MECHANICS CATALOGUE DRIVELINE. branches driveline driveline.com.au

Size: px
Start display at page:

Download "MECHANICS CATALOGUE DRIVELINE. branches driveline driveline.com.au"

Transcription

1 DRIVELINE S E R V I C E S A U S T R A L I A the underbody & power transmission specialists P (07) F (07) E sales@driveline.com.au W driveline.com.au ABN CATALOGUE branches brisbane south brisbane north dubbo gold coast mackay melbourne newcastle north melbourne perth townsville version driveline driveline.com.au

2 CATALOGUE PAGE:- 1 GENERAL DIMENSIONAL DATA. D2 D3 D3 D2 X L D1 Series X D2 x D3 (mm x mm) K L D1 (drilled) D1 (threaded) 2C x /16-24 (9.65) (79.35) (13.2) (8.64) 3C 0.38 (9.65) x (90.47) 0.61 (15.5) 0.34 (8.64) 5/ C x /16-24 (9.65) (107.92) (15.5) (8.64) 5C 0.56 (14.2) x (115.06) 0.69 (17.5) 0.41 (10.4) 3/8-24 6C 0.56 (14.2) x (140.46) 0.69 (17.5) 0.41 (10.4) 3/8-24 7C x /16-20 (16.0) (148.38) (20.6) (13.5) 8C 0.63 (16.0) x (206.32) 0.81 (20.6) 0.53 (13.5) 1/ C 0.63 (16.0) x (165.07) 1.00 (25.4) 0.53 (13.5) 1/2 20 9C x /2-20 (16.0) (209.52) (25.4) (13.5) 10C 1.00 (25.4) x (212.70) 1.28 (32.5) 0.66 (17.0) 5/ C x /4-16 (25.4) (222.25) (40.1) (20.0) 12C 1.00 (25.4) 92.2 x (288.90) 1.28 (32.5) 0.57 (14.5) 14C 1.13 (28.6) x (338.80) 1.93 (49) 0.72 (18.5) 15C x /4-16 (31.8) (259.95) (38.1) (20.0) Complete range of Mechanics Universal Joints available including Lube for Life design.

3 CATALOGUE PAGE:- 2 FLANGE YOKES Spigot Bolt PCD F/C K D D2 D3 L Part No. Notes SERIES: 17R Suits U/J RUJ x (M) R.2.423C Toyota (46.0) (77.8) (55.0) (55.0) (40.0) USE (M) R.2.431C Mazda (45.0) (89.1) (63.0) (63.0) (43.1) USE (M) R.2.439C Mazda (45.0) (84.8) (60.0) (60.0) (43.0) USE (M) R Escort (56.0) (89.7) (60.0) (67.0) (41.1) USE K (M) R Bolt pattern (57.2) (69.9) (44.8) (53.5) (38.0) USE SERIES: 21R Suits U/J RUJ x (M) S Mazda & C.Bearing End (45.0) (96.0) (68.0) (68.0) (40.0) 1.77 (M) S Mazda & Diff End * (45.0) (104.3) (74.0) (74.0) (40.0) USE (M) R Late Commodore (57.2) (77.8) (38.3) (67.7) (38.0) 2.37 (M) R Holden (60.3) (79.5) (50.8) (60.7) (38.0) USE (M) S Mazda (45.0) (88.9) (63.0) (63.0) (40.0) SERIES: 3R Suits U/J x (F) R Double Cardan Flange Yoke (79.4) (108.0) (76.2) (76.2) (43.2) Suits Double Cardan

4 CATALOGUE PAGE:- 3 L L1 O S AUTOMOTIVE SLIP YOKES Spline C/EOS LTH Hub S L L1 O Part No. Application SERIES: 17R Suits U/J RUJ x x R Early Model Ford Escort Aust. Prod. (22.28 x 16) (140.5) (115.1) (30.2) USE (1140) x R B Most Datsuns with small engine (20.50 x 18) (122.2) (96.7) (29.9) x R Toyota (27.96 x 21) (145.2) (115.1) (37.8) USE X (1210) x R Toyota T18 and other models (25.34 x 22) (142.0) (116.6) (32.0) 1.00 x R Mazda Rotary / Piston - 84 (25.40 x 22) (150.0) (119.9) (35.1) USE X (1210) x R Datsun 1600 Aust Production (25.50 x 24) (148.4) (118.3) (35.1) USE X (1210) x R Commodore VK 5 Speed (26.92 x 24) (132.0) (104.9) (35.8) x R Escort, Capri (28.27 x 25) (140.5) (111.8) (35.1) USE K (1300) x R Holden Various (30.23 x 27) (132.1) (105.2) (38.1) USE (1210) Commodore VK.899 x R Toyota Corolla T18 (22.83 x 20) (142.0) (116.6) (32.0) SERIES: 2R Suits U/J RUJ2030 or (greaseable) x x R Toyota 5 Speed (27.96 x 21) (155.6) (126.2) (37.9) USE X (1310) x 26 2R Nissan/Commodore VL Auto (28.52 x 26) USE X (1310) x 27 2R VK/VL 253 V8 (30.23 x 27) Use X & RUJ x R Nissan 300ZX (32.0 x 30) (155.0) (125.00) (42.0) USE X (1310) Commodore VL Turbo Manual

5 CATALOGUE PAGE:- 4 L L1 O S AUTOMOTIVE SLIP YOKES Spline C/EOS LTH Hub S L L1 O Part No. Application SERIES: 21R Suits U/J RUJ x x R Toyota 5 Speed (27.96 x 21) (154.0) (124.0) (37.9) USE X (1310) x S Mazda & Courier (25.40 x 22) (145.0) (117.0) (34.9) USE (1310) x R Nissan (25.50 x 24) (156.0) (115.0) (34.9) USE X (1310) x S Mazda E2200 V6-929 (28.27 x 25) (152.0) (123.0) (37.9) USE (1310) Mazda late models x R Nissan Skyline VL Commodore Auto (28.50 x 26) (155.0) (127.0) (37.9) USE X (1310) x R Commodore VN Auto / Skyline Auto (30.23 x 27) (155.0) (126.0) (38.1) USE X (1310) T x R Commodore / Skyline T350 (30.23 x 27) (155.0) (126.0) (38.1) With Speedo drive x R Ford C4,Top Loader,Comm 5spd (30.98 x 28) (155.0) (126.0) (38.1) USE X (1310) Commodore VN Manual x 30 21R (32.61 x 30) USE X (1310) x S Chrysler Valiant Torque Flight (33.53 x 30) (203.5) (175.0) (42.8) USE X (1310) SERIES: 25R Suits U/J RUJ x x R Holden 1 Tonne (not T400) (30.23 x 27) (149.2) (116.7) (38.1) USE X (1310) x R Holden 350 V8 Auto (35.48 x 32) (182.3) (148.2) (47.8) USE X (1310) Turbo 400 SERIES: 3R Suits U/J x x R X Holden (30.23 x 27) (140.0) (123.2) (38.1) x R X Turbo 400 (35.48 x 32) (193.0) (17.0) (47.8) SERIES: 7290 Suits U/J x x X Chrysler Series: 21R: U/J (33.32 x 30) Series 3R: U/J , 1330 U/J Series 1310: U/J

6 CATALOGUE PAGE:- 5 AUTOMOTIVE WELD Tube Butt W/C Size B L Part No. Notes YOKES SERIES: 17R Suits U/J RUJ x x R (57.2 x 1.65) (54.1) (42.5) 2.50x R (63.5 x 1.65) (60.5) (41.0) USE (1210) 2.75x R (69.9 x 1.65) (66.8) (31.2) USE (1210) 3.0x R (76.2 x 1.65) (73.3) (43.0) SERIES: 2R Suits U/J RUJ2030 or (greasable) x x R (57.2 x 2.41) (52.7) (43.0) 2.50x R (63.5 x 1.65) (60.6) (48.0) USE (1310) SERIES: 21R Suits U/J RUJ x x R (57.2 x 2.41) (52.8) (43.0) 3.00x R (76.2 x 1.65) (73.4) (38.0) USE (1310) SERIES: 25R Suits U/J RUJ x x R (69.9 x 1.65) (66.8) (46.0) USE (1310) SERIES: 3R Suits U/J x x R Suits Double Cardan (50.8 x 2.04) (44.9) (36.1) 2.75x R Double Cardan (69.9 x 1.65) (66.8) (36.1) 2.75x R (69.9 x 1.65) (66.8) (57.0) 3.00x R (76.2 x 1.65) (73.1) (46.8) 3.50x R (88.9 x 1.65) (85.7) (46.8)

7 CATALOGUE PAGE:- 6 AUTOMOTIVE WELD YOKES Tube Butt W/C Size B L Part No. Notes SERIES: 7290 Suits U/J x 65.67(Internal) 3.00x (76.2 x 2.10) (72.2) (47.6)

8 CATALOGUE PAGE:- 7 U-BOLTS, BEARING STRAPS C L L1 J Type Part No. No./pack Notes U-BOLTS AND BEARING STRAPS Ford R Series R Series

9 CATALOGUE PAGE:- 8 LEGEND. D - Drilled T - Threaded SLIP YOKES Spline F/EOS LTH S L L1 Holes Part No. Angle Suits SERIES: 4C Suits U/J x x T 4C Use 4C Assy (34.93 x 16) (141.2) (127.0) NO LONGER AVAILABLE SERIES: 5C Suits U/J x x T 5C Wide angle (39.62 x 16) (152.4) (127.0).375 UNF 2.00 x T 5C C (50.80 x 16) (143.0) (118.0).375 UNF 2.00 x T 5C C Stub (50.80 x 16) (200.0) (175.0).375 UNF Machine Butt SERIES: 6C Suits U/J x x T 6C C Stub (50.80 x 16) (200.0) (175.0).375 UNF 2.00 x T 6C C Y.Shaft (50.80 x 16) (143.0) (135.0).375 UNF 2.00 x T 6C C Y.Shaft (50.80 x 16) (77.0) (58.0).375 UNF SERIES: 7C Suits U/J x x T 7C C Y.Shaft (50.80 x 16) (125.0) (103.1).500 UNF 2.0 x T 7C C Stub (50.80 x 16) (200.0) (177.0).500 UNF SERIES: 8C Suits U/J x x T 8C C Stub (63.50 x 16) (219.2) (190.5).500 UNF 8C Assy SERIES: 8.5C Suits U/J x x T 8.5C Stub (63.50 x 16) (219.2) (190.5).500 UNF SERIES: 9C Suits U/J x x T 9C Stub (76.2 x 16) (270.0) (238.0).500 UNF

10 CATALOGUE PAGE:- 9 LEGEND. D - Drilled T - Threaded SLIP YOKES Spline F/EOS LTH S L L1 Holes Part No. Angle Suits SERIES: 10C Suits U/J x x 32 Inv T 10C C Stub (86.36 x 32) (304.8) (260.4).625 UNF 10C Assy SERIES: J490 Suits U/J x No longer available. Standard joint is To replace components, use 10C components with conversation joint (J490 to 10C) SERIES: 11C/J600 Suits U/J x x 38 Inv T 11C C Stub ( x 38) (336.6) (273.1).750 UNF 11C Assy SERIES: 12C Suits U/J x x 38 Inv T 12C Use 12C Assy ( x 38) (349.3) (273.1) NO LONGER AVAILABLE SERIES: 15C/J800 Suits U/J x x 38 Inv T 15C C Stub ( x 38) (336.6) (273.1).750 UNF 15C Assy 4.0 x 38 Inv T 15C C Stub ( x 38) (336.6) (273.1) M20 x C

11 CATALOGUE PAGE:- 10 LEGEND. D - Drilled T - Threaded POPULAR END YOKES Spline Hub LTH F/EOS S O L1 L Holes Part No. Application SERIES: 6C Suits U/J x x T 6C (44.4 x 10) (66.6) (57.1) (84.1).375 UNF x 10 Rough T 6C (44.4 x 10) (72.5) (95.0).375 UNF x T 6C C (50.8 x 16) (68.0) (55.0) (100.0).375 UNF x 15 Inv T 6C (40 x 15) (54.0) (38.0) (78.6).375 UNF x 14 Inv T 6C (50.9 x 14) (60.0) (64.8) (88.7).375 UNF SERIES: 7C Suits U/J x x T 7C (44.4 x 10) (76.2) (57.1) (101.6).500 UNF x T 7C (44.4 x 10) (75.0) (57.1) (115.0).500 UNF x T 7C C mm Brg (50.8 x 16) (68.0) (50.0) (100.0).500 UNF 7C mm Brg x 31 Inv T 7C C (50.8 x 31) (76.0) (51.0) (83.5).500 UNF SERIES: 8.5C Suits U/J x x 36 Inv T 8.5C Suits 8.5C (58.4 x 36) (84.0) (83.0) (115.0).500 UNF x 18 Inv T 8.5C C mm Brg (60.3 x 18) (90.0) (54.0) (100.0).500 UNF 8.5C mm Brg SERIES: 9C Suits U/J x x T 9C Aux Box (O) (69.85 x 10) (85.7) (74.7) (111.3).500 UNF NO LONGER AVAILABLE x T 9C SSHD F/I (60.33 x 46) (82.6) (66.7) (101.7).500 UNF NO LONGER AVAILABLE x T 9C Fuller Series. 3.5 Seal (69.85 x 10) (88.9) (115.8) (76.2).500 UNF WHILE STOCKS LAST Fabco T Case Fuller Aux Box T 9C.4.PB 1.5 Pilot bore (134.0) (130.0) (137.0).500 UNF

12 CATALOGUE PAGE:- 11 LEGEND. D - Drilled T - Threaded POPULAR END YOKES Spline Hub LTH F/EOS S O L1 L Holes Part No. Application SERIES: 9C Suits U/J x x 26 Inv T 9C Midship (69.85 x 26) (101.6) (90.0) (138.0) 9C

13 CATALOGUE PAGE:- 12 Type 2 Type 1 SHORT COUPLED SHAFT ASSEMBLY MF-MF MF-MF Total Holes L (comp) L1 (comp) Slip Part No. Type Notes SERIES: 5C Suits U/J x T 5C U.Joints Included (155.0) (85.0) (20.0).375 UNF T 5C U.Joints Included (200.0) (130.0) (25.4).375 UNF T 5C U.Joints NOT Included (155.0) (179.8) (54.8).375 UNF Can be shortened by 15mm SERIES: 6C Suits U/J x T 6C U.Joints NOT Included (195.0) (125.0) (25.0).375 UNF T 6C U.Joints Included (221.0) (151.0) (30.0).375 UNF T 6C U.Joints NOT Included (247.0) (177.0) (40.0).375 UNF T 6C U.Joints NOT Included (260.0) (190.0) (45.0).375 UNF T 6C U.Joints NOT Included (270.0) (200.0) (55.0).375 UNF T 6C U.Joints NOT Included (320.0) (250.0) (65.0).375 UNF SERIES: 7C Suits U/J x T 7C U.Joints Included (225.0) (132.6) (30.0).500 UNF T 7C U.Joints Included (259.0) (176.6) (45.0).500 UNF T 7C U.Joints Included (280.0) (197.6) (75.0).500 UNF T 7C U.Joints NOT Included (292.4) (210.0) (50.0).500 UNF T 7C U.Joints Included (310.0) (227.6) (75.0).500 UNF

14 CATALOGUE PAGE:- 13 Type 2 Type 1 SHORT COUPLED SHAFT ASSEMBLY MF-MF MF-MF Total Holes L (comp) L1 (comp) Slip Part No. Type Notes SERIES: 7C Suits U/J x T 7C U.Joints NOT Included (392.4) (310.0) (110.0).500 UNF SERIES: 8C Suits U/J x T 8C U.Joints NOT Included (315.0) (232.6) (50.0).500 UNF T 8C U.Joints Included (344.0) (261.4) (60.0).500 UNF T 8C U.Joints Included (365.0) (282.6) (60.0).500 UNF SERIES: 8.5C Suits U/J x T 8.5C U.Joints NOT Included (275.0) (173.4) (20.0).500 UNF T 8.5C U.Joints Included (310.0) (208.4) (65.0).500 UNF T 8.5C U.Joints Included (340.0) (238.4) (65.0).500 UNF SERIES: 9C Suits U/J x T 9C U.Joints Included (347.0) (245.4) (72.0).500 UNF T 9C U.Joints Included (435.0) (333.4) (95.0).500 UNF SERIES: 10C Suits U/J x T 10C U.Joints NOT Included (620.0) (490.0) (150.0).625 UNF

15 CATALOGUE PAGE:- 14 Type 2 Type 1 YOKE SHAFT AND BARREL ASSEMBLY C to Weld Butt Total L B Slip Type Angle Holes Part No. Suits SERIES: 4C T 4C x3 Tube (161.0) (44.2) (50.0).312 UNF SERIES: 5C T 5C C & 5C (187.5) (58.2) (50.8).375 UNF 2.5x.109 Tube T 5C x4 Tube (205.0) (52.2) (105.0).375 UNF SERIES: 6C T 6C x4 Tube (240.0) (62.2) (105.0).375 UNF SERIES: 7C T 7C x4 Tube (240.0) (72.2) (110.0).500 UNF T 7C x4 Tube (241.5) (80.2) (130.0).500 UNF SERIES: 8C T 8C x4 Tube (350.0) (82.2) (110.0).500 UNF WHILE STOCKS LAST T 8C x6 Tube (299.4) (88.2) (130.0).500 UNF SERIES: 8.5C T 8.5C x5 Tube (305.0) (90.2) (110.0).500 UNF C x6 Tube (290.0) (88.2) (130.0).500 UNF T 8.5C C & (265.0) (95.1) (88.9).500 UNF 4.09 X.180 tube

16 CATALOGUE PAGE:- 15 Type 2 Type 1 YOKE SHAFT AND BARREL ASSEMBLY C to Weld Butt Total L B Slip Type Angle Holes Part No. Suits SERIES: 9C T 9C x6 Tube (320.0) (98.2) (110.0).500 UNF T 9C x7.5 Tube (265.0) (100.2) (130.0).500 UNF T 9C x.250 Tube (315.0) (101.8) (105.0).500 UNF T 9C C & (320.0) (107.7) (114.3).500 UNF 4.59x.180 Tube SERIES: 10C T 10C x5 or 145x7.5 Tube (395.0) (130.2) (150.0).625 UNF T 10C C & 10C (365.3) (108.2) (108.1).625 UNF 5 x.375 Tube SERIES: 11C T 11C x5 or 145x7.5 Tube (395.0) (130.2) (150.0).750 UNF SERIES: 12C T 12C x10 Tube (358.0) (140.2) (150.0) M14 x 1.5 SERIES: 14C T 14C x13.3 tube (380.0) (202.8) (135.0) M18 x 1.5 SERIES: 15C T 15C C & 15C (417.6) (146.3) (127.0).750 UNF 6.5x.375 Tube T 15C x9.5 Tube (435.0) (165.3) (127.0).750 UNF T 15C x9.5 Tube (435.0) (165.3) (127.0) M20 x 2.5

17 CATALOGUE PAGE:- 16 LEGEND. D - Drilled T - Threaded WELD YOKES Tube Butt W/F Size B L Holes Part No. Angle Notes SERIES: 3C Suits U/J x x D 3C (63.5 x 2.11) (59.4) (31.8).312 UNF SERIES: 4C Suits U/J x x T 4C (63.5 x 2.11) (59.4) (31.8).312 UNF 50x T 4C UNF SERIES: 5C Suits U/J x X T 5C (63.5X2.77) (58.3) (69.9).375 UNF 60x T 5C Use 5C Machine Butt.375 UNF 73x T 5C UNF SERIES: 6C Suits U/J x x T 6C (76.2 x 2.41) (71.6) (47.7).375 UNF 70x T 6C Use 6C Machine Butt SERIES: 7C Suits U/J x x T 7C (88.9 x 3.40) (82.3) (45.0).500 UNF 3.5x T 7C M 25 (88.9 x 3.40) (82.3) (45.0) M12 x x T 7C Use 7C Machine Butt.500 UNF SERIES: 8C Suits U/J x x T 8C (101.6 x 4.75) (92.2) (68.3).500 UNF 90x T 8C UNF WHILE STOCKS LAST 100x T 8C UNF

18 CATALOGUE PAGE:- 17 LEGEND. D - Drilled T - Threaded WELD YOKES Tube Butt W/F Size B L Holes Part No. Angle Notes SERIES: 8.5C Suits U/J x x T 8.5C Use 8.5C Machine Butt.500 UNF 100x T 8.5C UNF 4.09x T 8.5C (103.9 x 4.57) (95.0) (66.0).500 UNF 4.09x T 8.5C Internal 2.5 x 16 Spline (103.9 x 4.57) (95.0).500 UNF for fabricated y/shafts SERIES: 9C/J310 Suits U/J x x T 9C (114.3 x 6.35) (101.6) (63.5).500 UNF 110x T 9C Use 9C Machine Butt.500 UNF SERIES: 10C Suits U/J x x T 10C (63.5 x 2.77) (58.3) (69.9).625 UNF 140x T 10C UNF 140x T 10C UNF 140x T 10C M 20 M16 x 2.0 SERIES: J490 Suits U/J x x T 10.5C Option to use 10C components (165.1 x 6.40) (152.4) (81.3).625 UNF WHILE STOCKS LAST and conversion joint 10C J490 SERIES: 11C/J600 Suits U/J x x T 11C (165.1 x 9.53) (146.1) (88.9).750 UNF WHILE STOCKS LAST 140x T 11C UNF

19 CATALOGUE PAGE:- 18 LEGEND. D - Drilled T - Threaded WELD YOKES Tube Butt W/F Size B L Holes Part No. Angle Notes SERIES: 12C Suits U/J x x T 12C (165.1 x 9.53) (146.1) (101.6) M14 x 2.0 WHILE STOCKS LAST 160x T 12C M14 x 1.5 SERIES: 14C Suits U/J x x T 14C M18 x 1.5 SERIES: 15C/J800 Suits U/J x x T 15C (165.1 x 9.53) (146.1) (101.6) UNF 6.50x T 15C (165.1 x 9.53) (146.1) (101.6) M20 x x T 15C Machine Butt to suit (184.1 x 6.35) (171.8) (89.0) UNF 184 x 9.5 Tube 7.25x T 15C Machine Butt to suit (184.1 x 6.35) (171.8) (89.0) M20 x x 9.5 Tube

20 CATALOGUE PAGE:- 19 LEGEND. D - Drilled T - Threaded CENTRE PLATES Face/Face L Holes Part No. Notes SERIES: 17C 0.78 D 17R (19.8) WHILE STOCKS LAST SERIES: 2C Suits U/J D 2C WHILE STOCKS LAST SERIES: 8C Suits U/J D 8C J (44.5).500 UNF WHILE STOCKS LAST 2.92 T 8C J (74.2).500 UNF WHILE STOCKS LAST SERIES: 9C Suits U/J T 9C J (88.9).500 UNF WHILE STOCKS LAST 4.50 T 9C (114.3).500 UNF WHILE STOCKS LAST SERIES: 10.5C /J490 Suits U/J T 10.5C (58.4).625 UNF WHILE STOCKS LAST

21 CATALOGUE PAGE:- 20 STUB SHAFTS Spline Tube Butt W/EOS S Size B L L2 Type Part No. Suits SERIES: 5C 1.56 x x C C Slip (39.62 x 16) (63.5 x 2.77) (57.9) (162.1) (76.2) SERIES: 6C 2.00 x 16 3x C C Slip (50.80 x 16) (76.2 x 2.41) (71.5) (223.0) (76.2) SERIES: 7C 2.0 x x C C Slip (50.80 x 16) (88.9 x 3.40) (82.3) (223.0) (88.9) 2.0 x x C Steel spline (50.80 x 16) (88.9 x 3.40) (82.3) (232.0) (90.0) SERIES: 8C / 8.5C 2.5 x 16 4x C C Slip (63.50 x 16) (101.9 x 4.75) (92.2) (254.0) (114.3) 8C Assy SERIES: 10C 3.4 x 32 Inv 5x C C Slip (86.36 x 32) (127.0 x 9.53) (108.0) (317.5) (152.4) Use 10C Assy SERIES: 11C/J x 37 b/on x C Use 11C or ( x 37 b/on 38 (165.1 x 6.35) (146.1) (360.4) (165.1) 11C SERIES: 15C/J x 37 b/on x C C Slip ( x 37 b/on 38 (165.1 x 6.35) (146.1) (360.4) (165.1) 15C

22 CATALOGUE PAGE:- 21 L L L3 L3 L2 L2 SJ P B SJ P1 P B MIDSHIP STUBS Tube Butt W-EOS Size B L L2 L3 P J Type Part No. Notes / Suggestions SPLINE: 1.75 x 10 (44.45 x 10) 3.00 x x C (76.2 x 3.40) (70.3) (123.0) (54.0) (103.2) (49.2) SPLINE: 2.00 x 16 (50.80 x 16) 2.87 x M27 x 2 4 6C C C (73.0 x 4.00) (65.1) (200.0) (50.0) (178.3) (55.0) Machine butt use 70x4 tube 3.50 x M27 x 2 4 7C C C (88.9 x 4.00) (82.3) (202.3) (50.0) (178.3) (60.0) 3.50 x M27 x 2 4 7C C C (88.9 x 4.00) (82.3) (202.3) (50.0) (178.3) (65.0) SPLINE: 2.00 x 31 Inv (50.80 x 31 Inv) 3.50 x x C C (88.9 x 3.00) (83.0) (184.3) (47.7) (155.0) (61.9) Keyway on bearing surface SPLINE: 2.33 x 36 Inv (59.18 x 31 Inv) 4.00 x x C C (101.6 x 4.75) (92.2) (225.0) (79.2) (199.1) (68.2) SPLINE: 2.36 x 18 Inv (60.00 x 18 Inv) 4.00 x M33 x C C (101.6 x 4.75) (92.2) (220.0) (54.0) (186.0) (65.0) 4.00 x M33 x C C (101.6 x 4.75) (92.2) (220.0) (54.0) (186.0) (70.0) SPLINE: 2.75 x 26 Inv (70.00 x 26 Inv) 4.50 x M45 x 3 4 9C C (114.3 x 6.57) (101.4) (310.0) (90.0) (155.0) (75.0) SPLINE: 2.94 x 46 Inv (74.60 x 46 Inv) 6.50 x C (165.0 x 9.52) (146.2) (208.3) (81.0) (101.6) SPECIAL ORDER ONLY SPLINE: 3.59 x 57 Inv (91.20 x 57 Inv) 6.50 x M20 x C Female thread (165.9 x 9.52) (146.2) (284.2) (100.3) (210.0) (100.0) 6.50 x UNF 3 15C Female thread (165.9 x 9.52) (146.2) (289.1) (102.4) (96.8)

23 CATALOGUE PAGE:- 22 MIDSHIP NUTS & WASHERS Size Part No. Notes 1¼ x Self Lock Nut Flanged Std Washer M27 x 2 (28id x 50od x 4 thick) 6C Nyloc Nut 6C & 7C 6C Washer M33 x 2 (35id x 65od x 4 thick) 8.5C Nyloc Nut 8.5C Washer M45 x 3 (47id x 85od x 6 thick) 9C Nyloc Nut 9C Washer MIDSHIP SPACERS Size Part No. Notes 52.0 id x 60.0 od x 34 long 7C Suit 7C id x 65.0 od x 34 long 7C Suit 7C id x 65.0 od x 28 long 8.5C Suit 8.5C id x 70.0 od x 28 long 8.5C Suit 8.5C id x od x 85.5 long 9C Suit 9C

24 CATALOGUE PAGE:- 23 BARREL Spline LTH Butt S L L1 B Part No. Suits SERIES: 11C/12C/15C 4.0 x 37 b/on C C Stub ( x 37 b/on 38) (273.1) (228.6) (114.3) D L REPLACEMENT DUST COVERS Series OD ID Seal Length Part No. Suits Application A B D L 6C C C C C C C C C C C Also suits 10C & 11C

25 CATALOGUE PAGE:- 24 LEGEND. D - Drilled T - Threaded YOKE SHAFTS Spline F/EOS LTH S L L2 Holes Part No. Angle Suits SERIES: 5C 2.00 x T 5C (50.80 x 16) (121.0) (50.8).375 UNF 2.00 x T 5C C Slip (50.80 x 16) (145.0) (50.8).375 UNF SERIES: 6C 2.0 x T 6C C Slip (50.80 x 16) (97.0) (27.9).375 UNF 2.0 x T 6C C Slip (50.80 x 16) (173.0) (63.5).375 UNF SERIES: 7C 2.0 x T 7C C Slip (50.8 x 16) (175.0) (57.2).500 UNF SERIES: 8C 2.5 x T 8C (63.50 x 16) (203.0) (76.2) 500 UNF 2.5 x T 8C (63.50 x 16) (231.9) (101.6) 500 UNF SERIES: 9C 3.0 x T 9C C Slip (76.20 x 16) (290.0) (130.0) 500 UNF SERIES: 15C 4.0 x T 15C C Slip ( x 38) (340.0) (100) M20 x 2.5

26 CATALOGUE PAGE:- 25 DOUBLE CARDAN Uni Joint Uni Joint Centering Housing Centre "H" Seal, Spring, Complete Yoke Weld Yoke Yoke and Centering Bush Assembly SERIES: 2.5RCV R512.0 (c/w- 25R512.0) Dimensional data of Complete Assembly. D1 D2 x D3 B L Suits End Yoke 5/16 UNF x x ( ) 25R (47.5 x 59.4) (47.6) (112.0) (34.92 x 21sp)

27 CATALOGUE PAGE:- 26 SAGINAW DOUBLE CARDAN A 6 Centre Uni Joint Pinned Cardan Ball Kit Yoke Complete Yoke Flange Weld Yoke Assembly Liner Assembly SERIES: SAGINAW TO 3R Suits U/J x R R R CVK2A 3R Dimensional data of parts. Item B D D1 D2 x D3 K L N Part No x x (44.9) (107.8) (11.6 x 4) (76.2 x 76.2) (79.4) (168.0) (125.5) DOUBLE CARDAN - Dimensional data Item L Cl to Cl Part No. Suits Weld Yoke(s) R6000 Standard 6C Suits U/J (162.1) (127.0) R7126 Standard 7C (204.0) (162.8) R8500 Standard 8.5C (221.6) (170.8)

28 CATALOGUE PAGE:- 27 DUST CAPS AND WELCH PLUGS Spline Spline Part No. S Y/N Type Compound Suits 10C x 32 N Screw Steel 10C C x 38 N Screw Steel 11C C C C C.DCK 1.56 x 16 N Screw Steel 5C x 16 N Screw Rubber 5C C C C C C C.DCK 1.75 x 16 N Screw Steel Rockford 6C Slip Yokes x 16 N Screw Rubber 8.5C x 16 N Screw Rubber 9C C.DCK 2.00 x 16 N Screw Steel Rockford 7C Slip Yokes 8C.DCK 2.50 X 16 N Screw Steel Rockford 8C & 8.5C Slip Yokes 8C.DCK x 10 Y Screw Steel Rockford 8C Slip Yokes 9C.DCK 3.00 x 16 N Screw Steel Rockford 9C Slip Yokes

29 CATALOGUE PAGE:- 28 UNIVERSAL JOINT CAP only) SCREWS (to suit block bearings Series Thread x Length Type Part No. Notes Torque Setting (ft-lb) (Nm) 4C UNF x (30-37) 5C UNF x (qty 8) 114.6CBK (50-66) 6C UNF x (qty 8) 114.6CBK (50-66) 7C UNF x (qty 8) 114.7CBK (88-102) 8C UNF x (qty 8) 114.7CBK (88-102) 8.5C UNF x (qty 8) CBK ( ) 9C UNF x (qty 8) CBK ( ) 9.5C UNF x (each) 9.5C J ( ) 10C UNF x (qty 8) CBK ( ) 10C UNF x (each) 10.5C J ( ) 10C M16 x 2 x 80 2 (each) 10C ( ) 11C UNF x (each) 15C ( ) 12C M14 x 1.5 x 80 1 (each) 12C ( ) 12C M14 x 2.0 x 80 1 (each) 12C ( ) 14C M18 x 1.5 x (each) 14C ( ) 15C UNF x (each) 15C ( ) 15C M20 x 2.5 x 90 1 (each) 15C ( )

30 CATALOGUE PAGE:- 29 STANDARD COMPONENTRY ASSEMBLED LENGTHS Series Uni Joint Slip Yoke Stub Barrel Tube Weld Yoke Uni-Joint Lube for Life Universal Joints 4C (36.52 x 87.32) 4C (L=141.2) 4C (L=146.1) x.083 (B = 59.4) 4C (L=31.8) (M/F to C = 15.5) 5C (42.85 x 88.9) - - 5C (L= 205.0) 60 x 4 5C (L=45.0) (M/F to C = 17.5) 5C (42.85 x 88.9) 5C (L=200.0) 6C (L=223.0) - * Machine butt to suit 5C (L=46.7) (42.85 x 88.9) 6C (42.85 x 114.3) 6C (L=200.0) 6C (L=223.0) x.095 (B = 71.6) 6C (L=48.0) (M/F to C = 17.5) LFL 6C (42.85 x 114.3) - - 6C (L= 240.0) 70 x 4 6C (L=50.0) (M/F to C = 17.5) LFL 7C (49.21 x 117.6) 7C (L=200.0) 7C (L=223.0) x.134 (B =) 7C (L=66.0) (49.21 x 117.6) LFL 7C (49.21 x 117.6) - - 7C (L= 240.0) 80 x 4 7C (L=55.0) (49.21 x 117.6) LFL 8C (49.21 x ) 8C (L=219.2) 8C (L=254.0) x.187 (B = 92.2) 8C (L=68.3) (49.21 x ) LFL 8C (49.21 x ) - - 8C (L= 350.0) 90 x 4 8C (L=70.0) (49.21 x ) LFL 8.5C J230 Twin Disk (71.44 x ) 8.5C (L=219.2) (L=235.0) x.134 (B =) 8.5C (L=92.0) (71.44 x ) LFL 8.5C J230 Twin Disk (71.44 x ) C (L= 305.0) 100 x 5 8.5C (L=75.0) (71.44 x ) LFL

31 CATALOGUE PAGE:- 30 Series Uni Joint Slip Yoke Stub Barrel Tube Weld Yoke Uni-Joint Lube for Life Universal Joints 9C J310 Twin Disk 9C J310 Twin Disk (71.44 x 168.3) (71.44 x 168.3) 10C (92.07 x 165.1) 10C (92.07 x 165.1) J490 Twin Disk 11C J600 Twin Disk 11C J600 Twin Disk (J490/10C Conv. joint) (88.9 x ) (88.9 x ) 12C (99.2 x 241.3) 14C ( x 269.5) 15C J800 Twin Disk 15C J800 Twin Disk 15C J800 Twin Disk (99.97 x ) (99.97 x ) (99.97 X ) 9C (L=270.0) (L= 284.2) - - 9C (L= 320.0) 10C (L=304.8) 10C (L= 317.5) C (L= 387.0) 10C (L=304.8) 11C (L=336.6) 10C (L= 317.5) 15C (L= 360.4) C (L= 395.0) 12C (L=349.3) 15C (L= 360.4) x.250 (B = 101.6) 10C x.375 (B = 108.0) 10C x.375 (B = 108.0) 11C x.375 (B = 146.1) x.375 (B = 146.1) 9C (L=63.5) 110 x 6 9C (L=65.0) 10C (L=88.9) 140 x 5 10C (L=95.0) 10C (L=88.9) 11C (L=88.9) 140 x 5 11C (L=108.5) 12C (L=101.6) (71.44 x 168.3) (71.44 x 168.3) (92.07 x 165.1) (92.07 x 165.1) (J490/10C Conv. joint) (88.9 x ) (88.9 x ) (99.2 x 241.3) C C ( x 269.5) 15C (L=336.6) 15C (L= 360.4) C (L=) 15C (L=336.6) 15C (L= 360.4) 15C x.375 (B = 146.1) 15C (L=101.6) 184 x C (L=) x C (L=101.6) (99.97 x ) (99.97 x ) (99.97 X ) LFL 9C (L=290.0) LFL LFL LFL U.N.F LFL METRIC LFL METRIC

MECHANICS CATALOGUE PAGE:- 1 MECHANICS GENERAL DIMENSIONAL DATA (79.35) (90.47) (107.92) (115.06) (140.46) (148.38) (206.32) (165.07) (209.52) (28.

MECHANICS CATALOGUE PAGE:- 1 MECHANICS GENERAL DIMENSIONAL DATA (79.35) (90.47) (107.92) (115.06) (140.46) (148.38) (206.32) (165.07) (209.52) (28. CATALOGUE PAGE:- 1 GENERAL DIMENSIONAL DATA D3 D2 D3 D2 X L D1 Series X D2 x D3 (mm x mm) K L D1 (drilled) D1 (Bolt thread) 2C 0.38 33.34 x 59.53 3.12 0.52 0.34 5/16-24 (9.65) (79.35) (13.2) (8.64) 3C

More information

INDEX SECTION B:4 MECHANICS TYPE "R" SERIES UNIVERSAL JOINT TORQUE CAPACITIES

INDEX SECTION B:4 MECHANICS TYPE R SERIES UNIVERSAL JOINT TORQUE CAPACITIES INDEX SECTION B:4 MECHANICS TYPE "R" SERIES SERIES SECTION 1R...B:4-3 2R...B:4-21R...B:4-11 25R...B:4-15 3R...B:4-1 MID SHIP ASSEMBLIES...B:4-19 TRIPOD STYLE...B:4-21 UNIVERSAL JOINT TORQUE CAPACITIES

More information

JAPANESE CATALOGUE DRIVELINE. branches. SERVICES AUSTRALIA the underbody & power transmission specialists driveline driveline.com.

JAPANESE CATALOGUE DRIVELINE. branches. SERVICES AUSTRALIA the underbody & power transmission specialists driveline driveline.com. DRIVELINE SERVICES AUSTRALIA the underbody & power transmission specialists P (07) 3275 7600 F (07) 3274 1435 E sales@driveline.com.au W driveline.com.au ABN 83 064 482 613 JAPANESE CATALOGUE branches

More information

CENTRE BEARING CATALOGUE

CENTRE BEARING CATALOGUE DRIVELINE S E R V I C E S A U S T R A L I A the underbody & power transmission specialists P (07) 3275 7600 F (07) 3274 1435 E sales@driveline.com.au W driveline.com.au ABN 83 064 482 613 CENTRE BEARING

More information

ON AND OFF HIGHWAY TRUCKING

ON AND OFF HIGHWAY TRUCKING DRIVELINE S E R V I C E S A U S T R A L I A the underbody & power transmission specialists ON AND OFF HIGHWAY TRUCKING Complete from Air Dryers to Wheel Ends brisbane south brisbane north mackay townsville

More information

UJ DIMENSIONS CATALOGUE

UJ DIMENSIONS CATALOGUE the underbody & power transmission specialists P (07) 375 7600 F (07) 37 35 E sales@driveline.com.au W driveline.com.au ABN 83 06 8 63 UJ DIMENSIONS ATALOGUE branches brisbane south brisbane north dubbo

More information

PRICE LIST (AUST $ inc GST) PART No. DESCRIPTION RETAIL CHASSIS CLIP ASSEMBLIES

PRICE LIST (AUST $ inc GST) PART No. DESCRIPTION RETAIL CHASSIS CLIP ASSEMBLIES PRICE LIST (AUST $ inc GST) 01-03-13 PART No. DESCRIPTION RETAIL CHASSIS CLIP ASSEMBLIES CHASSIS CLIPS 4 LINK CHASSIS CLIP, MOLY 4 LINK, QA1 COIL OVER SHOCKERS & BRACKETRY, TRACK LOCATOR BAR AND NEW 9"

More information

IMPORTANT INFORMATION

IMPORTANT INFORMATION IMPORTANT INFORMATION Issue Date 2018 Catalog 4x4QR 2018 Please read the following important information before using this Catalog: ALWAYS CONSULT AND REVIEW THE ORIGINAL MANUFACTURERS INSTRUCTION MANUAL(S)

More information

TRANSMISSIONS MANUAL

TRANSMISSIONS MANUAL DMR-5023 Stick shift pilot bearing. Knurled for sure fit, self aligning for perfect fit and smooth running and shift. Fits ant GM manual stick transmission crank. Allows GM transmission in Ford cars. DMR-5022

More information

CATALOGUE INDEX. Profiles & Dimensions - Non Braked Profiles & Dimensions - Braked. Dimensions - Non Braked Dimensions - Braked

CATALOGUE INDEX. Profiles & Dimensions - Non Braked Profiles & Dimensions - Braked. Dimensions - Non Braked Dimensions - Braked Page: Warranty CATALOGUE INDEX 8 9 0 8 9 0 Australian Design Rules Calculating Pitch Circles Non Braked Hubs & Stubs Non Braked Hubs & Stubs Non Braked Hubs & Stubs Non Braked Hubs & Stubs Disc Braked

More information

DRIVELINE COMPONENTS CATALOG CENTER YOKES, TUBE YOKES AND BALL STUD TUBE YOKES

DRIVELINE COMPONENTS CATALOG CENTER YOKES, TUBE YOKES AND BALL STUD TUBE YOKES DRIVELINE COMPONENTS CATALOG CENTER YOKES, TUBE YOKES AND BALL STUD TUBE YOKES JUNE 2008 Supersedes Section 5, Dated November 2005 Change Log: 10/2/08 pg 5 140-28-17 centerline to point of weld dimension

More information

Driveshaft Components

Driveshaft Components Demand the original. Driveshaft Components www.demandaam.com Demand the original. Demand the original. Only original equipment components are guaranteed to meet the same specifications as the parts they

More information

2014 Catalogue PDF - Available while new website is being updated. Trailer

2014 Catalogue PDF - Available while new website is being updated. Trailer Light s Strong and secure braked or unbraked options Easy to use plunger or lever type handles Zinc-plated for added protection COUPLINGS Use one of our quality couplings with confi dence when towing.

More information

Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING

Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors utomotive Pullers & PULLING & EXTRCTING 337 PULLING & EXTRCTING Toledo Pullers comprehensive range including Mechanical,

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLOC-6909A-T November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT) FORCED

More information

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated

More information

DISCOUNT TRACTOR PARTS

DISCOUNT TRACTOR PARTS DISCOUNT TRACTOR PARTS Parts catalogue Ford 2000, 3000, 3600, 3900 Ph 0800 872272 www.discounttractorparts.co.nz email sales@discounttractorparts.co.nz Front Axle King pin LH/RH $133.30 per side Spindle

More information

GROUP 16 - PROPELLER SHAFT AND UNIVERSAL JOINT WASHER SCREW BUSHING SEAL RETAINER PROPELLER SHAFT (AXLE END)

GROUP 16 - PROPELLER SHAFT AND UNIVERSAL JOINT WASHER SCREW BUSHING SEAL RETAINER PROPELLER SHAFT (AXLE END) PROP. SHAFT & U/JOINT 1961 PASSENGER CAR PARTS CATALOG Page 16-1 GROUP 16 - PROPELLER SHAFT AND UNIVERSAL JOINT SEAL 16-08-6 BUSHING 16-10-1 RETAINER 16-09-2 v.. WASHER SCREW 16-02-5 BUSHING16-10-1 SEAL16-08-6

More information

MODELNO~. 1_2_ 7_F_T_2 _3_1_7-_1_2 PARTNO~. 4_2_6_21_8_7 DATE ~2~4_-0~8~-~20~O~1. T20000 Series REFERENCE ONLY GRP-T

MODELNO~. 1_2_ 7_F_T_2 _3_1_7-_1_2 PARTNO~. 4_2_6_21_8_7 DATE ~2~4_-0~8~-~20~O~1. T20000 Series REFERENCE ONLY GRP-T MODELNO~. 1_2_ 7_F_T_2 _3_1_7-_1_2 PARTNO~. 4_2_6_21_8_7 DATE ~2~4_-0~8~-~20~O~1 T20000 Series 2 GRP-T20-05 04-00 ~p SPICER OFF-HIGHWAY MODEL: 1207FT20317-12 PN : 4262187 SPECIAL PARTS SECTION GRP NO.

More information

DISCOUNT TRACTOR PARTS PH MASSEY FERGUSON 165 & 175 Wheel Tractors. Parts catalogue and price list

DISCOUNT TRACTOR PARTS PH MASSEY FERGUSON 165 & 175 Wheel Tractors. Parts catalogue and price list DISCOUNT TRACTOR PARTS PH 0800 872272 MASSEY FERGUSON 165 & 175 Wheel Tractors Parts catalogue and price list ALL PRICES PLUS GST & SUBJECT TO CHANGE Page 4 212 Engine cont. Top Gasket Set $60.84 Bottom

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTO-6909ALL November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT)... 9

More information

MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)

MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70

More information

MERITOR DRIVELINE QUICK REFERENCE GUIDE IDEAS DRIVING RESULTS

MERITOR DRIVELINE QUICK REFERENCE GUIDE IDEAS DRIVING RESULTS MERITOR DRIVELINE QUICK REFERENCE GUIDE IDEAS DRIVING RESULTS IMPORTANT INFORMATION DISCLAIMER Information contained in this publication is in effect at the time the publication was approved for printing

More information

Discount Tractor Parts Ph FORD 4000 Parts Catalogue Published July 2012

Discount Tractor Parts Ph FORD 4000 Parts Catalogue Published July 2012 Discount Tractor Parts Ph 0800 872272 www.discounttractorparts.co.nz FORD 4000 Parts Catalogue Published July 2012 Discount Tractor Parts 7 Airdrie Rd., Box 70059, Ranui, Auckland Ph 0800 872 272 09 8337483

More information

Universal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...

Universal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown... Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup

More information

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTO-4909ALL November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... CASE (FRONT)... 0 COMBINATION

More information

Edition October 2014 Part No

Edition October 2014 Part No Edition 1.3 - October 2014 Part No. 8999076 1 Contents Ordering Your Parts... 3 Centre Section - S180025.70... 5 Wing Section - S180025.71/72...7 Centre Axle - S180025.110... 9 Wing Axle - S180025.111...10

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List FRO-70C November 0 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AIR MODULE & RANGE CYL.... 5 AUXILIARY DRIVE GEAR... 7 CASE (AUX)...

More information

REBUILT NV3550 TO FORD BRONCO

REBUILT NV3550 TO FORD BRONCO KIT CONSISTS OF: PAGE 1 OF 6 Page Rev. Date: 08-15-16 No. Qty Part No. Description 1. 1 26-3550R REMANUFACTURED NV3550 TRANSMISSION 2. 1 Kit 50-9920 TRANSFER CASE ADAPTER & TC SHIFTER BRKT. 3. 1 Kit 712544

More information

L 2.460" 320 L L 2.430" 485 L 2.460" 400. Damper. Damper 1 + Damper

L 2.460 320 L L 2.430 485 L 2.460 400. Damper. Damper 1 + Damper PERFORMANCE VALVE SPRING APPLICATION Crow Cams valve springs are made from aircraft quality alloy steels to give the best performance and reliability at a reasonable price. They are specially designed

More information

Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown

Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown Universal Platform 282 Model Section 5 Platform Parts Breakdown... 2-3 Retractable Finger Auger Parts Breakdown... 4-5 Combine Pickup Head Parts Breakdown... 6- Return to this page by clicking the upper

More information

Driveline Components Catalog Small Parts

Driveline Components Catalog Small Parts Driveline Components Catalog Small Parts J300P-9 October 2016 Supersedes J300P-9 Dated December 2008 Our most comprehensive listing of Spicer small parts, including all the part numbers currently being

More information

Universal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...

Universal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown... Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup

More information

Common U-Joint Kits By Series. Spicer OE Kit (Triple Lip Non-Greaseable)

Common U-Joint Kits By Series. Spicer OE Kit (Triple Lip Non-Greaseable) Common U-Joint Kits By Driveline Service Kit (Greaseable) Kit (Triple Lip Non-Greaseable) Life Kit (Greaseable) Life Kit (Non-Greaseable) 1210 5-443X 5-736X 1310/SPL22 5-153X/5-1200X 5-810X / SPL22-7X

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List FRO-60B November 0 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AIR MODULE & RANGE CYL.... 5 AUXILIARY DRIVE GEAR... 7 CASE (AUX)...

More information

Rotary Cutter RCR P Parts Manual. Copyright 2017 Printed 07/14/17

Rotary Cutter RCR P Parts Manual. Copyright 2017 Printed 07/14/17 Rotary Cutter RCR1884 24584 312-880P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life

More information

G W DISCONTINU. SERVICE TOOLS for COMPANIES, INC. HEAVY DUTY TRUCK TRANSMISSIONS AXLES TIMING BLOCKS gwtoolco.com

G W DISCONTINU. SERVICE TOOLS for COMPANIES, INC. HEAVY DUTY TRUCK TRANSMISSIONS AXLES TIMING BLOCKS gwtoolco.com G & TOOL W SERVING THE GEAR INDUSTRY OVER 45 YEARS COMPANIES, INC. SERVICE TOOLS for HEAVY DUTY TRUCK TRANSMISSIONS AXLES (FULLER T-9824) G-38: INPUT SHAFT BEARING PULLER Countershaft Front Bearings (#81007)

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List FRO-420C November 202 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AIR MODULE & RANGE CYL.... 5 AUXILIARY DRIVE GEAR... 7 CASE

More information

40000 IGNITION HEI Ext. Coil Terminal Kit

40000 IGNITION HEI Ext. Coil Terminal Kit 40000 IGNITION 40010 19.95 HEI Ext. Coil Terminal Kit 40020 43.95 HEI Cap Assy. (External Coil Modification) Coil Wire exits through aera where lead wires normally are. Fits under stock coil cover Prevents

More information

Illustrated Parts List

Illustrated Parts List Spicer Drive Axles Illustrated Parts List AXIP-0055 May 2014 S130, S132 Model Table of Contents Table of Contents General Information...2 How To Use Illustrated Parts List...2 Model Identification...3

More information

IMPORTANT: Dana made

IMPORTANT: Dana made Spicer Drive Axles Illustrated Parts List AXIP-0057 - Models Designed BEFORE June 10, 2013 October 2013 D170, D170D, R170, R170D - Single Reduction - Tandem Axles D190, D190D, R190, R190D - Single Reduction

More information

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER...

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER... RTO-14909ALL July 2011 Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER... 9 COUNTERSHAFT & BRGS(AUX)... 10 COUNTERSHAFT

More information

Auto Air Valve Parts List

Auto Air Valve Parts List Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-898B November 0 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT)... 9

More information

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER...

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER... RTO-14909MLL July 2011 Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER... 9 COUNTERSHAFT & BRGS(AUX)... 10 COUNTERSHAFT

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTO-660 November 0 Contents How To Use The Illustrated s List... AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)... 9 COUNTERSHAFT

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-698B November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 6 CASE (AUX)... 7 CASE (FRONT)... 0 CASE

More information

Long Welding Neck Flanges Catalogue

Long Welding Neck Flanges Catalogue Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES

More information

PARTS BOOK John Deere Twin Fan 640/645FD

PARTS BOOK John Deere Twin Fan 640/645FD Parts Order Information PARTS BOOK John Deere Twin Fan 640/645FD Contact Info: TEMP Farm Equipment Ltd. 3890 Wellington St. Box 269 Mitchell, Ontario, Canada N0K-N0 Phone: -877-348-0066 or 59-348-0066

More information

Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG

Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG with Adapters for: Model 7000 Self-Propelled Windrower Model 9000 Self-Propelled Windrower John Deere 7720, 8820, 9500, 9600

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-8A November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... CASE (FRONT)... 8 COUNTERSHAFT

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-898B-T November 0 Contents How To Use The Illustrated s List... AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 8 CASE (FRONT) FORCED LUBE... COUNTERSHAFT

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List FR-0B November 0 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AIR MODULE & RANGE CYL.... 5 AUXILIARY DRIVE GEAR... 7 CASE (AUX)...

More information

BUSH HOG C.V. SHAFT PARTS IDENTIFICATION GUIDE

BUSH HOG C.V. SHAFT PARTS IDENTIFICATION GUIDE BUSH HOG C.V. SHAFT PARTS IDENTIFICATION GUIDE DECALS PART # 91443 PART # 87340 PART # 78786 PART # 78608 JIMBO SMALL 1/20/2011 C.V. SHAFTS IDENTIFYING TIPS NOTE : TO IDENTIFY BETWEEN BONDIOLI AND COMER

More information

CS24/25 SERIES CLUTCH SHIFT PTO

CS24/25 SERIES CLUTCH SHIFT PTO CS/ SERIES CLUTCH SHIFT PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. CS/ PTO EXPLODED VIEWS Detail B Detail A Detail E Detail C Detail D DETAIL A OUTPUT SHAFT ASSEMBLY 7 CS/ STANDARD OUTPUT

More information

PARTS LIST AND SERVICE MANUAL

PARTS LIST AND SERVICE MANUAL CS0 & CS SERIES CLUTCH SHIFT PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. ft.lb. See Cover Detail To Trans. Port 3 33 CS0 SERIES PTO EXPLODED VIEW 3 0 9 3 9 3 3 ft.lb. 3 3b 9 3 ft.lb.

More information

AWS PARTS BOOK Claas MaxFlex 1200 Twin Fan Header Mount Models

AWS PARTS BOOK Claas MaxFlex 1200 Twin Fan Header Mount Models Parts Order Information AWS PARTS BOOK Claas MaxFlex 200 Twin Fan Header Mount Models Contact Info: TEMP Farm Equipment Ltd. 3890 Wellington St. Box 269 Mitchell, Ontario, Canada N0K-N0 Phone: -877-348-0066

More information

Illustrated Parts List

Illustrated Parts List Spicer Drive Axles Illustrated Parts List AXIP-0054 March 2014 S110 Model Table of Contents General Information... 2 How To Use Illustrated Parts List... 2 Model Identification... 3 Axle Parts Explode...

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-098B-T June 0 Contents How To Use The Illustrated s List... AUXILIARY DRIVE GEAR... CASE (AUX)... 5 CASE (FRONT)... 8 COUNTERSHAFT & BRGS(AUX)... COUNTERSHAFT

More information

NV3550 TO FORD BRONCO

NV3550 TO FORD BRONCO NV3550 TO 1966-77 FORD BRONCO KIT CONSISTS OF: No. 1. 2. 3. 4. 5. Qty 1 1 Kit 1 Kit 1 Kit 1 Kit Part No. 26-3550 50-9920 712544 716000 716099 Description NV3550 TRANSMISSION TRANSFER CASE ADAPTER & TC

More information

SPICER. WEATHERLYINDEX084 T21 O-ES70-5 October 1993 ES70-5 Series Main Transmission

SPICER. WEATHERLYINDEX084 T21 O-ES70-5 October 1993 ES70-5 Series Main Transmission SPICER WEATHERLYINDEX084 T2 O-ES70-5 October 993 ES70-5 Series Main Transmission ES70-5 Series Main Transmission For parts or service call us Pro Gear & Transmission, Inc. (877) 776-4600 (407) 872-90 parts@eprogear.com

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY

More information

DISCLAIMER 2011, MIDWEST TRUCK & AUTO PARTS, INC. ALL RIGHTS RESERVED.

DISCLAIMER 2011, MIDWEST TRUCK & AUTO PARTS, INC. ALL RIGHTS RESERVED. DISCLAIMER PARTS LISTED IN THIS CATALOG ARE NOT NECESSARILY MANUFACTURED BY THE ORIGINAL EQUIPMENT MANUFACTURER AND ANY REFERENCE TO THE TRADEMARKS OR PART NUMBERS OF OTHERS ARE FOR CROSS REFERENCE INFORMATIONAL

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List FR-50B November 0 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AIR MODULE & RANGE CYL.... 6 AUXILIARY DRIVE GEAR... 8 CASE (AUX)...

More information

Scania Truck Product List

Scania Truck Product List Bailey Morris Ltd Propshaft Manufacturer and Component Distribution BM Part No Universal Joints Part No Description BM99 1111745 Universal Joint 38X148MM P300 Centre Lube - Premium BM542 Universal Joint

More information

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)...

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)... RT-6610 July 2011 Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)... 9 COUNTERSHAFT ASSY... 10 FILTER REGULATOR...

More information

SMALL PARTS J300P-9 AUGUST Replaces J300-P9 Dated April, Revision Log 5/11/06 - Corrected bolt part number for 1710 Series on Page 17

SMALL PARTS J300P-9 AUGUST Replaces J300-P9 Dated April, Revision Log 5/11/06 - Corrected bolt part number for 1710 Series on Page 17 SMALL PARTS AUGUST 2004 Replaces J300-P9 Dated April, 2002 Revision Log 5/11/06 - Corrected bolt part number for 1710 Series on Page 17 SMALL PARTS TABLE OF CONTENTS Balance Weight... 5 Bearing Cap Hardware...

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List FRO-520C June 204 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AIR MODULE & RANGE CYL.... 6 AUXILIARY DRIVE GEAR... 8 CASE (AUX)...

More information

DRIVELINE COMPONENTS CATALOG FLANGE YOKES

DRIVELINE COMPONENTS CATALOG FLANGE YOKES DRIVELINE COMPONENTS CATALOG FLANGE YOKES JANUARY 2008 Supersedes Section 2, Dated April 2005 HOW TO USE THIS CATALOG To identify a Flange Yoke, two pieces of information are needed: 1)..The Design of

More information

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)...

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)... RTLO-22918B July 2011 Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)... 9 COUNTERSHAFT ASSY... 10 FILTER REGULATOR...

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-67A November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... AUXILIARY DRIVE GEAR... 6 CASE (AUX)... 7 CASE (FRONT)... 9 COUNTERSHAFT

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-0B-T November 0 Contents How To Use The Illustrated s List... AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 8 COUNTERSHAFT & BRGS(AUX)... COUNTERSHAFT

More information

FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE DISCOUNT TRACTOR PARTS. Ph

FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE DISCOUNT TRACTOR PARTS. Ph FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE DISCOUNT TRACTOR PARTS Ph 0800 872 272 Email sales@discounttractorparts.co.nz All prices listed are plus GST and subject to change 7B Manga Rd, Silverdale Water

More information

For Discount Tecumseh Engine Parts Call or TVM N Page 1 of 8 Engine Parts List #1

For Discount Tecumseh Engine Parts Call or TVM N Page 1 of 8 Engine Parts List #1 TVM195-150176N Page 1 of 8 Engine Parts List #1 TVM195-150176N Page 2 of 8 Engine Parts List #1 1 35383 Cylinder (Incl. 2 & 20) (3-1/8" Bore) 2 27652 Pin, Dowel 14 28277 Washer, Flat 15 35082 Rod, Governor

More information

GLOBAL DRILLING SOLUTIONS, INC STOCK LIST

GLOBAL DRILLING SOLUTIONS, INC STOCK LIST GLOBAL DRILLING SOLUTIONS, INC STOCK LIST Item Description Qty in Stock Lighting Equipment LED Flood Light. IECEX Certificed. Explosion proof / Zone & ; Ex d IIB T Gb; IP. / Rated voltage: 00 00VAC, 0/0Hz.

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLOF-698B November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT)... 9 CASE

More information

Contents How To Use The Illustrated Parts List... 3 AIR SYSTEM REDUCTION... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT)...

Contents How To Use The Illustrated Parts List... 3 AIR SYSTEM REDUCTION... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT)... RTO-14615 July 2011 Contents How To Use The Illustrated Parts List... 3 AIR SYSTEM REDUCTION... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT)... 8 COUNTERSHAFT & BRGS(AUX)... 10 COUNTERSHAFT

More information

CS24/25 SERIES CLUTCH SHIFT PTO

CS24/25 SERIES CLUTCH SHIFT PTO CS/ SERIES CLUTCH SHIFT PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. CS/ PTO EXPLODED VIEWS Detail B Detail A Detail E Detail C Detail D DETAIL A OUTPUT SHAFT ASSEMBLY 7 CS/ STANDARD OUTPUT

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List FROF-20C November 202 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AIR MODULE & RANGE CYL.... 5 AUXILIARY DRIVE GEAR... 7 CASE

More information

FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE. Updated February 2017 DISCOUNT TRACTOR PARTS

FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE. Updated February 2017 DISCOUNT TRACTOR PARTS FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE Updated February 2017 DISCOUNT TRACTOR PARTS Ph 0800 872 272 Updated February 2017 E mail sales@discounttractorparts.co.nz All prices listed are plus GST and

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTO-690C-AS3 November 0 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 6 CASE (FRONT)...

More information

Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER

Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER PARTS CATALOG Form 46619 Issue 01/06 Sugg. Retail: $15.00 Inside Front Cover (blank) Models 912, 922

More information

Propeller Shaft Coupling

Propeller Shaft Coupling Propeller Shaft Coupling Audi Application PCD (D) OD (N) Bore (S) Bolt Lth (L) Bolt Ø (D) Bolt Qty Application PCD (D) OD (N) Bore (S) Bolt Lth (L) Bolt Ø (D) Bolt Qty AWD 05.00.00 0.00 RC.AUD.00 BMW Application

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,

More information

TRANSMISSION PARTS LIST. Spicer ES43~5. Bulletin No. T210-ES43-5. March 2000

TRANSMISSION PARTS LIST. Spicer ES43~5. Bulletin No. T210-ES43-5. March 2000 TRANSMISSION PARTS LIST Spicer ES43~5 Bulletin No. T20-ES43-5 March 2000 For parts or service call us Pro Gear & Transmission, Inc. (877) 776-4600 (407) 872-90 parts@eprogear.com 906 W. Gore St. Orlando,

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTLO-0B November 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... AUXILIARY DRIVE GEAR... 5 CASE (AUX)... CASE (FRONT)... 9 COUNTERSHAFT

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTO-690B-AS November 0 Contents How To Use The Illustrated s List... 3 AFTERMARKET TRANSMISSIONS... 4 AUXILIARY DRIVE GEAR... 5 CASE (AUX)... 7 CASE (FRONT)...

More information

Illustrated Parts List

Illustrated Parts List More time on the road Illustrated s List RTO-609A June 0 Contents How To Use The Illustrated s List... AFTERMARKET TRANSMISSIONS... AUXILIARY DRIVE GEAR... CASE (AUX)... 6 CASE (FRONT)... 8 COUNTERSHAFT

More information

MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY

MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY HARSH INTERNATIONAL, INC. 600 OAK AVE. EATON, COLORDO 80615-007 MAIN NUMBER: (970) 454-2291 FAX: (970) 454-3491 PRICE: $2.50 PARTS BOOK NUMBER:

More information

ROTARY CUTTERS RC S-0498

ROTARY CUTTERS RC S-0498 ROTARY CUTTERS RC2 3100 S-98 Code: 05091331 Series: S-98 Review: ABRIL/98 ROTARY CUTTER 3100 RC2... 1 CARRYING WHEELS ASSY... 2 DOUBLE DISTRIBUTOR... 3 MULTIPLIER... 4 DRIVE SHAFT... 5 CARDAN 40 X 400

More information

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)...

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)... RT-6609 July 2011 Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COUNTERSHAFT & BRGS(AUX)... 8 COUNTERSHAFT ASSY... 9 FILTER REGULATOR...

More information

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER...

Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER... RTOF-16915 July 2011 Contents How To Use The Illustrated Parts List... 3 AUXILIARY DRIVE GEAR... 4 CASE (AUX)... 5 CASE (FRONT)... 7 COMBINATION CYLINDER... 9 COUNTERSHAFT & BRGS(AUX)... 10 COUNTERSHAFT

More information

Flexplate Conversion Installation Instructions

Flexplate Conversion Installation Instructions Flexplate Conversion Installation Instructions For all Wagner units using Clark 8000 torque converter. Use the following instructions for modifying your ring gear torque converter to a fl explate torque

More information

Model 306B H&J Transfer Case Service Manual

Model 306B H&J Transfer Case Service Manual Model 306B H&J Transfer Case Service Manual For innovation using today s technology in demanding situations call: Phone: (877) 327-2116 Fax: (586) 601-1904 e-mail: info@mixerandplantparts.com Mixer & Plant

More information

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0

More information

Contents How To Use The Illustrated Parts List... 3 CASE... 4 COUNTERSHAFT ASSY... 7 INPUT SHAFT... 8 KITS & ASSEMBLIES... 9 LEVER ASSY...

Contents How To Use The Illustrated Parts List... 3 CASE... 4 COUNTERSHAFT ASSY... 7 INPUT SHAFT... 8 KITS & ASSEMBLIES... 9 LEVER ASSY... FSO-8406A July 2011 Contents How To Use The Illustrated Parts List... 3 CASE... 4 COUNTERSHAFT ASSY... 7 INPUT SHAFT... 8 KITS & ASSEMBLIES... 9 LEVER ASSY... 10 MAINSHAFT ASSY... 12 MISCELLANEOUS... 14

More information

EURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE. Tel: +44 (0)

EURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE.   Tel: +44 (0) COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE email: sales@euro-bearings.com Tel: +44 (0)1908 511733 2015 CATALOGUE CONTENTS COMBINED ROLLER BEARINGS Standard CR Bearings Eccentric Adjustable

More information

Highline Manufacturing TopGun 1999 Page 1 A. TABLE OF CONTENTS... 1

Highline Manufacturing TopGun 1999 Page 1 A. TABLE OF CONTENTS... 1 Highline Manufacturing TopGun 1999 Page 1 A. Table of Contents A. TABLE OF CONTENTS... 1 B. ASSEMBLY & INSTALLATIONS... 3 1. FLAIL DRUM ASSEMBLY... 3 2. FLAIL DRUM INSTALLATION... 4 3. FEED ROLLER ASSEMBLY...

More information