PROVEN INNOVATION / PROVEN UNDERGROUND. D500x500

Transcription

1 PROVEN INNOVATION / PROVEN UNDERGROUND D500x500

2 From the smallest drills, all the way up to the D1000x900, our customers know Vermeer and Vermeer dealers can be trusted to deliver exceptional support on the jobsite. Derek Choi Balama Prima Shanghai, China

3 MAXI RIG/HORIZONTAL DIRECTIONAL DRILL 500x500

4 SPECIFICATIONS Field-tested Vermeer maxi rigs are just what the large-diameter drilling market has been waiting for: tough, productive drills with the reliability that is expected from Vermeer. Specifications General/Dimensions (transport) Curb weight (GVW): 101,000 lb (45,812.8 kg) Length: 50.3' (15.3 m) Width: 8.5' (2.6 m) Height: 11.5' (3.5 m) Suspension: Triple axle with air ride suspension Drill rack angle: Operational Max thrust: 475,100 lb (215,502 kg) Max pullback: 475,100 lb (215,502 kg) Max spindle torque: 52,900 ft-lb (71,723 Nm) Max spindle speed (with PS800): 73 rpm Max carriage speed: 71 fpm (21.6 m/min) Number of rotation motors: 1 Number of drive motors: 2 Mud swivel: 3" (7.6 cm) Remote lockout system: Yes Strike alert system: Yes Lower Breakout Vise Breakout torque: 206,400 ft-lb (279,841 Nm) Clamp force: 251,300 lb (113,988 kg) Configuration: 3-jaw clamp, 8" (20.3 cm) Travel: 6' (1.8 m) Inside diameter: 9.8" (24.9 cm) Weight: 3800 lb ( kg) UPPER Breakout Vise Clamp force: 251,300 lb (113,988 kg) Configuration: 2-jaw clamp Inside diameter: 9.8" (24.9 cm)

5 POWER SOURCE The larger the project, the more you have riding on your power unit. That s why our maxi rigs feature the reliable power of CAT engines. Power Source PS800 General/Dimensions Engine(s) make/model: (1) CAT C27 ACERT Gross horsepower (max): 800 hp (596.6 kw) Max engine speed: 2000 rpm EPA Certification Family: Tier 2 (EU Stage II) Fuel type: Diesel Fuel capacity: 500 gal ( L) Hydraulic tank capacity: 720 gal ( L) Length: 24.4' (7.4 m) Width: 8.1' (2.5 m) Height: 10.3' (3.1 m) Weight: 38,000 lb (17,236.5 kg)

6 HYDRAULIC SYSTEM Hydraulic System Power Unit Layout Rotation and Thrust Circuit A Manifold B Manifold Ho t oi l shuttle out to drill rack Ho t oi l shuttle out to drill rack A Manifold B Manifold PUMPS (2) Rotary pumps (3) Travel pumps (1) Vise pump (1) Dual tandem flush pump (1) Dual tandem kidney loop pump Thrust/Pullback Circuit Hydraulic pumps (3) Sauer-Danfoss Series 90 Travel motors (2) Hagglunds CA Planetary gears (2) Dinamic GB16001 Rotation Circuit Hydraulic pumps (2) Sauer-Danfoss Series 90 Hydraulic motor (1) Hagglunds CA210 Auxiliary Circuits Vise pumps (PFC pumps) (2) Sauer-Danfoss Series 45 Flush pumps (2) Sauer-Danfoss gear pump Kidney loop pumps (2) Sauer-Danfoss gear pump

7 HYDRAULIC SYSTEM Hydraulic System Heat Exchanger/Cooler Diagram Hydraulic Reservoir 720 gal ( L) capacity In-tank filtration Hot-oil sump to separate hot and cool oil Three suction strainers with shutoffs Filtration Components (5) 10-micron charge filters (10) 10-micron high pressure filters (1) 25-micron flush filter (1) 25-micron vise psi filter (1) 25-micron vise return filter Hydraulic Quick Disconnects Flat-faced seal, connect under pressure near-zero leak Heat exchanger/cooler Cold-oil bypass Variable speed fan

8 HYDRAULIC SYSTEM Carriage Assembly The adjustable upper vise is mounted to the carriage assembly and grips the drill rod directly in front of the quill, helping prevent rod wrap or windup when breaking out of the upper joint. Rotation Motor Crossover relief valve Shrink disc Thrust Box Output shaft Input shaft from rotation motor Thrust Box Cutaway Spherical roller bearing Thrust bearing Thrust washers Travel Motors and Planetary Gears Water course Thrust shaft Bearing retainer Rotary brake Travel motor Planetary gear Shrink disc Pinion gear

9 DRILL RACK Drill Rack Rack gear assembly Double I-beam construction Weld-on gear 1-year limited warranty Trailer Double-axle Air suspension 11R 24.5 tires/5-ply tread Additional components Rear base anchor Front base anchor Rear stabilizers Rear hydraulic drill lift (Large front anchor shown) Front Anchor Large Length: 19.9' (6.1 m) Width: 6' (1.8 m) Height: 3.2' (1 m) Weight: 7850 lb ( kg) Front Anchor SMALL Length: 10.5' (3.2 m) Width: 5.5' (1.7 m) Height: 1.9' (.6 m) Weight: 3000 lb ( kg) (Rear anchor) REAR Anchor Length: 16' (4.9 m) Width: 7.8' (2.4 m) Height: 1.3' (.4 m) Weight: 4300 lb ( kg)

10 DRILL RACK Breakout System upper Vise/Breakout System Dual-cylinder design Integrated into carriage to reduce breakout time Integrated hydraulically controlled rod alignment arm LOWER Vise/Breakout System Three cylinder design 10" (25.4 cm) inside diameter opening 6' (1.8 m) of travel Variably sized vise blocks - 4.5" (11.4 cm) - 5.5" (14 cm) - 6.6" (16.8 cm) Replaceable die inserts Lower vise assembly is detached via two pins and six hydraulic quick disconnects for ease of removal during casing installations Replaceable die inserts

11 DRILLER S CABIN Driller s Cabin Operator Control Cab (skid mounted) Length: 11.6' (3.5 m) Height: 8' (2.4 m) Width: 7.9' (2.4 m) Weight: 6000 lb ( kg) Heat and air conditioning: 3 ton (2.7 tonnes) in-wall combination unit Electrical panel: 110V and 220V 50 Hz or 60 Hz available Minimum required generator: 17 kw (21 kva) Driller s Cabin Designed to accommodate operator and steering hand Large tinted windows for exceptional visibility Steel tube frame Finished interior with aluminum-faced sheeting Available with domestic or international remote lockout Operator console Controls designed for operator comfort Comfort Sound insulated Climate-controlled via in-wall combo heat/airconditioning unit

12 DRILLER S CABIN Operator Console Manual vise controls Variable-speed rotation switch Rotation Travel Vise Drilling fluid pressure Upper vise rod adjustment Rod support controls Rotation control Engine rpm control switches Variable-travel speed switches Remote lockout Rotation torque limiter valve Vise pressure valve Engine stop Electric vise switches Hydraulic stop Thrust/pullback control Thrust limiter valve Pullback limiter valve Engine, diagnostics, remote lockout and strike alert display Equipment shown is for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries Vermeer Corporation. All Rights Reserved.