH /2 4 NPT /2 /2 NPT (249C) 2 /2 NPT (249K) 342 Note: 389 (5.3) for 249K 2 9 (4.69) for 249K 3 02 (4.00) for 249K S 4 ND 4 UPPER SIDE ND BOTTO CONNECTIONS 7

8 Product Bulletin Sensor, Controller, and Transmitter Dimensions Table 9. isher 249C and 249K Dimensions and, S,, S 4, and 4 Connections Conn. Style S and () S and (In.) S 4 and 4 () S 4 and 4 (In.) Displacer Length Scrd NPT C 249K CL50 CL300 CL600 Scrd CL50 CL300 CL600 NPS NPS 2 /2 lg. R RTJ R RTJ R RTJ NPT R RTJ R RTJ R RTJ lg. lg Table 0. isher 249C and 249K, Dimensions and, S 2, 2, S 3, and 3 Connections Displacer Length Scrd NPT S 2 ND 2 CONNECTIONS S 3 ND 3 CONNECTIONS 249C 249K 249C 249K CL50 CL300 CL600 NPS NPS 2 /2 R RTJ R RTJ R RTJ lg. lg Table. isher 249C and 249K Dimension END CONNECTION SIZE 249C SCREWED 249C CL50 R Inches C CL50 RTJ CL300 R C CL300 RTJ C CL600 R or RTJ K CL500 LNES DN NPS Inch Inch Inch Inch Inch Inch /

9 Sensor, Controller, and Transmitter Dimensions Product Bulletin 249L igure 5. isher 249L 295 (.62) NPS RTJ L. 90 (3.56) (4.00) 230 (9.06) 406 (6.00) TCH TCH LINE () 346 TOP VIEW DISPLCER LENTH 83 4 DIENSION () 2 () 3 () 4 () INCHES L Sensor has CL2500 RTJ flanges NPS 2 RTJ L. TOP ND BOTTO CONNECTIONS 90 (3.56) NPS RTJ L. 37 (5.38) 37 (5.38) TCH 673 (26.50) TCH 673 (26.50) TCH (5.3) NPS 2 RTJ L. 249 (9.8) /2 4 NPT 35 (5.3) 249 (9.8) /2 4 NPT (9.8) 2 TOP ND LOWER SIDE CONNECTIONS 3 UPPER ND LOWER SIDE CONNECTION (NPS 2 RTJ L.) SIDE VIEW 4 UPPER SIDE ND BOTTO CONNECTIONS (NPS 2 RTJ L.) 9

10 Product Bulletin Sensor, Controller, and Transmitter Dimensions 249BP and 249P igure 6. isher 249BP and 249P (see tables 2 and 3) 244 (9.62) 244 (9.62) R R 203 (8.00) 297 (.69) 203 (6.00) 297 (.69) 357 TCH LINE () TOP VIEW 358 TCH LINE () TOP VIEW P /2 /2 NPT 03 (4.06) 44 (.75) /2 /2 NPT THROUH CL600 2 /2 NPT OR CL900 ND CL500 TCH P TCH D D SIDE VIEW 355 SIDE VIEW 249BP 249P Table 2. isher 249BP and 249P Dimension D,, and STNDRD DISPLCER ND STE COBINTIONS D Inch Inch If not specified, dimension will be 305 (2 inches) () Specify. aximum length is 372 (54 inch) 0

11 Sensor, Controller, and Transmitter Dimensions Product Bulletin Table 3. isher 249BP and 249P Dimension P and R DIENSION TYPE NO. LNE SIZE, NPS CL25 CL250 R CL50 CL300 CL600 CL900 CL500 R RTJ R RTJ R RTJ R RTJ R RTJ P 249BP R P 249P R DIENSION TYPE NO. LNE SIZE, NPS Inches P 249BP R P 249P R

12 Product Bulletin Sensor, Controller, and Transmitter Dimensions 249CP (NPS 3 R langed) igure 7. isher 249CP (see tables 4 and 5) 20 (8.25) P 65 (2.56) TCH 68 (6.62) 297 (.69) 35 TCH LINE () TOP VIEW 352 D SIDE VIEW Table 4. isher 249CP Dimensions D,, and STNDRD DISPLCER ND STE COBINTIONS D Inch Inch () If not specified, dimension will be 305 (2 inches). Specify. aximum length is 372 (54 inches) Table 5. isher 249CP Dimension P P CL50 R CL300 R CL600 R Inch Inch Inch

13 Sensor, Controller, and Transmitter Dimensions Product Bulletin 249VS igure 8. isher 249VS with DLC300 / DLC3020f Digital Level Controller Controller Envelope Dimensions; langed Connections 39.7 (5.50) 76.2 (3.00) 76.2 (3.00) 39.7 (5.50) 305 (2.00) (3.53) 305 (2.00) (3.53) 606. (23.86) 606. (23.86) LET HND OUNT RIHT HND OUNT 85. (3.35) 77.7 (3.06) 77.7 (3.06) 85. (3.35) (2.34) (6.75) 66 (2.60) 59.5 (2.34) 39.4 (5.49) /2 4 NPT 2 PLCES 59.5 (2.34) 39.4 (5.49) 59.5 (2.34) 7.5 (6.75) 66 (2.60) (4.00) (4.00) 72.5 (28.05) Notes: Dimension is customer specified 2 Displacer length illustrated is 4 inches E (3.00) 76.2 (3.00) HET INSULTOR EXTENSION 3

14 Product Bulletin Sensor, Controller, and Transmitter Dimensions igure 9. isher 249VS with DLC300 / DLC3020f Digital Level Controller Envelope Dimensions; Butt Weld End 344 (3.53) BUTT WELD END PER CHRT BUTT WELD END PER CHRT 344 (3.53) 78 (3.06) 78 (3.06) 607 (23.88) 59 (2.34) BUTT WELD END BWE SCHED 40 CL600 BWE SCHED 80 CL900 BWE SCHED 60 CL500 BWE SCHED XXS CL (2.34) 607 (23.88) 39 (5.49) 39 (5.49) LET HND OUNT RIHT HND OUNT 403 (5.87) 483 (9.02) DLC300 / DLC3020f /2 4 NPT OUTLET CONN (2 PLCES) DLC300 / DLC3020f /2 4 NPT OUTLET CONN (2 PLCES) 73 (28.07) D OPTIONL HET D INSULTOR Note: EXTENSION Dimension D,, and are customer specified E4567 4

15 Sensor, Controller, and Transmitter Dimensions Product Bulletin igure 0. isher 249VS with 2500 Transmitter Envelope Dimensions; langed Connections 85. (3.35) 7.5 (6.75) 7.5 (6.75) 85. (3.35) 39.7 (5.50) 76.2 (3.00) 76.2 (3.00) 39.7 (5.50) 305 (2.00) 305 (2.00) 52.5 (20.53) (3.53) (3.53) 52.5 (20.53) (8.40) (8.06) LET HND OUNT RIHT HND OUNT 77.7 (3.06) 77.7 (3.06) 23.9 (9.3) 23.9 (9.3) (9.4) (9.4) (4.00) (4.00) Notes: Dimension is customer specified 2 Displacer length illustrated is 4 inches E33808 (3.00) (3.00) 5

16 Product Bulletin Sensor, Controller, and Transmitter Dimensions igure. isher 249VS with 2500 Transmitter Envelope Dimensions; Butt Weld End BUTT WELD END PER CHRT 344 (3.53) BUTT WELD END PER CHRT 344 (3.53) 78 (3.06) 78 (3.06) 522 (20.54) BUTT WELD END 522 (20.54) BWE SCHED 40 CL ISHER 67 SERIES /4 8 NPT SUPPLY CONN 24 (4.87) 5 (4.53) 2500 TRNSITTER /4 8 NPT OUTLET CONN BWE SCHED 80 CL900 BWE SCHED 60 CL500 BWE SCHED XXS CL SERIES /4 8 NPT SUPPLY CONN 24 (4.87) 5 (4.53) 2500 TRNSITTER /4 8 NPT OUTLET CONN LET HND OUNT 467 (8.4) RIHT HND OUNT 459 (8.06) 728 (24.72) D D Notes: OPTIONL HET Dimension D,, and are customer specified INSULTOR EXTENSION E4566 6

17 Sensor, Controller, and Transmitter Dimensions Product Bulletin 249W igure 2. isher 249W Dimensions for ounting on Customer Supplied Cage LET HND OUNT RIHT HND OUNT 30 (.84) 30 (.84) SIZE INCHES 203 (8.00) NPS 3 NPS CL50, CL300, ND CL (8.00) 73 (2.87) 73 (2.87) D D Note: Dimensions D,, and are customer defined E0960 7

18 Product Bulletin Sensor, Controller, and Transmitter Dimensions Controllers and Transmitters igure 3. Controller and Transmitter Dimensions; isher 2500 Controller / Transmitter TCH LINE () TCH LINE () 9 (4.69) 26 (8.50) 238 (9.38) TOP VIEW 09 (4.3) WITH HET INSULTOR /4 4 NPT SUPPLY CONNECTION /4 4 NPT OUTPUT 2 (9.2) 59 (2.3) TCH VENT B 373 BCK VIEW RONT VIEW 2500 CONTROLLER / TRNSITTER 406 (6.00) 59 (2.3) TCH LINE B /4 4 NPT SUPPLY TCH LINE () 26 (8.50) TCH LINE () 238 (9.38) 9 (4.69) 09 (4.3) BCK VIEW /2 4 NPT SUPPLY REOTE SET /4 4 NPT REOTE LEVEL INDICTOR WITH HET INSULTOR TOP VIEW RONT VIEW R5748 B B CONTROLLER / TRNSITTER WITH 2506 OR 256 RECEIVER CONTROLLER 8

19 Sensor, Controller, and Transmitter Dimensions Product Bulletin igure 4. Controller and Transmitter Dimensions; IELDVUE DLC300 / DLC3020f Digital Level Controller 02. (4.02) 73.7 (2.90) 59 (2.34) 39 (5.49) 25.7 (4.95) 59 (2.34) 02.6 (4.04) DETILED RONT VIEW /2 4 NPT CONDUIT CONN 66 (26) /2 4 NPT 2 PLCES END VIEW O INSTRUENT WITH HET INSULTOR WITHOUT HET INSULTOR 308 (2.3) (7.97) HET INSULTOR EXTENSION URNISH ONLY WHEN SPECIIED 9

20 Product Bulletin Sensor, Controller, and Transmitter Dimensions Neither Emerson, Emerson utomation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. isher and IELDVUE are marks owned by one of the companies in the Emerson utomation Solutions business unit of Emerson Electric Co. Emerson utomation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. ll other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. ll sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Emerson Process anagement arshalltown, Iowa 5058 US Sorocaba, 8087 Brazil Cernay, rance Dubai, United rab Emirates Singapore 2846 Singapore , 207 isher Controls International LLC. ll rights reserved.