AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS
|
|
|
- Shanna O’Connor’
- 6 years ago
- Views:
Transcription
1 AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS The metal chassis mount Z series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. This range complies with IEC and AES standards. CSA File Number Features The D size housing can be either front or rear mounted using the same panel cutout. The P size housing is the original wide flange front mounting XLR connector. PN is the original narrow flange front mounting male connector. A leading first mate last break socket contact is standard on all female connectors (Pin 1). Solder cup or versions. Connectors are fitted with a grounding system for RFI shielding applications. Available in 3, 4, 5, 6A and 7 contact arrangements. Compatible with all other XLR brands. Options Solder Bucket termination contacts Zinc Diecast Shell - Satin Zinc Diecast Shell - Black Polyester Finish Gold, Silver or Tin Plated Contacts aging Single Bag packs Precision machined contacts Cost effective stamped contacts on 3 pole Latchless versions (Non-Latching) (Female only) Note: A ground tag is standard on all AC Z series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases. The non-conductive Black polyester finish insulates the ground tag from the shell and should not be used in applications requiring ground contact to the shell. Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. 23
2 METAL D TYPE FLANGE - SOLDER AND PCB Features: Zinc Diecast Shell. D size housing can be front or rear mounted using the same panel cutout. Solder Bucket connections. mounting (not available in 4 contact female). Precision machined or Stamped contacts (3 pin only). Leading first mate last break socket contact. Positive latch lock system. Options: Stamped contacts (3 contact only), Gold plated contacts, contacts, Black finish, Non-Latching (Female only),. Part Number Breakdown: Page 30 Specifications: Page 31 PCB Footprints: Page 32 Panel Cutouts: Page 32 AC3MMDZ AC3MMDZ-AU AC3MMDZV AC3MMDZ BULK AC3MMDZB AC3MMDZB-AU AC3MMDZVB AC3MMDZB BULK Stamped contacts, AC3MDZ AC3MDZ-AU AC3MDZ BULK Stamped contacts, AC3MDZB AC3MDZB-AU AC3MDZB BULK XLR 3 pole female, Stamped contacts, AC3FDZ AC3FDZ-AU AC3FDZ BULK XLR 3 pole female, Stamped contacts, AC3FDZB AC3FDZB-AU AC3FDZB BULK 24
3 METAL D TYPE FLANGE XLR 4 pole male, XLR 4 pole male, XLR 4 pole female, XLR 4 pole female, XLR 5 pole male, XLR 5 pole male, XLR 5 pole female, XLR 5 pole female, AC4MDZ AC4MDZ-AU AC4MDZV AC4MDZ BULK AC4MDZB AC4MDZB-AU AC4MDZVB AC4MDZB BULK AC4FDZ AC4FDZ-AU AC4FDZV AC4FDZ BULK AC4FDZB AC4FDZB-AU AC4FDZVB AC4FDZB BULK AC5MDZ AC5MDZ-AU AC5MDZV AC5MDZ BULK AC5MDZB AC5MDZB-AU AC5MDZVB AC5MDZB BULK AC5FDZ AC5FDZ-AU AC5FDZV AC5FDZ BULK AC5FDZB AC5FDZB-AU AC5FDZVB AC5FDZB BULK 25
4 METAL D TYPE FLANGE XLR 6A pole male, XLR 6A pole male, XLR 6A pole female, XLR 6A pole female, XLR 7 pole male, XLR 7 pole male, XLR 7 pole female, XLR 7 pole female, AC6AMDZ AC6AMDZ-AU AC6AMDZV AC6AMDZ BULK AC6AMDZB AC6AMDZB-AU AC6AMDZVB AC6AMDZB BULK AC6AFDZ AC6AFDZ-AU AC6AFDZV AC6AFDZ BULK AC6AFDZB AC6AFDZB-AU AC6AFDZVB AC6AFDZB BULK AC7MDZ AC7MDZV AC7MDZ BULK AC7MDZB AC7MDZVB AC7MDZB BULK AC7FDZ AC7FDZV AC7FDZ BULK AC7FDZB AC7FDZVB AC7FDZB BULK 26
5 METAL P TYPE FLANGE - SOLDER AND PCB Features: Zinc Diecast shell. The P size housing is the original wide flange front mounting XLR connector. PN is the original narrow, front mounting male connector. Solder Bucket connections. Precision Machined or Stamped contacts (3 pin only). Leading first mate last break socket contact. Positive latch lock system. Options: Stamped contacts (3 contact only), Gold plated contacts,, Non-Latching (Female only),. Part Number Breakdown: Page 30 Specifications: Page 31 PCB Footprints: Page 32 Panel Cutouts: Page 32 AC3MMPNZ AC3MMPNZB Stamped contacts, AC3MPNZ AC3MPNZB AC3MMP AC3MMPB Stamped contacts Black FInish AC3MP AC3MPB XLR 3 pole female, Stamped contacts AC3FPZ AC3FPZB XLR 4 pole male, AC4MPNZ AC4MPNZB 27
6 METAL P TYPE FLANGE XLR 4 pole male, Black FInish AC4MP AC4MPB XLR 4 pole female, AC4FPZ AC4FPZB XLR 5 pole male, AC5MPNZ AC5MPNZB XLR 5 pole male, AC5MP AC5MPB XLR 5 pole female, Black FInish AC5FPZ AC5FPZB XLR 6A pole male, AC6AMPNZ AC6AMPNZB XLR 6A pole male, AC6AMP AC6AMPB XLR 6A pole female, AC6AFPZ AC6AFPZB 28
7 METAL P TYPE FLANGE XLR 7 pole male, Black FInish AC7MPNZ AC7MPNZB XLR 7 pole male, AC7MP AC7MPB XLR 7 pole female, AC7FPZ AC7FPZB 29
8 METAL TYPE FLANGE PART NUMBER BREAKDOWN METAL TYPE FLANGE E. G. AC3MMPNZVB-AU BULK AC (Series Prefix), 3 contacts, Male, Machined Contacts, PN (Narrow Flange), Z (Metal Chassis Series), Black Polyester Finish, - AU (), aged. SERIES PREFIX CONTACT LAYOUTS GENDER CONTACT TYPE SHELL STYLE SHELL SERIES SHELL FINISH CONTACT PLATING AC 3 M M PN Z B - AU BULK PACKAGING SERIES PREFIX AC = Series Prefix 3 = 3 Contacts CONTACT LAYOUTS GENDER MACHINED CONTACTS 1 4 = 4 Contacts 5 = 5 Contacts 6A = 6 Contacts 7 = 7 Contacts F = Female Socket Contacts M = Male Pin Contacts Blank = Stamped Contacts M = Machined Contacts (Applicable 3 male pin contacts only) D = Small Flange (front or rear mounting) SHELL STYLE SHELL SERIES P = Large Shell with Wide Flange PN = Large Shell with Narrow Flange (male only) Blank = Male P Shell Style Only Z = Metal Chassis Series 2 Blank = Nickel Plated Finish SHELL FINISH B = Black Polyester Finish CONTACT PLATING 3 (Silver or Tin - refer to Data) Blank = Plating AU = PACKAGING Blank = Individual Bags BULK = ed Note: contact connectors have machined contacts and grounding as standard. They are not available in stamped contacts. 2 Ground contacts are not supplied with the black polyester finish shell option. 3 7 Contact is gold plated as standard. 4 Non-Latching Versions (Female) available - Please contact us for part number options. 30
9 STANDARD DATA STANDARD DATA AC SERIES CHASSIS - METAL Z VALUE GENERAL CHARACTERISTICS Number of contacts Contact Arrangement (Front view of pin inserts) A 7 Termination Solder Bucket / Printed Circuit Board (PCB) Max. Wire Gauge - Stranded wire: Solder 14AWG 16AWG 18AWG 18AWG 20AWG Printed Circuit Board - PCB N/A N/A N/A N/A N/A ELECTRICAL CHARACTERISTICS Flammability rating of plastics Environmental Service Voltage RMS Test Voltage AC RMS UL94V-0 Complies with EU RoHS 2 Directive 2011/65/EU 133V 1400V 1) Current carrying capacity: Solder 15A 10A 7.5A 7.5A 5A Printed Circuit Board (PCB) 15A 10A 7.5A 7.5A 5A CLIMATIC CHARACTERISTICS Typical Contact Resistance Insulation Resistance Protection Class Operating Temperature 3mΩ 1000MΩ IP40-25 C to +75 C (-13 F to +167 F) MECHANICAL CHARACTERISTICS 2) Weight - Metal 31g 32g 33g 33g 33g (0.068lb) (0.070lb) (0.072lb) (0.072lb) (0.072lb) MATERIALS Mechanical Operations Connector Shell Shell Finish Insulators Male Contact Stamped Solder and PCB-(Material/Plating) Machined Solder-(Material/Plating) Female Contact 1000 mating cycles Diecast Zinc Alloy Satin Nickel or Black Polyester UL94V-0 PBT Resin or Modified PPE Resin Phosphor Bronze / Silver or Gold (optional) Brass / Silver or Gold (optional) Rev 3-03/2013 1) Stamped Solder and PCB-(Material/Plating) Machined Solder-(Material/Plating) Not suitable for domestic applications above 50V Phosphor Bronze / Tin or Gold (optional) Brass / Silver or Gold (Optional) 2) Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes. 31
10 METAL TYPE FLANGE AC SERIES CHASSIS METAL Z PCB FOOTPRINTS STRAIGHT (V) CONNECTOR SIDE OF PCB AC3MM*ZV AC4F*ZV AC4M*ZV AC5F*ZV AC5M*ZV AC6AF*ZV AC6AM*ZV AC7F*ZV AC7M*ZV PANEL CUTOUT DIMENSIONS FRONT VIEW AC*FDZ AC*MDZ 32 AC*FPZ AC*MP AC*MPNZ
11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: AC3MB-AU AC3MCP-AU AC3MP-AU AC3MPNZ-AU AC3FDZ-AU AC3MDZ-AU AC5FDZB-AU AC5MDZB-AU AC3MMP BULK
AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS
AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS The metal chassis mount Z series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications
Amphenol Australia Pty. Ltd.
Amphenol Australia Pty. Ltd. Amphenol Australia s head office is based in Melbourne, Victoria and is the Sales, Marketing and Engineering centre of excellence for an extensive range of professional connector
AC SERIES XLR PCB CHASSIS MOUNT CONNECTORS
A AND B TYPE FLANGE AC SERIES XLR PCB CHASSIS MOUNT CONNECTORS The AC series, A and B type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers (OEM) needs
SP SERIES LOUDSPEAKER CONNECTORS
SP SERIES LOUDSPEAKER CONNECTORS Amphenol s range of loudspeaker connectors have been further enhanced with the introduction of the SP Series. Designed to complement the popular EP/AP Series, we now offer
EP series cable clamp capable of supporting cables from 9mm (0.35 ) to 16mm (0.63 ) in diameter. Quick release, vibration resistant latch lock.
EP / AP / SP SERIES HIGH POWER / LOUDSPEAKER CONNECTORS SP/EP/AP SERIES HIGH POWER / LOUDSPEAKER CONNECTORS The SP Series are available in 2 or 4 pole chassis mount connectors. The durable thermoplastic
Jaws Cable Clamp Options for T-Series* Standard Jaws cable clamp (Black), Cable O.D 3mm to 6mm (0.118 to ) Musician Range Cable Clamp Options
1/4 PHONE CONNECTORS Amphenol offers two ranges of 1/4 Phone plug connectors to satisfy the needs of the manufacturer and the end user. The PRO a heavy duty on-road plug and the MUSICIAN - a solid performing
Jaws Cable Clamp Options for T-Series* Standard Jaws cable clamp (Black), Cable O.D 3mm to 6mm (0.118 to )
1/4 PHONE CONNECTORS Amphenol offers two ranges of 1/4 Phone plug connectors to satisfy the needs of the manufacturer and the end user. The PRO a heavy duty on-road plug and the MUSICIAN - a solid performing
Waterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
Jaws Cable Clamp Options for T-Series* Standard Jaws cable clamp (Black), Cable O.D 3mm to 6mm (0.118 to ) Chuck Clamp for Q-Series
1/4 PHONE CONNECTORS Amphenol offers two ranges of 1/4 Phone plug connectors to satisfy the needs of the manufacturer and the end user. The PRO a heavy duty on-road plug and the MUSICIAN - a solid performing
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
SCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
Amphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
Loudspeaker Connectors. onlinecomponents.com
Loudspeaker Connectors onents.com 57 Content Page speakon SPX Series 4 Pole Cable Connector... 60 Ordering Information... 61 Accessories... 61 speakon FC Series, 2, 4 and 8 Pole Cable Connector... 62 Ordering
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
Operating voltage from 10 KVDC to 15 kvdc. Operating current up to 13 A. 2-5 HV contacts. For cable sizes AWG 26-14
Operating voltage from 10 KVDC to 15 kvdc Operating current up to 1 A 2-5 HV contacts For cable sizes AWG 26-14 Overview Series MC P/N Description Plug Receptacle Cable mount Panel mount Coupling HV-pins
EPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
CONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
Ditto Wire-to-Wire Genderless Interconnects. Single-Housing and Terminal Interconnect System
Ditto Wire-to-Wire Interconnects Single-Housing and Terminal Interconnect System Ditto Wire-to-Wire Interconnects 36876 Terminal 36877 Housing Molex develops genderless, low-amperage wire-to-wire interconnects
06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
CSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
Adam Technologies, Inc.
iec 320 & mini iec CoNNeCTorS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable
ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............
D-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
Amphenol Amphenol PCD Shenzhen Excel Mate High Voltage Safety Lock
Amphenol Amphenol PCD Shenzhen Excel Mate High Voltage Safety Lock www.amphenolpcd.com.cn CONTENT Excel Mate Product introduction........ 2 Excel Mate plus.... 3 1 PIN RECPTACLE........ 4 1 PIN PLUG.........
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
SEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CCF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 25.4 x 14.9
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CIF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 18.4 x 15.5
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
REP Series. Environmentally-Sealed Rectangular Plastic Connectors
Environmentally-Sealed Rectangular Plastic Connectors REP Series Environmentally - Sealed Rectangular Plastic Connectors Optimised for use in rail and embedded applications Smiths Interconnectors REP Series,
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
HV HV Series Connector and cable assembly
Amphenol Amphenol PCD Shenzhen HV HV Series Connector and cable assembly www.amphenolpcd.com.cn CONTENT HV Series connector and cable assembly PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE.........
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
RoHS 2011/65/EU GREEN ELECTRONICS MSG. Terminal Blocks ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2011/65/EU e3 GREEN ELECTRONICS Terminal Blocks ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS TERMINAL BLOCKS Functional characteristics s 270
Amphenol Amphenol PCD Shenzhen. Xcel Power Mate TM.
Amphenol Amphenol PCD Shenzhen Xcel Power Mate TM www.amphenolpcd.com.cn PRODUCT PROFILE Xcel Power Mate TM Auto-latch mating mechanism provides fast and reliable connection with audible and tactile feedback
97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
HYDROCON Standard Sealed Connectors
HYDROCON Standard Sealed Connectors Ratings: 2 & 3 Pole 10A 250V AC/DC 4 Pole 6A 250V AC/DC 6 & 7 Pole 3A 250V AC/DC 9 Pole 5A 150V AC/DC 25 Pole 1A 50V AC/DC Contact Resistance:
Directory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
Interconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
DISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES
B10 CHAPTER FISCHER CORE SERIES DISPO COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES Sterilizable (EtO), gamma) Color-coded for easy integration Single or two-piece shell Lightweight and shock resistant
MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
Luminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
RoHS 2002/95/EC GREEN ELECTRONICS PSQ. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA
HARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
MIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
Castellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Copyright 2013 JAE Electronics, Inc.
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Application Examples Laptops, Desktops, Ultrabooks Audio/ Video editing equipment Display devices Adapter/
Amphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
Part Number Example (example) CDR31 BP 101 B K S M. MIL Style Voltage-temperature Limits
Part Number Example CDR31 thru CDR35 MILITARY DESIGNATION PER MIL-PRF-55681 W D L t Part Number Example (example) CDR31 BP 101 B K S M MIL Style Voltage-temperature Limits T Capacitance Rated Voltage Termination
CONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
MIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
Featuring Radsok Technology. eco mate rm. Rugged Metal Shielded Connectors RELIABLE SIGNAL AND POWER SOLUTIONS
Featuring Radsok Technology eco mate rm Rugged Metal Shielded Connectors RELIABLE SIGNAL AND POWER SOLUTIONS www.amphenol-sine.com +1 800 394 7732 2 2015 Amphenol Sine Systems Corporation. Every effort
Customer P/N: UDE P/N: GD4-QU Description:
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Down Through Hole 10G Base-T Contact Area : 30μ" Min.Gold LED: without LED 100% RoHS without exemption Spec No. GD416005-00 Update Date 2016/11/28 Revision
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
Adam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
Cannon Trident Connector System
is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for
- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
Excel Mate Mono High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen Excel Mate Mono High Voltage with Inter-Lock AMPHENOL PCD SHENZHEN www.amphenolpcd.com.cn CONTENT ExcelMate Mono (HVBI) PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE......
CIF CONNECTORS. Functional Characteristics. Brief Description. RoHS 2002/95/EC. Dimensional Class: Medium. Standard Colour: Green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS Functional Characteristics Dimensional Class: Medium Standard Colour: Green Dimensions: 18.4 x 15.5 mm (.724 x.610 in) Max Approved Wire
RoHS 2002/95/EC GREEN ELECTRONICS CVF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
dummyplug RCA / CINCH J (MJ, RJ, SJ) Jack Cable Assemblies Loudspeaker Modules Fiber Connector Plugs Patch Panel Circular Connector Transformer
P a r t N u m b e r G u i d e N e u t r i k P a r t N u m b e r G u i d e NC3FAH1-B-0-D Packaging: D Cable connector: Bulk packed Assembly: D Chassis connector: Disassembled Push latch Retention: w/o Latch
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
EPIC CIRCON M23 Series
CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland provides strain relief,
Amphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
CONEC SnapLock. 1 Introduction
CONEC SnapLock 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional screwing. A spring-loaded clip integrated
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
Rail Product Selection Guide. Proven rail expertise. Global capabilities.
Rail Product Selection Guide Proven rail expertise. Global capabilities. We Connect When it matters most. UNDER CAR TRAIN CONTROL ITT Veam and Cannon connectors support today s advanced train control systems,
MTB TERMINAL BLOCKS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Height: 8.5 mm (.335 in) 0 10 ½ 20 Max approved wire sections: solid: 1.5 mm2 (IMQ); 16 AWG (UL) stranded: 1 mm²
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
Standard Buccaneer IP68 BUCCANEER FOR POWER BUCCANEER POWER
IP68 Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding Contact Insert Sealing Cap Clip