TECHNICAL DATABOOK. MITAS a.s. Prezzi consigliati al pubblico AGRICULTURAL AND INDUSTRIAL TYRES TECHNICAL DATABOOK AGRICULTURAL AND INDUSTRIAL TYRES

Transcription

1 MITAS a.s. TYRE DEALER / DISTRIBUTOR SPETS AGRO SHINA, LLC Sortuvalna st., 22, Darnitskiy district, Kiev, Ukraine, UA Tel: +38 (044) , Tel: +38 (066) , All Cultor tyres are produced by MITAS a.s. CGS / M:10/2015/I/M7 AGRICULTURAL AND INDUSTRIAL TYRES TECHNICAL DATABOOK AGRICULTURAL AND INDUSTRIAL TYRES TECHNICAL DATABOOK Prezzi consigliati al pubblico

2 INTRODUCTION The extensive technical data and other information relating to tyres and accessories on the following pages has been compiled to reflect as accurately and completely as possible the current state of development. Due to changes in our product range the tyre sizes given in this guide are not always identical to our available range. CGS HOLDING BRANDS, PRODUCTS AND SERVICES For more information, including addresses of our sales organizations, please visit Agricultural Tyres Motorcycle Tyres Truck Tyres EM, MPT & Industrial Tyres Bicycle Tyres & Tubes Aircraft Tyres Edition Agricultural Tyres Industrial Tyres Rubber Compounds Rubber Profiles Moulded Products Conveyor Belts Offset Printing Blankets Environmental Protection & Rescue Products Rubber Compounds Rubber Moulded Parts Sealing Elements Rubber-Coated Rollers Waterwalls V-Belts Rubber to Metal Products Air Springs and Power Elements Rubber Dams Ice Hockey Pucks Silicone Moulded Parts Silicone Hoses Silicone Profiles Chemical vessel rubber coating Curing moulds and testing 2 61

3 LIST OF CONTENTS List of tyre sizes Radial tractor tyres RD RD Conversion table tractor radial tyres Diagonal tyres Tractor diagonal Implement Traction Implement Non Traction Tractor Front EM, MPT and Industrial Use and Maintenance Liquid ballasting of tractor tyres , 56 Fitting and removal instructions Load index and Speed Category Sales organisations worldwide CGS holding

4 List of tyre sizes Inch Tyre size Alternative Tyre size Tread pattern Page Inch Tyre size Alternative Tyre size Tread pattern Page Tractor radial 24" 280/85 R 24 (11.2R24) /70 R 24 RD /85 R 24 (12.4R24) /85 R 24 (13.6R24) /70 R 24 RD /70 R 24 RD /85 R 24 (14.9R24) /65 R 24 RD /70 R 24 RD /85 R 24 (16.9R24) /65 R 24 RD /65 R 24 RD /65 R 24 RD " 280/85 R 28 (11.2R28) /85 R 28 (12.4R28) /85 R 28 (13.6R28) /70 R 28 RD /85 R 28 (14.9R28) /70 R 28 RD /85 R 28 (16.9R28) /65 R 28 RD /65 R 28 RD /70 R 28 RD /65 R 28 RD /65 R 28 RD " 380/85 R 30 (14.9R30) /85 R 30 (16.9R30) /85 R 30 (18.4R30) /70 R 30 RD /65 R 30 RD " 320/85 R 32 (12.4R32) 24 34" 380/85 R 34 (14.9R34) /85 R 34 (16.9R34) /85 R 34 (16.9R34) /85 R 34 (18.4R34) /70 R 34 RD /70 R 34 RD /65 R 34 RD /65 R 34 RD " 340/85 R 36 (13.6R36) 24 38" 340/85 R 38 (13.6R38) /80 R /85 R 38 (16.9R38) /85 R 38 (18.4R38) /70 R 38 RD /70 R 38 RD /85 R 38 (20.8R38) /65 R 38 RD /70 R 38 RD /65 R 38 RD /65 R 38 RD /65 R 38 RD /70 R 38 RD " 480/80 R /85 R 42 (20.8R42) /65 R 42 RD " 480/80 R " 480/80 R

5 Inch Tyre size Tread pattern Page Inch Tyre size Tread pattern Page Tractor diagonal 20" AS-Agri " AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri " AS-Agri AS-Agri AS-Agri AS-Agri " AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri " AS-Agri AS-Agri AS-Agri AS-Agri " AS-Agri AS-Agri AS-Agri " AS-Agri AS-Agri AS-Agri " AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri " AS-Agri AS-Agri AS-Agri AS-Agri AS-Agri

6 List of tyre sizes Inch Tyre size Tread pattern Page Inch Tyre size Tread pattern Page Implement 12" 10.0/80-12 AW-Impl /80-12 AW-Impl " AW-Impl " 10.0/ AS-Impl / AS-Impl / AW-Impl / AW-Impl / AS-Impl / AW-Impl / AW-Impl / AW-Impl " 400/ AW-Impl / AS-Impl " AW-Impl AW-Impl " 15.0/55-17 AS-Impl /50-17 AW-Impl " 12.0/75-18 AS-Impl /80-18 AW-Impl /65-18 AW-Impl /65-18 AW-Impl /80-18 AW-Impl " 500/ AS-Impl / AW-Impl / AS-Impl / AW-Impl " AW-Impl Tractor front 16" AS-Front AS-Front AS-Front AS-Front AS-Front AS-Front 08P AS-Front AS-Front AS-Front AS-Front AS-Front AS-Front AS-Front AS-Front " AS-Front " AS-Front AS-Front

7 Inch Tyre size Tread pattern Page EM, MPT and Industrial 16.5" SKID STEER SKID STEER SKID STEER SKID STEER SKID STEER SKID STEER " 10.5/80-18 SKID STEER /80-18 SKID STEER " INDUSTRIAL " MPT /70-20 AGRO-INDUSTRIAL /70-20 INDUSTRIAL " EARTHMOVER EARTHMOVER INDUSTRIAL L-24 INDUSTRIAL L-24 AGRO-INDUSTRIAL " INDUSTRIAL AGRO-INDUSTRIAL AGRO-INDUSTRIAL INDUSTRIAL " INDUSTRIAL INDUSTRIAL " INDUSTRIAL

8 8

9 RD-03 New generation of tractor tyre for gentle ground handling and higher load capacity Reduced soil compaction thanks to large ground contact area and optimal pressure distribution Up to 40% higher tension force compared with standard tyres High load capacity due to the wide design and the large volume of air Outstanding grip and tractive force ensure less slip and much lower fuel consuption Maximum speed of 65 km/h on roads, high driving comfort and easy handling 9

10 Tractor radial tyre 65 Series RD-03 TECHNICAL DATA Tyre size Service description LI/SS Rim (permitted) Section width Overall diameter Loaded static radius Rolling circumference Speed radius index 420/65 R D (129 A8) W 13 L W 12 W /65 R D (131 A8) W 14 L W 13 W /65 R D (136 A8) W 15 L W 14 L W /65 R D (143 A8) W 16 L W 18 L W 15 L /65 R D (134 A8) W 14L W 13 W /65 R D (139 A8) W 15 L W 14 L W /65 R D (145 A8) W 16 L W 18 L W 15 L /65 R D (150 A8) W 18 L DW 18 L W 16 L /65 R D (153 A8) W 16 L W 18 L W 15 L

11 RD-03 Tyre load capacity (kg) at tyre pressure (bar) Speed (km/h)

12 Tractor radial tyre 65 Series RD-03 TECHNICAL DATA Tyre size Service description LI/SS Rim (permitted) Section width Overall diameter Loaded static radius Rolling circumference Speed radius index 540/65 R D (148 A8) W 16 L W 18 L W 15 L /65 R D (154 A8) W 18 L DW 18 L W 16 L /65 R D (150 A8) W 16 L W 18 L W 15 L /65 R D (156 A8) W 18 L DW 18 L W 16 L /65 R D (160 A8) W 18 L DW 20 B /65 R D (169 A8) W 18 L DW 20 B /70 R D (169 A8) DW 23 B /65 R D (168 A8) DW 20 B DW 18L Load values given for 0.6 bar at 40 km/h are for calculating dual and triple load values only. 30 km/h (up to 40 km/h) load values also apply for low-speed high-torque field work. For plowing with single driven tyres in the furrow, a minimum inflation pressure of 0.8 bar is required. 12

13 RD-03 Tyre load capacity (kg) at tyre pressure (bar) Speed (km/h) For intensive road transport at 65/50/40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded. All load values are valid for ground slopes up to and including 20% (11 o ). When operating on slopes greater than 20%, please, contact the producer. Tubeless tyres may be used with a tube. 13

14 14

15 RD series tyres for high power in the field and comfort on the road Reduced ground compression thanks to a larger ground contact area Excellent transmission of power due to greater grip and traction High load capacity with stable and safe handling on the road Improved driving comfort due to flexible sidewalls Longer service life coupled with reduced fuel consumption for low operational costs 15

16 Tractor radial tyre 70 Series RD-02 TECHNICAL DATA Tyre size Service description LI/SS Rim (permitted) Section width Overall diameter Loaded static radius Rolling circumference Speed radius index 320/70 R 24 * 116A8 (116B) W 10 W 11 W /70 R 24 * 122A8 (122B) W 11 W 12 W /70 R A8 (125 B) W 12 W 13 W /70 R 24 * 130A8 (130B) W 13 W 14 L W /70 R A8 (127 B) W 12 W 13 W /70 R A8 (133 B) W 13 W 14 L W /70 R A8 (140 B) W 15 L W 16 L W 14 L /70 R A8 (141 B) W 15 L W 16 L W 14 L /70 R A8 (143 B) W 15 L W 16 L W 14 L /70 R 34 * 148A8 (148B) W 16 L W 18 L W 15 L

17 RD 02 Tyre load capacity (kg) at tyre pressure (bar) Speed (km/h)

18 Tractor radial tyre 70 Series RD-02 TECHNICAL DATA Tyre size Service description LI/SS Rim (permitted) Section width Overall diameter Loaded static radius Rolling circumference Speed radius index 480/70 R A8 (145 B) W 15 L W 16 L W 14 L /70 R A8 (150 B) W 16 L W 18 L W 15 L /70 R 38 * 155A8 (155B) W 18 L * Calculated / In preparation 30 km/h (up to 40 km/h) load values also apply for low-speed high-torque field work. For plowing with single driven tyres in the furrow, a minimum inflation pressure of 0.8 bar is required. For intensive road transport at 50/40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded. All load values are valid for ground slopes up to and including 20% (11 o ). When operating on slopes greater than 20%, please, contact the producer. Tubeless tyres may be used with a tube. 18

19 RD 02 Tyre load capacity (kg) at tyre pressure (bar) Speed (km/h)

20 20

21 All-round standard tyres for a wide range of applications Balanced combination of features for various agricultural applications Very good grip and traction with much less slip Long service life thanks to the wear-resistant tread compound Large ground contact patch and lower operating pressure for less soil compaction 21

22 Tractor radial tyre 85 Series TECHNICAL DATA Tyre size Service description LI/SS Rim (permitted) Section width Overall diameter Loaded static radius Rolling circumference Speed radius index 280/85 R 24 (11.2R24) 115A8 (112B) W 9 W /85 R 24 (12.4R24) 122A8 (119B) W 11 W 9 W /85 R 24 (13.6R24) 125A8 (122B) W 12 W /85 R 24 (14.9R24) 131A8 (128B) W 12 W 13 W /85 R 24 (16.9R24) 137A8 (137B) W 15 W 14 W /85 R 28 (11.2R28) 118A8 (115B) W 9 W /85 R 28 (12.4R28) 124A8 (121B) W 11 W 10 W /85 R 28 (13.6R28) 127A8 (124B) W 12 W /85 R 28 (14.9R28) 133A8 (130B) W 12 W 13 W /85 R 28 (16.9R28) 139A8 (136B) W 15 W 14 W

23 RD 01 Tyre load capacity (kg) at tyre pressure (bar) Speed (km/h)

24 Tractor radial tyre 85 Series TECHNICAL DATA Tyre size Service description LI/SS Rim (permitted) Section width Overall diameter Loaded static radius Rolling circumference Speed radius index 380/85 R 30 (14.9R30) 135A8 (135B) W 12 W 13 W /85 R 30 (16.9R30) 140A8 (137B) W 15 W 14 W /85 R 30 (18.4R30) 145A8 (142B) W 16 W 15 W /85 R 32 (12.4R32) 142A8 (142B) W 9 W 11 W /85 R 34 * (14.9R34) 146A8 (143B) W 12 W 13 W /85 R 34 (16.9R34) 142A8 (139B) W 15 W 14 W /85 R 34 * (16.9R34) 147A8 (144B) W 15 W 14 W /85 R 34 (18.4R34) 147A8 (144B) W 16 W 15 W /85 R 36 (13.6R36) 132A8 (129B) W 12 W /85 R 38 (13.6R38) 133A8 (133B) W 12 W

25 RD 01 Tyre load capacity (kg) at tyre pressure (bar) Speed (km/h)

26 Tractor radial tyre 85 Series TECHNICAL DATA Tyre size Service description LI/SS Rim (permitted) Section width Overall diameter Loaded static radius Rolling circumference Speed radius index 380/80 R 38 * 142 A8 (142B) W 12 W 11 W /85 R 38 (16.9R38) 144A8 (141B) W 15 W 14 W /85 R 38 (18.4R38) 149A8 (146B) W 16 W 15 W /85 R 38 (20.8R38) 155A8 (152B) W 16 W /80 R 42 * 151A8 (151B) W 16 W 15 W /85 R 42 (20.8R42) 162A8 (162B) W 16 W /80 R 46 * 158A8 (158B) W 16 W 15 W /80 R 50 * 159 A8 (159B) W 16 W 15 W * Calculated / In preparation 30 km/h (up to 40 km/h) load values also apply for low-speed high-torque field work. For plowing with single driven tyres in the furrow, a minimum inflation pressure of 0.8 bar is required. For intensive road transport at 50/40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded. All load values are valid for ground slopes up to and including 20% (11 o ). When operating on slopes greater than 20%, please, contact the producer. Tubeless tyres may be used with a tube. 26

27 RD 01 Tyre load capacity (kg) at tyre pressure (bar) Speed (km/h)

28 Conversion table Ø rim Standard inch Designation in milimetres 85 Series 80 Series 24" 11.2 R R R R R 24 28" 11.2 R R R R R 28 30" 14.9 R R R 30 32" 12.4 R 32 34" 14.9 R R R 34 36" 13.6 R 36 38" 13.6 R R R R 38 42" 20.8 R 42 50" 280/85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /85 R /80 R /80 R /80 R /80 R 50 28

29 Designation in milimetres 70 Series 65 Series Standard inch Speed radius index 320/70 R 24 RD /70 R 24 RD /70 R 24 RD /70 R 24 RD /70 R 28 RD /70 R 28 RD /70 R 28 RD /70 R 28 RD /70 R 30 RD /70 R 34 RD /70 R 34 RD /70 R 38 RD /70 R 38 RD /70 R 38 RD /70 R 38 RD /65 R /65 R 24 RD /65 R 24 RD /65 R 24 RD /65 R 28 RD /65 R 28 RD /65 R 28 RD /65 R 28 RD /65 R 30 RD /65 R 28 RD /65 R 34 RD /65 R 34 RD /65 R 38 RD /65 R 38 RD /65 R 38 RD /65 R 42 RD R R R R R R R R R R R R R R R R R R R R R R R

30 AS-Agri 06 AS-Agri 07 AS-Agri 08 AS-Agri 13 AS-Agri 15 AS-Agri 19 30

31 AS-Agri 10 AS-Agri Standard cross-ply tyres for all applications Excellent traction by high lugs High mileage by use of low-wear tread compound Good self-cleaning ability by smooth inter-lug surfaces Safe handling on hilly or sloping ground AS-Agri 20 31

32 Tractor diagonal tyres AS-Agri TECHNICAL DATA Tyre size Tread pattern Ply rating (PR) TT/TL Rim (permitted) Tube Section width Overall diameter AS-Agri 06 8 TT W AS-Agri 13 6 TT W7 (W6) / AS-Agri 10 8 TT W8 (W7) / AS-Agri 19 8 TT W8 (W7) / AS-Agri 10 6 TL W10 (W9) AS-Agri 19 6 TL W10 (W9) AS-Agri 10 8 TT W10 (W9) 9.5/ AS-Agri 19 8 TT W10 (W9) 9.5/ AS-Agri 06 8 TL W11 (W9; W10) AS-Agri 06 8 TT W11 (W9; W10) 12.4/ AS-Agri 19 8 TL W11 (W9; W10) AS-Agri 19 8 TT W11 (W9; W10) 12.4/ AS-Agri TT W11 (W9; W10) 12.4/ AS-Agri TT W11 (W9; W10) 12.4/ AS-Agri 13 8 TT W12 (W11) AS-Agri 08 4 TL W13 (W11; W12) AS-Agri 19 8 TL W13 (W11; W12) AS-Agri 19 8 TT W13 (W11; W12) AS-Agri 13 8 TT W15L (W14L) AS-Agri 10 8 TT W AS-Agri TT W

33 AS-Agri 06 AS-Agri 07 AS-Agri 08 AS-Agri 10 AS-Agri 13 AS-Agri 15 AS-Agri 19 AS-Agri 20 Loaded static radius Rolling circumference ± 1.0 % Tyre load capacity (kg) Speed (km/h) Tyre pressure (bar)

34 Tractor diagonal tyres AS-Agri TECHNICAL DATA Tyre size Tread pattern Ply rating (PR) TT/TL Rim (permitted) Tube Section width Overall diameter AS-Agri TL W16L (W15L) AS-Agri TL DW AS-Agri TL DW AS-Agri TT DW AS-Agri 10 8 TT W7 (W6) AS-Agri 10 8 TT W10 (W9) 11.2/12.4/ AS-Agri 19 8 TT W10 (W9) 11.2/12.4/ AS-Agri 19 8 TT W11 (W9; W10) 11.2/12.4/ AS-Agri 20 8 TT W11 (W9; W10) 11.2/12.4/ AS-Agri TT W11 (W9; W10) 11.2/12.4/ AS-Agri 19 8 TT W12 (W11) 11.2/12.4/ AS-Agri 19 8 TT W13 (W11; W12) 14.9/ AS-Agri 20 8 TT W13 (W11; W12) 14.9/ AS-Agri TT W15L (W14L) 14.9/ AS-Agri TL W15L (W14L) AS-Agri TT W15L (W14L) 14.9/ AS-Agri 10 6 TT W AS-Agri TL W AS-Agri 13 8 TT W15L (W14L) 14.9/ AS-Agri TT W15L (W14L) 14.9/ AS-Agri 13 8 TT W16L (W15L)

35 AS-Agri 06 AS-Agri 07 AS-Agri 08 AS-Agri 10 AS-Agri 13 AS-Agri 15 AS-Agri 19 AS-Agri 20 Loaded static radius Rolling circumference ± 1.0 % Tyre load capacity (kg) Speed (km/h) Tyre pressure (bar)

36 Tractor diagonal tyres AS-Agri TECHNICAL DATA Tyre size Tread pattern Ply rating (PR) TT/TL Rim (permitted) Tube Section width Overall diameter AS-Agri TT W16L (W15L) AS-Agri 10 6 TT W7 (W6) AS-Agri 13 6 TT W8 (W7) AS-Agri 13 6 TT W11 (W9; W10) AS-Agri 10 8 TT W15L (W14L) AS-Agri 19 8 TT W16L (W15L) / AS-Agri TT W16L (W15L) / AS-Agri TT W16L (W15L) / AS-Agri 10 6 TT W7 (W6) AS-Agri 10 6 TT W8 (W7) AS-Agri TT W8 (W7) AS-Agri 13 6 TT W11 (W10) AS-Agri 10 6 TT W12 (W11) 12.4/ AS-Agri 13 6 TT W12 (W11) 12.4/ AS-Agri 13 8 TT W AS-Agri 15 6 TT W13 (W12) AS-Agri 15 8 TT W14L AS-Agri 13 8 TT W15L (W14L) AS-Agri TT W16L (W15L) AS-Agri TT W16L (W15L) km/h (up to 40 km/h) load values also apply for low-speed high-torque field work. For intensive road transport at 40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded. For harvesting machines and front-end loader tractor application the Inflation Pressure must be increased by 0.4 bar. All load values are valid for ground slopes up to and including 20 % (11 ). When operating on slopes greater than 20 %, contact the producer. TL = Tubeless TT = Tube Type 36

37 AS-Agri 06 AS-Agri 07 AS-Agri 08 AS-Agri 10 AS-Agri 13 AS-Agri 15 AS-Agri 19 AS-Agri 20 Loaded static radius Rolling circumference ± 1.0 % Tyre load capacity (kg) Speed (km/h) Tyre pressure (bar)

38 AS-Impl 01 AS-Impl 02 AS-Impl 03 AS-Impl 08 38

39 AS-Impl Implement cross-ply tyres suitable above all for use on driving axles and self-propelled machinery Cultor implement tyres are designed for their specific main application. All profiles unify the following benefits: Long service life through low-wear tread compound High puncture resistance by optimised construction 39

40 Implement traction AS-Impl TECHNICAL DATA Tyre size Tread pattern Ply rating (PR) TT/TL Rim Section width Overall diameter Loaded static radius 10.0/ AS-Impl TL 9.00x / AS-Impl TL 9.00x / AS-Impl TL 9.00x / AS-Impl TL 13.00x /55-17 AS-Impl TL 13.00x /75-18 AS-Impl TL W 9x / AS-Impl TL 16.00x / AS-Impl TL 16.00x For a non-standard version, please contact a producer. These tyres are for normal agricultural use and not for continuous highway service. TL = Tubeless TT = Tube Type 40

41 AS-Impl 01 AS-Impl 02 AS-Impl 03 AS-Impl 08 Rolling circumference ± 1.0 % Tyre load capacity (kg) drive wheel / free rolling axle Speed (km/h) Tyre pressure (bar) / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

42 AW-Impl 03 AW-Impl 04 AW-Impl 07 AW-Impl 09 AW-Impl 11 AW-Impl 12 42

43 AW-Impl Implement tyres for free rolling application Application determines profile. AW-Impl 03/04/07: ribbed profiles for good road holding and long service life AW-Impl 09: flotation tyre with high load capacity at low tyre pressure, a mixture of rolling rib profile and strong side lugs for good track holding AW-Impl 13 43

44 Implement non traction AW-Impl TECHNICAL DATA Tyre size Tread pattern Ply rating (PR) TT/TL Rim Tube Section width Overall diameter Loaded static radius 10.0/80-12 AW-Impl TL 9.00x /80-12 AW-Impl TT 9.00x / AW-Impl TT 6.50x / AW-Impl TT 9.00x / / AW-Impl TL 9.00x / AW-Impl TL 9.00x / AW-Impl TT 9.00x / / AW-Impl TL 9.00x / AW-Impl TL 13.00x AW-Impl TT 5.50x AW-Impl TT 5.50x /50-17 AW-Impl TL 16.00x /80-18 AW-Impl TL 11x HS /65-18 AW-Impl TL 11x / /65-18 AW-Impl TT 11x / /65-18 AW-Impl TL 11x /80-18 AW-Impl TL 11x / / AW-Impl TL 16.00x / AW-Impl TL 16.00x AW-Impl TT 8x For a non-standard version, please contact a producer. These tyres are for normal agricultural use and not for continuous highway service. TL = Tubeless TT = Tube Type 44

45 AW-Impl 03 AW-Impl 04 AW-Impl 07 AW-Impl 09 AW-Impl 11 AW-Impl 12 AW-Impl 13 Rolling circumference ± 1.0 % Tyre load capacity (kg) Speed (km/h) Tyre pressure (bar)

46 AS-Front 04 AS-Front 06 AS-Front 07 AS-Front 08P AS-Front 09 AS-Front 10 46

47 AS-Front 08 AS-Front Cross-ply steering tyres Cultor front tyres are suitable for free rolling steering axles. Ribbed tread pattern with high positive tread part ensure safe road use and good track holding. The traction profile of AS-Front 13 is also suitable for driving axles. AS-Front 13 47

48 Tractor front tyre AS-Front TECHNICAL DATA Tyre size Tread pattern Ply rating (PR) TT/TL Rim Tube Section width Overall diameter AS-Front 04 6 TT 4.00Ex AS-Front 06 6 TT 4.00Ex AS-Front 04 8 TT 4.50Ex AS-Front 06 8 TT 4.50Ex AS-Front 07 8 TT 4.50Ex AS-Front 08P 8 TT 4.50Ex AS-Front 09 8 TT 4.50Ex AS-Front 13 8 TT 4.50Ex AS-Front 08 8 TT 4.50Ex AS-Front 06 8 TT 5.50Fx AS-Front 08 8 TT 5.50Fx AS-Front 10 8 TT 5.50Fx AS-Front 10 8 TL 5.50Fx AS-Front 13 8 TT 5.50Fx AS-Front 10 8 TL 8x AS-Front 10 8 TT 4.50Ex AS-Front 08 8 TT 5.50Fx AS-Front 10 8 TL 5.50Fx For a non-standard version, please contact a producer. These tyres are for normal agricultural use and not for continuous highway service. TL = Tubeless TT = Tube Type 48

49 AS-Front 04 AS-Front 06 AS-Front 07 AS-Front 08 AS-Front 08P AS-Front 09 AS-Front 10 AS-Front 13 Loaded static radius Rolling circumference ± 1.0 % Tyre load capacity (kg) Speed (km/h) Tyre pressure (bar)

50 Agro Industrial 10 Agro Industrial 20 Skid Steer 20 Industrial 20 Industrial 30 Industrial 40 50

51 AGRO-INDUSTRIAL EARTHMOVER INDUSTRIAL MPT SKID STEER Skid Steer 30 Skid Steer 50 Industrial 10 Industrial 50 MPT 30 Earthmover 10 Earthmover 20 51

52 EM, MPT and Industrial AGRO-INDUSTRIAL, EARTHMOVER, INDUSTRIAL, MPT and SKID STEER Agro Industrial 10 Agro Industrial 20 Skid Steer 20 Skid Steer 30 Skid Steer 50 TECHNICAL DATA Tyre size Tread pattern Ply rating (PR) Service description LI/SS TT/TL Rim Tube SKID STEER 20 8 PR 124 A2 TL 8.25x SKID STEER 30 8 PR 131 A3 TL 8.25x SKID STEER PR 135 A3 TL 8.25x SKID STEER PR 131 A2 TL 9.75x SKID STEER PR 144 A3 TL 9.75x SKID STEER PR 144 A3 TL 9.75x /80-18 SKID STEER PR 127 A8/115 A8 * TL 9x /80-18 SKID STEER PR 141 A8/128 A8 * TL 9x INDUSTRIAL 10 6 PR 130 A6 TL 11.75x MPT PR 132 G TT 11x /70-20 AGRO-INDUSTRIAL PR 142 A8 TL 14.00x /70-20 INDUSTRIAL PR 142 A8 TL 14.00x EARTHMOVER PR 172 A2 TL 9.00x EARTHMOVER PR 175 A2 TL 9.00x INDUSTRIAL PR 149 A6 TL W15Lx L - 24 INDUSTRIAL PR 146 A8 TL W15Lx L - 24 AGRO-INDUSTRIAL PR 146 A8 TL W15Lx INDUSTRIAL PR 156 A8 TL W16Lx AGRO-INDUSTRIAL PR 142 A8 TL W16Lx AGRO-INDUSTRIAL PR 145 A8 TL W16Lx INDUSTRIAL PR 149 A8 TL DW20x INDUSTRIAL PR 151 A8 TL W15Lx INDUSTRIAL PR 151 A6 TL W15Lx INDUSTRIAL PR 154 A8 TL W15Lx30 - TL = Tubeless Tyre TT = Tube Tyre * free rolling / drive wheels 52

53 Industrial 10 Industrial 20 Industrial 30 Industrial 40 Industrial 50 MPT 30 Earthmover 10 Earthmover 20 Section width Overall diameter Loaded static radius Rolling circumference ± 1.0 % Tyre pressure (bar) Tyre load capacity (kg) Speed (km/h) /1 215 * /1 800 *

54 USE AND MAINTENANCE STORAGE > Keep the tyres clean and away from heat, light, ozone or hydrocarbon sources. > Avoid prolonged exposure of the tyres to direct sunlight. > Avoid any contact with grease, petrol, volatile solvents or other substances that may deteriorate the rubber. > Avoid horizontal storage for tubeless tyres, only small size tyres may be stacked or stored flat (maximum 6 months). > When tyres are stored flat (horizontal), the position must be lug against lug. > Reduce inflation pressure when tyres are stored fitted on rims. > Ensure there is no water or moisture inside the tyre. > Never store tyres directly in contact with the ground for long periods. TYRE REPAIRS > For safety reasons, repairs should only be carried out by specialists using the correct tools. PROPER USE OF TYRES > When loading tyres you have to consider the correlation between speed, inflation pressure and load capacity. > Overloading results in premature tyre failure. Use the technical documentation and inflation tables which show the load and pressure figures for different operating speeds. > Underinflation results not only in incorrect tread wear but also in ply separation and eventually further damage to the ply. > Overinflation makes the tyre stiff and decreases its resistance against hits, leading to ply tear. OIL kg Check inflation pressure regularly Avoid contact with grease, oil and other chemicals Inspect tyres for damage and irregularities Observe tyre and vehicle load limits Read safety and maintenance recommendations Use only authorised repair LIQUID BALLASTING OF TRACTOR TYRES In some cases, it is necessary to add weight to tyres to increase traction power. Filling the tyre with a liquid (water) is a simple and inexpensive way. It is possible to add liquid to the tyres up to 75% of their volume. In winter, to avoid the water damaging the tyres when it freezes, suitable quantities of anti-freeze must be added. INSTRUCTIONS FOR ADDING LIQUID 1. Jack the wheel up and position the valve at the highest vertical point. 2. Unscrew the removable valve body from the valve and connect a combined air-water fill and draining valve to the valve chunk. Air can be removed from the tyre through this valve while the water is entering. 3. Introduce the water or anti-freeze mixture into the tyre. Stop filling when liquid starts to issue from the valve. The quantity of liquid added will be about 75 %. Do not over-fill! 4. Replace the valve body and inflate the tyre to the recommended operating pressure. 5. Clean all metal parts anti-freeze solution is corrosive. INSTRUCTIONS FOR DRAINING LIQUID 1. Jack the wheel up and position the valve at the lowest vertical point. 2. Unscrew the valve core and let the water drain out. 3. Attach a small rubber hose of suitable length to the locking washer and insert the hose into the tyre tube, then screw the washer down over the stem of the valve. 4. Inflate the tyre with air. 5. Remove the internal valve stem and let the remaining water drain from the tyre. 6. Remove the rubber hose and reassemble the valve. Inflate with air up to the recommended pressure. ANTI-FREEZE SOLUTION > As protection against frost, it is recommended to add Calcium Chloride (CaCl 2 ). If a tubeless tyre is mounted, we recommend that the rim should be treated against corrosion or an inner tube must be used. > Remember prepare the solution by pouring the Calcium Chloride into the water, stirring to help it dissolve. Never pour water on to Calcium Chloride, it is dangerous. CaCl 2 per litre of water Protection to 200 g 10 C 250 g 15 C 300 g 20 C 350 g 25 C 400 g 30 C 25 % 75 % 54

55 FITTING AND REMOVAL INSTRUCTIONS Demounting and mounting procedures can be dangerous, and should be performed only by trained and qualified staff, using proper tools and procedures. Failure to comply with these procedures may result in faulty positioning of the tyre on the rim, and cause the tyre to burst with explosive force leading to serious physical injury or death. STORAGE 1. Make sure that the rim, the tyre and the tube are compatible. 2. Check that the tyre is suitable for the machine. Use only rims recommended or permitted by the tyre manufacturer. 3. Always use the proper specialised equipment and tools. 4. The rim must be clean and in perfect condition (no damage, etc.). If necessary, clean the rim thoroughly with a wire brush. Never fit a tyre onto a rim that shows cracks, significant distortion, evidence of welded repair, etc. 5. Thoroughly inspect the inside as well as the outside of the tyre in order to identify any damage which may be present. If the damage is considered to be beyond repair, the tyre should be scrapped. 6. If fitting with a tube, always use the correct new tube and flap for the tyre size. For fitting tubeless tyres without tubes, on tubeless rims, always use a new tubeless valve. 7. Before fitting, lubricate the rim and the beads. Use only a suitable lubricant that will not damage the tyre (never use silicone or petroleum-based products). 8. We recommend vertical fitting. In case of horizontal fitting it is impossible to see if the lower bead is correctly seated. 9. Fit the tyre on the rim diametrically opposite to the valve hole (respect, if present, the rotation direction indicated by the arrows). With the help of a suitable lever and closely repeated applications, get the first bead over the rim flange. Then pose the lightly inflated talc coated tube (if fitted) inside the tyre. Locate the valve, fitting the ferrule loosely. Fit the second bead, lever it progressively over the rim flange, finish at the valve. 10. For seating the beads and centring of the tyre, remove the valve core. Slowly inflate to ensure correct seating of the beads. Ensure that the beads do not pinch the tube. 11. During tyre inflation keep at a safe distance and always use a safety cage. If possible, fasten the tyre to the wall or use retaining chains. During pressure readings ensure that no part of the body is within the possible trajectory of the valve mechanism or of the caps. It is recommended to use suitable pressure limitation gauges. Use a filter and dehumidifier on the compressed air line to avoid introducing humidity or dirt. Never use a hammer to make a tyre bead seat by hitting it. 12. Continue inflation. Make sure that you do not inflate beyond 2.5 bar if the beads are not well seated and centred on the wheel. 13. If the beads are not correctly seated, deflate, lubricate and inflate again. Repeat these operations until the beads are correctly seated. 14. When all the previous operations have been correctly done refit the valve core. Set the pressure according to the load see tables in technical databook. 15. Make sure the valves do not touch the rims, the brake drums or other fixed mechanical parts. REMOVING > Never try to unseat the beads of an inflated tyre. > Always remove the valve core. > Let the tyre deflate, check before unseating that the tyre is completely deflated. Never use tools that could damage the rims or the beads of the tyre. 55

56 BALLASTING OF TRACTOR TYRES Quantity when approx. 75 % full Tyre size Alternative Radial tyres Tyre size Tread pattern Liquid (l) 280/85 R 24 (11.2R24) /70 R 24 RD /70 R 24 Radial /85 R 24 (12.4R24) /85 R 24 (13.6R24) /70 R 24 RD /70 R 24 Radial /70 R 24 RD /85 R 24 (14.9R24) /65 R 24 RD /70 R 24 RD /70 R 24 Radial /85 R 24 (16.9R24) /65 R 24 RD /65 R 24 RD /65 R 24 RD /85 R 28 (11.2R28) /85 R 28 (12.4R28) /85 R 28 (13.6R28) /70 R 28 RD /85 R 28 (14.9R28) /70 R 28 RD /85 R 28 (16.9R28) /65 R 28 RD /65 R 28 RD /70 R 28 RD /65 R 28 RD /65 R 28 RD /85 R 30 (14.9R30) /85 R 30 (16.9R30) /85 R 30 (18.4R30) /70 R 30 RD /65 R 30 RD /85 R 32 (12.4R32) /85 R 34 (14.9R34) 240 Quantity when approx. 75 % full Tyre size Alternative Radial tyres Tyre size Tread pattern Liquid (l) 380/85 R 34 (14.9R34) Radial /85 R 34 (16.9R34) /85 R 34 (18.4R34) /70 R 34 RD /70 R 34 RD /70 R 34 Radial /65 R 34 RD /65 R 34 RD /85 R 36 (13.6R36) /85 R 38 (13.6R38) /80 R /85 R 38 (16.9R38) /85 R 38 (18.4R38) /70 R 38 RD /70 R 38 RD /85 R 38 (20.8R38) /65 R 38 RD /70 R 38 RD /70 R 38 Radial /65 R 38 RD /65 R 38 RD /70 R 38 RD /80 R /80 R 42 Radial /85 R 42 (20.8R42) /65 R 42 RD /80 R /80 R 46 Radial /80 R Quantity when approx. 75 % full Tyre size Diagonal tyres litres (kg)

57 LOAD INDEX LI kg lbs LI kg lbs LI kg lbs SPEED CATEGORY Speed Symbol A1 A2 A3 A4 A5 A6 A7 A8 B D E F G J K Speed (km/h) Speed (mph) PRESSURE UNITS CONVERSION TABLE bar kpa p.s.i