NOVEMBER 2009 UPDATE CATALOGUE

Transcription

1 NOVEMBER 009 UPDATE international APPLICATION CATALOGUE NUMBER

2 OME FEATURES SPORT SHOCK ABSORBERS LARGE BORE 5MM TWIN TUBE DESIGN - Allows greater oil volume for cooling and sustained valving performance and strong.6mm outer tube construction protects the vital internal components from damage. LARGE 8MM HARDENED CHROME PISTON ROD - Strong enough to handle any load or harsh conditions expected from your x. TRIPLE LIP CHECK VALVE OIL SEAL MK -The latest technology in oil seal design physically larger with quantum improvements in durability, oil and gas retention with much greater resistance to heat so it keeps working under the harshest conditions. TEFLON IMPREGNATED LOW FRICTION ROD GUIDE - The latest refinement in rod guide design further reduces heat build up and maintains performance. TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A new component that maintains consistent and uniform performance by providing a tight and uniform fit between the piston rod and rod guide. MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique and new valving system that features multiple disc valving control at the base of the shock and on both sides of the piston rod. This allows the ome engineers more valving options for better ride quality and handling control. 5MM HIGH FLOW TEFLON BANDED PISTON - New low friction design has less restrictive oil flow through the piston, reduces heat build up and aeration of the oil that leads to fade. VEHICLE SPECIFIC VALVING - OME shock absorber s performance stand head and shoulders over its competitors because many hours of ome engineering valving work has been put into each and every shock absorber to ensure our customers get the best ride and handling their vehicle can have. POLYETHYLENE DIRT SHIELD Impact resistant, polyethylene dirt shield provides additional protection from stone chips and off road debris. NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance. SUPPLEMENTARY WELDS - For strength and reliability all mounts have supplementary welds. WARRANTY - year/60,000km warranty. SHOCK ABSORBERS Giant 8mm Chromed Shaft - Indestructible for Australia s rugged off roading. Induction hardened then hard chromed to a superfine finish. Nitrogen Gas - The gas pressure keeps the oil cohesive under all situations. Twin Tube Design - % thicker outer tube insures that rocks do not damage internal operating components. This design also allows for a greater volume of oil which keeps shock cooler. 5mm Seven Stage Compression Valve - Delivers all the subtleties of compression rates for the best ride and handling. Check Valve Seal - The latest in seal technology, this shaft seal significantly improves gas retention whilst offering excellent longevity. Glacier Bush - A Teflon coated rod guide bush - significantly reduces heat build up in the rod guide area, developed from the Emu s off road racing programme. Giant 5mm Teflon Banded Piston - A new four stage coil sprung rebound valve system to control vehicle bounce. Supplementary Welds - On all mounting eyes & pins for maximum shock absorber mount strength. Stoneguard - Protects oil seal and piston rod against stone and dirt damage. Warranty - year/0,000km warranty. COIL SPRINGS X5K MICRO-ALLOYED SPRING STEEL New generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties. SHOT PEENED To reduce stress, which greatly enhances spring life. DOUBLE SCRAGGED To eliminate spring sag. VARIABLE & CONSTANT RATE Designs used to obtain optimum ride comfort and load carrying capabilities STEERING STABILISERS Coil Sprung 9 Stage Valving - For optimum performance. 5mm Piston & Bore - Greater oil volume giving better damper performance. Twin Tube Design - Protects the internal components against stone damage. Steel Stoneguard - Protects the piston rod against stone damage. foam cell - Keeps the oil at the valving to prevent fade. Original Mounts - All mounts are of similar design to original stabilisers for ease of fitment. LEAF SPRINGS Flat Axle Seat Area - Lowers spring stress whilst retaining spring free camber height. Unique to most OME springs. Anti Friction Inter Leaf Liners - Used where applicable to reduce friction between spring leaves giving better ride comfort and increased spring life. Shot Peened - On the tension side of all leaves to double spring life. Draw Tapered & Diamond Cut Leaves - For reduced interleaf friction and improved load distribution in the load bearing area. Graphite Coated - For further reduced friction. Military Wrapped - For extra safety (where fitment permits). Loose Clamped - For smooth & quiet operation. URETHANE BUSHES - LEAF SPRING PREMIUM GRADE - Not all bushes are the same - OME bushes are precision moulded in captive moulds to ensure exact tolerances for long bush life. SPLINES - Ensures the best fit by taking up irregularities in spring eyes. UNIQUE OME DESIGN - Clever lip seal and shoulder design prevents dirt penetrating between bush shoulder and shackle face. GREASABLE SHACKLES Reduced Wear - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling. Anti Inversion Facility - Built in feature on all LandCruiser greasable shackles. Servicing - Simple & effective.

3 CONTENTS PAGE GUIDE TO SELECTION.. SPORT SELECTION.... S & STEERING STABILISER APPLICATIONS COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE 0 LTR REMOTE CANISTER SELECTION COMPETITION SHOCK & SPRING SELECTION SUSPENSION APPLICATIONS CHRYSLER... FORD.... HOLDEN / ISUZU / GM HYUNDAI.... KIA... LADA NIVA.. LAND ROVER.... MAZDA... MITSUBISHI... NISSAN.. SSANGYONG.... SUZUKI... TOYOTA TECHNICAL SPECIFICATIONS ADDING OR REMOVING AN EXTRA LEAF... REPLACEMENT MAIN OR ND LEAF REPLACEMENT CENTRE BOLTS. DAKAR SPRING SERVICE PARTS. U BOLTS... SUSPENSION FITTING KITS LEAF SPRING TRIM PACKERS CLIP LINER KITS FOR LEAF SPRINGS INTER-LEAF LINER KIT FOR LEAF SPRINGS LEAF SPRING CENTRE BOLT SLEEVES.. DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS SUSPENSION BUSH KIT SELECTION..... SPORT SPECIFICATIONS.. SPECIFICATIONS... SHOCK ABSORBER MOUNT TYPE TORSION BAR SPECIFICATIONS LEAF SPRING SPECIFICATIONS..... COIL SPRING SPECIFICATIONS OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS NUMERICAL SPRING & SHOCK BUSH APPLICATIONS STEERING STABILISER SPECIFICATIONS.... TORSION BAR FITTING HINTS.... STRUT CARTRIDGE FITMENT INSTRUCTIONS.. RECOMMENDED FITTING TIMES.. ARB Corporation Limited, Old Man Emu Division P.O. Box 05 Kilsyth, Vic. 7 Australia. All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical, including photocopying, recording, taping or information systems) without the written permission of the publisher Page OME NO. INT Nov09

4 GUIDE TO SELECTION Terminologies & Explanations Please note most suspension development has been carried out on Australian specification models. Therefore, some differences may exist between the same model in another country. Overseas customers will need to make allowances for these possible differences. Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles which will not require all items, eg. Trimming kits, caster kits, all U bolts shown, etc. Actual, individual vehicle requirements can only be determined when the suspension system is fitted. GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and tyre specifications. Exceeding GVM ratings can have legal and safety implications and is not recommended. LOAD RATING - : Weights shown are maximum permissible loads with regard to accessories fitted, eg. Bull bar, winch, dual battery, etc. LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride and handling. : LIGHT LOAD: Full passenger load with luggage weights up to 50kg. MEDIUM LOAD: Full passenger load with luggage weight varying from 00kg to 50kg. CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring performance. Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications. LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original ride height. This amount can vary from vehicle to vehicle. OE: Original Equipment, as supplied by the manufacturer of the vehicle. SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*) indicates the shock absorber with the firmer ride. SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the flange area and regularly thereafter with OME polyurethane grease. STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutral valving. CASTER KIT: The OMECA77B, CALR and CALR kits consist of eccentric bushes which are pressed into the leading arms of the vehicle. This will induce positive caster into the front geometry. LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A" have a greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B' springs to the passenger side. COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication. GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eye bushes. TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning. VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height. VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height. VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle trimming problems and will increase ride height when fitted. Page OME NO. INT Nov09

5 SPORT SELECTION SELECTION ADVICE Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring rates and customer applications. Firm Valving The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle bounce over rough roads. If a softer valved Selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads. Soft Valving Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can occur. A RECOMMENDATION FOR CUSTOMERS BUYING REPLACEMENT SHOCK ABSORBERS By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the original springs are also ready for replacement. It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to work a lot harder. Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling qualities will also be reduced. REMEMBER: A good set of shock absorbers will not overcome a bad set of springs. OME SPORT STEERING SHOCKS & STRUTS STABILISERS YEAR VEHICLE DESCRIPTION CHRYSLER JEEP 98 on Cherokee XJ - Petrol & Diesel OMESD on Wrangler JK - All Models to 006 Wrangler TJ *6007 / 6006 *6009 / OMESD0 9 DAIHATSU 99 to 997 Feroza II F Under Development 988 to 99 Feroza I F Under Development 99 on Rocky F78 Wide Track 600 Under Development OMESD '86 on FORD 006 on Ranger PJ All Models to 005 Courier/Ranger Pick Up to 99 Raider Wagon All Maverick Wagon & Hard Top *600 / 600 *6005 / 600 To 8/89 OMESD 9/89 on OMESD6 HOLDEN/ISUZU/CHEVY 00 on Rodeo/Isuzu Pick up - RA Models / Colorado Diesel on Rodeo/Isuzu Pick up - RA Models / Colorado V /8 to 00 Rodeo/Isuzu Pick Up KB, KBD & TFS 600 /86 to /9 Jackaroo/Trooper to 0/86 Jackaroo/Trooper to 6/00 Frontera Wagon to 998 Frontera UT 600 *6006 / 600 *6006 / 600 *6006 / 600 *6006 / *6006 / 600 Under Development Under Development LAND ROVER 999 to 00 Discovery Series II (Not Suitable for Airbag Models) 600 *6005 / 6006 OMESD0 99 to 999 Discovery Series I 6007 *6009 / 6008 OMESD To 5/995 Range Rover (Not Suitable for Airbag Models) 6007 *6009 / 6008 OMESD 98 on Defender & County 90, 0 & *6009 / 6008 OMESD Page OME NO. INT Nov09

6 SPORT SELECTION YEAR MAZDA VEHICLE DESCRIPTION 006 on Mazda BT50 All Models to 005 B600 Pick Up All Models 600 OME SPORT SHOCKS & STRUTS STEERING STABILISERS MITSUBISHI /000 on Pajero/Montero NS, NM & NP (. Diesel) *90007 / /000 on Pajero/Montero NS, NM & NP Wagon & Hard Top (V6) *90007 / to /000 Pajero/Montero (Coil Springs) NH, NJ, NK & NL to /000 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL to 5/9 Pajero/Montero (Coil Springs) NF & NG 6005 To /99 Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG to 008 Challenger/Montero Sports (Coil Springs) to 000 Challenger/Montero Sports (Leaf Springs) on Triton/L00 ML All Models /96 to 006 Triton/L00 MK Models to 9/96 Triton/L00 MJ Models to 8/96 Triton/L00 V6 (OE Springs) /86 to 99 Triton/L00 (V6 & Cylinder) ME, MF, MG, MH 6005 To 986 L00 MA, MB, MC & MD 6005 To 9/986 L00 Vans SA, SB, SC & SD 6005 *600 / 6009 *600 / *6006 / *6006 / Under Development *6006 / NISSAN /000 on Patrol Y6 (GU) Series II SWB & Wagon *600 / 600 *6005 / 600 OMESD0 997 to /00 Patrol Y6 (GU) Series I Wagon & SWB *600 / 600 *6005 / 600 OMESD 997 on Patrol Y6 (GU) Cab Chassis (Leaf Spring Rear) *600 / 600 Under Development 997 on Patrol Y6 (GU) Cab Chassis (All Coil Springs) *600 / 600 *6005 / 600 OMESD To 8/989 Patrol Y60 (GQ) Wagon & SWB *600 / 600 *6005 / 600 OMESD 9/989 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis *600 / 600 *6005 / 600 OMESD6 005 on Pathfinder R to 8/95 Pathfinder/Terrano WD 600 *6006 / 600 OMESD5 005 on Navara D /86 to 8/0 Navara D & D Pick Up OMESD5 6 0/00 on Navara D /986 on Navara D & D Pick Up x 6000 Under Development 980 to Ute & Cab Chassis 6000 *6006 / to 999 Terrano II x (European Models) SUZUKI 009 on Equator (US Market Only) SSANGYONG To 005 Musso, Sport Utility & Korando Models 600 Under Development TOYOTA 007 on LandCruiser 00 Series V *6000 / 6009 /998 on LandCruiser 00 Series (IFS) *6000 / *6000 / 6000 /998 on LandCruiser 00 & 05 Series (Front Live Axle) OMESD /90 to 998 LandCruiser 80 Series OMESD /00 on Prado 0 Series (Except TEMS/Grande Models) *60005 / /96 to 0/0 Prado 95 & KZJ90 Series 9000 *6007 / on LandCruiser 78 & 79 Series V8 Diesel Model *600 / 6000 OMESD7 007 on LandCruiser 76 Series Wagon - V *600 / 6000 OMESD7 999 to 006 LandCruiser 78 & 79 Series - 6 cylinder models *600 / 6000 OMESD 985 to 999 LandCruiser 75 Series *6006 / *600 / 6000 OMESD 985 on LandCruiser 70, 7 & 7 Series OMESD All LandCruiser HZJ7 & HJZ7 Series OMESD 986 to /90 LandCruiser 60,6 & 6 Series (Rear Lower Pin 9mm) *6006 / *60065 / 6006 OMESD 980 to 986 LandCruiser 60 Series (Rear Lower Pin 6mm) *6006 / *6006 / 600 OMESD 006 on FJ Cruiser Page OME NO. INT Nov09

7 SPORT SELECTION YEAR VEHICLE DESCRIPTION OME SPORT SHOCKS & STRUTS STEERING STABILISERS TOYOTA (continued) 005 on HiLux Vigo KUN6R, GGN5R 9000 *60007 / /97 to 00 HiLux Tiger LN7, LN67, KZN 65, RZN7 & RZN69 (IFS) LHS RHS OMESD 9/8 to 8/97 HiLux LN65, YN65, LN06 & RN05 (All Leaf Suspension) 6006 *60065 / 6006 OMESD 988 to 8/97 HiLux/ Runner LN07, RN05, RN0 & LN (IFS) Under Development *60065 / 6006 To 8/98 HiLux LN6 & RN6 (All Leaf) (Rear Lower Pin 6mm) 6006 *6006 / 600 OMESD 00 on Runner (USA) *60005 / 6000 NOTES: *first part number has firmer valving.. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME66 (suit LandCruiser 80 & 00 Series only) OME660 (all other models).. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.. FK8 rear sway bar extension bracket for LWB models and FK for SWB models are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop.. FK support brackets must be installed to upper shock mounting brackets on late 996 on models manufactured in Thailand. 5. OME Struts can only be installed with OME Coil Springs. 6. OMESD5 will suit D models only is 0mm longer and must only be installed to right hand side. 8. OMEB bush kit is required to convert lower 9mm bush to 6mm ID. 9. OMESD0 will only fit left hand drive models. 0. FK6 0mm bump stop spacer kit mandatory fitment. Note: Replacement Nitrocharger Sport Dirt Shields: , 80060, & The last numbers of the part number indicates the length of the dirt shield. The replacement Dirt Shield Part Number for Individual Sport Shocks are listed in the Nitrocharger Sport Specifications on page 95. Page 5 OME NO. INT Nov09

8 S & STEERING STABILISERS SHOCK ABSORBER SELECTION ADVICE Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring rates and customer applications. Firm Valving The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle bounce over rough roads. If a softer valved Selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads. Soft Valving Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can occur. A CAUTION FOR CUSTOMERS BUYING REPLACEMENT SHOCK ABSORBERS By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the original springs are also ready for replacement. It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to work a lot harder. Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling qualities will also be reduced. REMEMBER: A good set of shock absorbers will not overcome a bad set of springs. OME S, STRUTS & CARTRIDGES STEERING STABILISERS YEAR VEHICLE DESCRIPTION CHRYSLER JEEP 00 on Cherokee KJ ALL Models (OME Springs) *NS/NS0 N 006 on Grand Cherokee WH & WK N88S N to 005 Grand Cherokee WJ & WG - Petrol Models N N7 99 to 998 Grand Cherokee ZJ - 6 cylinder *N9/N9C *N0/N0C OMESD0 98 on Cherokee XJ - Petrol & Diesel *N5/N5C *N6/N6C OMESD0 To 986 Cherokee Wagon & J0 Ute (Full Size) N N56 97 to 986 Cherokee W0 & J0 Utes and Cab Chassis N N To 986 CJ5, 6, 7, & 8 *N/N8 *N56/N5 006 on Wrangler JK - All Models *N96/N *N98/N 997 to 006 Wrangler TJ *N66/N66C N67 6 OMESD0 986 to 996 Wrangler YJ N N OMESD0 DAIHATSU 99 to 997 Feroza II F0 *N8/N57G *N9/N to 99 Feroza I F00 *N8/N57G N 99 on Rocky F78 Wide Track N6F N OMESD '86 on 98 to 8/9 Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs OME07 N OMESD '86 on 98 to 99 Rocky F77 & 78 Tray Top with Leaf Springs OME07 *N8/N97 All Scat Hard Top N/N8 *N8/N97 FORD 006 on Ranger PJ All Models N87 9 N to 005 Courier/Ranger Pick Up N5 9 *N5/N5C To 00 Explorer x Only N6 N7 005 on Ford F50 & F50 N95 N to 00 Ford F50 & F50 N78 N79+N to 99 Raider Wagon N5 *N5/N5C All Maverick Wagon & Hard Top *N/NF *N9/NF To 8/89 OMESD 9/89 on OMESD6 All Maverick Ute & Cab Chassis N8 N5 OMESD 98 to 989 Bronco (Single I Beam Front End) N5F N 98 to 989 Bronco (Dual I Beam Front End) *N5F & N N 98 to 989 F00 x & x (Single I Beam) N5F N 970 to 980 F00 x & x (Twin I Beam) N5F N to 979 F50 x & x (Twin I Beam) N5F N55 Page 6 OME NO. INT Nov09

9 S & STEERING STABILISERS STEERING STABILISERS YEAR VEHICLE DESCRIPTION HOLDEN/ISUZU/CHEVY 00 on Rodeo/Isuzu Pick up -RA & RA7 Models/Colorado Diesel N65 *N/N89 00 on Rodeo/Isuzu Pick up - RA Models/Colorado V6 N50 *N/N89 7/8 to 00 Rodeo/Isuzu Pick Up KB, KBD & TFS *N65/N6F *N/N89 /9 to 00 Jackaroo/Trooper & Monterey (Isuzu Wagon) N65 *N5/N5C /86 to /9 Jackaroo/Trooper *N65/N6F N to 0/86 Jackaroo/Trooper *N65/N6F *N/N89 99 to 6/00 Frontera Wagon *N65/N6F N0 995 to 998 Frontera UT N6F N5C 985 to 987 Drover QB (OE Springs) OME05 OME0 OMESD0 985 to 987 Drover QB (OME Springs Fitted) OME05 OME0 OMESD0 HYUNDAI 00 on Terracan V6 N70 00 on Terracan Diesel N6 KIA 006 on Sorento All Models N7S + N8S 0 to Late 06 Sorento All Models N7S + N8S LAND ROVER OME S, STRUTS & CARTRIDGES *N7/N7 *N7/N7 999 to 00 Discovery Series II (Not Suitable for Air Bag Models) *N07/N07C *N08/N08C OMESD0 99 to 999 Discovery Series I *N5/N5F *N/N6 OMESD 99 to 00 Range Rover MK II P8A Models N76 8 N77 8 To 5/995 Range Rover (Not Suitable for Air Bag Models) *N5/N5F *N/N6 OMESD 98 on Defender & County 90, 0 & 0 *N5/N5F *N/N6 OMESD To 98 Land Rover Series I, II & III (80" & 09") N78 N69 OMESD To 98 Land Rover Series II & III (88" SWB) N78 N90 OMESD N05 N9 MAHINDRA 990 to 99 Bushranger & Stockman CJ0 *N/N8 MAZDA 006 on Mazda BT50 All Models N to 005 B600 Pick Up All Models N5 9 *N/N8 N89 N5 MITSUBISHI /000 on Pajero/Montero NS, NM & NP (. Diesel) *N0S/N9S /000 on Pajero/Montero NS, NM & NP Wagon & Hard Top (V6) *N0S/N9S/ N09S 99 to /00 Pajero/Montero (Coil Springs) NH, NJ, NK & NL N8 99 to /00 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL N8 989 to 5/9 Pajero/Montero (Coil Springs) NF & NG N60G To /99 Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG N60G 000 to 008 Challenger/Montero Sports (Coil Springs) N57G 998 to 000 Challenger/Montero Sports (Leaf Springs) N57G 006 on Triton/L00 ML All Models N86S 9/96 to 005 Triton/L00 MK All Models *N8/N57G 99 to 8/96 Triton/L00 V6 (OE Springs) N60G 99 to 8/96 Triton/L00 (V6) MH & MJ N60G 986 to 8/96 Triton/L00 ( Cylinder) ME, MF, MG, MH & MJ N60G To 986 L00 MA, MB, MC & MD N60G To 9/986 L00 Vans SA, SB, SC & SD N60G NISSAN *N0/N5/N0 *N0/N5/N0 N6 *N56/N5 N6G *N56/N5 N6 *N56/N5 *N59/N5 N0E N0E N0 /000 on Patrol Y6 (GU) Series II SWB & Wagon *N9/N9C *N9/N9C 7 OMESD0 997 to /00 Patrol Y6 (GU) Series I Wagon & SWB *N9/N9C *N9/N9C 7 OMESD 997 on Patrol Y6 (GU) Cab Chassis (Leaf Spring Rear) *N9/N9C N5 997 on Patrol Y6 (GU) Cab Chassis (All Coil Springs) *N9/N9C *N9/N9C 7 OMESD To 8/989 Patrol Y60 (GQ) Wagon & SWB *N/NF *N9/NF OMESD 9/989 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis *N/NF *N9/NF OMESD6 988 to 7/97 Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) N8 N5 OMESD 8/8 to 988 Patrol MQ Wagon, SWB, Ute & Cab Chassis N9 *N8/N97 OMESD 980 to 7/8 Patrol MQ Wagon, SWB, Ute & Cab Chassis *N7/N96 *N8/N97 OMESD 967 to 979 Patrol 60 & G60 Series N9 N9 OMESD N0 N0 N89 Page 7 OME NO. INT Nov09

10 S & STEERING STABILISERS OME S, STRUTS & CARTRIDGES STEERING STABILISERS YEAR VEHICLE DESCRIPTION NISSAN (continued) 005 on Pathfinder R5 N8S N8 /99 to 005 Pathfinder R50 NS+NS N0 996 to /99 Pathfinder R50 NS+NS N6 986 to 8/95 Pathfinder/Terrano WD N6F *N/N89 OMESD5 005 on Navara D0 N8S N85 /86 to 8/0 Navara D & D Pick Up N58 5 *N59/N56 OMESD5 6 0/00 on Navara D N5 5 *N59/N56 /986 on Navara D & D Pick Up x *N8/N57G 5 *N/N8 996 to 005 Terrano II x (European Models) (OE Springs) N6F N0 980 to Ute & Cab Chassis *N8/N57G 5 *N/N89 SUZUKI 009 on Equator (US Market Only) N8S 00 on XL7 Wagon V6 N7S 995 to 005 Grand Vitara & 6 Cylinder N0S 7/88 to 005 Vitara TA0 & TD0 & Wagon N0S 7/88 to 005 Vitara TA0 TD0 SWB N0S All Jimny SN (OE Springs) OME08 OME00 9 All Jimny SN (OME Springs) OME08 OME09 To 00 Santana Samurai All Models OME0 OME05 OMESD to 995 Sierra SJ0 & SJ Ute MG0 / WT000cc (OME Springs) OME05 OME0 OMESD to 996 Sierra SJ70, SJ7, SJ, MG0 / WT00cc (OME Springs) OME05 OME0 OMESD to /8 LJ80 & LJ80V SWB (OME Springs) OME05 N OMESD to /8 LJ80 & LJ80V SWB (OE Springs) OME05 N/A OMESD to /8 LJ80 Ute (OME Springs) OME05 OME0 OMESD0 97 to /8 50, LJ0, LJ0 & LJ50 (OME Springs) OME05 OME0 SSANGYONG To 005 Musso, Sport Utility & Korando Models N65 TOYOTA 007 on LandCruiser 00 Series V8 N08S 0 /998 on LandCruiser 00 Series (IFS) *N99/N/N00 *N00/N0/N0C /998 on LandCruiser 00 & 05 Series (Front Live Axle) *N7/N70 *N7E/N7E OMESD /90 to 998 LandCruiser 80 Series *N7/N70 *N7E/N7E OMESD /00 on Prado 0 Series (Except TEMS/Grande Models) *N0S/N0S/ N9S *N0/N/N 7/96 to 0/0 Prado 95 & KZJ90 Series *N9S/N9SC *N86/N86C 007 on LandCruiser 78 & 79 Series V8 Diesel Model *N8/N06 *N97/N75E OMESD7 007 on LandCruiser 76 Series Wagon - V8 *N8/N06 *N97/N75E OMESD7 999 to 006 LandCruiser 78 & 79 Series - 6 cylinder models N06 *N75F/N75E OMESD 985 to 999 LandCruiser 75 Series *N50/N88 *N75F/N75E OMESD All LandCruiser II LJ/RJ70, LJ/KZJ7 & LJ/KZJ78 Models N77 N79 OMESD 98 to 990 LandCruiser Bundera, SWB, LJ70 & RJ70 Series N N&N 985 on LandCruiser 70,7 & 7 Series *N50/N88/N9 *N85/N9 OMESD All LandCruiser HZJ7 & HJZ7 Series N06 N68 OMESD 986 to /90 LandCruiser 60,6 & 6 Series (Rear Lower Pin 9mm) *N50/N88/N9 *N90/N85/N9 OMESD 980 to 986 LandCruiser 60 Series (Rear Lower Pin 6mm) *N50/N88/N9 *N/N89/N95 OMESD 980 to 986 LandCruiser 60 Series (OE Springs) N50 N OMESD 986 to /90 LandCruiser 60 Series (OE Springs) N50 N90 OMESD To /980 LandCruiser FJ55 N N To /98 LandCruiser 5 & 7 Series *N/N8 *N/N89 OMESD To /98 LandCruiser BJ, FJ & HJ 0 & Series All Models *N/N8 *N89/N95 OMESD To /98 LandCruiser BJ, FJ & HJ 0 & Series All Models (OE Springs) N N OMESD 005 on Fortuner *N67S/N66S N9 006 on FJ Cruiser N0S N 005 on HiLux Vigo KUN6R, GGN5R *N67S/N66S *N69/N68 9/97 to 00 HiLux Tiger LN7, LN67, KZN 65, RZN7 & *N87/N80 *N75&N75E/ OMESD RZN69 (IFS) N68&N68E 8 9/8 to 8/97 HiLux LN65, YN65, LN06 & RN05 (All Leaf Suspension) *N9/N8 *N85/N9 OMESD 9/8 to 8/97 HiLux LN65, YN65, LN06 & RN05 (OE Springs) N8 *N90/N85 OMESD N85 N5 N05 N05 N N8 *N0/N09 Page 8 OME NO. INT Nov09

11 S & STEERING STABILISERS OME S, STRUTS & CARTRIDGES YEAR VEHICLE DESCRIPTION TOYOTA (continued) STEERING STABILISERS 988 to 8/97 HiLux/ Runner LN07, RN05, RN0 & LN (IFS) N98 *N85/N9 988 to 8/97 HiLux/ Runner LN07, RN05, RN0 & LN(IFS)(OE Springs) N98 *N90/N85 OMESD To 8/98 HiLux LN6 & RN6 (All Leaf) (Rear Lower Pin 6mm) *N9/N8 *N89/N95 OMESD To 8/98 HiLux LN6 & RN6 (All Leaf) (Rear Lower Pin 6mm)(OE Springs) N8 *N/N89 OMESD 00 on Runner (USA) N0S N 996 to 00 Runner Front & Rear Coil Springs (USA) N9S/N9SC N86/N86C 990 to 996 Runner (IFS) Front Torsion Bar/Rear Coil Springs N98 N7F OMESD 986 to 990 Runner (IFS) Rear Leaf Springs (OE Springs) N98 N85/N9 OMESD 986 to 990 Runner (IFS) Rear Leaf Springs N98 N85/N9 OMESD 98 to 986 Runner (Front Live Axle) (OE Springs) N8 N90/N85 OMESD 98 to 986 Runner (Front Live Axle) N9/N8 N85/N9 OMESD 98 to 98 Blizzard *N/N8 N8 997 to 00 Kijang (th Gen.) N8 N56 0/00 on Tacoma V6 N0S N8 To 00 Tacoma V6 *N9S/N9SC N on Tundra N9S N9 VOLKSWAGON 985 to 990 Syncro x N8S N7 NOTES: *first part number has firmer valving.. 98 and on wide track CJ Jeeps require bush kit OMEB7 for the front lower mount and all Cherokee wagons and Mahindra lower front and rear mounts.. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME66 (suit LandCruiser 80 & 00 Series only) OME660 (all other models).. 98 on F00 and Bronco require bush kit OMEB7 on bottom rear mount.. Ford dual shocks. N fitted in front of N5F. 5. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber. 6. FK6 0mm bump stop spacer kit mandatory fitment. 7. FK8 rear sway bar extension bracket for LWB models and FK for SWB models are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop. 8. N75E and N68E are 0mm longer and must only be installed to right hand side. 9. FK support brackets must be installed to upper shock mounting brackets on late 996 on models manufactured in Thailand. 0. N08S can only be installed with OME Coil Springs.. N79 suits models with single rear shock set up. Models with twin rear shocks require N79 fitment rear of axle, N80 front of axle, also fitment of OME660 stone shields are recommended on the N80.. OMESD0 will only fit left hand drive models.. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB) be fitted.. Models with ABS will require an SMP68 ABS bracket kit. 5. OMEB bush kit is required to convert lower 9mm bush to 6mm ID. 6. OMESD5 will suit D models only. 7. Only suitable for models equipped with original steering damper. 8. Shocks are the same length as OE. 9. OME00 is shorter than OME09 and must be used with OE coils to ensure coils remain entrapped. Note: Replacement dust boot part numbers: Nitrocharger OME Page 9 OME NO. INT Nov09

12 COMPACT AWD - OME SPRING & SHOCK ABSORBER LIFT F/R YEAR VEHICLE DESCRIPTION (mm) PRICE PRICE DAIHATSU 97 to 006 Terios J00 J0 0/0 OME5 OME5 FORD To 06/006 Escape BA ZA AB 0/0 OME90 Front-Cartridge, Rear - Nitrocharger NC5 00 to 0/07 Territory SX SY AWD (WD) 0/0 OME5 GM / OPEL 006 on Captiva, Antara - V6 (.) & Diesel 0/0 OME59 HONDA 0/007 on CRV 0/0 OME55 /0 to 0/07 CRV MY 00 MY 005 -/0 CANNOT LIFT 0/97 to /0 CRV RD 0/0 OME797 OME Struts to Suit OME Springs N6S HYUNDAI 05/06 to 8/08 Santa Fe CM V6 (.7) & Diesel 0/0 OME to 005 Santa Fe 0/0 OME907 OME Front - Cartridge, Rear - OME Gas NC60 KIA 005 on Sportage V6 & Diesel 0/0 OME to 00 Sportage JA MY0 MY0 - V6 0/0 OME5 LAND ROVER /00 to /0 Freelander V6 & Ltr Diesel DOHC - Wagon 0/0 OME50 To 0/000 Freelander Cylinder Petrol Wagon 0/0 OME50 OME Cartridge to Suit OME Springs NC7 To 0/000 Freelander V6 & Ltr Diesel DOHC 0/0 OME500 OME Cartridge to Suit OME Springs NC7 LEXUS 00 on RX-0 WD MCU8R MY05 - V6 0/0 OME509 MAZDA To 06/006 Tribute YU MY0 MY0 0/0 OME90 Front - Cartridge, Rear - Nitrocharger NC5 NISSAN 007 on X-Trail Petrol 5/5 OME5 X-Trail Diesel 5/5 OME5 00 to 0/06 X-Trail: Front - Petrol - OME506, Diesel - OME507 0/0 OME506 / 507 OME Strut to Suit OME Springs NS+NS SUBARU 7/0 to 005 Forester MY0 MY0 MY05 0/0 OME59 9/0 to 006 Outback th Gen MY0 MY05 MY06 Cyl 0/0 OME56 9/0 to 006 Outback th Gen MY0 MY05 MY06 6Cyl 0/0 OME57 TOYOTA 00 to 0/07 Kluger MCU0R - V6 0/0 OME509 0/006 on Rav LWB ACAR - Cylinder 0/0 OME59 07/00 to 08/05 Rav SWB & LWB ACA0R ACAR - Diesel 0/0 OME799 07/00 to 08/05 Rav SWB & LWB ACA0R ACAR - Petrol 0/0 OME79 OME Struts / Gas Shocks to Suit OME Springs NS+N9S LHS RHS To 000 Rav LWB SXAR MY98 MY99 - Petrol 5/5 OME79 OME Struts / Gas Shocks to Suit OME Springs N07S+N06S LHS RHS To 000 Rav SWB SXAR MY98 MY99 - Petrol 5/5 OME79 OME Struts / Gas Shocks to Suit OME Springs N07S+N06S LHS RHS NOTES:. Refer to pages 6-7 for fitting instructions. OME905 N6 OME5 OME50 OME56 OME58 OME798 N7S OME58 OME908 OME0 OME56 OME5 OME50 OME505 NC8 OME50 NC8 OME50 OME905 N6 OME5 OME5 OME508 N5S+N6S OME50 OME58 OME58 OME50 OME50 OME795 OME795 OME0 OME79 OME0 OME796 OME0 Page 0 OME NO. INT Nov09

13 LTR REMOTE CANISTERS LTR SHOCKS YEAR VEHICLE DESCRIPTION LAND ROVER 9 to 99 Discovery Series I LTR0F R&L LTR0R 8 on Defender & County 90, 0 & 0 LTR05F LTR05R R&L NISSAN /00 on Patrol Y6 (GU) Series II SWB & Wagon LTR07F LTR07R 97 to /00 Patrol Y6 (GU) Series I Wagon & SWB LTR07F LTR07R 97 on Patrol Y6 (GU) Cab Chassis (All Coil Springs) LTR07F LTR07R To 8/89 Patrol Y60 (GQ) Wagon & SWB LTR0F LTR0R 9/89 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis LTR0F LTR0R TOYOTA /98 on LandCruiser 00 Series (IFS) LTR06F /98 on LandCruiser 05 Series (Front Live Axle) LTR0F /90 to 98 LandCruiser 80 Series LTR0F 99 to 006 LandCruiser 78 & 79 Series (6 cylinder models only) LTR09F 9/97 to 0 HiLux LN7, LN67, KZN65, RZN7 & LTR08FL/FR RZN69 (IFS) LTR06R R&L LTR0R R&L LTR0R R&L LTR09R R&L LTR08RL/RR NOTES:. FK8 rear sway bar extension bracket for all models without detachable sway bar and FK for all models with detachable sway bar are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop.. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber. OME66 suits models with mm diameter. OME66 suits models with mm diameter.. Fitment of OME66 stone flap kit is mandatory to prevent damage to piston rod from stone peppering.. LTR05R suits early model defenders where the fuel pump is not mounted inside of the right rear mud guard. Note: Replacement dust boot part numbers: LTR OME5 - Large Replacement dust boot part numbers: LTR OME - Small GASSING REMOTE CANISTER SHOCK ABSORBERS The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve, part number 755, from Schrader Automotive Inc is required to guarantee correct pressure is reached. When using a Schrader valve to gas your LTR Shock absorber first set the pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end of the remote canister. Gas the canister until the shock absorber shaft is fully extended, hold gas pressure for 0 seconds, release Schrader valve and remove. Note: This can be done for you by your Old Man Emu Stockist. Important: Gassing of your LTR shock absorber should be carried out before fitment to the vehicle. If LTRs are already fitted the vehicle's suspension should be at full extension before gassing. MINIMUM/MAXIMUM GAS PRESSURE On Road/Off Road 0-80psi ( BAR) Competition 80-00psi ( BAR) An increase in gas pressure firms up ride quality but will not alter ride height MAINTENANCE The following checks need to be carried out as part of regular vehicle maintenance. To ensure maximum cooling of your LTR shock absorber inspect the shock absorber body and canister for any mud and debris build up and clean if necessary Check that the polyurethane boot is securely fastened in place and that it is not damaged. If the boot is found to be detached thoroughly clean the shock absorber shaft and inside the boot before reattaching it. Ensure all polyurethane bushes, locating washers and nuts are in good condition and securely fastened. To ensure maximum shock absorber performance check gas pressure every 0,000km Page OME NO. INT Nov09

14 COMPETITION SHOCK & SPRING SELECTION WARNING WARRANTY EXCLUSION DISCLAIMER Due to the unusual component design requirements and the severe nature of competition usage, the normal Old Man Emu product warranty conditions do not apply to any products listed on this page. NISSAN PATROL Y60 & Y6 MODELS COMPETITION SHOCKS AND COIL SPRINGS Lift Location Coil Spring Coil Rate Coil Length (mm) Shock Part No. A B Part No. 75mm OME 50 LBS 60 5 N9L OME5 90 LBS N9L 00mm OME 50 LBS N9L OME6 90 LBS N9L 5mm OME 50 LBS N/A OME7 90 LBS N/A TOYOTA LANDCRUISER 80 & 00 SERIES MODELS COMPETITION SHOCKS AND COIL SPRINGS Lift Location Coil Spring Coil Rate Coil Length (mm) Shock Part No. A B Part No. 75mm OME8 00 LBS N7L OME 80 LBS N7L 00mm OME9 00 LBS N7L OME 80 LBS N7L 5mm OME0 00 LBS N/A OME 80 LBS N/A IMPORTANT: The products listed in this selection chart are deemed by Old Man Emu to be suitable only for Off Road use and their legality for public road use should be certified by the relevant Registration Authority. Modifications and replacement of other associated components will be required. Lift increase is approximate and based on standard vehicle weights. Page OME NO. INT Nov09

15 COMPETITION SHOCK & SPRING SELECTION WARNING WARRANTY EXCLUSION DISCLAIMER Due to the unusual component design requirements and the severe nature of competition usage, the normal Old Man Emu product warranty conditions do not apply to any products listed on this page. Nitrocharger L Series Vehicle Jeep JK Jeep XJ Jeep YJ Jeep TJ Jeep ZJ Patrol Y60, Y6 LandCruiser 80, 00 Front Open Closed Rear Open Closed N96L 69 0 N98L 706 N5L N6L 6 66 NL 78 NL 6 66 N66L N67L 6 66 N9L N0L N9L 555 N9L 76 6 N7L N7L Not supplied with Mounting Kit. Use OE Kit. Selection for individual vehicles depends on:. Open and closed length requirements. Vehicle front and rear weight distribution The table below lists suggested selection for various competition vehicle types Vehicle Type Buggies Baja WD - Large - Small Front Rear OME007: per side OME007: per side = Multiple fitment required *OME08: per side OME007: per side OME007: per side OME08: per side N76: per side N76: per side N76: per side N76: per side *HANDLING VARIATION CAN BE CHANGED BY REMOVING ONE SHOCK Shock Characteristics & Specifications Part No Top Mount Lower Mount OME007 Large Eye Large Eye OME08 Large Eye Large Eye N76 Large Eye Large Eye Open Length 600mm 585mm 680mm Closed Length 59mm 59mm 08mm Characteristic Compression Rebound Rebound Warranty Implications The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. Page OME NO. INT Nov09

16 CHRYSLER JEEP GRAND CHEROKEE WH / WK V8 PETROL & DIESEL Estimated Lift: 50mm SPRING: TO 0 KGS STRUT SPRING: TO 00 KGS STRUT Estimated Lift: 55mm SPRING: HEAVY LOAD OME990 N88S OME99 N88S OME99 N90 OME99 N90 JEEP GRAND CHEROKEE WJ & WG Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 90 KGS TRIM PACKER OME96 N OME96 N OMEWJPF0 STABILISER BAR OMESTAB - - Estimated Lift: 0mm SPRING: HEAVY LOAD TRIM PACKER V6 & V8 PETROL ENGINES OME95 N OME96 N OMEWJPF0 OME9 N7 OME95 N7 OMEWTJPR0 DIESEL ENGINES OMESTAB is a lighter rate OME replacement stabiliser bar which is a recommended fitment so maximum ride quality improvement can be obtained. (OMESTAB does not suit Diesel Models). Add only OMEWJPF0 Trim Packer to increase ride height for vehicles with Bull Bar and Winch. Page OME NO. INT Nov09

17 CHRYSLER JEEP GRAND CHEROKEE ZJ Estimated Lift: 0-5mm SPRING: TO 0 KGS SPRING: TO 90 KGS STEERING DAMPER COIL PACKER Estimated Lift: 0-5mm SPRING: CONSTANT 00 KGS COIL PACKER 6 CYLINDER & V8 ENGINES OME9 OME9 *N9 / N9C OME90 OME9 N9 OMESD0 OMEJGF0 OME90 *N0 / 0C OME9 N0 OMEJGR0 OME9 and OME90 suit 6 cylinder models. OME9 suits V8 models. OMESD0 will only fit left hand drive models. JEEP CHEROKEE XJ WAGON 98 ON PETROL & DIESEL ENGINES Estimated Lift: 5-5mm SPRING: OME90 SPORT 6005 *N5 / N5C TRIM PACKER OMEJGF0 STEERING DAMPER Estimated Lift: 50mm SPRING: LIGHT LOAD SPORT 6005 SPRING BUSH KIT U BOLTS GEARBOX PACKER KIT OMESD0 CS0RA / B SPORT 6005 *N6 / N6C CS05RA / B N6 OE OMEU60 OMEU57 XJGK Page 5 Warning: XJ Models fitted with a bolt engine exhaust pipe flange, can experience a clearance problem with the tail shaft, when suspension is under full deflection. Fitment of an adjustable front panhard rod or a change to the smaller bolt flange will provide the required clearance. OMEU60 suits Dana 5 type differential - Australian models. OMEU57 suits AMC 8 / type differential. Trimming requirement greater than 0mm use A/A fitment. Where near level rake is desired B/B fitment should be used. DXL extra leaf can be fitted to CS0RA/B and CS05RA/B for heavier constant load carrying ability. NB: Models fitted with OE Up Country Suspension pack will only be raised by 0mm. OMEJGF0 front coil packer can be used for trimming or extra lift purposes, p using no more than packer. 5 Fit XJGK0 gearbox packer kit should a driveline vibration occur. OMESD0 will only fit left hand drive models. OME NO. INT Nov09

18 CHRYSLER JEEP CHEROKEE/LIBERTY KJ Estimated Lift: 0-0mm SPRING: NO ACCESSORIES STRUT SPRING: TO 50 KGS STRUT SPRING: 5 TO 00 KGS STRUT Estimated Lift: 0mm SPRING: LIGHT LOAD PETROL ENGINES OME95 NS0 OME96 NS OME97 NS OME97 N OME98 N OME96 NS0 OME97 NS OME790 NS DIESEL ENGINES Due to varying OE ride heights, some KJ models may only achieve a 0mm lift. JEEP WRANGLER JK DOOR 006 ON V6 PETROL ENGINE Estimated Lift: 50 mm SPRING: TO 0 KGS OME65 OME66 SPRING: TO 80 KGS OME66 OME69 SPRING: CONSTANT 50 KGS SPRING: CONSTANT 00 KGS OME67 OME68 OME60 SPORT *N98 / N PANHARD ROD EXTENSION BKT KIT - LEFT HAND DRIVE FK7 PANHARD ROD EXTENSION BKT KIT - RIGHT HAND DRIVE FK9.8 DIESEL ENGINE SPORT *N96 / N *N96 / N Estimated Lift: 60mm TRIM PACKER OMEJKPF0 OMEJKPF0 TRIM PACKER OMEJKPR0 For ride height and trim adjustment- Front: OMEJKPF0 Rear: OMEJKPR0. Do not fit more than packer per coil spring. Fitment of Panhard rod extension bracket kit is not mandatory, but fitment will improve the ride feel by locating the panhard rod to its original position. Page 6 OME NO. INT Nov09

19 JEEP WRANGLER JK UNLIMITED 006 ON Estimated Lift: 50 mm SPRING: TO 0 KGS OME66 OME69 SPRING: TO 80 KGS OME69 OME6 SPORT *N96 / N *N96 / N TRIM PACKER OMEJKPF0 OMEJKPF0 Estimated Lift: 60mm SPRING: CONSTANT 50KGS SPRING: CONSTANT 00KGS PANHARD ROD EXTENSION BKT KIT - PANHARD ROD EXTENSION BKT KIT - OME67 OME68 OME60 SPORT LEFT HAND DRIVE RIGHT HAND DRIVE TRIM PACKER CHRYSLER V6 PETROL ENGINE.8 DIESEL ENGINE *N98 / N FK7 FK9 OMEJKPR0 For ride height and trim adjustment use - Front: OMEJKPF0 Rear: OMEJKPR0 Do not fit more than packer per coil spring. Fitment of Panhard rod extension bracket kit is not mandatory, but fitment will improve the ride feel by locating the panhard rod to its original position. Page 7 OME NO. INT Nov09

20 CHRYSLER JEEP WRANGLER TJ & TJ UNLIMITED 6 CYLINDER ENGINE Estimated Lift: 50mm SPRING: TO 0 KGS SPORT OME9 *6007 / 6006 *N66 / N66C SPRING: TO 80 KGS OME9 SPORT *6007 / 6006 TRIM PACKER STEERING DAMPER N66 OMEJGF0 OMESD DOOR UNLIMITED Estimated Lift: 50mm SPRING: SOFT TOP OME9 OME99 SPORT N67 N67 SPRING: HARD TOP OME9 OME99 SPORT N67 N67 SPRING: CONSTANT 00 KGS OME9 - SPORT N67 - SPRING: CONSTANT 00 KGS OME99 6 OME996 SPORT N67 N67 PANHARD ROD BRACKET KIT FKWTJ0 FKWTJ0 FKWTJ0 FKWTJ0 TRIM PACKER OMEWTJPR0 OMEWTJPR0 GEARBOX PACKER KIT BUMPER STOP SPACER KIT FK6 FK6 5 6 For ride height and trim adjustment use - Front: OMEJGF0 Rear: OMEWTJPR0 FKWTJ0 panhard rod extension bracket kit fitment to right hand drive or FKWTJ0 to left hand drive models is mandatory to ensure correct rear axle tracking. A Gear box packer kit is mandatory fitment to prevent driveline vibration. JWGK0 suits all models to 00. JWGK0 suits manual models from 00. JWGK0 suits auto models from 00. FK6: Mandatory fitment 0mm bump stop spacer kit to prevent coil springs becoming solid on full compression. OMESD0 only suitable for fitment to left hand drive models. To achieve optimal vehicle balance front to rear when Rear Spring OME99 is fitted, it is recommended that only 6007 is fitted to the front. Page 8 OME NO. INT Nov09

21 CHRYSLER JEEP WRANGLER YJ Estimated Lift: 0-50mm SPRING: TO 5 KGS: 50mm SPRING: TO 95 KGS: 0mm SPRING BUSH KIT GEAR BOX PACKER KIT GREASABLE SHACKLE KIT STEERING DAMPER Estimated Lift: 50mm SPRING: HARD TOP MEDIUM LOAD TO 00 KGS SPRING: SOFT TOP LIGHT LOAD SPRING BUSH KIT GREASABLE SHACKLE KIT JWGK0 fitment reduces driveline vibration. OMESD0 will only fit left hand drive models. PETROL ENGINES CS0F N CS0F N OMESB57 OMESB87 JWGK0 OMEGS OMESD0 CS06R N CS07R N OMESB57 OMESB87 OMEGS Use OMESB57 with original shackles. OMESB87 with OMEGS greasable shackles. Page 9 OME NO. INT Nov09

22 FORD RANGER PJ /006 ON PETROL & DIESEL ENGINES TORSION BARS: OVER 60 KGS 00 SPORT 600 *N9 / N87 FITTING KIT FK Estimated Lift: 0mm CS056R SPORT 600 N89 SPRING: CONSTANT 00 KGS CS09R SPORT 600 N89 GREASABLE SHACKLE KIT OMEGS8 U BOLTS OMEU66 SPRING BUSH KIT OMESB97 FK Front Shock absorber upper mount support bracket kit is a mandatory fitment. COURIER/RANGER TONNE PETROL & DIESEL ENGINES TORSION BARS: OVER 60 KGS 0005 SPORT 600 N5 FITTING KIT FK Estimated Lift: 0mm CS06R SPORT 600 *N5 / N5C SPRING: CONSTANT 00 KGS CS07R SPORT 600 N5 U BOLTS OMEU65 GREASABLE SHACKLE KIT OMEGS8 SPRING BUSH KIT OMESB8 FK support brackets must be installed to upper front shock mounting brackets on late 996 on models manufactured in Thailand. Page 0 OME NO. INT Nov09

23 FORD FORD EXPLORER LEAF SPRING MODELS V6 PETROL ENGINE TORSION BARS - Estimated Lift: 0 mm N6 CS0R N7 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. OE spring bushes are required to fit CS0R springs. D0XL extra leaf should be fitted when a constant 00kg plus load is carried. FORD F50 & F V8 DIESEL: COIL SPRING Estimated Lift: 5mm SPRING: TO 00 KGS CASTER CORRECTION KIT Estimated Lift: 60+mm THIRD STAGE SPRING:CONSTANT 600+KGS XL LEAF CENTRE BOLT U BOLTS - NO OVERLOAD LEAF U BOLTS - WITH OVERLOAD LEAF FITTING KIT SPACER KIT OME768 N95 FK6 CS08R TSXL0 CS08R D7XL UCB0 N79 OMEU68 OMEU67 FK FK5 OMESK LEAF SPRING Springs are supplied with bushes fitted. Where the OE spring has an overload leaf fitted, it must be replaced with a TSXL0 and the CS08R original centre bolt replaced by a UCB0, the original spacing block must also be re-fitted using U Bolts OMEU67. To maintain 60mm lift for loads over constant 600 KGS and add D7XL Extra Leaf. Fitment of Driveline Spacer Kit FK for Crew Cab or FK5 for Xtra Cab is recommended to reduce possible driveline vibration. If required, additional spacing down of the centre bearing can be achieved by using an OMESK Spacer kit. Fitment of a FK6 Caster Correction Kit will provide approximately.5 to.0 degrees of extra caster. It is advisable to have a Front End Alignment carried out to determine if a FK6 kit is required Page OME NO. INT Nov09

24 FORD FORD F50 & F F50 PETROL & DIESEL F50 PETROL & DIESEL Estimated Lift: 60mm SPRING: TO 50 KGS CS08F 6 CS08F 6 N78 N78 ADJUSTABLE PANHARD ROD APRF50 APRF50 U BOLTS - USA MODELS OMEU69 OMEU69A OMEU69 U BOLTS - BRAZIL MODELS OMEU70 - OMEU70A - Estimated Lift: 60mm SPRING: TO 600 KGS THIRD STAGE - SINGLE FITMENT - DUAL FITMENT SPRING: CONSTANT 600 KGS XL LEAF THIRD STAGE - SINGLE FITMENT - DUAL FITMENT U BOLTS F50 F50 CS08R 5 CS08R 5 - TSXL0 5 N79 N79 N79 + N CS08R CS08R D7XL D7XL - TSXL0 5 N79 N79 N79 + N OMEU68 OMEU67 FK FK FITTING KIT FK5 FK5 FITTING KIT OME660 OME APRF50 Adjustable Panhard Rod must be fitted to allow original axle location to be restored, bushes are supplied in Rod. For models with dual shock fitment N79 must be fitted rear of the axle, as it is longer than the N80. OME660 stone shields are also a recommended fitment to the rear shocks. To help maintain 60mm lift, add one D7XL Extra Leaf for every 00 KGS carried over 600 KGS. Fitment of FK to Crew Cab or FK5 to Xtra Cab models is recommended to reduce possible driveline vibration. As the CS08R has a different spring camber, compared to the original spring, the overload leaf must be replaced with a TSXL0. The Original spacing block must be refitted. Springs are supplied with bushing. Springs are supplied with bushing. Page OME NO. INT Nov09

25 HOLDEN / ISUZU / GM JACKAROO/TROOPER & MONTEREY /00-00 SWB & LWB TORSION BARS SPORT 600 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS - *N65 / N6F OME99 *N5 / N5C OME99 N5 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Coil must be installed with progressive rate to the top. JACKAROO/TROOPER & MONTEREY 99 - /00 SWB & LWB TORSION BARS - SPORT 600 Estimated Lift: 5mm SPRING: CONSTANT 00 KGS *N65 / N6F OME9 *N5 / N5C OME99 N5 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Coil must be installed with progressive rate to the top. Page OME NO. INT Nov09

26 HOLDEN / ISUZU / GM JACKAROO/ISUZU TROOPER 98 - /99 TORSION BARS: OVER 50 KGS 000 SPORT 600 *N65 / N6F Estimated Lift: 0mm SPORT SPRING: CONSTANT 00 KGS SPORT SPRING BUSH KIT U BOLTS ANTI INVERSION KIT GREASABLE SHACKLE KIT CS08R N88 *N / N89 CS09R *6006 / *6006 / 600 N88 N OMESB80 OMEU59A FK OMEGS Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Torsion Bar 000 suit models from 8/88 to /9 only. Important: A minimum of 60mm of droop must be maintained / 6006 / N88: Suits /'86 to /'9 models and requires OMEB bush kit to convert lower bush from 9mm to 6mm ID / 600 / N / N89: Suits models '8 to 0/'86 (no bush kit required). Where the OE spring has leaves OMEU59A U Bolts are required. FK Anti Inversion kit must be fitted if greasable shackles are not fitted. GM ERA 5 DOOR 999-6/00 TORSION BARS - SPORT 600 *N65 / N6F Estimated Lift: 0mm OME9 N0 Page OME NO. INT Nov09

27 HOLDEN / ISUZU / GM GM ERA & DOOR UT MODELS TORSION BARS - SPORT 600 *N65 / N6F Estimated Lift: 0mm OME9 N5C COLORADO RC 008 ON RODEO/D-MAX RA 00 ON PETROL ENGINE TORSION BARS - NO LOAD 00 SPORT 600 Estimated Lift: 0-50mm SPORT SPRING: CONSTANT 00 KGS SPORT SPRING BUSH KIT U BOLTS ANTI INVERSION KIT GREASABLE SHACKLE KIT N65 N50 CS06R 600 *N / N89 CS06R *6006 / 600 OMESB80 OMEU66 FK6 OMEGS DIESEL ENGINE N65 Fit N65 when installing 00 Torsion Bar to Petrol Models and N50 for OE Torsion Bars. N Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers may contact the steering arm when on full lock. Fitter should check for this and where required a small indentation should be made to the body of the shock absorber. 00 Torsion Bars have a lighter rate than OE and improve ride comfort for vehicles with no front accessory weight. Due to their heavy rate, the OE Torsion Bars are suitable for Vehicles with front accessory weight. CS06R and CS06R can be installed to x Models. Page 5 OME NO. INT Nov09

28 HOLDEN / ISUZU / GM RODEO/D-MAX TO 00 TORSION BARS: OVER 50 KGS SPORT 600 Estimated Lift: 0mm SPORT SPRING: CONSTANT 00 KGS SPORT SPRING BUSH KIT ANTI INVERSION KIT GREASABLE SHACKLE KIT U BOLTS PETROL & DIESEL ENGINES 000 *N65 / N6F CS08R 600 *N / N89 CS09R *6006 / 600 N OMESB80 FK OMEGS OMEU59A ` Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. FK must be fitted if OMEGS greasable shackles are not fitted. DROVER Estimated Lift: 0mm SPRING: 5 TO 75 KGS SPRING BUSH KIT TRIM PACKER Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS Vehicles with Leaf OE Spring Stack require U bolts OMEU59A. SPRING: TO 5 KGS U BOLTS FITTING KIT STEERING DAMPER TRIM PACKER CS0FA / B OME05 CS0FA / B OME05 OMESB9 OMEU6 FK06 TP05 OMESD0 CS08R OME0 CS09R OME0 OMESB9 OMEU6 TP only OMEU6 may be required on the right hand side inner, on some models. ` Page 6 OME NO. INT Nov09

29 HYUNDAI TERRACAN 00 ON PETROL ENGINES DIESEL ENGINES Estimated Lift: 0mm TORSION BARS - - SPORT UNDER DEVELOPMENT 6000 N70 N6 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS OME60 N7 OME60 N7 KIA SORENTO Estimated Lift: 0mm SPRING: SPRING: 0 TO 60 KGS STRUT Estimated Lift: 0mm SPRING: LIGHT LOAD OME90 OME60 N8S N7S + LHS RHS LATE 006 ON MODELS MODELS 00 TO LATE OME60 - N9 OME6 OME90 N05 N9 OME66 Stone Guards are recommended fitment to vehicles driven on dirt roads to prevent stone damage to the shock absorbers. N7S fits RHS, N8S fits LHS. Page 7 OME NO. INT Nov09

30 LADA NIVA LADA NIVA Estimated Lift: 0mm SPRING: TRIM PACKER Estimated Lift: 0mm OME79 NOT AVAILABLE OMELNF0 OME79 NOT AVAILABLE Page 8 OME NO. INT Nov09

31 LAND ROVER DISCOVERY 005 ON ALL COIL MODELS PETROL & DIESEL ENGINES Estimated Lift: 50mm SPRING: SPRING: 00 KGS + STRUT OME7 OME75 USE OE Estimated Lift: 50mm OME76 SPRING: CONSTANT 00 KGS OME7 STRUT USE OE Coils are suitable to be used with original OE struts, OME will not be developing replacement struts. DISCOVERY ALL COIL SUSPENSION MODELS PETROL & DIESEL ENGINES Estimated Lift: 0mm SPRING: TO 0 KGS OME776 SPORT 600 SPRING: TO 50 KGS SPORT 600 SPRING: 5 TO 0 KGS STEERING DAMPER SPORT 6006 SPORT OME779 SPORT 600 COIL PACKER Estimated Lift: 0mm SPRING: CONSTANT 00 KGS COIL PACKER OME777 OMESD0 OMELRCP *N08 / N08C SPORT 6005 N08 SPRING: CONSTANT 00 KGS *N07 / N07C *N07 / N07C N07 OME78 OME76 OME N08 OMELRCP On 00 models lift will be between 5 to 5mm. 8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat Page 9 OME NO. INT Nov09

32 LAND ROVER DISCOVERY TO 998 & RANGE ROVER TO 5/995 PETROL ENGINES Estimated Lift: To 0mm SPRING: TO 0 KGS: 0mm OME75 OME767 SPORT N5 N5 STEERING DAMPER CASTER KIT SPORT OME760 SPORT 6007 *N5 / N5F SPRING: TO 50 KGS: 0mm SPORT SPRING: 5 TO 0 KGS COIL PACKER Estimated Lift: 0mm SPRING: CONSTANT 00 KGS OME *N5 / N5F *N5 / N5F OME767 OMESD CALR CALR OMELRCP OME *N6 / N7 SPORT 6009 *N / N6 SPRING: CONSTANT 00 KGS SPORT COIL PACKER OME76 OME N OMELRCP OMESD DIESEL ENGINES CALR CALR OMELRCP CALR : Fits pre '86 Range Rover. CALR : Fits post '86 Range Rover, all Discovery & Defender 0 Dual Cab Utility. NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems. 8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. Page 0 OME NO. INT Nov09

33 LAND ROVER DEFENDER & COUNTY 0 V8 PETROL Estimated Lift: To 0mm SPRING: TO 50 KGS: 0mm SPRING: 5 TO 0 KGS OME76 SPORT 6007 N5F OME75 SPORT 6007 N5 STEERING DAMPER OMESD CASTER KIT COIL PACKER CALR CALR OMELRCP OME *N5 / N5F OME766 OMESD CALR.9 ISUZU DIESEL ENGINE 6007 N5 OMELRCP.5 DIESEL Estimated Lift: To 0mm SPRING: TO 50 KGS: 0mm OME75 SPORT 6007 N5F SPRING: 5 TO 0 KGS OME767 SPORT 6007 N5 STEERING DAMPER OMESD CASTER KIT CALR CALR COIL PACKER OMELRCP Estimated Lift: To 55 mm SPRING: LIGHT LOAD: 5mm OME75 SPORT 6008 *N6 / N7 SPRING: CONSTANT 00 KGS OME755 SPORT 6009 N SPRING: CONSTANT 500 KGS OME75 SPORT 6009 N COIL PACKER OMELRCP Caution: Due to altered gearbox mounts on models after 998 any lift above OE ride height may cause front driveline vibration that can only be rectified by fitment of front Double Cardan joints. Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if caster kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. OME75 coil has a softer spring than OE coil. This is to provide improved ride quality with light loads only OE springs are designated as medium load springs. Original inner helper coil, where fitted, must be re-installed with OME Coils. 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: t To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat Page OME NO. INT Nov09

34 LAND ROVER DEFENDER 0 MODELS Estimated Lift: 0mm SPRING: TO 50 KGS SPORT OME *N5 / N5F SPRING: 5 TO 0 KGS OME767 SPORT 6007 STEERING DAMPER CASTER KIT COIL PACKER Estimated Lift: To 0mm SPRING: LIGHT LOAD: 5mm SPORT SPRING: CONSTANT 00 KGS N5 OMELRCP OME *N / N6 OME75 SPORT 6009 COIL PACKER Estimated Lift: 0mm SPRING: TO 50 KGS.5 DIESEL ENGINE OMESD CALR OMELRCP DIESEL ENGINES N OME76 SPORT 6007 SPORT 6007 STEERING DAMPER CALR 6008 SPORT 6009 Caution: Due to altered gearbox mounts on models after 998 any lift above OE ride height will cause front driveline vibration that can only be rectified by fitment of front Double Cardan joints. Caster Kit will increase caster angle by 0. Check manufacturer's specifications to determine if caster kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. Important: OME755 has reduced spring rate from OE to provide improved ride quality for light loads. Original inner helper coil, where fitted, must be re-installed with OME Coils. 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: To prevent possible overstressing of the spring, only one packer can be fitted under each coil seat. Original inner helper coil, where fitted, must be re-installed with OME Coils. 90 SERIES PETROL ENGINES DIESEL ENGINES SPRING: 5 TO 0 KGS CASTER KIT Estimated Lift: 5-55mm SPORT SPRING:CONSTANT 00 KGS N5F OME75 N5 OMESD OME76 *N6 / N7 OME76 *N / N6 OME75 OME767 OMESD CALR 6007 N Caution: Due to altered gearbox mounts on models after 998 any lift above OE ride height may cause front driveline vibration that can only be rectified by fitment of front Double Cardan joints. Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if caster kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. N5 Page OME NO. INT Nov09

35 MAZDA BT50 TONNE /006 ON PETROL & DIESEL ENGINES Estimated Lift: 0mm SPRING: CONSTANT 00 KGS FK CS056R SPORT 600 N89 CS09R SPORT 600 GREASABLE SHACKLE KIT U BOLTS SPRING BUSH KIT TORSION BARS: OVER 60 KGS 00 SPORT 600 FITTING KIT *N9 / N87 N89 OMEGS8 OMEU66 OMESB97 FK Front shock absorber upper mount supporting bracket kit is a mandatory fitment. B SERIES TONNE PETROL & DIESEL ENGINES TORSION BARS: OVER 60 KGS SPORT 600 FITTING KIT Estimated Lift: 0mm SPORT 600 SPRING: CONSTANT 00 KGS SPORT 600 U BOLTS GREASABLE SHACKLE KIT SPRING BUSH KIT 0005 N5 FK CS06R *N5 / N5C CS07R N5 OMEU65 OMEGS8 OMESB8 FK Front shock absorber upper mount supporting bracket kit is a mandatory fitment. Page OME NO. INT Nov09

36 MITSUBISHI PAJERO / MONTERO NS, NP & NM 000 ON LWB V6 PETROL ENGINE Estimated Lift: 5mm SPRING: TO 50 KGS OME95 STRUT - SPORT STRUT N9S N9S SPRING: 5 TO 00 KGS OME95 OME9 STRUT - SPORT STRUT Estimated Lift: 0mm SPORT 6009 SPRING: CONSTANT 00 KGS SPORT SPRING: CONSTANT 00 KGS OME9 N0S OME97 *N5/N0 OME *N0/N5 OME995 SPORT 600 N0 It is recommended that a wheel alignment is carried out..8 &. DIESEL ENGINES N0S PAJERO / MONTERO NS, NP & NM 000 ON SWB V6 PETROL ENGINE Estimated Lift: 5mm SPRING: TO 50 KGS OME9 STRUT - SPORT STRUT *N9S/N09S SPRING: 5 TO 00 KGS OME95 STRUT - SPORT STRUT Estimated Lift: 0mm *N0S/N9S OME99 SPORT 6009 *N5/N0 SPRING: CONSTANT 00 KGS OME97 SPORT 600 *N0/N5 It is recommended that a wheel alignment is carried out. OME95 OME9. DIESEL ENGINES N9S N0S Page OME NO. INT Nov09

37 MITSUBISHI PAJERO / MONTERO SWB & LWB LEAF SPRING MODELS TORSION BARS: OVER 50 KGS SPORT Estimated Lift: 5-50mm SPORT SPRING: CONSTANT 50 KGS SPORT SPRING BUSH KIT GREASABLE SHACKLE KIT N8 CS0R *N56 / N5 CS0R *6006 / N56 OMESB8 OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 000 suits 88 to 90 V6 models and all models 9 to 9 - length 78mm. 00 suits all models 95 to 00 - length 08mm. OMESB8 must be used to fit OME springs. PAJERO / MONTERO ALL LWB COIL SPRING MODELS TORSION BARS: OVER 50 KGS SPORT Estimated Lift: To 0mm SPORT SPRING: CONSTANT 00 KGS SPORT N8 OME N6 OME N6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 000 suits all models 9 to 9 with 78mm length. 00 suits all models 95 to 00 with 08mm length. Page 5 OME NO. INT Nov09

38 MITSUBISHI PAJERO / MONTERO ALL SWB COIL SPRING MODELS SPORT 600 TORSION BARS - SPORT 6000 N8 Estimated Lift: 0mm OME9 N6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. PAJERO / MONTERO TO 99 LEAF SPRING MODELS (Hyundai Galloper) Estimated Lift: 5-50mm TORSION BARS: OVER 50 KGS 0009 SPORT 6005 N60G CS0R SPORT *N56 / N5 SPRING: CONSTANT 50 KGS CS0R SPORT *6006 / N56 SPRING BUSH KIT OMESB8 U BOLTS GREASABLE SHACKLE KIT CYLINDER ENGINE OMEU5 OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained suits 8 to 90 cylinder models - length 78mm. OMESB8 must be used with CS0R and CS0R springs. OMEU5 only required on SWB models. Page 6 OME NO. INT Nov09

39 MITSUBISHI PAJERO CHALLENGER COIL SPRING MODELS (Hyundai Galloper) TORSION BARS: OVER 50 KGS 000 SPORT 6005 N60G Estimated Lift: 5mm OME90 SPORT N6G Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 000 suits 88 to 90 V6 models. TRITON / L00 ML 006 ON DIESEL ENGINE Estimated Lift: 0mm SPRING: TO 50 KGS STRUT - SPORT OME6 STRUT - SPORT STRUT N86S N86S SPRING: 5 TO 00 KGS STRUT Estimated Lift: 0mm SPORT SPRING: CONSTANT 00 KGS SPORT U BOLT SPRING BUSH KIT GREASABLE SHACKLE KIT OME605 OME606 N86S CS05R 6006 *N59 / N5 CS05R 6006 N59 OMEU7 OMESB8 OMEGS6 Springs can be only installed with OME Bush Kit. OME605 OMEGS6 is a mandatory fitment to prevent springs from inverting. V6 PETROL ENGINE N86S Page 7 OME NO. INT Nov09

40 MITSUBISHI TRITON / L00 MK 0/ PETROL & DIESEL ENGINES TORSION BARS: OVER 50 KGS PART NUMBER SPORT 6000 Estimated Lift: To 0mm CS0R SPORT N0E SPRING: CONSTANT 00 KGS CS0R SPORT U BOLTS N0E OMEU57 SPRING BUSH KIT ANTI-INVERSION KIT GREASABLE SHACKLE KIT 0006 *N8 / N57G OMESB8 FK0 OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. OME springs can only be installed with OME bush kits. FK0 Anti-Inversion kit is a mandatory fitment, with or without Greasable Shackle Kit. TRITON / L00 TO 996 TORSION BARS: OVER 50 KGS 0006 SPORT 6005 N60G Estimated Lift: To 0mm CS0R SPORT N0E SPRING: CONSTANT 00 KGS CS0R SPORT N0 U BOLTS OMEU57 SPRING BUSH KIT OMESB8 ANTI-INVERSION KIT FK0 GREASABLE SHACKLE KIT OMEGS6 PETROL & DIESEL ENGINES Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Torsion Bar 0006 suits 99 MJ on models with 9 splines. OME springs can only be installed with OME bush kits. FK0 Anti-Inversion kit is a mandatory fitment, with or without Greasable Shackle Kit. Page 8 OME NO. INT Nov09

41 MITSUBISHI CHALLENGER / MONTERO SPORT LWB COIL MODELS TORSION BARS: OVER 50 KGS SPORT 6000 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS PART NUMBER V6 PETROL ENGINE 00 N57G OME9 N6 OME90 N6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. CHALLENGER V6 / MONTERO WAGON 998 ON ( LEAF SPRING MODELS) TORSION BARS: OVER 50 KGS 00 SPORT 6000 Estimated Lift: 5mm SPORT SPRING: CONSTANT 00 KGS SPORT *6006 / SPRING BUSH KIT GREASABLE SHACKLE KIT N57G CS00R *N56 / N5 CS0R N56 OMESB8 OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 00 suits all models with bar - length 08mm. OMEGS6 is a mandatory fitment to prevent springs from inverting. Springs can be only installed with OME Bush Kit. The Centre Bolt on CS00R must be reversed prior to fitment. Page 9 OME NO. INT Nov09

42 NISSAN PATROL GU Y6 ALL LWB MODELS Estimated Lift: 50mm SPRING: TO 50 KGS CASTER KIT OMESD STEERING DAMPER 5 OMESD0 OME97 OME970 OME97 OMECA77B OIL PAN PACKER KIT FK5 FK5 Estimated Lift: 50mm OME970 SPORT 600 SPRING: 5 TO 0 KGS SPORT 600 SPRING: 50 KGS: 0mm LIFT SPORT 600 TRIM PACKER SPORT SPRING: CONSTANT 00 KGS PETROL.5,.8 & DIESEL. *N9 / N9C OME97 N9 OME97 *N9 / N9C OMECA77B OMEGQPF05 OMEGQPF0 SPORT 6005 SPRING: MEDIUM 0mm LIFT OME98 SPORT 600 TRIM PACKER SWAY BAR EXT KIT OME *N9 / N9C OME98 N9 *N9 / N9C Do not use Packers FK8 FK Coil trim packers may be required to trim vehicles. Packers must be installed to the bottom of front coils. DIESEL.8 &.0 TURBO 600 *N9 / N9C 600 N9 600 *N9 / N9C OMESD OMESD0 OMEGQPF05 OMEGQPF0 OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK5 may be required for some European models when caster kit is fitted. FK8: Rear sway bar extension bracket is mandatory fitment to models with fixed sway bar to prevent damage to sway bar when suspension is at full extension. FK suits models with detachable sway bar. Special Note: Due to limited clearance between tailshaft and chassis cross member, OME does not recommend fitment of gear box packers. 5 OMESD steering damper fits all models up to /000. OMESD0 fits /000 models on. To verify correct fitment for individual vehicles compare OE Mounts with Steering Stabilisers Specifications on Page. 5 Page 0 OME NO. INT Nov09

43 NISSAN PATROL GU Y6 SWB Estimated Lift: 0mm SPRING: TO 50 KGS OME97E SPORT 600 *N9 / N9C SPRING: 5 TO 0 KGS OME97E SPORT 600 N9 TRIM PACKER STEERING DAMPER CASTER KIT OIL PAN PACKER KIT Estimated Lift: 0mm SPRING: LIGHT LOAD SPORT SPORT SPRING: CONSTANT 00 KGS TRIM PACKER OMESD0 fits /000 on models. OMESD fits all models to / &.0 TURBO DIESEL OMEGQPF05 OMEGQPF0 OMESD0 OMESD OMECA77B FK5 OMEGQ0A 600 *N9 / N9C OMEGQ0B 600 *N9 / N9C OMEGQ0D SPORT 6005 SWAY BAR EXT KIT GEAR BOX PACKER KIT 5 N9 FK8 FK GQGK0 OMEGQPR05 OMEGQPR0 OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK5 Oil Pan Kits must be installed when fitting GQGK0 Gear Box Packer Kit. When installing caster kit OMECA77B an additional FK5 oil pan kit is required. FK8: Rear sway bar extension bracket is mandatory fitment to models with fixed sway bar to prevent damage to sway bar when suspension is at full extension. FK suits models with detachable sway bar. GQGK0 Gear Box Packer Kit is designed to space down the gear box cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. In some cases kits may be required. 5 Page OME NO. INT Nov09

44 NISSAN PATROL GU Y6 ALL COIL CAB CHASSIS MODELS ALL. DIESEL ENGINES Estimated Lift: 50mm CASTER KIT TRIM PACKER Estimated Lift: 50mm OMEGQPF05 OMEGQPF0 OME98 SPORT 600 N9 SPRING: CONSTANT 00 KGS OME98 SPORT 6005 SPRING: TO 50 KGS OME970 SPORT 600 SPRING: 5 TO 0 KGS *N9 / N9C OME97 SPORT STEERING DAMPER SPRING: CONSTANT 00 KGS 600 N9 OMESD OMECA77B N9 SPORT 6005 FITTING KIT TRIM PACKER OME985 N9 FK8 Do not use Packers OME *N9 / N9C OME970 OMESD OMECA77B.0 TURBO DIESEL ENGINES 600 N9 OMEGQPF05 OMEGQPF0 OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. Coil trim packers may be required to trim vehicle to a maximum of 5mm. Packers must be installed to the bottom on front coil. FK8 rear sway bar extension bracket is mandatory fitment to prevent damage to sway bar when suspension is at full extension. Page OME NO. INT Nov09

45 NISSAN PATROL GU Y6 CAB CHASSIS COIL: / LEAF: ALL. DIESEL ENGINES.0 TURBO DIESEL ENGINES Estimated Lift: 50mm SPRING: TO 50 KGS OME970 OME97 SPORT *N9 / N9C *N9 / N9C SPRING: 5 TO 0 KGS OME97 OME970 SPORT N9 N9 STEERING DAMPER OMESD OMESD CASTER KIT OMECA77B OMECA77B TRIM PACKER OMEGQPF05 OMEGQPF05 OMEGQPF0 OMEGQPF0 Estimated Lift: 50mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT ANTI INVERSION KIT GREASABLE SHACKLE KITS CS06RA / B N5 CS06RA / B N5 OMESB6 FK08 OMEGS OMEGP + + Coil trim packers may be required to trim vehicle to a maximum of 5mm per coil. Packers must be installed to the bottom on front coils. OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK08 anti inversion kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. For improved ride quality on vehicles carrying medium loads remove the rd leaf. Page OME NO. INT Nov09

46 NISSAN PATROL GQ Y60 ALL SWB & LWB MODELS. ENGINES Estimated Lift: 0-50mm SPRING: TO 50 KGS SPRING: 5 TO 0 KGS SPORT STEERING DAMPER OME975 SPORT 600 *N / NF SPORT 600 SPRING: 50 KGS: 0mm LIFT TRIM PACKER CASTER KIT Estimated Lift: 0-50mm SPRING: LIGHT LOAD OME976 N OME *N / NF OMEGQPF05 OMEGQPF0 OMESD6 OMESD OMECA77B OMEGQ0C OME97 OME97.8 &.0 ENGINES 600 *N / NF 600 OMECA77B OMEGQ0CM SPORT NF NF OMEGQ0AM OMEGQ0C SPORT 600 SPRING: CONSTANT 00 KGS SPORT 6005 LWB MODELS 5 N NOT APPLICABLE - - OMEGQPF05 OMEGQPF0 OMESD6 OMESD SWB MODELS OMEGQ0G OMEGQ0LP OMEGQ0LP SPORT N9 N9 TRIM PACKER Do not use Packers Do not use Packers GEAR BOX PACKER KIT GQGK0 GQGK0 5 LPG CONVERSIONS Coil trim packers may be required to trim vehicle to a maximum of 5mm per coil. Packers must be installed to the top on rear coils and to the bottom on front coils N9 LPG CONVERSIONS OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. LPG conversion equated to 00-5 litre rear mounted gas tank and a litre mid mounted auxiliary petrol tank. OMESD6 fits 8/89 models onwards. OMESD fits pre 8/89 models. *N9 / NF OMEGQ0J N9 Gearbox packer kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. *N9 / NF 5 Page OME NO. INT Nov09

47 NISSAN PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS. ENGINES Estimated Lift: 50mm TRIM PACKER STEERING DAMPER CASTER KIT Estimated Lift: 0-50mm SPRING: TO 50 KGS OME975 SPORT 600 SPRING: 5 TO 0 KGS NF OME976 SPORT 600 N OMEGQPF05 OMEGQPF0 OMESD6 OMECA77B 0mm LIFT OMEGQ0C SPORT 600 NF SPRING: CONSTANT 00 KGS OMEGQ0J SPORT 6005 TRIM PACKER GEAR BOX PACKER KIT OMEGQPR05 OMEGQPR0 GQGK0 Coil trim packers may be required to trim vehicle to a maximum of 5mm per coil. Packers must be installed to the top on rear coils and to the bottom on front coils. N9 OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. Gearbox packer kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. Page 5 OME NO. INT Nov09

48 NISSAN PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS. ENGINES Estimated Lift: 0mm SPRING: TO 50 KGS SPRING: 5 TO 0 KGS SPRING BUSH KIT GREASABLE SHACKLE KITS STEERING DAMPER Estimated Lift: 5mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 600 KGS SPRING BUSH KIT GREASABLE SHACKLE KITS U BOLTS CS00F N8 CS00F N8 OMESB OMEGS OMEGP OMESD CS06RA / B N5 CS06RA / B N5 OMESB6 OMEGS OMEGP OMEU58B ANTI INVERSION KIT FK CBS0 x centre bolt spacers required for front spring fitment. FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. For improved ride quality on vehicles carrying medium loads remove the rd leaf. PATROL MQ 60 LWB SPANISH BUILT ALL.8TD MODELS PETROL & DIESEL ENGINES Estimated Lift: 0-0mm SPRING: TO 50 KGS SPRING: 5-00 KGS SPRING BUSH KIT U BOLTS Estimated Lift: 50mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS CS06F *N9/N9C CS06F N9 OMESB OMESB9 OMEU56 OMEU57 CS0R N89 CS0R * N / N89 OMESB OMESB9 OMEU58 To improve ride quality remove rd leaf from top of spring. Front U Bolt: OMEU56 fits to right hand side. OMEU57 fits to left hand side. Page 6 OME NO. INT Nov09

49 NISSAN PATROL MQ M60 Estimated Lift: 0-0mm SPRING: TO 50 KGS SPRING: 5 TO 0 KGS SPRING BUSH KIT SPRING BUSH KIT U BOLTS STEERING DAMPER Estimated Lift: 50mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS Front spring bushes: Early model (round headlight) require OMESB8 and OMESB9. Late model (square headlight) require OMESB and OMESB9. Front U bolt : OMEU56 fits to right hand side. OMEU57 fits to left hand side. PETROL & DIESEL ENGINES CS00FA / B EARLY *N7/N96 LATE N9 CS0FA / B EARLY *N7/N96 LATE N9 OMESB8 OMESB9 OMESB OMESB9 OMEU56 OMEU57 OMESD CS0R N97 CS0R N8 OMESB OMESB9 OMEU OME bush kits must be used to enable springs to be fitted. Models with P0 litre engine require CS0FA / B springs. Individual vehicles fitted with A / B fitment may experience a pronounced trimming problem to right hand side. In these cases fitment of an XL leaf to the right hand side will correct problem. Page 7 OME NO. INT Nov09

50 NISSAN NAVARA D0 005 ON Estimated Lift: 0mm SPRINGS: TO 0 KGS STRUT - SPORT STRUT SPRINGS: TO 80 KGS SPRING BUSH KIT OME608 STRUT - SPORT 9000 STRUT Estimated Lift: 0mm SPORT SPRING: CONSTANT 00 KGS SPORT SPRING BUSH KIT GREASABLE SHACKLE KIT U BOLTS DIESEL & V6 PETROL OME N8S N8S CS50R 6007 N85 OMESB99 OMESB00 CS05R 6007 N85 OMESB95 OMESB96 OMEGS5 OMEU5A OE plastic stone shield must be refitted. CS50R: Use: OMESB99 with OE Shackles. CS05R: Use: OMESB95 with OE Shackles. OMESB00 when installing OMEGS5. OMESB96 when installing OMEGS5. OE U Bolt plate bolt holes may need to be enlarged when fitting OME U Bolts. NAVARA D 0/00 ON NP ON TORSION BARS: OVER 50 KGS 0007 SPORT 600 N5 Estimated Lift: 0mm SPORT SPRING: CONSTANT 00 KGS SPORT 6005 SPRING BUSH KIT U BOLTS CS0R 6005 N56 CS0R N59 OMESB9 OMEU6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. For Constant 00kg loads, add D8XL to CS0R. Page 8 OME NO. INT Nov09

51 NISSAN NAVARA D & D TO 8/00 TORSION BARS: OVER 50 KGS Estimated Lift: 0mm SPRING: CONSTANT 00 KGS U BOLTS SPORT 600 N58 STEERING DAMPER SPRING BUSH KIT CS00R SPORT 6005 N56 SPORT OMESD5 CS0R 6005 N59 OMESB8 OMEU6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars suits D & 0008 suits D models. Important: A minimum of 60mm of droop must be maintained. It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. On later models steering damper was not fitted. Check vehicle to confirm it does have an original steering damper fitted. For constant 00kg loads, add D8XL to CS0R. PATHFINDER R5 005 ON Estimated Lift: 0mm SPRING: TO 0 KGS STRUT - SPORT STRUT SPRING: TO 00 KGS STRUT - SPORT STRUT Estimated Lift: 0mm 9000 OME609 SPORT 6006 N8 SPRING: CONSTANT 00 KGS OME60 SPORT 6006 DIESEL & V6 PETROL OME607 N8S OME N8S N8 OE plastic stone shield must be refitted and a Wheel alignment must be carried out after fitment of OME suspension. Page 9 OME NO. INT Nov09

52 NISSAN PATHFINDER R V6 MODELS V6 MODELS Estimated Lift: 5mm SPRING: NO ACCESSORIES SPRING: TO 50 KGS SPRING: 5 TO 00 KGS STRUT FITTING KIT Estimated Lift: 0mm OME9 OME9 OME98 NS + NS SMP68 OME9 N6 N0 + *N6 / N6C: Suit models to /'99. N0: Suit models from /'99 on. Vehicles with ABS will require a SMP68 ABS bracket kit. NS Right hand side x. NS Left hand side x. PATHFINDER TO LATE 995 TORSION BARS STEERING DAMPER SPORT 600 Estimated Lift: 0mm N6F OMESD5 OME90 SPORT * 6006 / 600 *N / N89 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. - It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. Page 50 OME NO. INT Nov09

53 NISSAN TERRANO II R TORSION BARS - SPORT 600 Estimated Lift: 0mm OME90 SPORT PETROL & DIESEL ENGINES *N65 / N6F N0 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. Page 5 OME NO. INT Nov09

54 SPORT 600 SSANGYONG MUSSO, SPORT UTILITY & KORANDO PETROL & DIESEL ENGINES TORSION BARS - N65 Estimated Lift: 0mm SPORT OME97 UNDER DEVELOPMENT N8 SUZUKI GRAND VITARA DOOR 08/ MODELS PETROL V6 (.7) PETROL CYLINDER (.0) DIESEL (.9) Estimated Lift: 0mm SPRING: TO 5 KGS OME6 OME6 STRUT TO BE DEVELOPED TO BE DEVELOPED Estimated Lift: 0mm OME65 TO BE DEVELOPED Springs are compatible with OE struts. GRAND VITARA TO 005 Estimated Lift: 0mm SPRING: TO 5 KGS STRUT SPRING: 6 TO 75 KGS STRUT & 6 CYLINDER ENGINES OME959 N0S OME96 N0S DIESEL ENGINE OME96 N0S OME96 N0S Estimated Lift: 0mm OME96 N05 Coil Packer OMESJR0 can be used to increase ride height. Page 5 OME NO. INT Nov09

55 VITARA WAGON SUZUKI Estimated Lift: 5-0mm SPRING: TO 5 KGS STRUT SPRING: 6 TO 75 KGS STRUT V6 PETROL ENGINE OME950 N0S OME959 N0S Estimated Lift: 0mm SPRING: LIGHT LOAD OME95 N05 OME955 N05 VITARA WAGON Estimated Lift: 0mm SPRING: TO 5 KGS STRUT SPRING: 6 TO 75 KGS STRUT CYLINDER PETROL ENGINE OME960 N0S OME95 N0S Estimated Lift: 0mm SPRING: LIGHT LOAD OME95 N05 OME955 N05 VITARA SWB TO 005 Estimated Lift: 0mm SPRING: TO 5 KGS STRUT CYLINDER PETROL ENGINE OME95 N0S Estimated Lift: 0mm OME95 N Front strut has 0mm longer travel than original equipment. Rear shock has 50mm longer travel than original equipment. Page 5 OME NO. INT Nov09

56 SUZUKI XL7 WAGON Estimated Lift: 5mm SPRING: NO ACCESSORIES STRUT PETROL ENGINE OME956 N7S DIESEL ENGINE OME96 N7S Estimated Lift: 5mm OME968 N5 EQUATOR (US MARKET ONLY) Estimated Lift: 0mm DIESEL & V6 PETROL SPRINGS: TO 0 KGS OME607 STRUT - SPORT 9000 STRUT N8S SPRINGS: TO 80 KGS OME608 STRUT - SPORT 9000 STRUT Estimated Lift: 0mm N8S CS50R SPORT 6007 N85 SPRING BUSH KIT OMESB99 OMESB00 SPRING: CONSTANT 00 KGS CS05R SPORT 6007 SPRING BUSH KIT GREASABLE SHACKLE KIT U BOLTS N85 OMESB95 OMESB96 OMEGS5 OMEU5A OE plastic stone shield must be refitted. CS50R: Use: OMESB99 with OE Shackles. OMESB00 when installing OMEGS5. CS05R: Use: OMESB95 with OE Shackles. OMESB96 when installing OMEGS5. OE U Bolt plate bolt holes may need to be enlarged when fitting OME U Bolts. Page 5 OME NO. INT Nov09

57 STD TRACK : WIDE TRACK : SJ50 - SWB SJ70 - SWB (also fits MG0) SJ5 - LWB SJ7 - LWB (also fits MG0WT) Note: MG0 & MG0WT are Indian built LWB models. SUZUKI SIERRA ALL LEAF SPRING MODELS (SJ) Estimated Lift: 0mm SPRING: TO 5 KGS SPRING: 6 TO 75 KGS SPRING BUSH U BOLTS FITTING KIT TRIM PACKER STEERING DAMPER CS0FA / B OME05 CS0FA / B OME05 OMESB9 OMESB5 Required FK06 TP05 OMESD0.0 LITRE 5 5. LITRE + CS0FA / B 5 + OME05 + CS0FA / B 5 + OME05 OMESB9 OMESB5 Required FK06 TP05 OMESD0 Estimated Lift: 0mm CS08R OME0 N SPRING: CONSTANT 00 KGS CS09R OME0 N OMESB9 SPRING BUSH KIT OMESB5 U BOLTS Required TRIM PACKER TP05 OMESB9 bush kit fits all models except LJ50. OMESB5 bush kit only fits model LJ50. OME0 fits all models except LJ80 and LJ80 II. N fits all LJ80 and LJ80 II models. 88 to '96 00cc Wide Track Models: Front: D/S OMEU6 x, OMEU6B x P/S OMEU60 x Rear: OMEU60 x 8 to '88 00cc STD Track Models: Front: D/S OMEU6 x, OMEU6B x P/S OMEU6 x Rear: OMEU6 x 8 to '87 000cc Models: Front: D/S OMEU6 x, OMEU6B x P/S OMEU60 x Rear: OMEU60 x FK06 kit required for model with OE stabiliser bar. Refer OME Technical & Fitting Manual. 5 IMPORTANT: Sierras used in extreme heavy off road use eg. Station mustering must have CS0FA + B installed. Page 55 OME NO. INT Nov09

58 SUZUKI SANTANA SAMURAI TO 00 SWB & LWB MODELS. LITRE PETROL.9 LITRE DIESEL Estimated Lift:0-0mm SPRING: TO 5 KGS - 0mm CS0FA / B + CS0FA / B + OME0 OME0 SPRING: 6 TO 75 KGS CS0FA / B + CS0FA / B + OME0 OME0 SPRING BUSH U BOLTS OMESB9 OE OMESB9 OE STEERING DAMPER OMESD0 OMESD0 TRIM PACKER TP05 TP05 SWB MODELS LWB MODELS Estimated Lift: 0mm CS08R CS09R OME05 OME05 SPRING: CONSTANT 00KGS CS09R CS09R OME05 OME05 SPRING BUSH KIT OMESB9 OMESB9 U BOLTS OE OE TRIM PACKER TP05 TP05 Fitment of XL Leaf D0XL is recommended for weight in excess of 6kg on diesel model & 75 kg on petrol model. Front: LHS: OMEU60 x, RHS: OMEU6B x Required when fitting CS0FA/B Rear: OMEU60 x Required when fitting CS09R. OMESD0 can be fitted to models which have an OE Steering Damper. Fitment of XL Leaf DXL is recommended for LWB models with constant 00kg rear weight or OE hard top. JIMNY SN CYLINDER PETROL ENGINE DIESEL ENGINE Estimated Lift: 0mm SPRING: TO 5 KGS OME96 OME965 OME08 OME08 SPRING: 6 TO 85 KGS OME965 OME969 OME08 OME08 Estimated Lift: 0mm SPRING: TRIM PACKER OME966 OME967 OME09 OMESJR0 OME966 suits Japanese built models with a 0mm higher right hand side coil. OME967 suits European built models with equal height coils Page 56 OME NO. INT Nov09

59 TOYOTA LANDCRUISER 00 SERIES WAGON Estimated Lift: As Below SPRING: NO WEIGHT: 5mm LIFT STRUT - SPORT STRUT SPRING: 00 KGS: 5mm LIFT STRUT - SPORT STRUT SPRING: N0 WEIGHT: 50mm LIFT STRUT - SPORT STRUT N08S SPRING: 00 KGS: 50mm LIFT OME70 STRUT - SPORT STRUT COIL PACKER Estimated Lift: As Below OME700 N08S OME70 N08S OME70 N08S OME95PF5 : LESS 0mm OME70 SPORT 6009 N09 : NO LIFT SPORT : 0mm LIFT TRIM PACKER 6000 SPORT 6000 SPORT 6009 N09 SPORT 6009 SPRING: CONSTANT 00 KGS: 0mm SPORT SPRING: CONSTANT 00 KGS: 0mm SPRING: CONSTANT 600 KGS: 0mm STONE GUARD KIT OME7 OME N0 OME80PR05 OME80PR0 ALL V8 ENGINES SELECTION HINTS: The OME spring range has been developed to give owners the ability to reduce the very pronounced 75mm of rear to front rake of the original Toyota suspension. By carefully matching the OME front and rear springs the rake can be reduced to be between 0mm and 50mm. NB: Where 0mm lift rear coils are selected they must be matched to 50mm lift front springs. N09 OME7 N0 OME7 N0 OME75 OME66 OME Coils and strut can only be installed together due to different winding of the lower coil end to suit the OME coil seat. They are not compatible with the OE Equipment. Due to the nature of the KDSS, models fitted with KDSS may experience a characteristic 0mm to 5mm lean to the front right hand side. To maintain ride height when front accessory weight exceed 00 KGS, OME95PF5 coil packer should be installed, each OME95PF5 will increase ride height by 0mm. OME66 lower shock stone guards are recommended fitment for protection against stone damage. Page 57 OME NO. INT Nov09

60 TOYOTA LANDCRUISER 00 SERIES INDEPENDENT SUSPENSION TORSION BARS: OVER 75 KGS SPORT *6000 / FITTING KIT Estimated Lift: 0mm PETROL & DIESEL ENGINES *N99 / N / N00 FK7 0/000 ON OME860 SPORT 6000 *N00 / N0 SPRING: CONSTANT 00 KGS OME86 SPORT *6000 / 6000 *N00 / N0 SPRING: CONSTANT 00 KGS OME86 SPORT 6000 N00 OME866 OME86 SPORT 6000 *N00 / N0 TRIM PACKER OME80PR05 OME80PR0 STONE GUARD KIT OME66 Estimated Lift: 0mm SPORT SPRING: CONSTANT 00 KGS SPORT TRIM PACKER STONE GUARD KIT OME866 *6000 / 6000 *N00 / N0 OME80PR05 OME80PR0 OME66 5 0/98 TO 000 V8 MODELS OME *N00 / N0 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock absorbers. 000 suits V8 models. 000 suits Turbo Diesel models. NB: In some Middle Eastern Countries, 6 Cylinder Petrol LandCruiser 00 Series (IFS) use the longer turbo disel torsion bars. 5 Packers must be installed on top of coils. OME66 or OME66 (suits 0mm diameter control arms) lower shock mount stone guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Original rear rake is 60mm approximately with OE coil rates of 5lbs/in or 5.5N/mm. Customers wishing to lower the rear height but increase the load carrying ability can select from: OME866 - Reduces OE height by 0mm (rates 0-00lbs/in, - 5.5N/mm). OME86 - Reduces OE height by 0mm (rates 0lbs/in, N/mm). Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment of a FK7 lower control arm reinforcing bracket kit is strongly recommended. Page 58 OME NO. INT Nov09

61 TOYOTA LANDCRUISER 05 SERIES & 80 SERIES WAGONS LIVE AXLE SUSPENSION MODELS Estimated Lift: 0-50mm SPRING: TO 50 KGS - 50mm OME85 SPORT 6008 *N7 / N70 SPRING: 5 TO 0 KG-50mm OME850 SPORT 6008 N7 SPRING: TO 0KG-0mm LIFT OME86 SPORT 6008 TRIM PACKER STEERING DAMPER CASTER KIT Estimated Lift: 0-50mm SPORT SPRING: CONSTANT 00 KGS SPORT SPRING: CONSTANT 00 KGS SPORT SPRING: CONSTANT 600 KGS SPORT SPRING: MEDIUM 0mm LIFT PETROL & DIESEL ENGINES N7 OME80PF05 OME80PF0 OMESD OMECA77B SPORT 6000 TRIM PACKER STONE GUARD KIT Estimated Lift: 50mm SPORT SPRING: CONSTANT 00 KGS OME *N7E / N7E OME N7E OME N7E OME N7E OME86 *N7E / N7E OME80PR05 OME80PR0 OME66 OME860 OME86 LPG CONVERSION 6000 *N7E / N7E SPORT 6000 TRIM PACKER N7E OME80PR05 OME80PR0 STONE GUARD KIT OME66 For models built from 8/99 add 0mm to lift height shown which is based on average for petrol and diesel engines. OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. Packers must be installed on the top of Coil Springs. OME66 or OME66 Lower shock mount stone guard is recommended fitment to protect against severe stone pepppering encountered on loose road surfaces. OME66 will only fit models with 0mm diameter control arms. Page 59 OME NO. INT Nov09

62 PRADO 0 SERIES /00 ON LWB & SWB EXCEPT TEMS MODELS (ELECTRONICALLY MODULATED SUSPENSION) Estimated Lift: 5mm SPRING: TO 50 KGS STRUT - SPORT STRUT SPRING: 5 TO 00 KGS STRUT - SPORT STRUT SPRING: 0 TO 50 KGS STRUT - SPORT STRUT TRIM PACKER Estimated Lift: 0mm OME95PF5 SPORT 6000 SPRING: 50KGS - 00KGS SPORT Estimated Lift: 0mm PETROL & DIESEL ENGINES OME N0S OME88 *N0S / N0S OME885 N0S OME895E OME895 *N / N OME896 SPORT *60005 / 6000 *N0 / N SPRING: CONSTANT 00 KGS STONE GUARD KIT OME N0 OME66 TOYOTA LWB MODELS SWB MODELS OME895E SPORT 6000 *N / N SPRING: 50KGS - 50KGS OME895 SPORT *60005 / 6000 *N0 / N SPRING: CONSTANT 00 KGS OME896 SPORT N0 STONE GUARD KIT OME66 To maintain front strut droop it is important front coils are selected as shown. OME66 lower shock mount stone guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME895E suits LWB models without OE nd fuel tank. OME895 suits LWB models with OE nd fuel tank. Page 60 OME NO. INT Nov09

63 TOYOTA PRADO 90 SERIES TO 0/00 LWB Estimated Lift: 0mm SPRING: TO 50 KGS STRUT - SPORT STRUT SPRING: 5 TO 0 KGS STRUT - SPORT STRUT TRIM PACKER Estimated Lift: 0mm SPORT N86 / N86C SPRING: CONSTANT 50 KGS OME89 SPORT *6007 / 6008 *N86B / N86 SPRING: CONSTANT 00 KGS OME89 SPORT 6007 *N86B / N86 TRIM PACKER OME80PF05 OME80PF0 STONE GUARD KIT OME66 V6 PETROL ENGINES OME N9S/N9SC OME *N9SB / N9S OME95PF5 OME OME N9S/N9SC OME *N9SB / N9S OME95PF5 DIESEL ENGINES To maintain front strut droop it is important front coils are selected as shown. OME66 lower shock mount stone guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. TUNDRA 007 ON Estimated Lift: 60mm SPRING: NO BAR STRUT SPRING: BAR ONLY STRUT SPRING: BAR & WINCH STRUT Estimated Lift: 60mm XL LEAF SPRING BUSH - BONDED RUBBER U BOLTS FITTING KIT GREASABLE SHACKLE KIT OME6 N9S OME6 N9S OME6 N9S CS055R N9 D8XL SUPPLIED WITH SPRINGS OMEU5B FK OE Models with rear sway bar will require end link modifications to retain sway bar in operation. FK: Brake Line and ABS Wire Bracket Relocation Kit is a mandatory fitment. Page 6 OME NO. INT Nov09

64 TOYOTA FJ CRUISER 006 ON Estimated Lift: 50mm SPRING: NO ACCESSORIES OME88 STRUT - SPORT STRUT N0S SPRING: TO 60 KGS OME88 STRUT - SPORT STRUT N0S SPRING: 60 TO 0 KGS OME885 STRUT - SPORT STRUT N0S TRIM PACKER OME95PF5 Estimated Lift: 50mm SPRING: LIGHT LOAD OME895E SPORT 6000 N OME895 SPORT 6000 N FORTUNER 00 ON Estimated Lift: 0mm SPRING: TO 75 KGS STRUT SPRING: 76 TO 0 KGS STRUT TRIM PACKER Estimated Lift: 0mm SPRING: CONSTANT 00 KGS OME88 *N67S / N66S OME88 N67S OME95PF5 OME80 N9 OME80 N9 Page 6 OME NO. INT Nov09

65 TOYOTA LANDCRUISER 76 SERIES WAGON Estimated Lift: 50mm SPRING: TO 60 KGS SPORT SPRING: 6 TO 0 KGS SPORT STEERING DAMPER CASTER KIT V8 DIESEL ENGINES OME N06 OME N8 OMESD7 OMECA77B Estimated Lift: 50mm SPRING: MEDIUM CS057R SPORT 6000 *N97 / N75E SPRING: CONSTANT 00KGS CS058R SPORT 600 N97 SPRING BUSH KIT OMESB86 OMESB85 GREASABLE SHACKLE KIT OMEGS9 OMEGP7 ANTI-INVERSION KIT FK8 U BOLTS OMEU59D OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if required. Be sure to select OME bush kits carefully: OMESB85: Use for all models when installing OME Greasable Shackles & Pins. OMESB86: Use when original shackles & pins are used. To prevent springs from inverting it is mandatory that either OMEGS9 Greasable Shackle Kit or FK8 Anti-Inversion Kit be installed. Page 6 OME NO. INT Nov09

66 TOYOTA LANDCRUISER 78 & 79 SERIES Estimated Lift: 6 Cylinder Models: 0mm V8 Models: 50mm SPRING: TO 50 KGS N8 OME859 SPORT *N8/N06 *N8/N06 SPRING: 5 TO 0 KGS OME859 OME STEERING DAMPER OMESD OMESD7 OMESD7 CASTER KIT OMECA77B OMECA77B SWAY BAR SPACER KIT FK9 5 FK9 5 Estimated Lift: All Models: 5mm PETROL & DIESEL 6 CYLINDER ENGINE OME856 SPORT TRIM PACKER OME79PF0 79 SERIES SINGLE CAB OMESB8 V8 DIESEL ENGINES N8 OME79PF0 78 SERIES TROOP CARRIER SPRING: CONSTANT 00KGS CS0R CS0R SPORT *N75F / N75E *N75F / N75E SPRING: CONSTANT 00KGS CS0R CS0R SPORT N97 N97 SPRING: CONSTANT 600KGS CS05R CS05R SPORT N97 N97 SPRING BUSH KIT GREASABLE SHACKLE KIT U BOLTS SWAY BAR BRACKET KIT OMESB0 OMESB85 OMEGS0 OMEGP7 OMEU59B NOT REQUIRED OMESB85 OMEGS9 OMEGP7 OMEU59B FK OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK Sway Bar Extension Bracket Kit must be installed to prevent damage to Sway Bar mounts, due to increased suspension travel OMESD suits pre 007 models (open length 65mm). OMESD7 suits 007on models (open length 750mm). OMESB86 There is a difference between the shackles on Single Cab models and Troop Carrier models. Be sure to select OME bush kits carefully: OMESB0: Use on original shackles & pins for 79 Series Models from 07/009 on. OMESB8: Use on original shackles & pins for 79 Series Models to 06/009. OMESB85: Use for all models when installing OME greasable shackles & pins. OMESB86: Use for Troop Carrier models when original shackles & pins are used. 5 Should the front drive shaft contact the sway bar when the suspension is at full droop, use FK9 Spacer Kit to pack the sway bar down. - Page 6 OME NO. INT Nov09

67 TOYOTA LANDCRUISER 75 SERIES PETROL ENGINES DIESEL ENGINES Estimated Lift: 50mm SPRING: TO 50 KGS CS006F CS006F SPORT SPRING: 5 TO 0 KGS CS007F SPORT *N50 / N88 *N50 / N88 U BOLTS OMEU5 OMEU5 SPRING BUSH KIT OMESB OMESB GREASABLE SHACKLE KITS OMEGS OMEGS OMEGP OMEGP STEERING DAMPER OMESD OMESD ANTI INVERSION KIT FK08 FK08 Estimated Lift: 70mm SPORT 6000 SPRING: CONSTANT 00 KGS *N88 / N9 CS006F CS006R *N75F / N75E CS007R SPORT 600 SPRING: CONSTANT 600 KGS SPORT 600 SPRING BUSH KIT U BOLTS N75F CS008R N75F OMESB6 OMEU59B GREASABLE SHACKLE KITS OMEGS OMEGP ANTI INVERSION KIT FK08 There can be spigot sizes in the rear fixed end pins on 75 Series LandCruisers. Check for correct size before ordering greasable pins. Part numbers are: 50mm spigot = OMEGP. 5mm spigot = OMEGP *N88 / N9 Vehicles with no front accessory weight will require the removal of the th leaf from the top of the spring stack. This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 00mm. Shackles: FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted. Note: Spring Caster Wedge OMECW ( o Caster Wedges) may be required to restore positive caster angle. Front end alignment check will indicate required adjustment. Page 65 OME NO. INT Nov09

68 TOYOTA LANDCRUISER HZJ7 & HZJ7 SWB & MWB DIESEL. ENGINES Estimated Lift: 50mm SPRING: TO 50 KGS OME856 SPORT *N06 SPRING: 5 TO 0 KGS OME859 SPORT STEERING DAMPER CASTER KIT Estimated Lift: 60mm SPORT SPRING: CONSTANT 50 KGS SPORT SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KITS N06 OMESD OMECA77B CS07RB 600 N68 CS00RB 600 N75 OMESB9 OMEU59A OMEGS0 OMEGP7 OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. If rear bump stop measurements exceed 50mm remove rd leaf. OME greasable shackles OMEGS0 & OMEGP7 are mandatory fitment. OE shackles cannot be used. LANDCRUISER II WAGON Estimated Lift: 0mm SPRING: TO 50 KGS SPRING: 5 TO 0 KGS Estimated Lift: 0mm SPRING: CONSTANT 00 KGS OME87 N77 OME87 *N77B / N77 OME87 N79 OME875 *N79B / N79 Page 66 OME NO. INT Nov09

69 TOYOTA BUNDERA RJ70 / Estimated Lift: 0mm SPRING: TO 50 KGS SPRING: 5 TO 0 KGS Estimated Lift: 50mm PETROL & DIESEL ENGINES OME870 N OME876 N OME87 N N N fits left hand side. N fits right hand side. LANDCRUISER 70, 7, 7 SERIES SWB & MWB PETROL & DIESEL ENGINES Estimated Lift: 50mm SPRING: TO 50 KGS CS006F SPORT SPRING: 5 TO 0 KGS SPORT SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT Estimated Lift: 75mm SPORT 6006 SPRING: CONSTANT 00 KGS SPORT 6006 N85 SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KITS ANTI INVERSION KIT *N88 / N9 CS006F N88 OMESB OMEU5 OMEGS OMEGP OMESD FK08 CS07RA / B N85 CS00RA / B OMESB OMEU59A OMEGS GSP0 FK Vehicles with no front accessory weight will require the removal of the th leaf from the top of the spring stack. This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 00mm. If bump stop measurement exceeds 50-60mm remove rd leaf from top of spring stack to prevent shock absorber from topping out. Shackles: FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted. Note: Spring Caster Wedge OMECW ( o Caster Wedges) may be required to restore positive caster angle. Front end alignment check will indicate required adjustment. There can be spigot sizes of the rear fixed end pins. Check spigot size before ordering greasable pins. 50mm spigot = OMEGP 5mm spigot = OMEGP Page 67 OME NO. INT Nov09

70 PETROL ENGINES DIESEL ENGINES Estimated Lift: 50mm SPRING: TO 50 KGS SPORT SPRING: 5 TO 0 KGS CS00F CS00F *N88 / N9 *N50 / N88 CS005F SPORT N88 N50 SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT Estimated Lift: 75mm CS00F OMESB OMEU5 OMEGS OMEGP OMESD FK08 TOYOTA LANDCRUISER 60, 6 & 6 SERIES SPRING: RIDE/LIGHT LOAD SPORT CS07RA / B N9 N95 CS00RA /B 5 SPORT *6006 / 600 *60065 / 6006 *N90 / N85 *N / N89 FITTING KIT FK0 FK0 SPRING: CONSTANT 00 KGS CS005RA / B 5 SPORT N90 N FITTING KIT FK08 SPRING BUSH KIT OMESB U BOLTS OMEU59B GREASABLE SHACKLE KITS OMEGS OMEGP ANTI INVERSION KIT FK08 OMESB OMEU5 OMEGS OMEGP OMESD FK Front bump stop measurement must not exceed 00mm to ensure good shackle angle. To reduce bump stop gap, remove the th leaf from the top of the spring. OMECW Caster Wedge Kit may be required to restore correct caster angle. Shackles: FK08 anti inversion kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. Post 986 vehicles have a 9mm mounting pin and suit shock part no's N9, N90, N85, 6006 & Pre 986 vehicles have a 6mm mounting pin and suit shock part no's N95, N, N89, 600 & Fitting Kit is only required on vehicles with rubber insulators around rear springs. Refer OME Technical & Fitting Manual Section 7 GFI: LandCruiser 60 Series page 7 selection chart. Barn door models may require A/A or B/B spring fitment. Page 68 OME NO. INT Nov09

71 TOYOTA LANDCRUISER 5, 7 SERIES ALL LWB MODELS PETROL & DIESEL ENGINES Estimated Lift: 5mm SPRING: TO 50 KGS SPRING: 5 TO 0 KGS SPRING BUSH KIT U BOLTS - 5mm Eye Spring U BOLTS - 5mm Eye Spring GREASABLE SHACKLE KITS CS00F N8 CS00F *N / N8 See Chart Below OMEU59A OMEU59B OMEU59A OMEU55 See Chart Below FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted STEERING DAMPER ANTI INVERSION KIT Estimated Lift: 50mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS TRIM PACKER OMESD FK08 CS00R N CS00R N See Chart Below OMEU59B TP0 Remove rd leaf from CS00R spring stack to reduce spring rate for light duty application. GREASABLE SHACKLE KITS See Chart Below ANTI INVERSION KIT FK08 8mm Shackle Pins & 5mm Hanger Bracket 5mm Shackle Pins & 5mm Hanger Bracket 8mm Shackle Pins & 0mm Hanger Bracket 5mm Shackle Pins & 5mm Hanger Bracket KIT PART NO. GREASABLE SHACKLES. Compatible Bush Kit. OMEGS OMESB OMEGP OMESB OMEGS8 OMESB0 OMEGP8 OMESB0 OMEGS7 OMESB79 *GSP0 OMESB79 OMEGS9 OMESB0 OMEGP8 OMESB0 * GSP0 is only a greasable pin replacement for Original Pin Page 69 OME NO. INT Nov09

72 TOYOTA LANDCRUISER 0, SERIES SWB Estimated Lift: 5mm SPRING: TO 50 KGS SPRING: 5 TO 0 KGS SPRING BUSH KIT U BOLTS - 5mm Eye Spring U BOLTS - 5mm Eye Spring PETROL & DIESEL ENGINES CS00F N8 CS00F N OMESB0 OMESB OMEU59A OMEU59B OMEU59A OMEU55 GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT Estimated Lift: 60mm SPRING: CONSTANT 50 KGS U BOLTS SPRING BUSH KIT GREASABLE SHACKLE KITS See Chart Below OMESD FK08 CS00R *N89 / N95 CS00R N89 OMEU59A OMESB0 OMESB See Chart Below ANTI INVERSION KIT FK08 OMESB0 suits 5mm spring eye and 5mm hanger bracket with 5mm shackle pin hole. OMESB suits 5mm spring eye and hanger bracket with 8mm shackle pin hole. FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted. GREASABLE SHACKLES.. Compatible Bush Kit 8mm Shackle Pin 5mm Shackle Pin OMEGS OMEGS OMEGP OMEGP OMEGS8 OMEGS9 OMEGP8 OMEGP8 OMESB OMESB0 Page 70 OME NO. INT Nov09

73 TOYOTA TACOMA V6 0/00 ON Estimated Lift: 50mm SPRING: TO 50 KGS STRUT SPRING: 5 TO 00 KGS STRUT Estimated Lift: 55mm OME885 N0S OME886 N0S CS07R U BOLT N8 OMEU5A SPRING BUSH KIT USE OE DRIVESHAFT SPACER KIT FK9 TACOMA V6 & CYLINDER Estimated Lift: 5mm SPRING: TO 50 KGS STRUT SPRING: 5 TO 00 KGS STRUT Estimated Lift: 55mm SPRING BUSH KIT GREASABLE SHACKLE KIT EXHAUST BRACKET KIT OME880 N9SC OME88 N9S CS06RA / B N85 OMESB88 OMESB89 OMEGS FK + OMESB88 must be used with OMEGS greasable shackles. OMESB89 must be used with original shackles. FK exhaust bracket is mandatory fitment to ensure exhaust system clears springs. Page 7 OME NO. INT Nov09

74 TOYOTA HILUX/VIGO 005 ON ALL ENGINES Estimated Lift: 0mm SPRING: TO 75 KGS OME88 STRUT - SPORT 9000 STRUT SPRING: 76 TO 0 KGS STRUT - SPORT STRUT TRIM PACKER *N67S / N66S OME N67S OME95PF5 Estimated Lift: 5mm SPRING: LOW LIFT 0mm CS0R-5 SPORT N68 SPRING: LIGHT LOAD CS0R SPORT N68 CS0R SPORT *N69 / N68 SPRING: CONSTANT 00 KGS CS05R SPORT N69 SPRING BUSH KIT OMESB98 U BOLTS OMEU5A GREASABLE SHACKLE KIT OMEGS To maintain coil clearance from the Sway Bar, the coil seat must be installed with the helix facing away from the Sway Bar. Page 7 OME NO. INT Nov09

75 TOYOTA HILUX/TIGER PETROL & DIESEL ENGINES TORSION BARS: OVER 50 KGS 000 SPORT 600 *N87 / N80 STEERING DAMPER OMESD Estimated Lift: 50mm CS08R SPORT N68 + N68E SPRING: CONSTANT 0 KGS CS09R SPORT *N75 + N75E N68 + N68E SPRING: CONSTANT 50 KGS CS00R SPORT N75 + N75E SPRING: CONSTANT 00 KGS CS0R SPORT N75 + N75E SPRING BUSH KIT OMESB GREASABLE SHACKLE KIT OMEGS7 ANTI INVERSION KIT FK5 FITTING KIT FK Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 600, N75E and N68E are longer in length and must be fitted to right hand side only. Fitment to left hand side may cause damage to shock absorber and vehicle. Mandatory Fitment: Either OMEGS7 or FK5 anti inversion kit must be fitted to prevent possible spring inversion. Fitment of FK0 spacer washers to U Bolts is required to ensure correct tension is obtained on U bolts. Page 7 OME NO. INT Nov09

76 TOYOTA HILUX & RUNNER PRE 997 ALL LEAF SPRING MODELS PETROL ENGINES DIESEL ENGINES Estimated Lift: 5mm SPRING: TO 50 KGS CS008FA / B + CS009FA / B + SPORT N8 *N9 / N8 SPRING: 5 TO 0 KGS CS009FA / B + CS009FA / B + SPORT *N9 / N8 N9 SPRING BUSH KIT OMESB5 OMESB5 U BOLT OMEU5 OMEU5 FITTING KIT FK0 FK0 GREASABLE SHACKLE KITS OMEGS OMEGS OMEGP OMEGP STEERING DAMPER OMESD OMESD Estimated Lift: 50mm SPORT SPRING: CONSTANT 50 KGS SPORT U BOLTS SPRING BUSH KIT GREASABLE SHACKLE KITS TRIM PACKER ANTI INVERSION KIT CS009R *6006 / 600 *60065 / 6006 *N85 / N9 *N89 / N95 CS00R N85 N89 OMEU5 OMESB6 OMEGS OMEGP TP0 FK09 FK 7 5 A/A spring fitment may be needed on some vehicles for trimming purposes. Petrol HiLux may require an FK0 (saddle correction plates) if the spring seats are distorted. FK0 must be fitted to all Diesel & Petrol models used off road. Refer OME Technical & Fitting Manual. OMEU5 is required when fitting OME springs to stop the U bolt contacting the drag link. Refer OME Technical & Fitting Manual. A trim packer may be required to trim vehicle. Only to be used on rear springs. Post 98 vehicles have a 9mm mounting pin and suit shock part numbers: N85, N9, 6006 and Pre 98 vehicles have a 6mm mounting pin and suit shock part numbers: N89, N95, 600 and If greasable shackles are not fitted anti inversion kits must be fitted. FK09 fits all pre 98 models. FK fits all 985 models on. To provide correct shackle angle, automatic Runner models require the rd leaf to be removed to reduce spring rate Page 7 OME NO. INT Nov09

77 TOYOTA HILUX PRE 997 EXTRA CAB & DUAL CAB SR5 IFS & LEAF MODELS PETROL & DIESEL ENGINES TORSION BARS: 50 KGS 000 N98 STEERING DAMPER OMESD Estimated Lift: 50mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT CS09R *N85 / N9 CS00R *N85 / N9 OMESB U BOLTS OMEU5B Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Compare original spring stack height to OME spring stack to decide whether OMEU5 or OMEU5B U bolts are required. RUNNER 00 ON Estimated Lift: 5-50mm SPRING: NO BAR STRUT SPRING: TO 75 KGS STRUT TRIM PACKER OME88 STRUT - SPORT N0S OME885 STRUT - SPORT N0S OME95PF5 Estimated Lift: 50mm SPORT 6000 SPRING: CONSTANT 50 KGS SPRING: CONSTANT 00 KGS STONE GUARD KIT OME895 N OME896 SPORT *60005 / 6000 N OME897 SPORT N OME66 OME front coils can only be installed with OME Nitrocharger strut t and coil seats Page 75 OME NO. INT Nov09

78 TOYOTA RUNNER IFS COIL SPRING MODELS STEERING DAMPER Estimated Lift: 0mm SPRING: CONSTANT 50 KGS PETROL & DIESEL ENGINES TORSION BARS: OVER 50 KGS 000 OMESD N7F OME90 N7F Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. N98 OME900 RUNNER IFS LEAF SPRING MODELS TORSION BARS: OVER 50 KGS STEERING DAMPER Estimated Lift: 50mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KITS PETROL & DIESEL ENGINES 000 N98 OMESD CS009R *N85 / N9 CS00R N85 OMESB6 OMEU5B OMEGS OMEGP Install OE caster wedges from OE spring stack onto OME springs. Ensure wedges are fitted as per original position. Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Compare original spring stack height to OME spring stack to decide whether OMEU5 or OMEU5B U bolts are required. Page 76 OME NO. INT Nov09

79 SPECIFICATIONS ADDING AN EXTRA LEAF Part No. Required Centre Bolt OME Part Number To Suit Dakar Spring No. To Suit OME Spring No. DXL DXL DXL DXL D5XL D6XL D7XL D8XL D9XL D0XL DXL DXL DXL DXL D5XL D6XL D7XL D8XL D9XL D0XL DXL DXL DXL DXL D5XL D6XL D7XL D8XL D9XL D0XL DXL DXL DXL D5XL UCB UCB UCB8 UCB8 UCB6 UCB6 UCB5 UCB UCB7 UCB5 UCB5 UCB UCB6 UCB7 UCB UCB5 UCB7 UCB UCB6 UCB7 UCB7 UCB8 UCB9 UCB9 UCB UCB5 UCB9 - UCB7 UCB7 UCB9 UCB0 - - XL A/BXL XL XL 7XL 8XL 9XL 0XL 6XL 6XL A/BXL XL - 9XL 6XL 67XL 9A/BXL NNXL RODXL SA/BXL SAXL JCXL JFXL JRXL 9XL RODXL CS00F & CS00F CSOORA/B & CS005RA/B CS00F &CS00F CS00R & CS00R CS009R & CS00R CS09R & CS00R CS00R CS00R CS06R & CS07R CS0R CS00FA/B CS0R & CS0R CS0R & CS0R & CS05R CS0R & CS0R CS06RA/B CS006F CS008FA/B & CS009FA/B CS00R & CS0R & CS0R CS08R & CS09R CS0FA/B CS08R CS0RA/B & CS05RA/B CS0F CS06R CS006R & CS007R CS0R & CS05R CS08R CS055R CS07R CS06F CS050R CS05R CS09R & CS056R CS057R & CS058R OME0 & OME OMEA/B & OMEA/B OME & OME OME & OME OME7 & OME7 OME8 & OME8 OME9 OME0 OME6 & OME6 OME6 OMEA/B OME & OME - OME9 & OME9 OME6A/B OME67 OME99A/B & OME9A/B OMENN & OMENN OMEROD OMESA/B OMES OMEJCA/B & OMEJCA/B OMEJF OMEJR OME9 & OME9 OMEROD * FK0 U Bolt Thread Spacer Kit required on all Cab Chassis models REMOVING A LEAF: In general terms, to reduce a spring's rate remove the third leaf from the top of the spring. Except if the third leaf is fitted with a spring clip, in this case remove the fourth leaf. Page 77 OME NO. INT Nov09

80 SPECIFICATIONS REPLACEMENT MAIN & SECOND LEAF DAKAR OME SPRING MAIN LEAF SECOND LEAF CS00F, CS00F SPRINGS 0 SERIES - OME, OME SLF/ SLF/ CS00F, CS00F, CS005F 60 SERIES - OME0, OME, OME SLF/ SLF/ CS006F, CS007F 75 SERIES - OME67, OME67 SL6F/ SL6F/ CS008FA HILUX - OME99A SL8FA/ SL8FA/ CS008FB HILUX - OME99B SL8FB/ SL8FB/ CS009FA HILUX - OME9A SL9FA/ SL9FA/ CS009FB HILUX - OME9B SL9FB/ SL9FB/ CS00FA, CS0FA PATROL M60 - OMEA, OMEA SL0FA/ SL0FA/ CS00FB, CS0FB PATROL M60 - OMEB, OMEB SL0FB/ SL0FB/ CS0FA, CS0FA SUZUKI SIERRA - OMESA SLFA/ SLFA/ CS0FB, CS0FB SUZUKI SIERRA - OMESB SLFB/ SLFB/ CS0F JEEP YJ - OMEJF SLF/ SLF/ SPRINGS CS00R, CS00R 0 SERIES - OME, OME SLR/ SLR/ CS00R 5 SERIES - OME0 SLR/ SLR/ CS00RA, CS005RA 60 SERIES - OMEA, OMEA SLRA/ SLRA/ CS00RB, CS005RB 60 SERIES - OMEB, OMEB SLRB/ SLRB/ CS006R, CS007R, CS008R 75 SERIES - OME9, OME9, OME9, OME9 SL6R/ SL6R/ CS009R, CS00R HILUX - OME7, OME7, OME7 SL9R/ SL9R/ CS0R, CS0R PATROL M60 - OME, OME SLR/ SLR/ CS0R, CS0R, CS05R 78/79 SERIES - OME9, OME9, OME9, OME9 SLR/ SLR/ CS06RA PATROL Y60, Y6 CAB CHASSIS - OME6A, OME6A SL6RA/ SL6RA/ CS06RB PATROL Y60, Y6 CAB CHASSIS - OME6B, OME6B SL6RB/ SL6RB/ CS07RA HJ60 - OMEA SL7RA/ SL7RA/ CS07RB HJ60 - OMEB SL7RB/ SL7RB/ CS08R, CS09R, CS00R, CS0R HILUX - OME80, OME8, OME8, OME8 SL8R/ SL8R/ CS0R, CS0R TRITON / PAJERO - OME, OME SLR/ SLR/ CS0R, CS05R ISUZU / RODEO 00 - OMEROD, OMEROD5 SLR/ SLR/ CS06R, CS07R MAZDA / FORD UTE - OME6, OME6 SL6R/ SL6R/ CS08R, CS09R ISUZU / RODEO - OMEROD, OMEROD, OMEROD SL8R/ SL8R/ CS00R, CS0R, CS0R NAVARA D, D - OMENN, OMENN, OMENN SL0R/ SL0R/ CS0RA JEEP XJ - 75mm SLRA/ SLRA/ CS0RB CS0RA, CS05RA JEEP XJ - 75mm JEEP XJ - OMEJCA, OMEJCA SLRB/ SLRA/ SLRB/ SLRA/ CS0RB, CS05RB JEEP XJ - OMEJCB, OMEJCB SLRB/ SLRB/ CS06R, CS07R JEEP YJ - OMEJR, OMEJR SL6R/ SL6R/ CS08R, CS09R SUZUKI SIERRA - OMES, OMES SL8R/ SL8R/ CS00R, CS0R MITSUBISHI CHALLENGER - OME9, OME9 SL0R/ SL0R/ CS0R FORD EXPLORER - OME6 SLR/ SLR/ CS0R, CS0R, CS05R HILUX 005ON SLR/ SLR/ Page 78 OME NO. INT Nov09

81 Centre Bolt Part No. Head Diameter Head Depth Shank Length SPECIFICATIONS REPLACEMENT CENTRE BOLTS Dimension Details Shank Diameter Thread Length Thread A B C D E UCB /8 UNF UCB /8 UNF UCB /8 UNF UCB /8 UNF UCB /8 UNF UCB /6 UNF UCB /6 UNF UCB /6 UNF UCB /6 UNF UCB /8 UNF UCB /8 UNF UCB /6 UNF UCB /8 UNF UCB /8 UNF UCB /6 UNF UCB /6 UNF UCB /8 UNF UCB M0 UCB M0 UCB M0 CS0R, R CS07R Spring Part No. CS00F, 0F, 05F CS0R, 0R, 05R, 06R, 07R CS006,07F,0F,F,R,R,0R,R,R,5R,5R CS009R, 0R, 8R, 9R, 0R, R CS008F, 09F, F, F, 8R, 9R CS00F, 0F, 0R, 0R, R, R, 5R CS0F, 6R, 7R CS008R, 8R CS06R CS08R CS00R, R, R CS0R, R-5, R, 5R, 6R CS0R, 5R CS09R CS0R,R,5R,6R,7R,7R,57R,58R CS05F CS08R, 9R, 50R, 5R, 56R CS08F DAKAR SPRING SERVICE PARTS SPRING EYE SLEEVES BONDED RUBBER BUSHES ID OD LENGTH ID OD LENGTH (MM) (MM) (MM) (MM) (MM) (MM) CBH CBH /70 CBH CBH /7 CBH CBH /89 CBH CBH /89 CBH CBH /89 CBH CBH /89 CBH CBH /89 CBH CBH LEAF LINER KITS CBH DESCRIPTION CBH IL0YE (Round) Inter Leaf Liners x 6 Pieces CBH SLK60 (60mm Wide) Noise - Service Liners x Pieces CBH SLK70 (70mm Wide) Noise - Service Liners x Pieces SPRING CLIPS RIVETS LEAF CLIP CLIP LENGTH SIZE WIDTH WIDTH LENGTH (MM) (MM) (MM) (MM) 8 / / Page 79 OME NO. INT Nov09

82 SPECIFICATIONS U BOLTS OE spring stack height must be compared to OME spring before final U Bolt selection as OE spring stack heights may vary from model to model. A B C D E PART NO. LEG LEG THREAD THREAD THREAD TOP REC. REC. LENGTH CENTRE DIA LENGTH PITCH TYPE TORQUE TORQUE mm mm mm mm Lbs.ft. Nm OMEU SQUARE 9 6 OMEU FLAT 9 6 OMEU SQUARE 9 6 OMEU5A SQUARE 9 6 OMEU5B SQUARE 9 6 OMEU ROUND OMEU SQUARE 9 6 OMEU SQUARE OMEU ROUND OMEU ROUND 9 6 OMEU58B ROUND 9 6 OMEU59A ROUND 9 6 OMEU59B ROUND 9 6 OMEU59C ROUND 9 6 OMEU59D ROUND 9 6 OMEU ROUND 5 6 OMEU ROUND 5 OMEU6B ROUND 5 OMEU ROUND 5 OMEU SQUARE OMEU ROUND 9 6 OMEU ROUND 9 6 OMEU ROUND 9 6 OMEU ROUND 5 97 OMEU ROUND 5 97 OMEU ROUND 9 6 OMEU69A ROUND 9 6 OMEU SQUARE 9 6 OMEU70A SQUARE 9 6 OMEU SQUARE Page 80 OME NO. INT Nov09

83 SPECIFICATIONS SUSPENSION FITTING KITS Part No. Contains Vehicle Position Refer to: FK0 6 Flat Washers 60 Series Front Manual Sec. GFI - Front suspension installation FK0 Saddle Correction Plates HiLux Petrol Front Manual Sec. GFI - Front suspension installation FK0 x Retainer Spacers mm 60 Series Rear Manual Sec. GFI FK08 x Retainer Spacers 8mm 60 Series Rear Manual Sec. GFI FK0 x Retainer Spacers mm 60 Series Rear Manual Sec. GFI - Rear suspension installation FK09 x Retainer Spacers 9mm 60 Series Rear Manual Sec. GFI - Rear suspension installation FK07 x Retainer Spacers 7mm 60 Series Rear Manual Sec. GFI - Rear suspension installation FK06 x Stabiliser Bar Packers mm Suzuki Front Manual Sec. GFI - Front suspension installation FK08 x Anti-Inversion Plates 60,75 Series All 0 & 70 Series GQ, Maverick ute & c/c Front & Rear Manual Sec. 8 Technical - Shackle Modification FK09 x Anti-Inversion Plates All HiLux Rear Manual Sec. 8 Technical - Shackle Modification FK0 x Short Gussett Plates HiLux Front Manual Sec. 8 Technical - HiLux Front Springs x Long Gussett Plates All models FK x Anti-Inversion Side Plates All HiLux Rear Manual Sec. GFI FK x Anti-Inversion Plates Isuzu Tonne P/Up Rear Fitting instructions supplied with kit FK5 x Ani-Inversion Side Plates 997on HiLux Rear Fitting instructions supplied with kit FK6 x 0mm Bump Stop Spacers Wrangler TJ Rear Fitting instructions supplied with kit FK8 x Brackets GU Patrol Rear Fitting instructions supplied with kit x Bolts Sway Bar x Washers FK9 x Nuts x Spacer Plates x 5mm Bolts LandCruiser 78 & 79 Models Front Sway Bar Fitting instructions supplied with kit FK0 x Spring Washers 6 x Spacer Plates 8 x Bolts M8 X.5 X 5mm 8 x Flat Washers Land Rover Discovery 99 on Models Front Cross Member Fitting instructions supplied with kit FK x Bracket x Bolts M8 Toyota Tacoma Rear Exhaust x Flat Washers Bracket x Hex Nuts FK x Shock Tower Support Mazda/Ford Front Fitting instructions x Captive Nuts tonne Pickup x M0 x.5 x 0mm Bolt x Washers Flat x Washers Spring FK x Strut Adaptor Toyota / RAV Front Fitting instructions 998 to 000 FK x Brackets 6 x Bolts Nissan Y6 with Stabiliser Rear Sway Bar Fitting instructions X Washers Flat Bar Release 6 x Nuts Nyloc FK5 x Spacer Blocks Nissan Y6 Front Fitting instructions x Bolts Oil Pan Kit x Washers Flat x Washers Spring FK6 x Side Plates Isuzu / Rodeo 00 on Rear Fitting instructions supplied with kit FK7 x Support Brackets LandCruiser Torsion Bar Fitting instructions supplied with kit 00 Series IFS Locating Bracket Page 8 OME NO. INT Nov09

84 SPECIFICATIONS SUSPENSION FITTING KITS Part No. FK8 FK9 FK0 FK FK FK FK5 FK6 FK7 FK8 FK9 Contains Vehicle Position Refer to: x Spacers Suzuki XL7 Front Fitting instructions supplied with kit x Studs x Spacers Toyota Rear Fitting Instructions x Bolts M0 X.5 X 5MM Tacoma 005 on Drive Shaft x Washers Flat M0 X 5mm x Washers Spring M0 X /8 x Anti-Inversion Bkts Mitsubishi Rear Fitting Instructions x Bracket Ford F50 & F50 Rear Fitting instructions 6 x Bolts 999 to 00 x Nuts x M0 Dual Cab Models x Nuts x M0 Caged. 6 x Washer Spring 0 x Washer Flat X Bracket Tundra 007on Front Fitting instructions x Kit x Bolt M8 x.5 x 0 x Hex Nyloc Nut x Washers Flat x Brackets LandCruiser 78 Series Rear Sway Fitting Instructions Bar Mounts x Spacer Ford F50 & F50 Rear Fitting Instructions x Bolts 999 to 00 x Nuts Xtra Cab x Washers x Brackets Ford F50 Front Fitting instructions supplied with kit 8 x Bolts M8 x.5 x on 8 x Nuts M8 x.5 6 x Washers x Bracket Jeep JK - LHD Rear Fitting instructions supplied with kit x Bump Stop Spacers x Extension Plate x Packers x Bolt M x.5 x Nut M x.5 8 x Washers x Bolt M x.5 x Nuts M x.5 x Bolt M8 x.5 x 0 x Nuts Flanged M8 x.5 x Anti-Inversion Plates LandCruiser Rear Fitting instructions supplied with kit 76 Series x Bracket Jeep JK - RHD Rear Fitting instructions supplied with kit x Bump Stop Spacers x Extension Plate x Packers x Bolt M x.5 x Nut M x.5 8 x Washers x Bolt M x.5 x Nuts M x.5 x Bolt M8 x.5 x 0 x Nuts Flanged M8 x.5 Page 8 OME NO. INT Nov09

85 SPECIFICATIONS SUSPENSION FITTING KITS Part No. FKWTJ0 FKWTJ0 GQGK0 GQGK0 JWGK0 JWGK0 JWGK0 Contains Vehicle Position Refer to: x 5mm Panhard Rod Extended Wrangler Rear Fitting instructions supplied with kit Mounting Bracket TJ x Spacer Washers x Bolts M X.5 X 0MM 6 x Flat Washers x Spring Washers x Nuts M x.5 x Spacer Plates GQ Patrol Gearbox Manual Sec. GFI Patrol gearbox spacer kit 8 x Hex. Bolts Maverick Cross Member 8 x Flat Washers 8 x Spring Washers x Spacer Plates Nissan Y6 Gearbox Fitting instructions 9 x Spacer mm Patrol SWB 8 x Bolts M X.5 X 70MM 7 x Washers Spring 7 x Washers Flat 6 x Bolts M8 X.5 X 0MM x Bolts M8 X.5 X 5MM 6 x Spacer Plates Jeep Gearbox Fitting instructions supplied with kit 6 x Bolt Spacers Wrangler 6 x " Bolts to 00 6 x Spacer Plates Jeep TJ Gearbox Fitting instructions 6 x Bolts 00 Manual 7 x Washers Flat Models 7 x Washers Spring 8 x Spacer Plates Jeep TJ Gearbox Fitting instructions 8 x Bolts 00 Auto 8 x Washers Flat Models 8 x Washers Spring Page 8 OME NO. INT Nov09

86 SPECIFICATIONS LEAF SPRING TRIM PACKERS (Mild Steel 5mm Thick) PART No. WIDTH LENGTH HOLE DIA. APPLICATIONS TP0 70mm 0mm 0.mm TP0 70mm 0mm 8.7mm TP0 60mm 0mm 0.mm TP0 60mm 0mm 8.7mm TP05 50mm 0mm 8.7mm TOYOTA 60, 75, NISSAN GQ / FORD MAVERICK CAB CHASSIS & NISSAN GQ UTE TOYOTA 0,, 5, 7 NISSAN MQ, MITSUBISHI PAJERO, TRITON, L00 TOYOTA HILUX SUZUKI SIERRA, HOLDEN DROVER To be used to correct left to right trim problems. Maximum plates (0mm). Order centre bolt separately. Refer Manual for Instructions. CLIP LINER KITS FOR LEAF SPRINGS Kit Part No. Contents: Clip Liner Size & Quantity To Suit OME CLK 0mm X OME0,,, JF CLKA 0mm X, 90mm X OMEA, A CLKB 0mm X, 80mm X OMEB, B CLK 0mm X OME, CLK 0mm X, 60mm X OME, CLK7 5mm X, 70mm X OME7, 7 CLK8 0mm X, 90mm X OME8, 8, 8 CLK0 0mm X, 80mm X OME0 CLK 5mm X, 0mm X OME, CLK 0mm X, 0mm X OMEA/B CLK 0mm X OMEA/B, A/B, JCA/B CLK9 50mm X, 80mm X OME9, 9, 9, 9 CLK 0mm X OME, CLK57 0mm X, 5mm X OME67, 67 CLK6 5mm X, 95mm X OME6A/B, 6A/B, 6A/B CLK9 5mm X, 0mm X OME9A/B, 99A/B CLKJ 5mm X OMEJR CLKJ 0mm X, 80mm X OMEJCA/B CLKNN 80mm X OMENN, NN, NN CLKROD 0mm X, 70mm X OMEROD, ROD, ROD, ROD5 CLKD 5mm X CLK5D 55mm X, 50mm X CLK6D 5mm X, 95mm X OME6, 6 CLKD 0mm X, 85mm X CLK8D 0mm X, 65mm X CLK0D 60mm X CLKD 5mm X, 5mm X, 85mm X CLK8D 7mm x CLK55D 0mm x, 50mm x CLK57D 5mm x, 0mm x CLK58D 5mm x, 5mm x To Suit Dakar CS00F, F, 5F CS00RA, 5RA CS00RB, 5RB CS00F, F CS00R, R CS009R, 0R, 8R, 9R, 5R, 5R CS08R, 9R, 0R CS00R CS0R, R CS07RA/B CS00FA/B, FA/B, RA/B CS006R, 7R, 8R CS0R, R, 9R, 56R CS006F, 7F CS06RA/B, R, 6RA/B, 7R CS008FA/B, 9FA/B CS06R CS05RA/B CS00R, R, R CS0R, 5R CS0FA/B, F CS0R, R, 5R CS06R, 7R CS0RA/B, 50R, 5R CS08R, 9R CS0OR, R CS0R, R, 5R CS08R CS055R CS057R CS058R INTER-LEAF LINER KIT FOR LEAF SPRINGS IL0YE 6 LINERS PER KIT SLK60 LEAF SLEEVES TO SUIT 60MM WIDTH SLK70 LEAF SLEEVES TO SUIT 70MM WIDTH LEAF SPRING CENTRE BOLT SLEEVES Part No. Length mm OD mm ID mm CBS CBS Application LandCruiser 60 series rear GQ Patrol cab chassis front Page 8 OME NO. INT Nov09

87 DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS Diagram. Diagram. Diagram. Diagram. Diagram 5. Diagram 6. Page 85 OME NO. INT Nov09

88 DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS Diagram 7. Diagram 8. Diagram 9. Diagram 0. Diagram. Diagram. Page 86 OME NO. INT Nov09

89 SUSPENSION BUSH KIT SELECTION VEHICLE YEAR LOC'N DESCRIPTION OME P/NO. REQ. NOTE DAIHATSU F Series All Models 5/9 on F Sway bar - link lower OMESB60 Refer Diagram 7 R Sway bar - link upper OMESB60 " " Feroza All Models 0/88 on F Sway bar - link inner/outer OMESB60 " " Rocky All Models /8 to 9 F Sway bar - link eye OMESB005 " " FORD Courier All Models Maverick SWB & Wagon Models Maverick Single Cab Models Leaf Springs /87 on F Sway bar - link OMESB6 Refer Diagram R Spring bush OMESB8 Refer Diagram 8/87 to 9/9 F Caster Kit OMECA77B Refer Diagram 8 Coil Packer - 5mm Coil Packer - 0mm Control arm - to diff front/centre (std) OMEGQPF05 OMEGQPF0 OMESB0055 " " " " " " Control arm - to chassis OMESB0056 " " Panhard rod OMESB005 " " Sway bar - D mount (5mm) OMESB65 " " Sway bar - link OMESB79 " " R Coil Packer - 5mm OMEGQPR05 Refer Diagram 9 Coil Packer - 0mm OMEGQPR0 " " Control arm - upper OMESB006 " " Control arm - lower OMESB006 " " Panhard rod OMESB005 " " Sway bar - D mount (6mm) OMESB66 " " Sway bar - link OMESB79 " " Suits OME springs only Spring & shackle bush kit OMESB6 Refer Diagram GMH / ISUZU Drover /85 on F Spring bush OMESB9 Refer Diagram R Spring bush OMESB9 Suits OE & OME springs Refer Diagram Jackaroo / Trooper Models 8/85 to 9 UBS 6 & 7 R Spring & shackle bush kit OMESB90 Suits OE & OME springs Refer Diagram Rodeo - Isuzu Pick Up Models All Models V6 Models Only 8 to 87 R Spring bush OMESB80 88 on R Spring bush OMESB80 Suits OE & OME springs Refer Diagram Suits OE & OME springs Refer Diagram LADA NIVA ALL F Coil Packer - 0mm OMELNF0 Page 87 OME NO. INT Nov09

90 SUSPENSION BUSH KIT SELECTION VEHICLE YEAR LOC'N DESCRIPTION OME P/NO. REQ. NOTE LAND ROVER Defender 90, 0 & 0 Models 9 on F Caster kit CALR Suits mm wide control arms Refer Diagram 8 Control arm - to diff OMESB007 " " Control arm - to chassis OMESB0066 " " Panhard rod OMESB0065 " " Sway bar - link OMESB0 " " R A arm - upper OMESB007 Refer Diagram Control arm - to diff OMESB0070 " " Control arm - to chassis (0mm-ID) OMESB0069 " " Sway bar - link OMESB0 " " County 0 Model 8 to 9 F Caster kit CALR Suits 8mm wide control arms Refer Diagram 8 Control arm - to chassis OMESB0066 " " Panhard rod OMESB0065 " " R A arm - upper OMESB007 Refer Diagram Control arm - to diff OMESB0070 " " Control arm - to chassis (0mm-ID) OMESB0069 " " Discovery All Models 89 to 99 F Caster kit CALR Suits mm wide control arms Refer Diagram 8 Control arm - to diff OMESB007 " " Control arm - to chassis OMESB0066 " " Panhard rod OMESB0065 " " Sway bar - link OMESB0 " " R A arm - upper OMESB007 Refer Diagram Control arm - to diff OMESB0070 " " Control arm - to chassis (0mm-ID) OMESB0069 " " Sway bar - link OMESB0 " " Range Rover 7 to 86 F Caster kit CALR Suits 8mm wide control arms Refer Diagram 8 R A arm - upper OMESB007 Refer Diagram Control arm - to diff OMESB0070 " " Control arm - to chassis (0mm-ID) OMESB0069 " " Range Rover 86 to 95 F Caster kit CALR Suits mm wide control arms Refer Diagram 8 Control arm - to diff OMESB007 " " Control arm - to chassis OMESB0066 " " Panhard rod OMESB0065 " " Sway bar - link OMESB0 " " R A arm - upper OMESB007 Refer Diagram Control arm - to diff OMESB0070 " " Control arm - to chassis (0mm-ID) OMESB0069 " " Sway bar - link OMESB0 " " Page 88 OME NO. INT Nov09

91 SUSPENSION BUSH KIT SELECTION VEHICLE MAZDA B500 & B600 B500 & B600 YEAR LOC'N DESCRIPTION OME P/NO. REQ. NOTE /87 to 98 F Sway bar - link OMESB6 Refer Diagram 7 R Spring bush OMESB8 Refer Diagram MITSUBISHI Challenger PA Wagon (Rear Leaf Springs) 98 to 5/00 R Spring bush OMESB8 Refer Diagram Pajero NG NA, NB, NC, ND, NE, NF & NG 9/89 to 5/9 F Sway bar - link inner OMESB6 8 to 5/9 F Sway bar - link inner/outer OMESB60 Suits V6 & intercooled diesel models Refer Diagram Suits cyl petrol & diesel models not intercooled Refer Diagram NH & NJ 5/9 to 0/96 F NG, NH & NJ All Leaf Spring Models 5/9 on R Spring bush OMESB8 Refer Diagram Triton Club Cab Model Only F Sway bar - link inner/outer OMESB60 Refer Diagram R Spring bush OMESB8 Refer Diagram MK Models 0/96 on R Spring & shackle bush kit OMESB8 Refer Diagram NISSAN Navara D All 9/85 to 97 F Sway bar - link OMESB79 Refer Diagram R Spring & shackle bush kit OMESB8 Refer Diagram Navara D All /97 on Sway bar - link upper OMESB79 Refer Diagram Pathfinder All Patrol MQ (Round Head Lights) MQ (Square Head Lights) MQ All Models R Spring & shackle bush kit OMESB8 R Spring & shackle bush kit OMESB9 8/86 to 9 F Sway bar - link OMESB79 Refer Diagram 80 to 8/8 F Spring (front eye) bush kit OMESB8 8/8 to 87 F Spring (front eye) bush kit OMESB 80 to 87 F Spring (rear eye) bush kit OMESB9 Suits models to 8/0 Refer Diagram Suits models 0/0 on Refer Diagram Use with OMESB9/OE springs use OMESB Refer Diagram Use with OMESB9 suits OME springs Refer Diagram Refer Diagram R Spring & shackle bush kit OMESB Suits OE and OME springs Refer Diagram Spring bush OMESB9 Suits OME springs Refer Diagram Page 89 OME NO. INT Nov09

92 SUSPENSION BUSH KIT SELECTION MODEL NISSAN PATROL - Y60, GQ YEAR LOC'N DESCRIPTION OME P/NO. KITS REQ BUSHES IN KITS DIAGRAM # /87 to 97 F Body mount - bumper area OMESB9090 F Body mount - cab front OMESB909 F Body mount - cab centre OMESB909 NOTES Suits Wagon & Hardtops, no kit available for cab Chassis model Suits All Wagon to /9 & All Hardtop models Suits All Wagon & hardtop models PATROL - Y6, GU F Body mount - cab front & centre OMESB909 F Caster kit - Control arm OMECA77B 8 F Control arm - to axle OMESB F Control arm - to chassis OMESB F Spring - eye front/rear & shackle OMESB 6 F Sway bar - D mount 6mm OMESB66 F Sway bar - D mount 5mm OMESB F Panhard rod - bush OMESB005 8 F Sway bar - link OMESB F Coil Packer - 5mm Coil Packer - 0mm OMEGQPF05 OMEGQPF0 R Body mount - cab rear to axle OMESB909 R Body mount - cab rear to axle OMESB909 R Panhard rod - bush OMESB005 8 R Spring - eye front/rear & shackle OMESB6 6 R Sway bar - link OMESB R Sway bar - D mount 6mm OMESB R Control arm - lower OMESB R Control arm - upper OMESB R Coil Packer - 5mm Coil Packer - 0mm OMEGQPF05 OMEGQPR0 0/97 on F Body mount - bumper area OMESB9090 F Body mount - cab front OMESB909 Suits All Wagon & Hardtop models Body mount - cab centre OMESB909 Suits All Wagon & Hardtop models F Body mount - cab front & centre OMESB909 Suits All Cab Chassis models F Caster kit - Control arm - to axle OMECA77B 8 F Control arm - to axle OMESB F Control arm - to chassis OMESB F Panhard rod - bush OMESB005 8 F Sway bar - link OMESB Suits Coil spring models to 00 F Sway bar - mount 5mm OMESB65 8 R Body mount - cab centre to axle OMESB909 Suits All Wagon models Body mount - cab centre to axle OMESB909 Suits All Hardtop models R Panhard rod - bush OMESB005 8 R Sway bar - link OMESB Suits Cab Chassis models with coil susp. R Sway bar - mount 6mm OMESB66 8 R Trailing arm - lower OMESB R Trailing arm - upper OMESB R Coil Packer - 5mm Coil Packer - 0mm OMEGQPR05 OMEGQPR0 Suits Pick Up & Cab Chassis models Suits Leaf Spring models Suits Leaf Spring models Suits All Wagon & Hardtop models Suits Coil spring models Suits All Wagon models Suits All Hardtop models Not suitable before 9/89 Leaf Spring models Suits Cab Chassis models with coil susp. Suits Cab Chassis models with coil susp. Suits Wagon & Hardtop, no kit available for Cab chassis model Suits Pick Up with coil susp. Page 90 OME NO. INT Nov09

93 SUSPENSION BUSH KIT SELECTION MODEL YEAR LOC'N DESCRIPTION OME P/NO. KITS REQ BUSHES IN KITS DIAGRAM # NOTES SUZUKI Jimny SN R Coil Packer - 0mm OMESJR0 LJ50 7 to 6/78 F Spring Bush OMESB5 Suits OE & OME Springs 7 to 6/78 R Spring Bush OMESB5 Suits OE & OME Springs LJ80 7/78 to /8 F Spring Bush OMESB9 Suits OE & OME Springs R Spring Bush OMESB9 Suits OE & OME Springs Sierra SJ0 & SJ 7/8 to 95 F Spring Bush OMESB9 Suits OE & OME Springs R Spring Bush OMESB9 Suits OE & OME Springs TOYOTA Runner Leaf Spring Front & Rear Runner (Surf) LN60, YN60 7/8 to 0/85 F Spring - bush kit OMESB5 6 Suits OE & OME Springs R Spring - bush kit OMESB6 6 Suits OE & OME Springs Runner IFS Front Leaf Spring Rear Runner (Surf) LN6, YN6 /85 to 9/89 R Spring - bush kit OMESB6 6 Suits OE & OME Springs HiLux IFS Front & Coil Spring Rear Runner (Surf) LN0, RN0, VZN0, YN0 0/89 to 6/96 F Sway bar - link OMESB60 F Sway bar - mount 5mm OMESB009 R Sway bar - link OMESB Suits LN0, RN0 models R Sway bar - link OMESB00 7 Suits VZN0, YN0 models HiLux WD Leaf Spring Front & Rear HiLux (Surf) LN6, 6 RN6, 6 /79 to 0/8 F Spring - bush kit OMESB5 6 Suits OE & OME springs F Sway bar - link OMESB95 8 R Spring - bush kit OMESB6 6 Suits OE & OME springs HiLux (Surf) LN65, YN 65, 67 /8 to 9/88 F Spring - bush kit OMESB5 6 Suits OE & OME Springs R Spring - bush kit OMESB6 6 Suits OE & OME Springs HiLux (Surf) RN05, LN06 HiLux WD IFS Front & Leaf Spring Rear HiLux (Surf) LN07,, RN06, 0, LN67, 7, RZN69, 7 KZN65 0/88 to /97 F Spring - bush kit OMESB5 6 F Sway bar - mount 5mm OMESB009 R Spring - spring bush OMESB6 6 0/88 to /97 F Sway bar - mount 5mm OMESB009 R Spring - bush kit OMESB 6 /97 on F Sway bar - link OMESB95 8 F Sway bar - mount 5mm OMESB009 R Spring - bush kit OMESB 6 /99 on F Sway bar - link OMESB00 F Sway bar - mount 5mm OMESB009 R Spring - bush kit OMESB 6 Suits OE & OME Springs Suits OE & OME Springs Suits OME Springs only Suits OME Springs only Suits OME Springs only Page 9 OME NO. INT Nov09

94 SUSPENSION BUSH KIT SELECTION MODEL YEAR LOC'N DESCRIPTION OME P/NO. KITS REQ BUSHES IN KITS DIAGRAM # NOTES TOYOTA (continued) LandCruiser 0 Series BJ0,, FJ0, 5,,JH5, 7 LandCruiser 50 Series FJ55 LandCruiser 60 Series FJ60, 6, HJ60, to /8 F Spring - bush kit-to suit 5mm ID OMESB0 6 F Spring - bush kit-to suit 5mm ID OMESB 6 F Spring - bush kit-to suit 8mm ID OMESB 6 R Spring - bush kit-to suit 5mm ID OMESB 6 R Spring - bush kit-to suit 5mm ID OMESB0 6 R Spring - bush kit-to suit 8mm ID OMESB79 6 R Spring - bush kit-to suit 8mm ID OMESB 6 R Sway bar - link OMESB0 /7 to /80 F Spring - bush kit OMESB7 6 R Spring - bush kit OMESB7 6 R Sway bar - link OMESB0 /80 to 8/87 F Spring - bush kit OMESB 6 F Sway bar - link OMESB95 8 R Spring - bush kit OMESB 6 R Sway bar - link upper & lower OMESB0 R Sway bar - mount mm OMESB7 Suits 5mm spring eye Suits 5mm spring eye Suits 5mm spring eye Suits 5mm spring eye Suits 5mm spring eye Suits 5mm spring eye & 0mm hanger bracket Suits 5mm spring eye Suits model /79 - on Suits models /79 - on Suits OE & OME Springs FJ6, HJ60, 6 8/87 to /9 F Spring - bush kit OMESB 6 Suits OE & OME Springs F Sway bar - link OMESB95 8 F Sway bar - mount mm OMESB7 Suits models to /90 R Spring - bush kit OMESB 6 Suits OE & OME Springs R Sway bar - link upper & lower OMESB0 R Sway bar - mount mm OMESB7 LandCruiser 70 Series Bundera (Prado NZ) LJ70, RJ70 /85 to /9 F Panhard rod - bush OMESB8 0 Suits models to 8/87 F Sway bar - link OMESB6 8 0 F Sway bar - mount mm OMESB7 0 Suits models 8/87 - /90 F Sway bar - mount 5mm OMESB009 0 F Control arm - lower rear OMESB8 0 R Panhard rod - bush OMESB8 8 Suits models 7/87 - /90 R Control arm - lower front OMESB8 8 BJ70, 7, 7 /85 to /90 F Spring - bush kit OMESB 6 Suit OE & OME Springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB7 Suits models to 5/86 F Sway bar - mount mm OMESB006 Suits models 6/86 on R Spring - bush kit OMESB 6 Suits OE & OME Springs HJ75 /85 to /90 F Spring - bush kit OMESB 6 Suits OE & OME Springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB7 Suits models to 5/86 F Sway bar - mount mm OMESB006 Suits models 6/86 on R Spring - bush kit OMESB6 6 Page 9 OME NO. INT Nov09

95 SUSPENSION BUSH KIT SELECTION MODEL YEAR LOC'N DESCRIPTION OME P/NO. KITS REQ BUSHES IN KITS DIAGRAM # NOTES TOYOTA (continued) LandCruiser 70 Series FJ70, 7, 75 /85 to 0/9 F Spring - bush kit OMESB 6 Suits OE & OME Springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB7 Suits models to 5/86 F Sway bar - mount mm OMESB006 Suits models 6/86 on F Sway bar - mount 5mm OMESB009 Suits FJ75 models to 8/9 R Spring - bush kit OMESB6 6 Suits FJ70, 7 models R Spring - bush kit OMESB 6 R Sway bar - mount 5mm OMESB0095 Suits Bracket height =8mm FZJ70, 75, HZJ70, 7, 75 /88 to /99 F Spring - bush kit OMESB 6 Suits OE & OME Springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB006 Suits HZJ75 models to /9 F Sway bar - mount 5mm OMESB009 Suits HZJ75 models to /9 F Sway bar - mount 5mm OMESB0095 Suits /9 on Bracket height = 8mm R Spring - bush kit OMESB6 6 Suits FJ75 models R Spring - bush kit OMESB 6 Suits HZJ70 & 7 models R Sway bar - mount 5mm OMESB0095 Suits /9 on Bracket height = 8mm PZJ70, 7 /90 to /9 F Spring - bush kit OMESB 6 Suits OE & OME Springs F Sway bar - link OMESB6 8 R Spring - bush kit OMESB 6 Suits OE & OME Springs FZJ78, 79, HDJ78, 79, HZJ78, 79 8/99 on F Caster kit OMECA77B 0 F Control arm - to chassis OMESB F Sway bar - link outer OMESB 0 F Sway bar - mount mm OMESB 0 F Panhard rod - bush OMESB006 0 R Sway bar - link inner OMESB00 8 R Sway bar - link outer lower OMESB005 R Sway bar - link outer upper OMESB00 Sway bar - mount 5mm OMESB0095 Spring - bush kit OMESB86 6 Spring - bush kit OMESB8 6 Spring - bush kit OMESB85 6 Caster align offset degree Contains new bolts, nuts & crush tubes Suits Bracket height = 8mm Suits FZJ / HDJ / HZJ78 models with OME Springs Suits FZJ / HDJ / HZJ79 models with OME Springs Suits all models with OME springs & greasable shackles Page 9 OME NO. INT Nov09

96 SUSPENSION BUSH KIT SELECTION MODEL YEAR LOC'N DESCRIPTION OME P/NO. KITS REQ BUSHES IN KITS DIAGRAM # NOTES TOYOTA (continued) LandCruiser 80 Series FJ80, FZJ80, HDJ80,,HZJ80 /90 to /98 F Caster kit OMECA77B 0 Caster align offset degree F Control arm - to chassis only OMESB F Panhard rod - bush OMESB006 0 F Control arm - complete kit OMESB F Sway bar - link upper OMESB005 0 F Sway bar - link lower OMESB00 0 F Sway bar - mount mm OMESB006 0 Suits Bracket height = 5mm F Sway bar - mount 6mm OMESB009 0 Suits Bracket height = 5mm F Sway bar - mount 6mm OMESB009 0 Suits Bracket height = 8mm F Sway bar - mount 9mm OMESB009 0 Suits Bracket height = 8mm F Coil Packer - 5mm OME80PF05 0 F Coil Packer - 0mm OME80PF0 0 R Panhard rod - bush OMESB005 8 R Sway bar - link lower OMESB005 8 R Sway bar - link upper OMESB00 8 R Sway bar - mount 5mm OMESB009 8 Suits Bracket height = 5mm R Sway bar - mount 5mm OMESB Suits large Bracket height =8mm R Control arm - lower OMESB R Control arm - upper OMESB LandCruiser 00 Series FZJ05, HZJ05 Solid Axle /98 on F Caster kit OMECA77B 0 Caster align offset degree F Control arm - complete kit OMESB STD replacement F Control arm - to chassis only OMESB F Panhard rod - bush OMESB006 0 F Sway bar - link lower OMESB00 0 F Coil Packer - 5mm OME80PF05 F Coil Packer - 0mm OME80PF0 F Sway bar - mount 9mm OMESB009 0 Suits large bracket (Bracket height = 8mm) R Sway bar - link upper OMESB00 8 R Sway bar - link lower OMESB005 8 R Panhard rod - bush OMESB005 9 R Sway bar - mount 5mm OMESB Suits Bracket height = 8mm R Control arm - lower OMESB R Control arm - upper OMESB R Coil Packer - 5mm OME80PR05 R Coil Packer - 0mm OME80PR0 LandCruiser Lexus HDJ00, UZJ00 (Lexus) IFS /98 on F Sway bar - link upper OMESB6 7 R Sway bar - link OMESB Tacoma To 00 R Spring bush OMESB88 R Spring bush OMESB89 Suits OME Springs only Suits original shackles only Page 9 OME NO. INT Nov09

97 SPECIFICATIONS SPORT Part Number Open Closed Replacement Replacement Dirt Shield Nitrocharger Length Length Type Upper Mount Type Lower Mount Part Number Sport (mm) (mm) Bush Kit Bush Kit P0 N/A E050-BS P0 SMP9 E050-BS P0 SMP9 E005 OMEB P0 SMP9 E005 OMEB P8 N/A E005 OMEB P8 SMP569 E005 OMEB E005 SMP69 E005 SMP E005 SMP69 E005 SMP P8 OMEB P8 OMEB P69 OMEB E005 OMEB E005 OMEB5 E005 OMEB E005 OMEB5 E005 OMEB P8 OMEB P8 OMEB P8 OMEB P8 OMEB E005 OMEB6 E005 OMEB E005 OMEB6 E005 OMEB E05-S N/A E05-S N/A E00 OMEB E06-S N/A P8 OMEB P8 OMEB P58 N/A E00-BS N/A P8 OMEB E005 OMEB P69 OMEB E06-S OMEB0 OME P05 OMEB E050 TBA OME E005 OMEB5 E005BS E005-S N/A E005-T N/A E005-S N/A E005-BS E005-S N/A E005-BS P69 OMEB E005 OMEB P69 OMEB E005 OMEB P0 N/A E005 OMEB P0 N/A E005 OMEB P OMEB E06-S OMEB0 OME E00 OMEB E00 OMEB P58 N/A E05-BS N/A P05 OMEB E06-S OMEB0 OME E00 OMEB E00 OMEB E00 OMEB E00 OMEB P8 OMEB P8 OMEB E005 OMEB6 P8 SMP E005 OMEB6 P8 SMP P69 OMEB E06-S OMEB0 OME E00 OMEB E00 OMEB P69 OMEB E005-S OMEB7 OME E005 OMEB5 E005 OMEB E005 OMEB5 E005 OMEB P69 N/A E06-TB N/A P69 N/A E06-TB N/A E06-TB N/A E06-S N/A Steel Dirt Shield E06-TB N/A E06-S N/A Steel Dirt Shield E00 OMEB E00 OMEB P69 OMEB E06-T OME Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. The last numbers of the Dirt Shield Part Number indicates the length of the dirt shield. See page 0 for legend of mount types Page 95 OME NO. INT Nov09

98 SPECIFICATIONS SPORT Part Number Nitrocharger Sport 6005 Open Length (mm) 565 Closed Length (mm) Type P69 Replacement Upper Mount Bush Kit N/A Type E06-T Replacement Lower Mount Bush Kit E06-T E06-S OMEB E00 OMEB E005-S OMEB E00 OMEB E00 OMEB E00 OMEB E00 OMEB P69 OMEB E06-S OMEB E005 OMEB5 E005 OMEB P69 OMEB E005 OMEB E005 OMEB5 E005 OMEB E005 OMEB5 E005 OMEB P8 OMEB E N/A E-TB N/A E N/A P SMP67 E050-S P SMP66 E050-S P N/A E06-BS N/A P N/A E050-B P SMP67 E066 N/A N/A N/A E055BS N/A P N/A E055BS P N/A E055BS N/A - Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. The last numbers of the Dirt Shield Part Number indicates the length of the dirt shield. See page 0 for legend of mount types Dirt Shield Part Number Steel Dirt Shield Steel Dirt Shield Loose Dirt Shield Loose Dirt Shield - Loose Dirt Shield Loose Dirt Shield - - Page 96 OME NO. INT Nov09

99 SPECIFICATIONS S Part Number Nitrocharger Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement N5/N5C 57 7 E005-S N/A E OMEB6 N P8 SMP7 OMEB E078-T SMP N7 6 8 E06-T SMP E06-S N/A N8 0 5 P69 SMP7 OMEB E06-S OMEB0 N9/N9C 9 9 P8 SMP5 OMEB P8 SMP5 OMEB N 9 9 P8 SMP5 OMEB P8 SMP5 OMEB NF E005 SMP6 OMEB6 E005 SMP6 OMEB0 NF 9 9 P8 SMP5 OMEB P8 SMP5 OMEB N E005 SMP57 OMEB6 P69 SMP7 OMEB N6F 8 5 P69 SMP7 OMEB E06-S N/A OMEB0 N E OMEB6 P8 **SMP SMP N P69 SMP7 OMEB E005 SMP OMEB6 N9/N9C E005 SMP6 OMEB6 E005 SMP6 OMEB0 N E OMEB E OMEB N0E E00 * OMEB E OMEB NS 50 8 N/A N/A N/A N/A N/A N/A N P69 SMP7 OMEB E06-S N/A OMEB0 N P69 SMP76 OMEB E06-S OMEB0 N E OMEB E06-S OMEB0 N5/N5C P69 SMP76 N/A E06-T N6/N6C 56 E06-T E06-S OMEB0 N E00-S N/A E00-S N/A N8S 7 9 P N/A N/A EB E-B N/A N/A N9/N9C 56 P69 SMP76 SMP76 E06-T N0/N0C E N/A E06-S OMEB0 N E OMEB E OMEB N E OMEB E OMEB N P69 SMP7 OMEB E OMEB N E OMEB6 P8 **SMP SMP N5F 55 P8 SMP OMEB P8 SMP OMEB N E OMEB6 P8 **SMP SMP N P69 SMP7 OMEB P69 SMP7 OMEB N E OMEB P69 SMP7 OMEB N9 6 7 P69 SMP7 OMEB P69 SMP7 OMEB N P69 SMP7 OMEB E OMEB6 N P69 SMP7 OMEB E06-BS N5/N5F 5 65 P6 SMP OMEB E06-S 0-A-07 OMEB0 N5/N5C E00-B N/A E06-S N E00 * OMEB E OMEB N P6 SMP OMEB E06-S 0-A-07 OMEB0 N E00 *SMP56 OMEB E00 SMP56 OMEB N57G 0 5 P69 SMP7 OMEB E06-S N/A OMEB0 N P69 SMP7 OMEB E06-S N/A OMEB0 N E00 *SMP56 OMEB E00 SMP56 OMEB N60G 0 5 P69 SMP7 OMEB E06-T N6/N6C E005-S SMP6 OMEB7 E06-S OMEB0 N6G E OMEB E005-S OMEB7 N6G P69 SMP7 OMEB E005-S OMEB7 N6/N6C P69 SMP7 OMEB E005-S OMEB7 N P69 SMP7 OMEB E06-S OMEB0 N66/N66C P69 SMP76 N/A E06-TB N/A N E06-TB N/A E06-S OMEB0 N E OMEB5 E OMEB5 Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. *Spacer Kit SMP5 also supplied. ** Units with build date between 6/007-05/008 use SMP7 See page 0 for legend of mount types Type LOWER MOUNT BUSH KIT Original Kit Bushes only Replacement Page 97 OME NO. INT Nov09

100 SPECIFICATIONS S Part Number Nitrocharger Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement N68E E OMEB5 E OMEB5 N E OMEB6 P8 SMP OMEB N P8 SMP0 OMEB P8 SMP0 OMEB N7E P8 SMP0 OMEB E OMEB6 N7F 58 9 P69 SMP7 OMEB E OMEB6 N7 6 5 P8 SMP50 OMEB P8 SMP50 OMEB N7E P8 SMP50 OMEB E OMEB6 N E OMEB5 E OMEB5 N75E/N75F E OMEB5 E OMEB5 N E OMEB5 E OMEB5 N E0-S N/A P69 SMP7 OMEB N E OMEB5 E OMEB5 N E OMEB6 P69 SMP7 OMEB N80 5 P69 SMP7 OMEB E005-S OMEB7 N E OMEB E OMEB N8 5 5 P69 SMP7 OMEB E06-S SMP8 OMEB0 N P69 SMP7 OMEB E06-S N/A OMEB0 N E OMEB5 E OMEB5 N86/N86C 59 9 P69 SMP7 OMEB E OMEB5 N87 5 P69 SMP7 OMEB E005-S OMEB7 N P69 SMP7 OMEB E OMEB6 N E00 ** OMEB E OMEB N E OMEB5 E OMEB5 N9S 70 5 P- SMP5 N/A E050-B N9SC 70 5 P- SMP5 N/A E050-B N P69 SMP7 OMEB E OMEB6 N P69 SMP7 OMEB E06-S N/A OMEB0 N E OMEB5 E OMEB5 N E00 ** OMEB E OMEB N96 6 P69 SMP7 OMEB P69 SMP7 OMEB N E OMEB P69 SMP7 OMEB N P69 SMP7 OMEB E005-S OMEB7 N P0 SMP9 N/A E050-BS N0/N0C P0 SMP9 SMP9 E OMEB0 N0 8 0 P69 SMP7 OMEB E050-BS N/A N0S 50 8 P- N/A N/A N/A N/A N/A N0/N0C 6 9 E00-S N/A E055-S N/A N P69 SMP7 OMEB E06-S OMEB0 N06/N06C 57 7 P8 SMP50 OMEB P8 SMP50 OMEB N07/N07C E005-S N/A E005-T N/A N08/N08C 59 6 E005-S N/A E005-BS N09S 7 7 N/A Use OE Bushes N/A E055BS N/A N P58 SMP6 N/A E00-BS N/A N 58 8 P70 SMP N/A E06-S SMP87 N/A N 9 79 P69 SMP7 OMEB E OMEB5 N 57 7 E OMEB5 E OMEB5 N P8 SMP5 OMEB P8 SMP5 OMEB N5 55 P8 SMP OMEB P8 SMP OMEB N E OMEB E005-S OMEB7 N E057-S N/A E00-S OMEB0 N8 5 P69 SMP7 OMEB E OMEB N9S N/A SMP8 SMP8 N/A N/A N/A NC N/A N/A N/A N/A Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. *Spacer Kit SMP5 also supplied. ** Spacer Kit SMP95 supplied See page 0 for legend of mount types Type LOWER MOUNT BUSH KIT Original Kit Bushes only Replacement Page 98 OME NO. INT Nov09

101 SPECIFICATIONS S Part Number Nitrocharger Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement NS N/A SMP8 SMP8 N/A N/A N/A NC N/A N/A N/A N/A NS N/A SMP8 SMP8 N/A N/A N/A NS N/A SMP8 SMP8 N/A N/A N/A N5S 89 P SMP6 SMP6 N/A N/A N/A N6S 89 P SMP6 SMP6 N/A N/A N/A N7S P SMP5 SMP5 E-BS N/A N/A N P05 SMP7 OMEB E06-T SMP89 N/A N9S 7 7 P Use OE Bushes N/A E055-BS NS0 0 P SMP97 SMP97 N/A N/A N/A NS 0 P SMP97 SMP97 N/A N/A N/A N E057-S N/A E005-S N/A N 87 P0 SMP9 SMP9 E050-BS N E057-S N/A E005-S N/A N5S/N6S 60 9 P SMP8 SMP8 N/A N/A N/A NC P SMP56 N/A NC P SMP56 N/A N9S 5 05 P SMP6/66 N/A E050-S N0S 5 05 P SMP6/66 N/A E050-S N P8 SMP569 N/A E005 SMP6 OMEB0 N P8 SMP569 N/A E005 SMP6 OMEB0 NS P - N/A - - N/A NS P - N/A - - N/A NC P SMP65 N/A - - N/A N P SMP6 N/A E055-BS N/A N7S 76 6 P SMP60 N/A E050-S N8S 76 6 P SMP60 N/A E050-S N9 50 E05-BS N/A E05-BS N/A N50 88 P05 SMP7 OMEB E06-S OMEB0 N P05 SMP7 OMEB E06-S OMEB0 N P58 SMP6 N/A E05-BS N/A N5 58 P05 SMP7 OMEB E06-S OMEB0 N E OMEB E OMEB N P05 SMP7 OMEB E OMEB N56S Nut only OEM N/A OEM OEM N57S Nut only OEM N/A OEM OEM N58S Nut only OEM N/A OEM OEM N59S Nut only OEM N/A OEM OEM NC P SMP56 SMP56 N/A N/A N/A NC P SMP65 & 6 SMP65 & 6 N/A N/A N/A N6 8 P05 SMP7 OMEB E06-S OMEB0 NC P SMP65 & 6 SMP65 & 6 N/A N/A N/A N P8 SMP50 OMEB P8 SMP50 OMEB N E OMEB5 E OMEB5 N66S 5 P SMP6 & 66 SMP6 & 66 E050-S N67S 5 P SMP6 & 66 SMP6 & 66 E050-S N E005 SMP69 SMP69 E005 SMP69 SMP69 N E005 SMP69 SMP69 E005 SMP69 SMP69 N70 8 P05 SMP7 OMEB E06-S OMEB0 N7 5 6 P05 SMP7 OMEB E005 SMP650 OMEB5 N7 5 6 P05 SMP7 OMEB E005 SMP650 OMEB5 N7S 8 0 P N/A N/A N/A N/A N7 597 P80 SMP SMP P80 SMP SMP N E OMEB6 P80 SMP SMP Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. See page 0 for legend of mount types Type LOWER MOUNT BUSH KIT Original Kit Bushes only Replacement Page 99 OME NO. INT Nov09

102 SPECIFICATIONS S Part Number Nitrocharger Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement N E055-S N/A P80 SMP SMP N E055-S N/A P80 SMP SMP N E E005-S 0-A- N/A N E E005-S 00-A- N/A N E E005-S 0-A- N/A N P8 SMP50 OMEB P8 SMP50 OMEB N P05 SMP7 OMEB E06-S N/A N8S 90 8 P- SMP6 N/A E06-BS N/A N E05-S N/A E05-S N/A N E OMEB E06-S N/A N86S 6 98 P- N/A N/A E055-BS N/A N P05 SMP75 OMEB E050 TBA TBA N88S N E OMEB5 E005BS N E057-S N/A E005-S N P05 SMP7 OMEB E005-S OMEB5 N9S 589 P- SMP659 SMP659 E055-BS N P0 SMP9 E00-BS N/A N P05 SMP75 OMEB E050 TBA TBA N P0 SMP9 - E05-S N P8 SMP7 OMEB E-TBA TBA TBA N E OMEB5 E OMEB5 N E-TBA TBA TBA E-TBA TBA TBA N P0 SMP9 SMP9 E050-BS N P0 SMP9 SMP9 E OMEB0 N0S 5 05 P- SMP6/66 SMP6/66 E050-S N P8 SMP569 SMP569 E005 SMP6 OMEB0 N0S 7 7 P Use OE Bushes N/A E055-BS N P58 SMP6 N/A E05-BS N/A N P SMP665 N/A E05-BS N/A N06S P- Nut only N/A N/A N/A N/A N07S P- Nut only N/A N/A N/A N/A N08S 608 P TBA TBA E066 N/A N/A N P0 SMP9 N/A E OMEB0 N P0 SMP9 N/A E OMEB0 N P8 SMP7 OMEB E N E N/A E OME E N/A E N/A OME0 7 9 E OMEB E OMEB OME E OMEB E OMEB OME P75 SMP OMEB E OMEB OME E N/A E N/A OME E OMEB E OMEB OME P75 SMP OMEB E OMEB OME P75 SMP OMEB E OMEB OME P69 SMP7 OMEB E08-S N/A OME09 50 E08-S N/A E08-S N/A OME E08-S N/A E08-S N/A OME P75 SMP OMEB E OMEB OME P75 SMP OMEB E OMEB OME P- SMP66 OMEB E005-S OMEB7 OME0 8 8 P75 SMP OMEB E OMEB OME E OMEB E OMEB Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. See page 0 for legend of mount types Type LOWER MOUNT BUSH KIT Original Kit Bushes only Replacement Page 00 OME NO. INT Nov09

103 SPECIFICATIONS SHOCK ABSORBER MOUNT TYPES Mount Type Dimensions (mm) OME Replacement Pin Part No. Thread Length X Dia Part No. P6 6 x M0 x.5 OMEB P69 5 x M0 x.5 OMEB P70 7 x M0 x.5 OMEB P75 58 x M0 x.5 OMEB P8 7 x M x.5 OMEB P0 85 x M x.5 Use original P0 77 x M x.5 Use original P05 5 x M0 x.5 OMEB Mount Type Dimensions (mm) Mounting Kit Eye Part No. OD x ID x L Replacement Part No. E00 7 x 5. x. OMEB E00.6 x 7.7 x 9.5 Not available E005. x.7 x 0 OMEB6 *OMEB0 E06 7 x 7 x 5 OMEB0 E08 8. x 5. x Not available E0 6.7 x 6.6 x Not available E00 6 x 7 x 0 Not available E050 5 x 9 x 5 Not available E x 0. x Not available E057 x.5 x 9 Not available T-CROSS PIN MOUNTING S-BUSH WITH SLEEVE B-BONDED BUSH *Special Bush for NF, N9/N9C Lower Rear Mount TORSION BARS SPECIFICATIONS A B C C D D Part Number ±.0 ± Spline No Spline No side hex side hex All dimensions in millimetres (mm) Page 0 OME NO. INT Nov09

104 SPECIFICATIONS LEAF SPRINGS Stack No. of Eye Dia. mm Weight Primary Spring Rate Dakar Part No. OME Part No. Height Leaves Front Rear (kg) Free lbf/in N/mm (mm) Camber mm CS00F OME CS00R OME / / 79 CS00F OME CS00R OME / / 87 CS00F OME CS00R OME / / 5 CS00F OME CS00RA OMEA / / 00 CS00RB OMEB / / 00 CS005F OME CS005RA OMEA / / 08 CS005RB OMEB / / 08 CS006F OME CS006R OME / / 07 CS007F OME CS007R OME / / 05 CS008FA OME99A CS008FB OME99B CS008R OME / / 5 CS009FA OME9A CS009FB OME9B CS009R OME / / 68.0 CS00FA OMEA CS00FB OMEB CS00R OME / / 78.0 CS0FA OMEA CS0FB OMEB CS0R OME CS0FA OMESA CS0FB OMESB CS0R OME CS0FA N/A CS0FB N/A CS0R OME / 58 5 / 96 CS0F OMEJF CS0R +OME / 58 5 / 96 CS05F N/A CS05R +OME / / 9 CS06RA OME6A / / 0 CS06RB OME6B / / 0 CS07RA OMEA CS07RB OMEB CS08F N/A *CS08R *OME / 85 / 85 CS09R OME / 85 / 85 CS00R OME / 50 8 / 95 cont. * These springs have a 0mm lower nd Stage than other springs in the series. + These springs have a 0mm higher nd stage than other springs in this series Page 0 OME NO. INT Nov09

105 SPECIFICATIONS LEAF SPRINGS Stack No. of Eye Dia. mm Weight Primary Spring Rate Dakar Part No. OME Part No. Height Leaves Front Rear (kg) Free lbf/in N/mm (mm) Camber mm CS0R OME / 57 8 / 00 CS0R OME / 88.0 / CS0R +OME / 570 / 00 CS0R OMEROD / 50 6 / 79 +CS05R +OMEROD / / 0 CS06R OME / 66 / 08 CS07R OME / 66 8 / 6 CS08R OMEROD / 57 0 / 80 +CS09R +OMEROD / 66 8 / 08 CS00R OMENN / 5 / 9 CS0R OMENN / 57 9 / 00 *CS0R *OMENN / / 7 CS0RA OMEJCA CS0RB OMEJCB CS05RA OMEJCA / 57 / 5 CS05RB OMEJCB / 57 / 5 CS06R OMEJR CS07R OMEJR CS08R OMES / 9 0 / 5 CS09R OMES / 8 0 / 6 CS00R OME / 5 6 / CS0R OME / 96 5 / 5 CS0R OME / 0 0 / 55 CS0R N/A / 0 0 / 60 CS0R N/A / 0 0 / 60 +CS05R N/A / / 6.8 CS06RA OME5A / 9 0 / CS06RB OME5B / 9 0 / CS07R N/A / 9 / 69 CS08R N/A / 6 9 / 7 CS09R N/A / 50 7/79 CS050R / CS50R N/A / 8 / 8 CS05R N/A / 55 / 9 CS05R N/A / 9 / 56 CS05R N/A / 65 7 / 6 CS056R N/A / 7 6 / 65 CS057R N/A / 67 / 0 CS058R N/A / 69 5 / Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow mm tolerance either side. * These springs have a 0mm lower nd Stage than other springs in the series. + These springs have a 0mm higher nd stage than other springs in this series Page 0 OME NO. INT Nov09

106 SPECIFICATIONS COIL SPRINGS Spring Number OME05 OME06 OME OME OME OME5 OME6 OME7 OME8 OME9 OME0 OME OME OME OME500 OME50 OME50 OME50 OME50 OME505 OME506 OME507 OME508 OME509 OME50 OME5 OME5 OME5 OME56 OME57 OME58 OME59 OME50 OME5 OME5 OME55 OME56 OME57 OME58 OME59 OME50 OME5 OME5 OME5 OME5 OME55 OME56 OME58 OME59 OME50 OME60 OME60 OME60 OME60 OME605 X5K Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns Kg lbf / in N / mm Rate Lbs X X / 0 70 / X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X cont. Page 0 OME NO. INT Nov09

107 SPECIFICATIONS COIL SPRINGS Spring Number OME606 OME607 OME608 OME609 OME60 OME6 OME6 OME6 OME6 OME65 OME66 OME67 OME68 OME69 OME60 OME6 OME6 OME6 OME6 OME65 OME700 OME70 OME70 OME70 OME70 OME7 OME7 OME7 OME7 OME75 OME7 OME7 OME75 OME76 OME75 OME75 OME75 OME755 OME760 OME76 OME76 OME76 OME76 OME766 OME767 OME768 OME770 OME776 OME777 OME779 OME780 OME78 OME790 OME79 OME79 X5K Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns Kg lbf / in N / mm Rate Lbs X X X X X X X X X X X X X X X X X X X X X X X X / 50 7 / 6 70 X / 50 7 / 6 70 X X X X X X X X / 5 00 X X X / 50 / 60 X X / X X X X X X X X X X / 0 / X X X X cont. Page 05 OME NO. INT Nov09

108 SPECIFICATIONS COIL SPRINGS Spring Number OME79 OME79 OME795 OME796 OME797 OME798 OME799 OME80 OME80 OME850 OME850J OME85 OME85 OME856 OME859 OME860 OME86 OME86 OME86 OME86J OME86 OME865 OME866 OME868 OME870 OME87 OME87 OME87 OME87 OME875 OME876 OME880 OME88 OME88 OME88 OME88 OME885 OME886 OME890 OME89 OME89 OME895 OME895E OME896 OME897 OME900 OME90 OME90 OME90 OME90 OME905 OME907 OME908 OME90 OME9 X5K Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns Kg lbf / in N / mm Rate Lbs X X X X X X X X X X X X X X X X X X X X X / 00 / 5 70 X X X X X X X X X X X X X X X X X X X X X X X X X X / 60 6 / 5 60 X / 0 / 0 60 cont. Page 06 OME NO. INT Nov09

109 SPECIFICATIONS COIL SPRINGS Spring Number OME9 OME9 OME9 OME95 OME97 OME98 OME99 OME90 OME9 OME9 OME9 OME9 OME95 OME96 OME97 OME98 OME99 OME90 OME9 OME9 OME9 OME9 OME95 OME96 OME97 OME98 OME90 OME9 OME9 OME9 OME9 OME95 OME97 OME98 OME99 OME950 OME95 OME95 OME95 OME95 OME955 OME956 OME959 OME960 OME96 OME96 OME96 OME965 OME966 OME967 OME968 OME969 OME970 OME97 OME97 X5K Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns Kg lbf / in N / mm Rate Lbs X / 00 / 5 60 X / 00 / X / 900 / X / / X / 80 5 / X X X X X X X X / 00 / 5 80 X X X X X X X / 90 6 / 5 60 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X cont. Page 07 OME NO. INT Nov09

110 SPECIFICATIONS COIL SPRINGS Spring Number OME97E OME97 OME97 OME97E OME975 OME976 OME980 OME98 OME98 OME98 OME98 OME985 OME990 OME99 OME99 OME99 OME99 OME995 OME996 OMEGQ0A OMEGQ0AM OMEGQ0B OMEGQ0C OMEGQ0CM OMEGQ0D OMEGQ0G OMEGQ0J OMEGQ0LP X5K Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns Kg lbf / in N / mm Rate Lbs X X X X X X X / 00 / X / 50 6 / X X X X X / 900 / X / / X / 0 9 / / 80 / X / / 50 9 / 6 80 X / 0 9 / / 80 / 9 80 X5K MICRO-ALLOYED SPRING STEEL is a new generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties. These properties are enhanced by additions of Silicon, Chromium, Vanadium Nickel along with lower Carbon than conventional spring steel grades. Page 08 OME NO. INT Nov09

111 SPECIFICATIONS OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS Dimensions Part No. D D d T L Number of Splines PT PT PT PTA PT PT PT PT PT PT PT PT PT8.7 None 6.0 None PT85.7 None.0 None PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT PT Page 09 OME NO. INT Nov09

112 APPLICATIONS NUMERICAL SPRING & SHOCK BUSH Kit No. OMESB Component Description spring bush PT60 Qty 6 To Fit Toyota 5mm spring eye, 8mm pin OE & OME Series F/H/B, J/ZJ: 75, 7, 7, 70, 60, 7, 5,, 0 Nissan GQ Patrol leaf spring models OME only OMESB OMESB spring bush PT80 spring bush PT8 spring bush PT8 Nissan MQ Patrol all models - rear OE spring Nissan MQ Patrol round headlight models-front OE spring eye OMESB spring bush PT0 spring bush PT9 OBSOLETE OMESB5 OMESB6 OMESB7 OMESB8 OMEB9 OMEB0 OMEB OMEB OMEB OMEB OMEB5 OMESB6 OMEB7 OMEB8 OMESB9 OMESB0 OMESB OMESB5 OMEB7 spring bush PT0 spring bush PT spring bush PT spring bush PTA spring bush PT90 spring bush PT9 spring bush PT9 shock bush SP78 / 9 shock bush SP056 (cotton reel type) shock bush OME066 / 6 shock bush SP09 shock bush SP09 shock bush OME78 / 6 shock bush OME066 / 9 spring bush PT70 shock bush OME066 / sleeve B7S x 6 x shock bush OME78 / 9 sleeve B6S 9 x 6 x spring bush PT0 spring bush PT0 sleeve B9S 6 x x 65 spring bush PT9 spring bush PT60 spring bush PT6 spring bush PT0 spring bush PT0 spring bush PT0 sleeve 6 x x 65 sleeve 6 x. x Toyota HiLux all models (except IFS front) Toyota HiLux all models (except SR5 & extra cab rear) Toyota FJ55 all models front & rear, 5 Series Rear only OE springs 0mm eye Mitsubishi Pajero leaf spring models & L00 models Small eye bush with 9mm bore Small eye shock mount Converts large eye 9mm bore to a 6mm bore Pin x 60 replacement bush Pin 0 x 60 replacement bush Small eye with 6mm bore Large eye with 9mm bore 0mm spring eye for Toyota 75 series rear springs Large eye tapered bush with sleeve Converts small eye bush to suit 9mm bore with sleeves Suzuki Sierra all models except LJ50 front & rear springs Toyota LandCruiser 0 series 5mm OE spring front & rear. Toyota 5 series OE front spring only 5mm eye. LandCruiser 0 series OE 5mm spring eye when ES0 extended shackles fitted Suzuki LJ50 front & rear N & N8 being converted for fitment to CJ Jeep and Cherokee wagon 8 on front bottom mount. Mahindra front & rear bottom mount. OMESB8 spring bush PT8 Nissan MQ Patrol early model (round headlights) - front spring, front eye (to be fitted with OMESB9) OMESB9 spring bush PT85 & sleeve Nissan MQ Patrol all models - front spring, rear eye (to be fitted with OMESB8) cont. Page 0 OME NO. INT Nov09

113 APPLICATIONS NUMERICAL SPRING & SHOCK BUSH Kit No. OMESB0 OMESB Component Description spring bush PT6 spring bush PT9 spring bush PT8 Qty To Fit Toyota LandCruiser 5/7 series front spring with 5mm spring eye and hanger bracket with 5mm pin hole Nissan MQ Patrol late model (square headlights) - front spring, front eye (to be fitted with OMESB9) OMEB6 OMESB8 OMEB0 OMEB OMESB OMESB57 OMESB6 OMESB75 OMESB76 OMESB77 OMEB78 OMESB79 OMESB80 OMESB8 OMESB8 OMESB8 OMESB8 shock bush OME066 / 9 spring bush PT9 spring bush PT9 spring bush PT05 sleeve 9 x. x 8 shock bush OME 066-9MGQ shock bush 05IY spring bush PT0 spring bush PT09 spring bush PT sleeve 9 x. x 68 spring bush PT06 spring bush PT07 sleeve 9 x 5 x 7 PT70 spring bush PT60 spring bush spring bush LA8 spring bush LA9 sleeve 9 x. x 9 sleeve 9 x 5 x 70 spring bush LA9 sleeve 9 x 5 x 70 shock bush LRR00 steering stabiliser bush Y75 spring bush PT08 spring bush PTA spring bush PT0 spring bush PT sleeve 9 x x 68 spring bush PT0 spring bush PT sleeve x 8 x 70 spring bush PT8 spring bush PT spring bush PT5 sleeve x 7 x 68 spring bush PT9 spring bush PT9 spring bush PT6 sleeve x 6 x 80 spring bush PT7 spring bush PT8 sleeve 0 x x large eye 9mm bore All Triton to 997 and L00 - rear - suits OME springs only N0, NF & N9 Patrol GQ lower mount - rear shock pin x 70 replacement Toyota HiLux IFS extra cab & SR5 dual cab models being fitted with OME8 series spring Jeep Wrangler - front & rear to suit OE shackles Nissan Patrol GQ leaf spring cab chassis OME spring - rear Land Rover series III 88" & 09" spring & shackle bushes OE replacement - front Land Rover series III 88" & 09" spring & shackle bushes OE replacement - rear Land Rover series III 88" & 09" lower shock bush- rear Pin 0 x 60mm steering stabiliser mount LandCruiser F/HJ5, 7 LWB models - OME spring Holden / Isuzu Rodeo tonne rear spring to suit OE & OME springs Nissan Navara tonne rear spring to suit OE & OME springs Mazda / Ford Tonne x 987 on rear spring OE & OME Mitsubishi Challenger / Montero rear spring to suit OME9 only Toyota LandCruiser 79 Series cab chassis & utility model only suit OME springs only cont. Page OME NO. INT Nov09

114 APPLICATIONS NUMERICAL SPRING & SHOCK BUSH Kit No. Component Description Qty To Fit OMESB85 spring bush PT70 Toyota LandCruiser 78 & 79 Series spring bush PT7 must be used with OME springs & greasable shackle kit only OMESB86 spring bush PT7 Toyota LandCruiser 76 & 78 Series spring bush PT8 Rear suit OME springs with OE shackles. spring bush PT9 sleeve 0 x x 86 OMESB87 spring bush PT07 Jeep YJ Wrangler front and rear spring bush PT0 Use only with greasable shackle OMEGS spring bush PT sleeve 9 x 5 x 7 OMESB88 spring bush PT Toyota Tacoma rear shackle bushes only spring bush PT Use with OME springs OMESB89 spring bush PT spring bush PT Toyota Tacoma rear shackle bushes for OEM shackles sleeve 8 x x 69 OMESB90 spring bush PT Holden/Isuzu Jackaroo Trooper 98-9 OMESB9 OMESB95 spring bush PT8 spring bush PT0 spring bush PT spring bush PT6 sleeve x 8 x 70 spring bush PT6 rear OME spring Nissan Navara D model - rear spring to suit OE & OME springs Nissan D0 Navara suits OE shackle spring bush PT kit only OMESB96 spring bush PT Nissan D0 Navara suits OME greasable spring bush PT5 shackle kit only OMESB97 OMESB98 spring bush PT8 spring bush PT spring bush PT sleeve 97 spring bush PT8 Mazda BT50 / Ford Ranger 006 on Toyota HiLux 005 on spring bush PT9 to suit OE & OME springs OMESB99 spring bush PT0 sleeve 9 x x 7 spring bush PT8 Nissan Navara D0 spring bush PT6 suits original shackle kit only. OMESB00 spring bush PT sleeve 8 x x 69 spring bush PT8 Nissan Navara D0 spring bush PT suits OME greasable shackle spring bush PT5 kit: OMEGS5. sleeve 8 x x 69 Page OME NO. INT Nov09

115 SPECIFICATIONS STEERING STABILISERS Part Number Upper Mount Type (mm) Lower Mount Type (mm) OMESD0 Eye with Bush Eye with Bush OMESD0 Eye with Bush & Sleeve Eye with Bush & Sleeve OMESD Pin 60 x 9.5 Pin 60 x 9.5 OMESD6 Pin 60 x 9.5 Pin 60 x 9.5 OMESD7 Eye with Bush Eye with Bush OMESD OMESD Pin 60 x 9.5 Eye with Bush Eye with Bush Eye with Bush OMESD Eye with Bush Eye with Bush OMESD Eye with Bush Eye with Bush OMESD0 Eye with Bush & Sleeve Eye with Bush & Sleeve OMESD Eye with Bush & Sleeve Eye with Bush & Sleeve OMESD Pin 60 x 9.5 Eye with Bush & Sleeve OMESD Eye with Bush & Mounting Pin Eye with Bush OMESD Eye with Bush & Sleeve Eye with Bush OMESD5 Eye with Bush & Sleeve Eye with Bush & Sleeve OMESD6 Pin 60 x 9.5 Pin 60 x 9.5 OMESD0 Eye with Bush Eye with Bush & Sleeve OMESD7 Eye with Bush Eye with Bush Open Closed No. of Length Length Mounting Kit No. Kits (mm) (mm) OME Bush Kit No Kit No Kit OMEB No Kit OMEB0 & B No Kit OMEB0 & B No Kit OMEB0 & B 50 No Kit Page OME NO. INT Nov09

116 TORSION BAR FITTING HINTS TORSION BAR REMOVAL. Before removing the original Torsion bars, the vehicle's front and rear rim to guard measurements must be taken and noted down, as per image A. Image A: Ride height is measured from the bottom of the rim to the wheel arch vertically through the centre of the hub. A. Using either a hoist or axle stands, raise the vehicle so that the front suspension is off the ground. ADJUSTING BOLT. Image B: After cleaning and lubricating the two adjusting bolts, in the torsion bar anchor arms, measure and note the amount of thread protruding through the lock nut.. Using only hand tools loosen and remove the adjusting bolts. 5. Remove torsion bar and anchor arm assembly. Slide anchor arm and dust covers (if applicable) off the torsion bars. TORSION BAR ANCHOR ARM NUT B 6. Thoroughly clean the anchor arms, adjusting bolts and dust covers. TORSION BAR INSTALLATION 7. Image C: As each OME torsion bar is preset they are marked (LH) and (RH) and because of this they must only be installed as marked. As viewed from the driver's seat: LH -to the left hand side. RH -to the right hand side. 8. Image D: Where there is a master spline on the torsion bars (shown C in white) on installation they must be aligned to the anchor arms. Where the torsion bars have the same spline sizes at each end, the torsion bar can be installed with either end to the front. 9. Slide the dust cover (if applicable) over the Old Man Emu torsion bars and apply grease to all splines and threads. D 0. Install the torsion bar and align the anchor arm so the adjusting bolt is just protruding through the anchor nut. If required, the torsion bar can be rotated one spline at a time to adjust the position of the anchor arm.. Tighten the adjusting bolts so the same amount of thread, as noted in step, protrudes. Install dust covers.. Lower the vehicle back onto its wheels and drive a short distance to settle the front suspension. Page OME NO. INT Nov09

117 TORSION BAR FITTING HINTS TORSION BAR ADJUSTMENT NB - All torsion bar adjustments must be done with the vehicle raised off the ground and the front suspension hanging. Do NOT adjust the torsion bars with the vehicle wheels on the ground.. Image E: Park the vehicle on level ground and measure the vehicle's rim to guard measurements.. Use the torsion bar anchor arm adjusting bolt to raise or lower the vehicle's ride height, also to trim the vehicle from side to side, to the desired height. SUSPENSION DROOP CHECK 5. To maintain good drive shaft, ball joint angles and to stop constant front suspension top out, it is important to check after adjusting the vehicle's ride height, that the vehicle has enough front wheel droop. Generally, a vehicle must have a minimum of 50 to 70mm of downward wheel travel (droop) 6. Image E: Front suspension droop is checked by taking the vehicle's front rim to guard measurement, while the wheels are on the ground and noting it down. Image F: Then raise the front until the wheels are off the ground and take another rim to guard measurement and note it down. By subtracting the E image measurement from the F image measurement, the amount of droop will be obtained. Carry out any adjustment t that t may be required. 7. All vehicles will require a headlight, front end alignment, and tyre pressure check after the fitment of new torsion bars. E F Page 5 OME NO. INT Nov09

118 STRUT CARTRIDGE FITMENT INSTRUCTIONS Installation Procedure: Using a hammer, tap the steel bump cap upward. Remove and discard the bump cap. Shown is the tube cutter used in these instructions. This tube cutter is available through ridgid tools ( Model No. 5. Catalog No. 6. Capacity / - 5/8 (6-66mm) Using the tube cutter, cut 0-5mm 5mm off the top of the strut tube as shown. Remove the shaft assembly and discard. Drain all the remaining oil from the strut tube mm gap Remove the paint from around the top of the strut using abrasive paper. Thread the locking ring into the strut adaptor leaving a mm gap as shown. Place the OME Cartridge into the strut tube. 0 0 Slide the adaptor and locking ring over the cartridge & strut tube. Push the adaptor all the way down until the locking ring is resting on the cartridge. Whilst holding down the adaptor, place small tack welds evenly around the base of the adaptor Page 6 OME NO. INT Nov09

119 STRUT CARTRIDGE FITMENT INSTRUCTIONS 5 Small tack weld shown Remove the cartridge and locking ring 5 Place evenly spaced 0 mm welds around the adaptor. THIS OPERATION MUST BE DONE BY A COMPETENT WELDER Welded adaptor shown. 7 Paint the adaptor and welds black. 8 Add 5cc of oil to the strut tube. Note: Oil type is not important. ie. Original oil, engine oil, gearbox oil. 9 0 Oil Level 9 Place the cartridge all the way into the strut then lift out to check oil level. 0 The oil level should be between 50-00mm up the cartridge. After checking oil level; reinstall the cartridge by firmly tightening the locking ring. The strut can now be reassembled and installed into the vehicle. Page 7 OME NO. INT Nov09