Series 452 Standard Cylinder to ISO 15552

Transcription

1 Series Standard Cylinder to ISO

2 Table of Contents Series Series Cylinder Features and Benefits 3 Cylinder How to Order 4 Single and Double Rod 5 Cylinder Standard Mount Information 6-12 Position Detector Information Series Slide Features and Benefits 20 Slide How to Order 21 Slide Load Information 22 Slide Standard Mount Information 23 Rod Locking Units Cylinder Repair Information 26

3 ISO Series (Profile Tube) The Series is an aluminum body air cylinder line that is designed to meet all international cylinder requirements. The Series meets the following international standards: ISO/DIS & AFNOR. The combination of robust construction and a multitude of value-added features make the Series the superior ISO cylinder line in the market. The robust, self-lubricating rod bushing design also includes a standard non-abrasive rod wiper. Position sensing is made easy because of the 2 "T" grooves that are located on the same side as the ports and cushion adjustment. Precise cushion adjustment via the micrometer captive screw design G Ports - Conforms to ISO standards. Hard chrome plated piston rod. The compact and sturdy aluminum profile tube is hard anodized to ensure long cylinder life. General Detection: quipped for magnetic position sensors Fluid: Air Operating pressure: 10 bar max./150 PSI Ambient temperature: 20 C to +70 C (-4 F to 158 F) Optimal max. speed: 1 m/s (for optimal service life) Max. speed rate: 2 m/s Standards: ISO AFNOR NF ISO DIN ISO (replace ISO 6431-AFNOR NF VDMA 24562) Construction Tube: nd Caps: Tube/nd Cap Connection: Bearing: Cushioning seals: Cushioning: Rod: Rod nut: Piston: Piston seals: Hard anodized aluminum alloy Aluminum alloy Steel sleeve bolts Self lubricating steel backed composite PUR (polyurethane) Pneumatic, adjustable from both sides with captive screw Hard chrome plated steel Galvanized steel Ø 32 to 80 mm: POM (polyacetal) Ø 100 mm: light alloy, fitted with an annular permanent magnet PUR (polyurethane) 425

4 ISO How To Order Series Series = Profile Tube Version 1 = ISO Cylinder Type 00 = Single Rod, Cushioned 0A = Double Rod, Cushioned Sensor Groove Location 0 = Position 1 3 = Position 2 6 = Position 3 9 = Position 4 Bore 3 = 32mm 4 = 40mm 5 = 50mm 6 = 63mm 8 = 80mm 1 = 100mm Options 000 = Cylinder w/o mounting parts and options 01 = No Cushions 01A* = Rod xtension 02A* = Thread xtension 0SA = Stainless Rod 01R = Special Rod Thread 012 = Rod and Thread xtension BMI = Nu Lock Rod Lock Mount C01 = Foot Bracket (Outside) Mount CV9 = Mid Trunnion CF2 = Front Flange Mount CR2 = Rear Flange Mount CF4 = Rod Clevis Mount CD4 = Rod Clevis Mount Both nds (Double Rod) CF5 = Spherical ye Mount (Front Side) CD5 = Spherical ye Mount (Both Sides - Double Rod) C07 = Oscillating Bracket with Lugs C08 = Oscillating Bracket with Wide Fork Type Mount C13 = Spherical ye Mount (Back Side) C14 = Oscillating Bracket with Narrow Fork Type Mount Consult factory for combination options. *Specify length Stroke 0015 = 15mm (Minimum Stroke) 2000 = 2000mm (Maximum Stroke) Port Chart Bore Port Size Rod Threads 32mm G 1/8 M10 x mm G 1/4 M12 x 1.25 Switch/Sensor Position 1 50mm G 1/4 M16 x mm G 3/8 M16 x mm G 3/8 M20 x mm G 1/2 M20 x Standard Cylinder Mounting Options CF2 - Front Flange CR2 - Rear Flange C01 - Foot C08 - Oscillating Bracket with Wide Fork Type Mount C07 = Oscillating Bracket with Lugs C14 - Oscillating Bracket with Narrow Fork Type Mount CV9 - Mid Trunnion CF4 - Front Clevis CF5 - Spherical ye Mount (Front Side) 426

5 ISO Dimensions: mm, Weight: kg Series - Single Rod ZJ + STROK M L8 + STROK TG A WH L2 VD PL PL VA KW TG ØB Series - Double Rod TG MM SW KV KK M B L8 + STROK M + STROK WH PL L2 A ZM + (2 X STROK) A VD PL BG ØRT KW TG KV KK SW MM B BG ØRT Ø A *ØB d11 BG KK KV KW L2 L8 M ØMM PL ØRT SW TG VA VD (min.) G1/8 M10x M6x ± G1/4 M12x M6x ± G1/4 M16x M8x ± G3/8 M16x M8x ± G3/8 M20x M10x ± G1/2 M20x M10x ± Ø WH ZJ ZM Weight *Dimensional tolerances according to standard ISO Cylinder weight with 0 mm stroke 2 Weight to be added per additional 100 mm length. 427

6 ISO Dimensions: mm, Weight: kg Rectangular Front or Rear Mounting Flange - (CF2 and CR2) CF2 R W MF UF TF ØFB HOLS (4 PLACS) CR2 ZF + STROK ZJ + STROK R UF TF ØFB HOLS (4 PLACS) Ø ØFB MF R TF UF W ZJ ZF Weight Weight based off of steel mounting hardware. Foot Bracket Mount - C01 XA + STROK max. TG AT AH AU AU AO max. TR ØAB HOLS (4 PLACS) SA + STROK Port and cushion location shown in position 2. Ø ØAB AO AH AT AU TR TG SA XA Weight based off of steel mounting hardware. 428 Weight 2 (Bracket Set)

7 Standard Mount Information Dimensions: mm, Weight: kg Oscillating Bracket with Fork Type Mount - C08 Y UB TG CB FL XD + STROK MR max. TG ØCD Port and cushion location shown in position 2. Oscillating Bracket with Lugs - C07 XD + STROK TG W FL MR max. TG ØCD Port and cushion location shown in position 2. Weight (kg) Bore Y CB CD W FL MR TG UB XD C07 C08 32mm mm mm mm mm mm

8 Standard Mount Information Dimensions: mm Right Angle Articulated Joint - C11 These mountings must be ordered separately Bore Ø Weight (kg) Aluminum Y UL TG M GL FL XD + STROK ØCK TG PH BT L5 T ØHB MOUNTING HOLS RA (4 PLACS) UR Port and cushion location shown in position 2. Ø BT ØCK e em *gl JS14 Øhb l5 *ph JS14 ra te tg ul ur y XD *Dimensional tolerances according to ISO standards. 430

9 Standard Mount Information Dimensions: mm Oscillating Bracket with Narrow Fork Type Mount - C14 FM XD + STROK SR max. ØCF Port and cushion location shown in position 2. Spherical ye Mount (Back Side) - C13 XN + STROK MS max. DL ØCX Port and cushion location shown in position 2. Weight (kg) Bore CX DL FM SR XD XN C13 C14 32mm mm mm mm mm mm

10 Standard Mount Information Dimensions: mm Right Angle Articulated Joint with Spherical Bushing - C12 These mountings must be ordered separately Bore Ø Weight (kg) Steel FM G1 Js14 10 CH Js15 Ø CF H7/h9 4 4 N +0-0,1 K1 K2 max. L65/2 4Ø S5 G2 G3 max. Ø CH ØCF FM N g1 g2 g3 k1 k2 L65/2 ØS

11 Standard Mount Information Dimensions: mm, Weight: kg Mid Trunnion Mount - CV9 Ø mm XV max. with "T" detectors XV Min. ➀ min ➀ ➀ ➀ ➀ ➀ ➀ UWA TG TM TG TL ØTD XI TK Dimension XI is specified on order 1 Stroke Mounting Blocks for Mid Trunnion UL = = TH = = Ød4 H3 TM h14 = L5 = = L6 = = = Ø CR H9 UL = = TH = = Ø HB NH FN = = C FK Ø C cr Ød4 fk fn hb h3 l5 l6 nh tg th tk td TPC9 tl H14 tm ul zj , weight Ø Mid Trunnion Supports MT4 for PS 450 Set (2 Supports)

12 Standard Mount Information Dimensions: mm Female Clevis - CF4 Spherical Bearing Rod nd - CF5 ØCK H9/d10 max. AV B max. CM L C ØCN H9 AX R max. CL ØKK N h12 α α ØKK R max. LF CH α: spherical angular compensation 4 Ø cylinders AV-AX B C CH ØCK CL CM ØCN N R ØKK L LF weight (kg) CF4 CF M10x M12x M16x M16x M20x M20x Alignment Coupler R A KW A1 4 økk 4 økk T P W1 W2 1 Stroke 2 Dimensions on Flats Ø cylinders A A1 P(2) ØKK KW R T W1 W2 X radial compensation (mm) weight (kg) M10x M12x M16x M16x M20x M20x Radial compensation: 0.5 to 1 mm (see table) Spherical angular: compensation : 4 Note: The compensator is preset with an axial clearance of 0.05 to Do not reset.

13 Standard Mount Information Standard Mounting Hardware Mountings Conforming with ISO ISO AFNOR NF ISO DIN ISO Standards 1 Corresponds to a set of 2 parts. low feet 1 C01 rectangular front or rear flange CF2 - CR2 Mid Trunnion - CV9 supplied fixed/xi Construction Stamped Sheet Steel Steel Cast Iron For Cylinder Ø Catalog Number Oscillating Bracket with Wide Fork Type Mount - C08 Oscillating Bracket with Lugs - C07 angular clevis bracket C11 Construction aluminium + bushing light alloy aluminium + bushing For Cylinder Ø Catalog Number

14 Standard Mount Information Standard Mounting Hardware (continued) narrow cap clevis for spherical eye or clevis bracket C14 cap eye with spherical eye 6 C13 angular clevis bracket spherical bearing 6 C12 Female rod clevis ISO RP102P CF4 spherical rod end ISO8139-RP103P CF5 alignment compensator 7 C16 Construction Forged Steel Forged Steel Forged Steel Steel Steel Steel For Cylinder Ø Catalog Number These accessories allows accurate angular compensation adjustment spherical of 4 7 This accessory allows accurate angular compensation adjustment spherical of 4 and radial of 0.7 mm 436

15 Standard Mount Information Sensors Direct Mount No Bracket Required Sensor Description Standard Cord Set Quick Disconnect Reed Switch RD-FL2-00 RD-QDS-M8U Hall PNP PNP-FL2-00-U PNP-QDS-M8-U Hall NPN NPN-FL2-00-U NPN-QDS-M8-U See page 16, 17, & 18 for Sensor Specifications Quick Disconnect Cables [5000] 1.50 [38.1] 1.2 [31] [5000] 1.06 [27] 1.50 [38.1] BLU ( ) BROWN (+) BLACK (OUTPUT) 26 GAUG WIRS PXCST ø.4 [10] M8 x 1 Wiring Core colors BK black BN brown BU blue 3 BLU ( ) BROWN (+) BLACK (OUTPUT) 26 GAUG WIRS 4 1 BN 3 BU 1 4 BK PXC90 ø.4 [10].71 [18] M8 x 1 Order Code Type Operating Voltage Current Rating Cable Material Protection PXCST Straight 5 m Cable (3 x 26 Gauge wire) 60 AC/75 DC 3 A PUR IP 68, III M8 PXC m Cable (3 x 26 Gauge wire) 60 AC/75 DC 3 A PUR IP 68, III M8 Connector 437

16 "T Slot" Position Detectors Read Switch and Magneto-Resistive Types Sensing Part Numbers PNP-FL2-00-U PNP-QDS-M8-U 1.50 [38.1] PART NUMBR.98 [25.0] LD.25 [6.4].20 [5.1] 1.46 [37.0] PART NUMBR.98 [25.0] LD.25 [6.4].20 [5.1] PNP-FL2-00-U.20 [5.0] PNP-QDS-M8-U.20 [5.0] [2000.0] SNSING FAC [300.0] SNSING FAC BLU (-) BLACK (OUTPUT) BROWN (+) 26 GAUG WIRS FASTNING CLAMP M8 x 1.0 FASTNING CLAMP LCTRICAL DSIGN DC PNP LCTRICAL DSIGN DC PNP OUTPUT Normally Open OUTPUT Normally Open OPRATING VOLTAG VDC OPRATING VOLTAG VDC CURRNT RATING 100 ma CURRNT RATING 100 ma SHORT-CIRCUIT PROTCTION SHORT-CIRCUIT PROTCTION OVRLOAD PROTCTION OVRLOAD PROTCTION RVRS POLARITY PROTCTION RVRS POLARITY PROTCTION VOLTAG DROP < 2.5 V VOLTAG DROP < 2.5 V CURRNT CONSUMPTION < 12 ma CURRNT CONSUMPTION < 12 ma RPATABILITY <.2mm POWR-ON DLAY TIM < 30 ms SWITCH FRQUNCY > 3000 Hz AMBINT TMPRATUR -25ºC to 85ºC PROTCTION IP 67, III HYSTRSIS 1.0mm MAGNTIC SNSITIVITY 2.0 mt TRAVL SPD > 10 m/s RPATABILITY <.2mm POWR-ON DLAY TIM < 30 ms SWITCH FRQUNCY > 3000 Hz AMBINT TMPRATUR -25ºC to 85ºC PROTCTION IP 67, III HYSTRSIS 1.0mm MAGNTIC SNSITIVITY 2.0 mt TRAVL SPD > 10 m/s HOUSING MATRIAL PA (Polyamide) Black; Fastening Clamp: Stainless Steel HOUSING MATRIAL PA (Polyamide) Black; Fastening Clamp: Stainless Steel FUNCTION DISPLAY SWITCHING STATUS Yellow LD FUNCTION DISPLAY SWITCHING STATUS Yellow LD CONNCTION Flying Leads, Pur Cable (2m Long, 3 x26 Gauge Wire) CONNCTION M8 Connector (Snap Fit), Pur Cable (.3 m) RMARKS Clamping Screw with Combined Slot/Hexagon Socket Head AF 1.5 culus - Class 2 Source Required RMARKS Clamping Screw with Combined Slot/Hexagon Socket Head AF 1.5 culus - Class 2 Source Required ACCSSORIS Rubber Placehold, Cable Clip, and Cut Sheet To Be Provided with very Switch ACCSSORIS Rubber Placehold, Cable Clip, and Cut Sheet To Be Provided with very Switch AGNCY APPROVALS RoHS AGNCY APPROVALS RoHS *Switches are not designed for wet environments. Please see your distributor for additional information. 438

17 "T Slot" Position Detectors Read Switch and Magneto-Resistive Types Sensing Part Numbers 1.50 [38.1] NPN-FL2-00-U NPN-QDS-M8-U PART NUMBR.98 [25.0] LD.25 [6.4].20 [5.1] 1.46 [37.0] PART NUMBR.98 [25.0] LD.25 [6.4].20 [5.1] NPN-FL2-00-U.20 [5.0] NPN-QDS-M8-U.20 [5.0] [2000.0] SNSING FAC [300.0] SNSING FAC BLU (-) BLACK (OUTPUT) BROWN (+) 26 GAUG WIRS FASTNING CLAMP M8 x 1.0 FASTNING CLAMP LCTRICAL DSIGN DC NPN LCTRICAL DSIGN DC NPN OUTPUT Normally Open OUTPUT Normally Open OPRATING VOLTAG VDC OPRATING VOLTAG VDC CURRNT RATING 100 ma CURRNT RATING 100 ma SHORT-CIRCUIT PROTCTION SHORT-CIRCUIT PROTCTION OVRLOAD PROTCTION OVRLOAD PROTCTION RVRS POLARITY PROTCTION RVRS POLARITY PROTCTION VOLTAG DROP < 2.5 V VOLTAG DROP < 2.5 V CURRNT CONSUMPTION < 12 ma CURRNT CONSUMPTION < 12 ma RPATABILITY <.2mm RPATABILITY <.2mm POWR-ON DLAY TIM < 30 ms POWR-ON DLAY TIM < 30 ms SWITCH FRQUNCY > 3000 Hz SWITCH FRQUNCY > 3000 Hz AMBINT TMPRATUR -25ºC to 85ºC AMBINT TMPRATUR -25ºC to 85ºC PROTCTION IP 67, III PROTCTION IP 67, III HYSTRSIS 1.0mm HYSTRSIS 1.0mm MAGNTIC SNSITIVITY 2.0 mt MAGNTIC SNSITIVITY 2.0 mt TRAVL SPD > 10 m/s TRAVL SPD > 10 m/s HOUSING MATRIAL PA (Polyamide) Black; Fastening Clamp: Stainless Steel HOUSING MATRIAL PA (Polyamide) Black; Fastening Clamp: Stainless Steel FUNCTION DISPLAY SWITCHING STATUS Yellow LD FUNCTION DISPLAY SWITCHING STATUS Yellow LD CONNCTION Flying Leads, Pur Cable (2m Long, 3 x26 Gauge Wire) CONNCTION M8 Connector (Snap Fit), Pur Cable (.3 m) RMARKS Clamping Screw with Combined Slot/Hexagon Socket Head AF 1.5 culus - Class 2 Source Required RMARKS Clamping Screw with Combined Slot/Hexagon Socket Head AF 1.5 culus - Class 2 Source Required ACCSSORIS Rubber Placehold, Cable Clip, and Cut Sheet To Be Provided with very Switch ACCSSORIS Rubber Placehold, Cable Clip, and Cut Sheet To Be Provided with very Switch AGNCY APPROVALS RoHS AGNCY APPROVALS RoHS *Switches are not designed for wet environments. Please see your distributor for additional information. 439

18 "T Slot" Position Detectors Read Switch and Magneto-Resistive Types Sensing Part Numbers RD-FL [5.7] 1.50 [38.1] PART NUMBR 1.20 [30.5].25 [6.4].20 [5.1] 1.46 [37.0].22 [5.7] RD-QDS-M8U PART NUMBR 1.20 [30.5].25 [6.4].20 [5.1] RD-FL2-00 T AA [5.0] RD-QDS-M8U T AA [5.0] [2000.0] BLU (-) BROWN (+) 26 GAUG WIRS LD FASTNING CLAMP M8 x [300.0] LD FASTNING CLAMP LCTRICAL DSIGN OUTPUT OPRATING VOLTAG CURRNT RATING SHORT-CIRCUIT PROTCTION OVRLOAD PROTCTION RVRS POLARITY PROTCTION VOLTAG DROP RPATABILITY MAKTIM INCLUDING BOUNC BRAKTIM SWITCHING POWR (MAX) SWITCH FRQUNCY AC/DC RD Normally Open VAC/DC 100 ma* No No < 5 V ±.2mm <.6 ms <.1 ms 5 W 1000 Hz AMBINT TMPRATUR -25ºC to 70ºC PROTCTION HYSTRSIS HOUSING MATRIAL FUNCTION DISPLAY SWITCHING STATUS CONNCTION IP 67, II.9mm PA (Polyamide) Black; Fastening Clamp: Stainless Steel Yellow LD Flying Leads, Pur Cable (2m Long, 2 x26 Gauge Wire) LCTRICAL DSIGN OUTPUT OPRATING VOLTAG CURRNT RATING SHORT-CIRCUIT PROTCTION OVRLOAD PROTCTION RVRS POLARITY PROTCTION VOLTAG DROP RPATABILITY MAKTIM INCLUDING BOUNC BRAKTIM SWITCHING POWR (MAX) SWITCH FRQUNCY AC/DC RD Normally Open *5-60 VDC / 5-50 VAC 100 ma No No < 5 V ±.2mm <.6 ms <.1 ms 5 W 1000 Hz AMBINT TMPRATUR -25ºC to 70ºC PROTCTION HYSTRSIS HOUSING MATRIAL FUNCTION DISPLAY SWITCHING STATUS CONNCTION IP 67, II.9mm PA (Polyamide) Black; Fastening Clamp: Stainless Steel Yellow LD M8 Connector (Snap Fit), Pur Cable (.3m) RMARKS *xternal Protective Circuit for Inductive Load (Valve, Contactor, tc..) Necessary. Conforms to 2008 NC Section 725 III, Class 2 Circuits Clamping Screw with Combined Slot/Hexagon Socket Head AF 1.5. No LD Function in case of Polarity in DC Operation RMARKS *xternal Protective Circuit for Inductive Load (Valve, Contactor, tc..) Necessary. Conforms to 2008 NC Section 725 III, Class 2 Circuits M8 Connector voltage limited to 5-60 vdc / 5-50 vac to conform with 2008 IC Clamping Screw with Combined Slot/Hexagon Socket Head AF 1.5. No LD Function in case of Polarity in DC Operation ACCSSORIS AGNCY APPROVALS Rubber Placehold, Cable Clip, and Cut Sheet To Be Provided with very Switch RoHS ACCSSORIS AGNCY APPROVALS Rubber Placehold, Cable Clip, and Cut Sheet To Be Provided with very Switch RoHS *Switches are not designed for wet environments. Please see your distributor for additional information. 440

19 Series Standard Cylinder to ISO

20 Slide The ISO VDMA Guide units conform to the ISO standards. Utilizing the GeoMetric cylinders these guide units offer high load carrying capabilities. B A C D A. Clear anodized Aluminum Body B. Alignment coupler isolates Piston Rod from side loading C. The rugged repairable ISO Series cylinder. D. Available bearing options include linear ball or bronze bushings.. Precision ground hardened steel guide shafts. 442

21 Slide How to Order Complete Guide Units (Guide Units Include Cylinder) FHG 050 / C X XX Cylinder Series FHG = Guide unit with sintered bronze bushing, H-version FHK = Guide unit with linear ball bearing, H-version Bore Size 032 = 32mm 040 = 40mm 050 = 50mm 063 = 63mm 080 = 80mm 100 = 100mm / = BSPP Port *N = NPTF Port * Not an option for 100mm bore. Stroke 050 = 50mm 100 = 100mm 160 = 160mm 200 = 200mm 250 = 250mm 320 = 320mm 400 = 400mm 500 = 500mm Options XX = No Options S = Stop Collars for xtend Stroke SR = Stop Collars for Retract Stroke SB = Stop Collars for xtend & Retract Rod Lock N = With Nu Lock X = Without Rod Lock Sensing Position A = Single Pos. xtend B = Single Pos. Retract C = Two Position D = No Sensing Sensing Type Standard Cord Set 1 = Hall ffect PNP (Sourcing) 2 = Hall ffect NPN (Sinking) 3 = Reed Switch 6 = No Sensing Quick Disconnect Cord Set Z = Hall ffect PNP (Sourcing) Y = Hall ffect NPN (Sinking) X = Reed Switch Order example: FHG050/1001CXXX Part Description: H-Style with bronze bushing, 50 mm bore, BSPP ports 100 mm stroke with Hall PNP switches 2 position, no Rod Lock, no stop collars. Weights: Kg Type FHG; Piston Diameter (mm) mm stroke To be added per 100 mm stroke Type FHK; Piston Diameter (mm) mm stroke To be added per 100 mm stroke Lbs. = Kg X Weights for guide unit only, see page 2 for cylinder weight. 443

22 Slide Maximum permissible loads in relation to stroke F (MAXIMUM PRMISSIBL LOADS IN N) F (MAXIMUM PRMISSIBL LOADS IN N) FHG Sintered Bronze bushing Static ratings (Dynamic = load X.5) FHK Linear Ball Static ratings (Dynamic = load X.65) STROK mm FHG: Guide unit, long, with sintered bronze bushing FHK: Guide unit, long, with linear ball bearing With short strokes up to 60 mm, a reduction of load with linear ball bearings occurs. This is already taken into account in the diagrams. Increasing of max. load by 25 %, results in a reduction of lifetime of linear ball bearing to 2 x 10 6 m. For shock applications with linear ball bearings multiply load capacity by factor 0.5. FHG: Guide unit, long, with sintered bronze bushing FHK: Guide unit, long, with linear ball bearing The total deflection of the guide rods against rod projection is the sum of deflection by own weight and deflection by load. Deflection in function of load is linear (with double load double deflection) F1=Fx0.9N STROK mm 444

23 Slide Dimensions: mm Guide Units Guide Unit FHG and FHK, version H with Sintered Bronze Bushing or Linear Ball Bearing V1 V G L1 V Ch R C U Z A V T F H L2 D O L3 L6 + Stroke B O L4 L5 + Stroke R V V P N R Q ØI V Type Piston Ø A B C Ch D F G H ØI L1* L2 L3 L4 L5* L6 FHG/FHK FHG/FHK FHG/FHK FHG/FHK FHG/FHK FHG/FHK *Add an additional 22 mm when ordered with retract stop collars. Type Piston Ø N O P Q R T U V V1* Z FHG/FHK M FHG/FHK M FHG/FHK M FHG/FHK M FHG/FHK M FHG/FHK M

24 Rod Locks The Nu Lock Series is a comprehensive rod lock product line that is designed with safety in mind. The cutting edge design allows for effortless load holding during mergency Stop (- Stop) conditions. It is designed to mechanically lock a cylinder piston rod in the event of an air supply failure. Use caution when applying the Nu Lock Series rod lock unit. It should not be used to brake the cylinder piston rod in dynamic conditions. Nu Lock Series Standard Specifications: conomical OM type rod lock Compact profile NFPA sizes: 1-1/2 to 5 bores VDMA sizes: 32 mm to 125 mm bores Minimum unlocking air pressure is 45 psi (3 Bar) Maximum unlocking air pressure is 90 psi (6 Bar) Clamping force on all Nu Lock Series units is equal to the area of the cylinder piston at 145 psi (10 Bar) All standard NFPA and ISO/VDMA mounting accessories can be used with the RL Series installed on the cylinder Temperature rating: -10 F to 165 F The Nu Lock Series individual locking units are recommended for replacement use only. This particular unit must be used with a chrome plated steel cylinder piston rod. Consult factory for additional details. 446

25 Rod Locks Dimensions: mm Nu Lock Series C M P D N C øl S G TAP X R DP B øh øa øh B C1 NFPA Locking Unit Dimensions (inches) F Part No. Bore ØA* B C C1 D F G ØH ØL M N P R S BMA/K 1-1/2" /4-28 UNF /8 NPTF BMA/L 2" /16-24 UNF /8 NPTF BMA/M 2-1/2" /16-24 UNF /8 NPTF BMA/P 3-1/4" /8-24 UNF /4 NPTF BMA/R 4" /8-24 UNF /4 NPTF BMA/T 5" /2-20 UNF /4 NPTF Weight lb ISO Locking Unit Dimensions (mm) Part No. Bore ØA* B C C1 F G ØH ØL M N P R S BMI/ mm M /8" G BMI/ mm M /8" G BMI/ mm M /8" G BMI/ mm M /8" G BMI/ mm M /4" G BMI/ mm M /4" G BMI/ mm M /4" G Weight kg * Dimension denotes cylinder piston rod diameter. 447

26 Kit Information How To Order Series Repair Kit G Type G298 = G2 Series Repair Kit Version 3 = 32mm 4 = 40mm 5 = 50mm 6 = 63mm 8 = 80mm 1 = 100mm Options 000 = No Options 01 = No Cushions Cylinder Type 00 = Single Rod 0A = Double Rod Repair kit includes a loaded cylinder head and all seals. Piston Rod Assembly How to Order G Type G292 = Series Piston Rod Assembly Version 3 = 32mm 4 = 40mm 5 = 50mm 6 = 63mm 8 = 80mm 1 = 100mm Options 000 = No Options 01 = No Cushions Stroke 0005 = 5mm (minimum) 0A = 2000 = 2000mm (maximum) Cylinder Type 00 = Single Rod 0A = Double Rod Piston rod assembly includes all piston seals. 448

27 World Class Supplier of Pneumatic Components World Headquarters USA Numatics, Incorporated Dylan Drive Novi, Michigan P: F: Canada Numatics, Ltd P: F: México - Ascomatica SA de CV P: (DF y Area metropolitana) P: ASCO (2726) (Interior de la República) F: Brazil Ascoval Ind.e Comercio Ltda P: (55) F: (55) LT-Series Rev 1/13 5M-IPC-01/10 Numatics Inc Numatics is registered in the United States and elsewhere Numatics, Inc. Tel (248) insidesales@numatics.com