MODEL ZX1 CHARACTERISTICS, POTENCY AND BENEFITS

Transcription

1 MODEL ZX1 CHARACTERISTICS, POTENCY AND BENEFITS ADAPTIV-ROLLSTÜHLE ECONOMICAL Continuous provision with adjustment possibilities, reduces additional follow-up costs Wide range of standard options minimises the need for expensive custom-made versions Light weight due to the integral design of the frame and the high quality material of the options, reduces wear costs BENEFIT ACCORDING TO THERAPEUTIC ASPECTS The optimal smoothness and the low weight supports the independence of the user Adaptable to changes in function and individual users' needs by precise adjustmens of the back, the seat and the suspension Extensive range of facilities for long-term users The optimised frame ensures compact sitting, driving and transportation Reduced by 3 cm, the compact version of the ZX1 will meet specific requirements for a compact seating position (front frame angle 85 ) Improved handling characteristics: light, sporty, tilt-and-revving FIELDS OF APPLICATION For continuous and long-term provisions For provisions in spinal cord injury Ideally suited for many diseases, including severe affected For users without functions of the lower limbs (lateral transfer, driven by the push rim) For very active wheelchair users, hand cycles and frequent travelers 119

2 EQUIPMENT AND CODES INTRODUCTION Dear customer, thank you very much for your choice of the ZX1. To ensure the right configuration and a faultless product order at least 20 selections in 16 categories have to be made. Our example shows a standard configuration of the ZX1. CAT CODE FSH RSH Additionally you may select further equipment, options and accessories at extra cost. Mark your selection in the "YES" column on the odd pages of our ORDER FORM! TECHNICAL DATA Seat width in cm Client weight 120 Width ready to go in mm Empty weight ~ 9 Width folded in mm 300 with 0,5 wheel camber resp. 350 with 3 wheel camber Permitted overall weight 129 Seat depth in cm 38 / 40 / 42 / 44 / 46 / 48 Transport weight ~ 6,7 Seat height front / rear in cm 46 to 52 / 40 to 48 Rear wheel 610 (24") Overall height in mm Seat height rear + back height Back rest height in cm variable from 25 to 45, 50 in combination with height adjustable push handles Code 410 Arm support height in cm ca Length with footrests in mm depending on frame length, wheel size and axle position Weights in kg, wheels in mm, tolerances ± 1 cm 00 FRAME FORM (FRAME LENGTH) C 352 C 353 C 354 Overall height Rear seat height Axle position LSL Front seat height Frame short Frame medium Frame long i.c.w. Code 346 i.c.w. Code 347 i.c.w. Code 346 i.c.w. Code 347 i.c.w. Code 346 i.c.w. Code 347 FL = 595 mm FL = 565 mm FL = 635 mm FL = 605 mm FL = 675 mm FL = 645 mm SD = cm SD = cm SD = cm SD = cm SD = cm SD = cm OL = mm OL = mm OL = mm OL = mm OL = mm OL = mm Frame length Overall length ground clearance A compact frame length (FL) depends on the selection of your seat depth! The overall length (OL) depends on the frame length, wheel size and axle position 00 FRAME FORM (FRAME ANGLE AND FRONT FRAME INSET) C 346 C 347 C 4950 C SEAT WIDTH SEAT WIDTH FRAME INSET WITHOUT FRAME INSET 01 DETERMINE THE SEAT WIDTH (SW) On the wheelchair Folding wheelchair: measured between the outer edges of the seat tubes. Rigid frame and adaptive wheelchair: between the side guards. The measure is taken in half of the seat depth and at sitting level. SEAT WIDTH On the client Measure the widest part of the pelvis (trochanter major) in sitting position and add 2 cm. The thighs may touch the side guard. Seat width Note The seat width is the most important dimension of the wheelchair. 120 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.

3 ORDER FORM 1 of 6 ORDER QUOTATION CUSTOM-MADE VERSION Fax Customer service ZX1 MODEL Invoice address / customer no.: Delivery address: Consignment / remarks: Model ZX1 (Price for basic model, with cushion, 24" quick release wheels, aluminium handrim, side guard of high strenght magnesium and height adjustable push handles) 1.795,00 All prices are excl. VAT acc. to legal regulations! Valid from 1. Jan to 31. Dec Our general terms and conditions apply, which can be found on under AGB. Please mark your selection in column "YES" on this page of our ORDER FORM! 00 FRAME FORM (FRAME LENGTH) CAT YES CODE DESCRIPTION FL IN MM SD IN CM OL IN MM POUND Frame short 595* / 565** * / ** 0,00 ADAPTIV-ROLLSTÜHLE Frame medium 635* / 605** */ ** 0, Frame long 675* / 645** * / ** 0,00 Consider and select your seat depth in category 02! *i.c.w. frame Code 346 **i.c.w. frame Code FRAME FORM (FRAME ANGLE AND FRONT FRAME INSET) Standard front frame 77 0, Compact front frame 85 Compact frame is 30 mm shorter. 0, With front frame inset (2 cm per side) 0, Without front frame inset 0,00 01 SEAT WIDTH (SW) SW 34 cm 0, SW 36 cm 0, SW 38 cm 0, SW 40 cm 0, SW 42 cm 0, SW 44 cm 0, SW 46 cm 0, SW 48 cm 0, SW 50 cm 0,00 Standard version In case you do not make another selection we will generally deliver the standard version. 121

4 EQUIPMENT AND CODES 02 DETERMINE THE SEAT DEPTH (SD) at height Back height Seat depth Seat cushion LSL On the wheelchair From the front edge of the backrest to the front edge of the seat system (seat upholstery, solid seat, padded seat). The measure is taken in the middle of the seat. On the client Thigh length, measured from the back to the hollow of the knee minus two finger s width. Note Different back systems as e.g. the adjustable backrest or a solid back change the real seat depth. 03 DETERMINE THE SEAT HEIGHT FRONT (FSH) (WITHOUT SEAT CUSHION) On the wheelchair Vertical from ground to upper edge of seat frame tube Front seat height, measured at the front upper edge of the seat tube on LSL ground clearance Front seat height On the client Shank length plus required ground clearance for the footrests (Shank length + ca. 7 cm) Remark: Please consider the height of the seat cushion! Example with seat cushion: LSL + ground clearance + seat cushion = FSH Example without seat cushion: LSL + ground clearance = FSH 03 C x 30 mm 4" 03 C x 30 mm 5" 03 C x 37 mm 5,5" 03 Article x 23 mm 4" 03 Article x 25,4 mm 4" 03 Article x 25,4 mm 4" 03 Article x 25,4 mm 5" Soft solid rubber Transparent / Coloured 03 Article Article Article x 32 mm 125 x 32 mm 125 x 25,4 mm 4" 5" 5" 04 C cm 122 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.

5 ORDER FORM 2 of 6 02 SEAT DEPTH (SD) CAT YES CODE DESCRIPTION FRAME CODE POUND SD 38 cm incl. utensils bag under the seat upholstery 352 0, SD 40 cm incl. utensils bag under the seat upholstery 352 0, SD 42 cm incl. utensils bag under the seat upholstery 353 0, SD 44 cm incl. utensils bag under the seat upholstery 353 0, SD 46 cm incl. utensils bag under the seat upholstery 354 0, SD 48 cm incl. utensils bag under the seat upholstery 354 0,00 03 SEAT HEIGHT FRONT (FSH) COMBINED WITH CASTOR (WITHOUT SEAT CUSHION) Horizontal columns = seat heights in cm Vertical line = Ø castor sizes in mm Please select your desired seat height through the combination of seat height and wheel size. The maximum admissible seat height differenz between front and rear seat height is amounts to 10 cm! Ø 100 C 151 FSH ADAPTIV-ROLLSTÜHLE Ø 125 C 325 Ø 142 Soft solid rubber C 327 With the front seat height selection a standard castor is automatically configured. As an option please select castors from the Xtrends table below. 03 X-TRENDS CASTORS CAT YES CODE ARTICLE DESCRIPTION RIM TYRES Ø x B POUND Lightwheel (pair) Plastic 100 x 23 mm 50,00 transparent / coloured Castor (pair) Alu silver 100 x 25,4 mm 110, Castor (pair) Alu silver 125 x 25,4 mm 110, Castor (pair) Alu black 100 x 25,4 mm 110, Castor (pair) Alu silver 100 x 25,4 mm 110, Castor (pair) Alu silver 125 x 32 mm 110, Castor (pair) Alu black 125 x 32 mm 110,00 04 SEAT CUSHION Seat cushion 3 cm 0,00 Please select your desired colour in category 16 seat and back upholstery colours. Standard version In case you do not make another selection we will generally deliver the standard version. 123

6 EQUIPMENT AND CODES 05 DETERMINE THE SEAT HEIGHT REAR (RSH) Overall height Rear seat height Back he Axle position Frame length Seat cushion LSL gro clea On the wheelchair Vertical from ground to upper edge of seat frame tube Rear seat height, measured at the rear upper edge of the seat tube Remark: The adjustment of the rear seat height strongly depends on the size selection of the rear wheel. As a standard the difference front / rear should be 3 cm. This is a seat angle of 3. The optimal position of the rear wheel is factory-adjusted according to your selection. The elevation of the seat position by the CROSS wheel is marginal. 06 DETERMINE THE HORIZONTAL REAR WHEEL POSITION (CENTRE OF GRAVITY ADJUSTMENT) Type of driver Active Medium Passive Varioblock Short Code 766 Medium Code 767 Long Code 768-3,5 cm + 3,5 cm ** Axle position Position Distance* in mm *Measuring method: middle of back tube to middle of axle in mm **Picture shows Multiblock Code C 651 Rim profile 24" 07 C 695 Hollow rim 24" 07 C 752 Hollow rim 24" SILVERDESIGN ACTIVE wheel, black "Light" wheel, black 07 Article Article Article Article Article Article Article Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.

7 ORDER FORM 3 of 6 05 SEAT HEIGHT REAR (RSH) COMBINED WITH REAR WHEEL (WITHOUT SEAT CUSHION) Horizontal columns = seat heights in cm Vertical line = Ø rear wheel Please select your desired seat height through the combination of seat height and wheel size. The maximum admissible seat height differenz between front and rear seat height is amounts to 10 cm! Ø 24 x 1" 06 HORIZONTAL REAR WHEEL POSITION (CENTRE OF GRAVITY ADJUSTMENT) Measuring method: middle of back tube to middle of axle Varioblock Active Code 766 Medium Code 767 Passive Code 768 Position Selection 06 EXTENSION OF THE REAR WHEEL POSITION Multiblock for the extension of the rear wheel position by each 35 mm to the front or rear. Just in combination with Varioblock Code 767 and RSH 42, 44 and 46 cm. 50,00 ADAPTIV-ROLLSTÜHLE 07 REAR WHEELS COMBINED WITH SEAT HEIGHT CAT YES CODE DESCRIPTION Ø POUND SILVERDESIGN with radial spokes and large flange hub incl. quick-release axle 24" 0,00 (pair) Active wheel with radial spokes, large flange hub, hollow rim in black 24" 40,00 Recommended for more than 100 kg client weight or dynamic driving style! "Light" wheel incl. Speed Lite tyres and aluminium handrim, just in combination with 0,5 -wheel camber Code " 120,00 For Code 651 and 695 please select your handrim in category 08 and the tyres in category 09. As an option select Xtrends rear wheels incl. handrims and tyres instead of rear wheels Code 651, 695 or X-TRENDS REAR WHEELS CAT YES CODE ARTICLE DESCRIPTION Ø POUND Six-Star incl. 8 bar high pressure tyres and premium steel 24 x 1" 436,00 handrim Six-Star incl. 8 bar high pressure tyres and aluminium handrim 24 x 1" 436, Six-Star incl. 8 bar high pressure tyres and tetra handrim 24 x 1" 510, CROSS wheel incl. aluminium ring, coarse lug tyres and premium 24x1,75" 302,00 steel handrim Spinergy wheel incl. Marathon Plus Evolution and tetra handrim 24 x 1" 750, Spinergy wheel incl. Marathon Plus Evolution and titanium 24 x 1" 750,00 handrim Black Light incl. Marathon Plus Evolution and aluminium handrim 24 x 1" 436,00 These trendy wheels are supplied in pairs. Individual fitting of X-Trends wheels on request. Standard version In case you do not make another selection we will generally deliver the standard version. 125

8 EQUIPMENT AND CODES 07 C C C 447 0,5 Max. width = SW +17 cm 3 Max. width = SW +22 cm 08 C C C C C C mm 08 C mm OVERALL WIDTH IN MM WITH 15 MM HANDRIM SPACE Seat width ,5 wheel camber (mm) wheel camber (mm) folded, 0,5 wheel camber 300 folded, 3 wheel camber C C C C C C 595 Light Version 11 DETERMINE THE BACK UPHOLSTERY HEIGHT (BH) Back height Seat depth Se On the Wheelchair From the upper edge of the seat tube to the upper edge of the back upholstery. On the client The back support depends on the individual handicap. Remark: For clients who drive themselves the back height ends maximal two finger s widths under the shoulder blade tip. If the wheelchair is propelled with the arms the shoulder blade should be free and not be hindered by the back upholstery. A seat cushion reduces the real back height. 126 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.

9 ORDER FORM 4 of 6 07 REAR WHEEL OPTIONS 07 WHEEL CAMBER ,5 wheel camber (track adjustable) 0, wheel camber (track adjustable) 0,00 08 HANDRIMS AND HANDRIM OPTIONS (can not be combined with Xtrends wheels) CAT YES CODE DESCRIPTION Ø POUND Titanium, with 6 fixtures, just in combination for the Active wheel Code " 200, Premium steel high polished 24" 0, Aluminium 24" 0, Optigrip special handrim for tetraplegics 24" 150, Handrim coating made of silicone, smooth, black 24" 45, Handrim space 15 mm 24" 0, Handrim space 25 mm 24" 0,00 ADAPTIV-ROLLSTÜHLE 09 TYRES (can not be combined with Xtrends wheels) CAT YES CODE DESCRIPTION Ø POUND High pressure tyres 8 bar 24 x 1" 0, Pneumatic tyres with groove profile 24 x 1 3/8" 0, Solid puncture proof tyres 24 x 1" 0, Marathon Plus Evolution no flat tyres 24 x 1" 32,00 10 BRAKES Pressure brake for driver 0, "Light" pressure brake 0,00 11 BACK UPHOLSTERY HEIGHT (BH) CAT YES CODE BH DESCRIPTION POUND cm Back upholstery, adjustable tension with straps 0, cm Back upholstery, adjustable tension with straps 0, cm Back upholstery, adjustable tension with straps 0, cm Back upholstery, adjustable tension with straps 0, cm Back upholstery, adjustable tension with straps 0, cm Back upholstery, adjustable tension with straps Just in combination with push handles Code 410 0,00 Standard version In case you do not make another selection we will generally deliver the standard version. 127

10 EQUIPMENT AND CODES 12 C C C C C C C C Article Light Version The symbols illustrate the functions of each legrest. flip-up height adjustable angle adjustable 14 C C C C 315 Light Version Light Version 14 C Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.

11 ORDER FORM 5 of 6 12 BACKREST (STANDARD 90 TO THE SEAT) Back with push handle, 5 cm height adjustable 0, Back without push handle 0, Push handle, mounted on the back tube, stepless adjustable up to 15 cm 70,00 12 BACKREST OPTIONS Back, angle adjustable from the seat +/- 15 in 5 steps, adjustable later 150, Back angle factory-bent (fixed) ,00 13 SIDE GUARDS AND ARMRESTS Please note the marked functional features! 1 = securely screwed 2 = swing-up 3 = removable 4 = lockable 5 = armrest height adjustable 6 = covering the wheel CAT YES CODE DESCRIPTION POUND Aluminium side guard in frame colour with carbon fiber padding 65, "Light" side guard made of high strength magnesium alloy in 0,00 frame colour Aluminium side guard in frame colour with carbon fiber padding 195,00 incl. height adjustable armrest (screwed-on) Article Xtrends carbon fiber side guard (pair) 150,00 ADAPTIV-ROLLSTÜHLE 14 LEGRESTS AND FOOTRESTS flip-up height adjustable angle adjustable CAT YES CODE DESCRIPTION DEPTH LSL POUND "Light" footrest made of high strength magnesium alloy in frame 10 cm ,00 colour, flip-up, height and angle adjustable up to max. SW 46 cm Aluminium footrest in frame colour 10 cm ,00 flip-up, height and angle adjustable Aluminium footrest in frame colour 15 cm ,00 flip-up, height and angle adjustable "Light" footrest made of high strength magnesium alloy in frame colour, flip-up, height and angle adjustable, up to max. SW 46 cm 15 cm ,00 14 FOOTREST ACCESSORIES Calf strap 0,00 Required LSL cm (measured without seat cushion) Shank length factory-adjustment cm possible. Standard version In case you do not make another selection we will generally deliver the standard version. 129

12 EQUIPMENT AND CODES 15 C C C C C C C C C C C C C C C C C C C 712 / C C C C C Article C Article Article Article Article Article Article Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.

13 ORDER FORM 6 of 6 15 FRAME COLOURS CAT YES CODE DESCRIPTION YES CODE DESCRIPTION POUND Titanium grey 4023 Plain white 0, Red metallic 4922 Green metallic 0, Silver metallic 4923 Orange metallic 0, Blackstar 4925 Chrome silver 0, Matte black 4927 Pacific blue 0, Deep black 185 Cappuccino brown metallic 0, Brick red 0,00 Further frame colours can be selected on request at extra cost! For colours please see page BACK UPHOLSTERY COLOURS (SEAT UPHOLSTERY ALWAYS BLACK) Trevira (black) 0, Vented net material, black 30, Vented net material, red 30,00 17 WHEELCHAIR ACCESSORIES 17 HAND AND SPOKE GUARD (just in combination with SILVERDESIGN wheel Code 651) Transparent 60,00 17 ANTI-TIP-WHEELS Anti-tip-wheel, 1 pair, swing-away (recommended) Not in combination with step tube code , Anti-tip-wheel, swing-away, mounted left 79, Anti-tip-wheel, swing-away, mounted right, not in combination with step tube Code ,00 17 OTHER ACCESSORIES Step tube (1 piece), mounted right Not in combination with anti-tip-wheel code 691 and , Folding fixture 5,00 ADAPTIV-ROLLSTÜHLE Safety belt with lock 30, Crutch holder in combination with step tube 30, Passive lighting 7, Tyre pump 80, Accessory net 7,00 17 XTRENDS ACCESSORIES X-TREME backpack 35, BLACK WHEEL CASE for transporting the rear wheels 75, X-BEAM Gyro Twister 35, SILVER PEN 15, M spoke reflectors 20, Watch "Chronograph XR" in silver presentation box 75,00 Date Standard version In case you do not make another selection we will generally deliver the standard version. Signature 131

14 NOTES AND LAYOUT FOR FURTHER INFORMATION 132 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.