Linear Actuator with Toothed Belt and Integrated Guide with Roller Guide with Recirculating Ball Bearing Guide. Series OSP-E..BHD

Size: px

Start display at page:

Download "Linear Actuator with Toothed Belt and Integrated Guide with Roller Guide with Recirculating Ball Bearing Guide. Series OSP-E..BHD"

Jessie Boone
6 years ago
Views:

1 inear ctuator with Toothed elt and Integrated Guide with Roller Guide with Recirculating all earing Guide Series OSP-E..HD Contents Description Page Overview Version with Roller Guide Technical Data Dimensions 18, 23 Version with Recirculating all earing Guide Technical Data Dimensions 22, 23 11

The System Concept EECTRIC INER CTUTOR FOR HEVY DUTY PPICTIONS The latest generation of high capacity linear drives, the OSP-E..HD series combines robustness, precision and high performance.

inear ctuator with Toothed elt and Integrated Roller Guide or Integrated Recirculating all earing Guide for high force output dvantages: ccurate path and position control High force output High speed

2 The System Concept EECTRIC INER CTUTOR FOR HEVY DUTY PPICTIONS The latest generation of high capacity linear drives, the OSP-E..HD series combines robustness, precision and high performance. The aesthetic design is easily integrated into machine constructions by virtue of extremely adaptable mountings. inear ctuator with Toothed elt and Integrated Roller Guide or Integrated Recirculating all earing Guide for high force output dvantages: ccurate path and position control High force output High speed operation High load capacity Easy installation ow maintenance Ideal for multi-axis applications Threaded mounting holes Integrated planetary gearbox (option) Features: Integrated roller guide or integrated recirculating ball bearing guide Complete motor and control pacages Optional integrated planetary gearbox Diverse range of multi-axis connection parts Diverse range of accessories and mountings Special options available Version with Integrated Roller Guide Clamp shaft for zero-baclash coupling of motors and external gear arrangements Steel reinforced toothed belt Version with Integrated Recirculating all earing Guide hardened steel trac with high precision 12

Optional Integrated PNETRY GEROX Highly compact and rigid solution fully integrated in the drive end housing Purpose designed for the HD series vailable with three standard ratlos (3, 5 and 10) Very

3 Optional Integrated PNETRY GEROX Highly compact and rigid solution fully integrated in the drive end housing Purpose designed for the HD series vailable with three standard ratlos (3, 5 and 10) Very low baclash wide range of available motor flanges OPTION Hollow shaft with eyway Stainless steel sealing band Carriage Threaded mounting holes compatible with Proline series Rollers on needle bearings for smooth operation up to 10 m/s Permanent magnet for position sensing Slotted profile with dovetail grooves The dovetailed mounting rails of the new linear actuator expand its function into that of a universal system carrier. Modular system components are simply clamped on. Version with Integrated Roller guide Guide rail with precision ground and calibrated bearing tracs Version with Integrated Recirculating all earing Guide I-PRTING version for perfectly synchronised bi-parting movements MUTI-XIS wide range of adapter plates and intermediate drive shafts simplify engineering and installation Steel runner bloc with integrated scraper system and grease nipples 13

4 ccessories OPTIONS ND CCESSORIES SERIES OSP-E, ET DRIVES WITH INTEGRTED GUIDE STNDRD VERSIONS OSP-E..HD Version with Roller Guide Page 15 Version with Recirculating all earing Guide Page 19 INTEGRTED PNETRY GEROX Page 23 For required torque and speed reduction MID-SECTION SUPPORT Page 41 For supporting long actuators or mounting the actuator on dovetail grooves. Standard carrier with integrated roller guide. Dovetail profile for mounting of accessories and the actuator itself. MGNETIC SWITCHES SERIES RS ND ES SIC CTUTOR OPTIONS CMP SHFT WITH CONNECTION SHFT For connection to connecting shaft (Page 38) Page 130 For electrical sensing of end of stroe and intermediate carrier positions. Schlittens. I-PRTING VERSION Page 18 For perfectly synchronised bi-parting movements. HOOW SHFT WITH KEYWY For close coupling of motors and MOTOR MOUNTINGS Page 44 For linear drive with clamp shaft external gears DRIVE SHFT OPTIONS CTUTING DIRECTION Page 144 Important in parallel operations, e.g. with intermediate drive shaft (Standard) CCESSORIES END CP MOUNTING Page 40 For mounting the drives on the end cap Page 25 For connection of linear drives in multi-axis systems. Carrier to carrier or carrier to profile and connecting shaft for parallel drive arrangements are available. The right to introduce technical modifications is reserved (Standard i-parting Version) 14

5 Characteristics Characteristics Symbol Unit Description General Futures Type elt-driven inear ctuator with integrated roller guide Series OSP-E..HD / OSP-E..HD-P Mounting See drawings mbient ϑ min C -30 Temperature range ϑ max C +80 Weight (mass) g See table Installation In any position Slotted profile Extruded anodized aluminium Toothed belt Steel-corded polyurethane elt wheels luminium Rails luminium Tracs High alloy spring steel Roller casettes Roller bearing steel in aluminium casing Sealing band Hardened stainless steel Screws, nuts Zinc plated steel Mountings Zinc plated steel and aluminium Encapsulation class IP 54 Material Weight (mass) g and Inertia Series Weight (mass) g] Inertia [x 10-6 /gm 2 ] t stroe 0 m dd per metre stroe Moving mass t stroe 0 m dd per metre OSP-E25HD OSP-E32HD OSP-E50HD OSP-E25HD-P OSP-E32HD-P OSP-E50HD-P inear ctuator with Toothed elt and Integrated Roller Guide Series OSP-E..HD Size 25, 32, 50 OSP ORIG SYSTEM PUS Standard Versions: Standard carrier with integrated roller guide Dovetail profile for mounting of accessories and the actuator itself Clamp shaft Special Versions: i-parting version for synchronised movements (OSP-E..HD -P). Integrated planetary gearbox. Drive shaft / ctuating direction Clamp shaft with connection shaft (for use in Mutli-xis systems with connecting shaft) Hollow shaft with eyway The right to introduce technical modifications is reserved Installation Instructions Use the threaded holes in the end cap for mounting the linear actuator. Chec if mid-section supports are needed using the maximum allowable unsupported length graph on page 17. t least one end cap must be secured to prevent axial sliding when midsection support is used. Maintenance ll moving parts are lifetime lubricated. We recommend a chec of the linear actuator after an operation time of 12 months of operation or 3000 m, depending on the type of application. Please see separate instructions. Commissioning The products in this data sheet should not be operated until the machine/ application in which they are used has passed necessary inspection. 15

6 Sizing Performance Overview Maximum oadings Sizing of inear ctuator The following steps are recommended: 1. Calculate the static and the dynamic moments [Nm] created by the load [N], the distance r [m] and the acceleration a [m/s 2 ] in all directions (M, M s and M v ) according to the diagram below. 2. Mae a preliminary choice and get the calculation factors from the table. 3. Chec maximum allowable torque on the drive shaft (pay attention to the note under the table). If the value is lower than required, overview the moving profile or select if possible a bigger unit. 4. efore sizing and specifying the motor, the rms torque must be calculated using the cycle time of the application. 5. Chec that maximum allowable unsupported length is not exceeded (see page 17). Performance Overview Characteristics Unit Description Series OSP-E25HD OSP-E32HD OSP-E50HD Max. speed [m/s] inear motion per revolution, [mm] drive shaft Max. rpm. drive shaft [min -1 ] Max. effective < 1 m/s: [N] action force 1-3 m/s: [N] F at speed > 3-10 m/s: [N] No-load torque [Nm] Max. acceleration/deceleration [m/s 2 ] Repeatability [mm/m] ±0.05 ±0.05 ±0.05 Max. standard stroe length [mm] Maximum llowable Torque on Drive Shaft Speed and Stroe T2 OSP-E25HD OSP-E32HD OSP-E50HD Speed Torque Stroe Torque Speed Torque Stroe Torque Speed Torque Stroe Torque [m/s] [Nm] [m] [Nm] [m/s] [Nm] [m] [Nm] [m/s] [Nm] [m] [Nm] Important: The maximum permissible moment on the drive shaft is the lowest value of the speed- or stroe-dependent moment value. Example above: OSP-E25HD-stroe 5 m, required speed 3 m/s from table T2; speed 3 m/s gives 25 Nm and stroe 5 m gives 21 Nm. Max. torque for this application is 21 Nm. When sizing i-parting units the stroe is the ordering stroe, see page 8. Maximum llowable oadings r F M Ms Mv Series Max. applied load Max. moments [Nm] [N] M M s M v OSP-E25HD OSP-E32HD OSP-E50HD r M = F r ending moments are calculated from the centre of the linear actuator and F indicates actual force M M s M v (max) M (max) M (max) M (max) s v M = M stat + M dyn M s M v = M s, stat + M s, dyn = M v, stat + M v, dyn The total of the loads must not exceed 1 under any circumstances. 16

7 Maximum llowable Unsupported ength Placing of Mid-Section Support Maximum llowable Unsupported ength Stroe ength l X l Z Stroe ength The stroe lengths of the linear actuators are available in multiples of 10 mm up to 7000 mm l y Other stroe lengths are available on request. The end of stroe must not be used as a mechanical stop. llow an additional safety clearance at both ends equivalent to the linear movement of one revolution of the drive shaft, but at least 100 mm. l X The use of an C motor with frequency converter normally requires a larger clearance than that required for servo systems. l y l Z For advice, please contact your local HOERIGER-ORIG technical support department. * For i-parting version the max. load () is the total load of both carriers = carrier 1 + carrier 2 = Max. allowable distance between mountings/mid-section support for a given load When loadings are below or up to the curve in the graph below the deflection will be max % of distance oad [N] = HD-25lx 2 = HD-32lx 4 = HD-50lx 3 = HD-25ly 5 = HD-32ly 6 = HD-50ly ,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 [m] Max. distance 17

8 elt Driven inear ctuator with Roller Guide asic Unit Series OSP-E25HD, -E32HD, -E50HD Connection shaft for intermediate drive shaft use (option) ÆKR stroe *** KO KP ÆKN KF V J X (4x) Y x ZZ (10 threads) Mounting holes for motor flange or external planetary gearbox ** Hollow shaft with eyway (option) ** Note: The mounting holes for the coupling housing/motor flange/gearbox are located on the opposite side to the carrier as standard. s an option they can be located on the same side as the carrier. (For additional drive shaft/actuating direction options see the Order Instructions on page 144). Dimension Table (mm) Serie K* KC KJ K KT KU OSP-E25HD 16 H M8 OSP-E32HD 22 H M10 OSP-E50HD 32 H M12 *Other dimensions for K on request Options i-parting Version Series OSP-E25HD-P, -E32HD-P, -E50HD-P stroe to be ordered*** stroe / 2 KM (min) / KM (rec.) stroe / 2 *** Note: The mechanical end position must not be used as a mechancial end stop. llow an additional safety clearance at both ends equivalent to the linear movement of one revolution of the drive shaft, but at least 100 mm. The use of an C motor with frequency converter normally requires a larger safety clearance than that required for servo systems. For further information please contact you local HOERIGER-ORIG representative. Dimension Table (mm) Series C E G H J K M S V X Y CE CF EC EF F FH KF KJ KM min KM rec. KN KO KP KR KS* KT KU ZZ OSP-E25HD M M h7 16 H7 82 M8 8 OSP-E32HD M M h7 22 H7 106 M10 10 OSP-E50HD M M h7 32 H7 144 M12 10 *Other dimensions for KS on request 18

9 Characteristics Characteristics Symbol Unit Description General Features Type elt-driven inear ctuator with integrated Recirculating all earing Guide Series OSP-E..HD / OSP-E..HD-P Mounting See drawings mbient ϑ min C -30 Temperature range ϑ max C +80 Weight (mass) g See table Installation In any position Slotted profile Extruded anodized aluminium Toothed belt Steel-corded polyurethane elt wheels luminium Rail Steel Trac hardened steel trac with high precision, accuracy class H Runner bloc Steel runner bloc with integrated scraper system, grease nipples, preloaded 0.02xC, accuracy H (N for Ø25) Sealing band Hardened stainless steel Screws, nuts Zinc plated steel Mountings Zinc plated steel and aluminium Encapsulation class IP 54 Material Weight (mass) g and Inertia Series Weight (mass) [g] Inertia [x 10-6 gm 2 ] t stroe 0 m dd per metre stroe Moving mass t stroe 0 m dd per metre stroe dd per g Mass OSP-E25HD OSP-E32HD OSP-E50HD OSP-E25HD-P OSP-E32HD-P OSP-E50HD-P inear ctuator with Toothed elt and Integrated Recirculating all earing Guide Series OSP-E..HD Size 25, 32, 50 OSP ORIG SYSTEM PUS Standard Versions: Standard carrier with integrated recirculating ball bearing guide Dovetail profile for mounting of accessories and the actuator itself Clamp shaft Special Versions: i-parting version for synchronised movements (OSP-E..HD -P). Integrated planetary gearbox. Drive shaft / ctuating direction Clamp shaft with connection shaft (for use in Multi-xis systems with connecting shaft) Hollow shaft with eyway Installation Instructions Use the threaded holes in the end cap for mounting the linear actuator. Chec if mid-section supports are needed using the maximum allowable unsupported length graph on page 21. t least one end cap must be secured to prevent axial sliding when midsection support is used. Maintenance We recommend a chec of the linear actuator after an operation time of 12 months of operation or 3000 m, depending on the type of application. Please see separate instructions. Commissioning The products in this data sheet should not be operated until the machine/ application in which they are used has passed necessary inspection. 19

10 Sizing Performance Overview Maximum oadings Sizing of inear ctuator The following steps are recommended: 1. Calculate the static and the dynamic moments [Nm] created by the load [N], the distance r [m] and the acceleration a [m/s 2 ] in all directions (M, M s and M v ) according to the diagram below. 2. Mae a preliminary choice and get the calculation factors from the table. 3. Chec maximum allowable torque on the drive shaft (pay attention to the note under the table). If the value is lower than required, overview the moving profile or select if possible a bigger unit. 4. efore sizing and specifying the motor, the rms torque must be calculated using the cycle time of the application. 5. Chec that maximum allowable unsupported length is not exceeded (see page 21). Performance Overview Characteristics Unit Description Series OSP-E25HD OSP-E32HD OSP-E50HD Max. speed [m/s] 5 1) 5 1) 5 1) inear motion per revolution, [mm] drive shaft Max. rpm. drive shaft [min -1 ] Max. effetive < 1 m/s: [N] action force F 1-3 m/s: [N] at speed > 3 m/s: [N] No-load torque [Nm] Max. acceleration/deceleration [m/s 2 ] Repeatability [mm/m] ±0.05 ±0.05 ±0.05 Max. standard stroe length [mm] ) ) ) 1) up to 10 m/s on request 2) longer stroes on request Maximum llowable Torque on Drive Shaft Speed and Stroe T2 OSP-E25HD OSP-E32HD OSP-E50HD Speed Torque Stroe Torque Speed Torque Stroe Torque Speed Torque Stroe Torque [m/s] [Nm] [m] [Nm] [m/s] [Nm] [m] [Nm] [m/s] [Nm] [m] [Nm] Important: The maximum permissible moment on the drive shaft is the lowest value of the speed- or stroe-dependent moment value. Example above: OSP-E25HD-stroe 5 m, required speed 3 m/s from table T2; speed 3 m/s gives 25 Nm and stroe 5 m gives 21 Nm. Max. torque for this application is 21 Nm. When sizing i-parting units the stroe is the ordering stroe, see page 22. M 1 2 Ms Maximum llowable oadings Series Max. applied load Max. moments [Nm] 1[N] 2[N] M M s M v OSP-E25HD OSP-E32HD OSP-E50HD If multiple forces and moments act upon the actuator simultaneously, the following equation applies. r r F Mv M = F r ending moments are calculated from the centre of the linear actuator and F indicates actual force M = M stat + M dyn 1 2 M M s M v (max) 2 (max) M (max) M (max) M (max) s v The total of the loads must not exceed 1 under any circumstances. M s M v = M s, stat + M s, dyn = M v, stat + M v, dyn 20

11 Maximum llowable Unsupported ength Placing of Mid-Section Support l X Maximum llowable Unsupported ength Stroe ength Stroe ength l y l Z The stroe lengths of the linear actuators are available in multiples of 10 mm up to 5700 mm Other stroe lengths are available on request. l y l X l Z The end of stroe must not be used as a mechanical stop. llow an additional safety clearance at both ends equivalent to the linear movement of one revolution of the drive shaft, but at least 100 mm. The use of an C motor with frequency converter normally requires a larger clearance than that required for servo systems. For advice, please contact your local HOERIGER-ORIG technical support department. * For i-parting version the max. load () is the total load of both carriers = carrier 1 + carrier 2 = Max. allowable distance between mountings/mid-section support for a given load When loadings are below or up to the curve in the graph below the deflection will be max % of distance oad [N] = HD-25lx 2 = HD-32lx 4 = HD-50lx 3 = HD-25ly 5 = HD-32ly 6 = HD-50ly ,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 [m] Max. distance 21

12 elt Driven inear ctuator with Recirculating all earing Guide asic Unit Series OSP-E25HD, -E32HD, -E50HD Connection shaft for intermediate drive shaft use (option) stroe *** KP ØKR G x H (8x) S KO ÆKN KF J X (4x) Y x ZZ (10 threads) Mounting holes for motor flange or external planetary gearbox ** KU x KJ (4x) V ÆKT CE EF M CF E EC C ÆKS K FH F 10,4 ** Note: The mounting holes for the coupling housing/motor flange/gearbox are located on the opposite side to the carrier as standard. s an option they can be located on the same side as the carrier. (For additional drive shaft/actuating direction options see the Order Instructions on page 144). Hollow shaft with eyway (option) Dimension Table (mm) Series K* KC KJ K KT KU OSP-E25HD 16 H M8 OSP-E32HD 22 H M10 OSP-E50HD 32 H M12 ÆKT ÆK KU x KJ (4x) KC K *Other dimensions for K on request Options i-parting Version Series OSP-E25HD-P, -E32HD-P, -E50HD-P stroe to be ordered*** stroe / 2 KM (min) / KM (rec.) stroe / 2 *** Note: The mechanical end position must not be used as a mechancial end stop. llow an additional safety clearance at both ends equivalent to the linear movement of one revolution of the drive shaft, but at least 100 mm. The use of an C motor with frequency converter normally requires a larger safety clearance than that required for servo systems. For further information please contact you local HOERIGER-ORIG representative. Dimension Table (mm) Series C E G H J K M S V X Y CE CF EC EF F FH KF KJ KM min KM rec. KN KO KP KR KS* KT KU ZZ OSP-E25HD M M h7 16 H7 82 M8 8 OSP-E32HD M M h7 22 H7 106 M10 10 OSP-E50HD M M h7 32 H7 144 M12 10 *Other dimensions for KS on request 22

13 Series OSP-E..HD with optional Integrated Planetary Gearbox Integrated Planetary Gearbox Features Highly compact and rigid solution fully integrated in the drive end housing Purpose designed for the HD series vailable with three standard ratios (3, 5 and 10) Very low baclash wide range of available motor flanges Performance Overview Characteristics Unit Description OSP-E25HD OSP-E32HD OSP-E50HD Ratio (1-stage) i 3/5/10 3/5/10 3/5/10 Max axial load F amax [N] Torsional rigidity (i=5) C t.21 [Nm/arcmin] Torsional rigidity (i=3/10) C t.21 [Nm/arcmin] Torsional baclash J t [arcmin] <12 <12 <12 inear movement [mm] per rotation of drive shaft Nominal input speed n nom [min -1 ] Max input speed n 1max [min -1 ] No-load running torque at Nominal input speed T 012 [Nm] <0.14 <0.51 <1.5 ifetime [h] Efficiency (1-stage) η [%] >97 >97 >97 Noise level P [db] <70 <72 <74 (n 1 =3000 min -1 ) Dimensions Please contact your local HOERIGER-ORIG technical support for available motor flanges. For motors and controllers, see separate catalogue. Material: luminium (-H) / Steel (St-H) Standard Version: Gearbox on opposite side to carrier Special Version: Gearbox on same side as carrier Note: When ordering, specify type of motor and model for correct motor flange. N N NC NC (For drive shaft/actuating direction options, see information on page 144). Dimension Table (mm) and additional Weight (g) Series N N NC Weight (mass) [g] OSP-E25HD OSP-E32HD OSP-E50HD

14 24

Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD

Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD inear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD Contents Description Data Sheet No. Page Overview 1.15.001E 11-14 Technical Data 1.15.002E-1 to 3 15-17 Dimensions 1.15.002E-4