8.0 NON-MnDOT PRICE SCHEDULE SANDER. Falls 1ASD Tailgate 6 & 9" Sanders 1.0 (Stainless Steel) TOTAL PRICE: See Attached Schedule 8.

Size: px
Start display at page:

Download "8.0 NON-MnDOT PRICE SCHEDULE SANDER. Falls 1ASD Tailgate 6 & 9" Sanders 1.0 (Stainless Steel) TOTAL PRICE: See Attached Schedule 8."

Transcription

1 Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Address: Bert's Truck Equipment of Moorhead, Inc Jim McLaughlin 3804 Hwy 75 North PO Box 336 Moorhead, MN Item # Information Requested Answer Sander - Make and Model Falls 1ASD Tailgate 6 & 9" Sanders 1.0 (Stainless Steel) 2.0 Type of Sander Under tailgate Center line or right side discharge 3.0 Warranty Information 2 Years from in service date TOTAL PRICE: See Attached Schedule List Volume Discounts See Attached Schedule Spec # Description See Attached Schedule Installation of Sander List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use asmany numbers as needed. See Attached Schedule $ Cost per Loaded Mile for Delivery of Sander $ 2.00 Starting Point: City, State, Zip: Moorhead, MN or Little Falls, MN

2 Bert's Truck Equipment of Moorhead, Inc 8.0-1Price Schedule for Falls Sanders 11-Jun-18 Falls Tailgate Spreaders (1) Falls 1ASD-6CD-SS 6" Stainless Steel Tailgate Spreader $ 3, (2) Falls 1ASD-6CD-SS 6" Stainless Steel Tailgate Spreader (10 or more on Single order, Each) $ 3, (3) Falls 1ASD-6CDLM-SS 6" Stainless Steel Salt Special Spreade $ 4, Falls 1ASD-6CDLM-SS 6" Stainless Steel Salt Special Spreader, (4) (10-19 on Single order, Each) $ 4, (5) Falls 1ASD-6CDLM-SS 6" Stainless Steel Salt Special Spreader, (20+ on Single order, Each) $ 4, (6) Falls 1ASD-SS 9" Stainless Steel Tailgate Spreader (includes berm chute and Poly Spinner) $ 4, (7) Falls 1ASD-SS 9" MN DOT Stainless Steel Tailgate Spreader $ 4, (8) (Qyt on a single order each )(includes berm chute and P Falls l S 1ASD-SS i ) 9" MN DOT Stainless Steel Tailgate Spreader Qyt 20+ on a single order each) (includes berm chute and Poly $ 4, S i ) 8.1 (1) Installation of Stainless Steel Sander at Bert's Truck Equipme $ Installtion of Dual Spinner sanders at Berts $ 1, (2) Installation of Stainless Steel Sander at Little Falls Machine $ 1, Options 8.20 Dual Spinner Option $ A Dual Spiiner Option, MN DOT (Qty 10+ Price, Each) $ B Dual Spiiner Option, MN DOT (Qty 20+ Price, Each) $ Dual flow control valve (if not included in Hydraulics) $ Standard Spill shields $ Steel Spill shields for Elliptical Dump Bodies $ Stainless Steel Spill shields for Elliptical Dump Bodies $ Delete berm chute (9 sander) $ (88.00) 8.27 If anti flow cover if not needed $ (56.00) " Auger Flighting on 9" sander ILO 6" $ Body Manifold plate/box for sander connections LH or RH $ Short Hose Kit (included in all Hydraulic Installations) $ Quick Couplers (included in all hydraulic installations) $ Inbound shipping Lttle Falls, MN to Moorhead, MN $ Optional controls (see optional hydraulics and options) VENDOR Bert's Truck Equipment Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN PHONE NO TOLL FREE FAX NO ADDRESS : jimmc@bertsonline.com

3 Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Address: Bert's Truck Equipment of Moorhead, Inc Jim McLaughlin 3804 Hwy 75 North PO Box 336 Moorhead, MN Item # Information Requested Answer Sander - Make and Model Swenson Tailgate 6 & 9" Sanders 1.0 (Carbon & Stainless Steel) 2.0 Type of Sander Under tailgate Center line discharge 3.0 Warranty Information 2 Years from in service date TOTAL PRICE: See Attached Schedule List Volume Discounts See Attached Schedule Spec # Description See Attached Schedule Installation of Sander List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use asmany numbers as needed. See Attached Schedule $ Cost per Loaded Mile for Delivery of Sander $ 2.00 Starting Point: City, State, Zip: Moorhead, MN 56560

4 Bert's Truck Equipment of Moorhead, Inc Price Schedule for Swenson Sanders 11-Jun-18 Swenson Tailgate Spreaders (1) Swenson Model SAD 6" Carbon Steel (Powered Coated Orange) $ 2, (2) Swenson Model SADS, 304 stainless steel $ 3, (3) Swenson Model SBD-9 Carbon Steel (Powered Coated Orange) w/berm chute $ 3, (4) Swenson Model SBD-9S, 304 stainless steel $ 4, (5) Swenson Model STCC Cross Conveyor spreader Carbon Steel (Powered Coated Orange) $ 6, (6) Swenson Model STCCS, Cross Conveyor spreader 304 stainless $ 9, (1) Installation of Swenson Sander at Bert's Truck Equipment $ Options 8.20 Reversing Valve $ Spinner Assembly $ 2, Storage Legs $ 2, ' Motorized Extension $ 4, " Extension Chute $ Light Bar $ 1, Standard Spill shields $ Steel Spill shields for Elliptical Dump Bodies $ Stainless Steel Spill shields for Elliptical Dump Bodies $ Manifold plate/box for sander connections $ Short Hose Kit (included in all Hydraulic Installations) $ Quick Couplers (included in all hydraulic installations) $ Optional controls (see optional hydraulics and options) VENDOR Bert's Truck Equipment Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN PHONE NO TOLL FREE FAX NO ADDRESS : jimmc@bertsonline.com

5 Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Address: Bert's Truck Equipment of Moorhead, Inc Jim McLaughlin 3804 Hwy 75 North PO Box 336 Moorhead, MN Item # Information Requested Answer Sander - Make and Model Swenson V-box Spreaders Hydraulic & 1.0 Electric 2.0 Type of Sander V-Box Hydraulic Insert Sanders 3.0 Warranty Information 2 Years from in service date TOTAL PRICE: See Attached Schedule List Volume Discounts See Attached Schedule Spec # Description See Attached Schedule Installation of Sander List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use asmany numbers as needed. See Attached Schedule $ Cost per Loaded Mile for Delivery of Sander $ 2.00 Starting Point: City, State, Zip: Moorhead, MN 56560

6 Bert's Truck Equipment of Moorhead, Inc Price Schedule for Swenson V-Box Spreaders 11-Jun-18 EV100 Series Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends or 12 ga Stainless Steel 82" wide hopper, 56" side Hieght 7 gauge slotted longitudinals for easy gearbox/drive shaft removal (10ga On SS Models) 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 1 1/2" drive shaft, 1 1/4" idler shaft, spring loaded chain take up 7 gauge bolt in replaceable conveyor floor (10 ga on SS Models) Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 1/4" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange (carbon steel Units) An optional inverted vee is recommended on hoppers over 12' in length or 62" in height Gear Box Ratio: 25:1, 6 tooth Sprocket, 1/4" thick Crossbars 18" Spinner Disk, Bottom Mount Motor Carbon Steel Spreaders (1) 8 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7, (2) 9 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7, (3) 10 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7, (4) 11 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (5) 12 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (6) 13 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 9, (7) 14 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 10, (8) 15 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 10, Stainless Steel Spreaders (9) 8 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10, (10) 9 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10, (11) 10 ft Swenson EV 100 V box Spreader, Stainless Steel $ 11, (12) 11 ft Swenson EV 100 V box Spreader, Stainless Steel $ 11, (13) 12 ft Swenson EV 100 V box Spreader, Stainless Steel $ 12, (14) 13 ft Swenson EV 100 V box Spreader, Stainless Steel $ 12, (15) 14 ft Swenson EV 100 V box Spreader, Stainless Steel $ 13, (16) 15 ft Swenson EV 100 V box Spreader, Stainless Steel $ 13, The following items are not stainless steel: top screens, spinner disc/fins, conveyor chain, sprockets, gearbox, gatejack, drive shaft, idler shaft, and hydraulic motors. Stainless steel units are not painted. Note: Recommended material size is 1/2" or smaller. EV150 Series Hydraulic driven spreader

7 Manufactured of 10 gauge carbon steel sides/ends or 12 ga Stainless Steel 82" wide hopper, 56" side Hieght 7 gauge slotted longitudinals for easy gearbox/drive shaft removal (10ga On SS Models) 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 2" drive shaft, 2" idler shaft, spring loaded chain take up to the rear 7 gauge bolt in replaceable conveyor floor (10 ga on SS Models) Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 3/8" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 2 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange (carbon steel Units) An optional inverted vee is recommended on hoppers over 12' in length or 62" in height Gear Box Ratio: 50:1, 8 tooth Sprocket, 3/8" thick Crossbars 20" Spinner Disk, Top Mount Motor Carbon Steel Spreaders (17) 8 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 9, (18) 9 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 9, (19) 10 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 9, (20) 11 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 10, (21) 12 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 10, (22) 13 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 11, (23) 14 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 12, (24) 15 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 12, Stainless Steel Spreaders (25) 8 ft Swenson EV 150 V box Spreader, Stainless Steel $ 13, (26) 9 ft Swenson EV 150 V box Spreader, Stainless Steel $ 14, (27) 10 ft Swenson EV 150 V box Spreader, Stainless Steel $ 14, (28) 11 ft Swenson EV 150 V box Spreader, Stainless Steel $ 15, (29) 12 ft Swenson EV 150 V box Spreader, Stainless Steel $ 15, (30) 13 ft Swenson EV 150 V box Spreader, Stainless Steel $ 16, (31) 14 ft Swenson EV 150 V box Spreader, Stainless Steel $ 17, (32) 15 ft Swenson EV 150 V box Spreader, Stainless Steel $ 17, The following items are not stainless steel: top screens, spinner disc/fins, conveyor chain, sprockets, gearbox, gatejack, drive shaft, idler shaft, and hydraulic motors. Stainless steel units are not painted. Note: Recommended material size is 1/2" or smaller. EVA 100 Series Single and Dual Auger Spreaders Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends, or 12 Ga Stainless Steel 84" wide hopper 45 degree side slope 54"

8 Bolt in 6" wide flange (H) beam Drop N Loc top screens 7 gauge bolt in replaceable conveyor floor 7" diameter hard surfaced auger with 3 pitch lengths for even unloading front to back Direct drive 18 HP hydraulic motor 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Side swing up spinner assembly for easy unloading and storage Rear grease extension Inverted vee Powder coated Omaha Orange Spinner Disc: 18" Mild Steel Motor Mount: Bottom Carbon Steel (33) 8 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 9, (34) 9 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 9, (35) 10 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10, (36) 11 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10, (37) 12 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10, (38) 13 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 11, (39) 14 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 12, (40) 15 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10, (41) 8 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 14, (42) 9 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 14, (43) 10 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 15, (44) 11 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 15, (45) 12 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 16, (46) 13 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 17, (47) 14 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 17, (48) 15 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 18, (49) Upcharge for Dual Auger ILO Single Auger $ 1, VBEL Series Electric V-Box Spreader Electrically driven spreader Manufactured of 10 gauge carbon steel sides/ends 82" wide hopper 7 gauge slotted longitudinals for easy gearbox/drive shaft removal 45 degree side slope Bolt in 6" wide flange (H) beam

9 Drop N Loc top screens 1 1/2" drive shaft, 1 1/4" idler shaft, spring loaded chain take up 7 gauge bolt in replaceable conveyor floor Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 1/4" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange Standard inverted vee on all spreaders 2 motor variable speed controller Standard flip up spinner Wiring harness included All standard v-box options available Chain Drive Motor: 1/2 HP Spinner Motor:1/2 HP Cross Bars:1/4" thick (50) 10 ft Swenson VBEL Electric V box Spreader, Carbon Steel, Factory Ora $ 14, (51) 12 ft Swenson VBEL Electric V box Spreader, Carbon Steel, Factory Ora $ 15, (52) 10 ft Swenson VBEL Electric V box Spreader, Stainless Steel $ 19, (53) 12 ft Swenson VBEL Electric V box Spreader, Stainless Steel $ 21, Installtion of V Box Sanders 8.10 (1) Installtion of Hydraulic V- Box sanders $ (2) Installtion of Electric V- Box sanders $ Options for Options For Swenson Hydraulic and Electric V- Box Spreaders 18 HP Kolher Gas Engine Package 8.20 EVRGH (carbon steel Units) $ 5, EVRGH- SS (Stainless Steel units $ 7, Leg Stands Carbon Steel FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 3, FT $ 3, FT $ 3, FT $ 4, Factory Installation of Leg Stand $ Leg Stands Stainless Steel FT $ 4, FT $ 4, FT $ 4,701.00

10 FT $ 4, FT $ 5, FT $ 5, FT $ 5, FT $ 5, FT $ 4, Factory Installation of Leg Stand $ Inverted Vee (Carbon Steel) FT $ FT $ FT $ FT $ & 13 FT $ FT $ FT $ Inverted Vee (Stainless Steel) FT $ FT $ FT $ FT $ & 13 FT $ FT $ FT $ Rubber Side Shield (Carbon) FT $ FT $ FT $ FT $ FT $ 1, FT $ 1, FT $ 1, Rubber Side Shield (Stainless) FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, Hydraulic Hose Kits ' thru 11' $ 1, ' thru 15' $ 1, Dual Motor Short Hose Kit $

11 8.65 Single Motor HYD Hose Kit up to 11' $ Single Motor Short Hose Kit $ Single Flow Control Valve (Fluid Contrl) $ Dual Flow Control Valve (Fluid Control) $ Valve Stand Kit $ Reservoir Kits GAL RESERVOIR KIT $ GAL RESERVOIR KIT $ 1, STAINLESS STEEL LIGHT BAR 8.72 Stop, Turn, Tail Lights $ 1, Stop, Turn, Tail & Flashing Lights $ 1, Stop, Turn, Tail & Strobe Lights $ 1, Stop, Turn, Tail & Back UP Lights $ 1, " Pedestal Mount Work Light $ ACCESSORIES 8.77 Chassis Mtg Kit 8' - 11'- v-box length $ Chassis Mtg Kit 12' - 15'- v-box length $ Slip In Nylon Strap Kit (4 total) $ Slip In Nylon Strap Kit (4 total SS Mtg) $ Tailgate Latch $ SS Tailgate Latch kit $ Frnt Bearing Grease Ext. to Rear Manifld $ Chain Oiler, Gravity (1 gal capacity) $ Chain Oiler SS, Gravity (1 gal capacity) $ Chain Oiler Poly Tank, Gravity (1 gal capacity) $ Spill Shield, 8" Overhang, 80" Width $ Spill Shield SS, 8" Overhang, 80" Width $ Spill Shield, 12" Overhang, 80" Width $ Spill Shield SS, 12" Overhang, 80" Width $ Full Cabshield 80" Width $ Full Cabshield SS 80" Width $ 1, Winch for Swing Up Spinner Assembly $ Winch for Side Swing Up Spinner Assy $ Observation Platform $ Observation Platform (Stainless Steel) $ 1, Observation Platform for Units 64" or Higher $ Observation Platform SS for Units 64" or Higher $ 1, Catwalks (Carbon Bodies) & 9 FT $ & 11 FT $

12 & 13 FT $ & 15 FT $ 1, Catwalks (Stainless Steel Bodies) & 9 FT $ 1, & 11 FT $ 2, & 13 FT $ 2, & 15 FT $ 2, Swenson V-Box Spreader Upcharges ILO Standard Equipment Low Temp Belt over Chain FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 3, FT $ 3, FT $ 3, FT $ 4, /8" CROSSBAR in lieu of 1/4" FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ CROSSBAR EVERY LINK FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ BELT SEALERS FT $ FT $ FT $ FT $ FT $ FT $ HEAVY DUTY TOP SCREENS LATERAL BARS FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ 1, FT $ 1,109.00

13 STAINLESS STEEL TOP SCREENS FT $ 1, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 3, FT $ 3, METAL SIDE SPILL SHIELDS (2 per) FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ STAINLESS STEEL SIDE SPILL SHIELDS (2 per) FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ 1, ROLLER CHAIN & 10 FT $ & 12 FT $ & 14 FT $ GAUGE SS FLOOR FT $ FT $ FT $ FT $ FT $ FT $ FROM 12 GA STAINLESS STEEL to 10 GA SS FT $ FT $ FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1,910.00

14 DEDUCT: TOP SCREEN FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ Swenson PPSII Percision Placement System $ 5, VENDOR Bert's Truck Equipment, Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN PHONE NO TOLL FREE FAX NO ADDRESS jimmc@bertsonline.com

15 Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Address: Bert's Truck Equipment of Moorhead, Inc Jim McLaughlin 3804 Hwy 75 North PO Box 336 Moorhead, MN Item # Information Requested Answer Sander - Make and Model Bonnell V-box Spreaders, Hydraulic & 1.0 Electric 2.0 Type of Sander V-Box Hydraulic Insert Sanders 3.0 Warranty Information 2 Years from in service date TOTAL PRICE: See Attached Schedule List Volume Discounts See Attached Schedule Spec # Description See Attached Schedule Installation of Sander List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use asmany numbers as needed. See Attached Schedule $ Cost per Loaded Mile for Delivery of Sander $ 2.00 Starting Point: City, State, Zip: Moorhead, MN 56560

16 CODE # Bert's Truck Equipment of Moorhead, Inc Price Schedule for Bonnell V-Box Spreaders 1-Jun-18 DESCRIPTION BONNELL PINTLE CHAIN CONVEYOR BOTTOM V-BOX MATERIAL SPREADER WITH ADJUSTABLE FEEDGATE, 201 STAINLESS STEEL CONSTRUCTION, 12 GA. SIDES, 10 GA. LONGSILLS, 50:1 WORM GEARBOX, 1-1/2" DRIVE AND IDLER, 667X CONVEYOR CHAING WITH BAR FLIGHT EVERY OTHER LINK, SPRING LOADED IDLER ASSEMBLY, TOP SCREENS AND SWING UP SPINNER ASSEMBLY Bert's Contract price BV-0850-S2 8' LONG, X 50" TALL, 4.3 CUBIC YARD CAPACITY $ 12, BV-0856-S2 8' LONG, X 56" TALL, 5.3 CUBIC YARD CAPACITY $ 12, BV-0862-S2 8' LONG, X 62" TALL, 6.3 CUBIC YARD CAPACITY $ 12, BV-0868-S2 8' LONG, X 68" TALL, 7.3 CUBIC YARD CAPACITY $ 12, BV-0950-S2 9' LONG, X 50" TALL, 5.4 CUBIC YARD CAPACITY $ 12, BV-0956-S2 9' LONG, X 56" TALL, 6 CUBIC YARD CAPACITY $ 12, BV-0962-S2 9' LONG, X 62" TALL, 7.1 CUBIC YARD CAPACITY $ 13, BV-0968-S2 9' LONG, X 68" TALL, 8.2 CUBIC YARD CAPACITY $ 13, BV-1050-S2 10' LONG, X 50" TALL, 5.5 CUBIC YARD CAPACITY $ 13, BV-1056-S2 10' LONG, X 56" TALL, 6.7 CUBIC YARD CAPACITY $ 13, BV-1062-S2 10' LONG, X 62" TALL, 8 CUBIC YARD CAPACITY $ 13, BV-1068-S2 10' LONG, X 68" TALL, 9.2 CUBIC YARD CAPACITY $ 13, BV-1150-S2 11' LONG, X 50" TALL, 6 CUBIC YARD CAPACITY $ 14, BV-1156-S2 11' LONG, X 56" TALL, 7.4 CUBIC YARD CAPACITY $ 13, BV-1162-S2 11' LONG, X 62" TALL, 8.8 CUBIC YARD CAPACITY $ 13, BV-1168-S2 11' LONG, X 68" TALL, 10.2 CUBIC YARD CAPACITY $ 14, BV-1250-S2 12' LONG, X 50" TALL, 6.6 CUBIC YARD CAPACITY $ 14, BV-1256-S2 12' LONG, X 56" TALL, 8.1 CUBIC YARD CAPACITY $ 14, BV-1262-S2 12' LONG, X 62" TALL, 9.6 CUBIC YARD CAPACITY $ 14, BV-1268-S2 12' LONG, X 68" TALL, 11.2 CUBIC YARD CAPACITY $ 14, BV-1350-S2 13' LONG, X 50" TALL, 7.2 CUBIC YARD CAPACITY $ 14, BV-1356-S2 13' LONG, X 56" TALL, 8.8 CUBIC YARD CAPACITY $ 15, BV-1362-S2 13' LONG, X 62" TALL, 10.4 CUBIC YARD CAPACITY $ 15, BV-1368-S2 13' LONG, X 68" TALL, 12.2 CUBIC YARD CAPACITY $ 15, BV-1450-S2 14' LONG, X 50" TALL, 7.7 CUBIC YARD CAPACITY $ 15, BV-1456-S2 14' LONG, X 56" TALL, 9.5 CUBIC YARD CAPACITY $ 15, BV-1462-S2 14' LONG, X 62" TALL, 11.2 CUBIC YARD CAPACITY $ 16, BV-1468-S2 14' LONG, X 68" TALL, 13.2 CUBIC YARD CAPACITY $ 16, BV-1550-S2 15' LONG, X 50" TALL, 8.3 CUBIC YARD CAPACITY $ 16, BV-1556-S2 15' LONG, X 56" TALL, 10.2 CUBIC YARD CAPACITY $ 16, BV-1562-S2 15' LONG, X 62" TALL, 12.1 CUBIC YARD CAPACITY $ 16, BV-1568-S2 15' LONG, X 68" TALL, 14.2 CUBIC YARD CAPACITY $ 16, BV-1650-S2 16' LONG, X 50" TALL, 8.8 CUBIC YARD CAPACITY $ 17, BV-1656-S2 16' LONG, X 56" TALL, 10.9 CUBIC YARD CAPACITY $ 17, BV-1662-S2 16' LONG, X 62" TALL, 12.9 CUBIC YARD CAPACITY $ 18, BV-1668-S2 16' LONG, X 68" TALL, 15.2 CUBIC YARD CAPACITY $ 18,381.00

17 BV-1750-S2 17' LONG, X 50" TALL, 9.4 CUBIC YARD CAPACITY $ 19, BV-1756-S2 17' LONG, X 56" TALL, 11.5 CUBIC YARD CAPACITY $ 19, BV-1762-S2 17' LONG, X 62" TALL, 13.7 CUBIC YARD CAPACITY $ 19, BV-1768-S2 17' LONG, X 68" TALL, 16.2 CUBIC YARD CAPACITY $ 19, BV-1850-S2 18' LONG, X 50" TALL, 9.9 CUBIC YARD CAPACITY $ 20, BV-1856-S2 18' LONG, X 56" TALL, 12.2 CUBIC YARD CAPACITY $ 20, BV-1862-S2 18' LONG, X 62" TALL, 14.5 CUBIC YARD CAPACITY $ 21, BV-1868-S2 18' LONG, X 68" TALL, 17.2 CUBIC YARD CAPACITY $ 21, BV-1950-S2 19' LONG, X 50" TALL, 10.5 CUBIC YARD CAPACITY $ 22, BV-1956-S2 19' LONG, X 56" TALL, 12.9 CUBIC YARD CAPACITY $ 22, BV-1962-S2 19' LONG, X 62" TALL, 15.3 CUBIC YARD CAPACITY $ 22, BV-1968-S2 19' LONG, X 68" TALL, 18.1 CUBIC YARD CAPACITY $ 22, BV-2050-S2 20' LONG, X 50" TALL, 11.1 CUBIC YARD CAPACITY $ 24, BV-2056-S2 20' LONG, X 56" TALL, 13.6 CUBIC YARD CAPACITY $ 24, BV-2062-S2 20' LONG, X 62" TALL, 16.2 CUBIC YARD CAPACITY $ 24, BV-2068-S2 20' LONG, X 68" TALL, 19.1 CUBIC YARD CAPACITY $ 25, BV-2150-S2 21' LONG, X 50" TALL, 11.6 CUBIC YARD CAPACITY $ 26, BV-2156-S2 21' LONG, X 56" TALL, 14.3 CUBIC YARD CAPACITY $ 26, BV-2162-S2 21' LONG, X 62" TALL, 17 CUBIC YARD CAPACITY $ 26, BV-2168-S2 21' LONG, X 68" TALL, 20.1 CUBIC YARD CAPACITY $ 26, BV-2250-S2 22' LONG, X 50" TALL, 12.2 CUBIC YARD CAPACITY $ 28, BV-2256-S2 22' LONG, X 56" TALL, 15 CUBIC YARD CAPACITY $ 28, BV-2262-S2 22' LONG, X 62" TALL, 17.8 CUBIC YARD CAPACITY $ 28, BV-2268-S2 22' LONG, X 68" TALL, 21.1 CUBIC YARD CAPACITY $ 28, MATERIAL GAUGE UPGRADES FOR V-BOX SPREADERS- ALL 201 STAINLESS 10 GA. SIDES, 7 GA. LONGSILLS IN LIEU OF 12 GA. AND 10 GA. V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, GA FLOOR IN LIEU OF 10 GA. V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $

18 V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V ' BODY LENGTH $ V-BOX CONVEYOR CHAIN OPTIONS -CHAIN BAR FLIGHT EVERY LINK V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V ' CONVEYOR WITH 3/8X1-1/2 CHAIN BAR FLIGHT EVERY LINK $ V-BOX CONVEYOR CHAIN OPTIONS -BELT OVER CHAIN (COLD BELT) V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 1, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 1, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 1, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 1, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 2, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 2, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 2, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 2, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 2, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 2, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 3, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 3, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 3, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 3, V ' CONVEYOR WITH BELT OVER CHAIN FOR COLD MATERIAL $ 3, V-BOX CONVEYOR CHAIN OPTIONS -INVERTED VEE OVER CONVEYOR V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $

19 V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ 1, V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ 1, V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ 1, V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ 1, V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ 1, V ' SPREADER BODY LENGTH, 201 STAINLESS MATERIAL $ 1, STAINLESS STEEL CATWALKS FOR CHASSIS MOUNTED UNITS V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 2, V ' BODY LENGTH $ 3, RUBBER SPILL SHIELDS- SIDE MOUNTED TO KEEP DEBRIS OUT OF DUMP BODY AND OFF THE SIDES OF THE BODY. V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, V ' BODY LENGTH $ 1, GALVANIZED SKID TYPE LEG STORAGE STANDS V ' BODY LENGTH $ 3, V ' BODY LENGTH $ 3, V ' BODY LENGTH $ 3, V ' BODY LENGTH $ 4, V ' BODY LENGTH $ 4, V ' BODY LENGTH $ 4, V ' BODY LENGTH $ 5,204.00

20 V ' BODY LENGTH $ 5, STAINLESS STEEL SKID TYPE LEG STORAGE STANDS V ' BODY LENGTH $ 5, V ' BODY LENGTH $ 5, V ' BODY LENGTH $ 6, V ' BODY LENGTH $ 6, V ' BODY LENGTH $ 7, V ' BODY LENGTH $ 8, V ' BODY LENGTH $ 8, V ' BODY LENGTH $ 9, INTEGRAL LEG STORAGE STANDS V11830 GALVANIZED FOR ANY SPREADER UP TO 16' $ 3, V11835 STAINLESS STEEL FOR ANY SPREADER UP TO 16' $ 3, V-BOX CONVEYOR CHAIN OPTIONS -OTHER OPTIONS V10630 AUTOMATIC GRAVITY FED CHAIN OILER $ V10635 Rear take up kit for adjusting front bearings $ V10640 GREASE EXTENSION KIT $ V11470 Nylon ratchet strap kit with stainless steel mounting hardware $ V11495 Carbon Steel Tailgate latch kit $ V11610 Stainless Ladder Installed $ V11615 Stainless Ladder Shipped loose $ V Pulse external feedback sensor $ 1, V Pulse external feedback sensor $ 1, V Pulse internal feedbaack sensor $ V11450 Sloped Front without a Dog House $ V11455 Sloped Front with a Dog House $ V11460 Dog House only with no Sloped Front $ V Stainless bolt on Cab Shield $ 1, V Stainless Front Slope Shield $ V Stainless Rear Slope Shield $ V " 201 Stainless 6 fin Disc IN LIEU OF 18" CARBON DISC $ V " 201 Stainless 6 fin Disc IN LIEU OF 18" CARBON DISC $ V " Polyurethane 6 fin Disc IN LIEU OF 18" CARBON DISC $ V " Polyurethane 6 fin Disc IN LIEU OF 18" CARBON DISC $ V " Polyurethane 6 fin Disc IN LIEU OF 18" CARBON DISC $ V12670 Unloader/Diverter Chute $ V12675 Short Hose Kit $ V12685 Winch kit for swing up spinner assist $ V12750 Poly Light Bar with Stop/Turn/Tail Lights $ V12755 Poly Light Bar with Stop/Turn/Tail Lights and Backup Lights $ V12760 Poly Light Bar with Stop/Turn/Tail Lights and LED yellow flashers $ V12765 Stainless Light Bar with Stop/Turn/Tail Lights $ 1, V12770 Stainless Light Bar with Stop/Turn/Tail Lights and Backup Lights $ 1, V12775 Stainless Light Bar with Stop/Turn/Tail Lights and LED yellow flashers $ 1, V12780 One North American WLEDWD-5S worklite 1200 lumens $ Bert's Installtion of Bonnell V Box Spreader $

21 V-BOX PREWET TANK SYSTEM-INCLUDES TANKS AND BRACKETS AND BASIC PLUMBING KIT. DOES NOT INCLUDE PUMP, CONTROLS OR NOZZLES. STANDARD PLUMBING IS 1-1/2", PRICE INCLUDES INSTALLATION TANK SYSTEMS FOR V-BOXES WITH NO LEG STANDS VBPW-125-NLS 125 GALLON SINGLE TANK SYSTEM, ALL LENGTHS $ 1, VBPW-150-NLS 150 GALLON SINGLE TANK SYSTEM, ALL LENGTHS $ 2, VBPW-190-NLS 190 GALLON SINGLE TANK SYSTEM, 10' BODY AND UP $ 2, VBPW-250-NLS 250 GALLON DOUBLE TANK SYSTEM, ALL LENGTHS $ 3, VBPW-300-NLS 300 GALLON DOUBLE TANK SYSTEM, ALL LENGTHS $ 3, VBPW-380-NLS 380 GALLON DOUBLE TANK SYSTEM, 10' BODY AND UP $ 3, VBPW-500-NLS 500 GALLON FOUR TANK SYSTEM, 14' BODY AND UP $ 5, VBPW-550-NLS 550 GALLON FOUR TANK SYSTEM, 14' BODY AND UP $ 5, VBPW-600-NLS 600 GALLON FOUR TANK SYSTEM, 16' BODY AND UP ON BV SPREADERS, 14' AND UP ON BV*A SPREADERS $ 5, VBPW-680-NLS 680 GALLON FOUR TANK SYSTEM, 18' BODY AND UP $ 5, VBPW-760-NLS 760 GALLON FOUR TANK SYSTEM, 20' BODY AND UP $ 6, TANK SYSTEMS FOR V-BOXES WITH FULL FRAME LEG STAND KITS VBPW-125-FFLS 125 GALLON SINGLE TANK SYSTEM, ALL LENGTHS $ 1, VBPW-150-FFLS 150 GALLON SINGLE TANK SYSTEM, ALL LENGTHS $ 2, VBPW-190-FFLS 190 GALLON SINGLE TANK SYSTEM, 10' BODY AND UP $ 2, VBPW-250-FFLS 250 GALLON DOUBLE TANK SYSTEM, ALL LENGTHS $ 3, VBPW-300-FFLS 300 GALLON DOUBLE TANK SYSTEM, ALL LENGTHS $ 3, VBPW-380-FFLS 380 GALLON DOUBLE TANK SYSTEM, 10' BODY AND UP $ 3, VBPW-500-FFLS 500 GALLON FOUR TANK SYSTEM, 14' BODY AND UP $ 5, VBPW-550-FFLS 550 GALLON FOUR TANK SYSTEM, 14' BODY AND UP $ 5, VBPW-600-FFLS 600 GALLON FOUR TANK SYSTEM, 16' BODY AND UP ON BV SPREADERS, 14' AND UP ON BV*A SPREADERS $ 5, VBPW-680-FFLS 680 GALLON FOUR TANK SYSTEM, 18' BODY AND UP $ 5, VBPW-760-FFLS 760 GALLON FOUR TANK SYSTEM, 20' BODY AND UP $ 6, TANK SYSTEMS FOR V-BOXES WITH INTEGRAL LEG STAND KITS VBPW-125-ILS 125 GALLON SINGLE TANK SYSTEM, 14' BODY AND UP $ 1, VBPW-150-ILS 150 GALLON SINGLE TANK SYSTEM, 14' BODY AND UP $ 2, VBPW-190-ILS 190 GALLON SINGLE TANK SYSTEM, 16' BODY AND UP $ 2, VBPW-250-ILS 250 GALLON DOUBLE TANK SYSTEM, 14' BODY AND UP $ 3, VBPW-300-ILS 300 GALLON DOUBLE TANK SYSTEM, 14' BODY AND UP $ 3, VBPW-380-ILS 380 GALLON DOUBLE TANK SYSTEM, 16' BODY AND UP $ 3, PREWET PUMP KIT OPTIONS BON-FG-EPU-ECL FIBERGLASS ENCLOSURE, ELECTRIC PUMP, CLOSED LOOP $ 1, BON-FG-EPU-EM FIBERGLASS ENCLOSURE, ELECTRIC PUMP, OPEN LOOP $ BON-SS-HPU-HCL STAINLESS STEEL ENCLOSURE, HYDRAULIC PUMP, CLOSED LOOP $ 2, BON-SS-HPU-HOL STAINLESS STEEL ENCLOSURE, HYDRAULIC PUMP, OPEN LOOP $ 1, BON-SS-HPUHSOL4 STAINLESS STEEL ENCLOSURE, HYDRAULIC PUMP, OPEN LOOP, USES WASTE OIL $ 2, PREWET OTHER OPTIONS *ADDITIONAL 1-1/2" CADDITIONAL 1-1/2" CROSS FILL KIT $ *LOW LEVEL LOW LIQUID LEVEL SWITCH $ *2 INCH PLUMBING KI IN LIEU OF 1-1/2" $ 69.00

22 *ADDITIONAL 2" CROSADDITIONAL 2" CROSS FILL KIT (REQUIRES 2" PLUMBING KIT AS WELL) $ *1-1/2" MALE QUICKF 1-1/2" MALE QUICKFILL KIT $ *1-1/2" FEMALE QUICK1-1/2" FEMALE QUICKFILL KIT $ *FLUSH KIT FLUSH KIT $ *TWO NOZZLE KIT TWO NOZZLE SPRAY KIT $ *THREE NOZZLE KIT THREE NOZZLE SPRAY KIT $ *2" MALE QUICKFILL K 2" MALE QUICK FILL KIT $ *2" FEMALE QUICKFILL2" FEMALE QUICK FILL KIT $

23 Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Address: Bert's Truck Equipment of Moorhead, Inc Jim McLaughlin 3804 Hwy 75 North PO Box 336 Moorhead, MN Item # Information Requested Answer 1.0 Sander - Make and Model Bonnell Undertailgate Spreaders 2.0 Type of Sander Under tailgate Center line or right side discharge 3.0 Warranty Information One years from in service date TOTAL PRICE: See Attached Schedule List Volume Discounts See Attached Schedule Spec # Description See Attached Schedule Installation of Sander List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use asmany numbers as needed. See Attached Schedule $ Cost per Loaded Mile for Delivery of Sander $ 2.00 Starting Point: City, State, Zip: Moorhead, MN 56560

24 Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Address: Bert's Truck Equipment of Moorhead, Inc Jim McLaughlin 3804 Hwy 75 North PO Box 336 Moorhead, MN Item # Information Requested Bert's Contract Price 6" UNDER TAILGATE SPREADER Hinged bottom pan and top opening lid all 3/16 construction. Standard reverse flight with Drop port offset 24" from left side. Two hydraulic motor operation - one at the auger and one at the spinner for independent variable speed control. Hydraulic safety disconnect before opening bottom door, making clean out safer. Quick Mount Kit - Quickly mount and dismount your spreader by removing pins (no bolts). Brackets are bolted to the spreader body for replacemement and adjustment purposes. Adjustable height spinner assembly, pin on to bottom door, with 18 poly spinner disc. 24" Tailgate shields Anti-flow plate is easily adjustable without the use of tools. U696-DD 6" CARBON STEEL SPREADER, 635 lbs, DIRECT DRIVE $ 2, U696-DD-AS 6" STAINLESS STEEL SPREADER, 635 lbs, DIRECT DRIVE $ 3, U696-GB 6" CARBON STEEL SPREADER, 665 lbs, 5:1 GEAR BOX DRIVE $ 3, U696-GB-AS 6" STAINLESS STEEL SPREADER, 665 lbs, 5:1 GEAR BOX DRIVE $ 4, U696-CD 6" CARBON STEEL SPREADER, 665 lbs, CHAIN DRIVE $ 2, U696-CD-AS 6" STAINLESS STEEL SPREADER, 665 lbs, CHAIN DRIVE $ 4,157.00

25 9" UNDER TAILGATE SPREADER Hinged bottom pan and top opening lid all 3/16 construction. Continuous flighting- Far left and far right drop ports. Two hydraulic motor operation - one at the auger and one at the spinner for independent variable speed control. Hydraulic safety disconnect before opening bottom door, making clean out safer. Quick Mount Kit - Quickly mount and dismount your spreader by removing pins (no bolts). Brackets are bolted to the spreader body for replacemement and adjustment purposes. Adjustable height spinner assembly, pin on to bottom door, with 18 poly spinner disc. 24" Tailgate shields Anti-flow plate is easily adjustable without the use of tools. Berm Chute kit U996-DD 9" CARBON STEEL SPREADER, 730 lbs, DIRECT DRIVE $ 3, U996-DD-AS 9" STAINLESS STEEL SPREADER, 730 lbs, DIRECT DRIVE $ 4, U996-GB 9" CARBON STEEL SPREADER, 760 lbs, 5:1 GEAR BOX DRIVE $ 4, U996-GB-AS 9" STAINLESS STEEL SPREADER, 760 lbs, 5:1 GEAR BOX DRIVE $ 6, SPREADER OPTIONS 36TS-CS 36 Tailgate Shield in lieu of Standard 24 (Carbon Steel) $ TS-SS 36 Tailgate Shield in lieu of Standard 24 (Stainless Steel) $ BON Rigid Pitch Carbon Steel Berm Chute on 6" spreader (Std on 9") $ SM6 Auger-Sensored Motor for 6 under-tailgate spreaders. (not available o $ SM9 Auger-Sensored Motor for 9 under-tailgate spreaders. $ BON Short hose kit (Hoses and Quick disconnects) to reach truck $ U696- -C U696 Spreader - Reverse flite auger and Center Drop Port $ U696- -F U696 Spreader - Continuous flite auger, far left Drop Port $ Standard light bar assembly with (2) L.E.D. Stop, Turn, and Tail lights, UTLB-STT-3LC and (3) light L.E.D. cluster $ Standard light bar assembly with two sets of (2) L.E.D. Stop, Turn, UTLB-STT-STT-and Tail lights, and one (3) light L.E.D. cluster $ Standard light bar assembly with (2) L.E.D. Stop, Turn, and Tail lights, UTLB-STT-BUP (2) incondecent Back up lights, and (3) light L.E.D. cluster $ Standard light bar assembly with (2) L.E.D. Stop, Turn, and Tail lights, UTLB-STT-YF-3(2) L.E.D. Flashing Amber lights, and (3) light L.E.D. cluster $ Installtion of Bonnell Under tailgate Spraders at Berts $ Cost per Loaded Mile for Delivery of Sander $ 2.00 Starting Point: City, State, Zip: Moorhead, MN 56560

FOLLOWING DETAIL. Under tailgate Center line discharge Installation of Sander PRICE See Attached Schedule 8.0-1

FOLLOWING DETAIL. Under tailgate Center line discharge Installation of Sander PRICE See Attached Schedule 8.0-1 PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Falls 1ASD Tailgate 6 & 9" Sanders (Stainless Steel) Under tailgate Center line discharge

More information

1ASD-6CDSS-6P-1D-2S-LM "Salt Special" sander, dual spinner, w/unidirectional reversible auger, includes extra salt shields (Per Ea)

1ASD-6CDSS-6P-1D-2S-LM Salt Special sander, dual spinner, w/unidirectional reversible auger, includes extra salt shields (Per Ea) PRICE SCHEDULE 8.0 TO PROVIDE - Make and Model FALLS 1ASD-6 Stainless Steel Under tailgate type, 6" dia (carbon steel) 6" pitch, single auger, direct hydraulic drive, LH Discharge w/poly self-leveling

More information

STATE OF MINNESOTA PRICING PAGE

STATE OF MINNESOTA PRICING PAGE STATE OF MINNESOTA PRICING PAGE Page 1 of 8 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336

More information

STATE OF MINNESOTA PRICING PAGE

STATE OF MINNESOTA PRICING PAGE STATE OF MINNESOTA PRICING PAGE Page 1 of 1 PLEASE PURCHABert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336

More information

MEYER MATE 9.0 CU FT. SPREADER

MEYER MATE 9.0 CU FT. SPREADER MEYER MATE 9.0 CU FT. SPREADER General Specifications Overall Height: 41.25" Overall Width: 49.5" Overall Depth: 32" Weight Empty: 140 lbs. Spreading Width: Minimum 3 Maximum 30 Spreading Material: Dry

More information

FOLLOWING DETAIL. One Year Warranty, parts and labor

FOLLOWING DETAIL. One Year Warranty, parts and labor - Make and Model Henderson TGS 6 6" diameter auger type tailgate sander with 3/8" thick flighting. Direct drive auger and Spinner motors. Fighting is welded to a 2-3/8" O.D. schedule 80 pipe, supported

More information

TAILGATE SPREADERS The most cost-effective high quality tailgate spreaders in the industry.

TAILGATE SPREADERS The most cost-effective high quality tailgate spreaders in the industry. SaltDogg Mean On Ice, Man's Best Friend. SaltDogg has the cost-effective, quality spreader you need with everything from manual walk-behind spreaders to insert salt spreaders and tailgate spreaders to

More information

V -BOX SPREADERS With over 70 years of experience, Swenson M A K E I T Y O U R W AY.

V -BOX SPREADERS   With over 70 years of experience, Swenson M A K E I T Y O U R W AY. Discover the Swenson Advantage. With over 70 years of experience, Swenson M A K E I T Y O U R W AY. Spreader Company is the recognized leader in the design and manufacturing of truck-mounted spreaders

More information

PRICE LIST. Swenson Spreader Price List. Effective: September 14th, DRIVE PRODUCTS Mississauga, Ontario L4W 1T7

PRICE LIST. Swenson Spreader Price List. Effective: September 14th, DRIVE PRODUCTS Mississauga, Ontario L4W 1T7 2015-16 PRICE LIST Swenson Spreader Price List Effective: September 14th, 2015 DRIVE PRODUCTS Mississauga, Ontario L4W 1T7 Phone: (905) 564-5800 Fax: (905) 564-5799 Toll Free Phone: (800) 668-6012 Website:

More information

Specifications For MEYER UTG GEAR STAINLESS STEEL. General: Comply Exception

Specifications For MEYER UTG GEAR STAINLESS STEEL. General: Comply Exception MEYER UTG GEAR STAINLESS STEEL General: This under tailgate shall be of the bottom opening design. The entire unit shall rigidly mount to the side of the dump box with single pin quick detachable hardware.

More information

Concord Road Equipment Mfg., Inc. NorEast-R. Severe Duty Combination Dump Body Spreader with Flat Floor and Integral Center Conveyor

Concord Road Equipment Mfg., Inc. NorEast-R. Severe Duty Combination Dump Body Spreader with Flat Floor and Integral Center Conveyor Body Lengths Standard available body lengths (inside of headsheet to inside of tailgate) are 9ft, 10ft, 11ft, 13ft, and 15ft; special sizes are available upon request Understructure Construction Longitudinal

More information

STATE OF MINNESOTA PRICING PAGE

STATE OF MINNESOTA PRICING PAGE Page 1 of 3 PLEASE PURCHASE ExceAspen Equipment Co Contact Person: Mark Lundeen Street Address: 9150 Pillsbury Ave. South P.O. Box: City, State, Zip Bloomington, MN 55420 Phone #: 952-888-2525 Toll Free

More information

22956 Hwy 61 PO Box 295 Morley, MO Phone: Fax: MODOT 04/17/17

22956 Hwy 61 PO Box 295 Morley, MO Phone: Fax: MODOT 04/17/17 -GENERAL SERVICES FLEET SECTION TP260000 Viking TP 26, 26' Tow Plow with swivel tongue, (1) 12' moldboard and (1) 14', base angles drilled for carbide edges (no cutting edges included), 10 gauge steel

More information

Specifications for: Hi-Way Model SA-6C 304 Stainless Steel Under Tailgate Spreader Comply to. Make and Model Bid: HOPPER AUGER MECHANISM

Specifications for: Hi-Way Model SA-6C 304 Stainless Steel Under Tailgate Spreader Comply to. Make and Model Bid: HOPPER AUGER MECHANISM Hi-Way Model SA-6C 304 Stainless Steel Under Tailgate Spreader GENERAL 1. The under tailgate spreader required in these specifications shall be hydraulically operated and shall consist of a steel trough,

More information

The TARCO Highlander JR is heavy-duty type material spreader that can be used for a variety of light to medium duty truck applications.

The TARCO Highlander JR is heavy-duty type material spreader that can be used for a variety of light to medium duty truck applications. THE BASICS: The TARCO Highlander JR is heavy-duty type material spreader that can be used for a variety of light to medium duty truck applications. Typical buyers of these types of machines include municipalities,

More information

WALK BEHINDS TAILGATE SPREADERS V BOX SPREADERS MUNICIPAL SPREADERS FULL LINE

WALK BEHINDS TAILGATE SPREADERS V BOX SPREADERS MUNICIPAL SPREADERS FULL LINE WALK BEHINDS TAILGATE SPREADERS V BOX SPREADERS MUNICIPAL SPREADERS FULL LINE 2 TABLE OF CONTENTS WALK BEHIND SPREADERS 3 WB100B & WB200B (polymer) WB400 (polymer) TAILGATE SPREADERS 4-8 TGSUV1B (polymer)

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 80190 March 15, 2016 Lit. No. 43778, Rev. 01 Hopper and Drive Components SPEED CASTER 900 Low Profile Tailgate Spreader

More information

Page 1. Equipment: RSP Moldboard Only Serial # RSP RSP Qty: 2. Equipment: OWP Serial # OWP Qty: 1

Page 1. Equipment: RSP Moldboard Only Serial # RSP RSP Qty: 2. Equipment: OWP Serial # OWP Qty: 1 NON STOCK INVENTORY The following units are currently in stock and discounted for immediate delivery. All units are new, unless otherwise stated and sold AS IS. Standard manufacturer s warranty on pumps,

More information

Cost per loaded mile for delivery of hydraulics $

Cost per loaded mile for delivery of hydraulics $ PRICE SCHEDULE 9.0 Hydraulics Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve

More information

ALL NEW DESIGN 2.5 cu.yd. Spreader. with auger or chain drive. see pg. 16 & 17 for details

ALL NEW DESIGN 2.5 cu.yd. Spreader. with auger or chain drive. see pg. 16 & 17 for details 2016-2017 ALL NEW DESIGN 2.5 cu.yd. Spreader with auger or chain drive see pg. 16 & 17 for details Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman as a distributor of

More information

SALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW

SALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW SALTDOGG SPREADERS NEW NEW DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman

More information

SALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW

SALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW SALTDOGG SPREADERS NEW NEW HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie

More information

MUNICIPAL SNOW & ICE CONTROL EQUIPMENT NOTHING WORKS LIKE A DOGG

MUNICIPAL SNOW & ICE CONTROL EQUIPMENT NOTHING WORKS LIKE A DOGG MUNICIPAL SNOW & ICE CONTROL EQUIPMENT NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman as a distributor of driveline components. Buyers continued

More information

INSTALLATION AND INSTRUCTIONAL MANUAL ELECTRIC V-BOX MATERIAL SPREADERS

INSTALLATION AND INSTRUCTIONAL MANUAL ELECTRIC V-BOX MATERIAL SPREADERS 0050-00-00 07-06-00 Contents SAFETY... MOUNTING INSTRUCTION... -5 ELECTRICAL CONTROL INSTRUCTION... 6-9 V-BOX PARTS DIAGRAMS AND LISTINGS... 0-5 SPINNER PARTS DIAGRAMS AND LISTINGS... 6-0 DRIVE SHAFT,

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 November 1, 2017 Lit. No. 99754, Rev. 04 Hopper and Drive Components POLY CASTER Hopper Spreader

More information

ALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS

ALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS ALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS PROPOSAL FOR DUMP BOX BODIES, V BOX SPREADERS, UNDER BODY SCRAPERS, PLOW WINGS, FABRICATION AND ASSEMBLY OF COUNTY DUMP TRUCKS Board of County Road

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 March 15, 19 Lit. No. 99754, Rev. 06 Hopper and Drive Components POLY CASTER Hopper Spreader

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 213 www.fisherplows.com 8001 1, 8004 1, 800 1 January 1, 201 Lit. No. 54, Rev. 02 Hopper and Drive Components POLY CASTER Hopper Spreader Parts

More information

ILLUSTRATED PARTS LISTING EUROPEAN CE POLYHAWK SPREADERS

ILLUSTRATED PARTS LISTING EUROPEAN CE POLYHAWK SPREADERS reserves the right, under its continuing product improvement program, to change construction or design detail, specifications Page HOPPER ASSEMBLY ILLUSTRATED PARTS LISTING 4 3 0 0 9 8 4 3 3 5 5 6 6 9

More information

Hopper and Drive Components

Hopper and Drive Components Western Products, PO Box 45038, Milwaukee, WI 534-9538 www.westernplows.com January 15, 019 Lit. No. 437, Rev. 0 Hopper and Drive Components Striker Hopper Spreader with Electric Motors #99030-1, 99031-1,

More information

STATE OF MINNESOTA PRICING PAGE. Dump Bodies. Version of Excel used: 2013

STATE OF MINNESOTA PRICING PAGE. Dump Bodies. Version of Excel used: 2013 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin 3804 Hwy 75 North 336 Moorhead, MN

More information

Power Options. Also Available. Unique Features. Conveyor & Drive

Power Options. Also Available. Unique Features. Conveyor & Drive FISHER SPREADERS The FISHER PRO-CASTER hopper spreaders are perfect for ice control on driveways, roads and parking lots. Available in 7', 8', 9' and 10' body lengths in powder coated steel or stainless

More information

PICK IT UP. poly hawk ice hawk lpv pv MDV ICKUP V-BOX SPREADERS

PICK IT UP. poly hawk ice hawk lpv pv MDV ICKUP V-BOX SPREADERS PICK IT UP. poly hawk ice hawk lpv pv MDV ICKUP V-BOX SPREADERS HOW TO CHOOSE THE RIGHT SWENSON PV SPREADER FOR YOUR APPLICATION. With a complete line of rugged equipment to choose from, Swenson s value

More information

Piston type, load sensing, 4.67 cu. in. with 1" shut off valve (pump model FASD34L LS)

Piston type, load sensing, 4.67 cu. in. with 1 shut off valve (pump model FASD34L LS) Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation Reservoir size Fluid

More information

TRAILER OR SKID MOUNT AIR COMPRESSOR

TRAILER OR SKID MOUNT AIR COMPRESSOR August 2017 Price quote for: (Typed Resonses Required) TRAILER OR SKID MOUNT AIR COMPRESSOR 1 of 33 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #:

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 78001-1, 78004-1, 78007-1 August 1, 18 Lit. No. 99754, Rev. 05 Hopper and Drive Components POLY-CASTER Hopper Spreader

More information

Hopper and Drive Components

Hopper and Drive Components Western Products, PO Box 2508, Milwaukee, WI 522-958 www.westernplows.com January 15, 2016 Lit. No. 99755, Rev. 00 Hopper and Drive Components Tornado Hopper Spreader Parts List This Parts List is for

More information

Dump Bodies Version of Excel used: CONTRACTOR BODY Warranty

Dump Bodies Version of Excel used: CONTRACTOR BODY Warranty Dump Bodies Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: ABM Equipment & Supply, LLC. Sam Fahey

More information

Hopper and Drive Components STEEL-CASTER Hopper Spreader

Hopper and Drive Components STEEL-CASTER Hopper Spreader Fisher Engineering 99004, 99008, 99012 99015, 990 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com December 15, 20 Lit. No. 99, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader

More information

Hopper and Drive Components

Hopper and Drive Components Western Products, PO Box 08, Milwaukee, WI 8 www.westernplows.com November 1, 01 Lit. No. 8, Rev. 0 Hopper and Drive Components Striker Hopper Spreader with Gasoline Engine #0, 0, 0, 0, 00, 01, 0, 0, 0,

More information

Hopper and Drive Components

Hopper and Drive Components Western Products, PO Box 45038, Milwaukee, WI 534-9538 www.westernplows.com August 1, 0 Lit. No. 437, Rev. 00 Hopper and Drive Components Striker Hopper Spreader With Electric Motors #99030-1, 99031-1,

More information

Hopper and Drive Components

Hopper and Drive Components Western Products, PO Box 08, Milwaukee, WI 8 www.westernplows.com November 1, 01 Lit. No., Rev. 01 Hopper and Drive Components Striker Hopper Spreader With Gasoline Engine #0 1, 0 1, 0 1, 0 1, 00 1, 01

More information

Hopper and Drive Components STEEL-CASTER Hopper Spreader

Hopper and Drive Components STEEL-CASTER Hopper Spreader Fisher Engineering 99004-1, 99008-1, 99012-1 99015-1, 990-1 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com December 15, 20 Lit. No. 43761, Rev. 02 Hopper and Drive Components STEEL-CASTER

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 0 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 99000, 99001 9900, 99009 April 1, 2017 Lit. No. 9994, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader With

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-139 www.fi sherplows.com 99000-1, 99001-1 99005-1, 99009-1 June 15, 018 Lit. No. 43759, Rev. 01 Hopper and Drive Components STEEL-CASTER Hopper

More information

Hopper and Drive Components STEEL-CASTER Hopper Spreader

Hopper and Drive Components STEEL-CASTER Hopper Spreader Fisher Engineering 00, 00, 00, 00, 0 0, 01, 01, 01, 01 0 Gordon Drive, Rockland, Maine 081 1 www.fisherplows.com December 1, 018 Lit. No., Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader

More information

Hydraulics & Controls

Hydraulics & Controls Hydraulics & Controls Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc

More information

STATE OF MINNESOTA. 5.0 DUMP BODY SCOTT ALUMINUM Make. LANDSCAPER BODY Warranty. 1 YEAR BODY, DEALER PRICE LIST Date & I.D.

STATE OF MINNESOTA. 5.0 DUMP BODY SCOTT ALUMINUM Make. LANDSCAPER BODY Warranty. 1 YEAR BODY, DEALER PRICE LIST Date & I.D. Vendor Name: ABM EQUIPMENT & SUPPLY, LLC. PRICING PAGE Contact Person: RON ZIMMER Street Address: 333 2ND STREET NE P.O. Box: City, State, Zip HOPKINS, MN 55343 Phone #: 952-938-5451 Toll Free #: 800-229-5451

More information

Price per loaded mile for delivery $ 2.25 Delivery Time Frame in calendar days ARO

Price per loaded mile for delivery $ 2.25 Delivery Time Frame in calendar days ARO Flatbeds Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin

More information

Installation Instructions

Installation Instructions 909 Tyler Blvd. Mentor, Ohio 00 Phone (0) 9- Fax (0) 9-0 Toll-Free Fax 00--00 saltdogg.com Installation Instructions SHPE000CH Series SaltDogg Electric Chain Drive Poly Hopper Spreader.0 cubic yards U.S.

More information

Date & Price List I.D. Number. Price per loaded mile $

Date & Price List I.D. Number. Price per loaded mile $ 04/2013 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Bert's Truck Equipment of Moorhead, Inc Contact Person: Jim McLaughlin, Government Fleet Sales Street Address: 3804 Highway 75 North P.O. Box: PO

More information

Hydraulics & Controls

Hydraulics & Controls Hydraulics & Controls Contract end Date 10-31-17 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc

More information

MODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016

MODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016 Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 06/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway Equipment

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 0 Gordon Drive, Rockland, Maine 0484 39 www.fisherplows.com 99000, 9900 9900, 99009 January, 07 Lit. No. 9994, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader With Electric

More information

Date & Price List I.D. Number June 23rd, 2014

Date & Price List I.D. Number June 23rd, 2014 07/2014 VERSION 4 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Jim McLaughlin 3804 Hwy

More information

Liftmoore Electric & Hydraulic Cranes. One Year from in service date. Date & I.D. of Price List

Liftmoore Electric & Hydraulic Cranes. One Year from in service date. Date & I.D. of Price List #250-109 STATE OF MINNESOTA PRICING PAGE ADDENDUM 3 5-11-2011 Vendor Name:, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336

More information

Date & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0%

Date & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0% #250-109 STATE OF MINNESOTA PRICING PAGE Page 1 of 1 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead,

More information

STATE OF MINNESOTA PRICING PAGE

STATE OF MINNESOTA PRICING PAGE Vendor Name: Stonebrooke Equipment, Inc. Contact Person: Loren Holman or Customer Service Street Address: 14311 Ewing Avenue P.O. Box: City, State, Zip Burnsville, MN 55306 Phone #: (952) 224-4440 Toll

More information

MODEL SUPER P Parts List

MODEL SUPER P Parts List MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway

More information

STATE OF MINNESOTA PRICING PAGE Dump Bodies

STATE OF MINNESOTA PRICING PAGE Dump Bodies STATE OF MINNESOTA PRICING PAGE Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City, State, Zip St Paul, MN 55109 Phone #: 651-393-2274 Toll

More information

V-Maxx G2 Hopper Spreader

V-Maxx G2 Hopper Spreader July, 0 Lit. No. 04, Rev. 04 V-Maxx G Hopper Spreader VX-300 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 4 4 3 0 4 0 3 3 30 Lit. No. 04, Rev. 04 July, 0 3 ROTATING AUGER CAN CAUSE SERIOUS

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80190 January 15, 2019 Lit. No. 43778, Rev. 03 Hopper and Drive Components SPEED-CASTER 900 Low-Profile Tailgate Spreader

More information

Addendum #4 PRICE SCHEDULE 1.0 VENDOR PROVIDED INFORMATION

Addendum #4 PRICE SCHEDULE 1.0 VENDOR PROVIDED INFORMATION Addendum #4 PRICE SCHEDULE 1.0 BOX OPTIONS VENDOR PROVIDED INFORMATION Misc 2.27 1312120 Gatesaver Hyd Tailgate Insert Installed $2,760.00 2.31 1650355 Frame End cap W/OEM Stop-Tail-Turn Light mounts (Required

More information

SNOW PLOW, FRAME, HYDRAULIC SYSTEM, DUMP BODY, WING, SPREADER AND PRE-WET TANK SYSTEM

SNOW PLOW, FRAME, HYDRAULIC SYSTEM, DUMP BODY, WING, SPREADER AND PRE-WET TANK SYSTEM DEKALB COUNTY HIGHWAY DEPARTMENT SNOW PLOW, FRAME, HYDRAULIC SYSTEM, DUMP BODY, WING, SPREADER AND PRE-WET TANK SYSTEM Sealed proposal for the furnishing and installing of snow plow, frame, hydraulic system,

More information

V-Maxx G2 Hopper Spreader

V-Maxx G2 Hopper Spreader July, 0 Lit. No. 0, Rev. 0 V-Maxx G Hopper Spreader VX-00 & VX-00HO Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC Hopper Assembly 0 Lit. No. 0, Rev. 0 July, 0 Keep arms, hands, and loose clothing away

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725-417 Price quote for: (Typed Responses Required) MUNICIPAL UTILITY TRACTOR 1 of 10 Vendor Name: Contact Person: Scott Reierson Street Address: 333 2nd Street NE P.O. Box: City, State, Zip Hopkins,

More information

Installation Manual. Self-Contained Hopper Spreaders Carbon & Stainless Steel Models. Table of Contents. General Information CAUTION

Installation Manual. Self-Contained Hopper Spreaders Carbon & Stainless Steel Models. Table of Contents. General Information CAUTION 9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 974-8888 Fax (440) 974-0165 Toll-Free Fax 800-841-8003 buyersproducts.com Self-Contained Hopper Spreaders Carbon & Stainless Steel Models Manual applies

More information

78002, 78005, Hopper Spreader Components

78002, 78005, Hopper Spreader Components Blizzard, PO Box 245038, Milwaukee, WI 53224 9538 www.blizzardplows.com June 15, 2016 Lit. No. 94207, Rev. 03 78002, 78005, 78008 Hopper Spreader Components ICE CHASER Hopper Spreader Parts List This Parts

More information

ILLUSTRATED PARTS LISTING EUROPEAN CE PV SPREADERS

ILLUSTRATED PARTS LISTING EUROPEAN CE PV SPREADERS reserves the right, under its continuing product improvement program, to change construction or design detail, specifications 85 Euclid Ave Cleveland, Ohio Phone 6-86- Fax 6-86-95 Page HOPPER ASSEMBLY

More information

STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Crawler Dozer. Spec # Information Requested Answer. Cold weather starting aid(s)

STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Crawler Dozer. Spec # Information Requested Answer. Cold weather starting aid(s) Crawler Dozer Price quote for: Vendor Name: RDO Equipment Company Contact Person: Jesse Miller Street Address: 12500 Dupont Avenue South P.O. Box: City, State, Zip Burnsville, Minnesota 55337 Phone #:

More information

AUTHORIZED DISTRIBUTOR LIST - IF APPLICABLE

AUTHORIZED DISTRIBUTOR LIST - IF APPLICABLE AUTHORIZED DISTRIBUTOR LIST - IF APPLICABLE RESPONDER'S NAME: Dan Gage SWIFT EVENT NUMBER: G0210-2000001031 Round 1 Version 1 Following is a list of all distributors that are authorized to sell the equipment

More information

V-Maxx G2 Hopper Spreader

V-Maxx G2 Hopper Spreader September, 0 Lit. No. 04, Rev. 03 V-Maxx G Hopper Spreader VX-300 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 4 4 3 0 4 0 3 3 30 Lit. No. 04, Rev. 03 September, 0 3 ROTATING AUGER CAN

More information

STATE OF MINNESOTA PRICING Page % DISCOUNT

STATE OF MINNESOTA PRICING Page % DISCOUNT STATE OF MINNESOTA PRICING Page % DISCOUNT TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Ziegler Inc. Contact Person: Mark Phillippi, Tim Hoeft

More information

LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME:

LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME: LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME: DATE WARRANTY CARD RETURNED: VIA: WEBSITE MAIL FORCE UNLIMITED LLC FORCE UNLIMITED LLC

More information

Instruction Manual. Municipal-Sized Hydraulic Powered Stainless Steel Hopper Spreaders. Table of Contents

Instruction Manual. Municipal-Sized Hydraulic Powered Stainless Steel Hopper Spreaders. Table of Contents 9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 974-8888 Fax (440) 974-065 Toll-Free Fax 800-84-8003 saltdogg.com Municipal-Sized Hydraulic Powered Stainless Steel Hopper Spreaders Table of Contents Instruction

More information

City of New Haven. 101 FRONT STREET PO BOX 236 NEW HAVEN, MO Phone * * Fax

City of New Haven. 101 FRONT STREET PO BOX 236 NEW HAVEN, MO Phone *  * Fax City of New Haven 101 FRONT STREET PO BOX 236 NEW HAVEN, MO 63068 Phone 573-237-2349 * www.newhavenmo.org * Fax 573-237-4696 August 20, 2014 Request for Bids, Medium Duty Truck City of New Haven The City

More information

Instruction Manual. SHPE1500 Salt Dogg Spreader Hopper Poly Electrical 1.5 cubic yards

Instruction Manual. SHPE1500 Salt Dogg Spreader Hopper Poly Electrical 1.5 cubic yards 9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 974-8888 Fax (440) 974-0165 Toll-Free Fax 800-841-8003 buyersproducts.com SHPE1500 Salt Dogg Spreader Hopper Poly Electrical 1.5 cubic yards Instruction

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

Owners Manual SS, SS Self-Contained Stainless Steel Hopper Spreaders. Table of Contents. General Information

Owners Manual SS, SS Self-Contained Stainless Steel Hopper Spreaders. Table of Contents. General Information Owners Manual 1400601SS, 1400701SS Self-Contained Stainless Steel Hopper Spreaders Table of Contents Warranty Information... 1 General Information... 1-2 Safety Precautions... 2 Installation Instructions...

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152, 80190 January 15, 2019 Lit. No. 70499, Rev. 01 Hopper and Drive Components SPEED-CASTER 525, SPEED-CASTER 900

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush Chipper File: C796-12082014 Vendor Name: Contact Person: Street Address: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat, Inc Nick Kentros

More information

78002, 78005, Hopper Spreader Components

78002, 78005, Hopper Spreader Components Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com February 1, 20 Lit. No. 94192, Rev. 78002, 78005, 78008 Hopper Spreader Components ICE CHASER Hopper Spreader Parts List This Parts

More information

V-Maxx G2 Hopper Spreader

V-Maxx G2 Hopper Spreader October, 07 Lit. No. 707, Rev. 00 V-Maxx G Hopper Spreader VX-00 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 5 8 9 7 7 8 0 5 0 8 9 5 8 9 Lit. No. 707, Rev. 00 October, 07 ROTATING AUGER

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush Chipper File: C796- Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat, Inc Nick Kentros

More information

Pro 575X, Pro 1075X Single Stage Tailgate Spreader

Pro 575X, Pro 1075X Single Stage Tailgate Spreader August 1, 2017 Lit. No. 70443, Rev. 04 Pro 575X, Pro 1075X Single Stage Tailgate Spreader SP-575X-1, SP-1075X-1 Parts List This Parts List is for SnowEx Pro spreaders with serial numbers beginning with

More information

V-Maxx G2 Hopper Spreader

V-Maxx G2 Hopper Spreader October, 07 Lit. No. 70, Rev. 0 V-Maxx G Hopper Spreader VX-0 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 7 0 7 7 7 0 Lit. No. 70, Rev. 0 October, 07 ROTATING AUGER CAN CAUSE SERIOUS

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152-1, 80190-1 October 1, 2018 Lit. No. 70497, Rev. 01 Hopper and Drive Components SPEED-CASTER 525, SPEED-CASTER 900

More information

Installation Manual. Self-Contained Hopper Spreaders Carbon & Stainless Steel Models

Installation Manual. Self-Contained Hopper Spreaders Carbon & Stainless Steel Models Self-Contained Hopper Spreaders Carbon & Stainless Steel Models This manual applies to the following models: 72" Spreaders (serial numbers 1200 and above) 96" Spreaders (serial numbers 4884 and above)

More information

It don t mean a thing If it ain t got the swing

It don t mean a thing If it ain t got the swing SWING CHUTE SAND/SALT SPREADER INSTALLATION AND OPERATING INSTRUCTIONS SWING CHUTE SPREADER MODELS: 7, 8, 9, 9.5 & 10 MANUAL FOR SPREADER SERIAL NUMBERS AFTER # 20000 It don t mean a thing If it ain t

More information

S STATE OF MINNESOTA PRICE PAGES S-843(5)

S STATE OF MINNESOTA PRICE PAGES S-843(5) Vendor Name: MacQueen Equipment, Inc. Contact Person: Dan Gage Street Address: 595 Aldine Street P.O. Box: City, State, Zip St. Paul, MN 55104 Phone #: 651.645.5726 Toll Free #: 800.832.6417 Fax #: 651.645.6668

More information

Tender Town of Yarmouth Equipment Purchase 5 Ton Single Axle Truck Complete with dump box, slide-in spreader, pre-wet system, and spreader controls.

Tender Town of Yarmouth Equipment Purchase 5 Ton Single Axle Truck Complete with dump box, slide-in spreader, pre-wet system, and spreader controls. Tender Town of Yarmouth Equipment Purchase 5 Ton Single Axle Truck Complete with dump box, slide-in spreader, pre-wet system, and spreader controls. General Instructions: 1. All bids must be submitted

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

Airflo MANUFACTURING CO., INC.

Airflo MANUFACTURING CO., INC. Airflo MANUFACTURING CO., INC. 365 UPPER OAKWOOD AVE, ELMIRA NY 14903 PHONE: 607-733-8284 / FAX: 607-733-0587 OPERATOR & PARTS MANUAL PSV-8L ELECTRIC SPREADER Visit our website at www.air-flo.com Contents

More information

LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME:

LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME: LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME: DATE WARRANTY CARD RETURNED: VIA: WEBSITE MAIL FORCE UNLIMITED LLC FORCE UNLIMITED LLC

More information

STATE OF MINNESOTA PRICING Page % DISCOUNT

STATE OF MINNESOTA PRICING Page % DISCOUNT TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City,

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) 1 of 7 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: ABM Equipment & Supply, LLC. Contact Person: Scott Reierson Street Address: 333 2nd Street NE P.O. Box: City, State, Zip Hopkins, MN 55343

More information

Installation Instructions

Installation Instructions 909 Tyler Blvd. Mentor, Ohio 060 Phone (0) 97- Fax (0) 97-016 Toll-Free Fax 00-1-00 saltdogg.com Installation Instructions SHPE000 SaltDogg Electric Drive Poly Hopper Spreader.0 cubic yards U.S. PATENT

More information

ILLUSTRATED PARTS LISTING EUROPEAN CE LPV SPREADERS

ILLUSTRATED PARTS LISTING EUROPEAN CE LPV SPREADERS reserves the right, under its continuing product improvement program, to change construction or design detail, speci - HOPPER ASSEMBLY reserves the right, under its continuing product improvement program,

More information

OUR TRUCKS OFF-ROAD FUEL/LUBE TRUCKS MECHANICS TRUCKS... 3 LIGHT DUTY SERVICE BODY TRUCKS... 5 VACUUM TRUCKS LIGHT DUTY DUMP TRUCKS...

OUR TRUCKS OFF-ROAD FUEL/LUBE TRUCKS MECHANICS TRUCKS... 3 LIGHT DUTY SERVICE BODY TRUCKS... 5 VACUUM TRUCKS LIGHT DUTY DUMP TRUCKS... OUR TRUCKS During the past 85 years, we have grown into one of America s largest manufacturers and dealers of commercial service vehicles. We deliver internationally, with sales and service provided throughout

More information

Installation Instructions

Installation Instructions 0 Tyler Blvd. Mentor, Ohio 00 Phone (0) - Fax (0) -0 Toll-Free Fax 00--00 saltdogg.com Installation Instructions PRO000 &PRO000CH Series SaltDogg Electric Drive Poly Hopper Spreader.0 cubic yards U.S.

More information