The Hella ADR Installation Guide
|
|
|
- Homer Harrell
- 6 years ago
- Views:
Transcription
1 The Hella ADR Installation Guide The following pages are a guide to installing Hella Lamps in compliance with the Australian Design Rules (ADRs). The diagrams used are only intended as a general guide, and for exact mounting specifications, please refer to ADR 3/00. Australian Design Rules (ADRs) On the st October, Australia introduced stringent mandatory regulations for all vehicles COMPLIANT manufactured on or after that date. These regulations, known as 3rd Edition Australian Design Rules (ADRs), stipulate minimum performance and design standards for particular vehicle safety features. Hella supplies over 00 products complying with current ADRs including headlamps, reversing lamps, indicator lamps, reflectors and filament globes. The current lighting ADRs include: ADR /00 ADR /00 ADR 45/0 ADR 4/00 ADR 47/00 ADR 4/00 ADR 4/00 ADR 50/00 ADR 5/00 ADR 5/00 ADR 74/00 Direction Lighting and light-signalling devices not covered by ECE regulations (eg. Side Marker and ) Retro Reflectors Front and Rear Position (Side) Lamps, and End-Outline Marker Lamps including centre high mounted Filament Globes Rear Fog Lamps ECE specification The 3rd Edition ADRs cover all vehicles and trailers, even those not subject to registration requirements such as very light trailers or box trailers. The onus is on the manufacturer of motor vehicles, buses, trailers etc. to satisfy the certification board that the lamps are fitted exactly as prescribed in our instruction sheets and in accordance with ADR 3/00. To simplify the ADR approval process for smaller manufactures and individual vehicle builders, Hella has made a consolidated Summary of Evidence (SE) submission to the Federal Office of Road Safety (FORS) covering all Hella products that comply with 3rd Edition ADRs. For easy reference, Hella lists both the Hella and the FORS Component Registration Numbers (CRNs) in the Hella CRN Reference Chart (available for download on this website). D SIDE DIREC Part No. DuraLed 0 Illuminate COMPLIANT Descriptio High Wattage Globes /00 Daytime Running Lamp /00:Cat Front Direction Indicator Lamp R 4/00 Headlamp XD0/55 H4 Front Position Lamp HL4 T4W XD0/55 H4 HL*05*A 50 4/00 T4W FP*05*A R PW HL*00*A FP*00*A 53 PW FL*00*A 53 DRL*000*B CRN Reference Chart RL , 00CHROME, /00 4/00 Headlamp Front Position Lamp HL4 Sealed Beam N/A HL*05*A XD0/55 H4 HL*07*A T4W FP*07*A 53 HL*0*A HM00, 00MIL /00 Headlamp 4/00 Headlamp /00 Front Position Lamp HL /00 Headlamp (Low/Dipped Beam) C55 H /00 Headlamp (Low/Dipped Beam) CA55 H7 HL*0*A 4/00 Headlamp (High/Main Beam) CA55 H7 HL*030*A 00-00/0 4/00 Front Position Lamp HL4 T4W FP*030*A 304 4/00 Headlamp (High/Main Beam) CA55 H7 HL*03*A Headlamp C55 H HL*04*A 507 XD0/55 H4 HL*04*A 507 XD0/55 H4 HL*043*A 5 T4W FP*043*A 57 HL*044*A /00 Headlamp ion Lamp XD0/55 T4W HL*050*A 5*A /00 Headlamp HL4 H4 FP*044*A 507 wing chart outlines all lamps manufactured by Hella Australia Pty Ltd that requirements of respective 3rd Edition ADRs. L plify the ADR approval process, Hella has made a consolidated Summary of nce (SE) submission to the Federal Office of Road Safety (FORS) covering all a products that comply with 3rd Edition ADRs. The following listing includes both Hella and FORS Component Registra compliance can simply quote relevant CRNs to the register, instead of having to undertake a detailed SE Submissio For 3rd Edition compliance, ADR compliant globes must be used (as marked i catalogue). High wattage globes may be used only for off-road and non-3rd E ADR compliance applications (unless specified to the contrary). Instruction Lamp lla art Type CRN Reference Chart Instruction sheet.
2 SMALL TRUCK No. 0 5, 3 4 3,4,5,,7 or single lamps ADR 4/00 ADR 4/00 3 ADR /00 Cat. Rear Direction 4 ADR 4/00 5 ADR 4/00 ADR 47/00 7 ADR /00 ADR 45/0 or ADR 74/00 0 ADR /00 ADR 4/00 ADR 45/0 3 ADR /00 Cat. Front Direction 4 ADR 50/00 5 ADR 4/00 ADR 4/00 ADR 47/00 Driving Lamps (optional) SEMI TRAILER 3 3 5, 4 3, 4, 5,, 7 or single lamps Rear of Prime Mover and Trailer have same lighting requirements. 0 0
3 SINGLE TRAILER , 5, 3, 4, 5,, 7 Rear of truck and trailer have same lighting requirements 4 4 COACH 0 0 5, 3 4 3, 4, 5,, 7 or single lamps
4 SMALL TRAILER No. 3, 4, 5,, 7 or Single Lamps 3 ADR 4/00 ADR 4/00 3 ADR /00 Cat. Rear Direction 4 ADR 4/00 5 ADR 4/00 ADR 47/00 7 ADR /00 ADR 45/0 or ADR 74/00 0 ADR /00 ADR 4/00 ADR 45/0 3 ADR /00 Cat. Front Direction 4 ADR 50/00 5 ADR 4/00 ADR 4/00 ADR 47/00 Driving Lamps (optional) BOAT TRAILER 3, 4, 5,, 7 or single lamps
5 No. ADR 4/00 ADR 4/00 3 ADR /00 Cat. Rear Direction 4 ADR 4/00 5 ADR 4/00 ADR 47/00 7 ADR /00 ADR 45/0 or ADR 74/00 0 ADR /00 ADR 4/00 ADR 45/0 3 ADR /00 Cat. Front Direction 4 ADR 50/00 5 ADR 4/00 ADR 4/00 ADR 47/00 Driving Lamps (optional) HORSE FLOAT mounting 3, 4, 5,, 7 or single lamps CARAVAN 3, 4, 5,, 7
Certificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
TRUCKS, BUSES, MPVs: FEDERAL LIGHTING EQUIPMENT LOCATION REQUIREMENTS. BASIC EQUIPMENT REQUIRED ON ALL TRUCKS, BUSES & MPVs
TRUCKS, BUSES, MPVs: FEDERAL LIGHTING EQUIPMENT LOCATION REQUIREMENTS IMPORTANT NOTE: Every lamp, reflex reflector, and conspicuity treatment (device) must be permanently attached in the location specified
Heavy Vehicle Visibility
Heavy Vehicle Visibility Industry Technical Council Advisory Procedure Printed by 3M Traffic Safety Systems in the interest of improving truck safety, through greater visibility Disclaimers This Code of
Certificate of Appointment. Eurofins Product Service GmbH
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
High Lift - 50mm to 150mm (Design) CODE LS9
High Lift - 50mm to 150mm (Design) CODE LS9 Code LS9 does not apply to ADR category L-group vehicles, including motor cycles. 1. Scope Code LS9 provides for the preparation of designs that may be approved
E/ECE/324/Rev.1/Add.47/Rev.6/Amend.4 E/ECE/TRANS/505/Rev.1/Add.47/Rev.6/Amend.4
24 February 2011 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
HELLA India Lighting Ltd
COMMERCIAL VEHICLES PRODUCT CATALOGUE Signal Lamp - HELLA India Lighting Ltd 6A, 6th Floor, Platinum Tower 184, Udyog Vihar Phase - I Gurgaon - 122016 (Haryana) Phone: +91 124 4658600 Fax: +91 124 4658699
What action is expected to take place in the foreseeable future in ADRs with regard to seat belts on school buses?
Feasibility Study for a Trial of Seat Belts on Contract School Buses Operating in Non Public Transport Areas of Western Australia Debra Swadling and Shannon Newman ARRB Transport Research Ltd. ARRB Transport
Guideline for Multi-combination Vehicles
Guideline for Multi-combination Vehicles Road Trains B-doubles B-triples AB-triples BAB-quads ABB-quads in Queensland Form Number 1 Version 11 July 2013 TABLE OF CONTENTS SECTION CONTENT PAGE 1 Statutory
Medical & Surgical Lighting Pty Ltd SERIES 1 & 3 MEDICAL EXAMINATION LIGHTS
Medical & Surgical Lighting Pty Ltd SERIES 1 & 3 MEDICAL EXAMINATION LIGHTS Introduction Medical & Surgical Lighting Pty Ltd (MSL) is an Australian company specialising in the design and manufacture of
Certificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
Free-Form Optics. Heavy Duty Bulb. Heavy Duty Mounts
Free-Form Optics Nordic Lights through their expertise in lens and reflector technology offer a range of light patterns to satisfy the varied and specialist lighting requirements of the mining, heavy duty
LIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 16 th December Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on Amd. 2 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 Automotive Vehicles - Rear - View Mirrors Specification
Contents. Page. Page 2 of 9
"A" Frame Towing Contents Page Introduction 3 Towed mass Ratio 3 Coupling design 3 Towbar 5 Towing capacity of towing vehicle 6 Braking requirements 6 Lighting requirements 6 Steering requirements 7 Loads
Draft Proposal for 01 series of amendments to UN Regulation No.0 (International Whole Vehicle Type Approval)
Transmitted by IWVTA IWG document WP.29-175-14(IWVTA-27-04) Draft Proposal for 01 series of to UN Regulation No.0 (International Whole Vehicle Type Approval) Annex 4 of UN Regulation No.0, amends to read;
b) two pairs of dipped-beam headlamps if the vehicle was first registered anywhere between 1 January 1977 and 31 March 1980, or
Correct as at 23rd November 2013. It may be superseded at any time. Extract taken from: NZTA Vehicle Portal > VIRMs > In-service certification (WoF) > General vehicles > Lighting 4 Lighting 4-1 Headlamps
LED SAFETY LIGHTING CATALOGUE
LED SAFETY LIGHTING CATALOGUE Peterson Manufacturing A Company You Can Trust Peterson Manufacturing is headquartered in a modern 670,000 square foot facility near Kansas City, Missouri, USA. Since 1945,
GENR8 GLOBE CATALOGUE when performance matters UNITS LIGHTING ACCESSORIES
GENR8 GLOBE CATALOGUE 2008-200 UNITS LIGHTING ACCESSORIES Automotive Globes LIGHTING CONTENTS H1 H2 H3 H4 P2 P2 P2 P3 H5 H7 H H11 P3 P3 P4 P4 HB1 HB3 HB4 P4 P4 P5 GLOBE P5, 6, 7 FESTOON P7, 8 XENON GAS
LIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 29 th February Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 4. AIS-002 Automotive Vehicles - Rear - View Mirrors Specification
KNOTT-AVONRIDE LTD. Welcomes You To Our Trailer Type Approval Seminar. O 1 & O 2 Trailers
KNOTT-AVONRIDE LTD Welcomes You To Our Trailer Type Approval Seminar O 1 & O 2 Trailers What You Can Do To Help Yourself? Minimise costs initial and ongoing Limit effort and time required Plan for future
TRAILER PASSPORT. instruction manual maintenance warranty
TRAILER PASSPORT instruction manual maintenance warranty trailer model article no. vehicle identity number initial registration date of transfer name and signature of your respo representative 1 Congratulations!
Queensland Code of Practice
Queensland Code of Practice Vehicle Modifications Version 1.0 November 2012 The State of Queensland (Department of Transport and Main Roads) 2012 http://creativecommons.org/licences/by/2.5/au This work
Conformity of Production Compliance Statement
Conformity of Production Compliance Statement VCA as the Type for the United Kingdom has conducted an assessment of the quality systems and the relevant control plans in order to verify Compliance with
Tail lamps Execution Note:
Depending on the specification of the vehicle when it is ordered, the vehicle is delivered with one of the following tail lamps: Contact a Scania dealer for more information. Compact 7-chamber lamp assembly
Commercial CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS
CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS SECTION 1 EVENTS, NEWS, MEMBERSHIP SERVICES & GENERAL INFORMATION SECTION 2 GENERAL TECHNICAL & IVA SECTION 3 UN ECE
Economic and Social Council
UNITED NATIONS E Economic and Social Council Distr. GENERAL 18 December 2009 Original: ENGLISH ECONOMIC COMMISSION FOR EUROPE INLAND TRANSPORT COMMITTEE World Forum for Harmonization of Vehicle Regulations
NSW Road Train Modernisation Program B-Triple & AB-Triple Operating Conditions
NSW Road Train Modernisation Program B-Triple & AB-Triple Operating Conditions Application These operating conditions apply to: B-Triples, which are a vehicle combinations consisting of a prime mover towing
ALLIANCE LED LIGHTING
ALLIANCE LED LIGHTING Original unique product design Used in harsh industries including transport, 4x4, marine trailer and Australian defence forces Quality LEDs and associated components Products manufactured
AUTOMOTIVE INDUSTRY STANDARD PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE
AUTOMOTIVE INDUSTRY STANDARD Installation Requirements of Lighting and Light-Signalling Devices for Motor Vehicle having more than Three Wheels, Trailer and Semi-Trailer excluding Agricultural Tractor
Conformity of Production Compliance Statement
Conformity of Production Compliance Statement VCA as the Type for the United Kingdom has conducted an assessment of the quality systems and the relevant control plans in order to verify Compliance with
Light up your lifestyle
www.osram.com/ledriving-golf6 Light up your lifestyle OSRAM has a daring new look for your Golf VI. Make the switch to the distinctive LEDriving XENARC Golf VI headlights that packs the brilliant power
LED LIGHTING PARTS GUIDE
LED LIGHTING PARTS GUIDE ADR Better Parts. Good Prices. Alliance Truck Parts. LED LIGHTING PARTS GUIDE www.alliancetruckparts.com.au Page 1 Alliance LED Lighting A range of high performance, reliable LED
Finalization of Annex 4 of UN Regulation No.0
Transmitted by IWVTA Informal Group Finalization of Annex 4 of UN Regulation No.0 document WP.29-172-12 (172nd WP.29, agenda item 4.3) 1. R14/08 removing requirements for CRS anchorage is expected to be
Conformity of Production Compliance Statement
Conformity of Production Compliance Statement VCA as the Type for the United Kingdom has conducted an assessment of the quality systems and the relevant control plans in order to verify Compliance with
JUNE Livestock Transport
JUNE 2007 Livestock Transport INFORMATION Bulletin Introduction This information bulletin provides information that is relevant to operators and drivers involved in the transport of livestock. It details
Basis of this document is: Addendum 47: Regulation No. 48
Transmitted by IWG SLR Informal document GRE-73-03 (73rd GRE, 14 17 April 2015, agenda item 4) Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts
Harness & Lighting System. Trucks, buses, trailers and machinery
Harness & Lighting System Trucks, buses, trailers and machinery al, Long Lasting Quality Innovated Harness System The key to this system is its flexibility by offering every conceivable option for various
In-service certification (WoF and CoF) - Forklifts
In-service certification (WoF and CoF) - Forklifts Correct as at 23rd October 2018. It may be superseded at any time. 1 Introduction Inspection and certification of forklifts: Warrant of fitness requirements
STATUTORY INSTRUMENTS. S.I. No. 127 of 2009 EUROPEAN COMMUNITIES (MOTOR VEHICLES TYPE APPROVAL) REGULATIONS 2009
STATUTORY INSTRUMENTS S.I. No. 127 of 2009 EUROPEAN COMMUNITIES (MOTOR VEHICLES TYPE APPROVAL) REGULATIONS 2009 (Prn. A9/0479) 2 [127] S.I. No. 127 of 2009 EUROPEAN COMMUNITIES (MOTOR VEHICLES TYPE APPROVAL)
Conspicuity marking requirements on goods vehicles
Conspicuity marking requirements on goods vehicles C E1 104 R 0001 0001148 001 011 148 FTA Compliance Guide Edition 2 February 2011 Delivering safe, efficient, sustainable logistics FTA compliance guide
VEHICLE LAMPS, BEACONS & REFLECTORS
VEHICLE LAMPS, BEACONS & REFLECTORS CALL 0383 7984 ORDER ONLINE unitedindustrial.co.uk FREE DELIVERY ON ORDERS OVER 75* BEACONS /4V Rotating Beacon Bolt Mounted Suitable for both V and 4V applications.
Sr. No. AIS No.` and its Amendment/s. Title
LIST OF PUBLISHED AUTOMOTIVE INDUSTRY STANDARDS (Updated on March 22, 2019) AISC standards are available on this website only for reference. AISC Secretariat at ARAI reserves copy right for reproduction/
(Text with EEA relevance)
28.4.2011 Official Journal of the European Union L 108/13 COMMISSION REGULATION (EU) No 407/2011 of 27 April 2011 amending (EC) No 661/2009 of the European Parliament and of the Council as regards the
Glazing, Windscreen Wipe and Wash, and Mirrors 1999
October 1999 Glazing, Windscreen Wipe and Wash, and Mirrors 1999 AC No.2/32012 What is this advisory circular about? This advisory circular contains information about Land Transport Rule: Glazing, Windscreen
Automotive Lighting. Catalogue.
Automotive Lighting Catalogue www.invisionsales.com Over 130 years of changing the world GE Aviation is one of the world s leading aircraft engine suppliers. In 2016, GE was the second largest wind turbine
Information Bulletin. Fire Pump Battery Failures. Version 1.1 Approved for release August 2011
Version 1.1 Approved for release August 21 1.0 Purpose Statement The purpose of this is to raise awareness amongst stakeholders about concerning industry trends associated with batteries supporting fire
FORM 20 (See Rule 47)
To. The Registration Authority, 1 FORM 20 (See Rule 47) Form of Application for Registration of a Motor Vehicle 1. Full name of person to be registered as registered owner son / wife / daughter of 2. Age
Electric Vehicles Engineering Approval Evaluation Program 电动汽车定型试验规程
Translated English of Chinese Standard: GB/T18388-2005 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 43.080.01 T 47 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC
Informal document No. 5 (47th GRE, 1-5 October 2001, agenda item 5.8.)
Informal document No. 5 (47th GRE, 1-5 October 2001, agenda item 5.8.) Date: 4-6-01 Subject: Revision of Standards for 42V Automotive Electrical Systems To: Economic Commission for Europe Please recall
APPENDIX 2-C-1 UN REGULATIONS APPLIED BY BOTH PARTIES
APPENDIX 2-C-1 UN REGULATIONS APPLIED BY BOTH PARTIES Regulation 3 Uniform provisions concerning the approval of retro-reflecting devices for powerdriven vehicles and their trailers 4 Uniform provisions
Level 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Delsa Marmi Pty Ltd
Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Delsa Marmi Pty Ltd Trading as Delsa Marmi Pty Ltd the right to use the WaterMark as shown above
E/ECE/324/Rev.1/Add.47/Rev.12 E/ECE/TRANS/505/Rev.1/Add.47/Rev.12
16 October 2014 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be fitted and/or be used on Wheeled Vehicles and the Conditions
Economic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2016/83 Distr.: General 31 August 2016 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
E/ECE/324/Add.3/Rev.3 E/ECE/TRANS/505/Add.3/Rev.3
19 August 2013 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for
28 Exhaust emissions standard compliance
Correct as at 7th June 2013. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > Entry certification > Technical bulletins > Exhaust emissions standard compliance 28 Exhaust
3-2 Determining frontal impact compliance
Correct as at 11th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > Entry certification > Inspection and certification > Vehicle structure > Determining frontal
Contour Marking GRE Ad 'hoc meeting 25/11/2004
The Truck industry is very sensitive to improve safety Commercial Vehicles manufacturers are strongly committed to improving road safety through continual advances in active and passive safety of their
Australian/New Zealand Standard
AS/NZS 1425:2007 AS/NZS 1425:2007 Australian/New Zealand Standard LP Gas fuel systems for vehicle engines AS/NZS 1425:2007 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
Proposal for a new 07 series of amendments to Regulation No. 48 (Installation of lighting and light-signalling devices)
Submitted by the expert from The Netherlands and Italy Informal document GRE-79-29 (79 th GRE, 24-27 April 2018, agenda item 6 (b)) Proposal for a new 07 series of amendments to Regulation No. 48 (Installation
E/ECE/324/Rev.1/Add.90/Rev.3 E/ECE/TRANS/505/Rev.1/Add.90/Rev.3
2 December 2013 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
HIGHWAY TRAFFIC ACT DRIVER S LICENSES REGULATIONS
c t HIGHWAY TRAFFIC ACT DRIVER S LICENSES REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to May 6, 2017. It is
Contents SAE Compliant LED Lamps
Contents Compliant Lamps Euro Series54 110mm Round Lamps 54-55 Dura Series 56-57 Dura Surface Mount Marker Lamps 58 Recess Mount Clearance Lamps 59 Centre High Mount Stop Lamps 60-61 Daytime Running Lamps
Drawing and dimensions / Zeichnung und Abmaße
Template: ZOT 10000028 Page 1 of 6 Drawing and dimensions / Zeichnung und Abmaße not in scale / nicht maßstäblich general tolerances according / Allgemeintoleranzen nach ISO 2768-mH Pinning and connector
8-7 Heavy vehicle kingpin or socket coupling (for towing a semi-trailer)
Correct as at 15th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > Heavy trailers > Towing connections > Heavy vehicle
28 Exhaust emissions standard compliance
Correct as at 11th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > Entry certification > Technical bulletins > Exhaust emissions standard compliance 28 Exhaust
INFORMATION FOR OWNERS AND OPERATORS OF HEAVY TRUCKS AND BUSES
VEHICLE STANDARDS BULLETIN 2 BULLETIN TITLE MAXIMUM ROAD SPEED LIMITING FOR HEAVY TRUCKS AND BUSES INITIATED BY Vehicle Safety Standards DATE OF ISSUE October 1990 DATE OF EFFECT 1 January 1991 AN INFORMATION
Importing Toyota vehicles into the United Kingdom
Importing Toyota vehicles into the United Kingdom We recommend that you do not bring your vehicle into the UK without first contacting the DVLA and your insurance provider 1. Vehicles originating from
G6B 30/11/17 x G6C 27/07/17 1
CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS SECTION 1 EVENTS, NEWS, MEMBERSHIP SERVICES, LEGAL & GENERAL INFORMATION SECTION 2 GENERAL TECHNICAL INFORMATION SECTION
Heavy Vehicle Mass Limits
Heavy Vehicle Mass Limits JULY 2010 This fact sheet outlines the maximum mass allowed for various vehicle, trailer and combination types when travelling in New South Wales. Rigid Trucks General Access
Table 1 of Required lamps and reflectors on commercial motor vehicles
Table 1 of 393.11 Required lamps and reflectors on commercial motor vehicles Item on the vehicle Quantity Color Location Position Height above the road surface in millimeters (mm) (with English units in
Application chart / Tableau Des Doses D application Tabla De Aplication / Tabella di Applicazione / Quadro de Aplicaco
Particular Guide-line for : 10 Inch Rims 13 Inch Rims Boat trailers, Horse Box trailers, 145/70 10 150 175/60 13 250 Utility Trailers & Towing caravans 145/80 10 150 185/60 13 250 6 200 155/60 10 150 195/60
When registering a vehicle on the Satellic Road User Portal (RUP) or at a Service Point you will be asked to:
Vehicle documents guide SLOVAKIA V1.3 09-02-2018 All heavy goods vehicles with a Gross Vehicle Weight of more than 3.5 tonnes (since 1 April 2016), as well as all semi-trailer tractors of the N1 category
Offshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD)
Offshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD) 1. INTRODUCTION This guideline has been prepared to alleviate confusion regarding the difference in Rule requirements
E/ECE/324/Rev.1/Add.47/Rev.7 E/ECE/TRANS/505/Rev.1/Add.47/Rev.7
17 January 2013 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be fitted and/or be used on Wheeled Vehicles and the Conditions
REGULATIONS Official Journal of the European Union L 200/1
31.7.2009 Official Journal of the European Union L 200/1 I (Acts adopted under the EC Treaty/Euratom Treaty whose publication is obligatory) REGULATIONS REGULATION (EC) No 661/2009 OF THE EUROPEAN PARLIAMENT
PRODUCT MANUAL. Heavy Duty Shoulder Sprayer 5L & 8L
PRODUCT MANUAL SUPERIOR PERFORMANCE Heavy Duty Shoulder Sprayer 5L & 8L Contents E A B I H F D C G A. Pump Handle with lance holder B. Safety Valve C. Spray Bottle D. Pump Assembly E. Stainless steel lance
Note: Do NOT mix LED and incandescent lamps in the same circuit!
Light Up Your Modified Car Some Hot Rod lights are hard to see. Your teardrop lights may look cool, but the 5W incandescent lamp that came with it just doesn t light up bright enough to show others you
Maritime New Zealand Guidelines
Maritime New Zealand Guidelines MARINE GUIDANCE NOTICE ISSUE 02-2007 VEHICLE REQUIREMENTS FOR SHIPMENT BY RO-RO This guidance is for: Any person who offers vehicles for carriage by a ro-ro ship Ro-ro ship
b) two pairs of dipped-beam headlamps if the vehicle was first registered anywhere between 1 January 1977 and 31 March 1980, or
Correct as at 15th April 2014. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > General vehicles > Lighting > Headlamps 4-1 Headlamps
SIRA ROAD SIGNS AND LIGHTING. Rear reflecting panels for bulky goods. Panels for trucks drive. Kit 2 truck panels size mm 140x565
Rear reflecting panels for bulky goods Panels for trucks drive G 20442 G 20443 Kit 2 truck panels size mm 140x565 Kit 2 truck panels size mm 140x565 according to regulation ECE ONU 70 amendment 01 Panels
Economic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRE/2018/19 Distr.: General 8 February 2018 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
Both the caravan (or camper-trailer) and the tow-vehicle must be legal/compliant and in a safe condition.
Caravan Inspections Pre-Holiday, or Anytime! Target Zero (Caravan Accidents) We want everyone in Australia who tows a caravan or camper-trailer to have it inspected before they take to the road, to ensure
Clyde Waste Transfer Facility Quarterly Truck Noise Measurements April 2009
REPORT 10-6815-R3 Quarterly Truck Noise Measurements April 2009 PREPARED FOR Cnr Unwin & Shirley Street ROSEHILL NSW 2142 30 APRIL 2009 HEGGIES PTY LTD ABN 29 001 584 612 Quarterly Truck Noise Measurements
E/ECE/324/Rev.1/Add.97/Rev.3 E/ECE/TRANS/505/Rev.1/Add.97/Rev.3
23 February 2012 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions
REGULATIONS ON TECHNICAL REQUIREMENTS AND APPROVAL OF VEHICLES, COMPONENTS AND EQUIPMENT (KJØRETØYFORSKRIFTEN OF OCTOBER 4, 1994)
ORIGINAL :KJØRETØYFORSKRIFTEN of October 4, 1994 REGULATIONS ON TECHNICAL REQUIREMENTS AND APPROVAL OF VEHICLES, COMPONENTS AND EQUIPMENT (KJØRETØYFORSKRIFTEN OF OCTOBER 4, 1994) CHAPTER 28 LAMPS, LIGHT
8-6 Heavy vehicle fifth wheel or ball coupling (for towing a semi-trailer)
Correct as at 3rd September 2018. It may be superseded at any time. Extract taken: from NZTA Vehicle Portal > VIRMs > In-service certification (WoF and CoF) > Heavy trailers > Towing connections > Heavy
First draft for Regulation 112 to demonstrate the application of the HRD. Regulation No. 112
First draft for Regulation 112 to demonstrate the application of the HRD E/ECE/324/Rev.2/Add.111/Rev.3 17. October 2014 Regulation No. 112 Contents Annexes Uniform provisions concerning the approval of
DRAFT AUTOMOTIVE INDUSTRY STANDARD
DRAFT AUTOMOTIVE INDUSTRY STANDARD Provisions of motor vehicle headlamps emitting a symmetrical passing beam or a driving beam or both and equipped with filament, gasdischarge light sources or LED Modules
Fall. Competition Rules for 2019 Version 2
Fall 08 Competition Rules for 2019 Version 2 1 GENERAL INDEX 2 AUTHORITY 3 PROMOTER 4 VEHICLE COMPETITION CLASSES 5 SCRAWA COMPETITION REGISTRATION 6 ELIGIBILITY 8 COACHWORK 1.1 Aerodynamic aids 1.2 Body
ESS Lighting Instruction Pack Original Energy Saver
ESS Lighting Instruction Pack Original Energy Saver For projects completed: AFTER 1 July 2014 This Instruction Pack is designed to simplify the processing of Energy Savings Certificates for commercial
Downlighters and fire safety
INSTALLERS QUICK REFERENCE GUIDE Downlighters and fire safety This guide provides a quick reference for installers on the appropriate selection and installation of downlighters in domestic premises, and
NEW PRODUCTS SUPERNOVA
NEW PRODUCTS SUPERNOVA www.hella.com HELLA MEANS BUSINESS! HELLA GmbH & Co. KGaA was founded in Germany in 1899. Today HELLA is one of the top forty automotive suppliers in the world, and is listed as
WELLINGTON, NEW ZEALAND
DISALLOWABLE INSTRUMENT WELLINGTON, NEW ZEALAND PURSUANT to sections 152 and 155(a) and (b) of the Land Transport Act 1998, and after having had regard to the criteria specified in section 164(2) of that
Economic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2018/82 Distr.: General 27 August 2018 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
Gazette GOVERNMENT NOTICES
Commonwealth of Australia Published by the Commonwealth of Australia Gazette GOVERNMENT NOTICES HEAVY VEHICLE NATIONAL LAW NATIONAL CLASS 2 HEAVY VEHICLE ROAD TRAIN AUTHORISATION (NOTICE) 2014 (No. 1)
Importing Motor Vehicles into the United States
Importing Motor Vehicles into the United States Presentation for the AAMVA Annual International Conference August 22, 2017 San Francisco, California Coleman Sachs, Chief, Import and Certification Division
VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014)
FEDERAL CHAMBER OF AUTOMOTIVE INDUSTRIES VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014) This code is prepared under the direction of the FCAl Board,
E/ECE/324/Add.5/Rev.6/Amend.2 E/ECE/TRANS/505/Add.5/Rev.6/Amend.2
5 December 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
ANNEXES. to the. Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
EUROPEAN COMMISSION Brussels, 17.5.2018 COM(2018) 286 final ANNEXES 1 to 6 ANNEXES to the Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on type-approval requirements for motor
A Guide to the London Emission Zone
A Guide to the London Emission Zone Come the 3 rd January 2012 changes and indeed charges will be made against vehicles that do not comply with new emission standards brought in by London Mayor Boris Johnson