Split System Heat Pump
|
|
|
- Hannah Sullivan
- 5 years ago
- Views:
Transcription
1 14 Split System Heat Pump seer 4HP14L-7 Features and Benefits R410A High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer capacity Top discharge directs hot air and sound away from living area and shrubbery All units run tested Louvered panel coil protection Easy access to electrical panels, pre-wired for easy hook-up Bi-directional liquid line filter drier factory installed Form No. R4HP14L (07/2012) Discharge muffler for quiet operation Reliable, solid state defrost control Defrost control is Quiet Shift capable Low pressure switch factory installed for loss of charge protection Integrated control with LED diagnostics Short cycle protection factory installed All units ETL approved and AHRI Certified Charged for 15 feet of interconnecting tubing WARRANTY Proper sizing and installation of equipment is critical to achieve optimal performance. Split system air conditioners and heat pumps must be matched with appropriate coil components to meet ENERGY STAR criteria. Visit for details. 10 year limited warranty on compressor, 10 year limited warranty on all parts, extended warranty available* *Warranty provides for a total of 10 years of limited warranty coverage (Standard 5-year limited parts warranty plus an additional 5-year limited extended parts warranty). Warranty must be registered online within 60 days of installation to qualify for 10-year coverage. Unregistered equipment defaults to 5-year coverage. Lifetime limited heat exchanger warranty applies to registered equipment only (Standard 20 years with no online registration). See full warranty at for terms, conditions and exclusions.
2 Model Number Guide 4 HP 14 L 24 P - 7 A 4 = R410a Minor Revision Code HP = Heat Pump Major Revision Code SEER Nominal Electric p V/60Hz/1Ph L = Louvered Nominal 24-24,000 Physical and Electrical Data Model Volts/Hz/Phase Voltage Range Min. Circuit Amp. Max. Overcurrent (amps) Compressor Load (amps) Locked Rotor (amps) Fan Motor Load (amps) HP Nom. RPM Charge (oz.) Shipping Weight (lbs.) Wire Guard 4HP14L18P /60/ / NA 165 4HP14L24P /60/ / NA 177 4HP14L30P /60/ / NA 178 4HP14L36P /60/ / NA 202 4HP14L42P /60/ / NA 272 4HP14L48P /60/ / NA 273 4HP14L60P /60/ / NA 297 Weights listed are unit weights with packaging + Factory charged for 15 feet of line set. Adjust per installation instructions. Unit Dimensions & Sound Ratings Louver Model A (in.) Dimensions B (in.) C (in.) Sound Ratings (dba) 4HP14L18P HP14L24P HP14L30P HP14L36P HP14L42P HP14L48P HP14L60P Dimensions listed are unit sizes w/o packaging - Page 2 -
3 Cooling Performance with Coils 4HP14L18P-7 Model Model Cooling Heating Coils 3 SEER EER AHRI BTUH BTUH Buth COP Buth COP Line Size E*1P23(A,B) ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24(A,B) ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L24P-7 E*1P23(A,B) ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24(A,B) ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29(A,B) ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29(A,B) ,000 21, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L30P-7 4HP14L48P-7 4HP14L42P-7 4HP14L36P-7 4HP14L60P-7 E*1P30(A,B,C) ,000 20, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36(A,B,C) ,000 21, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36(B,C) ,400 25, , , /8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P43(B,C) ,400 25, , , /8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C ,000 30, , , /8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D ,000 30, , , /8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C ,000 34, , , /8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D ,000 34, , , /8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62C ,000 42, , , /8 3/8 7/8 3/8 1 1/8 3/8 NA H403 E*1P62D ,000 42, , , /8 3/8 7/8 3/8 1 1/8 3/8 NA H403 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 3 -
4 Cooling Performance with Air Handlers and Furnaces 1-1/2 Ton Model Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size BCS2M18C****P ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 BCS2M24V****P ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 BCS3M18C****P ,800 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23A+H401 80G2UH070AV12* ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23A+H401 80G1DF045AE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23A+H401 80G1UH045AE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 80G2UH090BV16* ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 EFV08BC ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 80G1UH070BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G1DF045BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G2DF070BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G2DF045BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 80G1DF070BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G2UH070BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L18P-7 E*1P23B+H401 95G1UH070BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G2UH045BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G1UH045BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24A+H401 80G2UH070AV12* ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24A+H401 80G1DF045AE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24A+H401 80G1UH045AE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 80G2UH090BV16* ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 EFV08BC ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G1DF045BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2DF070BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 80G1UH070BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G1UH070BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 80G1DF070BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2UH045BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G1UH045BE ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2DF045BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2UH070BV ,000 13, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 4 -
5 Model Cooling Performance with Air Handlers and Furnaces 2 Ton Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size BCS2M24C****P ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 BCS2M24V****P ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 BCS3M24C****P ,400 17, , , /4 3/8 7/8 3/8 3/4 3/8 NA H401 E*1P23A+H401 80G2UH070AV12* ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23A+H401 80G1UH045AE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23A+H401 80G1DF045AE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 EFV08BC ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 80G2UH090BV16* ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G1UH045BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G1UH070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 80G1DF070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G2UH070BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G2UH045BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G1DF045BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L24P-7 E*1P23B+H401 95G2DF070BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 80G1UH070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P23B+H401 95G2DF045BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24A+H401 80G2UH070AV12* ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24A+H401 80G1UH045AE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24A+H401 80G1DF045AE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 80G2UH090BV16* ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 EFV08BC ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 80G1DF070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2UH070BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 80G1UH070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2DF045BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G1UH070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2UH045BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G1UH045BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G2DF070BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P24B+H401 95G1DF045BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 5 -
6 Model Cooling Performance with Air Handlers and Furnaces 2 Ton, 2-1/2 Ton Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size E*1P29A+H401 80G2UH070AV12* ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29A+H401 80G1DF045AE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29A+H401 80G1UH045AE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 80G2UH090BV16* ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 EFV08BC ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L24P-7 E*1P29B+H401 95G2DF045BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G2DF070BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G1DF045BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 80G1UH070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G1UH070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 80G1DF070BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G2UH070BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G1UH045BE ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G2UH045BV ,400 17, , , /4 3/8 3/4 3/8 3/4 3/8 NA H401 BCS2M30C****P ,000 21, , , ,050 3/4 3/8 7/8 3/8 3/4 3/8 NA H401 BCS2M36V****P ,000 21, , , ,050 3/4 3/8 7/8 3/8 3/4 3/8 NA H401 BCS3M30C****P ,600 21, , , ,050 3/4 3/8 7/8 3/8 3/4 3/8 NA H401 E*1P29A+H401 80G2UH070AV12* ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29A+H401 80G1UH045AE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29A+H401 80G1DF045AE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L30P-7 E*1P29B+H401 80G2UH090BV16* ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 EFV12BC ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G2DF070BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G2UH045BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 80G1UH070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G2DF045BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G2UH070BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 80G1UH090BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G1UH070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G1UH045BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 80G1DF090BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 6 -
7 Model Cooling Performance with Air Handlers and Furnaces 2-1/2 Ton Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size E*1P29B+H401 95G1DF070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 80G1DF070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P29B+H401 95G1DF045BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30A+H401 80G2UH070AV12* ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30A+H401 80G1UH045AE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30A+H401 80G1DF045AE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 80G2UH090BV16* ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 EFV12BC ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 80G1UH090BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G2UH070BV ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G1DF045BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 80G1DF070BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G2DF045BV ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G1UH070BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L30P-7 E*1P30B+H401 80G1UH070BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G2UH045BV ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G1UH045BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 80G1DF090BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G2DF070BV ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30B+H401 95G1DF070BE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30C+H401 EFV16CC ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30C+H401 95G1DF090CE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30C+H401 95G2UH090CV ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30C+H401 95G2DF110CV ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30C+H401 95G2DF090CV ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P30C+H401 95G1UH090CE ,000 20, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36A+H401 80G2UH070AV12* ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36A+H401 80G1DF045AE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 80G2UH090BV16* ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 EFV12BC ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 80G1DF090BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 7 -
8 Model Cooling Performance with Air Handlers and Furnaces 2-1/2 Ton, 3 Ton Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size E*1P36B+H401 95G1DF070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 95G2DF070BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 95G2DF045BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 80G1UH070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 80G1DF070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 95G2UH070BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 4HP14L30P-7 E*1P36B+H401 95G1UH070BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 95G2UH045BV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 95G1UH045BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 80G1UH090BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36B+H401 95G1DF045BE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36C+H401 EFV16CC ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36C+H401 95G1DF090CE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36C+H401 95G1UH090CE ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36C+H401 95G2UH090CV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36C+H401 95G2DF110CV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 E*1P36C+H401 95G2DF090CV ,000 21, , , ,050 3/4 3/8 3/4 3/8 3/4 3/8 NA H401 BCS2M36C****P ,400 25, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 BCS2M36V****P ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 BCS3M36C****P ,000 25, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P36A+H402 80G2UH070AV12* ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36A+H402 80G1DF045AE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 4HP14L36P-7 E*1P36B+H402 80G2UH090BV16* ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 EFV12BC ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 80G1UH070BE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 80G1UH090BE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 95G2UH045BV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 95G2DF070BV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 80G1DF090BE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 95G2DF045BV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 80G1DF070BE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 8 -
9 Model Cooling Performance with Air Handlers and Furnaces 3 Ton Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size E*1P36B+H402 95G2UH070BV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36B+H402 95G1DF045BE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 80G2UH110CV20* ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 EFV16CC ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 80G1UH090CE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G2UH090CV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 80G1UH110CE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G2UH090CV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G1UH110CE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G1UH090CE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 80G1DF110CE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G2DF110CV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G1DF110CE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G2DF090CV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 4HP14L36P-7 E*1P36C+H402 95G1DF090CE ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P36C+H402 95G2UH110CV ,600 26, , , ,250 7/8 3/8 3/4 3/8 7/8 3/8 NA H402 E*1P43B+H402 80G2UH090BV16* ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 EFV12BC ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 95G2DF045BV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 95G2DF070BV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 80G1UH070BE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 80G1DF090BE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 95G1DF045BE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 80G1DF070BE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 95G2UH070BV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 80G1UH090BE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43B+H402 95G2UH045BV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 80G2UH110CV20* ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 EFV16CC ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 80G1UH090CE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 80G1DF110CE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 9 -
10 Model Cooling Performance with Air Handlers and Furnaces 3 Ton, 3-1/2 Ton Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size E*1P43C+H402 95G1DF110CE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 95G1UH090CE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 95G2UH090CV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 95G2DF110CV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 95G1DF090CE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 4HP14L36P-7 E*1P43C+H402 95G2UH110CV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 95G2DF090CV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 80G1UH110CE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 95G2UH090CV ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P43C+H402 95G1UH110CE ,600 26, , , ,250 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 BCS2M42C****P ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 BCS2M42V****P ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 BCS3M42C****P ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 80G2UH110CV20* ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 EFV16CC ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 80G1DF110CE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G2UH090CV ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 80G1UH090CE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G2UH110CV ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 4HP14L42P-7 E*1P49C+H402 95G1UH110CE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G1UH090CE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G2DF110CV ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G1DF110CE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G2DF090CV ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 80G1UH110CE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 EFV20DC ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 95G2UH135DV ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 95G1UH135DE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 80G1UH135DE ,000 30, , , ,400 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 10 -
11 Model Cooling Performance with Air Handlers and Furnaces 4 Ton, 5 Ton Model Cooling Heating Coil or Air Handler 3 Furnace SEER EER ARI COP COP Line Size BCS2M48C****P ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 BCS2M48V****P ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 BCS3M48C****P ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 80G2UH110CV20* ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 EFV16CC ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 4HP14L48P-7 E*1P49C+H402 95G2DF110CV ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G2UH090CV ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 80G1DF110CE ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G2DF090CV ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G1DF110CE ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P49C+H402 95G2UH110CV ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 EFV20DC ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 95G2UH135DV ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 95G1UH135DE ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 E*1P62D+H402 80G1UH135DE ,000 34, , , ,600 7/8 3/8 7/8 3/8 7/8 3/8 NA H402 4HP14L60P-7 BCS2M60C****P ,000 42, , , ,800 7/8 3/8 7/8 3/8 1 1/8 3/8 NA H403 BCS2M60V****P ,000 42, , , ,800 7/8 3/8 7/8 3/8 1 1/8 3/8 NA H403 BCS3M60C****P ,000 41, , , ,900 7/8 3/8 7/8 3/8 1 1/8 3/8 NA H403 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products. - Page 11 -
12 Cooling Performance with Extended Ratings Temp - DB F Model Model Temp DB/WB F S/T kw S/T kw S/T kw S/T kw S/T kw 85/72 21, , , , , HP14L18P-7 BCS3M19 80/67 19, , , , , /63 18, , , , , /57 17, , , , , /72 30, , , , , HP14L24P-7 BCS3M24 80/67 27, , , , , /63 25, , , , , /57 24, , , , , /72 35, , , , , HP14L30P-7 BCS3M30 80/67 33, , , , , /63 31, , , , , /57 29, , , , , /72 39, , , , , HP14L36P-7 BCS3M36 80/67 37, , , , , /63 36, , , , , /57 32, , , , , /72 50, , , , , HP14L42P-7 BCS3M42 80/67 48, , , , , /63 44, , , , , /57 41, , , , , /72 51, , , , , HP14L48P-7 BCS3M48 80/67 49, , , , , /63 47, , , , , /57 43, , , , , /72 72, , , , , HP14L60P-7 BCS3M60 80/67 65, , , , , /63 60, , , , , /57 57, , , , , Extended data shown is actual for models listed and typical for all AHRI matches. - Page 12 -
13 Heating Performance with Extended Ratings Model Model Temp - DB/WB F 00 17/15 35/33 47/43 62/56 kw kw kw kw kw 4HP14L18P-7 BCS3M19 4, , ,800 1., , HP14L24P-7 BCS3M24 5, , , , , HP14L30P-7 BCS3M30 7, , , , , HP14L36P-7 BCS3M36 9, , , , , HP14L42P-7 BCS3M42 12, , , , , HP14L48P-7 BCS3M48 14, , , , , HP14L60P-7 BCS3M60 18, , , , , Extended data shown is actual for models listed and typical for all AHRI matches. - Page 13 -
14 Accessories Description Where Used Kit Number Crankcase Heater Hard Start Kit 18, 24, 30, 36 93M04 42, 48, 60 93M J42 24, 30, 36, 42, 48, 60 88M91 Compressor Low Ambient Kit 18, 24, 30, 36, 42, 48, 60 45F08 Sound Blanket 18, 24, 30, 36, 42, 48, 60 69J03 Short Cycle Protector 18, 24, 30, 36, 42, 48, 60 (Factory Installed) 47J27 Freezestat 3/8 tubing 93G35 5/8 tubing 50A93 Time Delay Relay 18, 24, 30, 36, 42, 48, 60 58M81 Loss of Charge Kit 18, 24, 30, 36, 42, 48, 60 84M23 - Page 14 -
15 - Page 15 -
16 All specifications and illustrations subject to change without notice and without incurring obligations Form No. R4HP14L (07/2012) 2012 Allied Air Enterprises LLC, a Lennox International Inc. Company Printed in the U.S.A. - Page 16 -
Split System Air Conditioning
Features and Benefits 6 Split System Air Conditioning 4AC6LT seer Fm No. D4AC6LT-00 (06/0) COMPRESSOR High-efficiency stage Copeland UltraTech TM scroll compress R40a refrigerant Grommet-mounted compress
4SHP14LE. Product Specifications. 14 SEER Split System Heat Pump COMPONENTS COMPRESSOR DESIGN COIL CABINET ACCESSORIES
Product Specifications 4 SEER Split System Heat Pump Fm No. -00 (04/0) COMPRESSOR High-efficiency scroll compress R40a refrigerant Grommet-mounted compress f quiet operation Protected against high temperature
4SHP18LS. Product Specifications. 18 SEER Split System Enhanced Heat Pump COMPONENTS COMPRESSOR CABINET DESIGN WARRANTY COIL
Product Specifications 18 SEER Split System Enhanced Heat Pump Form No. -100 (02/2013) Communicating Thermostat enabled COMPRESSOR High-efficiency 2 stage Copeland Ultra Tech scroll compressor R410a refrigerant
4SHP13LB PRODUCT SPECIFICATIONS 13 SEER SPLIT SYSTEM HEAT PUMP COIL DESIGN ACCESSORIES. COMPRESSOR Low ambient kit Crank Case Heater Freezestat
4SHP13LB 13 SPLIT SYSTEM HEAT PUMP PRODUCT SPECIFICATIONS FORM NO. 4SHP13LB-100 (11/2016) Reliable, solid-state, time-initiated, temperature-terminated defrost system Service valves positioned for quick
4SHP18LS PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS 18 SEER SPLIT SYSTEM ENHANCED HEAT PUMP FORM NO. -100 (06/2014) COMPONENTS Full metal louvered panels remove for easy coil cleaning and service Bi-directional filter drier for long-lasting
Enhanced Air Conditioning
4SCU16LT Split System Enhanced Air Conditioning COMPRESSOR High-efficiency 2 stage Copeland UltraTech TM scroll compressor R410a refrigerant Grommet-mounted compressor for quiet operation Internally protected
4SHP13LE Product Specifications
4SHPLE Product Specifications S SPLIT SYSTEM HEAT PUMP FORM NO. 4SHPLE-00 (0/04) Service valves positioned for quick installation and easy service Low pressure switch for loss of charge system protection
4SHP13 PRODUCT SPECIFICATIONS
4SHP13 PRODUCT SPECIFICATIONS 3 PHASE SPLIT SYSTEM HEAT PUMP FORM NO. 4SHP13LC-100 (03/2017) Defrost control features built-in diagnostics f easier Defrost control has sht cycle protection to protect compress
Split System Heat Pump 2HP13
Split System Heat Pump 2HP3 Features and Benefits Durable Copeland scroll compressors, with internal pressure relief valves and inherent thermal protection High quality condenser coil with copper tubing
Split System Air Conditioning 2AC13
Split System Air Conditioning 2AC3 Features and Benefits Durable Copeland compressors, with internal pressure relief valves and inherent thermal protection High quality condenser coil with copper tubing
4SHP14LB PRODUCT SPECIFICATIONS 14 SEER SPLIT SYSTEM HEAT PUMP DESIGN COIL ACCESSORIES COMPRESSOR WARRANTY CABINET COMPONENTS
4SHP14LB PRODUCT SPECIFICATIONS 14 S SPLIT SYSTEM HEAT PUMP FORM NO. 4SHP14LB-100 (12/2016) DESIGN Designed for ambients up to 125 F COIL Enhanced aluminum fins and copper tubing for high efficiency and
80% Gas Furnace. Single Stage - High Efficiency (Constant Torque) Motor. Features and Benefits 80G1-E CONFIGURATIONS HEAT EXCHANGER DESIGN BURNERS
80% Gas Furnace Single Stage - High Efficiency (Constant Torque) Motor 80G1-E Features and Benefits Form No. R80G1-E-100 (11/2011) CONFIGURATIONS HEAT EXCHANGER DESIGN Aluminized steel tapered crimped
95% Gas Furnaces. Single Stage - High Efficiency (Constant Torque) Motor. Features and Benefits 95G1-E CONFIGURATIONS HEAT EXCHANGER DESIGN BURNER
95G1-E Features and Benefits CONFIGURATIONS 95% Gas Furnaces Single Stage - High Efficiency (Constant Torque) Motor Upflow / Horizontal Downflow Form No. R95G1-E-100 (01/2012) HEAT EXCHANGER DESIGN Aluminized
95G1E PRODUCT SPECIFICATIONS SINGLE STAGE CONSTANT TORQUE MOTOR VENTING INSTALLATION FEATURES WARRANTY CONFIGURATIONS HEAT EXCHANGER DESIGN BURNER
95G1E PRODUCT SPECIFICATIONS SINGLE STAGE CONSTANT TORQUE MOTOR FORM NO. 95G1E-100 (04/2016) VENTING Designed certified for direct (2-pipe) and non direct (1-pipe) applications Easily vented with PVC pipe
95G1-E. Aluminized steel primary heat exchanger with crimped non-welded construction AL 29-4C Stainless steel secondary heat exchanger
Single Stage - High Efficiency (Constant Torque) Motor 95% Gas Furnaces Features and Benefits CONFIGURATIONS Upflow / Horizontal Downflow 95G1-E Form No. D95G1-E-100 (10/2011) HEAT EXCHANGER DESIGN Aluminized
DSZC16. Split System Heat Pump Up to 16 SEER & 9.5 HSPF. Cooling Capacity: 24,000-60,000 BTU/h Heating Capacity: 24,000-60,000 BTU/h
Cooling Capacity: 24,000-60,000 BTU/h Heating Capacity: 24,000-60,000 BTU/h Split System Heat Pump Up to 16 SEER & 9.5 HSPF Contents Nomenclature... 2 Product Specifications... 3 Expanded Cooling Data...
PRPHP14 PRODUCT SPECIFICATIONS 14 SEER HEAT PUMP PACKAGED UNIT REFRIGERANT SYSTEM CABINET CONSTRUCTION BLOWER CONTROLS INSTALLATION ACCESSORIES
PRODUCT SPECIFICATIONS 4 SEER HEAT PUMP PACKAGED UNIT FORM NO. -00 (03/207) REFRIGERANT SYSTEM Environmentally friendly R40A refrigerant Copper tubing with enhanced fin coils Internal service gauge ports
Gold Split System Heat Pump W2GH3
COMPRESSOR High efficiency Copeland scroll compressor Grommet mounted compressor for quiet operation Internally protected against high temperature motor overload conditions Compressor Sound Jacket R22
96G1E PRODUCT SPECIFICATIONS SINGLE STAGE CONSTANT TORQUE MOTOR VENTING INSTALLATION FEATURES WARRANTY CONFIGURATIONS HEAT EXCHANGER DESIGN BURNER
96G1E PRODUCT SPECIFICATIONS SINGLE STAGE CONSTANT TORQUE MOTOR FORM NO. 96G1E-100 (04/2018) VENTING Designed certified for direct (2-pipe) and non direct (1-pipe) applications Easily vented with PVC pipe
13 SEER Light Commercial 3 Phase
13 SEER Light Commercial 3 Phase Packaged Gas / Electric RGE13 Features and Benefits Form No. AC-RGE13-100 (04/2013) Refrigerant System Environmentally friendly R410A refrigerant Copper tubing with enhanced
PRPDF14 PRODUCT SPECIFICATIONS 14 SEER DUAL FUEL PACKAGED UNIT REFRIGERANT SYSTEM HEAT EXCHANGER CABINET CONSTRUCTION ACCESSORIES WARRANTY BLOWER
PRODUCT SPECIFICATIONS 14 SEER DUAL FUEL PACKAGED UNIT FORM NO. -100 (01/2017) REFRIGERANT SYSTEM Environmentally friendly R410A refrigerant Copper tubing with enhanced fin coils Internal service gauge
RPHP13. Product Specifications. 13 SEER Heat Pump Residential Packaged Unit. Refrigerant System. Cabinet Construction. Blower. Controls.
RPHP13 Product Specifications Refrigerant System Environmentally friendly R410A refrigerant Copper tubing with enhanced fin coils External service gauge ports 13 SEER Heat Pump Residential Packaged Unit
HCH6. Product Specifications
HCH6 Product Specifications HIGH EFFICIENCY 16 SEER TWO- STAGE HEAT PUMP WITH OBSERVERt COMMUNICATING CONTROL SYSTEM 2 THRU 5 TONS SPLIT SYSTEM 208/230 Volt, 1- phase, 60 Hz REFRIGERATION CIRCUIT S Copeland
RCE13. Product Specifications. 13 SEER Electric / Electric Residential Packaged Unit. Refrigerant System. Cabinet Construction. Blower.
RCE13 Product Specifications 13 SEER Electric / Electric Residential Packaged Unit Form No. RCE13-100 (04/2013) Refrigerant System Environmentally friendly R410A refrigerant Copper tubing with enhanced
DZ14SA. Energy-Efficient Split System Heat Pump Up to 15 SEER & 9.0 HSPF. Cooling Capacity: 18,000-60,000 BTU/h Heating Capacity: 18,000-60,000 BTU/h
Cooling Capacity: 18,000-60,000 Heating Capacity: 18,000-60,000 Energy-Efficient Split System Heat Pump Up to 15 SEER & 9.0 HSPF Contents Nomenclature... 2 Product Specifications... 3 Expanded Cooling
RPGE13. Product Specifications. 13 SEER Gas / Electric Residential Packaged Unit. Refrigerant System. Heat Exchanger. Cabinet Construction.
RPGE13 Product Specifications 13 SEER Gas / Electric Residential Packaged Unit Form No. RPGE13-100 (04/2013) Refrigerant System Environmentally friendly R410A refrigerant Copper tubing with enhanced fin
GSZ13. Energy-Efficient Split System Heat Pump 1½ to 5 Tons. Cooling Capacity: 17,400 to 57,000 BTU/h Heating Capacity: 17,000 to 58,000 BTU/h
Energy-Efficient Split System Heat Pump 1½ to 5 Tons Cooling Capacity: 17,400 to 57,000 BTU/h Heating Capacity: 17,000 to 58,000 BTU/h Contents Nomenclature... 2 Product Specifications... 3 Expanded Cooling
PRPAC14 PRODUCT SPECIFICATIONS 14 SEER ELECTRIC/ELECTRIC PACKAGED UNIT REFRIGERANT SYSTEM CABINET CONSTRUCTION BLOWER INSTALLATION WARRANTY
PRODUCT SPECIFICATIONS 14 SEER ELECTRIC/ELECTRIC PACKAGED UNIT FORM NO. -100 (01/2017) REFRIGERANT SYSTEM Environmentally friendly R410A refrigerant Copper tubing with enhanced fin coils Internal service
Packaged Units. Full Line of Packaged Units. Energy efficiency and quality construction for worry-free comfort.
Packaged Units Full Line of Packaged Units Energy efficiency and quality construction for worry-free comfort. Dependable, energy-efficient operation for every home. AirEase packaged units provide the complete
13 SEER. Light Commercial 3 Phase Packaged Heat Pump. RHP13 Features and Benefits. Refrigerant System. Cabinet Construction. Blower.
13 SEER Light Commercial 3 Phase Packaged Heat Pump RHP13 Features and Benefits Form No. AC-RHP13-100 (05/2013) Refrigerant System Environmentally friendly R410A refrigerant Copper tubing with enhanced
NXA6. Product Specifications HIGH EFFICIENCY 16 SEER AIR CONDITIONER
ENVIRONMENTALLY SOUND REFRIGERANT NXA6 Performance Series Product Specifications HIGH EFFICIENCY 16 SEER AIR CONDITIONER ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1½ THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt,
PRAC14 PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS 14 SEER ELECTRIC/ELECTRIC PACKAGED UNIT FORM NO. -100 (01/2017) REFRIGERANT SYSTEM Environmentally friendly R410A refrigerant Copper tubing with enhanced fin coils Internal service
95G2E PRODUCT SPECIFICATIONS 95% TWO-STAGE CONSTANT TORQUE GAS FURNACES CONTROLS VENTING CONFIGURATIONS HEAT EXCHANGER DESIGN INSTALLATION FEATURES
95G2E PRODUCT SPECIFICATIONS 95% TWO-STAGE CONSTANT TORQUE GAS FURNACES FORM NO. 95G2E-100 (04/2016) CONTROLS Two stage gas valve Integrated ignition and fan control Control board retains last ten (10)
DZ13SA. Split-System heat pump. Cooling Capacity: 17,400-55,000 BTU/h Heating Capacity: 15,200-59,000 BTU/h
Split-System heat pump Up to 14 SEER / R-410A Cooling Capacity: 17,400-55,000 BTU/h Heating Capacity: 15,200-59,000 BTU/h Contents Nomenclature... 2 Product Specifications... 3 Expanded Cooling Data...
SSZ14. High-Efficiency. Split System Heat Pump. Cooling Capacity: 18,000 to 57,600 BTU/h. Up to 15 SEER & 8.5 HSPF
High-Efficiency Cooling Capacity: 18,000 to 57,600 BTU/h Heating Capacity: 18,000 to 59,000 BTU/h Split System Heat Pump Up to 15 SEER & 8.5 HSPF Contents Nomenclature... 2 Product Specifications... 3
COMMERCIAL H4A3. Product Specifications EFFICIENT 13 SEER AIR CONDITIONER
ENVIRONMENTALLY SOUND REFRIGERANT COMMERCIAL H4A3 DX 1300 Product Specifications EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1 1/2 THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt,
EFFICIENCY 17 SEER TWO STAGE AIR CONDITIONER WITH OBSERVER
ENVIRONMENTALLY SOUND REFRIGERANT HCA7 QuietComfort DXT+ Product Specifications HIGH EFFICIENCY 17 SEER TWO STAGE AIR CONDITIONER WITH OBSERVER COMMUNICATING CONTROL SYSTEM 2 THRU 5 TONS SPLIT SYSTEM 208/230
H4A3. Product Specifications EFFICIENT 13 SEER AIR CONDITIONER
ENVIRONMENTALLY SOUND REFRIGERANT EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1 1/2 THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1 phase, 60 Hz REFRIGERATION CIRCUIT Copeland
S5BP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS
TECHNICAL SPECIFICATIONS S5BP Series Split System Air Conditioner 71/2 Ton Energy Star rated at 11.7 EER and 11.8 IEER 10 Ton rated at 11.2 EER and 11.5 IEER R-410A Refrigerant The S5BP Series of air conditioners
MGE4 FEATURES REFRIGERANT SYSTEM HEAT EXCHANGER CABINET BLOWER
GAS HEATING / ELECTRIC COOLING PACKAGED UNITS FORM NO. -100 (07/2017) FEATURES Up to 10.0 EER cooling efficiency Less than 2% cabinet air leakage Completely self-contained heating and cooling package No
MCE4 MCE4. Electric Heating / Electric Cooling Packaged Thru-the-Wall Units
MCE4 Electric Heating / Electric Cooling Packaged Thru-the-Wall Units Form No.: MCE4-100 (07/2011) features Up to 10.4 EER cooling efficiency Completely self-contained heating and cooling package No outside
REFRIGERANT SYSTEM R410A Refrigerant High efficiency compressor Copper tubing with enhanced fin coils
MHP4 Electric Heat Pump Packaged Thru-the-Wall Units FEATURES Up to 10.4 EER cooling efficiency Completely self-contained heating and cooling package No outside condensing unit No external refrigerant
GSZ14. High-Efficiency, R-410A 1½ to 5 Tons. up to 14 SEER
High-Efficiency, R-410A 1½ to 5 Tons Cooling Capacity: 18,000 to 57,600 BTU/h Split System Heat Pump up to 14 SEER Heating Capacity: 18,000 to 59,000 BTU/h Standard Features R-410A chlorine-free refrigerant
THE K-SERIES: HIGH-EFFICIENCY PERFORMANCE, COMPLETELY CUSTOMIZED.
THE K-SERIES: HIGH-EFFICIENCY PERFORMANCE, COMPLETELY CUSTOMIZED. The Allied Commercial K-Series line of high-efficiency rooftop units now includes 7.5- to 25-ton sizes, as well as optional BACnet compatibility.
ASZ13 13 SEER / R-410A. Heating Capacity: 18,000-59,000 BTU/h
Cooling Capacity: 18,000-60,000 BTU/h Split System Heat Pump 13 SEER / R-410A Heating Capacity: 18,000-59,000 BTU/h Standard Features R-410A chlorine-free refrigerant High-efficiency scroll compressor
MCE4 FEATURES REFRIGERANT SYSTEM CABINET BLOWER CONTROLS INSTALLATION WARRANTY. Electric Heating / Electric Cooling Packaged Units
Electric Heating / Electric Cooling Packaged Units FORM NO. -100 (06/2017) FEATURES Up to 10.0 EER cooling efficiency Less than 2% cabinet air leakage Completely self-contained heating and cooling package
GQ3RD Series. Single Packaged Heat Pump, Single Phase TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS GQ3RD Series Single Packaged Heat Pump, Single Phase GQ3RD-13 SEER 2 thru 4 Ton Units Cooling: 24,000 to 48,000 Btuh Heating: 23,200 to 48,000 Btuh The GQ3 Series single packaged
GSZ16. High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons
ooling apacity: 18,000 to 60,000 Heating apacity: 18,000 to 60,000 High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons ontents Nomenclature... 2 Product Specifications... 3 Expanded
14.5 SEER VALUE SERIES CONDENSING UNITS
FORM NO. ATZ-215 Supersedes Form No. ATZ-201 Rev. 1 14.5 SEER VALUE SERIES CONDENSING UNITS Features Painted louvered steel cabinet Easily accessible control box Condenser coils constructed with copper
Product Specifications EFFICIENT 13 SEER AIR CONDITIONER
EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY BALANCED R- 410A REFRIGERANT 1-1/2 THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1- phase, 60 Hz REFRIGERATION CIRCUIT S Copeland Scrollt compressors on all
REFRIGERANT SYSTEM R410A Refrigerant High efficiency compressor Copper tubing with enhanced fin coils
MGE4 Gas Heating / Electric Cooling Packaged Thru-the-Wall Units Form No.: MGE4-100 (07/2010) FEATURES Up to 10.6 EER cooling efficiency Completely self-contained heating and cooling package No outside
ET4BE Series R-410A High Efficiency Heat Pump 14 SEER Residential System 1 1/2 5 Ton Capacity
TECHNICAL SPECIFICATIONS ET4BE Series R-410A High Efficiency Heat Pump 14 SEER Residential System 1 1/2 5 Ton Capacity ET4BE Series now offers the choice of a heat pump that uses a more efficient and environmentally
C4A3. Product Specifications EFFICIENT 13 SEER AIR CONDITIONER
ENVIRONMENTALLY SOUND REFRIGERANT C4A3 SoftSound SX 2300 Product Specifications EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1 1/2 THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt,
GPC14H. 2- to 5-Ton Packaged Air Conditioner 14 SEER. Cooling Capacity: 24,000-57,500 BTU/H
H Cooling Capacity: 24,000-57,500 BTU/H 2- to 5-Ton Packaged Air Conditioner 14 SEER Contents Nomenclature... 2 Product Specifications... 3 Expanded Cooling Data... 4 Airflow Data... 16 Heater Kit Specifications...
BCS2**V. Enhanced Air Handler APPLICATION INSTALLATION CABINET ACCESSORIES COMPONENTS
Enhanced Air Handler BCS2**V APPLICATION 2-5 ton sizes Upflow and horizontal (counterflow capable with kit) Sequenced for demand management External access to heater circuit breakers INSTALLATION 1 Piece
Product Specifications EFFICIENT 13 SEER AIR CONDITIONER
EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY BALANCED R- 410A REFRIGERANT 1-1/2 THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1- phase, 60 Hz REFRIGERATION CIRCUIT S Copeland Scrollt compressors on all
FS5BD-KA Series High Efficiency Air Conditioner 13+ SEER Residential System Ton Capacity
TECHNICAL SPECIFICATIONS FS5BD-KA Series High Efficiency Air Conditioner 13+ SEER Residential System 1.5-5 Ton Capacity The FS5BD Series of air conditioners offers exceptional performance. The unit, when
14.5 SEER HEAT PUMPS. Featuring Industry Standard R-410A Refrigerant TZPL SERIES. Features Coils constructed with copper tubing and enhanced aluminum
FORM NO. PTZ-803 Supersedes Form No. PTZ-781 Featuring Industry Standard R-410A Refrigerant TZPL SERIES Efficiencies up to 14.5 SEER/12.00 EER/8.50 HSPF Nominal Sizes 1.5 to 5 Tons [5.28 kw] to [17.6 kw]
ASXC18. High-Efficiency, ComfortNet -Compatible, Split-System Air Conditioner Up to 19 SEER. Cooling Capacity: 24,000-60,000 BTU/h
ooling apacity: 24,000-60,000 BTU/h High-Efficiency, omfortnet -ompatible, Split-System Air onditioner Up to 19 SEER ontents Nomenclature... 2 Product Specifications... 3 Expanded ooling Data... 4 AHRI
R4A3. Product Specifications EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY BALANCED R- 410A REFRIGERANT
EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY BALANCED R- 410A REFRIGERANT 1-1/2 THRU 5 TONS SPLIT SYSTEM 208/230 Volt, 1- phase, 60 Hz R4A3 Product Specifications REFRIGERATION CIRCUIT S Scroll compressors
M-SERIES MHP4 MODEL NUMBER GUIDE 3 M HP F P 1 ELECTRIC HEAT PUMP PACKAGED UNITS REVISION CODE
ELECTRIC HEAT PUMP PACKAGED UNITS MHP4 FORM NO. MHP4-100 (10/2018) MODEL NUMBER GUIDE 3 M HP 4 11 18 1 F P 1 FACTORY INSTALLED ELECTRIC HEAT 3= 3 KW 5 = 5 KW 7 = 7 KW 10 = 10 KW M = MAGIC-PAK HP = HEAT
AIR CONDITIONERS WA16 SERIES
FORM NO. A66-222 AIR CONDITIONERS Features Outdoor air conditioner designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light commercial
UARDIAN TECHNICAL GUIDE MODELS: GCGD18 THRU 60
TECHNICAL GUIDE GUARDIAN SERIES DRY SHIP AIR CONDITIONER CONDENSING UNITS SHIPPED WITH NITROGEN CHARGE ONLY 13 SEER R-22 1 PHASE 1.5 THRU 5 NOMINAL TONS MODELS: GCGD18 THRU 60 UARDIAN Due to continuous
AFAIR12B. Features. Efficiency: 12 SEER. Warranty: 10-year limited compressor 5-year limited parts. Capacity: 1-1/2 to 5-ton.
AFAIR12B Air Conditioners Features Top discharge directs hot air and noise away from the living area Durable Copeland scroll compressor with internal pressure relief valves and inherent thermal protection
R4H4. Product Specifications
ENVIRONMENTALLY SOUND REFRIGERANT R4H4 Product Specifications EFFICIENT 14 SEER HEAT PUMP ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1 1/2 THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1 phase, 60 Hz REFRIGERATION
N4A6. Product Specifications
ENVIRONMENTALLY SOUND REFRIGERANT N4A6 Product Specifications EFFICIENT UP TO 16.5 SEER/12.2 13.0 EER AIR CONDITIONER ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1 1/2 THRU 5 TONS SPLIT SYSTEM 208/2 Volt,
AVXC20. High-Efficiency, Comfortnet-Compatible, Variable-Speed, Inverter Drive Split System Air Conditioner. Cooling Capacity : 23,600 53,000 BTU/h
AVXC20 Cooling Capacity : 23,600 53,000 High-Efficiency, Comfortnet-Compatible, Variable-Speed, Inverter Drive Split System Air Conditioner Contents Nomenclature... 2 Product Specifications... 3 Expanded
GPC14H 2- to 5-Ton Packaged Air Conditioner Up to 14 SEER
Cooling Capacity: 24,000-57,500 BTU/H H 2- to 5-Ton Packaged Air Conditioner Up to 14 SEER Contents Nomenclature... 2 Product Specifications... 3 Expanded Cooling Data... 5 Airflow Data... 18 Heater Kit
SSX14 PRODUCT SPECIFICATIONS 14 SEER / R-410A HIGH-EFFICIENCY SPLIT SYSTEM AIR CONDITIONER 1½- TO 5-TON COOLING CAPACITY 18,000 TO 56,800 BTU/H
PRODUCT SPECIFICATIONS 14 SEER / R-410A 1½- TO 5-TON COOLING CAPACITY 18,000 TO 56,800 BTU/H HIGH-EFFICIENCY SPLIT SYSTEM AIR CONDITIONER The Goodman Air Conditioner uses the environmentally friendly refrigerant
Nominal Btu/hr. Min. Circuit Ampacity x 35 x 35 3½ 42, , x 35 x , , x 35 x ,000
EFFICIENT 13 SEER 3 PHASE HEAT PUMP 3 THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 3 phase, 60 Hz 460 Volt, 3 phase, 60 Hz REFRIGERATION CIRCUIT Copeland compressors on all models Suction line accumulator
TSA6. Product Specifications. SmartComfort TXC 5600
ENVIRONMENTALLY SOUND REFRIGERANT TSA6 SmartComfort TXC 5600 Product Specifications 16 SEER SINGLE STAGE AIR CONDITIONER WITH OBSERVER COMMUNICATING CONTROL SYSTEM 1½ THRU 5 TONS SPLIT SYSTEM 208 / 230
Q3RD Series. Single Packaged Heat Pump, Single Phase TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS
TECHNICAL SPECIFICATIONS Q3RD Series Single Packaged Heat Pump, Single Phase Q3RD-13 SEER 2 thru 4 Ton Units Cooling: 24,000 to 48,000 Btuh Heating: 23,200 to 48,000 Btuh The Q3 Series single packaged
EFFICIENCY 17 SEER TWO STAGE AIR CONDITIONER WITH OBSERVER
ENVIRONMENTALLY SOUND REFRIGERANT HCA7 QuietComfort DXT+ Product Specifications HIGH EFFICIENCY 17 SEER TWO STAGE AIR CONDITIONER WITH OBSERVER COMMUNICATING CONTROL SYSTEM 2 THRU 5 TONS SPLIT SYSTEM 208
TSTAT0201CW (Sold Separately) Qualifying models only. Max. Fuse or Breaker
HVA9 Product Specifications HIGH EFFICIENCY UP TO 19 SEER VARIABLE SPEED AIR CONDITIONER WITH OBSERVER COMMUNICATING CONTROL SYSTEM 2 THRU 5 TONS SPLIT SYSTEM 208 230 Volt, 1 phase, 60 Hz REFRIGERATION
P5RF Series Single Packaged Air Conditioner Single Phase
TECHNICAL SPECIFICATIONS P5RF Series Single Packaged Air Conditioner Single Phase 15 SEER, 12 EER, R-410A 2 thru 5 Ton Units Cooling: 24,000 to 57,500 Btuh The P5 Series single packaged air conditioners
AIR CONDITIONERS WA14**A SERIES
FORM NO. A66-220 AIR CONDITIONERS Features Outdoor air conditioner designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light commercial
P4SD Series Single Packaged Air Conditioning, 13 SEER 3, 4 and 5 Ton Units
TM TECHNICAL SPECIFICATIONS P4SD Series Single Packaged Air Conditioning, 13 SEER 3, 4 and 5 Ton Units The P4 Series single packaged air conditioners are high efficiency self contained cooling units that
13 SEER HEAT PUMPS Features Coils constructed with copper tubing and enhanced aluminum
FORM NO. P66-774 Supersedes Form No. P66-765 Rev. 4 Featuring Earth-Friendly R-410A Refrigerant 13PJL SERIES earth friendly refrigerant 13 SEER HEAT PUMPS Features Coils constructed with copper tubing
TECHNICAL GUIDE MODELS: RHP14J18 THRU 60 RHP SERIES SPLIT-SYSTEM HEAT PUMPS 14.5 SEER R-410A 1 PHASE 1.5 THRU 5 NOMINAL TONS DESCRIPTION FEATURES
TECHNICAL GUIDE RHP SERIES SPLIT-SYSTEM HEAT PUMPS 14.5 SEER R-410A 1 PHASE 1.5 THRU 5 NOMINAL TONS S: RHP14J18 THRU 60 Due to continuous product improvement, specifications are subject to change without
S6BQ Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Split System 2-Stage Air Conditioner. 7 1/2 and 10 Ton rated at 11.2 EER and 12.
TECHNICAL SPECIFICATIONS S6BQ Series Split System 2-Stage Air Conditioner 7 1/2 and 10 Ton rated at 11.2 EER and 12.9 IEER The S6BQ Series of air conditioners offers exceptional performance. The unit,
CSA6. Product Specifications. SoftSound SXC 2600
16 SEER SINGLE STAGE AIR CONDITIONER WITH OBSERVERr COMMUNICATING CONTROL SYSTEM 1½ THRU 5 TONS SPLIT SYSTEM 208 / 2 Volt, 1- phase, 60 Hz REFRIGERATION CIRCUIT S Copeland Scroll compressors on all models
GP7RD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Air Conditioner, Single Phase WARRANTY
TECHNICAL SPECIFICATIONS GP7RD Series Single Packaged Air Conditioner, Single Phase GP7RD 13 SEER, R-410A 2 thru 4 Ton Units Cooling: 24,000 to 47,000 Btuh The GP7 Series single packaged air conditioners
DZ14S Commercial 3-5 TON, THREE-PHASE SPLIT SYSTEM HEAT PUMP 14 SEER / R-410A
DZ14S Commercial Cooling Capacity: 34,600 to 56,500 BTU/h Heating Capacity: 32,800 to 59,000 BTU/h 3-5 TON, THREE-PHASE SPLIT SYSTEM HEAT PUMP 14 SEER / R-410A Contents Nomenclature...2 Product Specifications...3
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS Model MSA(4,6)BF Series M120 Product Line Extra High Efficiency Air Conditioner 16 SEER 2-5 Ton Capacity 2 The MSA(4,6)BF Series of Maytag air conditioners offers exceptional performance.
DX18TC. High-Efficiency, ComfortNet -Compatible, Split System Air Conditioner Up to 19 SEER. Cooling Capacity: 34,600-58,000 BTU/h
DX18T ooling apacity: 34,600-58,000 BTU/h High-Efficiency, omfortnet -ompatible, Split System Air onditioner Up to 19 SEER ontents Nomenclature... 2 Product Specifications... 3 Expanded ooling Data...
14.5 SEER HEAT PUMPS. Featuring New Industry Standard R-410A Refrigerant TZPL SERIES
FORM NO. PTZ-781 Supersedes Form No. PTZ-781 Featuring New Industry Standard R-410A Refrigerant TZPL SERIES Manufactured for Thermal Zone Philadelphia, PA (IN CERTAIN MATCHED SYSTEMS) 14.5 SEER HEAT PUMPS
TECHNICAL GUIDE MODELS: RHP13J30 THRU 60 (3 ) RHP SERIES SPLIT-SYSTEM HEAT PUMPS 13 SEER R-410A 3 PHASE 2.5 THRU 5 NOMINAL TONS.
TECHNICAL GUIDE RHP SERIES SPLIT-SYSTEM HEAT PUMPS 13 SEER R-410A 3 PHASE 2.5 THRU 5 NOMINAL TONS S: RHP13J30 THRU 60 (3 ) Due to continuous product improvement, specifications are subject to change without
Bosch BOVA Split System Heat Pump
Bosch BOVA Split System Heat Pump Condensing Units Up to 18 SEER 2-3-4-5 Ton Capacity R410A Product Specifications 2 Bosch IDS BOVA Product Specifications Data subject to change 06.2016 Bosch Thermotechnology
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS Model PSH1BF Series M1200 Product Line Ultra High Efficiency Heat Pumps 16 SEER 2-5 Ton Capacity The PSH1BF Series of Maytag heat pumps offers exceptional performance as well as
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS Model CSA4BE Series M120 Product Line High Efficiency Air Conditioner 14 SEER 1.5-5 Ton Capacity 2 The CSA4BE Series of air conditioners offers exceptional performance. The unit,
BCE3 PRODUCT SPECIFICATIONS STANDARD AIR HANDLER APPLICATION INSTALLATION CABINET COMPONENTS ACCESSORIES WARRANTY
PRODUCT SPECIFICATIONS STANDARD AIR HANDLER FORM NO. -100 (05/2014) APPLICATION 1 1/2-5 ton systems Upflow and horizontal (counterflow capable with kits) Sequenced for demand management External access
TECHNICAL GUIDE MODELS: RAC13J18 THRU 60 RAC SERIES SPLIT-SYSTEM AIR CONDITIONERS 13 SEER R-410A 1 PHASE 1.5 THRU 5 NOMINAL TONS
TECHNICAL GUIDE RAC SERIES SPLIT-SYSTEM AIR CONDITIONERS 13 SEER R-410A 1 PHASE 1.5 THRU 5 NOMINAL TONS S: RAC13J18 THRU 60 Due to continuous product improvement, specifications are subject to change without
APARTMENT FAN COILS AVAILABLE WITH FACTORY INSTALLED 5, 7, & 11 kw ELECTRIC HEAT, or NO HEAT R -22 SYSTEMS
COMMERCIAL FSA Product Specifications APARTMENT FAN COILS AVAILABLE WITH FACTORY INSTALLED 5, 7, & 11 kw ELECTRIC HEAT, or NO HEAT R -22 SYSTEMS 1½ THRU 3 TONS FEATURES S TXV metering device factory installed
P7RF Series Two-Stage, Single Phase Packaged Air Conditioner
TECHNICAL SPECIFICATIONS P7RF Series Two-Stage, Single Phase Packaged Air Conditioner 16 SEER, 12 EER 2 thru 5 Ton Units Cooling: 24,000 to 57,500 Btuh The P7 Series single packaged air conditioners are
JT4BD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Heat Pump 13 SEER Residential System Ton Capacity WARRANTY
TECHNICAL SPECIFICATIONS JT4BD Series R-410A High Efficiency Heat Pump 13 SEER Residential System 1.5 5 Ton Capacity The JT4BD Series now offers the choice of a heat pump that uses a more efficient and
BCS2S. Product Specifications ENHANCED AIR HANDLER WITH VARIABLE SPEED APPLICATION INSTALLATION CABINET COMPONENTS CONTROLS ACCESSORIES.
Product Specifications ENHANCED AIR HANDLER WITH VARIABLE SPEED APPLICATION 2-5 ton sizes Upflow and horizontal (counterflow capable with kit) Sequenced for demand management External access to heater
BCE5E PRODUCT SPECIFICATIONS ENHANCED AIR HANDLER APPLICATION INSTALLATION CABINET COILS COMPONENTS WARRANTY
PRODUCT SPECIFICATIONS APPLICATION 2-5 ton systems Sequenced for demand management External access to heater circuit breakers FORM NO. -100 (11/2018) INSTALLATION One piece design Smaller profile for closet
Bosch BOVA Split System Heat Pump
Bosch BOVA Split System Heat Pump Condensing Units Up to 18 SEER 2-3-4-5 Ton Capacity R410A Product Specifications 2 Bosch IDS BOVA Product Specifications Data subject to change 03.2018 Bosch Thermotechnology
Product Data PH13NAZ. DUCTED HEAT PUMP Sizes 018 To To 5 Nominal Tons INDUSTRY LEADING FEATURES / BENEFITS
DUCTED HEAT PUMP Sizes 018 To 060 1.5 To 5 Nominal Tons Product Data A08379 INDUSTRY LEADING FEATURES / BENEFITS Energy Efficiency S Sound S Levels as low as 71 dba Design Features S New aesthetics S Small
AFGP12B. Features. Efficiency: 12 SEER 80% AFUE. Warranty: 10-year limited compressor 10-year limited heat exchanger 5-year limited components
AFGP12B Gas/Electric Package Unit Features Shipped for horizontal applications; easily converted to downshot Side-by-side horizontal discharge Standard thermostatic expansion valve Crimp-Tite weld-free