SIT S.p.A. Commercial & Technical Office, Central Warehouse. Viale A. Volta, Cusago (MI) - Italy Tel Fax

Transcription

1 opertina_atene EN_over ing.qxd 26/01/ :31 Pagina 1 ommercial & Technical Office, entral arehouse SIT S.p.. Viale. Volta, usago (MI) - Italy Tel Fax export@sitspa.it ebsite: Factory Via G. arminati, Val Brembilla (BG) - Italy Tel S.I.T. INDEV, Inc. tra. N-II, Km 592, Green Park ircle E S.ndreu De La Barca (Barcellona) N harlotte Tel Tel Fax Fax dinamica@dinamica.net info@sit-indeva.com FOGEX GERHRD BELL 215, Rue Henri Barbusse Billrothstrasse 32 F rgenteuil edex Traun Tel Tel. +43 (0) Fax Fax +43 (0) fogex@magic.fr gerhard.bell@liwest.at SIT NTRIEBSELEMENTE GmbH SIT (SHNGHI) LTD. Rieseler Feld 9 (Gewerbegebiet est) Shanghai Nanhui Industrial park D Brakel Yuanzhong Road Tel # Building No 269 Fax PR Shanghai info@sit-antriebselemente.de Tel Fax SIT (Schweiz) G Lenzbüel 13 H Sirnach Tel Fax info@sit-schweiz-ag.ch /15 (01/15) info@sit-shanghai.com SIT S.p.. ISO ert. n 0241 DINMI DISTRIBUIONES S.. Fax

2 Pag. HIN DRIVES INTRODUTION ND SELETION SIMPLEX SPROKETS DUPLEX SPROKETS TRIPEX SPROKETS SPROKETS ITH HRDENDED TEETH SIMPLEX PLTE HEELS DUPLEX PLTE HEELS TRIPLEX PLTE HEELS IDLER SPROKETS HINS DESIGNTION 135

3 SIT - SIT S.p.. can provide a wide and complete range of sprockets and plate sprockets up to a 2-inch pitch according to the British Standard, with plain or finished bore and keyway. merican Standard sprockets are available upon request. The materials used in sprockets are high-quality carbon steels (in forged steel or with welded hub). hen conditions call for heavy duty use, we can provide hardened teeth sprockets. In corrosive operating conditions, stainless steel is recommended. Special and custom sprockets according to customer s drawings are available on upon request. For specific projects, SIT S.p.. manufactures customized products such as: Stainless steel sprockets Sprockets with keyless shaft-to-hub locking device system ompound sprockets with 2 or more pitches and/or different number of teeth Split sprockets, made in two parts Taper bushing sprockets ast iron plate wheels 1

4 r i f f Reference Standards and metric sizes (ISO/R 606) Sprocket nomenclature is represented by the following diagrams: d d R R R M d M R p d R d f M R = hord pitch (equal to chain pitch)) = Roller max. diameter = diameter = Bottom diameter = Measurement across the pins p p M R 90 = + d R, min sprockets with even number of teeth MR = cos + d R, min sprockets with odd number of teeth 1 p d α 360 / 1 d ha re da 1 = polygon p = hord pitch (equal to chain pitch) = diameter d 1 = Roller max. diameter r i = Roller seat radius α = Tooth seat angle r e = Tooth side radius h a = Tooth height from polygon pitch d f = Bottom diameter = Number of teeth B3 r r a 3 B1 ra b 1 r a B 2 b 1 b 1 B2 r a b 1 b 1 r a B 1, b 1 B 2,B 3 P t r a r 3 = Tooth radius width = Tooth width for sprockets = idth for double and triple strand sprockets = ross pitch = Tooth base fillet radius = Tooth bevel radius Pt Pt Pt 2

5 diameter The sprocket pitch diameter is the diameter of a circle drawn through centers of the rollers of a chain wrapped around the sprocket: here: p = chain pitch = number of teeth 1 = p. 180 sin By knowing the chain pitch and the number of teeth, the following table allows for a rapid calculation of the sprocket diameter. Number of Tooth sin Number of Tooth sin Number of Tooth sin Number of Tooth sin 6 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Outer diameter The outer diameter is the diameter of the circle circumscribing the sprocket teeth. If the sprocket has an even number of teeth, this corresponds to the diameter which is measured from a tooth head to the diametrically opposite tooth head. = + (0,6 0,8) d 1 Tooth bottom diameter df This is obtained by calculating the ratio: df = - d1 with tolerances according to following table: Tooth bottom diameter d f Tolerance d f < d f ,25 0-0,30 De d1 Dm d f > 250 h11 B1 Thickness sprocket B 1 = (0,9 0,93) Internal width chain 3

6 How to select a transmission chain The first step in sizing the correct chain is to collect the design data: type of motor type of driven equipment rated torque drive shaft rotation speed and diameter driven shaft rotation speed and diameter distance between shaft centers tolerance of distance between shaft centers sprocket max. overall dimensions lubrication systems available, if any environmental conditions in which the chain drive will operate type of duty (continuous, intermittent, jolting during start or sharp stops) Service factor calculation The following parameters should be also known to better determine the drive service factor: starts/stops frequency required starting torque operating temperature large load variations during working cycles, if any driven shaft size available, if any Service factor Fs Load characteristics ombustion engines with hydraulic clutch Electric motors or turbines ombustion engines with friction clutch UNIFORM 1,0 1,0 1,2 PULSTING 1,3 1,3 1,4 TRIPPING 1,4 1,5 1,7 Design power calculation Pp = Pn Fs Pp Pn Fs = design power = engine rated power = service factor 4

7 How to choose a chain Use following alignment chart to choose the correct chain size according to the design power and the shaft rotation speed. Double check by calculating the stresses during operation. Rows of rollers hain pitch Design Power [hp] ,5 1 0,9 0,8 0,7 0,6 0, ,5 1 0,9 0,8 0,7 0,6 0,5 0, ,5 1 0,9 0,8 0,7 0,6 0,5 0,4 0, ,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 32B - 2 x 1 1/4 28B - 1 3/4 x 1 1/4 24B - 1 1/2 x 1 20B - 1 1/4 x 3/4 16B - 1 x 17,02 mm 12B - 3/4 x 7/16 10B - 5/8 x 3/8 08B - 1/2 x 5/16 06B - 3/8 x 7/32 05B - 8 x 3 mm 0,4 0,3 0,2 0, rpm alculation of minimum sprocket pitch diameter p = chain pitch da = shaft diameter = p + 2d a If you know the pitch diameter, you also know the number of teeth. Except for low-speed drives, it is not advisable to have sprockets with less than 17 teeth because this would increase polygonal effects and consequently also increase vibration on the chain with stresses between joints and impacts on the teeth. It is also recommended to have chain wrap greater than 120 to avoid the risk of non-mesh engagement on the sprocket

8 Shaft position The shaft should be positioned between the horizontal axis and 60 because the vertical position increases the possibility of chain release from the sprocket. If necessary, use a chain tensioning system. Recommended Not recommended Transmission ratio n RT = n 2 1 d 1 D 2 n1 n2 d D 1 2 = number of revolutions, high speed shaft = number of revolutions, low speed shaft = high speed shaft diameter = low speed shaft diameter = number of teeth of high speed sprocket = number of teeth of low speed sprocket s a rule, the maximum allowable transmission ratio is 8. If this value is exceeded, please adjust the application variables until the required value is reached. ontact our technical support department if you have questions. alculation of driven sprocket pitch diameter 2 = 1 RT By knowing the number of teeth, calculate the pitch diameter using the trigonometric table on page 3. hain length calculation e RT = 1 L = 2 + p If If RT 1 2 L = + p + 2 = distance between centers p = chain pitch [ No. of pitches ] + 0,1013 ( ) p 1 2 [ No. of pitches ] alculation of chain linear speed π n V = 60 [m / s] s a rule, if V > 5 m/s the centrifugal force influence acting on the drive becomes important. 6

9 alculation of forces acting on the drive hain pull 75 P T = V p g [N] Pp = design power [hp] V = chain linear speed[m/s] g = acceleration due to gravity(= 9.81 m/s 2 ) entrifugal force F = V 2 [N] = chain weight [kg/m] Resultant force FTOT = T + F [N] alculation of safety factor R k = F T TOT RT = chain ultimate strength FTOT = resultant force s a rule, the safety factor must be greater than 8. Values greater than 5 can be accepted if using high quality chains. Multiple chains If the chain cannot transmit all the required power, a multiple strand chain can be chosen by using following table as a reference, which considers the connection of 2 or more chains: Rows of rollers Multiple service factor Fm 2 1,7 3 2,5 4 3,3 5 and more ontact SIT support technical department Power design with multiple chains P p = P F n F m s P n F s F m = nominal engine power = service factor = multiple service factor Important notice: the ultimate strength, i.e. the static load which breaks the chain, is not the only parameter which defines the quality, because it is just a minimum value stated by the ISO and NSI Standards. The working load is more specific, because there are low quality chains with very high ultimate strengths but very low maximum allowable working loads. Generally, consider following this practical rule: the working load must be smaller than 1/6 of the ultimate strength and 50% of that value should not be exceeded, not even for one cycle, because this may permanently damage the chain components. 7

10 Installation of a transmission chain To optimize the sprocket life, the distance between the sprocket axes should be equal to a length between 30 and 50 times the chain pitch and, generally, the camber should not exceed 2% of the distance between centers. hen assembling, consider the manufacturing tolerance on the chain (generally equal to +0,15%) and make sure that the smaller sprocket has at least 17 teeth and that at least three of them are in mesh. E 2% E If the chain drive is verticle, we suggest that the motor sprocket position be higher than that of the driven sprocket to keep the chain in tension. If you want to place the motor sprocket in a lower position than the driven sprocket, we recommend that you use a chain tensioning system, because the chain must always be properly tensioned. Generally, the tensioning system should be at a distance of at least six pitches from the sprocket and it must press toward the drive inner side, in order to reduce the overall dimensions and to increase the wrap angle. onsequences of wrong tensioning could be: dditional fatigue on components Faster wear Noisy running Lower performance Bearings overloaded 8

11 hain assembly To assemble a chain, wrap it around the teeth of the sprockets and connect both ends on one of the two sprockets. There are two types of connecting links: spring clip links: these connecting links are used with chains up to 1 pitch. The closed part of the spring clip must face the direction of motion. Direction of motion split pin links: put the split pin into the pin hole and open it to create an angle not greater than 90. Do not reuse split pins after they have been removed. Pre-tensioning and pre-running These two operations remove surface imperfections which are present between the bushings and pins in a new chain, thus removing imperfections and reducing the lengthening of the chain which occurs during the initial startup. Pre-tensioning: this allows the chain to be tightened to near its yield point. Pre-running: the chain passes through a number of rotation cycles in order to reach a tension near its yield strength. pplied force Tensioned section Pre-run chain 9

12 hain lubrication Lubrication is a fundamental procedure to ensure the normal life of a chain. The key points for a proper and effective lubrication are the type of lubricant and the frequency of application. Theoretically, there should always be a layer of lubricant between the different chain surfaces. In particular, lubrication acts: to reduce the coefficient of friction to prevent chain wear and to increase operation life to prevent corrosion to dissipate heat generated during operation to lubricate the contact surfaces between chain and sprocket Ideally, for effective lubrication, the lubricant must go between pins, bushings, rollers and plates on the links, as shown in the picture below. Oil film in chain gaps Bushing Riveted pin Roller Inner block Inner link Outer plates hoice of lubricant For proper lubrication it is essential that components are always clean and free of impurities that may form during normal chain operation and which otherwise may build up between the lubrication layer and the contact surfaces, thus increasing the coefficient of friction. The lubricant to be used should have specific viscosity characteristics according to the operating temperature. Temperature interval [ ] Recommended lubricant [-6 ; +5] SE 20 [+5 ; +38] SE 30 [+38 ; +49] SE 40 [+49 ; +60] SE 50 hen the operating temperatures are higher than 300 we recommend using a synthetic lubricant with solids in suspension which ensures a dry lubrication after the liquid contents have evaporated. Since a large amount of smoke can be developed during this process, lubrication should be done at the lowest chain temperature area. 10

13 Lubrication methods Various lubrication methods can be used for chain drives. Manual lubrication The oil must go between the outer and the inner plate and between the bushing and the roller to reduce friction between the contact areas. Manual lubrication should be employed in very clean environments, because otherwise the dirt buildup compromises its effectiveness. In these cases we recommend abundant daily lubrication. Manual lubrication is recommended with speeds less than 1 m/s and the oil should be applied with oiler or brush. Drip-feed lubrication This is a continuous lubrication applied with a special device suitable for this kind of application. It is recommended with speeds up to 2,5 m/s. Oil bath lubrication The lowest chain section runs in an oil bath and the minimum oil level should reach the center line of the chain link. It is recommended with speeds up to 8 m/s. Forced lubrication system Forced lubrication system consists of an oil pump where the oil is forced under pressure through the lubricators placed over the chain for a very effective lubrication. To achive maximum lubrication result, lubricators should be placed near the mesh point of the lowest wheel. This is a very effective lubrication system for operating speeds higher than 8 m/s. 11

14 Problems and solutions The table below provides some information about the most common problems with transmission chains. Please note that the main problems (lubrication, noise, re-tensioning) can be easily solved by replacing chains with timing belts which do not require maintenance. Problem Possible cause Solution ear on one chain and/or sprocket side 1. Shafts are not parallel, sprockets are not aligned 1. Proper shaft alignment ear on a tooth head 1. nomalous chain elongation 2. Toothing error 1. Replace chain 2. Replace sprockets ear on sprocket sides 1. Material with low yield strength 1. hange sprockets with new ones made of suitable material or with hardened teeth hain vibration 1. Sprocket eccentricity 2. hain roller braking 1. Replace sprocket and check hole eccentricity 2. Replace worn components Premature elongation 1. Insufficient lubrication or chain is undersized 1. heck proper selection and /or improve lubrication Rust spots on the chain 1. Insufficient lubrication 1. Improve lubrication Tooth jumping 1. Insufficient chain tension 2. hain wear 1. Re-tension the chain, install a chain tensioning device 2. Replace the chain hain parts are broken 1. Overloaded transmission 2. orrosion 3. hain speed is too high 4. ontact with foreign objects during operation 5.Sprockets with wrong toothing 6. Insufficient lubrication 7. Insufficient chain tension 1. heck the selection of the chain 2. void corrosive environments, use stainless steel components 3. heck the selection of the chain 4. Remove foreign objects and check for proper chain protection 5. Replace sprockets 6. Improve lubrication. 7. heck the chain tension Excessive noise 1. Foreign objects in the transmission chain 2. Insufficient lubrication 3. orn or missing rollers 4. High misalignment 5. Tooth jumping 1. Make sure that no foreign objects interfere with the transmission chain 2. Improve lubrication 3. Replace worn components 4. lign shaft and sprockets 5. Re-tension the transmission chain 12

15 Sprockets for simplex, duplex and triplex chain Sprockets

16 INDEX Sprockets for simplex, duplex and triplex chain Page Simplex Sprockets ISO 04B-1 6 x 2,8 mm 15 ISO 05B-1 8 x 3 mm 16 ISO 06B-1 3/8 x 7/32 17 ISO /2 x 1/8 18 ISO /2 x 3/16 19 ISO 08B-1 1/2 x 5/16 20 ISO 10B-1 5/8 x 3/8 21 ISO 12B-1 3/4 x 7/16 22 ISO 16B-1 1 x 17,02 mm 23 ISO 20B-1 1 1/4 x 3/4 24 ISO 24B-1 1 1/2 x 1 25 ISO 28B-1 1 3/4 x 1 1/4 26 ISO 32B-1 2 x 1 1/4 27 Duplex Sprockets ISO 05B-2 8 x 3 mm 29 ISO 06B-2 3/8 x 7/32 29 ISO 08B-2 1/2 x 5/16 30 ISO 10B-2 5/8 x 3/8 31 ISO 12B-2 3/4 x 7/16 32 ISO 16B-2 1 x 17,02 mm 33 ISO 20B-2 1 1/4 x 3/4 34 ISO 24B-2 1 1/2 x 1 35 ISO 28B-2 1 3/4 x 1 1/4 36 ISO 32B-2 2 x 1 1/4 37 Triplex Sprockets ISO 06B-3 3/8 x 7/32 38 ISO 08B-3 1/2 x 5/16 39 ISO 10B-3 5/8 x 3/8 40 ISO 12B-3 3/4 x 7/16 41 ISO 16B-3 1 x 17,02 mm 42 ISO 20B-3 1 1/4 x 3/4 43 ISO 24B-3 1 1/2 x 1 44 ISO 28B-3 1 3/4 x 1 1/4 45 ISO 32B-3 2 x 1 1/4 46

17 SIMPLEX SPROKETS Simplex Sprocket for chain according to DIN ISO/R 606 ISO 04B-1 6 x 2,8 mm SPROKET Tooth radius r 3 6 Radius width 0,7 Tooth width B 1 2,6 De d1 Dm Simplex Sprockets HIN 6 Internal width 2,8 Roller ø 4 B1 D m d ,00 15,67 9, ,01 QPS04B ,90 17,54 11, ,01 QPS04B ,70 19, ,01 QPS04B ,60 21, ,01 QPS04B ,40 23, ,02 QPS04B ,30 25, ,02 QPS04B ,20 26, ,03 QPS04B ,00 28, ,03 QPS04B ,00 30, ,03 QPS04B ,00 32, ,04 QPS04B ,90 34, ,04 QPS04B ,80 36, ,04 QPS04B ,70 38, ,04 QPS04B ,60 40, ,06 QPS04B ,50 42, ,06 QPS04B ,40 44, ,06 QPS04B ,30 45, ,07 QPS04B ,20 47, ,07 QPS04B ,10 49, ,10 QPS04B ,00 51, ,10 QPS04B ,90 53, ,11 QPS04B ,80 55, ,11 QPS04B ,80 57, ,11 QPS04B ,70 59, ,11 QPS04B ,60 61, ,12 QPS04B ,50 63, ,12 QPS04B ,40 65, ,12 QPS04B ,30 66, ,13 QPS04B ,20 68, ,13 QPS04B ,10 70, ,14 QPS04B ,00 72, ,14 QPS04B ,90 74, ,14 QPS04B ,90 76, ,15 QPS04B ,50 86, ,46 QPS04B ,00 95, ,50 QPS04B ,40 108, ,53 QPS04B1-057 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 15

18 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 05B-1 8 x 3 mm SPROKET Tooth radius r 3 8 Radius width 1 Tooth width B 1 2,8 De d1 Dm HIN 8 Internal width 3 Roller ø 5 B1 D m d ,00 20, ,01 QPS05B ,60 23, ,02 QPS05B ,20 25, ,02 QPS05B ,70 28, ,03 QPS05B ,20 30, ,04 QPS05B ,70 33, ,05 QPS05B ,20 35, ,05 QPS05B ,70 38, ,07 QPS05B ,30 41, ,08 QPS05B ,80 43, ,09 QPS05B ,30 46, ,09 QPS05B ,90 48, ,09 QPS05B ,40 51, ,10 QPS05B ,00 53, ,12 QPS05B ,50 56, ,13 QPS05B ,00 58, ,13 QPS05B ,60 61, ,14 QPS05B ,50 63, ,15 QPS05B ,50 66, ,19 QPS05B ,20 68, ,20 QPS05B ,80 71, ,20 QPS05B ,30 73, ,21 QPS05B ,80 76, ,22 QPS05B ,40 79, ,22 QPS05B ,90 81, ,22 QPS05B ,50 84, ,23 QPS05B ,00 86, ,24 QPS05B ,50 89, ,25 QPS05B ,00 91, ,25 QPS05B ,60 94, ,26 QPS05B ,20 96, ,27 QPS05B ,70 99, ,28 QPS05B ,30 101, ,29 QPS05B ,00 114, ,58 QPS05B ,70 127, ,75 QPS05B ,60 145, ,00 QPS05B ,70 193, ,94 QPS05B1-076 Material: 45 (Fe360B with = 76) External diameter mm diameter mm D m Hub diameter mm eight kg 16

19 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 06B-1 3/8 x 7/32 SPROKET Tooth radius r 3 10 Radius width 1 Tooth width B 1 5,3 HIN 9,525 Internal width 5,72 Roller ø 6,35 De B1 d1 Dm Simplex Sprockets D m d ,00 24, ,03 QPS06B ,00 27, ,04 QPS06B ,00 30, ,05 QPS06B ,00 33, ,08 QPS06B ,00 36, ,10 QPS06B , ,13 QPS06B ,30 42, ,16 QPS06B ,30 45, ,19 QPS06B ,30 48, ,24 QPS06B ,30 51, ,28 QPS06B ,30 54, ,33 QPS06B ,30 57, ,36 QPS06B ,30 60, ,39 QPS06B ,00 63, ,42 QPS06B ,00 66, ,46 QPS06B ,50 69, ,50 QPS06B ,00 72, ,54 QPS06B ,00 76, ,60 QPS06B ,00 79, ,66 QPS06B ,00 82, ,67 QPS06B ,00 85, ,69 QPS06B ,00 88, ,70 QPS06B ,70 91, ,72 QPS06B ,30 94, ,87 QPS06B ,30 97, ,89 QPS06B ,30 100, ,91 QPS06B ,30 103, ,92 QPS06B ,40 106, ,95 QPS06B ,40 109, ,05 QPS06B ,40 112, ,09 QPS06B ,50 115, ,10 QPS06B ,50 118, ,12 QPS06B ,50 121, ,14 QPS06B ,70 136,55 * ,66 QPS06B ,70 151,69 * ,80 QPS06B ,90 172,91 * ,96 QPS06B ,90 230,49 * ,67 QPS06B ,50 288,08 * ,06 QPS06B ,50 345,68 * ,45 QPS06B1-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 17

20 Simplex Sprocket for chain according to DIN ISO/R 606 ISO /2 x 1/8 SPROKET Tooth radius r 3 13 Radius width 1 Tooth width B 1 3 idth H (con 31) 5 De d1 Dm H HIN 12,7 Internal width 3,3 Roller ø 7,75 B1 D m d ,20 33, ,04 QPS ,50 37, ,06 QPS ,20 41, ,07 QPS ,60 45, ,10 QPS ,90 49, ,13 QPS ,40 53, ,16 QPS ,80 57, ,19 QPS ,80 61, ,23 QPS ,90 65, ,29 QPS ,90 69, ,30 QPS ,90 73, ,31 QPS ,90 77, ,32 QPS ,90 81, ,33 QPS ,00 85, ,48 QPS ,00 89, ,49 QPS ,00 93, ,51 QPS ,00 97, ,52 QPS ,10 101, ,53 QPS ,20 105, ,67 QPS ,40 109, ,69 QPS ,40 113, ,70 QPS ,40 117, ,72 QPS ,50 121, ,74 QPS ,50 125, ,76 QPS ,50 129, ,77 QPS ,60 133, ,79 QPS ,60 137, ,81 QPS ,60 141, ,83 QPS ,70 145, ,00 QPS ,70 149, ,02 QPS ,80 153, ,04 QPS ,80 157, ,06 QPS ,80 161, ,09 QPS Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 18

21 Simplex Sprocket for chain according to DIN ISO/R 606 ISO /2 x 3/16 SPROKET Tooth radius r 3 13 Radius width 1,3 Tooth width B 1 4,5 HIN 12,7 Internal width 4,88 Roller ø 7,75 De B1 d1 Dm Simplex Sprockets D m d ,50 33, ,04 QPS ,50 37, ,06 QPS ,20 41, ,08 QPS ,60 45, ,11 QPS ,90 49, ,14 QPS ,40 53, ,17 QPS ,80 57, ,20 QPS ,80 61, ,24 QPS ,90 65, ,30 QPS ,90 69, ,31 QPS ,90 73, ,33 QPS ,90 77, ,34 QPS ,90 81, ,36 QPS ,00 85, ,51 QPS ,00 89, ,53 QPS ,00 93, ,55 QPS ,00 97, ,57 QPS ,10 101, ,59 QPS ,20 105, ,72 QPS ,40 109, ,74 QPS ,40 113, ,77 QPS ,40 117, ,79 QPS ,50 121, ,82 QPS ,50 125, ,85 QPS ,50 129, ,87 QPS ,60 133, ,90 QPS ,60 137, ,93 QPS ,60 141, ,96 QPS ,70 145, ,14 QPS ,70 149, ,17 QPS ,80 153, ,20 QPS ,80 157, ,24 QPS ,80 161, ,27 QPS Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 19

22 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 08B-1 1/2 x 5/16 SPROKET Tooth radius r 3 13 Radius width 1,3 Tooth width B 1 7,2 De d1 Dm HIN 12,7 Internal width 7,75 Roller ø 8,51 B1 D m d ,00 33, ,06 QPS08B ,00 37, ,09 QPS08B ,20 41, ,12 QPS08B ,70 45, ,15 QPS08B ,00 49, ,21 QPS08B ,40 53, ,26 QPS08B ,80 57, ,32 QPS08B ,50 61, ,38 QPS08B ,50 65, ,46 QPS08B ,60 69, ,51 QPS08B ,80 73, ,59 QPS08B ,70 77, ,67 QPS08B ,80 81, ,76 QPS08B ,70 85, ,85 QPS08B ,80 89, ,91 QPS08B ,20 93, ,95 QPS08B ,80 97, ,98 QPS08B ,80 101, ,01 QPS08B ,00 105, ,09 QPS08B ,00 109, ,13 QPS08B ,00 113, ,17 QPS08B ,00 117, ,42 QPS08B ,10 121, ,46 QPS08B ,20 125, ,74 QPS08B ,30 129, ,78 QPS08B ,40 133, ,83 QPS08B ,60 137, ,88 QPS08B ,70 141, ,93 QPS08B ,00 145, ,22 QPS08B ,60 149, ,27 QPS08B ,60 153, ,32 QPS08B ,70 157, ,38 QPS08B ,80 161, ,43 QPS08B ,00 182,07 * ,00 QPS08B ,30 202,26 * ,40 QPS08B ,40 230,54 * ,85 QPS08B ,30 307,32 * ,56 QPS08B ,10 384,11 * ,56 QPS08B ,90 460,91 * ,56 QPS08B1-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 20

23 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 10B-1 5/8 x 3/8 SPROKET Tooth radius r 3 16 Radius width 1,6 Tooth width B 1 9,1 HIN 15,875 Internal width 9,65 Roller ø 10,16 De B1 d1 Dm Simplex Sprockets D m d ,00 41, ,12 QPS10B ,60 46, ,16 QPS10B ,50 51, ,22 QPS10B ,00 56, ,29 QPS10B ,00 61, ,37 QPS10B ,00 66, ,46 QPS10B ,00 71, ,56 QPS10B ,00 76, ,67 QPS10B ,00 81, ,76 QPS10B ,00 86, ,88 QPS10B ,30 91, ,01 QPS10B ,30 96, ,15 QPS10B ,40 101, ,21 QPS10B ,40 106, ,35 QPS10B ,00 111, ,41 QPS10B ,50 116, ,47 QPS10B ,30 121, ,54 QPS10B ,00 126, ,60 QPS10B ,00 131, ,96 QPS10B ,00 136, ,04 QPS10B ,70 141, ,25 QPS10B ,80 146, ,33 QPS10B ,80 151, ,41 QPS10B ,90 156, ,64 QPS10B ,90 161, ,73 QPS10B ,50 167, ,82 QPS10B ,00 172, ,92 QPS10B ,10 177, ,01 QPS10B ,10 182, ,27 QPS10B ,20 187, ,37 QPS10B ,20 192, ,47 QPS10B ,20 197, ,58 QPS10B ,30 202, ,69 QPS10B ,00 227,58 * ,09 QPS10B ,30 252,82 * ,80 QPS10B ,00 288,18 * ,66 QPS10B ,10 384,15 * ,28 QPS10B ,50 480,14 * ,36 QPS10B ,10 576,13 * ,44 QPS10B1-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 21

24 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 12B-1 3/4 x 7/16 SPROKET Tooth radius r 3 19 Radius width 2 Tooth width B 1 11,1 De d1 Dm HIN 19,05 Internal width 11,68 Roller ø 12,07 B1 D m d 1 odice 8 57,30 49, ,21 QPS12B ,00 55, ,29 QPS12B ,00 61, ,38 QPS12B ,00 67, ,51 QPS12B ,50 73, ,65 QPS12B ,50 79, ,80 QPS12B ,60 85, ,97 QPS12B ,80 91, ,16 QPS12B ,50 97, ,34 QPS12B ,50 103, ,53 QPS12B ,00 109, ,62 QPS12B ,20 115, ,70 QPS12B ,70 121, ,80 QPS12B ,00 127, ,35 QPS12B ,00 133, ,46 QPS12B ,00 139, ,56 QPS12B ,90 145, ,68 QPS12B ,00 152, ,80 QPS12B ,90 158, ,08 QPS12B ,30 164, ,21 QPS12B ,00 170, ,34 QPS12B ,10 176, ,48 QPS12B ,50 182, ,63 QPS12B ,30 188, ,78 QPS12B ,30 194, ,93 QPS12B ,30 200, ,09 QPS12B ,60 206, ,25 QPS12B ,00 212, ,42 QPS12B ,80 218, ,71 QPS12B ,90 224, ,89 QPS12B ,00 230, ,07 QPS12B ,10 236, ,26 QPS12B ,30 242, ,46 QPS12B ,50 273,09 * ,85 QPS12B ,30 303,39 * ,00 QPS12B ,40 345,81 * ,85 QPS12B ,90 460,98 * ,02 QPS12B ,10 576,17 * ,45 QPS12B ,60 691,36 * ,88 QPS12B1-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 22

25 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 16B-1 1 x 17,02 mm SPROKET Tooth radius r 3 26 Radius width 2,5 Tooth width B 1 16,2 HIN 25,4 Internal width 17,02 Roller ø 15,88 De B1 d1 Dm Simplex Sprockets D m d 1 odice 8 77,00 66, ,47 QPS16B ,00 74, ,66 QPS16B ,00 82, ,83 QPS16B ,50 90, ,14 QPS16B ,00 98, ,43 QPS16B ,00 106, ,77 QPS16B ,00 114, ,08 QPS16B ,00 122, ,46 QPS16B ,00 130, ,14 QPS16B ,00 138, ,33 QPS16B ,00 146, ,56 QPS16B ,20 154, ,78 QPS16B ,20 162, ,03 QPS16B ,20 170, ,01 QPS16B ,30 178, ,28 QPS16B ,50 186, ,56 QPS16B ,50 194, ,86 QPS16B ,50 202, ,16 QPS16B ,60 210, ,96 QPS16B ,60 218, ,30 QPS16B ,70 226, ,64 QPS16B ,80 234, ,00 QPS16B ,00 243, ,38 QPS16B ,00 251,08 * ,69 QPS16B ,00 259,13 * ,09 QPS16B ,50 267,21 * ,50 QPS16B ,00 275,28 * ,93 QPS16B ,20 283,36 * ,36 QPS16B ,60 291,44 * ,81 QPS16B ,60 299,51 * ,28 QPS16B ,70 307,59 * ,76 QPS16B ,80 315,67 * ,25 QPS16B ,90 323,75 * ,75 QPS16B ,10 364,12 * ,15 QPS16B ,40 404,52 * ,00 QPS16B ,00 461,08 * ,52 QPS16B ,00 614,64 * ,97 QPS16B ,10 768,22 * ,92 QPS16B ,30 921,81 * ,87 QPS16B1-114 Material: 45 (Fe360B with 31) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 23

26 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 20B-1 1 1/4 x 3/4 SPROKET Tooth radius r 3 32 Radius width 3,5 Tooth width B 1 18,5 De d1 Dm HIN 31,75 Internal width 19,56 Roller ø 19,05 B1 D m d ,10 82, ,85 QPS20B ,00 92, ,19 QPS20B ,90 102, ,51 QPS20B ,80 112, ,04 QPS20B ,80 122, ,58 QPS20B ,80 132, ,15 QPS20B ,80 142, ,78 QPS20B ,90 152, ,47 QPS20B ,90 162, ,25 QPS20B ,90 172, ,61 QPS20B ,00 182, ,00 QPS20B ,10 192, ,40 QPS20B ,10 202, ,84 QPS20B ,20 213, ,79 QPS20B ,30 223, ,27 QPS20B ,30 233, ,77 QPS20B ,40 243, ,30 QPS20B ,50 253, ,85 QPS20B ,60 263,40 * ,07 QPS20B ,60 273,49 * ,67 QPS20B ,70 283,56 * ,29 QPS20B ,80 293,65 * ,93 QPS20B ,90 303,75 * ,60 QPS20B ,00 313,85 * ,28 QPS20B ,10 323,91 * ,00 QPS20B ,20 334,01 * ,73 QPS20B ,30 344,10 * ,49 QPS20B ,40 354,20 * ,27 QPS20B ,50 364,30 * ,08 QPS20B ,50 374,39 * ,91 QPS20B ,60 384,49 * ,76 QPS20B ,70 394, ,73 QPS20B ,80 404,69 * ,53 QPS20B ,30 455,17 * ,79 QPS20B ,80 505,65 * ,00 QPS20B ,50 576,35 * ,79 QPS20B ,50 768,32 * ,81 QPS20B1-076 Material: 45 (Fe360B with 26) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 24

27 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 24B-1 1 1/2 x 1 SPROKET Tooth radius r 3 38 Radius width 4 Tooth width B 1 24,1 HIN 38,1 Internal width 25,4 Roller ø 25,4 De B1 d1 Dm Simplex Sprockets D m d ,00 99, ,38 QPS24B ,40 111, ,90 QPS24B ,00 123, ,47 QPS24B ,00 135, ,27 QPS24B ,00 147, ,09 QPS24B ,20 159, ,00 QPS24B ,20 171, ,09 QPS24B ,20 183, ,84 QPS24B ,30 195,30 * ,20 QPS24B ,30 207,34 * ,87 QPS24B ,30 219,42 * ,59 QPS24B ,50 231,49 * ,36 QPS24B ,60 243,57 * ,16 QPS24B ,60 255,65 * ,35 QPS24B ,70 267,73 * ,24 QPS24B ,80 279,80 * ,18 QPS24B ,80 291,88 * ,16 QPS24B ,00 304,00 * ,19 QPS24B ,00 316,08 * ,25 QPS24B ,20 328,19 * ,37 QPS24B ,20 340,27 * ,52 QPS24B ,30 352,38 * ,72 QPS24B ,50 364,50 * ,97 QPS24B ,60 376,62 * ,25 QPS24B ,70 388,69 * ,59 QPS24B ,80 400,81 * ,96 QPS24B ,80 412,93 * ,38 QPS24B ,00 425,04 * ,84 QPS24B ,00 437,16 * ,34 QPS24B ,20 449,27 * ,90 QPS24B ,20 461,39 * ,49 QPS24B ,50 473,50 * ,15 QPS24B ,60 485,62 * ,81 QPS24B ,20 546,19 * ,08 QPS24B ,70 606,78 * ,00 QPS24B ,50 691,63 * ,28 QPS24B1-057 Material: 45 (Fe360B with 16) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 25

28 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 28B-1 1 3/4 x 1 1/4 SPROKET Tooth radius r 3 44 Radius width 5 Tooth width B 1 29,4 De d1 Dm HIN 44,45 Internal width 30,99 Roller ø 27,94 B1 D m d ,00 116, ,86 QPS28B ,40 129, ,00 QPS28B ,30 143, ,18 QPS28B ,30 157, ,51 QPS28B ,50 171, ,04 QPS28B ,20 185,74 * ,88 QPS28B ,20 199,76 * ,79 QPS28B ,30 213,79 * ,77 QPS28B ,30 227,84 * ,96 QPS28B ,00 241,91 * ,09 QPS28B ,00 255,98 * ,28 QPS28B ,00 270,06 * ,56 QPS28B ,00 284,15 * ,90 QPS28B ,00 298,24 * ,31 QPS28B ,00 312,34 * ,80 QPS28B ,00 326,44 * ,36 QPS28B ,00 340,55 * ,00 QPS28B ,00 354,66 * ,70 QPS28B ,00 368,77 * ,48 QPS28B ,40 382,88 * ,36 QPS28B ,00 397,00 * ,26 QPS28B ,00 411,12 * ,30 QPS28B ,00 425,24 * ,33 QPS28B ,00 439,37 * ,46 QPS28B ,00 453,49 * ,59 QPS28B ,00 467,62 * ,92 QPS28B ,00 481,75 * ,24 QPS28B ,00 495,88 * ,57 QPS28B ,00 510,01 * ,18 QPS28B ,00 524,14 * ,79 QPS28B ,00 538,27 * ,40 QPS28B ,00 552,40 * ,16 QPS28B ,00 566,54 * ,92 QPS28B1-040 Material: 45 (Fe360B with 13) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 26

29 Simplex Sprocket for chain according to DIN ISO/R 606 ISO 32B-1 2 x 1 1/4 SPROKET Tooth radius r 3 51 Radius width 6 Tooth width B 1 29,4 HIN 50,8 Internal width 30,99 Roller ø 29,21 De B1 d1 Dm Simplex Sprockets D m d ,00 132, ,20 QPS32B ,00 148, ,78 QPS32B ,00 164, ,60 QPS32B ,80 180, ,26 QPS32B ,80 196,29 * ,91 QPS32B ,80 212,29 * ,05 QPS32B ,80 228,29 * ,25 QPS32B ,80 244,30 * ,53 QPS32B ,90 260,40 * ,87 QPS32B ,90 276,40 * ,35 QPS32B ,00 292,55 * ,92 QPS32B ,10 308,66 * ,53 QPS32B ,20 324,71 * ,50 QPS32B ,30 340,82 * ,36 QPS32B ,50 356,98 * ,31 QPS32B ,60 373,08 * ,36 QPS32B ,70 389,18 * ,50 QPS32B ,80 405,33 * ,74 QPS32B ,90 421,44 * ,07 QPS32B ,10 437,59 * ,54 QPS32B ,20 453,69 * ,01 QPS32B ,40 469,90 * ,68 QPS32B ,50 486,00 * ,34 QPS32B ,80 518,26 * ,89 QPS32B ,50 566,72 * ,16 QPS32B ,50 615,14 * ,28 QPS32B ,30 647,49 * ,50 QPS32B1-040 Material: 45 (Fe360B with 12) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 27

30 DUPLEX SPROKETS Duplex Sprocket for chain according to DIN ISO/R 606 ISO 05B-2 8 x 3 mm SPROKET Tooth radius r 3 8 Radius width 1 Tooth width b 1 2,7 Tooth width B 2 8,3 De d2 Dm HIN 8 Internal width 3 Roller ø 5 b1 B2 D m d ,00 20, ,02 QPD05B ,60 23, ,03 QPD05B ,20 25, ,03 QPD05B ,70 28, ,04 QPD05B ,20 30, ,05 QPD05B ,70 33, ,07 QPD05B ,20 35, ,08 QPD05B ,70 38, ,10 QPD05B ,30 41, ,13 QPD05B ,80 43, ,15 QPD05B ,30 46, ,17 QPD05B ,90 48, ,20 QPD05B ,40 51, ,21 QPD05B ,00 53, ,25 QPD05B ,50 56, ,26 QPD05B ,00 58, ,28 QPD05B ,60 61, ,23 QPD05B ,50 63, ,31 QPD05B ,50 66, ,38 QPD05B ,20 68, ,40 QPD05B ,80 71, ,42 QPD05B ,30 73, ,44 QPD05B ,80 76, ,45 QPD05B ,40 79, ,52 QPD05B ,90 81, ,59 QPD05B ,50 84, ,61 QPD05B ,00 86, ,63 QPD05B ,50 89, ,65 QPD05B ,00 91, ,67 QPD05B ,60 94, ,69 QPD05B ,20 96, ,72 QPD05B ,70 99, ,75 QPD05B ,30 101, ,77 QPD05B2-040 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 28

31 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 06B-2 3/8 x 7/32 SPROKET Tooth radius r 3 10 Radius width 1 Tooth width b 1 5,2 Tooth width B 2 15,4 HIN 9,525 Internal width 5,72 Roller ø 6,35 De b1 B2 d2 Dm Duplex Sprockets D m d ,00 24, ,04 QPD06B ,00 27, ,05 QPD06B ,00 30, ,07 QPD06B ,00 33, ,10 QPD06B ,00 36, ,13 QPD06B ,00 39, ,16 QPD06B ,30 42, ,20 QPD06B ,30 45, ,24 QPD06B ,30 48, ,27 QPD06B ,30 51, ,32 QPD06B ,30 54, ,38 QPD06B ,30 57, ,42 QPD06B ,30 60, ,48 QPD06B ,00 63, ,52 QPD06B ,00 66, ,58 QPD06B ,50 69, ,64 QPD06B ,00 72, ,71 QPD06B ,00 76, ,79 QPD06B ,00 79, ,87 QPD06B ,00 82, ,94 QPD06B ,00 85, ,03 QPD06B ,00 88, ,11 QPD06B ,70 91, ,20 QPD06B ,30 94, ,27 QPD06B ,30 97, ,32 QPD06B ,30 100, ,37 QPD06B ,30 103, ,43 QPD06B ,40 106, ,49 QPD06B ,40 109, ,70 QPD06B ,40 112, ,76 QPD06B ,50 115, ,81 QPD06B ,50 118, ,88 QPD06B ,50 121, ,95 QPD06B ,70 136,55 * ,15 QPD06B ,70 151,69 * ,50 QPD06B ,90 172,91 * ,16 QPD06B ,90 230,49 * ,23 QPD06B ,50 288,08 * ,76 QPD06B ,50 345,68 * ,29 QPD06B2-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 29

32 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 08B-2 1/2 x 5/16 SPROKET Tooth radius r 3 13 Radius width 1,3 Tooth width b 1 7 Tooth width B 2 21 De d2 Dm HIN 12,7 Internal width 7,75 Roller ø 8,51 b1 B2 D m d ,00 33, ,09 QPD08B ,00 37, ,13 QPD08B ,20 41, ,18 QPD08B ,70 45, ,24 QPD08B ,00 49, ,30 QPD08B ,40 53, ,36 QPD08B ,80 57, ,44 QPD08B ,50 61, ,52 QPD08B ,50 65, ,63 QPD08B ,60 69, ,73 QPD08B ,80 73, ,85 QPD08B ,70 77, ,97 QPD08B ,80 81, ,10 QPD08B ,70 85, ,29 QPD08B ,80 89, ,37 QPD08B ,20 93, ,46 QPD08B ,80 97, ,64 QPD08B ,80 101, ,82 QPD08B ,00 105, ,02 QPD08B ,00 109, ,12 QPD08B ,00 113, ,34 QPD08B ,00 117, ,56 QPD08B ,10 121, ,79 QPD08B ,20 125, ,87 QPD08B ,30 129, ,00 QPD08B ,40 133, ,13 QPD08B ,60 137, ,26 QPD08B ,70 141, ,40 QPD08B ,00 145, ,54 QPD08B ,60 149, ,69 QPD08B ,60 153, ,84 QPD08B ,70 157, ,00 QPD08B ,80 161, ,15 QPD08B ,00 182,07 * ,26 QPD08B ,30 202,26 * ,30 QPD08B ,40 230,54 * ,65 QPD08B ,30 307,32 * ,30 QPD08B ,10 384,11 * ,13 QPD08B ,90 460,91 * ,96 QPD08B2-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 30

33 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 10B-2 5/8 x 3/8 SPROKET Tooth radius r 3 16 Radius width 1,6 Tooth width b 1 9 Tooth width B 2 25,5 HIN 15,875 Internal width 9,65 Roller ø 10,16 De b1 B2 d2 Dm Duplex Sprockets D m d ,00 41, ,19 QPD10B ,60 46, ,27 QPD10B ,50 51, ,36 QPD10B ,00 56, ,43 QPD10B ,00 61, ,55 QPD10B ,00 66, ,68 QPD10B ,00 71, ,82 QPD10B ,00 76, ,97 QPD10B ,00 81, ,26 QPD10B ,00 86, ,46 QPD10B ,30 91, ,67 QPD10B ,30 96, ,90 QPD10B ,40 101, ,14 QPD10B ,40 106, ,27 QPD10B ,00 111, ,54 QPD10B ,50 116, ,82 QPD10B ,30 121, ,11 QPD10B ,00 126, ,15 QPD10B ,00 131, ,74 QPD10B ,00 136, ,94 QPD10B ,70 141, ,28 QPD10B ,80 146, ,50 QPD10B ,80 151, ,87 QPD10B ,90 156, ,10 QPD10B ,90 161, ,34 QPD10B ,50 167, ,59 QPD10B ,00 172, ,84 QPD10B ,10 177, ,11 QPD10B ,10 182, ,38 QPD10B ,20 187, ,66 QPD10B ,20 192, ,95 QPD10B ,20 197, ,25 QPD10B ,30 202, ,55 QPD10B ,00 227,58 * ,32 QPD10B ,30 252,82 * ,00 QPD10B ,00 288,18 * ,74 QPD10B ,10 384,15 * ,93 QPD10B ,50 480,14 * ,90 QPD10B2-095 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 31

34 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 12B-2 3/4 x 7/16 SPROKET Tooth radius r 3 19 Radius width 2 Tooth width b 1 10,8 Tooth width B 2 30,3 De d2 Dm HIN 19,05 Internal width 11,68 Roller ø 12,07 b1 B2 D m d ,30 49, ,31 QPD12B ,00 55, ,44 QPD12B ,00 61, ,59 QPD12B ,00 67, ,81 QPD12B ,50 73, ,02 QPD12B ,50 79, ,25 QPD12B ,60 85, ,46 QPD12B ,80 91, ,74 QPD12B ,50 97, ,03 QPD12B ,50 103, ,36 QPD12B ,00 109, ,70 QPD12B ,20 115, ,07 QPD12B ,70 121, ,43 QPD12B ,00 127, ,69 QPD12B ,00 133, ,97 QPD12B ,00 139, ,51 QPD12B ,90 145, ,81 QPD12B ,00 152, ,41 QPD12B ,90 158, ,73 QPD12B ,30 164, ,08 QPD12B ,00 170, ,43 QPD12B ,10 176, ,80 QPD12B ,50 182, ,19 QPD12B ,30 188, ,59 QPD12B ,30 194, ,00 QPD12B ,30 200, ,42 QPD12B ,60 206, ,86 QPD12B ,00 212, ,31 QPD12B ,80 218, ,71 QPD12B ,90 224, ,19 QPD12B ,00 230, ,78 QPD12B ,10 236, ,19 QPD12B ,30 242, ,71 QPD12B ,50 273,09 * ,35 QPD12B ,30 303,39 * ,00 QPD12B ,40 345,81 * ,43 QPD12B ,90 460,98 * ,88 QPD12B ,10 576,17 * ,79 QPD12B ,60 691,36 * ,70 QPD12B2-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 32

35 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 16B-2 1 x 17,02 mm SPROKET Tooth radius r 3 26 Radius width 2,5 Tooth width b 1 15,8 Tooth width B 2 47,7 HIN 25,4 Internal width 17,02 Roller ø 15,88 De b1 B2 d2 Dm Duplex Sprockets D m d ,00 66, ,81 QPD16B ,00 74, ,15 QPD16B ,00 82, ,52 QPD16B ,50 90, ,08 QPD16B ,00 98, ,60 QPD16B ,00 106, ,18 QPD16B ,00 114, ,82 QPD16B ,00 122, ,51 QPD16B ,00 130, ,17 QPD16B ,00 138, ,98 QPD16B ,00 146, ,84 QPD16B ,20 154, ,76 QPD16B ,20 162, ,52 QPD16B ,20 170, ,24 QPD16B ,30 178,48 * ,00 QPD16B ,50 186,53 * ,80 QPD16B ,50 194,59 * ,64 QPD16B ,50 202,66 * ,52 QPD16B ,60 210,72 * ,43 QPD16B ,60 218,79 * ,38 QPD16B ,70 226,85 * ,38 QPD16B ,80 234,92 * ,41 QPD16B ,00 243,00 * ,48 QPD16B ,00 251,08 * ,96 QPD16B ,00 259,13 * ,10 QPD16B ,50 267,21 * ,29 QPD16B ,00 275,28 * ,21 QPD16B ,20 283,36 * ,77 QPD16B ,60 291,44 * ,07 QPD16B ,60 299,51 * ,41 QPD16B ,70 307,59 * ,79 QPD16B ,80 315,67 * ,20 QPD16B ,90 323,75 * ,65 QPD16B ,10 364,12 * ,44 QPD16B ,40 404,52 * ,00 QPD16B ,00 461,08 * ,45 QPD16B ,00 614,64 * ,79 QPD16B ,10 768,22 * ,48 QPD16B ,30 921,81 * ,17 QPD16B2-114 Material: 45 (Fe360B with 22) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 33

36 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 20B-2 1 1/4 x 3/4 SPROKET Tooth radius r 3 32 Radius width 3,5 Tooth width b 1 18,2 Tooth width B 2 54,6 De d2 Dm HIN 31,75 Internal width 19,56 Roller ø 19,05 b1 B2 D m d ,10 82, ,58 QPD20B ,00 92, ,19 QPD20B ,90 102, ,85 QPD20B ,80 112, ,72 QPD20B ,80 122, ,66 QPD20B ,80 132, ,70 QPD20B ,80 142, ,84 QPD20B ,90 152, ,08 QPD20B ,90 162, ,90 QPD20B ,90 172, ,92 QPD20B ,00 182,85 * ,00 QPD20B ,10 192,91 * ,16 QPD20B ,10 202,98 * ,38 QPD20B ,20 213,04 * ,49 QPD20B ,30 223,11 * ,86 QPD20B ,30 233,17 * ,29 QPD20B ,40 243,23 * ,79 QPD20B ,50 253,33 * ,36 QPD20B ,60 263,40 * ,45 QPD20B ,60 273,49 * ,15 QPD20B ,70 283,56 * ,93 QPD20B ,80 293,65 * ,77 QPD20B ,90 303,75 * ,69 QPD20B ,00 313,85 * ,67 QPD20B ,10 323,91 * ,72 QPD20B ,20 334,01 * ,88 QPD20B ,30 344,10 * ,03 QPD20B ,40 354,20 * ,28 QPD20B ,50 364,30 * ,61 QPD20B ,50 374,39 * ,04 QPD20B ,60 384,49 * ,46 QPD20B ,70 394,59 * ,03 QPD20B ,80 404,69 * ,60 QPD20B ,30 455,17 * ,32 QPD20B ,50 768,32 * ,96 QPD20B2-076 Material: 45 (Fe360B with 18) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 34

37 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 24B-2 1 1/2 x 1 SPROKET Tooth radius r 3 38 Radius width 4 Tooth width b 1 23,6 Tooth width B 2 72 HIN 38,1 Internal width 25,4 Roller ø 25,4 De b1 B2 d2 Dm Duplex Sprockets D m d ,00 99, ,70 QPD24B ,40 111, ,79 QPD24B ,00 123, ,01 QPD24B ,00 135, ,62 QPD24B ,00 147, ,28 QPD24B ,20 159, ,13 QPD24B ,20 171, ,24 QPD24B ,20 183, ,08 QPD24B ,30 195,30 * ,88 QPD24B ,30 207,34 * ,80 QPD24B ,30 219,42 * ,08 QPD24B ,50 231,49 * ,26 QPD24B ,60 243,57 * ,57 QPD24B ,60 255,65 * ,01 QPD24B ,70 267,73 * ,59 QPD24B ,80 279,80 * ,29 QPD24B ,80 291,88 * ,13 QPD24B ,00 304,00 * ,09 QPD24B ,00 316,08 * ,19 QPD24B ,20 328,19 * ,41 QPD24B ,20 340,27 * ,77 QPD24B ,30 352,38 * ,26 QPD24B ,50 364,50 * ,88 QPD24B ,60 376,62 * ,19 QPD24B ,70 388,69 * ,07 QPD24B ,80 400,81 * ,08 QPD24B ,80 412,93 * ,21 QPD24B ,00 425,04 * ,49 QPD24B ,00 437,16 * ,89 QPD24B ,20 449,27 * ,43 QPD24B ,20 461,39 * ,09 QPD24B ,50 473,50 * ,95 QPD24B ,60 485,62 * ,80 QPD24B2-040 Material: 45 (Fe360B with 16) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 35

38 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 28B-2 1 3/4 x 1 1/4 SPROKET Tooth radius r 3 44 Radius width 5 Tooth width b 1 28,8 Tooth width B 2 88,4 De d2 Dm HIN 44,45 Internal width 30,99 Roller ø 27,94 b1 B2 D m d ,00 116, ,75 QPD28B ,40 129, ,66 QPD28B ,30 143, ,79 QPD28B ,30 157, ,19 QPD28B ,50 171, ,91 QPD28B ,20 185,74 * ,25 QPD28B ,20 199,76 * ,81 QPD28B ,30 213,79 * ,64 QPD28B ,30 227,84 * ,52 QPD28B ,00 241,91 * ,74 QPD28B ,00 255,98 * ,17 QPD28B ,00 270,06 * ,14 QPD28B ,00 284,15 * ,02 QPD28B ,00 298,24 * ,10 QPD28B ,00 312,34 * ,40 QPD28B ,00 326,44 * ,92 QPD28B ,00 340,55 * ,77 QPD28B ,00 354,66 * ,62 QPD28B ,00 368,77 * ,28 QPD28B ,40 382,88 * ,78 QPD28B ,00 397,00 * ,28 QPD28B ,00 411,12 * ,23 QPD28B ,00 425,24 * ,17 QPD28B ,00 439,37 * ,67 QPD28B ,00 495,88 * ,17 QPD28B ,00 538,27 * ,90 QPD28B ,00 566,54 * ,15 QPD28B2-040 Material: 45 (Fe360B with 13) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 36

39 Duplex Sprocket for chain according to DIN ISO/R 606 ISO 32B-2 2 x 1 1/4 SPROKET Tooth radius r 3 51 Radius width 6 Tooth width b 1 28,8 Tooth width B 2 87,4 HIN 50,8 Internal width 30,99 Roller ø 29,21 De b1 B2 d2 Dm Duplex Sprockets D m d ,00 132, ,65 QPD32B ,00 148, ,14 QPD32B ,00 164, ,01 QPD32B ,80 180, ,75 QPD32B ,80 196,29 * ,95 QPD32B ,80 212,29 * ,68 QPD32B ,80 228,29 * ,03 QPD32B ,80 244,30 * ,30 QPD32B ,90 260,40 * ,21 QPD32B ,90 276,40 * ,76 QPD32B ,00 292,55 * ,24 QPD32B ,10 308,66 * ,52 QPD32B ,20 324,71 * ,56 QPD32B ,30 340,82 * ,87 QPD32B ,50 356,98 * ,47 QPD32B ,60 373,08 * ,35 QPD32B ,70 389,18 * ,52 QPD32B ,80 405,33 * ,66 QPD32B ,90 421,44 * ,69 QPD32B ,10 437,59 * ,84 QPD32B ,20 453,69 * ,99 QPD32B ,50 486,00 * ,41 QPD32B2-030 Material: 45 (Fe360B with 12) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 37

40 TRIPLEX SPROKETS Triplex Sprocket for chain according to DIN ISO/R 606 ISO 06B-3 3/8 x 7/32 SPROKET Tooth radius r 3 10 Radius width 1 Tooth width b 1 5,2 Tooth width B 3 25,6 HIN 9,525 Internal width 5,72 Roller ø 6,35 D m d ,00 24, ,05 QPT06B ,00 27, ,07 QPT06B ,00 30, ,09 QPT06B ,00 33, ,11 QPT06B ,00 36, ,15 QPT06B ,00 39, ,19 QPT06B ,30 42, ,23 QPT06B ,30 45, ,28 QPT06B ,30 48, ,33 QPT06B ,30 51, ,39 QPT06B ,30 54, ,45 QPT06B ,30 57, ,51 QPT06B ,30 60, ,58 QPT06B ,00 63, ,70 QPT06B ,00 66, ,78 QPT06B ,50 69, ,87 QPT06B ,00 72, ,97 QPT06B ,00 76, ,06 QPT06B ,00 79, ,17 QPT06B ,00 82, ,27 QPT06B ,00 85, ,39 QPT06B ,00 88, ,50 QPT06B ,70 91, ,62 QPT06B ,30 94, ,72 QPT06B ,30 97, ,80 QPT06B ,30 100, ,89 QPT06B ,30 103, ,06 QPT06B ,40 106, ,15 QPT06B ,40 109, ,33 QPT06B ,40 112, ,43 QPT06B ,50 115, ,53 QPT06B ,50 118, ,63 QPT06B ,50 121, ,74 QPT06B3-040 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 38

41 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 08B-3 1/2 x 5/16 SPROKET Tooth radius r 3 13 Radius width 1,3 Tooth width b 1 7 Tooth width B 3 34,9 HIN 12,7 Internal width 7,75 Roller ø 8,51 De b1 B3 d3 Dm Triplex Sprockets D m d ,00 33, ,13 QPT08B ,00 37, ,18 QPT08B ,20 41, ,24 QPT08B ,70 45, ,31 QPT08B ,00 49, ,39 QPT08B ,40 53, ,49 QPT08B ,80 57, ,60 QPT08B ,50 61, ,72 QPT08B ,50 65, ,85 QPT08B ,60 69, ,99 QPT08B ,80 73, ,14 QPT08B ,70 77, ,30 QPT08B ,80 81, ,47 QPT08B ,70 85, ,79 QPT08B ,80 89, ,93 QPT08B ,20 93, ,08 QPT08B ,80 97, ,32 QPT08B ,80 101, ,57 QPT08B ,00 105, ,79 QPT08B ,00 109, ,96 QPT08B ,00 113, ,25 QPT08B ,00 117, ,55 QPT08B ,10 121, ,86 QPT08B ,20 125, ,32 QPT08B ,30 129, ,53 QPT08B ,40 133, ,74 QPT08B ,60 137, ,97 QPT08B ,70 141, ,20 QPT08B ,00 145, ,64 QPT08B ,60 149, ,88 QPT08B ,60 153, ,14 QPT08B ,70 157, ,40 QPT08B ,80 161, ,66 QPT08B3-040 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 39

42 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 10B-3 5/8 x 3/8 SPROKET Tooth radius r 3 16 Radius width 1,6 Tooth width b 1 9 Tooth width B 3 42,1 HIN 15,875 Internal width 9,65 Roller ø 10,16 D m d ,00 41, ,27 QPT10B ,60 46, ,38 QPT10B ,50 51, ,47 QPT10B ,00 56, ,61 QPT10B ,00 61, ,78 QPT10B ,00 66, ,96 QPT10B ,00 71, ,15 QPT10B ,00 76, ,37 QPT10B ,00 81, ,72 QPT10B ,00 86, ,99 QPT10B ,30 91, ,27 QPT10B ,30 96, ,58 QPT10B ,40 101, ,91 QPT10B ,40 106, ,12 QPT10B ,00 111, ,48 QPT10B ,50 116, ,86 QPT10B ,30 121, ,25 QPT10B ,00 126, ,67 QPT10B ,00 131, ,10 QPT10B ,00 136, ,43 QPT10B ,70 141, ,90 QPT10B ,80 146, ,25 QPT10B ,80 151, ,65 QPT10B ,90 156, ,18 QPT10B ,90 161, ,56 QPT10B ,50 167, ,97 QPT10B ,00 172, ,36 QPT10B ,10 177, ,74 QPT10B ,10 182, ,15 QPT10B ,20 187, ,61 QPT10B ,20 192, ,08 QPT10B ,20 197, ,57 QPT10B ,30 202, ,07 QPT10B3-040 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 40

43 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 12B-3 3/4 x 7/16 SPROKET Tooth radius r 3 19 Radius width 2 Tooth width b 1 10,8 Tooth width B 3 49,8 HIN 19,05 Internal width 11,68 Roller ø 12,07 De b1 B3 d3 Dm Triplex Sprockets D m d ,30 49, ,45 QPT12B ,00 55, ,64 QPT12B ,00 61, ,86 QPT12B ,00 67, ,09 QPT12B ,50 73, ,39 QPT12B ,50 79, ,72 QPT12B ,60 85, ,08 QPT12B ,80 91, ,47 QPT12B ,50 97, ,89 QPT12B ,50 103, ,34 QPT12B ,00 109, ,83 QPT12B ,20 115, ,35 QPT12B ,70 121, ,87 QPT12B ,00 127, ,20 QPT12B ,00 133, ,65 QPT12B ,00 139, ,38 QPT12B ,90 145, ,87 QPT12B ,00 152, ,77 QPT12B ,90 158, ,21 QPT12B ,30 164, ,77 QPT12B ,00 170, ,35 QPT12B ,10 176, ,96 QPT12B ,50 182, ,59 QPT12B ,30 188, ,55 QPT12B ,30 194, ,22 QPT12B ,30 200, ,92 QPT12B ,60 206, ,64 QPT12B ,00 212, ,38 QPT12B ,80 218, ,14 QPT12B ,90 224, ,93 QPT12B ,00 230, ,73 QPT12B ,10 236, ,57 QPT12B ,30 242, ,42 QPT12B ,50 273,09 * ,55 QPT12B ,30 303,39 * ,00 QPT12B ,40 345,81 * ,16 QPT12B ,90 460,98 * ,41 QPT12B ,10 576,17 * ,37 QPT12B ,60 691,36 * ,33 QPT12B3-114 Material: 45 (Fe360B with 45) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 41

44 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 16B-3 1 x 17,02 mm SPROKET Tooth radius r 3 26 Radius width 2,5 Tooth width b 1 15,8 Tooth width B 3 79,6 HIN 25,4 Internal width 17,02 Roller ø 15,88 D m d ,00 66, ,19 QPT16B ,00 74, ,68 QPT16B ,00 82, ,24 QPT16B ,50 90, ,86 QPT16B ,00 98, ,62 QPT16B ,00 106, ,45 QPT16B ,00 114, ,37 QPT16B ,00 122, ,37 QPT16B ,00 130, ,45 QPT16B ,00 138, ,60 QPT16B ,00 146, ,84 QPT16B ,20 154, ,16 QPT16B ,20 162, ,36 QPT16B ,20 170,43 * ,56 QPT16B ,30 178,48 * ,82 QPT16B ,50 186,53 * ,15 QPT16B ,50 194,59 * ,53 QPT16B ,50 202,66 * ,99 QPT16B ,60 210,72 * ,34 QPT16B ,60 218,79 * ,92 QPT16B ,70 226,85 * ,57 QPT16B ,80 234,92 * ,27 QPT16B ,00 243,00 * ,05 QPT16B ,00 251,08 * ,23 QPT16B ,00 259,13 * ,13 QPT16B ,50 267,21 * ,10 QPT16B ,00 275,28 * ,13 QPT16B ,20 283,36 * ,23 QPT16B ,60 291,44 * ,39 QPT16B ,60 299,51 * ,65 QPT16B ,70 307,59 * ,90 QPT16B ,80 315,67 * ,29 QPT16B ,90 323,75 * ,67 QPT16B ,10 364,12 * ,94 QPT16B ,40 404,52 * ,00 QPT16B ,00 461,08 * ,03 QPT16B ,00 614,64 * ,86 QPT16B ,10 768,22 * ,85 QPT16B ,30 921,81 * ,84 QPT16B3-114 Material: 45 (Fe360B with 21) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 42

45 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 20B-3 1 1/4 x 3/4 SPROKET Tooth radius r 3 32 Radius width 3,5 Tooth width b 1 18,2 Tooth width B 3 91 HIN 31,75 Internal width 19,56 Roller ø 19,05 De b1 B3 d3 Dm Triplex Sprockets D m d ,10 82, ,15 QPT20B ,00 92, ,05 QPT20B ,90 102, ,04 QPT20B ,80 112, ,19 QPT20B ,80 122, ,55 QPT20B ,80 132, ,06 QPT20B ,80 142, ,71 QPT20B ,90 152, ,50 QPT20B ,90 162, ,06 QPT20B ,90 172, ,65 QPT20B ,00 182,85 * ,54 QPT20B ,10 192,91 * ,45 QPT20B ,10 202,98 * ,48 QPT20B ,20 213,04 * ,38 QPT20B ,30 223,11 * ,64 QPT20B ,30 233,17 * ,00 QPT20B ,40 243,23 * ,49 QPT20B ,50 253,33 * ,09 QPT20B ,60 263,40 * ,23 QPT20B ,60 273,49 * ,06 QPT20B ,70 283,56 * ,00 QPT20B ,80 293,65 * ,12 QPT20B ,90 303,75 * ,23 QPT20B ,00 313,85 * ,57 QPT20B ,10 323,91 * ,91 QPT20B ,20 334,01 * ,49 QPT20B ,30 344,10 * ,06 QPT20B ,40 354,20 * ,80 QPT20B ,50 364,30 * ,66 QPT20B ,50 374,39 * ,69 QPT20B ,60 384,49 * ,72 QPT20B ,70 394,59 * ,98 QPT20B ,80 404,69 * ,24 QPT20B3-040 Material: 45 (Fe360B with 18) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 43

46 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 24B-3 1 1/2 x 1 SPROKET Tooth radius r 3 38 Radius width 4 Tooth width b 1 23,6 Tooth width B 3 120,3 HIN 38,1 Internal width 25,4 Roller ø 25,4 D m d ,00 99, ,00 QPT24B ,40 111, ,62 QPT24B ,00 123, ,45 QPT24B ,00 135, ,73 QPT24B ,00 147, ,24 QPT24B ,20 159, ,02 QPT24B ,20 171, ,16 QPT24B ,20 183, ,09 QPT24B ,30 195,30 * ,25 QPT24B ,30 207,34 * ,42 QPT24B ,30 219,42 * ,12 QPT24B ,50 231,49 * ,74 QPT24B ,60 243,57 * ,57 QPT24B ,60 255,65 * ,98 QPT24B ,70 267,73 * ,25 QPT24B ,80 279,80 * ,74 QPT24B ,80 291,88 * ,44 QPT24B ,00 304,00 * ,37 QPT24B ,00 316,08 * ,52 QPT24B ,20 328,19 * ,88 QPT24B ,20 340,27 * ,46 QPT24B ,30 352,38 * ,37 QPT24B ,50 364,50 * ,28 QPT24B ,60 376,62 * ,63 QPT24B ,70 388,69 * ,97 QPT24B ,80 400,81 * ,86 QPT24B ,80 412,93 * ,75 QPT24B ,00 425,04 * ,64 QPT24B ,00 437,16 * ,19 QPT24B ,20 449,27 * ,73 QPT24B ,20 461,39 * ,28 QPT24B ,50 473,50 * ,37 QPT24B ,60 485,62 * ,46 QPT24B3-040 Material: 45 (Fe360B with 16) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 44

47 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 28B-3 1 3/4 x 1 1/4 SPROKET Tooth radius r 3 44 Radius width 5 Tooth width b 1 28,8 Tooth width B HIN 44,45 Internal width 30,99 Roller ø 27,94 De b1 B3 d3 Dm Triplex Sprockets D m d ,00 116, ,04 QPT28B ,40 129, ,89 QPT28B ,30 143, ,10 QPT28B ,30 157, ,73 QPT28B ,50 171, ,84 QPT28B ,20 185,74 * ,70 QPT28B ,20 199,76 * ,93 QPT28B ,30 213,79 * ,58 QPT28B ,30 227,84 * ,44 QPT28B ,00 241,91 * ,77 QPT28B ,00 255,98 * ,76 QPT28B ,00 270,06 * ,07 QPT28B ,00 284,15 * ,49 QPT28B ,00 298,24 * ,28 QPT28B ,00 312,34 * ,61 QPT28B ,00 326,44 * ,94 QPT28B ,00 340,55 * ,01 QPT28B ,00 354,66 * ,07 QPT28B ,00 368,77 * ,41 QPT28B ,40 382,88 * ,76 QPT28B ,00 397,00 * ,10 QPT28B ,00 411,12 * ,45 QPT28B ,00 425,24 * ,79 QPT28B ,00 439,37 * ,53 QPT28B ,00 495,88 * ,27 QPT28B ,00 538,27 * ,01 QPT28B ,00 566,54 * ,10 QPT28B3-040 Material: 45 (Fe360B with 13) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 45

48 Triplex Sprocket for chain according to DIN ISO/R 606 ISO 32B-3 2 x 1 1/4 SPROKET Tooth radius r 3 51 Radius width 6 Tooth width b 1 28,8 Tooth width B HIN 50,8 Internal width 30,99 Roller ø 29,21 D m d ,00 132, ,90 QPT32B ,00 148, ,65 QPT32B ,00 164, ,97 QPT32B ,80 180, ,22 QPT32B ,80 196,29 * ,23 QPT32B ,80 212,29 * ,98 QPT32B ,80 228,29 * ,50 QPT32B ,80 244,30 * ,04 QPT32B ,90 260,40 * ,50 QPT32B ,90 276,40 * ,45 QPT32B ,00 292,55 * ,85 QPT32B ,10 308,66 * ,73 QPT32B ,20 324,71 * ,07 QPT32B ,30 340,82 * ,89 QPT32B ,50 356,98 * ,41 QPT32B ,60 373,08 * ,93 QPT32B ,70 389,18 * ,40 QPT32B ,80 405,33 * ,86 QPT32B ,90 421,44 * ,00 QPT32B ,10 437,59 * ,14 QPT32B ,20 453,69 * ,28 QPT32B ,50 486,00 * ,42 QPT32B3-030 Material: 45 (Fe360B with 12) * = eld on hub External diameter mm diameter mm D m Hub diameter mm eight kg 46

49 3_Pignoni temprati EN_Pignoni temprati nuova scheda 20/01/ :22 Pagina 47 SPROKETS ITH FINISHED BORE Simplex sprockets with induction hardened teeth

50 3_Pignoni temprati EN_Pignoni temprati nuova scheda 20/01/ :22 Pagina 48 INDEX Simplex sprockets with hardened teeth Page Pignone semplice Technical data according to DIN ISO/R ISO 06B-1 3/8 x 7/ ISO 08B-1 1/2 x 5/ ISO 10B-1 5/8 x 3/ ISO 12B-1 3/4 x 7/ ISO 16B-1 1 x 17,02 mm 58-59

51 Simplex sprockets with induction hardened teeth, with finished bore, keyway and 2 set screws ccording to DIN ISO/R 606 d1 B M T Sprocket with finished bore Ø bore d 1 (H7) B (H9) T M ,8 (+0,10/0) M ,8 (+0,10/0) M ,8 (+0,10/0) M ,3 (+0,10/0) M ,3 (+0,10/0) M ,8 (+0,10/0) M ,8 (+0,10/0) M ,8 (+0,10/0) M ,8 (+0,10/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,3 (+0,20/0) M ,8 (+0,20/0) M ,8 (+0,20/0) M ,8 (+0,20/0) M ,4 (+0,20/0) M ,4 (+0,20/0) M ,9 (+0,20/0) M12 HR

52 Simplex sprockets with hardened teeth and finished bore ccording to DIN ISO/R 606 ISO 06B-1 3/8 x 7/32 SPROKET Tooth radius r 3 10 Radius width 1 Tooth width B 1 5,3 De d1 Dm De d1 Dm HIN 9,525 Internal width 5,72 Roller ø 6,35 B1 B1 Tipo = * D m d 1 D m d , ,08 QPF06B1-010F , ,09 QPF06B1-010F , ,10 QPF06B1-010F , ,10 QPF06B1-011F , ,11 QPF06B1-011F ,8 * ,12 QPF06B1-011F ,8 * ,12 QPF06B1-011F , ,11 QPF06B1-012F , ,11 QPF06B1-012F , ,13 QPF06B1-012F ,8 * ,13 QPF06B1-012F , ,14 QPF06B1-013F , ,13 QPF06B1-013F , ,13 QPF06B1-013F , ,14 QPF06B1-013F , ,14 QPF06B1-013F ,79 * ,16 QPF06B1-013F18 46,3 42, ,17 QPF06B1-014F12 46,3 42, ,16 QPF06B1-014F14 46,3 42, ,15 QPF06B1-014F16 46,3 42, ,17 QPF06B1-014F18 46,3 42, ,16 QPF06B1-014F19 49,3 45, ,20 QPF06B1-015F12 49,3 45, ,19 QPF06B1-015F14 49,3 45, ,19 QPF06B1-015F15 49,3 45, ,18 QPF06B1-015F16 49,3 45, ,17 QPF06B1-015F18 49,3 45, ,17 QPF06B1-015F19 49,3 45, ,18 QPF06B1-015F20 52,3 48, ,26 QPF06B1-016F12 52,3 48, ,25 QPF06B1-016F14 52,3 48, ,24 QPF06B1-016F15 52,3 48, ,24 QPF06B1-016F16 52,3 48, ,23 QPF06B1-016F18 52,3 48, ,22 QPF06B1-016F19 52,3 48, ,21 QPF06B1-016F20 52,3 48, ,20 QPF06B1-016F22 52,3 48, ,24 QPF06B1-016F24 52,3 48, ,23 QPF06B1-016F ,3 51, ,30 QPF06B1-017F12 55,3 51, ,29 QPF06B1-017F14 55,3 51, ,29 QPF06B1-017F15 55,3 51, ,28 QPF06B1-017F16 55,3 51, ,27 QPF06B1-017F18 55,3 51, ,26 QPF06B1-017F19 55,3 51, ,26 QPF06B1-017F20 55,3 51, ,24 QPF06B1-017F22 55,3 51, ,23 QPF06B1-017F24 55,3 51, ,24 QPF06B1-017F25 58,3 54, ,35 QPF06B1-018F12 58,3 54, ,34 QPF06B1-018F14 58,3 54, ,33 QPF06B1-018F15 58,3 54, ,33 QPF06B1-018F16 58,3 54, ,32 QPF06B1-018F18 58,3 54, ,31 QPF06B1-018F19 58,3 54, ,30 QPF06B1-018F20 58,3 54, ,29 QPF06B1-018F22 58,3 54, ,27 QPF06B1-018F24 58,3 54, ,26 QPF06B1-018F25 61,3 57, ,38 QPF06B1-019F12 61,3 57, ,37 QPF06B1-019F14 61,3 57, ,37 QPF06B1-019F15 61,3 57, ,36 QPF06B1-019F16 61,3 57, ,35 QPF06B1-019F18 61,3 57, ,35 QPF06B1-019F19 61,3 57, ,34 QPF06B1-019F20 61,3 57, ,32 QPF06B1-019F22 61,3 57, ,31 QPF06B1-019F24 61,3 57, ,30 QPF06B1-019F25 64,3 60, ,41 QPF06B1-020F12 64,3 60, ,40 QPF06B1-020F14 64,3 60, ,39 QPF06B1-020F16 64,3 60, ,38 QPF06B1-020F18 64,3 60, ,37 QPF06B1-020F19 64,3 60, ,36 QPF06B1-020F20 64,3 60, ,35 QPF06B1-020F22 64,3 60, ,33 QPF06B1-020F24 64,3 60, ,33 QPF06B1-020F25 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 50

53 D m d , ,43 QPF06B1-021F , ,42 QPF06B1-021F , ,41 QPF06B1-021F , ,41 QPF06B1-021F , ,39 QPF06B1-021F , ,38 QPF06B1-021F , ,37 QPF06B1-021F , ,47 QPF06B1-022F , ,46 QPF06B1-022F , ,46 QPF06B1-022F , ,45 QPF06B1-022F , ,43 QPF06B1-022F , ,42 QPF06B1-022F , ,41 QPF06B1-022F25 73,5 69, ,51 QPF06B1-023F16 73,5 69, ,50 QPF06B1-023F18 73,5 69, ,50 QPF06B1-023F19 73,5 69, ,49 QPF06B1-023F20 73,5 69, ,47 QPF06B1-023F22 73,5 69, ,46 QPF06B1-023F24 73,5 69, ,45 QPF06B1-023F , ,56 QPF06B1-024F , ,55 QPF06B1-024F , ,54 QPF06B1-024F , ,54 QPF06B1-024F , ,52 QPF06B1-024F , ,51 QPF06B1-024F , ,50 QPF06B1-024F , ,62 QPF06B1-025F , ,61 QPF06B1-025F , ,61 QPF06B1-025F , ,60 QPF06B1-025F , ,58 QPF06B1-025F , ,57 QPF06B1-025F , ,56 QPF06B1-025F , ,53 QPF06B1-025F , ,51 QPF06B1-025F30 Sprocket with finished bore Materiale: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 51

54 Simplex sprockets with hardened teeth and finished bore ccording to DIN ISO/R 606 ISO 08B1 1/2 x 5/16 SPROKET Tooth radius r 3 13 Radius width 1,3 Tooth width B 1 7,2 De d1 Dm De d1 Dm HIN 12,7 Internal width 7,75 Roller ø 8,51 B1 B1 Tipo = * D m d 1 D m d ,2 41, ,14 QPF08B1-010F12 45,2 41, ,15 QPF08B1-010F14 45,2 41, ,16 QPF08B1-010F16 48,7 45, ,18 QPF08B1-011F12 48,7 45, ,17 QPF08B1-011F14 48,7 45, ,17 QPF08B1-011F16 48,7 45, ,18 QPF08B1-011F18 48,7 45, ,19 QPF08B1-011F , ,24 QPF08B1-012F , ,23 QPF08B1-012F , ,22 QPF08B1-012F , ,21 QPF08B1-012F , ,22 QPF08B1-012F , ,22 QPF08B1-012F , ,23 QPF08B1-012F ,07 * ,24 QPF08B1-012F ,07 * ,24 QPF08B1-012F25 57,4 53, ,30 QPF08B1-013F12 57,4 53, ,29 QPF08B1-013F14 57,4 53, ,28 QPF08B1-013F15 57,4 53, ,28 QPF08B1-013F16 57,4 53, ,27 QPF08B1-013F18 57,4 53, ,26 QPF08B1-013F19 57,4 53, ,25 QPF08B1-013F20 57,4 53, ,24 QPF08B1-013F22 57,4 53, ,27 QPF08B1-013F24 57,4 53, ,27 QPF08B1-013F25 57,4 53,06 * ,27 QPF08B1-013F28 61,8 57, ,36 QPF08B1-014F12 61,8 57, ,35 QPF08B1-014F14 61,8 57, ,35 QPF08B1-014F15 61,8 57, ,34 QPF08B1-014F16 61,8 57, ,33 QPF08B1-014F18 61,8 57, ,32 QPF08B1-014F19 61,8 57, ,32 QPF08B1-014F20 61,8 57, ,30 QPF08B1-014F22 61,8 57, ,29 QPF08B1-014F24 61,8 57, ,28 QPF08B1-014F25 61,8 57, ,30 QPF08B1-014F28 61,8 57, ,30 QPF08B1-014F ,5 61, ,43 QPF08B1-015F12 65,5 61, ,42 QPF08B1-015F14 65,5 61, ,41 QPF08B1-015F15 65,5 61, ,41 QPF08B1-015F16 65,5 61, ,40 QPF08B1-015F18 65,5 61, ,39 QPF08B1-015F19 65,5 61, ,38 QPF08B1-015F20 65,5 61, ,37 QPF08B1-015F22 65,5 61, ,35 QPF08B1-015F24 65,5 61, ,34 QPF08B1-015F25 65,5 61, ,32 QPF08B1-015F28 65,5 61, ,32 QPF08B1-015F30 65,5 61, ,32 QPF08B1-015F32 69,5 65, ,49 QPF08B1-016F16 69,5 65, ,48 QPF08B1-016F18 69,5 65, ,48 QPF08B1-016F19 69,5 65, ,47 QPF08B1-016F20 69,5 65, ,45 QPF08B1-016F22 69,5 65, ,44 QPF08B1-016F24 69,5 65, ,43 QPF08B1-016F25 69,5 65, ,40 QPF08B1-016F28 69,5 65, ,38 QPF08B1-016F30 69,5 65, ,40 QPF08B1-016F32 73,6 69, ,55 QPF08B1-017F16 73,6 69, ,53 QPF08B1-017F18 73,6 69, ,53 QPF08B1-017F19 73,6 69, ,52 QPF08B1-017F20 73,6 69, ,51 QPF08B1-017F22 73,6 69, ,49 QPF08B1-017F24 73,6 69, ,48 QPF08B1-017F25 73,6 69, ,45 QPF08B1-017F28 73,6 69, ,43 QPF08B1-017F30 73,6 69, ,41 QPF08B1-017F32 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 52

55 D m d 1 77,8 73, ,63 QPF08B1-018F16 77,8 73, ,62 QPF08B1-018F18 77,8 73, ,61 QPF08B1-018F19 77,8 73, ,61 QPF08B1-018F20 77,8 73, ,59 QPF08B1-018F22 77,8 73, ,58 QPF08B1-018F24 77,8 73, ,57 QPF08B1-018F25 77,8 73, ,54 QPF08B1-018F28 77,8 73, ,52 QPF08B1-018F30 77,8 73, ,50 QPF08B1-018F32 77,8 73, ,46 QPF08B1-018F35 77,8 73, ,42 QPF08B1-018F38 81,7 77, ,72 QPF08B1-019F16 81,7 77, ,71 QPF08B1-019F18 81,7 77, ,70 QPF08B1-019F19 81,7 77, ,69 QPF08B1-019F20 81,7 77, ,68 QPF08B1-019F22 81,7 77, ,66 QPF08B1-019F24 81,7 77, ,65 QPF08B1-019F25 81,7 77, ,63 QPF08B1-019F28 81,7 77, ,61 QPF08B1-019F30 81,7 77, ,58 QPF08B1-019F32 81,7 77, ,55 QPF08B1-019F35 81,7 77, ,51 QPF08B1-019F38 85,8 81, ,81 QPF08B1-020F16 85,8 81, ,80 QPF08B1-020F18 85,8 81, ,79 QPF08B1-020F19 85,8 81, ,79 QPF08B1-020F20 85,8 81, ,77 QPF08B1-020F22 85,8 81, ,76 QPF08B1-020F24 85,8 81, ,75 QPF08B1-020F25 85,8 81, ,72 QPF08B1-020F28 85,8 81, ,70 QPF08B1-020F30 85,8 81, ,68 QPF08B1-020F32 85,8 81, ,64 QPF08B1-020F35 85,8 81, ,61 QPF08B1-020F38 89,7 85, ,91 QPF08B1-021F16 89,7 85, ,90 QPF08B1-021F18 89,7 85, ,89 QPF08B1-021F19 89,7 85, ,89 QPF08B1-021F20 89,7 85, ,87 QPF08B1-021F22 89,7 85, ,86 QPF08B1-021F24 89,7 85, ,85 QPF08B1-021F25 89,7 85, ,82 QPF08B1-021F28 89,7 85, ,80 QPF08B1-021F30 89,7 85, ,78 QPF08B1-021F32 89,7 85, ,74 QPF08B1-021F35 89,7 85, ,71 QPF08B1-021F D m d 1 93,8 89, ,98 QPF08B1-022F16 93,8 89, ,97 QPF08B1-022F18 93,8 89, ,96 QPF08B1-022F19 93,8 89, ,96 QPF08B1-022F20 93,8 89, ,94 QPF08B1-022F22 93,8 89, ,93 QPF08B1-022F24 93,8 89, ,92 QPF08B1-022F25 93,8 89, ,89 QPF08B1-022F28 93,8 89, ,87 QPF08B1-022F30 93,8 89, ,85 QPF08B1-022F32 93,8 89, ,81 QPF08B1-022F35 93,8 89, ,77 QPF08B1-022F38 98,2 93, ,00 QPF08B1-023F19 98,2 93, ,99 QPF08B1-023F20 98,2 93, ,98 QPF08B1-023F22 98,2 93, ,96 QPF08B1-023F24 98,2 93, ,95 QPF08B1-023F25 98,2 93, ,93 QPF08B1-023F28 98,2 93, ,91 QPF08B1-023F30 98,2 93, ,89 QPF08B1-023F32 98,2 93, ,85 QPF08B1-023F35 98,2 93, ,81 QPF08B1-023F38 101,8 97, ,03 QPF08B1-024F19 101,8 97, ,03 QPF08B1-024F20 101,8 97, ,01 QPF08B1-024F22 101,8 97, ,00 QPF08B1-024F24 101,8 97, ,99 QPF08B1-024F25 101,8 97, ,96 QPF08B1-024F28 101,8 97, ,94 QPF08B1-024F30 101,8 97, ,92 QPF08B1-024F32 101,8 97, ,88 QPF08B1-024F35 101,8 97, ,84 QPF08B1-024F38 105,8 101, ,07 QPF08B1-025F19 105,8 101, ,06 QPF08B1-025F20 105,8 101, ,05 QPF08B1-025F22 105,8 101, ,03 QPF08B1-025F24 105,8 101, ,02 QPF08B1-025F25 105,8 101, ,00 QPF08B1-025F28 105,8 101, ,98 QPF08B1-025F30 105,8 101, ,95 QPF08B1-025F32 105,8 101, ,92 QPF08B1-025F35 105,8 101, ,88 QPF08B1-025F38 Sprocket with finished bore Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 53

56 Simplex sprockets with hardened teeth and finished bore ccording to DIN ISO/R 606 ISO 10B-1 5/8 x 3/8 SPROKET Tooth radius r 3 16 Radius width 1,6 Tooth width B 1 9,1 De d1 Dm De d1 Dm HIN 15,875 Internal width 9,65 Roller ø 10,16 B1 B1 Tipo = * D m d 1 D m d ,5 51, ,27 QPF10B1-010F16 57,5 51, ,25 QPF10B1-010F19 57,5 51, ,25 QPF10B1-010F20 57,5 51,37 * ,27 QPF10B1-010F , ,35 QPF10B1-011F , ,34 QPF10B1-011F , ,33 QPF10B1-011F , ,33 QPF10B1-011F , ,35 QPF10B1-011F , ,34 QPF10B1-011F , ,34 QPF10B1-011F , ,44 QPF10B1-012F , ,43 QPF10B1-012F , ,42 QPF10B1-012F , ,42 QPF10B1-012F , ,40 QPF10B1-012F , ,38 QPF10B1-012F , ,40 QPF10B1-012F , ,40 QPF10B1-012F , ,40 QPF10B1-012F , ,41 QPF10B1-012F , ,54 QPF10B1-013F , ,53 QPF10B1-013F , ,52 QPF10B1-013F , ,51 QPF10B1-013F , ,50 QPF10B1-013F , ,48 QPF10B1-013F , ,47 QPF10B1-013F , ,44 QPF10B1-013F , ,44 QPF10B1-013F , ,45 QPF10B1-013F , ,65 QPF10B1-014F , ,63 QPF10B1-014F , ,63 QPF10B1-014F , ,62 QPF10B1-014F , ,60 QPF10B1-014F , ,59 QPF10B1-014F , ,58 QPF10B1-014F , ,55 QPF10B1-014F , ,53 QPF10B1-014F , ,50 QPF10B1-014F , ,74 QPF10B1-015F , ,74 QPF10B1-015F , ,72 QPF10B1-015F , ,70 QPF10B1-015F , ,69 QPF10B1-015F , ,66 QPF10B1-015F , ,64 QPF10B1-015F , ,62 QPF10B1-015F , ,58 QPF10B1-015F , ,84 QPF10B1-016F , ,83 QPF10B1-016F , ,81 QPF10B1-016F , ,80 QPF10B1-016F , ,79 QPF10B1-016F , ,76 QPF10B1-016F , ,74 QPF10B1-016F , ,71 QPF10B1-016F , ,68 QPF10B1-016F , ,64 QPF10B1-016F , ,89 QPF10B1-017F , ,88 QPF10B1-017F , ,87 QPF10B1-017F , ,85 QPF10B1-017F , ,84 QPF10B1-017F , ,81 QPF10B1-017F , ,79 QPF10B1-017F , ,76 QPF10B1-017F , ,73 QPF10B1-017F , ,69 QPF10B1-017F38 98,3 91, ,11 QPF10B1-018F19 98,3 91, ,11 QPF10B1-018F20 98,3 91, ,09 QPF10B1-018F22 98,3 91, ,07 QPF10B1-018F24 98,3 91, ,04 QPF10B1-018F28 98,3 91, ,01 QPF10B1-018F30 98,3 91, ,99 QPF10B1-018F32 98,3 91, ,95 QPF10B1-018F35 98,3 91, ,91 QPF10B1-018F38 98,3 91, ,88 QPF10B1-018F40 98,3 91, ,85 QPF10B1-018F42 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 54

57 D m d 1 103,3 96, ,17 QPF10B1-019F19 103,3 96, ,16 QPF10B1-019F20 103,3 96, ,15 QPF10B1-019F22 103,3 96, ,13 QPF10B1-019F24 103,3 96, ,12 QPF10B1-019F25 103,3 96, ,09 QPF10B1-019F28 103,3 96, ,07 QPF10B1-019F30 103,3 96, ,05 QPF10B1-019F32 103,3 96, ,01 QPF10B1-019F35 103,3 96, ,97 QPF10B1-019F38 103,3 96, ,94 QPF10B1-019F40 103,3 96, ,91 QPF10B1-019F42 108,4 101, ,33 QPF10B1-020F19 108,4 101, ,32 QPF10B1-020F20 108,4 101, ,30 QPF10B1-020F22 108,4 101, ,29 QPF10B1-020F24 108,4 101, ,28 QPF10B1-020F25 108,4 101, ,25 QPF10B1-020F28 108,4 101, ,23 QPF10B1-020F30 108,4 101, ,20 QPF10B1-020F32 108,4 101, ,16 QPF10B1-020F35 108,4 101, ,12 QPF10B1-020F38 108,4 101, ,10 QPF10B1-020F40 108,4 101, ,06 QPF10B1-020F42 113,4 106, ,39 QPF10B1-021F19 113,4 106, ,38 QPF10B1-021F20 113,4 106, ,37 QPF10B1-021F22 113,4 106, ,35 QPF10B1-021F24 113,4 106, ,34 QPF10B1-021F25 113,4 106, ,31 QPF10B1-021F28 113,4 106, ,29 QPF10B1-021F30 113,4 106, ,26 QPF10B1-021F32 113,4 106, ,23 QPF10B1-021F35 113,4 106, ,19 QPF10B1-021F38 113,4 106, ,16 QPF10B1-021F40 113,4 106, ,13 QPF10B1-021F , ,55 QPF10B1-022F , ,54 QPF10B1-022F , ,53 QPF10B1-022F , ,51 QPF10B1-022F , ,50 QPF10B1-022F , ,47 QPF10B1-022F , ,45 QPF10B1-022F , ,43 QPF10B1-022F , ,39 QPF10B1-022F , ,35 QPF10B1-022F , ,32 QPF10B1-022F , ,29 QPF10B1-022F D m d 1 123,5 116, ,62 QPF10B1-023F19 123,5 116, ,62 QPF10B1-023F20 123,5 116, ,60 QPF10B1-023F22 123,5 116, ,58 QPF10B1-023F24 123,5 116, ,57 QPF10B1-023F25 123,5 116, ,55 QPF10B1-023F28 123,5 116, ,52 QPF10B1-023F30 123,5 116, ,50 QPF10B1-023F32 123,5 116, ,46 QPF10B1-023F35 123,5 116, ,42 QPF10B1-023F38 123,5 116, ,39 QPF10B1-023F40 123,5 116, ,36 QPF10B1-023F42 128,3 121, ,69 QPF10B1-024F19 128,3 121, ,68 QPF10B1-024F20 128,3 121, ,67 QPF10B1-024F22 128,3 121, ,65 QPF10B1-024F24 128,3 121, ,64 QPF10B1-024F25 128,3 121, ,61 QPF10B1-024F28 128,3 121, ,59 QPF10B1-024F30 128,3 121, ,57 QPF10B1-024F32 128,3 121, ,53 QPF10B1-024F35 128,3 121, ,49 QPF10B1-024F38 128,3 121, ,46 QPF10B1-024F40 128,3 121, ,43 QPF10B1-024F , ,78 QPF10B1-025F , ,77 QPF10B1-025F , ,75 QPF10B1-025F , ,74 QPF10B1-025F , ,73 QPF10B1-025F , ,70 QPF10B1-025F , ,68 QPF10B1-025F , ,65 QPF10B1-025F , ,62 QPF10B1-025F , ,57 QPF10B1-025F , ,55 QPF10B1-025F , ,52 QPF10B1-025F42 Sprocket with finished bore Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 55

58 Simplex sprockets with hardened teeth and finished bore ccording to DIN ISO/R 606 ISO 12B-1 3/4 x 7/16 SPROKET Tooth radius r 3 19 Radius width 2 Tooth width B 1 11,1 De d1 Dm HIN 19,05 Internal width 11,68 Roller ø 12,07 B1 D m d 1 D m d , ,47 QPF12B1-010F , ,46 QPF12B1-010F , ,43 QPF12B1-010F , ,42 QPF12B1-010F , ,65 QPF12B1-011F , ,64 QPF12B1-011F , ,60 QPF12B1-011F , ,59 QPF12B1-011F25 81,5 73, ,78 QPF12B1-012F19 81,5 73, ,77 QPF12B1-012F20 81,5 73, ,73 QPF12B1-012F24 81,5 73, ,72 QPF12B1-012F25 81,5 73, ,69 QPF12B1-012F28 81,5 73, ,66 QPF12B1-012F30 81,5 73, ,65 QPF12B1-012F32 81,5 73, ,66 QPF12B1-012F35 87,5 79, ,95 QPF12B1-013F19 87,5 79, ,94 QPF12B1-013F20 87,5 79, ,90 QPF12B1-013F24 87,5 79, ,89 QPF12B1-013F25 87,5 79, ,86 QPF12B1-013F28 87,5 79, ,83 QPF12B1-013F30 87,5 79, ,80 QPF12B1-013F32 87,5 79, ,76 QPF12B1-013F35 87,5 79, ,71 QPF12B1-013F38 93,6 85, ,13 QPF12B1-014F19 93,6 85, ,12 QPF12B1-014F20 93,6 85, ,09 QPF12B1-014F24 93,6 85, ,08 QPF12B1-014F25 93,6 85, ,04 QPF12B1-014F28 93,6 85, ,02 QPF12B1-014F30 93,6 85, ,99 QPF12B1-014F32 93,6 85, ,94 QPF12B1-014F35 93,6 85, ,90 QPF12B1-014F38 93,6 85, ,92 QPF12B1-014F ,8 91, ,29 QPF12B1-015F24 99,8 91, ,28 QPF12B1-015F25 99,8 91, ,24 QPF12B1-015F28 99,8 91, ,22 QPF12B1-015F30 99,8 91, ,19 QPF12B1-015F32 99,8 91, ,15 QPF12B1-015F35 99,8 91, ,10 QPF12B1-015F38 99,8 91, ,07 QPF12B1-015F40 105,5 97, ,52 QPF12B1-016F19 105,5 97, ,51 QPF12B1-016F20 105,5 97, ,48 QPF12B1-016F24 105,5 97, ,46 QPF12B1-016F25 105,5 97, ,43 QPF12B1-016F28 105,5 97, ,41 QPF12B1-016F30 105,5 97, ,38 QPF12B1-016F32 105,5 97, ,33 QPF12B1-016F35 105,5 97, ,29 QPF12B1-016F38 105,5 97, ,25 QPF12B1-016F40 111,5 103, ,67 QPF12B1-017F25 111,5 103, ,64 QPF12B1-017F28 111,5 103, ,61 QPF12B1-017F30 111,5 103, ,58 QPF12B1-017F32 111,5 103, ,54 QPF12B1-017F35 111,5 103, ,49 QPF12B1-017F38 111,5 103, ,46 QPF12B1-017F40 111,5 103, ,42 QPF12B1-017F , ,77 QPF12B1-018F , ,74 QPF12B1-018F , ,71 QPF12B1-018F , ,69 QPF12B1-018F , ,64 QPF12B1-018F , ,59 QPF12B1-018F , ,56 QPF12B1-018F , ,52 QPF12B1-018F42 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 56

59 D m d 1 124,2 115, ,88 QPF12B1-019F25 124,2 115, ,84 QPF12B1-019F28 124,2 115, ,82 QPF12B1-019F30 124,2 115, ,79 QPF12B1-019F32 124,2 115, ,75 QPF12B1-019F35 124,2 115, ,70 QPF12B1-019F38 124,2 115, ,66 QPF12B1-019F40 124,2 115, ,63 QPF12B1-019F42 124,2 115, ,57 QPF12B1-019F45 124,2 115, ,51 QPF12B1-019F48 124,2 115, ,47 QPF12B1-019F50 129,7 121, ,97 QPF12B1-020F25 129,7 121, ,94 QPF12B1-020F28 129,7 121, ,91 QPF12B1-020F30 129,7 121, ,89 QPF12B1-020F32 129,7 121, ,84 QPF12B1-020F35 129,7 121, ,79 QPF12B1-020F38 129,7 121, ,76 QPF12B1-020F40 129,7 121, ,72 QPF12B1-020F42 129,7 121, ,67 QPF12B1-020F45 129,7 121, ,61 QPF12B1-020F48 129,7 121, ,56 QPF12B1-020F , ,34 QPF12B1-021F , ,30 QPF12B1-021F , ,28 QPF12B1-021F , ,25 QPF12B1-021F , ,21 QPF12B1-021F , ,16 QPF12B1-021F , ,13 QPF12B1-021F , ,09 QPF12B1-021F , ,04 QPF12B1-021F , ,97 QPF12B1-021F , ,93 QPF12B1-021F , ,67 QPF12B1-022F , ,63 QPF12B1-022F , ,60 QPF12B1-022F , ,57 QPF12B1-022F , ,52 QPF12B1-022F , ,46 QPF12B1-022F , ,42 QPF12B1-022F , ,38 QPF12B1-022F , ,32 QPF12B1-022F , ,25 QPF12B1-022F , ,20 QPF12B1-022F D m d , ,83 QPF12B1-023F , ,79 QPF12B1-023F , ,76 QPF12B1-023F , ,73 QPF12B1-023F , ,68 QPF12B1-023F , ,62 QPF12B1-023F , ,58 QPF12B1-023F , ,54 QPF12B1-023F , ,48 QPF12B1-023F , ,41 QPF12B1-023F , ,36 QPF12B1-023F50 153,9 145, ,93 QPF12B1-024F25 153,9 145, ,89 QPF12B1-024F28 153,9 145, ,86 QPF12B1-024F30 153,9 145, ,83 QPF12B1-024F32 153,9 145, ,78 QPF12B1-024F35 153,9 145, ,73 QPF12B1-024F38 153,9 145, ,69 QPF12B1-024F40 153,9 145, ,65 QPF12B1-024F42 153,9 145, ,58 QPF12B1-024F45 153,9 145, ,51 QPF12B1-024F48 153,9 145, ,46 QPF12B1-024F ,06 QPF12B1-025F ,02 QPF12B1-025F ,99 QPF12B1-025F ,96 QPF12B1-025F ,91 QPF12B1-025F ,86 QPF12B1-025F ,82 QPF12B1-025F ,78 QPF12B1-025F ,71 QPF12B1-025F ,64 QPF12B1-025F ,60 QPF12B1-025F50 Sprocket with finished bore Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 57

60 Simplex sprockets with hardened teeth and finished bore ccording to DIN ISO/R 606 ISO 16B-1 1 x 17,02 mm SPROKET Tooth radius r 3 26 Radius width 2,5 Tooth width B 1 16,2 De d1 Dm HIN 25,4 Internal width 17,02 Roller ø 15,88 B1 D m d 1 D m d ,5 90, ,43 QPF16B1-011F25 99,5 90, ,39 QPF16B1-011F28 99,5 90, ,36 QPF16B1-011F30 99,5 90, ,33 QPF16B1-011F32 99,5 90, ,28 QPF16B1-011F35 99,5 90, ,30 QPF16B1-011F38 99,5 90, ,30 QPF16B1-011F40 99,5 90, ,30 QPF16B1-011F , ,74 QPF16B1-012F , ,70 QPF16B1-012F , ,67 QPF16B1-012F , ,64 QPF16B1-012F , ,59 QPF16B1-012F , ,54 QPF16B1-012F , ,50 QPF16B1-012F , ,46 QPF16B1-012F , ,12 QPF16B1-013F , ,08 QPF16B1-013F , ,05 QPF16B1-013F , ,02 QPF16B1-013F , ,97 QPF16B1-013F , ,92 QPF16B1-013F , ,88 QPF16B1-013F , ,84 QPF16B1-013F , ,77 QPF16B1-013F , ,70 QPF16B1-013F , ,75 QPF16B1-013F , ,46 QPF16B1-014F , ,42 QPF16B1-014F , ,39 QPF16B1-014F , ,36 QPF16B1-014F , ,31 QPF16B1-014F , ,25 QPF16B1-014F , ,22 QPF16B1-014F , ,17 QPF16B1-014F , ,11 QPF16B1-014F , ,04 QPF16B1-014F , ,99 QPF16B1-014F , ,87 QPF16B1-015F , ,83 QPF16B1-015F , ,80 QPF16B1-015F , ,77 QPF16B1-015F , ,72 QPF16B1-015F , ,67 QPF16B1-015F , ,63 QPF16B1-015F , ,59 QPF16B1-015F , ,53 QPF16B1-015F , ,46 QPF16B1-015F , ,41 QPF16B1-015F , ,61 QPF16B1-016F , ,57 QPF16B1-016F , ,53 QPF16B1-016F , ,50 QPF16B1-016F , ,44 QPF16B1-016F , ,38 QPF16B1-016F , ,34 QPF16B1-016F , ,29 QPF16B1-016F , ,22 QPF16B1-016F , ,14 QPF16B1-016F , ,09 QPF16B1-016F , ,84 QPF16B1-017F , ,80 QPF16B1-017F , ,77 QPF16B1-017F , ,73 QPF16B1-017F , ,68 QPF16B1-017F , ,62 QPF16B1-017F , ,57 QPF16B1-017F , ,53 QPF16B1-017F , ,45 QPF16B1-017F , ,38 QPF16B1-017F , ,32 QPF16B1-017F50 Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 58

61 D m d , ,09 QPF16B1-018F , ,05 QPF16B1-018F , ,01 QPF16B1-018F , ,98 QPF16B1-018F , ,92 QPF16B1-018F , ,86 QPF16B1-018F , ,82 QPF16B1-018F , ,77 QPF16B1-018F , ,70 QPF16B1-018F , ,62 QPF16B1-018F , ,57 QPF16B1-018F50 165,2 154, ,36 QPF16B1-019F25 165,2 154, ,31 QPF16B1-019F28 165,2 154, ,28 QPF16B1-019F30 165,2 154, ,24 QPF16B1-019F32 165,2 154, ,19 QPF16B1-019F35 165,2 154, ,13 QPF16B1-019F38 165,2 154, ,08 QPF16B1-019F40 165,2 154, ,04 QPF16B1-019F42 165,2 154, ,96 QPF16B1-019F45 165,2 154, ,89 QPF16B1-019F48 165,2 154, ,83 QPF16B1-019F50 173,2 162, ,63 QPF16B1-020F25 173,2 162, ,58 QPF16B1-020F28 173,2 162, ,55 QPF16B1-020F30 173,2 162, ,52 QPF16B1-020F32 173,2 162, ,46 QPF16B1-020F35 173,2 162, ,40 QPF16B1-020F38 173,2 162, ,36 QPF16B1-020F40 173,2 162, ,31 QPF16B1-020F42 173,2 162, ,24 QPF16B1-020F45 173,2 162, ,16 QPF16B1-020F48 173,2 162, ,10 QPF16B1-020F50 181,2 170, ,29 QPF16B1-021F25 181,2 170, ,24 QPF16B1-021F28 181,2 170, ,21 QPF16B1-021F30 181,2 170, ,18 QPF16B1-021F32 181,2 170, ,12 QPF16B1-021F35 181,2 170, ,06 QPF16B1-021F38 181,2 170, ,02 QPF16B1-021F40 181,2 170, ,97 QPF16B1-021F42 181,2 170, ,90 QPF16B1-021F45 181,2 170, ,82 QPF16B1-021F48 189,3 178, ,59 QPF16B1-022F25 189,3 178, ,55 QPF16B1-022F28 189,3 178, ,51 QPF16B1-022F30 189,3 178, ,48 QPF16B1-022F32 189,3 178, ,42 QPF16B1-022F35 189,3 178, ,69 QPF16B1-022F38 189,3 178, ,64 QPF16B1-022F40 189,3 178, ,59 QPF16B1-022F42 189,3 178, ,51 QPF16B1-022F45 189,3 178, ,42 QPF16B1-022F48 189,3 178, ,36 QPF16B1-022F D m d 1 197,5 186, ,26 QPF16B1-023F25 197,5 186, ,22 QPF16B1-023F28 197,5 186, ,18 QPF16B1-023F30 197,5 186, ,14 QPF16B1-023F32 197,5 186, ,08 QPF16B1-023F35 197,5 186, ,01 QPF16B1-023F38 197,5 186, ,96 QPF16B1-023F40 197,5 186, ,91 QPF16B1-023F42 197,5 186, ,83 QPF16B1-023F45 197,5 186, ,74 QPF16B1-023F48 197,5 186, ,68 QPF16B1-023F50 205,5 194, ,59 QPF16B1-024F25 205,5 194, ,54 QPF16B1-024F28 205,5 194, ,50 QPF16B1-024F30 205,5 194, ,46 QPF16B1-024F32 205,5 194, ,40 QPF16B1-024F35 205,5 194, ,33 QPF16B1-024F38 205,5 194, ,29 QPF16B1-024F40 205,5 194, ,24 QPF16B1-024F42 205,5 194, ,15 QPF16B1-024F45 205,5 194, ,07 QPF16B1-024F48 205,5 194, ,01 QPF16B1-024F50 213,5 202, ,93 QPF16B1-025F25 213,5 202, ,88 QPF16B1-025F28 213,5 202, ,84 QPF16B1-025F30 213,5 202, ,80 QPF16B1-025F32 213,5 202, ,74 QPF16B1-025F35 213,5 202, ,67 QPF16B1-025F38 213,5 202, ,62 QPF16B1-025F40 213,5 202, ,57 QPF16B1-025F42 213,5 202, ,49 QPF16B1-025F45 213,5 202, ,40 QPF16B1-025F48 213,5 202, ,34 QPF16B1-025F50 Sprocket with finished bore Material: 45 External diameter mm diameter mm D m Hub diameter mm eight kg 59

62

63 Plate heels for Simplex, Duplex and Triplex hain PLTE HEELS

64 INDEX Plate heel for Simplex, duplex and triplex chain Page Simplex Plate heel ISO 04B-1 6 x 2,8 mm 63 ISO 05B-1 8 x 3 mm 64 ISO 06B-1 3/8 x 7/32 65 ISO /2 x 1/8 66 ISO /2 x 3/16 67 ISO 08B-1 1/2 x 5/16 68 ISO 10B-1 5/8 x 3/8 69 ISO 12B-1 3/4 x 7/16 70 ISO 16B-1 1 x 17,02 mm 71 ISO 20B-1 1 1/4 x 3/4 72 ISO 24B-1 1 1/2 x 1 73 ISO 28B-1 1 3/4 x 1 1/4 74 ISO 32B-1 2 x 1 1/4 75 Duplex Plate heel ISO 05B-2 8 x 3 mm 76 ISO 06B-2 3/8 x 7/32 77 ISO 08B-2 1/2 x 5/16 78 ISO 10B-2 5/8 x 3/8 79 ISO 12B-2 3/4 x 7/16 80 ISO 16B-2 1 x 17,02 mm 81 ISO 20B-2 1 1/4 x 3/4 82 ISO 24B-2 1 1/2 x 1 83 ISO 28B-2 1 3/4 x 1 1/4 84 ISO 32B-2 2 x 1 1/4 85 Triplex Plate heel ISO 06B-3 3/8 x 7/32 86 ISO 08B-3 1/2 x 5/16 87 ISO 10B-3 5/8 x 3/8 88 ISO 12B-3 3/4 x 7/16 89 ISO 16B-3 1 x 17,02 mm 90 ISO 20B-3 1 1/4 x 3/4 91 ISO 24B-3 1 1/2 x 1 92 ISO 28B-3 1 3/4 x 1 1/4 93 ISO 32B-3 2 x 1 1/4 94

65 SIMPLEX PLTE HEELS Plate heels for chain according to DIN ISO/R 606 ISO 04B-1 6 x 2,8 mm PLTE HEEL Tooth radius r 3 6 Radius width 0,7 Tooth width B 1 2,6 idth H (with 51) 4 De d1 H HIN 6 Internal witdth 2,8 Roller ø 4 B1 d 1 d ,00 15,67 5 0,01 QS04B ,90 17,54 5 0,01 QS04B ,70 19,42 6 0,01 QS04B ,60 21,30 6 0,01 QS04B ,40 23,18 6 0,01 QS04B ,30 25,05 8 0,01 QS04B ,20 26,96 8 0,01 QS04B ,00 28,86 8 0,01 QS04B ,00 30,76 8 0,01 QS04B ,00 32,65 8 0,02 QS04B ,90 34,55 8 0,02 QS04B ,80 36,44 8 0,02 QS04B ,70 38,34 8 0,02 QS04B ,60 40,25 8 0,03 QS04B ,50 42,16 8 0,03 QS04B ,40 44,06 8 0,03 QS04B ,30 45,96 8 0,03 QS04B ,20 47,87 8 0,04 QS04B ,10 49,76 8 0,04 QS04B ,00 51,67 8 0,04 QS04B ,90 53,58 8 0,05 QS04B ,80 55,50 8 0,05 QS04B ,80 57,42 8 0,05 QS04B ,70 59,31 8 0,06 QS04B ,60 61,21 8 0,06 QS04B ,50 63,11 8 0,06 QS04B ,40 65,02 8 0,07 QS04B ,30 66,93 8 0,07 QS04B ,20 68,84 8 0,08 QS04B ,10 70,75 8 0,08 QS04B ,00 72,66 8 0,08 QS04B ,90 74,57 8 0,09 QS04B ,90 76,47 8 0,09 QS04B ,80 78, ,10 QS04B ,70 80, ,10 QS04B ,70 82, ,11 QS04B ,60 84, ,11 QS04B ,50 86, ,12 QS04B ,40 87, ,12 QS04B ,30 89, ,13 QS04B ,20 91, ,13 QS04B ,10 93, ,14 QS04B ,00 95, ,15 QS04B ,90 97, ,15 QS04B ,80 99, ,16 QS04B ,70 101, ,16 QS04B ,60 103, ,17 QS04B ,60 105, ,18 QS04B ,50 107, ,18 QS04B ,40 108, ,19 QS04B ,30 110, ,20 QS04B ,20 112, ,20 QS04B ,10 114, ,21 QS04B ,90 118, ,22 QS04B ,70 122, ,24 QS04B ,60 124, ,25 QS04B ,50 126, ,25 QS04B ,40 129, ,27 QS04B ,20 133, ,29 QS04B ,00 137, ,30 QS04B ,70 143, ,33 QS04B ,60 145, ,34 QS04B ,50 149, ,35 QS04B ,30 152, ,37 QS04B ,80 162, ,42 QS04B ,40 171, ,47 QS04B ,90 181, ,53 QS04B ,50 191, ,58 QS04B ,60 210, ,71 QS04B ,20 217, ,76 QS04B ,70 229, ,84 QS04B ,20 238, ,92 QS04B1-125 Simplex Plate heel Material: 45 (Fe360B with 58) External diameter mm diameter mm eight kg hain drives 63

66 Plate heels for chain according to DIN ISO/R 606 ISO 05B-1 8 x 3 mm PLTE HEEL Tooth radius r 3 8 Radius width 1 Tooth width B 1 2,8 idth H (with 46) 4 De d1 H HIN 8 Internal witdth 3 Roller ø 5 B1 d 1 d ,00 20,90 6 0,01 QS05B ,60 23,39 6 0,01 QS05B ,20 25,89 8 0,01 QS05B ,70 28,39 8 0,01 QS05B ,20 30,91 8 0,02 QS05B ,70 33,42 8 0,02 QS05B ,20 35,95 8 0,02 QS05B ,70 38,48 8 0,02 QS05B ,30 41,01 8 0,03 QS05B ,80 43,53 8 0,03 QS05B ,30 46,07 8 0,04 QS05B ,90 48,61 8 0,04 QS05B ,40 51,14 8 0,04 QS05B ,00 53,68 8 0,05 QS05B ,50 56,21 8 0,05 QS05B ,00 58,75 8 0,06 QS05B ,60 61,29 8 0,06 QS05B ,50 63,83 8 0,07 QS05B ,50 66, ,07 QS05B ,20 68, ,08 QS05B ,80 71, ,09 QS05B ,30 73, ,09 QS05B ,80 76, ,10 QS05B ,40 79, ,11 QS05B ,90 81, ,11 QS05B ,50 84, ,12 QS05B ,00 86, ,13 QS05B ,50 89, ,14 QS05B ,00 91, ,14 QS05B ,60 94, ,15 QS05B ,20 96, ,16 QS05B ,70 99, ,17 QS05B ,30 101, ,18 QS05B ,80 104, ,19 QS05B ,40 107, ,20 QS05B ,90 109, ,21 QS05B ,50 112, ,22 QS05B ,00 114, ,23 QS05B ,60 117, ,24 QS05B ,10 119, ,25 QS05B ,60 122, ,26 QS05B ,20 124, ,27 QS05B ,70 127, ,28 QS05B ,30 129, ,29 QS05B ,80 132, ,30 QS05B ,40 135, ,31 QS05B ,90 137, ,33 QS05B ,50 140, ,34 QS05B ,00 142, ,35 QS05B ,60 145, ,36 QS05B ,00 147, ,38 QS05B ,60 150, ,39 QS05B ,20 152, ,40 QS05B ,00 157, ,43 QS05B ,10 163, ,46 QS05B ,60 165, ,47 QS05B ,20 168, ,49 QS05B ,30 173, ,52 QS05B ,40 178, ,55 QS05B ,50 183, ,58 QS05B ,10 191, ,63 QS05B ,70 193, ,64 QS05B ,80 198, ,68 QS05B ,90 203, ,71 QS05B ,60 216, ,81 QS05B ,40 229, ,91 QS05B ,10 241, ,01 QS05B ,90 254, ,12 QS05B ,30 280, ,36 QS05B ,50 290, ,46 QS05B ,00 305, ,62 QS05B ,50 318, ,75 QS05B1-125 Material: 45 (Fe360B with 58) External diameter mm diameter mm eight kg 64 hain drives

67 Simplex Plate heels for chain according to DIN ISO/R 606 ISO 06B-1 3/8 x 7/32 PLTE HEEL Tooth radius r 3 10 Radius width 1 Tooth width B 1 5,3 idth H (with 100) 7 De d1 H HIN 9,525 Internal witdth 5,72 Roller ø 6,35 B1 d 1 d ,00 24,89 6 0,02 QS06B ,00 27,85 8 0,02 QS06B ,00 30,82 8 0,03 QS06B ,00 33,80 8 0,04 QS06B ,00 36,80 8 0,04 QS06B ,00 39,79 8 0,05 QS06B ,30 42,80 8 0,06 QS06B ,30 45,81 8 0,07 QS06B ,30 48, ,08 QS06B ,30 51, ,09 QS06B ,30 54, ,10 QS06B ,30 57, ,11 QS06B ,30 60, ,12 QS06B ,00 63, ,13 QS06B ,00 66, ,14 QS06B ,50 69, ,16 QS06B ,00 72, ,17 QS06B ,00 76, ,19 QS06B ,00 79, ,2 QS06B ,00 82, ,22 QS06B ,00 85, ,23 QS06B ,00 88, ,25 QS06B ,70 91, ,27 QS06B ,30 94, ,29 QS06B ,30 97, ,31 QS06B ,30 100, ,33 QS06B ,30 103, ,35 QS06B ,40 106, ,37 QS06B ,40 109, ,39 QS06B ,40 112, ,4 QS06B ,50 115, ,43 QS06B ,50 118, ,46 QS06B ,50 121, ,48 QS06B ,50 124, ,50 QS06B ,60 127, ,53 QS06B ,60 130, ,55 QS06B ,60 133, ,56 QS06B ,70 136, ,60 QS06B ,70 139, ,63 QS06B ,70 142, ,66 QS06B ,70 145, ,69 QS06B ,70 148, ,72 QS06B ,70 151, ,75 QS06B ,70 154, ,78 QS06B ,80 157, ,81 QS06B ,80 160, ,84 QS06B ,80 163, ,87 QS06B ,80 166, ,91 QS06B ,80 169, ,94 QS06B ,90 172, ,97 QS06B ,90 175, ,01 QS06B ,00 178, ,04 QS06B ,00 181, ,08 QS06B ,10 188, ,15 QS06B ,20 194, ,23 QS06B ,60 197, ,27 QS06B ,60 200, ,30 QS06B ,70 206, ,39 QS06B ,70 212, ,47 QS06B ,80 218, ,56 QS06B ,90 227, ,69 QS06B ,90 230, ,73 QS06B ,00 236, ,83 QS06B ,10 242, ,92 QS06B ,20 257, ,17 QS06B ,40 272, ,44 QS06B ,50 288, ,71 QS06B ,70 303, ,01 QS06B ,00 333, ,65 QS06B ,50 345, ,92 QS06B ,30 363, ,34 QS06B ,50 379, ,71 QS06B1-125 Simplex Plate heel Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg hain drives 65

68 Simplex Plate heel for chain according to DIN ISO/R 606 ISO /2 x 1/8 PLTE HEEL Tooth radius r 3 13 Radius width 1 Tooth width B 1 3 idth H (with 30) 4 idth H (with 90) 6 De d1 H HIN 12,7 Internal witdth 3,3 Roller ø 7,75 B1 d 1 d ,20 33,18 8 0,01 QS ,50 37,13 8 0,02 QS ,20 41,10 8 0,03 QS ,60 45,07 8 0,03 QS ,90 49,07 8 0,04 QS ,40 53,06 8 0,05 QS ,80 57,07 8 0,05 QS ,80 61,09 8 0,06 QS ,90 65,10 8 0,07 QS ,90 69,11 8 0,08 QS ,90 73,14 8 0,09 QS ,90 77,16 8 0,10 QS ,90 81,19 8 0,12 QS ,00 85,22 8 0,13 QS ,00 89, ,14 QS ,00 93, ,16 QS ,00 97, ,17 QS ,10 101, ,18 QS ,20 105, ,20 QS ,40 109, ,22 QS ,40 113, ,23 QS ,40 117, ,25 QS ,50 121, ,27 QS ,50 125, ,29 QS ,50 129, ,30 QS ,60 133, ,32 QS ,60 137, ,35 QS ,60 141, ,37 QS ,70 145, ,39 QS ,70 149, ,41 QS ,80 153, ,43 QS ,80 157, ,45 QS ,80 161, ,48 QS ,40 165, ,50 QS ,40 169, ,53 QS ,50 173, ,55 QS ,50 178, ,58 QS ,50 182, ,61 QS ,60 186, ,63 QS ,60 190, ,66 QS ,70 194, ,69 QS ,70 198, ,72 QS ,80 202, ,75 QS ,80 206, ,78 QS ,90 210, ,81 QS ,90 214, ,84 QS ,00 218, ,88 QS ,00 222, ,91 QS ,10 226, ,94 QS ,10 230, ,98 QS ,20 234, ,01 QS ,20 238, ,05 QS ,20 242, ,08 QS ,70 250, ,16 QS ,80 258, ,23 QS ,80 262, ,27 QS ,90 266, ,31 QS ,90 274, ,39 QS ,00 283, ,47 QS ,10 291, ,56 QS ,30 307, ,74 QS ,40 315, ,84 QS ,40 323, ,93 QS ,70 343, ,18 QS ,90 363, ,45 QS ,30 404, ,03 QS ,70 444, ,67 QS ,90 460, ,94 QS ,20 485, ,36 QS ,40 505, ,74 QS Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 66 hain drives

69 Simplex Plate heel for chain according to DIN ISO/R 606 ISO /2 x 3/16 PLTE HEEL Tooth radius r 3 13 Radius width 1,3 Tooth width B 1 4,5 De d1 idth H (with 90) 6 H HIN 12,7 Internal witdth 4,88 Roller ø 7,75 B1 d 1 d ,50 33,18 8 0,02 QS ,50 37,13 8 0,03 QS ,20 41,10 8 0,04 QS ,60 45,07 8 0,05 QS ,90 49,07 8 0,06 QS ,40 53,06 8 0,07 QS ,80 57,07 8 0,08 QS ,80 61,09 8 0,10 QS ,90 65,10 8 0,11 QS ,90 69,11 8 0,13 QS ,90 73,14 8 0,14 QS ,90 77,16 8 0,16 QS ,90 81,19 8 0,18 QS ,00 85,22 8 0,20 QS ,00 89, ,21 QS ,00 93, ,24 QS ,00 97, ,26 QS ,10 101, ,28 QS ,20 105, ,30 QS ,40 109, ,33 QS ,40 113, ,35 QS ,40 117, ,38 QS ,50 121, ,40 QS ,50 125, ,43 QS ,50 159, ,70 QS ,60 133, ,49 QS ,60 137, ,52 QS ,60 141, ,55 QS ,70 145, ,58 QS ,70 149, ,61 QS ,80 153, ,65 QS ,80 157, ,68 QS ,80 161, ,72 QS ,40 165, ,76 QS ,40 169, ,79 QS ,50 173, ,83 QS ,50 178, ,87 QS ,50 182, ,91 QS ,60 186, ,95 QS ,60 190, ,99 QS ,70 194, ,04 QS ,70 198, ,08 QS ,80 202, ,13 QS ,80 206, ,17 QS ,90 210, ,22 QS ,90 214, ,27 QS ,00 218, ,32 QS ,00 222, ,37 QS ,10 226, ,42 QS ,10 230, ,47 QS ,20 234, ,52 QS ,20 238, ,57 QS ,20 242, ,63 QS ,70 250, ,74 QS ,80 258, ,85 QS ,80 262, ,91 QS ,90 266, ,97 QS ,90 274, ,09 QS ,00 283, ,21 QS ,10 291, ,34 QS ,30 307, ,61 QS ,40 315, ,76 QS ,40 323, ,90 QS ,70 343, ,28 QS ,90 363, ,67 QS ,30 404, ,54 QS ,70 444, ,50 QS ,90 460, ,91 QS ,20 485, ,55 QS ,40 505, ,11 QS Simplex Plate heel Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg hain drives 67

70 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 08B-1 1/2 x 5/16 PLTE HEEL Tooth radius r 3 13 Radius width 1,3 Tooth width B 1 7,2 De d1 HIN 12,7 Internal witdth 7,75 Roller ø 8,51 B1 d 1 d ,00 33,18 8 0,05 QS08B ,00 37,13 8 0,06 QS08B ,20 41,10 8 0,07 QS08B ,70 45, ,09 QS08B ,00 49, ,10 QS08B ,40 53, ,12 QS08B ,80 57, ,14 QS08B ,50 61, ,16 QS08B ,50 65, ,18 QS08B ,60 69, ,21 QS08B ,80 73, ,23 QS08B ,70 77, ,26 QS08B ,80 81, ,29 QS08B ,70 85, ,32 QS08B ,80 89, ,35 QS08B ,20 93, ,38 QS08B ,80 97, ,42 QS08B ,80 101, ,45 QS08B ,00 105, ,48 QS08B ,00 109, ,52 QS08B ,00 113, ,56 QS08B ,00 117, ,60 QS08B ,10 121, ,65 QS08B ,20 125, ,69 QS08B ,30 129, ,74 QS08B ,40 133, ,79 QS08B ,60 137, ,83 QS08B ,70 141, ,89 QS08B ,00 145, ,94 QS08B ,60 149, ,99 QS08B ,60 153, ,05 QS08B ,70 157, ,10 QS08B ,80 161, ,16 QS08B ,40 165, ,21 QS08B ,40 169, ,27 QS08B ,70 173, ,33 QS08B ,80 178, ,40 QS08B ,00 182, ,46 QS08B ,10 186, ,53 QS08B ,20 190, ,60 QS08B ,30 194, ,67 QS08B ,30 198, ,74 QS08B ,30 202, ,81 QS08B ,10 206, ,88 QS08B ,10 210, ,96 QS08B ,20 214, ,04 QS08B ,10 218, ,11 QS08B ,10 222, ,19 QS08B ,20 226, ,27 QS08B ,40 230, ,36 QS08B ,50 234, ,44 QS08B ,50 238, ,53 QS08B ,60 242, ,61 QS08B ,90 250, ,78 QS08B ,10 258, ,96 QS08B ,00 262, ,06 QS08B ,00 266, ,15 QS08B ,00 274, ,35 QS08B ,00 283, ,55 QS08B ,20 291, ,76 QS08B ,20 303, ,08 QS08B ,30 307, ,19 QS08B ,40 315, ,42 QS08B ,40 323, ,65 QS08B ,00 343, ,25 QS08B ,90 363, ,89 QS08B ,10 384, ,56 QS08B ,30 404, ,28 QS08B ,70 444, ,81 QS08B ,90 460, ,46 QS08B ,20 485, ,49 QS08B ,30 505, ,38 QS08B1-125 Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 68 hain drives

71 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 10B-1 5/8 x 3/8 PLTE HEEL Tooth radius r 3 16 Radius width 1,6 Tooth width B 1 9,1 De d1 HIN 15,875 Internal witdth 9,65 Roller ø 10,16 B1 d 1 d ,00 41, ,09 QS10B ,60 46, ,12 QS10B ,50 51, ,14 QS10B ,00 56, ,17 QS10B ,00 61, ,21 QS10B ,00 66, ,24 QS10B ,00 71, ,28 QS10B ,00 76, ,32 QS10B ,00 81, ,37 QS10B ,00 86, ,41 QS10B ,30 91, ,46 QS10B ,30 96, ,52 QS10B ,40 101, ,57 QS10B ,40 106, ,63 QS10B ,00 111, ,69 QS10B ,50 116, ,76 QS10B ,30 121, ,83 QS10B ,00 126, ,90 QS10B ,00 131, ,96 QS10B ,00 136, ,04 QS10B ,70 141, ,12 QS10B ,80 146, ,20 QS10B ,80 151, ,29 QS10B ,90 156, ,38 QS10B ,90 161, ,47 QS10B ,50 167, ,56 QS10B ,00 172, ,66 QS10B ,10 177, ,76 QS10B ,10 182, ,85 QS10B ,20 187, ,96 QS10B ,20 192, ,06 QS10B ,20 197, ,18 QS10B ,30 202, ,29 QS10B ,80 207, ,41 QS10B ,90 212, ,53 QS10B ,90 217, ,65 QS10B ,00 222, ,77 QS10B ,00 227, ,90 QS10B ,10 232, ,03 QS10B ,10 237, ,17 QS10B ,20 242, ,32 QS10B ,20 247, ,44 QS10B ,30 252, ,59 QS10B ,30 257, ,73 QS10B ,40 262, ,88 QS10B ,40 267, ,03 QS10B ,50 273, ,19 QS10B ,50 278, ,34 QS10B ,60 283, ,49 QS10B ,00 288, ,65 QS10B ,70 293, ,82 QS10B ,70 298, ,99 QS10B ,80 303, ,16 QS10B ,40 313, ,51 QS10B ,50 323, ,87 QS10B ,50 328, ,06 QS10B ,60 333, ,25 QS10B ,70 343, ,64 QS10B ,80 353, ,03 QS10B ,90 363, ,44 QS10B ,10 379, ,08 QS10B ,10 384, ,30 QS10B ,20 394, ,74 QS10B ,30 404, ,20 QS10B ,60 429, ,37 QS10B ,80 454, ,63 QS10B ,50 480, ,97 QS10B ,40 505, ,37 QS10B ,90 555, ,40 QS10B ,10 576, ,69 QS10B ,40 606, ,71 QS10B ,70 631, ,47 QS10B1-125 Simplex Plate heel Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg hain drives 69

72 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 12B-1 3/4 x 7/16 PLTE HEEL Tooth radius r 3 19 Radius width 2 Tooth width B 1 11,1 De d1 HIN 19,05 Internal witdth 11,68 Roller ø 12,07 B1 d 1 d ,30 49, ,16 QS12B ,00 55, ,20 QS12B ,00 61, ,25 QS12B ,00 67, ,30 QS12B ,50 73, ,35 QS12B ,50 79, ,42 QS12B ,60 85, ,49 QS12B ,80 91, ,56 QS12B ,50 97, ,64 QS12B ,50 103, ,72 QS12B ,00 109, ,81 QS12B ,20 115, ,90 QS12B ,70 121, ,00 QS12B ,00 127, ,10 QS12B ,00 133, ,21 QS12B ,00 139, ,33 QS12B ,90 145, ,44 QS12B ,00 152, ,57 QS12B ,90 158, ,70 QS12B ,30 164, ,83 QS12B ,00 170, ,97 QS12B ,10 176, ,12 QS12B ,50 182, ,26 QS12B ,30 188, ,41 QS12B ,30 194, ,57 QS12B ,30 200, ,73 QS12B ,60 206, ,90 QS12B ,00 212, ,08 QS12B ,80 218, ,26 QS12B ,90 224, ,44 QS12B ,00 230, ,63 QS12B ,10 236, ,83 QS12B ,30 242, ,03 QS12B ,30 248, ,22 QS12B ,50 254, ,43 QS12B ,50 260, ,64 QS12B ,50 267, ,86 QS12B ,50 273, ,09 QS12B ,90 279, ,32 QS12B ,00 285, ,55 QS12B ,10 291, ,78 QS12B ,20 297, ,04 QS12B ,30 303, ,29 QS12B ,40 309, ,55 QS12B ,50 315, ,81 QS12B ,50 321, ,07 QS12B ,60 327, ,34 QS12B ,70 333, ,62 QS12B ,70 339, ,90 QS12B ,40 345, ,19 QS12B ,50 351, ,48 QS12B ,50 357, ,78 QS12B ,00 363, ,08 QS12B ,10 376, ,70 QS12B ,20 388, ,33 QS12B ,20 394, ,66 QS12B ,30 400, ,97 QS12B ,40 412, ,65 QS12B ,60 424, ,35 QS12B ,00 436, ,07 QS12B ,90 454, ,19 QS12B ,90 460, ,57 QS12B ,10 473, ,35 QS12B ,20 485, ,15 QS12B ,50 515, ,24 QS12B ,80 545, ,45 QS12B ,10 576, ,80 QS12B ,40 606, ,27 QS12B ,10 667, ,58 QS12B ,60 691, ,85 QS12B ,70 727, ,41 QS12B ,00 758, ,51 QS12B1-125 Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 70 hain drives

73 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 16B-1 1 x 17,02 mm PLTE HEEL Tooth radius r 3 26 Radius width 2,5 Tooth width B 1 16,2 De d1 HIN 25,4 Internal witdth 17,02 Roller ø 15,88 B1 d 1 d ,00 66, ,42 QS16B ,00 74, ,54 QS16B ,00 82, ,66 QS16B ,50 90, ,79 QS16B ,00 98, ,94 QS16B ,00 106, ,10 QS16B ,00 114, ,28 QS16B ,00 122, ,47 QS16B ,00 130, ,66 QS16B ,00 138, ,88 QS16B ,00 146, ,11 QS16B ,20 154, ,35 QS16B ,20 162, ,61 QS16B ,20 170, ,87 QS16B ,30 178, ,16 QS16B ,50 186, ,45 QS16B ,50 194, ,76 QS16B ,50 202, ,08 QS16B ,60 210, ,42 QS16B ,60 218, ,77 QS16B ,70 226, ,13 QS16B ,80 234, ,50 QS16B ,00 243, ,89 QS16B ,00 251, ,27 QS16B ,00 259, ,68 QS16B ,50 267, ,11 QS16B ,00 275, ,55 QS16B ,20 283, ,00 QS16B ,60 291, ,47 QS16B ,60 299, ,95 QS16B ,70 307, ,44 QS16B ,80 315, ,95 QS16B ,90 323, ,47 QS16B ,00 331, ,00 QS16B ,00 339, ,54 QS16B ,10 347, ,10 QS16B ,10 356, ,67 QS16B ,10 364, ,26 QS16B ,20 372, ,86 QS16B ,20 380, ,47 QS16B ,30 388, ,09 QS16B ,30 396, ,73 QS16B ,40 404, ,38 QS16B ,50 412, ,02 QS16B ,60 420, ,69 QS16B ,70 428, ,38 QS16B ,30 436, ,09 QS16B ,90 444, ,80 QS16B ,00 453, ,53 QS16B ,00 461, ,27 QS16B ,10 469, ,03 QS16B ,20 477, ,80 QS16B ,30 485, ,58 QS16B ,50 501, ,18 QS16B ,70 517, ,84 QS16B ,80 525, ,69 QS16B ,80 533, ,55 QS16B ,90 549, ,31 QS16B ,20 566, ,12 QS16B ,40 582, ,99 QS16B ,70 606, ,89 QS16B ,00 614, ,88 QS16B ,30 630, ,90 QS16B ,00 646, ,98 QS16B ,90 687, ,40 QS16B ,30 727, ,15 QS16B ,10 768, ,22 QS16B ,10 808, ,63 QS16B ,00 889, ,43 QS16B ,30 921, ,32 QS16B ,80 970, ,54 QS16B , , ,59 QS16B1-125 Simplex Plate heel Material: 45 (Fe360B with 31) External diameter mm diameter mm eight kg hain drives 71

74 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 20B-1 1 1/4 x 3/4 PLTE HEEL Tooth radius r 3 32 Radius width 3,5 Tooth width B 1 18,5 De d1 HIN 31,75 Internal witdth 19,56 Roller ø 19,05 B1 d 1 d ,10 82, ,76 QS20B ,00 92, ,96 QS20B ,90 102, ,18 QS20B ,80 112, ,42 QS20B ,80 122, ,68 QS20B ,80 132, ,97 QS20B ,80 142, ,29 QS20B ,90 152, ,63 QS20B ,90 162, ,99 QS20B ,90 172, ,38 QS20B ,00 182, ,79 QS20B ,10 192, ,22 QS20B ,10 202, ,68 QS20B ,20 213, ,13 QS20B ,30 223, ,64 QS20B ,30 233, ,16 QS20B ,40 243, ,71 QS20B ,50 253, ,29 QS20B ,60 263, ,89 QS20B ,60 273, ,51 QS20B ,70 283, ,1578 QS20B ,80 293, ,82 QS20B ,90 303, ,51 QS20B ,00 313, ,23 QS20B ,10 323, ,97 QS20B ,20 334, ,73 QS20B ,30 344, ,51 QS20B ,40 354, ,32 QS20B ,50 364, ,16 QS20B ,50 374, ,01 QS20B ,60 384, ,89 QS20B ,70 394, ,80 QS20B ,80 404, ,72 QS20B ,90 414, ,64 QS20B ,00 424, ,61 QS20B ,10 434, ,61 QS20B ,20 445, ,63 QS20B ,30 455, ,67 QS20B ,40 465, ,74 QS20B ,50 475, ,83 QS20B ,60 485, ,94 QS20B ,70 495, ,08 QS20B ,80 505, ,24 QS20B ,90 515, ,42 QS20B ,00 525, ,63 QS20B ,10 535, ,86 QS20B ,20 546, ,12 QS20B ,30 556, ,40 QS20B ,40 566, ,70 QS20B ,50 576, ,02 QS20B ,60 586, ,37 QS20B ,70 596, ,74 QS20B ,80 606, ,14 QS20B ,00 626, ,00 QS20B ,20 647, ,95 QS20B ,30 657, ,46 QS20B ,40 667, ,00 QS20B ,60 687, ,14 QS20B ,80 707, ,38 QS20B ,10 727, ,71 QS20B ,30 758, ,88 QS20B ,50 768, ,65 QS20B ,90 808, ,96 QS20B ,40 859, ,64 QS20B ,90 909, ,90 QS20B ,20 960, ,74 QS20B , , ,17 QS20B , , ,29 QS20B1-114 Material: 45 (Fe360B with 26) External diameter mm diameter mm eight kg 72 hain drives

75 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 24B-1 1 1/2 x 1 PLTE HEEL Tooth radius r 3 38 Radius width 4 Tooth width B 1 24,1 De d1 HIN 38,1 Internal witdth 25,4 Roller ø 25,4 B1 d 1 d ,00 99, ,42 QS24B ,40 111, ,79 QS24B ,00 123, ,21 QS24B ,00 135, ,67 QS24B ,00 147, ,18 QS24B ,20 159, ,72 QS24B ,20 171, ,32 QS24B ,20 183, ,96 QS24B ,30 195, ,61 QS24B ,30 207, ,33 QS24B ,30 219, ,10 QS24B ,50 231, ,91 QS24B ,60 243, ,77 QS24B ,60 255, ,67 QS24B ,70 267, ,62 QS24B ,80 279, ,61 QS24B ,80 291, ,64 QS24B ,00 304, ,72 QS24B ,00 316, ,80 QS24B ,20 328, ,97 QS24B ,20 340, ,17 QS24B ,30 352, ,43 QS24B ,50 364, ,73 QS24B ,60 376, ,07 QS24B ,70 388, ,45 QS24B ,80 400, ,88 QS24B ,80 412, ,36 QS24B ,00 425, ,87 QS24B ,00 437, ,44 QS24B ,20 449, ,04 QS24B ,20 461, ,69 QS24B ,50 473, ,39 QS24B ,60 485, ,12 QS24B ,60 497, ,90 QS24B ,70 509, ,73 QS24B ,80 521, ,60 QS24B ,00 534, ,51 QS24B ,20 546, ,47 QS24B ,30 558, ,47 QS24B ,40 570, ,52 QS24B ,40 582, ,60 QS24B ,50 594, ,74 QS24B ,70 606, ,92 QS24B ,80 618, ,14 QS24B ,00 631, ,40 QS24B ,00 643, ,71 QS24B ,20 655, ,07 QS24B ,30 667, ,47 QS24B ,40 679, ,90 QS24B ,50 691, ,39 QS24B ,60 703, ,92 QS24B ,70 715, ,49 QS24B ,80 727, ,10 QS24B ,20 752, ,37 QS24B ,30 776, ,91 QS24B ,40 788, ,75 QS24B ,60 800, ,63 QS24B ,80 824, ,53 QS24B ,20 849, ,59 QS24B ,40 873, ,84 QS24B ,80 909, ,54 QS24B ,90 921, ,87 QS24B ,40 970, ,58 QS24B , , ,73 QS24B , , ,31 QS24B1-095 Simplex Plate heel Material: 45 (Fe360B with 16) External diameter mm diameter mm eight kg hain drives 73

76 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 28B-1 1 3/4 x 1 1/4 PLTE HEEL Tooth radius r 3 44 Radius width 5 Tooth width B 1 29,4 De d1 HIN 44,45 Internal witdth 30,99 Roller ø 27,94 B1 d ,00 116, ,38 QS28B ,40 129, ,00 QS28B ,30 143, ,70 QS28B ,30 157, ,42 QS28B ,50 171, ,26 QS28B ,20 185, ,17 QS28B ,20 199, ,16 QS28B ,30 213, ,22 QS28B ,30 227, ,30 QS28B ,00 241, ,51 QS28B ,00 255, ,78 QS28B ,00 270, ,13 QS28B ,00 284, ,56 QS28B ,00 298, ,06 QS28B ,00 312, ,63 QS28B ,00 326, ,27 QS28B ,00 340, ,99 QS28B ,00 354, ,78 QS28B ,00 368, ,64 QS28B ,40 382, ,57 QS28B ,00 397, ,58 QS28B ,00 411, ,66 QS28B ,00 425, ,82 QS28B ,00 439, ,05 QS28B ,00 453, ,35 QS28B ,00 467, ,72 QS28B ,00 481, ,17 QS28B ,00 495, ,69 QS28B ,00 510, ,28 QS28B ,00 524, ,94 QS28B ,00 538, ,68 QS28B ,00 552, ,49 QS28B ,00 566, ,38 QS28B ,00 637, ,90 QS28B ,00 707, ,25 QS28B ,00 806, ,47 QS28B ,00 849, ,29 QS28B , , ,74 QS28B1-076 Material: 45 (Fe360B with 13) External diameter mm diameter mm eight kg 74 hain drives

77 Simplex Plate heel for chain according to DIN ISO/R 606 ISO 32B-1 2 x 1 1/4 PLTE HEEL Tooth radius r 3 51 Radius width 6 Tooth width B 1 29,4 De d1 HIN 50,8 Internal witdth 30,99 Roller ø 29,21 B1 d ,00 132, ,09 QS32B ,00 148, ,91 QS32B ,00 164, ,81 QS32B ,80 180, ,76 QS32B ,80 196, ,86 QS32B ,80 212, ,05 QS32B ,80 228, ,34 QS32B ,80 244, ,72 QS32B ,90 260, ,20 QS32B ,90 276, ,77 QS32B ,00 292, ,44 QS32B ,10 308, ,21 QS32B ,20 324, ,06 QS32B ,30 340, ,02 QS32B ,50 356, ,08 QS32B ,60 373, ,22 QS32B ,70 389, ,46 QS32B ,80 405, ,80 QS32B ,90 421, ,23 QS32B ,10 437, ,76 QS32B ,20 453, ,38 QS32B ,40 469, ,11 QS32B ,50 486, ,92 QS32B ,80 518, ,83 QS32B ,50 566, ,42 QS32B ,50 615, ,86 QS32B ,30 647, ,18 QS32B ,00 728, ,45 QS32B ,80 809, ,10 QS32B ,00 922, ,83 QS32B ,40 970, ,57 QS32B , , ,37 QS32B1-076 Simplex Plate heel Material: 45 (Fe360B with 12) External diameter mm diameter mm eight kg hain drives 75

78 DUPLEX PLTE HEELS Duplex Plate heel for chain according to DIN ISO/R 606 ISO 05B-2 8 x 3 mm PLTE HEEL Tooth radius r 3 8 Radius width 1 Tooth width b 1 2,7 Tooth width B 2 8,3 idth H (with 46) 4 De d2 H HIN 8 Internal witdth 3 Roller ø 5 b1 B2 d 2 d ,00 20,90 8 0,02 QD05B ,60 23,39 8 0,02 QD05B ,20 25,89 8 0,03 QD05B ,70 28,39 8 0,04 QD05B ,20 30,91 8 0,05 QD05B ,70 33,42 8 0,05 QD05B ,20 35,95 8 0,06 QD05B ,70 38,48 8 0,07 QD05B ,30 41, ,08 QD05B ,80 43, ,09 QD05B ,30 46, ,10 QD05B ,90 48, ,11 QD05B ,40 51, ,13 QD05B ,00 53, ,14 QD05B ,50 56, ,16 QD05B ,00 58, ,17 QD05B ,60 61, ,19 QD05B ,50 63, ,20 QD05B ,50 66, ,22 QD05B ,20 68, ,24 QD05B ,80 71, ,26 QD05B ,30 73, ,27 QD05B ,80 76, ,29 QD05B ,40 79, ,31 QD05B ,90 81, ,34 QD05B ,50 84, ,36 QD05B ,00 86, ,38 QD05B ,50 89, ,40 QD05B ,00 91, ,42 QD05B ,60 94, ,45 QD05B ,20 96, ,48 QD05B ,70 99, ,50 QD05B ,30 101, ,53 QD05B ,80 104, ,55 QD05B ,40 107, ,58 QD05B ,90 109, ,60 QD05B ,50 112, ,64 QD05B ,00 114, ,67 QD05B ,60 117, ,70 QD05B ,10 119, ,73 QD05B ,60 122, ,76 QD05B ,20 124, ,79 QD05B ,70 127, ,82 QD05B ,30 129, ,85 QD05B ,80 132, ,89 QD05B ,40 135, ,92 QD05B ,90 137, ,96 QD05B ,50 140, ,99 QD05B ,00 142, ,03 QD05B ,60 145, ,07 QD05B ,00 147, ,11 QD05B ,60 150, ,15 QD05B ,20 152, ,19 QD05B ,00 157, ,26 QD05B ,10 163, ,34 QD05B ,60 165, ,39 QD05B ,20 168, ,43 QD05B ,30 173, ,52 QD05B ,40 178, ,61 QD05B ,50 183, ,71 QD05B ,10 191, ,85 QD05B ,70 193, ,90 QD05B ,80 198, ,01 QD05B ,90 203, ,11 QD05B ,60 216, ,39 QD05B ,40 229, ,68 QD05B ,10 241, ,99 QD05B ,90 254, ,31 QD05B ,30 280, ,02 QD05B ,50 290, ,32 QD05B ,00 305, ,78 QD05B ,50 318, ,19 QD05B2-125 Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 76 hain drives

79 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 06B-2 3/8 x 7/32 PLTE HEEL Tooth radius r 3 10 Radius width 1 Tooth width b 1 5,2 Tooth width B 2 15,4 idth H (with 100) 7 De d2 H HIN 9,525 Internal witdth 5,72 Roller ø 6,35 b1 B2 d 2 d ,00 24,89 8 0,05 QD06B ,00 27,85 8 0,06 QD06B ,00 30,82 8 0,08 QD06B ,00 33, ,09 QD06B ,00 36, ,12 QD06B ,00 39, ,14 QD06B ,30 42, ,16 QD06B ,30 45, ,19 QD06B ,30 48, ,21 QD06B ,30 51, ,24 QD06B ,30 54, ,27 QD06B ,30 57, ,30 QD06B ,30 60, ,34 QD06B ,00 63, ,37 QD06B ,00 66, ,41 QD06B ,50 69, ,45 QD06B ,00 72, ,49 QD06B ,00 76, ,53 QD06B ,00 79, ,58 QD06B ,00 82, ,62 QD06B ,00 85, ,67 QD06B ,00 88, ,72 QD06B ,70 91, ,77 QD06B ,30 94, ,82 QD06B ,30 97, ,88 QD06B ,30 100, ,94 QD06B ,30 103, ,99 QD06B ,40 106, ,06 QD06B ,40 109, ,12 QD06B ,40 112, ,18 QD06B ,50 115, ,25 QD06B ,50 118, ,32 QD06B ,50 121, ,38 QD06B ,50 124, ,45 QD06B ,60 127, ,52 QD06B ,60 130, ,60 QD06B ,60 133, ,67 QD06B ,70 136, ,75 QD06B ,70 139, ,83 QD06B ,70 142, ,91 QD06B ,70 145, ,00 QD06B ,70 148, ,10 QD06B ,70 151, ,17 QD06B ,70 154, ,26 QD06B ,80 157, ,35 QD06B ,80 160, ,44 QD06B ,80 163, ,54 QD06B ,80 166, ,63 QD06B ,80 169, ,73 QD06B ,90 172, ,83 QD06B ,90 175, ,93 QD06B ,00 178, ,03 QD06B ,00 181, ,14 QD06B ,10 188, ,34 QD06B ,20 194, ,56 QD06B ,60 197, ,67 QD06B ,60 200, ,79 QD06B ,70 206, ,02 QD06B ,70 212, ,26 QD06B ,80 218, ,51 QD06B ,90 227, ,90 QD06B ,90 230, ,03 QD06B ,00 236, ,30 QD06B ,10 242, ,58 QD06B ,20 257, ,31 QD06B ,40 272, ,07 QD06B ,50 288, ,89 QD06B ,70 303, ,75 QD06B ,00 333, ,60 QD06B ,50 345, ,37 QD06B ,30 363, ,61 QD06B ,50 379, ,69 QD06B2-125 Duplex Plate heel Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg hain drives 77

80 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 08B-2 1/2 x 5/16 PLTE HEEL Tooth radius r 3 13 Radius width 1,3 Tooth width b 1 7 Tooth width B 2 21 De d2 HIN 12,7 Internal witdth 7,75 Roller ø 8,51 b1 B2 d 2 d ,00 33, ,13 QD08B ,00 37, ,16 QD08B ,20 41, ,20 QD08B ,70 45, ,25 QD08B ,00 49, ,30 QD08B ,40 53, ,35 QD08B ,80 57, ,41 QD08B ,50 61, ,47 QD08B ,50 65, ,53 QD08B ,60 69, ,60 QD08B ,80 73, ,67 QD08B ,70 77, ,75 QD08B ,80 81, ,84 QD08B ,70 85, ,91 QD08B ,80 89, ,00 QD08B ,20 93, ,10 QD08B ,80 97, ,20 QD08B ,80 101, ,30 QD08B ,00 105, ,41 QD08B ,00 109, ,52 QD08B ,00 113, ,64 QD08B ,00 117, ,76 QD08B ,10 121, ,89 QD08B ,20 125, ,02 QD08B ,30 129, ,15 QD08B ,40 133, ,29 QD08B ,60 137, ,43 QD08B ,70 141, ,58 QD08B ,00 145, ,71 QD08B ,60 149, ,87 QD08B ,60 153, ,03 QD08B ,70 157, ,19 QD08B ,80 161, ,36 QD08B ,40 165, ,53 QD08B ,40 169, ,71 QD08B ,70 173, ,89 QD08B ,80 178, ,07 QD08B ,00 182, ,26 QD08B ,10 186, ,46 QD08B ,20 190, ,65 QD08B ,30 194, ,86 QD08B ,30 198, ,06 QD08B ,30 202, ,27 QD08B ,10 206, ,46 QD08B ,10 210, ,68 QD08B ,20 214, ,90 QD08B ,10 218, ,13 QD08B ,10 222, ,36 QD08B ,20 226, ,60 QD08B ,40 230, ,84 QD08B ,50 234, ,08 QD08B ,50 238, ,33 QD08B ,60 242, ,59 QD08B ,90 250, ,11 QD08B ,10 258, ,64 QD08B ,00 262, ,92 QD08B ,00 266, ,20 QD08B ,00 274, ,77 QD08B ,00 283, ,35 QD08B ,20 291, ,96 QD08B ,20 303, ,90 QD08B ,30 307, ,22 QD08B ,40 315, ,88 QD08B ,40 323, ,55 QD08B ,00 343, ,30 QD08B ,90 363, ,17 QD08B ,10 384, ,14 QD08B ,30 404, ,21 QD08B ,70 444, ,69 QD08B ,90 460, ,59 QD08B ,20 485, ,58 QD08B ,30 505, ,19 QD08B2-125 Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 78 hain drives

81 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 10B-2 5/8 x 3/8 PLTE HEEL Tooth radius r 3 16 Radius width 1,6 Tooth width b 1 9 Tooth width B 2 25,5 De d2 HIN 15,875 Internal witdth 9,65 Roller ø 10,16 b1 B2 d 2 d ,00 41, ,25 QD10B ,60 46, ,32 QD10B ,50 51, ,40 QD10B ,00 56, ,48 QD10B ,00 61, ,57 QD10B ,00 66, ,68 QD10B ,00 71, ,78 QD10B ,00 76, ,89 QD10B ,00 81, ,02 QD10B ,00 86, ,15 QD10B ,30 91, ,29 QD10B ,30 96, ,44 QD10B ,40 101, ,60 QD10B ,40 106, ,75 QD10B ,00 111, ,92 QD10B ,50 116, ,10 QD10B ,30 121, ,29 QD10B ,00 126, ,49 QD10B ,00 131, ,70 QD10B ,00 136, ,91 QD10B ,70 141, ,13 QD10B ,80 146, ,37 QD10B ,80 151, ,60 QD10B ,90 156, ,83 QD10B ,90 161, ,08 QD10B ,50 167, ,34 QD10B ,00 172, ,62 QD10B ,10 177, ,90 QD10B ,10 182, ,18 QD10B ,20 187, ,48 QD10B ,20 192, ,78 QD10B ,20 197, ,09 QD10B ,30 202, ,41 QD10B ,80 207, ,74 QD10B ,90 212, ,07 QD10B ,90 217, ,42 QD10B ,00 222, ,77 QD10B ,00 227, ,13 QD10B ,10 232, ,46 QD10B ,10 237, ,84 QD10B ,20 242, ,22 QD10B ,20 247, ,61 QD10B ,30 252, ,01 QD10B ,30 257, ,42 QD10B ,40 262, ,83 QD10B ,40 267, ,26 QD10B ,50 273, ,69 QD10B ,50 278, ,13 QD10B ,60 283, ,58 QD10B ,00 288, ,04 QD10B ,70 293, ,50 QD10B ,70 298, ,97 QD10B ,80 303, ,45 QD10B ,40 313, ,44 QD10B ,50 323, ,46 QD10B ,50 328, ,98 QD10B ,60 333, ,51 QD10B ,70 343, ,59 QD10B ,80 353, ,71 QD10B ,90 363, ,85 QD10B ,10 379, ,63 QD10B ,10 384, ,24 QD10B ,20 394, ,49 QD10B ,30 404, ,77 QD10B ,60 429, ,06 QD10B ,80 454, ,59 QD10B ,50 480, ,33 QD10B ,40 505, ,27 QD10B ,90 555, ,75 QD10B ,10 576, ,37 QD10B ,40 606, ,04 QD10B ,70 631, ,95 QD10B2-125 Duplex Plate heel Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg hain drives 79

82 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 12B-2 3/4 x 7/16 PLTE HEEL Tooth radius r 3 19 Radius width 2 Tooth width b 1 10,8 Tooth width B 2 30,3 De d2 HIN 19,05 Internal witdth 11,68 Roller ø 12,07 b1 B2 d 2 d ,30 49, ,43 QD12B ,00 55, ,55 QD12B ,00 61, ,68 QD12B ,00 67, ,82 QD12B ,50 73, ,98 QD12B ,50 79, ,15 QD12B ,60 85, ,34 QD12B ,80 91, ,54 QD12B ,50 97, ,74 QD12B ,50 103, ,97 QD12B ,00 109, ,21 QD12B ,20 115, ,47 QD12B ,70 121, ,74 QD12B ,00 127, ,02 QD12B ,00 133, ,32 QD12B ,00 139, ,63 QD12B ,90 145, ,95 QD12B ,00 152, ,29 QD12B ,90 158, ,62 QD12B ,30 164, ,98 QD12B ,00 170, ,36 QD12B ,10 176, ,76 QD12B ,50 182, ,16 QD12B ,30 188, ,59 QD12B ,30 194, ,02 QD12B ,30 200, ,47 QD12B ,60 206, ,93 QD12B ,00 212, ,41 QD12B ,80 218, ,86 QD12B ,90 224, ,36 QD12B ,00 230, ,88 QD12B ,10 236, ,42 QD12B ,30 242, ,96 QD12B ,30 248, ,52 QD12B ,50 254, ,09 QD12B ,50 260, ,68 QD12B ,50 267, ,28 QD12B ,50 273, ,90 QD12B ,90 279, ,53 QD12B ,00 285, ,17 QD12B ,10 291, ,83 QD12B ,20 297, ,50 QD12B ,30 303, ,18 QD12B ,40 309, ,88 QD12B ,50 315, ,59 QD12B ,50 321, ,32 QD12B ,60 327, ,06 QD12B ,70 333, ,81 QD12B ,70 339, ,58 QD12B ,40 345, ,36 QD12B ,50 351, ,15 QD12B ,50 357, ,96 QD12B ,00 363, ,79 QD12B ,10 376, ,42 QD12B ,20 388, ,16 QD12B ,20 394, ,05 QD12B ,30 400, ,96 QD12B ,40 412, ,81 QD12B ,60 424, ,72 QD12B ,00 436, ,68 QD12B ,90 454, ,73 QD12B ,90 460, ,78 QD12B ,10 473, ,90 QD12B ,20 485, ,09 QD12B ,50 515, ,79 QD12B ,80 545, ,84 QD12B ,10 576, ,24 QD12B ,40 606, ,98 QD12B ,10 667, ,49 QD12B ,60 691, ,69 QD12B ,70 727, ,39 QD12B ,00 758, ,86 QD12B2-125 Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 80 hain drives

83 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 16B-2 1 x 17,02 mm PLTE HEEL Tooth radius r 3 26 Radius width 2,5 Tooth width b 1 15,8 Tooth width B 2 47,7 De d2 HIN 25,4 Internal witdth 17,02 Roller ø 15,88 b1 B2 d 2 d ,00 66, ,22 QD16B ,00 74, ,55 QD16B ,00 82, ,92 QD16B ,50 90, ,28 QD16B ,00 98, ,73 QD16B ,00 106, ,21 QD16B ,00 114, ,73 QD16B ,00 122, ,29 QD16B ,00 130, ,89 QD16B ,00 138, ,53 QD16B ,00 146, ,21 QD16B ,20 154, ,93 QD16B ,20 162, ,68 QD16B ,20 170, ,41 QD16B ,30 178, ,24 QD16B ,50 186, ,11 QD16B ,50 194, ,02 QD16B ,50 202, ,97 QD16B ,60 210, ,95 QD16B ,60 218, ,98 QD16B ,70 226, ,04 QD16B ,80 234, ,14 QD16B ,00 243, ,29 QD16B ,00 251, ,47 QD16B ,00 259, ,68 QD16B ,50 267, ,94 QD16B ,00 275, ,24 QD16B ,20 283, ,57 QD16B ,60 291, ,95 QD16B ,60 299, ,36 QD16B ,70 307, ,81 QD16B ,80 315, ,30 QD16B ,90 323, ,83 QD16B ,00 339, ,00 QD16B ,10 347, ,65 QD16B ,10 356, ,33 QD16B ,10 364, ,05 QD16B ,20 372, ,81 QD16B ,30 388, ,45 QD16B ,40 404, ,24 QD16B ,50 412, ,11 QD16B ,60 420, ,11 QD16B ,90 444, ,32 QD16B ,00 453, ,47 QD16B ,00 461, ,65 QD16B ,30 485, ,44 QD16B ,50 501, ,16 QD16B ,80 525, ,53 QD16B ,90 549, ,25 QD16B ,20 566, ,59 QD16B ,40 582, ,08 QD16B ,70 606, ,62 QD16B ,00 614, ,54 QD16B ,00 646, ,61 QD16B ,90 687, ,57 QD16B ,30 727, ,50 QD16B ,10 768, ,39 QD16B ,10 808, ,26 QD16B ,00 889, ,89 QD16B ,30 921, ,01 QD16B ,80 970, ,18 QD16B , , ,87 QD16B2-125 Duplex Plate heel Material: 45 (Fe360B with 22) External diameter mm diameter mm eight kg hain drives 81

84 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 20B-2 1 1/4 x 3/4 PLTE HEEL Tooth radius r 3 32 Radius width 3,5 Tooth width b 1 18,2 Tooth width B 2 54,6 De d2 HIN 31,75 Internal witdth 19,56 Roller ø 19,05 b1 B2 d 2 d ,10 82, ,19 QD20B ,00 92, ,78 QD20B ,90 102, ,44 QD20B ,80 112, ,16 QD20B ,80 122, ,96 QD20B ,80 132, ,82 QD20B ,80 142, ,76 QD20B ,90 152, ,76 QD20B ,90 162, ,76 QD20B ,90 172, ,90 QD20B ,00 182, ,11 QD20B ,10 192, ,39 QD20B ,10 202, ,74 QD20B ,20 213, ,16 QD20B ,30 223, ,65 QD20B ,30 233, ,206 QD20B ,40 243, ,83 QD20B ,50 253, ,52 QD20B ,60 263, ,29 QD20B ,60 273, ,12 QD20B ,70 283, ,02 QD20B ,80 293, ,00 QD20B ,90 303, ,04 QD20B ,00 313, ,15 QD20B ,10 323, ,33 QD20B ,20 334, ,58 QD20B ,30 344, ,90 QD20B ,40 354, ,29 QD20B ,50 364, ,65 QD20B ,50 374, ,18 QD20B ,60 384, ,77 QD20B ,70 394, ,44 QD20B ,80 404, ,17 QD20B ,00 424, ,84 QD20B ,30 455, ,88 QD20B ,40 465, ,02 QD20B ,60 485, ,53 QD20B ,80 505, ,31 QD20B ,00 525, ,37 QD20B ,30 556, ,47 QD20B ,50 576, ,22 QD20B ,80 606, ,37 QD20B ,30 657, ,00 QD20B ,80 707, ,35 QD20B ,50 768, ,67 QD20B ,90 808, ,25 QD20B ,20 960, ,09 QD20B , , ,24 QD20B2-114 Material: 45 (Fe360B with 18) External diameter mm diameter mm eight kg 82 hain drives

85 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 24B-2 1 1/2 x 1 PLTE HEEL Tooth radius r 3 38 Radius width 4 Tooth width b 1 23,6 Tooth width B 2 72 De d2 HIN 38,1 Internal witdth 25,4 Roller ø 25,4 b1 B2 d 2 d ,00 99, ,14 QD24B ,40 111, ,26 QD24B ,00 123, ,51 QD24B ,00 135, ,88 QD24B ,00 147, ,40 QD24B ,20 159, ,04 QD24B ,20 171, ,81 QD24B ,20 183, ,72 QD24B ,30 195, ,76 QD24B ,30 207, ,92 QD24B ,30 219, ,22 QD24B ,50 231, ,66 QD24B ,60 243, ,22 QD24B ,60 255, ,91 QD24B ,70 267, ,74 QD24B ,80 279, ,69 QD24B ,80 291, ,77 QD24B ,00 304, ,00 QD24B ,00 316, ,22 QD24B ,20 328, ,71 QD24B ,20 340, ,32 QD24B ,30 352, ,06 QD24B ,50 364, ,95 QD24B ,60 376, ,96 QD24B ,70 388, ,09 QD24B ,80 400, ,36 QD24B ,80 412, ,77 QD24B ,00 425, ,30 QD24B ,00 437, ,97 QD24B ,20 449, ,76 QD24B ,20 461, ,69 QD24B ,50 473, ,75 QD24B ,60 485, ,94 QD24B ,70 509, ,40 QD24B ,20 546, ,55 QD24B ,30 558, ,53 QD24B ,40 582, ,88 QD24B ,70 606, ,76 QD24B ,30 667, ,27 QD24B ,50 691, ,98 QD24B ,80 727, ,02 QD24B ,40 788, ,09 QD24B ,90 921, ,03 QD24B2-076 Duplex Plate heel Material: 45 (Fe360B with 16) External diameter mm diameter mm eight kg hain drives 83

86 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 28B-2 1 3/4 x 1 1/4 PLTE HEEL Tooth radius r 3 44 Radius width 5 Tooth width b 1 28,8 Tooth width B 2 88,4 De d2 HIN 44,45 Internal witdth 30,99 Roller ø 27,94 b1 B2 d ,00 116, ,05 QD28B ,40 129, ,92 QD28B ,30 143, ,00 QD28B ,30 157, ,30 QD28B ,50 171, ,83 QD28B ,20 185, ,57 QD28B ,20 199, ,54 QD28B ,30 213, ,72 QD28B ,30 227, ,97 QD28B ,00 241, ,60 QD28B ,00 255, ,44 QD28B ,00 270, ,50 QD28B ,00 284, ,79 QD28B ,00 298, ,29 QD28B ,00 312, ,01 QD28B ,00 326, ,95 QD28B ,00 340, ,11 QD28B ,00 354, ,49 QD28B ,00 368, ,09 QD28B ,40 382, ,91 QD28B ,00 397, ,95 QD28B ,00 411, ,21 QD28B ,00 425, ,68 QD28B ,00 439, ,39 QD28B ,00 453, ,30 QD28B ,00 467, ,44 QD28B ,00 481, ,80 QD28B ,00 495, ,37 QD28B ,00 510, ,17 QD28B ,00 524, ,18 QD28B ,00 538, ,42 QD28B ,00 552, ,87 QD28B ,00 566, ,55 QD28B ,00 637, ,22 QD28B ,00 707, ,37 QD28B ,00 806, ,22 QD28B ,00 849, ,77 QD28B , , ,67 QD28B2-076 Material: 45 (Fe360B with 13) External diameter mm diameter mm eight kg 84 hain drives

87 Duplex Plate heel for chain according to DIN ISO/R 606 ISO 32B-2 2 x 1 1/4 PLTE HEEL Tooth radius r 3 51 Radius width 6 Tooth width b 1 28,8 Tooth width B 2 87,4 De d2 HIN 50,8 Internal witdth 30,99 Roller ø 29,21 b1 B2 d ,00 148, ,6261 QD32B ,00 164, ,3248 QD32B ,80 180, ,1484 QD32B ,80 196, ,4061 QD32B ,80 212, ,9512 QD32B ,80 228, ,7739 QD32B ,80 244, ,8769 QD32B ,90 260, ,2834 QD32B ,90 276, ,9409 QD32B ,00 292, ,9238 QD32B ,10 308, ,1761 QD32B ,20 324, ,6887 QD32B ,30 340, ,5029 QD32B ,50 356, ,6180 QD32B ,60 373, ,9920 QD32B ,70 389, ,6472 QD32B ,80 405, ,6054 QD32B ,90 421, ,8283 QD32B ,10 437, ,3516 QD32B ,20 453, ,1332 QD32B ,50 486, ,5977 QD32B ,50 566, ,6788 QD32B ,50 615, ,7115 QD32B ,30 647, ,4821 QD32B ,00 728, ,7327 QD32B ,80 809, ,0833 QD32B ,00 922, ,2810 QD32B ,40 970, ,0533 QD32B , , ,6233 QD32B2-076 Duplex Plate heel Material: 45 (Fe360B with 12) External diameter mm diameter mm eight kg hain drives 85

88 TRIPLEX PLTE HEELS Triplex Plate heel for chain according to DIN ISO/R 606 ISO 06B-3 3/8 x 7/32 PLTE HEEL Tooth radius r 3 10 Radius width 1 Tooth width b 1 5,2 Tooth width B 3 25,6 idth H (with 100) 7 De d3 H HIN 9,525 Internal witdth 5,72 Roller ø 6,35 b1 B3 d 3 d ,00 24,89 8 0,09 QT06B ,00 27,85 8 0,11 QT06B ,00 30, ,13 QT06B ,00 33, ,16 QT06B ,00 36, ,19 QT06B ,00 39, ,23 QT06B ,30 42, ,26 QT06B ,30 45, ,31 QT06B ,30 48, ,35 QT06B ,30 51, ,40 QT06B ,30 54, ,45 QT06B ,30 57, ,50 QT06B ,30 60, ,56 QT06B ,00 63, ,61 QT06B ,00 66, ,68 QT06B ,50 69, ,74 QT06B ,00 72, ,81 QT06B ,00 76, ,88 QT06B ,00 79, ,96 QT06B ,00 82, ,03 QT06B ,00 85, ,11 QT06B ,00 88, ,20 QT06B ,70 91, ,28 QT06B ,30 94, ,36 QT06B ,30 97, ,45 QT06B ,30 100, ,55 QT06B ,30 103, ,65 QT06B ,40 106, ,75 QT06B ,40 109, ,85 QT06B ,40 112, ,96 QT06B ,50 115, ,07 QT06B ,50 118, ,18 QT06B ,50 121, ,30 QT06B ,50 124, ,41 QT06B ,60 127, ,53 QT06B ,60 130, ,66 QT06B ,60 133, ,79 QT06B ,70 136, ,92 QT06B ,70 139, ,05 QT06B ,70 142, ,18 QT06B ,70 145, ,32 QT06B ,70 148, ,46 QT06B ,70 151, ,61 QT06B ,70 154, ,73 QT06B ,80 157, ,88 QT06B ,80 160, ,04 QT06B ,80 163, ,19 QT06B ,80 166, ,35 QT06B ,80 169, ,52 QT06B ,90 172, ,68 QT06B ,90 175, ,85 QT06B ,00 178, ,02 QT06B ,00 181, ,19 QT06B ,10 188, ,55 QT06B ,20 194, ,92 QT06B ,60 197, ,11 QT06B ,60 200, ,26 QT06B ,70 206, ,65 QT06B ,70 212, ,05 QT06B ,80 218, ,47 QT06B ,90 227, ,11 QT06B ,90 230, ,33 QT06B ,00 236, ,78 QT06B ,10 242, ,24 QT06B ,20 257, ,45 QT06B ,40 272, ,73 QT06B ,50 288, ,08 QT06B ,70 303, ,50 QT06B ,00 333, ,57 QT06B ,50 345, ,88 QT06B ,30 363, ,93 QT06B ,50 379, ,71 QT06B3-125 Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 86 hain drives

89 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 08B-3 1/2 x 5/16 PLTE HEEL Tooth radius r 3 13 Radius width 1,3 Tooth width b 1 7 Tooth width B 3 34,9 De d3 HIN 12,7 Internal witdth 7,75 Roller ø 8,51 b1 B3 d 3 d ,00 33, ,21 QT08B ,00 37, ,27 QT08B ,20 41, ,34 QT08B ,70 45, ,40 QT08B ,00 49, ,49 QT08B ,40 53, ,57 QT08B ,80 57, ,67 QT08B ,50 61, ,77 QT08B ,50 65, ,86 QT08B ,60 69, ,97 QT08B ,80 73, ,10 QT08B ,70 77, ,23 QT08B ,80 81, ,37 QT08B ,70 85, ,51 QT08B ,80 89, ,66 QT08B ,20 93, ,82 QT08B ,80 97, ,99 QT08B ,80 101, ,16 QT08B ,00 105, ,34 QT08B ,00 109, ,53 QT08B ,00 113, ,73 QT08B ,00 117, ,93 QT08B ,10 121, ,14 QT08B ,20 125, ,32 QT08B ,30 129, ,54 QT08B ,40 133, ,77 QT08B ,60 137, ,01 QT08B ,70 141, ,26 QT08B ,00 145, ,51 QT08B ,60 149, ,77 QT08B ,60 153, ,03 QT08B ,70 157, ,30 QT08B ,80 161, ,58 QT08B ,40 165, ,82 QT08B ,40 169, ,11 QT08B ,70 173, ,41 QT08B ,80 178, ,72 QT08B ,00 182, ,04 QT08B ,10 186, ,36 QT08B ,20 190, ,69 QT08B ,30 194, ,02 QT08B ,30 198, ,37 QT08B ,30 202, ,72 QT08B ,10 206, ,08 QT08B ,10 210, ,44 QT08B ,20 214, ,81 QT08B ,10 218, ,19 QT08B ,10 222, ,58 QT08B ,20 226, ,97 QT08B ,40 230, ,37 QT08B ,50 234, ,78 QT08B ,50 238, ,19 QT08B ,60 242, ,61 QT08B ,90 250, ,47 QT08B ,10 258, ,36 QT08B ,00 262, ,82 QT08B ,00 266, ,29 QT08B ,00 274, ,23 QT08B ,00 283, ,21 QT08B ,20 291, ,22 QT08B ,20 303, ,78 QT08B ,30 307, ,31 QT08B ,40 315, ,40 QT08B ,40 323, ,52 QT08B ,00 343, ,44 QT08B ,90 363, ,53 QT08B ,10 384, ,81 QT08B ,30 404, ,26 QT08B ,70 444, ,69 QT08B ,90 460, ,86 QT08B ,20 485, ,83 QT08B ,30 505, ,16 QT08B3-125 Triplex Plate heel Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg hain drives 87

90 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 10B-3 5/8 x 3/8 PLTE HEEL Tooth radius r 3 16 Radius width 1,6 Tooth width b 1 9 Tooth width B 3 42,1 De d3 HIN 15,875 Internal witdth 9,65 Roller ø 10,16 b1 B3 d 3 d ,00 41, ,41 QT10B ,60 46, ,53 QT10B ,50 51, ,65 QT10B ,00 56, ,79 QT10B ,00 61, ,95 QT10B ,00 66, ,11 QT10B ,00 71, ,29 QT10B ,00 76, ,49 QT10B ,00 81, ,66 QT10B ,00 86, ,88 QT10B ,30 91, ,12 QT10B ,30 96, ,36 QT10B ,40 101, ,62 QT10B ,40 106, ,90 QT10B ,00 111, ,18 QT10B ,50 116, ,48 QT10B ,30 121, ,80 QT10B ,00 126, ,12 QT10B ,00 131, ,43 QT10B ,00 136, ,78 QT10B ,70 141, ,15 QT10B ,80 146, ,53 QT10B ,80 151, ,92 QT10B ,90 156, ,33 QT10B ,90 161, ,75 QT10B ,50 167, ,18 QT10B ,00 172, ,63 QT10B ,10 177, ,09 QT10B ,10 182, ,50 QT10B ,20 187, ,99 QT10B ,20 192, ,49 QT10B ,20 197, ,00 QT10B ,30 202, ,53 QT10B ,80 207, ,07 QT10B ,90 212, ,62 QT10B ,90 217, ,19 QT10B ,00 222, ,77 QT10B ,00 227, ,37 QT10B ,10 232, ,97 QT10B ,10 237, ,59 QT10B ,20 242, ,23 QT10B ,20 247, ,87 QT10B ,30 252, ,53 QT10B ,30 257, ,21 QT10B ,40 262, ,89 QT10B ,40 267, ,59 QT10B ,50 273, ,31 QT10B ,50 278, ,04 QT10B ,60 283, ,78 QT10B ,00 288, ,53 QT10B ,70 293, ,30 QT10B ,70 298, ,08 QT10B ,80 303, ,87 QT10B ,40 313, ,43 QT10B ,50 323, ,11 QT10B ,50 328, ,97 QT10B ,60 333, ,84 QT10B ,70 343, ,63 QT10B ,80 353, ,47 QT10B ,90 363, ,36 QT10B ,10 379, ,31 QT10B ,10 384, ,31 QT10B ,20 394, ,37 QT10B ,30 404, ,48 QT10B ,60 429, ,98 QT10B ,80 454, ,81 QT10B ,50 480, ,98 QT10B ,40 505, ,49 QT10B ,90 555, ,49 QT10B ,10 576, ,47 QT10B ,40 606, ,84 QT10B ,70 631, ,94 QT10B3-125 Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg 88 hain drives

91 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 12B-3 3/4 x 7/16 PLTE HEEL Tooth radius r 3 19 Radius width 2 Tooth width b 1 10,8 Tooth width B 3 49,8 De d3 HIN 19,05 Internal witdth 11,68 Roller ø 12,07 b1 B3 d 3 d ,30 49, ,72 QT12B ,00 55, ,91 QT12B ,00 61, ,13 QT12B ,00 67, ,33 QT12B ,50 73, ,59 QT12B ,50 79, ,88 QT12B ,60 85, ,19 QT12B ,80 91, ,52 QT12B ,50 97, ,87 QT12B ,50 103, ,24 QT12B ,00 109, ,64 QT12B ,20 115, ,06 QT12B ,70 121, ,50 QT12B ,00 127, ,92 QT12B ,00 133, ,41 QT12B ,00 139, ,92 QT12B ,90 145, ,46 QT12B ,00 152, ,02 QT12B ,90 158, ,59 QT12B ,30 164, ,20 QT12B ,00 170, ,82 QT12B ,10 176, ,47 QT12B ,50 182, ,14 QT12B ,30 188, ,76 QT12B ,30 194, ,48 QT12B ,30 200, ,22 QT12B ,60 206, ,98 QT12B ,00 212, ,76 QT12B ,80 218, ,57 QT12B ,90 224, ,40 QT12B ,00 230, ,25 QT12B ,10 236, ,13 QT12B ,30 242, ,02 QT12B ,30 248, ,94 QT12B ,50 254, ,89 QT12B ,50 260, ,85 QT12B ,50 267, ,84 QT12B ,50 273, ,85 QT12B ,90 279, ,88 QT12B ,00 285, ,94 QT12B ,10 291, ,02 QT12B ,20 297, ,12 QT12B ,30 303, ,25 QT12B ,40 309, ,40 QT12B ,50 315, ,57 QT12B ,50 321, ,76 QT12B ,60 327, ,97 QT12B ,70 333, ,21 QT12B ,70 339, ,39 QT12B ,40 345, ,67 QT12B ,50 351, ,98 QT12B ,50 357, ,31 QT12B ,00 363, ,66 QT12B ,10 376, ,43 QT12B ,20 388, ,30 QT12B ,20 394, ,76 QT12B ,30 400, ,25 QT12B ,40 412, ,30 QT12B ,60 424, ,43 QT12B ,00 436, ,66 QT12B ,90 454, ,67 QT12B ,90 460, ,38 QT12B ,10 473, ,88 QT12B ,20 485, ,47 QT12B ,50 515, ,85 QT12B ,80 545, ,79 QT12B ,10 576, ,30 QT12B ,40 606, ,37 QT12B ,10 667, ,23 QT12B ,60 691, ,41 QT12B ,70 727, ,37 QT12B ,00 758, ,29 QT12B3-125 Triplex Plate heel Material: 45 (Fe360B with 41) External diameter mm diameter mm eight kg hain drives 89

92 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 16B-3 1 x 17,02 mm PLTE HEEL Tooth radius r 3 26 Radius width 2,5 Tooth width b 1 15,8 Tooth width B 3 79,6 De d3 HIN 25,4 Internal witdth 17,02 Roller ø 15,88 b1 B3 d 3 d ,00 66, ,05 QT16B ,00 74, ,60 QT16B ,00 82, ,21 QT16B ,50 90, ,82 QT16B ,00 98, ,56 QT16B ,00 106, ,36 QT16B ,00 114, ,24 QT16B ,00 122, ,17 QT16B ,00 130, ,06 QT16B ,00 138, ,13 QT16B ,00 146, ,26 QT16B ,20 154, ,45 QT16B ,20 162, ,71 QT16B ,20 170, ,04 QT16B ,30 178, ,42 QT16B ,50 186, ,88 QT16B ,50 194, ,39 QT16B ,50 202, ,98 QT16B ,60 210, ,49 QT16B ,60 218, ,20 QT16B ,70 226, ,97 QT16B ,80 234, ,81 QT16B ,00 243, ,72 QT16B ,00 251, ,69 QT16B ,00 259, ,72 QT16B ,50 267, ,82 QT16B ,00 275, ,98 QT16B ,20 283, ,21 QT16B ,60 291, ,51 QT16B ,60 299, ,86 QT16B ,70 307, ,28 QT16B ,80 315, ,77 QT16B ,90 323, ,32 QT16B ,00 339, ,61 QT16B ,10 356, ,17 QT16B ,10 364, ,04 QT16B ,20 372, ,98 QT16B ,30 388, ,05 QT16B ,40 404, ,37 QT16B ,50 412, ,29 QT16B ,60 420, ,61 QT16B ,90 444, ,98 QT16B ,00 461, ,21 QT16B ,30 485, ,54 QT16B ,80 525, ,72 QT16B ,90 549, ,60 QT16B ,20 566, ,51 QT16B ,40 582, ,68 QT16B ,70 606, ,92 QT16B ,00 614, ,79 QT16B ,00 646, ,94 QT16B ,90 687, ,58 QT16B ,30 727, ,82 QT16B ,10 768, ,68 QT16B ,10 808, ,16 QT16B ,00 889, ,96 QT16B ,30 921, ,88 QT16B ,80 970, ,22 QT16B , , ,76 QT16B3-125 Material: 45 (Fe360B with 21) External diameter mm diameter mm eight kg 90 hain drives

93 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 20B-3 1 1/4 x 3/4 PLTE HEEL Tooth radius r 3 32 Radius width 3,5 Tooth width b 1 18,2 Tooth width B 3 91 De d3 HIN 31,75 Internal witdth 19,56 Roller ø 19,05 b1 B3 d 3 d ,10 82, ,66 QT20B ,00 92, ,64 QT20B ,90 102, ,73 QT20B ,80 112, ,94 QT20B ,80 122, ,27 QT20B ,80 132, ,71 QT20B ,80 142, ,27 QT20B ,90 152, ,94 QT20B ,90 162, ,60 QT20B ,90 172, ,50 QT20B ,00 182, ,52 QT20B ,10 192, ,66 QT20B ,10 202, ,91 QT20B ,20 213, ,27 QT20B ,30 223, ,75 QT20B ,30 233, ,34 QT20B ,40 243, ,05 QT20B ,50 253, ,88 QT20B ,60 263, ,82 QT20B ,60 273, ,88 QT20B ,70 283, ,05 QT20B ,80 293, ,33 QT20B ,90 303, ,74 QT20B ,00 313, ,11 QT20B ,10 323, ,73 QT20B ,20 334, ,48 QT20B ,30 344, ,35 QT20B ,40 354, ,33 QT20B ,50 364, ,43 QT20B ,50 374, ,63 QT20B ,60 384, ,96 QT20B ,70 394, ,40 QT20B ,80 404, ,96 QT20B ,00 424, ,01 QT20B ,30 455, ,07 QT20B ,40 465, ,31 QT20B ,60 485, ,16 QT20B ,80 505, ,46 QT20B ,00 525, ,23 QT20B ,30 556, ,74 QT20B ,50 576, ,65 QT20B ,80 606, ,90 QT20B ,30 657, ,94 QT20B ,80 707, ,87 QT20B ,50 768, ,40 QT20B ,90 808, ,37 QT20B ,20 960, ,76 QT20B , , ,75 QT20B3-114 Triplex Plate heel Material: 45 (Fe360B with 18) External diameter mm diameter mm eight kg hain drives 91

94 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 24B-3 1 1/2 x 1 PLTE HEEL Tooth radius r 3 38 Radius width 4 Tooth width b 1 23,6 Tooth width B 3 120,3 De d3 HIN 38,1 Internal witdth 25,4 Roller ø 25,4 b1 B3 d 3 d ,00 99, ,93 QT24B ,40 111, ,80 QT24B ,00 123, ,88 QT24B ,00 135, ,18 QT24B ,00 147, ,71 QT24B ,20 159, ,45 QT24B ,20 171, ,42 QT24B ,20 183, ,60 QT24B ,30 195, ,00 QT24B ,30 207, ,62 QT24B ,30 219, ,47 QT24B ,50 231, ,53 QT24B ,60 243, ,82 QT24B ,60 255, ,11 QT24B ,70 267, ,83 QT24B ,80 279, ,76 QT24B ,80 291, ,92 QT24B ,00 304, ,31 QT24B ,00 316, ,90 QT24B ,20 328, ,72 QT24B ,20 340, ,75 QT24B ,30 352, ,01 QT24B ,50 364, ,98 QT24B ,60 376, ,68 QT24B ,70 388, ,57 QT24B ,80 400, ,72 QT24B ,80 412, ,08 QT24B ,00 425, ,65 QT24B ,00 437, ,45 QT24B ,20 449, ,47 QT24B ,20 461, ,70 QT24B ,50 473, ,15 QT24B ,60 485, ,83 QT24B ,70 509, ,82 QT24B ,20 546, ,48 QT24B ,30 558, ,46 QT24B ,40 582, ,11 QT24B ,70 606, ,62 QT24B ,30 667, ,28 QT24B ,50 691, ,86 QT24B ,80 727, ,36 QT24B ,40 788, ,98 QT24B ,90 921, ,30 QT24B3-076 Material: 45 (Fe360B with 16) External diameter mm diameter mm eight kg 92 hain drives

95 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 28B-3 1 3/4 x 1 1/4 PLTE HEEL Tooth radius r 3 44 Radius width 5 Tooth width b 1 28,8 Tooth width B De d3 HIN 44,45 Internal witdth 30,99 Roller ø 27,94 b1 B3 d ,00 116, ,81 QT28B ,40 129, ,94 QT28B ,30 143, ,43 QT28B ,30 157, ,03 QT28B ,50 171, ,26 QT28B ,20 185, ,85 QT28B ,20 199, ,82 QT28B ,30 213, ,14 QT28B ,30 227, ,84 QT28B ,00 241, ,91 QT28B ,00 255, ,35 QT28B ,00 270, ,15 QT28B ,00 284, ,32 QT28B ,00 298, ,85 QT28B ,00 312, ,76 QT28B ,00 326, ,03 QT28B ,00 340, ,67 QT28B ,00 354, ,04 QT28B ,00 368, ,41 QT28B ,40 382, ,15 QT28B ,00 397, ,26 QT28B ,00 411, ,74 QT28B ,00 425, ,58 QT28B ,00 439, ,80 QT28B ,00 453, ,38 QT28B ,00 467, ,33 QT28B ,00 481, ,65 QT28B ,00 495, ,33 QT28B ,00 510, ,39 QT28B ,00 524, ,81 QT28B ,00 538, ,59 QT28B ,00 552, ,74 QT28B ,00 566, ,27 QT28B ,00 637, ,40 QT28B ,00 707, ,72 QT28B ,00 806, ,40 QT28B ,00 849, ,93 QT28B , , ,91 QT28B3-076 Triplex Plate heel Material: 45 (Fe360B with 13) External diameter mm diameter mm eight kg hain drives 93

96 Triplex Plate heel for chain according to DIN ISO/R 606 ISO 32B-3 2 x 1 1/4 PLTE HEEL Tooth radius r 3 51 Radius width 6 Tooth width b 1 28,8 Tooth width B De d3 HIN 50,8 Internal witdth 30,99 Roller ø 29,21 b1 B3 d ,00 132, ,38 QT32B ,00 148, ,42 QT32B ,00 164, ,93 QT32B ,80 180, ,65 QT32B ,80 196, ,09 QT32B ,80 212, ,01 QT32B ,80 228, ,40 QT32B ,80 244, ,25 QT32B ,90 260, ,61 QT32B ,90 276, ,39 QT32B ,00 292, ,71 QT32B ,10 308, ,49 QT32B ,20 324, ,70 QT32B ,30 340, ,78 QT32B ,50 356, ,99 QT32B ,60 373, ,64 QT32B ,70 389, ,76 QT32B ,80 405, ,38 QT32B ,90 421, ,45 QT32B ,10 437, ,01 QT32B ,20 453, ,01 QT32B ,50 486, ,52 QT32B ,50 566, ,49 QT32B ,50 615, ,33 QT32B ,30 647, ,33 QT32B ,00 728, ,98 QT32B ,80 809, ,49 QT32B ,00 922, ,89 QT32B ,40 970, ,03 QT32B , , ,49 QT32B3-076 Material: 45 (Fe360B with 12) External diameter mm diameter mm eight kg 94 hain drives

97 Idler sprockets with ball bearing IDLER SPROKETS

98 INDEX Idler sprockets with ball bearing Page Idler sprockets Idler sprockets with ball bearing 97

99 Idler sprockets with ball bearing h h h Ø De Ø Ø F Ø D1 Ø P Ø De Ø Ø F Ø D1 B B H H Fig.1 Fig. 2 Idler Sprockets ISO D 1 F B H h Idler sprocket Fig. 05 B1 8 x 3 mm 23 62,2 58, ,3 2,8 7,0 QTS05B B1 3/8 x 7/ ,0 63, ,3 5,3 7,0 QTS06B /2 x 1/ ,9 73, ,3 3,0 7,0 QTS /2 x 3/ ,9 73, ,3 4,5 7,0 QTS B1 1/2 x 5/ ,5 65, ,3-7,2 QTS08B B1 1/2 x 5/ ,8 73, ,3-7,2 QTS08B B1 5/8 x 3/ ,0 71, ,3-9,1 QTS10B B1 5/8 x 3/ ,0 76, ,3-9,1 QTS10B B1 5/8 x 3/ ,0 86, ,3-9,1 QTS10B B1 3/4 x 7/ ,5 79, ,3-11,1 QTS12B B1 3/4 x 7/ ,8 91, ,3-11,1 QTS12B B1 1 x 17,02 mm ,0 98, ,7-16,2 QTS16B B1 1 1/4 x 3/ ,8 132, ,5 QTS20B Number of teeth External diameter mm diameter mm hain drives 97

100

101 Simplex, duplex and triplex chains Special chains HINS

102 INDEX HINS Pag. hains hain components 101 Roller hains Transmission roller chains -British Standard DIN 8187 ISO/R 102 Transmission roller chains - merican Standard ISO/R DIN 8188 NSI B Transport hains Types of transport chains How to find the right conveyor chain size Non-standard metric pitch chains with solid pins + attachments Non-standard metric pitch chains with hollow pins 114 Hollow pin chains - Profiled plates 115 Non-standard metric pitch chains with eccentric rollers 115 urved conveyor chains 116 onveyor chains BS 4116 in inch pitch with solid pins + attachments onveyor chains BS 4116 in inch pitch with hollow pins 119 onveyor chains BS 4116 in inch pitch with eccentric rollers 120 onveyor chains British Standard ISO DIN 8167 with solid pins + attachments onveyor chains British Standard ISO DIN 8167 with hollow pins 123 onveyor chains British Standard ISO DIN 8167 with eccentric rollers 124 onveyor chains British Standard ISO DIN 8167 with scraping plates 125 onveyor chains Standard DIN 8165 with solid pins + attachments onveyor chains Standard DIN 8165 with hollow pins 128 onveyor chains Standard DIN 8165 with eccentric rollers 129 onveyor chains Standard DIN 8165 with scraping plates 130 Malleable cast iron chains for case conveyors 131 onveyor chains for bricks and tiles 132 onveyor steel chains for cases 132 Pressed steel chains for overhead conveyors - removable links 133 Trolleys of pressed steel for chains 134

103 hain components The roller chain is fabricated according to ISO/DIN/BS Standards and it consists of five components: Bushing Roller Inner plate Outer plate Pin onnecting link with spring clip vailable from 05B to 16B. The standard closing plate has been designed for sliding assembly on pins. Positioning is provided by a flat steel spring clip with a split end to allow the installation in the pin side slots. Inner links Standard links for all roller chain sizes. They are supplied fully assembled. The two bushings are pressed into the single joint plates. The inner links are used for single or multiple chains. Offset link with one roller vailable for single, double and triple strand chains. The flat milled surface on one pin end prevents plate rotation onnecting links with split pin vailable from 20B to 32B. The closing plate can be pressed or made to slide on the pins. Pressure joints are recommended for heavy duty. Pressure closing plates are standard in multiple chains used in the oil industry. hains hain packages Length in meters (Standard): Box, 5 m Rollers, 25, 50 or 100 m ut sizes (upon request): Open Ready to be closed by connecting links losed by connecting links losed by rivets 101

104 TRNSMISSION ROLLER HIN Transmission roller chain British Standard DIN 8187 ISO/R 606 vailable models: ith flat profile plates ( -Type) Nickel-plated, inc-plated Stainless steel ISI 304 ISO Standard Standard size p Inner width b1 Roller diameter Dr Pin diameter Pin length l1-l2-l3 Pin length G. c1-c2-c3 g max e Min. ultimate strength [N] eight [kg/m] SIMPLEX DUPLEX TRIPLEX 04 B1 6 x 2,8 mm 6,00 2,80 4,00 1,85 7,40 10,30 5, ,12 05 B1 8 x 3 mm 8,00 3,00 5,00 2,31 8,60 11,70 7, ,18 06 B1 * 3/8" x 7/32" 9,53 5,72 6,35 3,28 13,50 16,80 8, , /2" x 1/8" 12,70 3,30 7,75 3,66 10,20 11,70 9, , /2" x 3/32" 12,70 2,38 7,75 3,66 8,20-10, , /2" x 3/16" 12,70 4,88 7,75 4,09 12,90 14,40 10, , /2" x 3/16" 12,70 4,88 7,75 4,09 14,80 16,30 11, ,59 08 B1 1/2" x 5/16" 12,70 7,75 8,51 4,45 17,00 20,90 11, ,70 10 B1 5/8" x 3/8" 15,88 9,65 10,16 5,08 19,60 23,70 14, ,95 12 B1 3/4" x 7/16" 19,05 11,68 12,07 5,72 22,70 27,30 16, ,25 16 B1 1" x 17,02 mm 25,40 17,02 15,88 8,28 36,10 41,50 21, ,70 20 B1 1"1/4 x 3/4" 31,75 19,56 19,05 10,19 43,20 49,30 26, ,60 24 B1 1"1/2 x 1" 38,10 25,40 25,40 14,63 53,40 60,00 33, ,70 28 B1 1"3/4 x 1"1/4 44,45 30,99 27,94 15,90 65,10 72,50 37, ,30 32 B1 2" x 1"1/4 50,80 30,99 29,21 17,81 67,40 75,30 42, ,50 40 B1 2"1/2 x 1"1/2 63,50 38,10 39,37 22,89 82,60 92,60 52, ,00 48 B1 3" x 1"3/4 76,20 45,72 48,26 29,24 99,10 109,10 63, ,00 06 B2 * 3/8" x 7/32" 9,53 5,72 6,35 3,28 23,80 27,10 8,20 10, ,78 08 B2 1/2" x 5/16" 12,70 7,75 8,51 4,45 31,00 34,90 11,80 13, ,35 10 B2 5/8" x 3/8" 15,88 9,65 10,16 5,08 36,20 40,30 14,70 16, ,80 12 B2 3/4" x 7/16" 19,05 11,68 12,07 5,72 42,20 46,80 16,10 19, ,50 16 B2 1" x 17,02 mm 25,40 17,02 15,88 8,28 68,00 73,40 21,00 31, ,40 20 B2 1"1/4 x 3/4" 31,75 19,56 19,05 10,19 79,70 85,80 26,40 36, ,40 24 B2 1"1/2 x 1" 38,10 25,40 25,40 14,63 101,80 108,40 33,40 48, ,75 28 B2 1"3/4 x 1"1/4 44,45 30,99 27,94 15,90 124,70 132,10 37,00 59, ,30 32 B2 2" x 1"1/4 50,80 30,99 29,21 17,81 126,00 133,90 42,20 58, ,00 40 B2 2"1/2 x 1"1/2 63,50 38,10 39,37 22,89 154,90 164,90 52,90 72, ,00 48 B2 3" x 1"3/4 76,20 45,72 48,26 29,24 190,00 200,00 63,80 91, ,60 06 B3 * 3/8" x 7/32" 9,53 5,72 6,35 3,28 34,00 37,30 8,20 10, ,18 08 B3 1/2" x 5/16" 12,70 7,75 8,51 4,45 44,90 47,80 11,80 13, ,00 10 B3 5/8" x 3/8" 15,88 9,65 10,16 5,08 52,80 56,90 14,70 16, ,80 12 B3 3/4" x 7/16" 19,05 11,68 12,07 5,72 61,70 66,30 16,10 19, ,80 16 B3 1" x 17,02 mm 25,40 17,02 15,88 8,28 99,90 105,30 21,00 31, ,20 20 B3 1"1/4 x 3/4" 31,75 19,56 19,05 10,19 116,00 122,10 26,40 36, ,80 24 B3 1"1/2 x 1" 38,10 25,40 25,40 14,63 150,00 156,60 33,40 48, ,00 28 B3 1"3/4 x 1"1/4 44,45 30,99 27,94 15,90 184,30 191,70 37,00 59, ,75 32 B3 2" x 1"1/4 50,80 30,99 29,21 17,81 184,50 192,40 42,20 58, ,85 40 B3 2"1/2 x 1"1/2 63,50 38,10 39,37 22,89 227,00 237,00 52,90 72, ,80 48 B3 3" x 1"3/4 76,20 45,72 48,26 29,24 281,60 291,60 63,80 91, ,50 * = vailable only with flat profile plates ( -Type) 102

105 Transmission roller chains - merican Standard ISO R/606 DIN NSI B29.1 The chains from series NSI 25 to NSI 50 are only available in riveted model; from series NSI 60 onwards they are available also with split pin, upon request. vailable models: ith flat profile plates ( -Type) Nickel-plated, inc-plated Stainless steel ISI 304 ll transmission roller chains, both British and merican Standards, can be supplied, upon request, with vertical attachments, square attachments, with one or two holes and with projecting pins. NSI Standard Standard size p Inner width b1 Roller diameter Dr Pin diameter Pin length l Pin length G. c g max Plate thickness T e verage ultimate strength [N] 25 1/4" x 1/8" 6,35 3,18 3,30 * 2,29 8,64 9,40 0, , /4" x 1/8" duplex 6,35 3,18 3,30 * 2,29 14,99 16,00 0,76 6, , /4" x 1/8" triplex 6,35 3,18 3,30 * 2,29 21,34 22,35 0,76 6, , /8" x 3/16" 9,53 4,76 5,08* 3,58 12,70 14,22 8,60 1, , /8" x 3/16" duplex 9,53 4,76 5,08* 3,58 22,86 24,38 8,60 1,27 10, , /8" x 3/16" triplex 9,53 4,76 5,08* 3,58 33,27 34,54 8,60 1,27 10, , /8" x 3/16" quad. 9,53 4,76 5,08* 3,58 43,18 44,70 8,60 1,27 10, , /8" x 3/16" quint. 9,53 4,76 5,08* 3,58 53,59 54,86 8,60 1,27 10, , /8" x 3/16" sext. 9,53 4,76 5,08* 3,58 63,75 65,28 8,60 1,27 10, , /2" x 5/16" 12,70 7,94 7,93 3,96 17,02 18,29 11,40 1, , /2" x 5/16" duplex 12,70 7,94 7,93 3,96 31,50 32,77 11,40 1,52 14, , /2" x 5/16" triplex 12,70 7,94 7,93 3,96 45,72 46,99 11,40 1,52 14, , /2" x 5/16" quad. 12,70 7,94 7,93 3,96 60,20 61,46 11,40 1,52 14, , /2" x 5/16" sext. 12,70 7,94 7,93 3,96 89,15 90,42 11,40 1,52 14, , /2" x 1/4" 12,70 6,35 7,77 3,58 14,48 16,51 9,70 1, , /8" x 3/8" 15,88 9,53 10,16 5,08 21,08 22,61 15,00 2, , /8" x 3/8" duplex 15,88 9,53 10,16 5,08 39,37 40,64 15,00 2,03 18, , /8" x 3/8" triplex 15,88 9,53 10,16 5,08 57,40 58,67 15,00 2,03 18, , /8" x 3/8" quad. 15,88 9,53 10,16 5,08 75,44 76,96 15,00 2,03 18, , /8" x 3/8" quint. 15,88 9,53 10,16 5,08 93,73 95,25 15,00 2,03 18, , /8" x 3/8" sext. 15,88 9,53 10,16 5,08 111,76 113,28 15,00 2,03 18, , /8" x 3/8" octuple 15,88 9,53 10,16 5,08 148,08 149,61 15,00 2,03 18, , /8" x 3/8" tenf. 15,88 9,53 10,16 5,08 184,40 185,93 15,00 2,03 18, , /4" x 1/2" 19,05 12,70 11,91 5,94 26,42 28,19 18,00 2, , /4" x 1/2" duplex 19,05 12,70 11,91 5,94 49,28 51,05 18,00 2,39 22, , /4" x 1/2" triplex 19,05 12,70 11,91 5,94 72,14 73,91 18,00 2,39 22, , /4" x 1/2" quad. 19,05 12,70 11,91 5,94 95,00 96,77 18,00 2,39 22, , /4" x 1/2" quint. 19,05 12,70 11,91 5,94 117,86 119,63 18,00 2,39 22, , /4" x 1/2" sext. 19,05 12,70 11,91 5,94 140,46 142,24 18,00 2,39 22, , /4" x 1/2" octuple 19,05 12,70 11,91 5,94 186,18 187,96 18,00 2,39 22, , /4" x 1/2" tenf. 19,05 12,70 11,91 5,94 231,65 233,43 18,00 2,39 22, ,76 eight [kg/m] hains * = Bushing diameter (chain without roller) Follows 103

106 NSI Standard Standard size p Inner width b1 Roller diameter Dr Pin diameter Pin length l Pin length G. c g max Plate thickness T e verage ultimate strength [N] 80 1" x 5/8" 25,40 15,88 15,88 7,93 33,53 36,58 23,10 3, , " x 5/8" duplex 25,40 15,88 15,88 7,93 62,74 65,79 23,10 3,18 29, , " x 5/8" triplex 25,40 15,88 15,88 7,93 91,95 95,00 23,10 3,18 29, , " x 5/8" quadruple 25,40 15,88 15,88 7,93 121,67 124,46 23,10 3,18 29, , " x 5/8" quintuple 25,40 15,88 15,88 7,93 150,88 153,92 23,10 3,18 29, , " x 5/8" sextuple 25,40 15,88 15,88 7,93 180,34 183,39 23,10 3,18 29, , " x 5/8" octuple 25,40 15,88 15,88 7,93 238,76 242,06 23,10 3,18 29, , "1/4 x 3/4" 31,75 19,05 19,05 9,53 40,89 43,94 28,70 3, , "1/4 x 3/4" duplex 31,75 19,05 19,05 9,53 76,71 79,76 28,70 3,96 35, , "1/4 x 3/4" triplex 31,75 19,05 19,05 9,53 112,52 115,82 28,70 3,96 35, , "1/4 x 3/4" quadruple 31,75 19,05 19,05 9,53 148,34 151,64 28,70 3,96 35, , "1/4 x 3/4" quintuple 31,75 19,05 19,05 9,53 184,15 187,45 28,70 3,96 35, , "1/4 x 3/4" sextuple 31,75 19,05 19,05 9,53 219,96 223,01 28,70 3,96 35, , "1/4 x 3/4" octuple 31,75 19,05 19,05 9,53 291,59 294,64 28,70 3,96 35, , " 1/2 x 1" 38,10 25,40 22,23 11,10 50,80 54,36 35,10 4, , " 1/2 x 1" duplex 38,10 25,40 22,23 11,10 96,27 99,82 35,10 4,75 45, , " 1/2 x 1" triplex 38,10 25,40 22,23 11,10 141,73 145,29 35,10 4,75 45, , " 1/2 x 1" quadruple 38,10 25,40 22,23 11,10 187,45 191,01 35,10 4,75 45, , " 1/2 x 1" quintuple 38,10 25,40 22,23 11,10 232,92 236,47 35,10 4,75 45, , " 1/2 x 1" sextuple 38,10 25,40 22,23 11,10 278,38 281,94 35,10 4,75 45, , " 1/2 x 1" octuple 38,10 25,40 22,23 11,10 369,32 372,87 35,10 4,75 45, , " 1/2 x 1" tenf. 38,10 25,40 22,23 11,10 460,25 463,80 35,10 4,75 45, , " 3/4 x 1" 44,45 25,40 25,40 12,70 54,36 58,67 39,60 5, , " 3/4 x 1" duplex 44,45 25,40 25,40 12,70 103,38 107,70 39,60 5,56 48, , " 3/4 x 1" triplex 44,45 25,40 25,40 12,70 152,40 156,46 39,60 5,56 48, , " 3/4 x 1" quadruple 44,45 25,40 25,40 12,70 201,42 205,49 39,60 5,56 48, , " 3/4 x 1" sextuple 44,45 25,40 25,40 12,70 299,21 303,28 39,60 5,56 48, , " x 1" 1/4 50,80 31,75 28,58 14,28 64,52 69,34 46,00 6, , " x 1" 1/4 duplex 50,80 31,75 28,58 14,28 123,19 128,02 46,00 6,35 58, , " x 1" 1/4 triplex 50,80 31,75 28,58 14,28 181,86 186,69 46,00 6,35 58, , " x 1" 1/4 quadruple 50,80 31,75 28,58 14,28 240,54 245,36 46,00 6,35 58, , " x 1" 1/4 sextuple 50,80 31,75 28,58 14,28 357,89 362,46 46,00 6,35 58, , " 1/2 x 1" 1/2 63,50 38,10 39,68 19,84 79,25 87,38 58,70 7, , " 1/2 x 1" 1/2 duplex 63,50 38,10 39,68 19,84 150,88 159,00 58,70 7,93 71, , " 1/2 x 1" 1/2 triplex 63,50 38,10 39,68 19,84 222,50 230,63 58,70 7,93 71, , " 1/2 x 1" 1/2 quadr. 63,50 38,10 39,68 19,84 294,13 302,26 58,70 7,93 71, , " 1/2 x 1" 1/2 sextuple 63,50 38,10 39,68 19,84 437,13 445,01 58,70 7,93 71, ,97 eight [kg/m] 104

107 TRNSPORT HINS Types of transport chains hains with sliding plates Roller hains dvantages: Easier to manufacture heaper solution with same load strength More effective in dirty environments Disadvantages: Movement requires more power dvantages (due to lower friction): Larger distances between centers Lower power is required Less operating costs Disadvantages: Not suitable in dirty environments because rollers may become blocked Types of attachments Transport chains can be equipped with special attachments, such as links with plates, pushers, protruding pins to support or to drag the material. Two types available: Symmetrical attachments ( K o M): Uniformly distributed load on the chain Good alignment Suitable for very heavy loads or for non-symmetrical load distribution Non- symmetrical attachments ( o M35): Non-symmetrical load distribution with possible chain torsion Irregular stress distribution and consequent wear of the chain bearing surface (rollers or plates) To be used with connecting pins between the two chains to help maintaining correct alignment (see different configurations of figure 2) To be used with reduced transporting weight and with short distances between centers of chains Uniform load distribution with symmetrical attachments hain torsion with non-symmetrical attachments hains One connecting pin between chains maintains alignment 105

108 onveyor chain installation The best configuration for a chain conveyor is shown in the following diagram: Driving sprocket in the front part ell supported chain both in the operating and in the reverse section DISTNE BETEEN ENTRES SLIDE HIN TIGHTENER RER TRSPORT BELLY FRONT NON SUPPORTED SETION In the driving sprocket exit section there should be a non-supported section, which has two functions: it allows the chain to set the belly weight force keeps the chain in mesh with the driving sprocket There is no wear between pin and bushing because of the very low tension in the reverse section and the deflection is reduced by the support guides. It is not advisable to install the driving sprocket in the rear of the conveyor because the chain, which is always under load during the whole distance covered, would suffer abnormal wear. Especially in the area of high pressure, i.e. where the material is loaded, there is a risk of chain accumulation in the driving sprocket area and the chain may consequently fall off. UMULTION RER TRSPORT FRONT Use a chain tightening device to adjust the distance between centers and to maintain a correct belly but do not overload the chain. Other installation methods are shown in following figure. These types of supports cause more wear because the chain is supported only in short sections. REVERSE SETIOM SUPPORTED BY ROLLERS ONVEYOR SUPPORTED BY SLIDES Problems and solutions The most common problem of conveyors is tripping. Following table shows some possible causes and solutions of this problem. Possible cause Excessive friction onveyor is too long onveyor speed is too low Speed variations due to polygonal effect Solution lean and lubricate moving parts Use shorter conveyor sections Increase the speed or the number of teeth of the driving wheel Use driving plate wheels with 12 or more teeth 106

109 How to find the right conveyor chain size 1 onveyor classification onveyors are identified in 6 classes according to the type of chain and the type of movement of the transported material lass hain Material Material Sliding chain Transported B Roller chain Transported hain with additional rollers Transported D Sliding chain with fins Sliding E Sliding chain without fins Sliding F Roller chain Sliding 2 - Total load on the chain The calculation of the total load acting on the chain depends on the conveyor classification. - Transported load with sliding chain or with roller chain (classes,b,) Horizontal conveyor Inclined conveyor α = g f ( 2P + P ) J [N] = g [ P( 2f cosα + sinα) + P ( f cosα + sinα) ] + Jcos [N] T T α T = Total chain load [N] g = cceleration due to gravity = 9.81 m/s 2 f 1 = oefficient of friction between chain and guide = Distance between centers of conveyor [m] P = hain weight per meter [kg/m] P 1 = eight per meter of the transported material acting on the chains and of their supports (shutters, crosspieces, hinges) [kg/m] J = Load component given by the transported material [N] a = Transmission inclination alculation of P coefficient hains P = hain linear weight. ccording to the different types, it can be calculated with the following formulas: Material total weight P = 600 [kg/m] for transported load and roller chains Material total weight P = 200 [kg/m] for load and/or sliding chains 107

110 alculation of coefficient f 1 f 1 = the coefficient of friction between chain and guide varies according to the type of chain (sliding or roller chain). Type of chain f 1 Non-lubricated steel guide 0,3 0,5 Lubricated steel guide 0,2 ood 0,5 Polyethylene 0,15 0,4 For roller chains the coefficient of friction is calculated according to the following formula, considering that, as a first approximation, you can take a value equal to 0,2 : db f 1 = fr d r f r = 0,4 without lubrication f r = 0,3 with lubrication d b = chain bushing diameter or roller inner diameter d r = roller outer diameter alculation of coefficient J J = load component of the transported material ith solid materials use the known weight (in N). ith agglomerated materials, use the following formula: J = h f 2 H h = height of the transported material f H = characteristic value and table value of the material Material f 2 f H MTERIL luminium 0, Dry coal ash 0, Humid coal ash 0, Sugar 0, linker cement 0,7 530 Pieces of anthracite coa 0, oke coal 0, heat / ereals 0, Gravel 0, Lime 0, Sand 0,

111 - Sliding load with sliding or roller chain (class D, E, F) Horizontal conveyor ( 2f P + f P ) J T = 9, f 2 = coefficient of friction between material and runways (see table in previous page) Inclined conveyor where: [ P( 2f cosα + sinα) + P ( f cosα + sinα) ] + Jcos [N] T = g 1 1 P 1 = Q 3,6 v 1 α Q v = conveyor hourly carrying capacity [t/h] = v chain translation speed [m/min] - Elevator hains ( P ) T = 9,81 + P 1 109

112 3 alculation of design working load The calculation of the design working load takes into consideration the dynamics of the transported material. In particular, with the service factor Fs, takes into consideration the load fluctuations, which may increase the static load on the chain. On the contrary, with the speed factor Fv, takes into consideration the conveyor speed and the number of teeth on the sprocket. alculate according to following formulas: T T F F = P s T F v [N] for single chain conveyors T P T F F = s T F v 1,2 n. chains [N] for multiple chain conveyors ith multiple chains, an additional safety factor should be considered for overloads due to non-homogeneous distribution of material, if any. This factor may drop to 1 with double chains and not heavy operating conditions. Type of load Start / stop under load Operating conditions Overload % 8-10 working hours /day Sevice Factor F s working hours /day Uniform than 5 per day Less than 5% 1,0 1,2 Moderate peak load 5 to 2 per hour 5% to 20% 1,2 1,4 High peak load 2 to 10 per hour 20% to 40% 1,5 1,8 Operating conditions F T Up to 100 1,0 Temperature 100 to 180 1,1 180 to 260 1,2 over 260 ontact our technical support department No. of teeth Speed factor F v hain speed [m/min] ,4 2,0 2,9 4, ,1 1,4 1,8 2,3 4,0-8 1,0 1,3 1,5 1,8 2,5 3,6 9 1,0 1,2 1,4 1,6 2,0 2,6 10 0,9 1,1 1,2 1,4 1,7 2,0 11 0,9 1,0 1,2 1,3 1,5 1,8 12 0,9 1,0 1,1 1,2 1,4 1,6 14 0,8 0,9 1,0 1,1 1,3 1,4 16 0,8 0,9 1,0 1,0 1,2 1,3 18 0,8 0,9 0,9 1,0 1,1 1,3 20 0,8 0,9 0,9 1,0 1,1 1,2 24 0,8 0,8 0,9 0,9 1,0 1,2 110

113 4 How to choose a chain fter having defined the design working load, choose the suitable chain by comparing the design load, multiplied by a safety factor, with its ultimate strength. R T = T P k R T = chain ultimate strength [N] k = safety factor s a rule, consider a value equal to 8, because a stress of traction equal to 60% of the chain ultimate strength would result in permanent chain deformation. In case of heavier operating conditions, use higher values. 5 heck the size The selected chain size can be verified by considering the exact chain weight. In case of concentrated loads it is also necessary to check the specific pressure between rollers and bushings and between bushings and pins by using the following formulas: Specific pressure on the pin = L p d p T P = effective traction force on the chain L p = bushing length d p = bushing length T p ontact materials Spec. press. max Bushing Pin [kg/mm 2 ] asehardened steel asehardened steel 2,50 asehardened steel Hardened and tempered steel 2,10 ast iron asehardened steel 1,75 Stainless steel Stainless steel 1,20 Bronze asehardened steel 1,00 Specific pressure on the roller = P r = load on each roller L = roller hole length D r = roller hole diameter Pr L D r ontact materials Spec. press. max Roller Bushing [kg/mm 2 ] asehardened steel asehardened steel 1,00 Hardened and tempered steel asehardened steel 1,00 ast iron asehardened steel 0,70 Stainless steel Stainless steel 0,40 Bronze asehardened steel 0,60 Polyethylene asehardened steel 0,10 ast iron Bronze 0,28 6 Requested shaft power T = total traction force of all chains [N] = driving sprocket pitch diameter = T D = 2 p ω hain 180 sin [att] [] m hains ω = No. of teeth of driving sprocket = No. of teeth of driving sprocket = n 0,1047 [rpm] The theoretical power value should be corrected according to the mechanical performance of the rotating components (motors, reduction gears, transmission chains, etc.) 111

114 Non-standard metric pitch chains with solid pins Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets on request. hain N p Inner width L Roller diameter D2 Bushing diameter D5 Pin diameter D6 Plate heght H Plate thickness s Pin length F1 Pin length g. F2 Ultimate strength [N] ,5 25 8,4 5, ,0 14, , ,5 25 8,4 5, ,0 16, , ,5 25 8,4 5, ,0 16, , ,5 25 8,4 5, ,0 16, , ,5 25 8,4 5,7 18 2,5 26, ,7 205SS 50 11,5 25 8,4 5,7 18 2,5 26, , , , , ,9 206SS 50 11, , , ,9 206R 50 11, , , , , ,0 19, ,0 400SS , ,0 19, , , ,0 19, , , , ,9 500R , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,3 hain weight [kg/m] 112

115 ttachments for non-standard metric pitch chains with solid pins hain N p Fin folding a Hole distance b Fin width c Hole diameter d Hole diameter d1 Max. dimensions e Holes inter. f Plate Thickness s No. of holes ttach. weight [kg/m] , , , , , , , , , ,5 1 0, B , ,5 1 0, SS , ,5 1 0, , , R , , ,5 48, , B 50 16, ,5 48, or 2 0, SS ,5 48, or 2 0, S*** , SB 50 16, , , ,5 48, or 2 0, B ,5 61, or 2 0, H 50 17, or 2 0, , , , , ,5** , , * 0, or 2* 0, , or 2 0, , , B , , , , , or 2 0, , , ,120 hains *** = vailable also in stainless steel (SS) ** = ttachment folded in chain center line * = elded attachment 113

116 Non-standard metric pitch chains with hollow pins Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers chains with bushing without roller plate wheels on request vailable surface treatments: inc plating Nickel plating Plate wheels on request. hain N p Inner width L Roller diameter D2 Bushing diameter D5 Pin diameter D6 Pin diameter f. D7 Plate height H Plate thickness s Pin length F1 Pin length g. F2 Ultimate strength [N] , ,2 20 2, ,8 250R 50 11, ,2 20 2, ,8 250SS 50 11, ,2 20 2, , , ,2 20 2, ,8 400* , , , ,6 500R , , ,6 500SS , , , , ,1 501SS , , , , ,6 502SS , , , , ,4 503SS , , , , , , , , , , ,4 703R , , , , , ,2 704R , , , , , R , , hain weight [kg/m] * Profiled plates (straight plates also available) 114

117 Hollow pin chains Profiled plates Sprockets upon request. hain N p Inner width L Roller diameter D1 Bushing diameter D5 Pin diameter D6 Pin diameter f. D7 Plate height H Plate thickenss s Pin length F1 Pin length g. F2 Ultimate strength [N] ,75 20, ,8 11,0 8,3 22,0 3 36,0 22, ,5 260SS 41,75 20, ,8 11,0 8,3 22,0 3 36,0 22, ,5 260R 41,75 20, ,8 11,0 8,3 25,0 3 36,0 22, ,9 260RB 41,75 20, ,8 11,0 8,3 25,0 3 36,0 22, , , ,0 11,5 8,2 25,5 3 26,5 14, , ,8 10, ,0 11,5 8,2 25,5 3 26,5 14, , ,8 10, ,0 11,5 8,2 25,5 3 26,5 14, ,1 262SS 50,8 10, ,0 11,5 8,2 25,5 3 26,5 14, ,1 3865R 60 10, ,0 11,5 8,2 26,0 3 26,5 14, ,5 3604R 63 10, ,0 11,5 8,2 26,0 3 26,5 14, , , ,0 11,5 8,2 25,5 3 26,5 14, ,5 hain weight [kg/m] Non-standard metric pitch chains with eccentric rollers vailable models: Nylon rollers Delrin rollers vailable surface treatments: inc plating Nickel plating Sprockets upon request. hains hain N p Inner width L Roller diameter D1 Bushing diameter D5 Pin diameter D6 Plate height H Plate eccentr. H1 Plate thickenss s Pin length F1 Pin length g. F2 Ultimate strength [N] ,5 18 8,4 5,7 17,5 10 2,5 25,5 15, , ,5 25 8,4 5, , , , , , , , , , ,5 hain weight [kg/m] 115

118 urved conveyor chains vailable models: stainless steel nylon or Delrin rollers Surface treatments: inc plating Sprockets upon request. hain N p Inner width L Roller diameter D2 Bushing diameter D5 Pin diameter D6 Plate height H Plate thickenss s Pin length F1 Pin length g. F2 urve radius Rc Ultimate strength [N] , , , , , hain weight [kg/m] hain N p Pin folding a Hole distance b Fin width c Hole diameter d Max. size e Plate Thickness s ttach. weight , * , ,055 * = ttachment without holes 116

119 onveyor chains BS 4116 in inch pitch with solid pins Following types are available: nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Type Type Type D hain N p Inner width L Roller diameter D2 Flange diameter D4 Flange dist. G Bushing Pin diameter diameter D5 D6 Plate Height H Plate thickness S1 Outer pl. thickn. S2 Pin length F1 Pin length g. F2 Ultimate strength N40 50, , , N40 63, , , N40 76, , , N40 101, , , N , , N40 152, , , N100 76, , , N100 88, , , N , , , N , , N , , , N , , , N , , , , , N , , , , N , , , , , N , , , , , N , , , , , N , , , , , N , , , , N , , , N , , , N , , , N , , N , , , [N] [N*] hains * = Ultimate strength with hardened and tempered plates 117

120 ttachments for BS 4116 conveyor chains hain N p Fin folding a Hole distance b Fin width c Hole diameter d Hole diam. d1 max size e Hole inter. f No. holes ng. hain weight [kg/m] type type type D N40 50, , ,7-64,5-1 Folded 3 4,2 4,4 0,1 N40 63, , ,7 9, ,2 2 40x25x4 2,8 3,8 3,9 0,1 N40 76, , ,7 9, ,2 3 Folded 2,5 3,3 3,4 0,1 N40 101, , ,7 9, ,8 3 Folded 2,3 2,9 3 0,1 N40 127, , ,7 9, ,2 3 40x25x4 2,1 2,6 2,7 0,2 N40 152, , ,7 9, ,2 3 40x25x4 1,9 2,4 2,5 0,2 N100 76, , x5 4,9 7,7 8,2 0,1 N100 88, , x5 4,7 7,1 7,5 0,1 N , , , ,8 3 Folded 4,6 6,5 7 0,1 N , , , ,2 2 45x5 4,3 5,6 6,2 0,3 N , ,5 114, , ,2 3 Folded 4,1 5,2 5,7 0,3 N , , , x5 3,8 4,6 5 0,4 N , , x6 8,8 13,7 14,9 0,2 N , ,5 12, ,7 2 50x6 8 11,8 12,8 0,3 N , ,5 12, ,2 2 50x6 7,5 10,8 11,5 0,4 N , ,5 12, ,2 2 50x6 7 9,8 10,5 0,4 N , ,5 12, x6 6,7 9,2 9,7 0,6 N , ,5 12, x6 6 8,9 9,1 0,7 N , ,5 12, x6 5,6 7,6 8 0,7 N , ,1 2 60x8 14,7 24,3 26 0,5 N , ,1 2 60x8 13, ,5 0,5 N , ,2 2 60x8 13,1 20,5 21,6 0,7 N , , x8 12, ,9 N , x8 11,6 16,5 17,5 1,6 ttach. weight 118

121 onveyor chains BS 4116 in inch pitch with hollow pins Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets upon request. Type Type Type D hain N p Inner width L Roller diameter D2 Flange diameter D4 Flange dist. G Bushing diameter D5 Pin diameter D6 Pin f. diam. D7 Plate Height H Plate thickness S1 Outer pl. thickn. S2 Pin length F1 Pin length g. F2 Ultimate strength [N] [N*] N21 38,1 12, ,5 18 2,5 2, , N21 50,8 12, ,5 18 2,5 2, , N21 63,5 12, ,5 18 2,5 2, , N21 76,2 12, ,5 18 2,5 2, , N40 50, ,8 40 2, , ,4 19, N40 63, ,8 40 2, , ,4 19, N40 76, ,8 40 2, , ,4 19, N40 88, ,8 40 2, , ,4 19, N40 101, ,8 40 2, , ,4 19, N ,8 40 2, , ,4 19, N40 152, ,8 40 2, , ,4 19, N60 76, ,5 60 3, , , N60 88, ,5 60 3, , , N60 101, ,5 60 3, , , N ,5 60 3, , , N60 152, ,5 60 3, , , N60 177, ,5 60 3, , , N60 203, ,5 60 3, , , N , , ,9 20, , N , ,9 20, , N , , ,9 20, , N , , ,9 20, , N , , ,9 20, , N , , ,9 20, , N , ,9 20, , N , , , , , N , , , , , N , , , , , N , , , , N , , , , , hains * = Ultimate strength with hardened and tempered plates 119

122 onveyor chains BS 4116 in inch pitch with eccentric rollers Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets upon request. Inner Roller Bushing Pin Plate Plate Plate Outer pl. Pin Pin Ultimate strength hain hain width diameter diameter diameter Height Height thickness thickn. length length g. weight N p L D2 D5 D6 H H1 S1 S2 F1 F2 [N] [N*] [kg/m] NE40 50, , ,6 NE40 63, , ,1 NE40 76, , ,4 NE40 88, , ,1 NE40 101, , ,9 NE , ,6 NE40 152, , ,3 NE100 76, , ,2 NE100 88, , ,5 NE , , ,8 NE , ,9 NE , , ,4 NE , , NE , , ,7 NE , , , , ,6 NE , , , ,4 NE , , , , ,9 NE , , , , ,9 NE , , , , ,1 NE , , , , ,5 NE , , , NE , , ,2 NE , , ,4 NE , , ,3 NE , ,4 NE , , ,5 * = Ultimate strength with hardened and tempered plates 120

123 onveyor chains British Standard ISO DIN 8167 with solid pins Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets upon request. Type Type B Type Type D hain N p Inner width L Roller diameter D1 Roller diameter D2 Flange diameter D4 Flange distance G Bushing diameter D5 Pin diameter D6 Plate height H Plate Thickness s Pin length F1 onn. link length F2 Ultimate strength M , , , M , , , M , , , M , , , M , M , M , M , M , , M , , M , , M , , M M M M M M ,5 30, M ,5 30, M ,5 30, M ,5 30, M ,5 30, M , M , M , M , M , M , , M , , M , , M , , M , , M M M M M M , M , M , M , M , M , M , M , M , [N] [N*] hains * = Ultimate strength with hardened and tempered plates 121

124 ttachments for conveyor chains British Standard ISO DIN 8167 ll attachments for conveyor chains according to British Standard (ISO 1977) can be delivered with one hole. hain N p Fin folding a Hole distance b Fin width c Holes diameter d1 Max. size e Hole inter. f No. of holes ng. hain weight [kg/m] M , Piegato 1,1 1,3 2,4 2,5 0,02 M , Piegato 1,01 1,3 2 2,1 0,02 M , x3 0,99 1,2 1,8 1,9 0,04 M , x3 0,9 1,1 1,6 1,6 0,06 M x3 1,6 1,9 3,3 3,4 0,02 M x3 1,5 1,7 2,8 2,9 0,02 M x3 1,4 1,6 2,5 2,6 0,05 M x3 1,3 1,5 2,1 2,2 0,08 M x4 2,25 2,6 4,4 4,6 0,04 M x4 2 2,7 3,7 3,9 0,07 M x4 1,9 2,1 3,2 3,4 0,1 M x4 1,8 2 2,9 3 0,15 M x4 3,4 3,9 6,8 7,2 0,05 M x4 3 3,4 5,7 6 0,07 M x4 2,8 3,1 5 5,2 0,12 M x4 2,6 2,9 4,4 4,5 0,18 M x4 2,54 2,7 3,9 4,1 0,27 M x4 4,7 5,4 9,2 9,4 0,07 M x4 4,3 4,8 7,9 8 0,12 M x4 4 4,4 6,9 7 0,18 M x4 3, ,1 0,27 M x4 3,5 3,8 5,3 5,4 0,36 M x6 6, ,7 0,13 M x6 6,2 7, ,5 0,18 M x6 5,7 6,5 10,4 10,8 0,3 M x6 5,3 5,9 9 9,3 0,44 M x6 5 5,5 7,9 8,2 0,59 M x6 9,7 11,2 18,9 20,2 0,13 M x6 8, ,3 18,1 0,23 M x6 8,2 9, ,4 0,37 M x6 7,6 8,4 12,2 13,4 0,53 M x6 7,3 7, ,8 M x ,8 25,8 26,6 0,3 M x , ,7 0,43 M x , ,5 0,71 M x8 10,3 11,2 16,7 17,1 1,13 M x8 9,8 10,5 14,9 15,2 1,6 M x9 18,3 20,4 33,3 34,6 0,32 M x9 16,7 18,4 28,7 29,7 0,66 M x9 15, ,2 26 1,1 M x9 14,6 15,7 22,3 22,9 1,46 M x9 13,9 14, ,5 1,46 M x ,5 47 0,33 M x ,9 39, M x ,5 36 1,6 M x9 19,6 21,2 30,5 31,4 2,3 Type Type B Type Type D ttach. weight 122

125 onveyor chains British Standard ISO DIN 8167 with hollow Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets upon request. Type Type B Type Type D hain N p Inner width L Roller diameter D1 Roller diameter D2 Flange diameter D4 Flange dist. G Bushing diameter D5 Pin diameter D6 Pin Diam. D7 Plate height H Plate thickness S Pin length F1 Pin length g. F2 Ultimate strength [N] [N*] M , , , M , , , M , , , M , , , M , , , M ,5 10, M ,5 10, M ,5 10, M ,5 10, M ,5 10, M , , , M , , , M , , , M , , , M , , , M , , , M , , M , , M , , M , , M , , hains * = Ultimate strength with hardened and tempered plates 123

126 onveyor chains British Standard ISO DIN 8167 with eccentric rollers Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets upon request. hain N p Inner width L Roller diameter D2 Bushing diameter D5 Pin diameter D6 Plate height H Height H1 Plate thickness S Pin length F1 Pin length g. F2 Ultimate strength ME , ME , ,6 ME , ,3 ME , ME , ,1 ME , ,5 ME , ,1 ME , ,8 ME ,5 4 40, ,5 ME ,5 4 40, ,8 ME ,5 4 40, ,2 ME ,5 4 40, ,7 ME ,3 ME ME ,1 ME ,4 ME ,5 5 54,5 30, ME ,5 5 54,5 30, ,5 ME ,5 5 54,5 30, ,5 ME ,5 5 54,5 30, ,2 ME ,5 5 54,5 30, ME ME ,5 ME ME ME ME , ,5 ME , ME , ME , ME , ,5 ME ,5 ME ,5 ME ME ME ME ME ME ME ,6 ME ,5 ME ME ME ME [N] [N*] hain weight [kg/m] * = Ultimate strength with hardened and tempered plates 124

127 onveyor chains British Standard ISO DIN 8167 with scraping plates Sprockets upon request. hain N p Inner width L Bushing diameter D5 Pin diameter D6 Plate height H Plate thickness S Folding g Scraping pl. width F3 Ultimate strength [N] MR ** ,8 MR ** ,6 MR ** ,3 MR ** MR ** ,7 MR ** ,2 MR ** ,7 MR ** ,3 MR ** ,7 MR ** ,9 MR ** ,2 MR ** MR ** MR ** MR ** ,3 MR ** ,7 MR ** ,6 hain weight [kg/m]* hains ** = Free sizes * = ithout scraping plates 125

128 onveyor chains Standard DIN 8165 with solid pins Following types are available: stainless steel attachments (SS code) nylon rollers Delrin rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating D3 Sprockets upon request. Type Type B Type Type D hain N p Inner width L Roller diam. D1 Roller diam. D2 Roller diam. D3 Flange diam. D4 Flange diam. G Bushing diam. D5 Pin diam. D6 Plate height H Plate thickness S Pin length F1 onn. Link length F2 Ultimate strength [N] [N*] FV FV FV FV FV FV FV FV FV FV FV , FV , FV , FV , FV , FV , FV , FV , FV , FV , FV , FV , FV FV FV FV FV FV FV FV FV FV FV FV FV FV * = Ultimate strength with hardened and tempered plates 126

129 ttachments for conveyor chains Standard DIN 8165 hain N p Fin folding a Hole distance b Fin width c Hole diam. d1 Max. size e Hole inter. f No. of holes ng. hain weight [kg/m] FV , Folded 2,4 2,9 4 5,6 0,05 FV ,5 40,5-1 Folded 2 2,4 3,3 4,5 0,04 FV ,5 40, x3 1,9 2,2 3 3,9 0,05 FV ,5 40, x3 1,7 2 2,6 3,3 0,06 FV ,5 40, x3 1,6 1,9 2,3 3 0,07 FV , x4 3,8 4,5 6,4 8,9 0,06 FV , x4 3,2 3,8 5,3 7,2 0,1 FV , x4 3 3,5 4,7 6,2 0,11 FV , x4 2, ,3 0,14 FV , x4 2,4 2,7 3,5 4,4 0,17 FV , x4 5,6 6, ,7 0,07 FV , x4 5,1 6 8,6 12,3 0,11 FV , x4 4,5 5,3 7,3 10,3 0,13 FV , x4 4,2 4,8 6,5 8,8 0,16 FV , x4 4 4,5 5,8 7,6 0,2 FV , x4 3,5 3,8 4,8 5,8 0,24 FV , x4 3,4 3,7 4,6 5,4 0,21 FV x6 6,7 7,7 11,2 18,8 0,2 FV x6 6 6,8 9,6 15,7 0,27 FV x6 5,5 6,1 8,3 13 0,31 FV x6 5,2 5,7 7,5 11,3 0,4 FV x6 4,9 5,3 6,7 9,8 0,5 FV x6 8,2 9,5 14,3 21,4 0,23 FV x6 7,4 8,5 12,3 18 0,3 FV x6 6,7 7,5 10,5 14,9 0,36 FV x6 6 6,7 9 12,8 0,45 FV x6 5,8 6,3 8,3 11 0,54 FV x7 10,5 12,4 18,9 31,3 0,32 FV x7 10,2 11,7 16,7 26,5 0,41 FV x7 9,6 10,8 14,8 25,9 0,52 FV x7 8,9 9, ,3 0,62 FV x7 8,3 9 11,6 16,6 0,72 FV x8 13,4 16,4 23,8 45,9 0,57 FV x8 12,3 14,7 20,6 38,3 0,71 FV x8 11,3 13,3 17,9 32,1 0,85 FV x8 10, , Type Type B Type Type D ttach weight hains 127

130 onveyor chains Standard DIN 8165 with hollow pins Following types are available: nylon rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets upon request. D3 Type Type B Type Type D hain N p Inner width L Roller diam. D1 Roller diam. D2 Roller diam. D3 Flange diam. D4 Flange dist. G Bushing diam. D5 Pin diam. D6 Pin diam. D7 Plate height H Plate thickn. S Pin length F1 Pin Ultimate strength length g. F2 [N] [N*] FV FV FV FV FV FV , FV , FV , FV , FV , FV , FV , FV , FV , FV , FV , FV , FV FV FV FV FV FV FV FV FV FV FV FV FV FV * = Ultimate strength with hardened and tempered plates 128

131 onveyor chains Standard DIN 8165 with eccentric rollers ollowing types are available: nylon rollers pre-loaded pre-selected vailable surface treatments: inc plating Nickel plating Sprockets upon request. hain N p Inner width L Roller diameter D2 Roller diameter D5 Pin diameter D6 Plate height H Height H1 Plate thickness S Pin length F1 Pin length g. F2 Ultimate strength FVT , ,0 FVT , ,3 FVT , ,8 FVT , ,4 FVT , ,0 FVT ,5 FVT ,5 FVT ,7 FVT ,1 FVT ,5 FVT , ,7 FVT , ,0 FVT , ,7 FVT , ,7 FVT , ,8 FVT , ,8 FVT , ,4 FVT ,7 FVT ,7 FVT ,7 FVT ,7 FVT FVT , ,8 FVT , ,6 FVT , ,6 FVT , ,3 FVT , ,1 FVT ,2 FVT ,8 FVT ,4 FVT ,5 FVT ,9 FVT ,2 FVT ,5 FVT ,7 FVT ,3 [N] [N*] hain weight [kg/m] hains * = Ultimate strength with hardened and tempered plates 129

132 onveyor chains Standard DIN 8165 with scraping plates Sprockets upon request. hain N p Inner width L Bushing diameter D5 Pin diameter D6 Plate height H Plate thickness S Folding g Scraping pl. width F3** Ultimate strength [N] hain weight [kg/m]* FV ** ,90 FV ** ,70 FV ** ,60 FV ** ,00 FV ** ,70 FV ** ,40 FV ** ,50 FV ** ,20 FV ** ,00 FV ** ,70 FV ** ,00 FV ** ,50 FV ** ,40 FV ** ,70 FV ** ,00 FV ** ,50 FV ** ,20 FV ** ,60 FV ** ,40 FV ** ,30 FV ** ,30 ** = Free sizes * = ithout scraping plates 130

133 Malleable cast iron chains for case conveyors This type of chain is used in medium corrosive environments to slide concentrated loads, mainly in the bottling industry to transport boxes or cases.. It is generally provided with profile rail guides and it can be used on curved conveyors. It is made of cast iron with non-treated steel pins and it has following characteristics: riveted pin inside the plates large sliding surface curve radius minimum: 500 mm vailable models: draft and driving plate wheels of cast iron or acetal resin links of acetal resin or polypropylene with very low coefficient of friction 600 Direction of motion Threaded connecting pin 600D Direction of motion Threaded connecting pin hains hain type p Ultimate strength [N] Operating load [N] urve radius , ,8 600D 63, ,5 hain weight [kg/m] 131

134 onveyor chains for bricks and tiles Sprockets can also be delivered upon request. hain N p Inner width b1 Roller diameter Dr Pin diameter gmax Pin length l1 ap height a ap surface c x e ap thickness s1 Ultimate strength min. [N] T 10 B 15,88 9,65 10,16 7,01 14,70 18,80 12,70 30 x 30 2, TB 85 20,00 16,00 12,00* 8,00 18,50 36,00 15,50 36 x 85 4, * = Bushing diameter onveyor steel chains for cases Sprockets can also be delivered upon request. hain N p Inner width b1 Pin diameter Plate height H Plate thickness int. s1 Out plate thickness s2 Max. size L urve radius min. Ultimate strength min. [N] ,85 18,00 14,00 30,00 16,00 6,00 38,00 400, ,1 hain weight [kg/m] 132

135 Pressed steel chains for overhead conveyors Removable links links This type of chains consists of forged and treated steel elements and, in comparison to their weight, they have a very high ultimate strength. The design allows simple manual assembly and disassembly. They are used in overhead conveyors because these joints allow application on different levels. They can be used in long distance conveyors, ground conveyors, heavy industry conveyors (foundries, steelmills, mines). Standard chains are used in the vast majority of cases. The X-type chains, on the contrary, are used for overhead conveyors combined with test and repair trolleys. The symmetrical pins can be rotated of 180, when they are worn out, to extend chain life. ll chain elements are made of hardened and tempered carbon steel or hardened and tempered allow steel to obtain the maximum ultimate strength and higher wear resistance. Different attachments are available, which allow the application on overhead conveyors with trolleys. STNDRD X Type hain N p Pin diameter D6 Inner plate thickness B Pin length L Plate height H Outer plate thickness S1 Inner plate thickness S2 Inner plate width K hain weight [kg/m] Ultimate strength [N] ,2 12,70 19,1 44,5 26,9 6,8 12,7 13,5 3, X ,2 12,70 19,1 44,5 26,9 10,4 12,7 13,5 3, ,4 15,88 25,9 55,6 35,1 7,9 16,0 17,5 4, X ,4 15,88 25,9 55,6 35,1 11,9 16,0 17,5 4, ,4 19,05 41,4 84,1 47,8 10,4 28,7 22,4 11, ,2 22,23 33,0 77,0 50,8 12,7 20,6 25,4 9, X ,2 22,23 33,0 77,0 50,8 18,3 20,6 25,4 10, hains 133

136 Trolleys of pressed steel for chains vailable: two-axis trolleys for heavy loads hangers special attachments hain N p ,2 X , ,4 X , , ,2 X ,2 Distance from girder to chain centre H 143,5 Base chain distance B Trolley size Roller diam. D Hanger thickn. E Girder height G 80 35,0 108,0 60,0 6, , ,0 108,0 60,0 6, ,0 136,0 80,0 9,0 230, ,0 136,0 80,0 9,0 230, ,0 136,0 80,0 9,0 230, ,0 172,0 124,0 13, ,0 172,0 124,0 13, hain distance Upper Lower Roller bolt bolt L N Bracket width F Trolley weight Max. carrying capacity 22,0 22, , ,0 22, , ,0 21, , ,0 21, , ,0 21, , ,0 29, , ,0 29, ,

137 SIT chain drive designations Plate heels Plate heel S = single; D = double; T = triple ode ISO (08 = 1/2 ; B = British Standard; 1 = single) Number of teeth (3 digits) Q S 08B1-025 Sprockets Sprocket S = single; D = double; T = triple ode ISO (08 = 1/2 ; B = British Standard; 1 = single) Number of teeth (3 digits) QP S 08B1-025 Hardened sprockets with finished bore, keyway and two set screw Hardened single sprocket with finished bore, keyway and two set screws ode ISO (08 = 1/2 ; B = British Standard; 1 = single) Number of teeth (3 digits) Bore diameter in mm QPF 08B1-025 F28 hains K = chain ES; KQ = quality chain; KQ = high quality chain R = per meter (entire coils or smaller quantities); gap = sold per meter in standard packages (5 m) S = single; D = double; T = triple ode ISO (08 = 1/2 ; B = British Standard; 1 = single) K R S 08B1 onnecting link and offset link K = chain ES; KQ = quality chain; KQ = high quality chain G = connecting link; F = offset link S = single; D = double; T = triple ode ISO (08 = 1/2 ; B = British Standard; 1 = single) K G S 08B1 135