C e r t i f i c a t e
|
|
|
- Magnus Nelson
- 6 years ago
- Views:
Transcription
1 C e r t i f i c a t e of Constancy of Performance Certificate No.: 0560-CPR Issue: 08 In compliance with the procedure specified in RD_090, Telefication declares as designated Notified Body for the European Construction Products Regulation, that the stated products, evaluated according Annex 1 of this certificate, are in conformity with Regulation (EU) No 305/2011, based on the applicable Technical Standards and Specifications as listed under Annex 2 of this Certificate. Product description: Digital Public Address and Emergency Sound System Trademark: See annex 3 Family name: Praesideo Type designation: See annex 3 Serial No: See annex 3 Software release No: See annex 3 Manufacturer: Bosch Security Systems B.V. Address: Torenallee 49 City: 5617 BA Eindhoven Country: Netherlands This certificate is granted to: Name: Bosch Security Systems B.V. Address: Torenallee 49 City: 5617 BA Eindhoven Country: Netherlands This certificate is valid as long as the requirements laid down in the technical specification(s) listed in Annex II do not change, and the product and the manufacturing conditions in the factory and the factory production control are not modified significantly. This certificate has THREE Annexes. Zevenaar, 05 March 2015 W.J.M. Jong Manager Product Certification
2 Annex 2 to Certificate of Constancy of Performance 05 March 2015 Number: 0560-CPR Annex 2, Page 1 of 3 Each product to which this Certificate of Constancy of Performance relates (see Annex 3 of this certificate), has been placed under the scope of the Construction Products Directive by EU Commission decision 96/577/EC and therefore falls under the Construction Products Regulation 305/2011 after July 1 st There is a presumption of conformity with respect to the requirements as listed in Annex I of the Construction Products Directive and Construction Products Regulation 305/2011, when all applicable harmonised standards listed in the Official Journal of the EU are being applied. This certificate is part of the Assessment and Verification of Constancy of Performance system 1, as described in annex V of the Construction Products Regulation and made applicable by EU Commission decision 96/577/EC. The validity of this Certificate of Constancy of Performance is limited to products, which are equal to the one(s) assessed for this Certificate of Constancy of Performance (see Annex 3 of this certificate). When the manufacturer (or holder of this Certificate of Constancy of Performance) is placing the products on the European market, he is obliged to label the products with the prescribed CE logo and the Notified Body number of Telefication: The CE logo stands for conformity to all applicable directives. This Certificate of Constancy of Performance is limited to the Construction Products Regulation. Remarks and observations The following conditions are applicable: The tested configuration of the Praesideo system is representative for comparable combinations of components as identified in annex 3 of this certificate. Each component may be installed multiple times into a Praesideo system. The installer is responsible for the correct selection of components and EN compliance of the completely installed system. EN compliance of the Praesideo system is only achieved if the installer fulfills all installer specific requirements as stated in the EN compliance checklist in the installation and user instructions. Certification of the Praesideo Digital Public Address and Emergency Sound System includes the cabinets (i.e. the enclosed 19" racks) in which the system components are mounted. It is allowed to use one or more cabinets, depending on the size of the Praesideo system. Within the same cabinet family different heights are allowed up to a maximum height that depends on the brand and type of an approved cabinet. The following cabinets have been approved for use with Praesideo: Rittal TS8 series, with lockable glass door, side panels, temperature controlled top fans and having a fixed frame with a maximum height of 42 HU or a lockable swing frame with a maximum height of 40 HU. Only batteries as mentioned in the user manuals of the battery chargers are allowed to be used and must be placed on the ground plane of the cabinet, free from the walls PRAESIDEO Schroff cabinet The power supply system ZDSO400E-AK3 can consist of: main power supply ZDSO-400-E, additional power supply ZDSOR-400-E, additional power supply ZDSOT-400-E, distribution panel PD- 2U-x, battery circuit resistance measurer RMB-1.
3 Annex 2 to Certificate of Constancy of Performance 05 March 2015 Number: 0560-CPR Annex 2, Page 2 of 3 Essential Characteristics of EN 54-16: Clauses: Performance: Performance under fire condition 4, 5, 7, 10, 12, 16.5, 16.6, 16.7 Pass Response delay (response time to fire) 7.1, 7.8, 12 Pass 7.4 N/A Operation reliability 4, 5, 6, 7, 8, 11, 12, 13, 14 Pass 9 N/A Temperature resistance 16.4, 16.8 Pass Impact and vibration resistance 16.11, 16.12, Pass Electrical stability 16.14, Pass Humidity resistance 16.9, Pass Implemented optional functions with requirements (per clause of EN 54-16): 7.3 Audible warning Manual silencing of the voice alarm condition Manual reset of the voice alarm condition 7.8 Output to fire alarm devices 7.9 Voice alarm condition output 8.3 Indication of faults related to the transmission path to the CIE 8.4 Indication of fault related to voice alarm zones 10 Voice alarm manual control 11 Interface to external control device(s) 12 Emergency microphone(s) Redundant power amplifiers The battery mid-point monitor, model SD08 from Alpha Technologies Ltd., may be used with the PRS- 48CH12 battery charger and mounted in the cabinet, but is excluded from certification. The Cobranet Interface is only EN compliant in combination with the Hirschmann Switch RSR M2M2T1UCCHPHH The Hirschmann Switch may also be used to connect, within the cabinet, other EN54-16 compliant products as listed in annex 3. There are five Praesideo systems possible: * Praesideo 3.5 system based on network controller PRS-NCO-B and PRS-SW software version 3.5x (where x can be 0, 1, 2 or 3) * Praesideo 3.6 system based on network controller PRS-NCO-B and PRS-SW software version 3.6y (where y can be 0 or 1) * Praesideo 4.0 system based on network controller PRS-NCO3 and PRS-SW software version 4.0y (where y can be 0 or 1) * Praesideo 4.1 system based on network controller PRS-NCO3 and PRS-SW software version 4.1 * Praesideo 4.3 system based on network controller PRS-NCO3 and PRS-SW software version 4.3 For proper operation with the Line Isolator System, consisting of the PM1-LISM6 master unit and slave devices PM1-LISS and PM1-LISD, the multi-channel interface PRS-16MCI must have hardware version HW 04/15 or newer. Essential Characteristics of EN 54-4: Clauses: Performance: Performance under fire condition 4, 5, 6 Pass Operation reliability 4, 5, 6, 7, 8 Pass Temperature resistance 9.5 Pass vibration resistance 9.7, 9.8, 9.15 Pass Electrical stability 9.9 to 9.13 Pass Humidity resistance 9.6, 9.14 Pass
4 Annex 2 to Certificate of Constancy of Performance 05 March 2015 Number: 0560-CPR Annex 2, Page 3 of 3 Documentation lodged for this Certificate of Constancy of Performance Test Reports: - Telefication B.V.: Rev.1.00, 03 September CNPP: , 23 July CNPP: , 17 March Telefication B.V.: Ver.1.00, 29 January VdS GmbH: BMA 11111, 12 January Telefication B.V.: Rev.1.10, 03 September Telefication B.V.: Ver. 1.00, 06 March Telefication B.V.: Ver. 1.00, 28 March Telefication B.V.: Ver. 2.00, 12 February 2015 Product Documentation: - Assembly drawings - Bill of materials - Block diagram - Electric diagrams - Photos - User manual - Manufacturer's declarations Technical Standards and Specifications The product shows no non-compliances with: - EN : December, EN /A1: April, EN /A2: January, EN 54-16: March, EN 54-4: EN 54-4: A1, EN 54-4: A2, 2006 Technical features and characteristics The product includes the following features and characteristics: Voice Alarm Equipment - 100V loudspeaker outputs
5 Number: 0560-CPR Annex 3, Page 1 of 7 The product as described in this certificate includes the following type designations: - Product description: Digital Public Address and Emergency Sound System - Type Designation: Praesideo Software version: 3.5x (where x can be 0,1,2 or 3) - Product description: Digital Public Address and Emergency Sound System - Type Designation: Praesideo Software version: 3.6y (where y can be 0 or 1) - Product description: Digital Public Address and Emergency Sound System - Type Designation: Praesideo Software version: 4.0y (where y can be 0 or 1) - Product description: Digital Public Address and Emergency Sound System - Type Designation: Praesideo Software version: Product description: Digital Public Address and Emergency Sound System - Type Designation: Praesideo Software version: Product description: 48 VDC Battery Charger - Type Designation: PRS-48CH12 - Product description: 48 VDC Battery Charger - Trademark: PSD - Type Designation: PRS-48CHxx-DE (where xx can be 02, 05, 06 or 07) - Product description: Audio Expander - Type Designation: LBB4402/00 - Hardware version: 16/15 - Product description: Audio Expander Analogue - Type Designation: PRS-4AEX4 - Hardware version: 20/00 - Software version: 3.61 & 4.1 & 4.3
6 Number: 0560-CPR Annex 3, Page 2 of 7 - Product description: Basic Amplifier 1 x 500 W - Type Designation: PRS-1B500 - Hardware version: 06/05 & 06/10 & 06/15 - Product description: Basic Amplifier 1 x 500 W - Type Designation: PRS-1B500-EU - Hardware version: 06/05 & 06/10 & 06/15 - Product description: Basic Amplifier 2 x 250 W - Type Designation: PRS-2B250 - Hardware version: 06/05 & 06/10 & 06/15 - Product description: Basic Amplifier 2 x 250 W - Type Designation: PRS-2B250-EU - Hardware version: 06/05 & 06/10 & 06/15 - Product description: Basic Amplifier 4 x 125 W - Type Designation: PRS-4B125 - Hardware version: 06/05 & 07/00 & 07/05 - Product description: Basic Amplifier 4 x 125 W - Type Designation: PRS-4B125-EU - Hardware version: 06/05 & 07/00 & 07/05 - Product description: Basic Amplifier 8 x 60 W - Type Designation: PRS-8B060 - Hardware version: 06/05 & 07/05 - Product description: Basic Amplifier 8 x 60 W - Type Designation: PRS-8B060-EU - Hardware version: 06/05 & 07/05 - Product description: Basic Call Station - Type Designation: LBB4430/00 - Hardware version: 06/15
7 Number: 0560-CPR Annex 3, Page 3 of 7 - Product description: Call Stacker - Type Designation: PRS-CRF - Hardware version: 01/10 & 06/10 - Product description: Call Station Interface - Type Designation: PRS-CSI - Hardware version: 01/15 & 01/20 & 01/30 - Product description: Call Station Keypad - Type Designation: LBB4432/00 - Hardware version: 01/18 & 01/19 - Product description: Call Station Keypad Module - Type Designation: PRS-CSKPM - Hardware version: 11/00 - Product description: Calll Station Module - Type Designation: PRS-CSM - Hardware version: 11/00 - Product description: Cobranet Interface - Type Designation: LBB4404/00 - Hardware version: 03/10 & 03/15 & 03/20 - Product description: EOL Supervision Board - Type Designation: LBB4443/00 - Hardware version: 01/05 - Product description: Fiber Interface - Type Designation: PRS-FIN - Hardware version: 03/15
8 Number: 0560-CPR Annex 3, Page 4 of 7 - Product description: Fiber Interface Non-Addressable - Type Designation: PRS-FINNA - Hardware version: 03/15 - Product description: Fiber Interface Single-Mode - Type Designation: PRS-FINS - Hardware version: 03/15 - Product description: IP Audio Interface - Type Designation: PRS-1AIP1 - Hardware version: Product description: Line Supervision Set - Type Designation: LBB4442/00 - Hardware version: 01/10 - Product description: Loudspeaker DC blocking board - Type Designation: PM1-LISD - Hardware version: 01/00 - Product description: Loudspeaker Line Isolator System Master - Type Designation: PM1-LISM6 - Hardware version: 01/00 & 01/05 - Product description: Loudspeaker Line Isolator with housing - Type Designation: PM1-LISS - Hardware version: 01/00 - Product description: LSP Supervision Board - Type Designation: LBB4441/00 - Hardware version: 01/05 - Product description: Multichannel Interface - Type Designation: PRS-16MCI - Hardware version: 04/10 & 04/15
9 Number: 0560-CPR Annex 3, Page 5 of 7 - Product description: Network Controller - Type Designation: PRS-NCO3 - Hardware version: 30/00 & 30/10 & 30/15 - Software version: 4.0y & 4.1 & Product description: Network Controller - Type Designation: PRS-NCO-B - Hardware version: 21/05 & 21/08 - Software version: 3.5x & 3.6y - Product description: Network Splitter - Type Designation: PRS-NSP - Hardware version: 03/15 & 03/20 - Product description: Numeric Keypad - Type Designation: PRS-CSNKP - Hardware version: 01/18 - Product description: OMNEO Interface - Type Designation: PRS-4OMI4 - Hardware version: 01/00 - Software version: Product description: Power Amplifier 1 x 500 W - Type Designation: PRS-1P500 - Hardware version: 06/05 & 06/10 & 06/15 & 06/20 - Product description: Power Amplifier 1 x 500 W - Type Designation: PRS-1P500-EU - Hardware version: 06/10 & 06/15 & 06/20 - Product description: Power Amplifier 2 x 250 W - Type Designation: PRS-2P250 - Hardware version: 06/05 & 06/10 &06/15 & 06/20
10 Number: 0560-CPR Annex 3, Page 6 of 7 - Product description: Power Amplifier 2 x 250 W - Type Designation: PRS-2P250-EU - Hardware version: 06/10 & 06/15 & 06/20 - Product description: Power Amplifier 4 x 125 W - Type Designation: PRS-4P125 - Hardware version: 06/05 & 06/10 & 06/15 - Product description: Power Amplifier 4 x 125 W - Type Designation: PRS-4P125-EU - Hardware version: 06/10 & 06/15 - Product description: Power Amplifier 8 x 60 W - Type Designation: LBB4428/00 - Hardware version: 04/05 & 05/05 & 06/00 - Product description: Power Amplifier 8 x 60 W - Type Designation: LBB4428/00-EU - Hardware version: 05/05 & 06/00 - Product description: Power supply system with battery backup for Voice Alarm System Praesideo - Trademark: Merawex - Type Designation: ZDSO400E-AK3 - Product description: Praesideo Software - Type Designation: PRS-SW - Software version: 3.5x (where x can be 0,1,2 or 3) - Product description: Praesideo Software - Type Designation: PRS-SW - Software version: 3.6y (where y can be 0 or 1)
11 Number: 0560-CPR Annex 3, Page 7 of 7 - Product description: Praesideo Software - Type Designation: PRS-SW - Software version: 4.0y (where y can be 0 or 1) - Product description: Praesideo Software - Type Designation: PRS-SW - Software version: Product description: Praesideo Software - Type Designation: PRS-SW - Software version: Product description: Remote Call Station - Type Designation: PRS-CSR - Hardware version: 01/15 & 01/20 & 01/30 - Product description: Remote Call Station Module - Type Designation: PRS-CSRM - Hardware version: 11/00 - Product description: SPEC RCS Master - Type Designation: PSP-D Hardware version: 03/15 - Product description: SPEC RCS Slave - Type Designation: PSP-D Hardware version: 03/15 - Product description: Supervision Control Board - Type Designation: LBB4440/00 - Hardware version: 01/05
Evaluation Certificate
SC0414-14 Certificate for a part of a measuring system for LOTW Forecourt controller, FuelNet Manager Issued to CODAB AB Höjdrodergatan 24, SE-212 39 Malmö, Sweden In respect of (part of instrument) Forecourt
Parts Certificate Certificate for a part of a measuring system for LOTW
No. 107030 Wayne ixpay TX secure payment platform, a payment terminal (OPT) for cards Issued to Wayne Fueling Systems Sweden AB Hanögatan 10, SE-211 24 Malmö, Sweden In respect of (part of instrument)
(Text with EEA relevance)
L 150/10 COMMISSION REGULATION (EU) 2015/924 of 8 June 2015 amending Regulation (EU) No 321/2013 concerning the technical specification for interoperability relating to the rolling stock freight wagons
EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR CHANGES
EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR The EU Toy Directive was revised in order to take into account the new technological developments and increasing child safety requirements.
EC Type-Approval Certificate UK2853 Revision 4
UK 2853 V(0)a EC Type-Approval Certificate UK2853 Revision 4 issued by: The National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Non-automatic Weighing Instruments
Certificate of constancy of performance
0402-CPR-SC0221-16 In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction s Regulation or CPR), this certificate applies to the construction
The Council Directive 2009/23/EC on non-automatic weighing instruments.
EC type-approval certificate Page 1 of 5 Issued by In accordance with Manufacturer In respect of Characteristics NMi Certin B.V. Hugo de Grootplein 1 3314 EG Dordrecht The Netherlands The Council Directive
Power supply for fire detection and fire alarm systems, smoke and heat control systems, and other fire protection systems, series ZSP135-DR
Power supply for fire detection and fire alarm systems, smoke and heat control systems, and other fire protection systems, series ZSP135-DR The power supply is a guaranteed source of 24V voltage. The wall
Tillers Motor hoes (combustion engine powered)
Compliance Guide Rev.2.1, Edition 04/2018 This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine powered brush-cutters and grass trimmers in
Official Journal of the European Union. (Non-legislative acts) REGULATIONS
10.1.2019 L 8 I/1 II (Non-legislative acts) REGULATIONS REGULATION (EU) 2019/26 OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 8 January 2019 complementing Union type-approval legislation with regard to
Expansion Signal (XSIG) Card Installation Instructions
Expansion Signal (XSIG) Card Installation Instructions Introduction This publication describes the installation procedure for the Expansion Signal (XSIG) Card (4100-5116). This product is compatible with
ECOMP.3.A EUROPEAN UNION. Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 ENT 229 MI 914 ENV 837 AGRI 596 PREP-BXT 58 CODEC 2164
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 T 229 MI 914 V 837 AGRI 596 PREP-BXT 58 CODEC 2164 LEGISLATIVE ACTS AND OTHER INSTRUMTS
COMMISSION REGULATION (EU) No /.. of XXX
EUROPEAN COMMISSION Brussels, XXX B4 1667206 [ ](2014) XXX DRAFT 30.04.2014 COMMISSION REGULATION (EU) No /.. of XXX supplementing Regulation (EC) No 661/2009 of the European Parliament and of the Council
COMMISSION RECOMMENDATION. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION RECOMMENDATION of XXX on the use of fuel consumption and CO 2 emission values type-approved and measured in accordance with the World Harmonised
EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031
MATERIALPRÜFUNGSAMT NORDRHEI N - WESTFALEN EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation
Interoperability TSIs applicable to Railway vehicles. Innotrans, September, 2010
Interoperability TSIs applicable to Railway vehicles Innotrans, 21-24 September, 2010 1. Purpose of the presentation 2. Geographical scope (Directives and TSIs) 3. Technical scope of TSIs 4. TSIs applicable
Hemidirectional Loudspeaker 100W LS-OC100E-1
Hemidirectional Loudspeaker 100W LS-OC100E-1 en Installation note Hemidirectional Loudspeaker 100W Table of contents en 3 Table of contents 1 Important safeguards 4 2 System overview 5 3 Chain mounting
DEPARTMENT OF HEALTH
DEPARTMENT OF HEALTH Directorate: Radiation Control Private Bag X62 BELLVILLE 7535 Tel: (021) 9486162 Fax: (021) 9461589 Web: http://www.doh.gov.za/department/radiation/01.html MEDEX AFRICA IMPORT AND
Ride-on lawnmowers (combustion engine powered)
Compliance Guide Rev.2.3 Edition 04/2018 Ride-on lawnmowers (combustion engine powered) This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine
COMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX xxx [ ](2016) XXX draft COMMISSION REGULATION (EU) / of XXX correcting Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No
A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?
A brief guide for identification of non-compliant construction machinery Is this Compactor / Roller compliant with European legislation? Introduction Construction equipment placed on the EU market for
Chain-saws (combustion engine powered)
Compliance Guide Rev.4.2, Edition 04/2018 Chain-saws (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68 66 This
Official Journal of the European Communities
1.11.2000 EN Official Journal of the European Communities L 279/33 DIRECTIVE 2000/55/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on energy efficiency requirements for ballasts
EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031
EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative
Digital/Analog Amplifiers Installation Instructions
Digital/Analog Amplifiers Installation Instructions Introduction This publication describes the installation procedure for the 4100U and 4100ES Fire Alarm Control Panels (FACP) family of digital and analog
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY EU TYPE-APPROVAL CERTIFICATE
Communication concerning: EU type-approval extension of EU type-approval refusal of EU type-approval withdrawal of EU type-approval THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY EU TYPE-APPROVAL CERTIFICATE
Flex Amplifiers Installation Instructions
Flex Amplifiers Installation Instructions Introduction This publication describes the installation procedure for the 4100U and 4100ES Flex Amplifiers. This product is compatible with both 4100U and 4100ES
UNI EN ISO EN
Airplus Safeline eneral Upon implementation of the AIRPLUS T series, air-treatment units, PNEUMAX develops a supply and discharge valve, with an electropneumatic control and spring-return, fitted with
Airworthiness Directive
Airworthiness Directive AD No.: 2018-0007 Issued: 10 January 2018 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on behalf of the European
Hedge trimmers (combustion engine powered)
Compliance Guide Rev.2.1 Edition 04/2018 Hedge trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 706 82 37 This
WELMEC External Auxiliary Power Supply of Electrical Energy Meters
WELMEC 11.8 2018 External Auxiliary of Electrical Energy Meters WELMEC is a cooperation between the legal metrology authorities of the Member States of the European Union and EFTA. This document is one
E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1
30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
Co-ordination of the Notified Bodies NB-TOYS under the Safety of Toys Directive
Ref. Ares(2016)1375312-18/03/2016 Co-ordination of the Notified Bodies NB-TOYS under the Safety of Toys Directive NB-TOYS/2016/015 18 Febuary 2016 EC-type approval protocol No. 3 Physical and mechanical
RSB List of Documents and references
Type of document: Reference Document Date: 20 March 2017 RSB List of Documents and references RSB reference code: [RSB-DOC-10-001] Published by the Roundtable on Sustainable Biomaterials. This publication
Datasheet PDCSY-MW-U. Technical Overview. Features. Product warranty and total quality commitment.
Datasheet Ultrasonic Flow Sensors & Integrator Technical Overview Ultrasonic flow sensors have no moving parts in the volume flow, this makes them almost wear free and noiseless. They measure the flow
DIRECTIVE 2006/40/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
L 161/12 EN Official Journal of the European Union 14.6.2006 DIRECTIVE 2006/40/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 relating to emissions from air-conditioning systems in motor
PSU EN54-4 Power Supplies
PSU EN54-4 Power Supplies Ordering: Models, Sales Order Parts: PSU MXP-549 : 1.5A PSE in 7Ah enclosure MXP-550 : 3.0A PSE in 17/18Ah enclosure MXP-550D : 3.0A PSE in 25Ah enclosure MXP-551 : 5.0A PSE in
COMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION REGULATION (EU) / of XXX amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards
Product Evaluation Report
Product Evaluation Report PER-11044 Page 1 of 5 Initial Listing July, 2011 This Document Published By: Re-Approved May, 2018 Listed Product Flat & Raised Panel Cabinet Doors 5.2mm Industrial Panel with
COMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 19.12.2016 C(2016) 8383 final COMMISSION DELEGATED REGULATION (EU) /... of 19.12.2016 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council
Version / Status V 2.0 Date Author. Wagon Markings
1. Introduction Wagon Markings Article 4, para 4 of the Safety Directive (2004/49/EG amended by 2008/110/EC) stipulates the responsibility of each manufacturer, maintenance supplier, wagon keeper, service
TYPE APPROVAL CERTIFICATE
Page 1 / 9 File number: AP 63 Product code: 2592I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com Requirements: Bureau Veritas Rules
Datasheet PDCSY-MW-CHM. Technical Overview. Features. Product warranty and total quality commitment. General Information.
Datasheet Compact Heat Meters Technical Overview Heat energy is calculated by using a matched pair of high accuracy sensors to measure the difference between the forward and flow temperatures. The amount
12468/10 SJC/fp 1 DG I 1A
COUNCIL OF THE EUROPEAN UNION Brussels, 20 July 2010 12468/10 ENV 504 ENT 91 COVER NOTE from: European Commission date of receipt: 16 July 2010 to: General Secretariat of the Council Subject: Commission
Declaration of Performance (DoP)
No. DoP 1 1/3 1. 2. Unique identification code of the product-type SPAX Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article
English version of. Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr af 30. november 2012) Preface
English version of Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr. 1127 af 30. november 2012) Preface Please note that the English version is for informational
COMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX implementing Regulation (EU) No 595/2009 of the European Parliament and of the Council as regards the determination
COMMISSION REGULATION (EU) / of XXX
Ref. Ares(2018)1297632-08/03/2018 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX amending Directive 2007/46/EC, Commission Regulation (EC) No 692/2008 and Commission
Certification Memorandum
Certification Memorandum Certification of Vibration Health Monitoring (VHM) Systems for compliance with Commission Regulation (EU) 2016/1199 introducing Annex V (Part-SPA) of Regulation (EU) No 965/2012
Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause
1. EN71 - Part1: Mechanical and Physical Properties Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause Test method : EN71-1:
(Non-legislative acts) DECISIONS
14.5.2011 Official Journal of the European Union L 126/1 II (Non-legislative acts) DECISIONS COMMISSION DECISION of 26 April 2011 concerning a technical specification for interoperability relating to the
COMMISSION REGULATION (EU)
30.11.2010 Official Journal of the European Union L 313/3 REGULATIONS COMMISSION REGULATION (EU) No 1103/2010 of 29 November 2010 establishing, pursuant to Directive 2006/66/EC of the European Parliament
Community Specifications - an EASA Perspective. Bryan Jolly ATM Rulemaking Officer 17 March 2011
Community Specifications - an EASA Perspective Bryan Jolly ATM Rulemaking Officer 17 March 2011 Community Specifications an EASA Perspective EASA Role CS s Community Specification (CS) Certification Specification
EUnited Municipal Equipment
Municipal Equipment European Association of Municipal Equipment Manufacturers A brief guide for identification of non-compliant refuse collection vehicles Is this refuse collection vehicle compliant with
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) TO A COMPONENT TYPE- APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE
COUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561
COUNCIL OF THE EUROPEAN UNION Brussels, 11 December 2006 Interinstitutional File: 2003/ 0153(COD) 9911/3/06 REV 3 ADD 1 T 84 CODEC 561 STATEMT OF THE COUNCIL'S REASONS Subject : Common Position adopted
HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s):
![HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s):](/thumbs/91/106971122.jpg "HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s):")
HyLAW HyDrail Rail Applications Assessment Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s): Status: [V1] Dissemination level: [public] 1 Acknowledgments: The HyLAW project has
Elmdene International Ltd
1 Elmdene International Ltd Tel: +44(0)23 9269 6638 3 Keel Close, Interchange Park, Fax: +44(0)23 9266 0483 Portsmouth, Hampshire, PO3 5QD, UK Web: www.elmdene.co.uk 13.8Vdc Switch Mode Power Supply GEN3-08-y
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 16059155 001 Date of issue... : Apr.24,
Certificate: / 22 March 2013
Test report: 936/21215448/A of 11 October 2012 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 05 March 2013 B10, chapter II, No. 2.4 Approved application The tested
Heat Meter Integrator
Heat Meter Integrator Features Simply operation Integral wall and DIN-rail mounting bracket Pulsed or M-Bus output options Measures heating or cooling and heat/cooling Specification Product Codes Temperature
DECLARATION OF PERFORMANCE DoP N EN
CONSTRUCTION PRODUCTS REGULATION (EU) 305/2011 DECLARATION OF PERFORMANCE DoP N 006-01-EN 1. Unique identification code of the product type: panic device according to DIN EN 1125:2008-04 1309-CPD-0194
Implementation procedure for certification and continued airworthiness of Beriev Be-200E and Be-200ES-E
1. Scope 1.1 The general process is described in the implementation procedure for design approvals of aircraft, engine and propeller from CIS and in the implementation procedure for design approvals of
Certificate of constancy of performance
0402 - CPR SC1312-11 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the
NOTE Please read this Operating Manual carefully before first using the device and strictly adhere to the instructions!
Rev. 1.8 Operating Manual for Pressure Sensors 97PA-21x-xxx page 1 of 6 Operating Manual Pressure Sensors Article numbers: 97PA-21G-10 97PA-21G-50 97PA-21Y-5 97PA-21Y-25 97PA-21Y-160 97PA-21Y-400 NOTE
EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL
This document contains an EU proposal for a legal text on an annex on motor vehicles and equipment and parts thereof to the Trade in Goods chapter in the Trade Part of a possible modernised EU-Mexico Association
Audio Operator Interface Installation Instructions
Audio Operator Interface Installation Instructions Introduction This publication describes the installation procedure for the following: 4100-1243 Microphone 4100-1244 Remote Microphone 4100-1252 Audio
Parts Certificate. Outdoor Payment Terminal KT-OPT - including KT-Retail and KT-Account SC
SC0099-18 Outdoor Payment Terminal KT-OPT - including KT-Retail and KT-Account Issued to Knowtronic ApS Stationsvej 83, DK-4684 HOLMEGARD, Denmark In respect of (part of instrument) OPT Outdoor Payment
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 31282706.003 Date of issue... : 22 nd March,
Certificate of EC type-approval of a measuring instrument Number: UK 2489 Revision 4
(UK 2489) V(0)a United Kingdom of Great Britain and Northern Ireland Certificate of EC type-approval of a measuring instrument Number: UK 2489 Revision 4 issued by the Secretary of State for Business,
QUESTION / CLARIFICATION
QUESTION / CLARIFICATION CO-ORDINATION BETWEEN NOTIFIED BODIES INTEROPERABILITY DIRECTIVE AND SUBSEQUENT AMENDMENTS ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE UNION QC-RST-020 Issue 02 Date:
ECE/RCTE/CONF/4/Add.1/Rev.2
ECE/RCTE/CONF/4/Add.1/Rev.2 8 May 2018 Agreement Concerning the adoption of uniform conditions for periodical technical inspections of wheeled vehicles and the reciprocal recognition of such inspections
Introduction of the Digital Tachograph
European Commission Directorate-General for Energy and Transport Introduction of the Digital Tachograph Background and latest developments By Leo Huberts (EC-DG TREN) Historical overview 1992: Commission
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE Certificate No: MRA0000017 This Certificate is issued to ABB Automation Products GmbH Heidelberg, Germany for Computers and Programmable Logic Controllers
EC Type-Approval Certificate UK 2655 Revision 2
UK 2655 V(0)a EC Type-Approval Certificate UK 2655 Revision 2 Issued by: National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Non-automatic Weighing Instruments
SKN_N0106AnnexJ_R2. Annex J - Specific requirements for PVT collector Certification. 1. Introduction and definition
Annex J - Specific requirements for PVT collector Certification 1. Introduction and definition PVT collectors (named hybrid collectors in ISO 9806) generate heat and electric power at the same time. They
ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions
ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS Article 1 General Provisions 1. This Annex shall apply to motor vehicles in UNECE vehicle regulations' category M1 as well as parts and equipment regulated
EC TYPE-APPROVAL CERTIFICATE
NSAI Certification EC TYPE-APPROVAL CERTIFICATE Communication concerning the type-approval of a type of a separate technical unit with regard to Directive 70/157/EEC, as last amended by Directive 2007/34/EC.
VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014)
FEDERAL CHAMBER OF AUTOMOTIVE INDUSTRIES VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014) This code is prepared under the direction of the FCAl Board,
Confirmation: / 22 March 2013
Test report: 936/21205333/A of 06 December 2006 Addendum 936/21220762/A of 04 October 2012 Initial certification: 05 March 2013 Date of expiry: 04 March 2018 Publication: BAnz AT 05 March 2013 B10, chapter
IMPLEMENTATION OF DIGITAL TACHOGRAPH SYSTEM IN EUROPEAN UNION. Marcin Rychter. Motor Transport Institute, Poland. 1. Introduction
IMPLEMENTATION OF DIGITAL TACHOGRAPH SYSTEM IN EUROPEAN UNION Marcin Rychter Motor Transport Institute, Abstract: Tachograph belongs to On Board Recording Devices. It was initially introduced for the railroads
Subject: ACEA proposal for Euro 6 OBD and Euro 6 PN limit for gasoline direct injection engines.
Subject: for Euro 6 OBD and Euro 6 PN limit for gasoline direct injection engines. Amendments to Regulations 715/007 (1) Regulation 566/011 (3) and 69/008 (), as amended by Note: ACEA s initial comments
RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC
RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references 18 January 2019 RSB reference code: RSB-DOC-10-001 Published by the Roundtable on Sustainable Biomaterials. This publication
Maintenance, replacement, or repair of the
Thank You for your purchase of one of the finest outboards available. You have made a sound investment in boating pleasure. Your outboard has been manufactured by Mercury Marine, a world leader in marine
CEN/TC 198. EN :2005/FprA1:2010. Date: CEN/TC 198. Secretariat: DIN
CEN/TC 198 Date: 2010-05 EN 1010-5:2005/FprA1:2010 CEN/TC 198 Secretariat: DIN Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 5:
Certificate: _01 / 29 April 2014
Test report: 936/21219344/B of 01 October 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 01 April 2014 B12, chapter II, No. 2.1 Approved application The tested
COMMISSION REGULATION (EC)
L 191/26 Official Journal of the European Union 23.7.2009 COMMISSION REGULATION (EC) No 640/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard
MAPNET II Transceiver Installation Instructions
MAPNET II Transceiver Installation Instructions Introduction This publication describes the installation procedure for the following versions of the MAPNET II Transceiver card. 4120/4100-0110 MAPNET II
Installation and Programming Manual Part: Building Network Interface Card Product: 4100ES
Installation and Programming Manual Part: Building Network Interface Card 4100-6047 Product: 4100ES Cautions and Warnings READ AND SAVE THESE INSTRUCTIONS- Follow the instructions in this installation
Instruction Manual. Ex-Time 40 / 50
Instruction Manual Ex-Time 40 / 50 Contents 1. Introduction 13 2. Safety Advice 13 3. Faults and Damage 13-14 4. Safety Regulations 14 5. Ex-Data 14-15 6. Technical Data 15-16 7. Use and Application /
DIRECTIVE 2009/59/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 13 July 2009 on rear-view mirrors for wheeled agricultural or forestry tractors
30.7.2009 Official Journal of the European Union L 198/9 DIRECTIVE 2009/59/EC OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 13 July 2009 on rear-view mirrors for wheeled agricultural or forestry tractors
FUNCTIONS AND TECHNOLOGY OF DIGITAL TACHOGRAPHS SYSTEMS WITH CONTEMPORARY TELEMATIC SYSTEM IN ROAD TRANSPORT, ON BOARD INFORMATICS NET AND GPS SYSTEM
Journal of KONES Powertrain and Transport, Vol. 15, No. 4 2008 FUNCTIONS AND TECHNOLOGY OF DIGITAL TACHOGRAPHS SYSTEMS WITH CONTEMPORARY TELEMATIC SYSTEM IN ROAD TRANSPORT, ON BOARD INFORMATICS NET AND
The Batteries Regulations What You Should Know
The Batteries Regulations What You Should Know Legislation On 26 September 2006 the agreed text of Directive 2006/66/EC on Batteries and Accumulators and Waste Batteries and Accumulators was published
Council of the European Union Brussels, 18 July 2014 (OR. en)
Council of the European Union Brussels, 18 July 2014 (OR. en) 11932/14 ADD 1 TRANS 367 COVER NOTE From: European Commission date of receipt: 9 July 2014 To: General Secretariat of the Council No. Cion
COMMISSION REGULATION (EU)
10.11.2010 Official Journal of the European Union L 292/21 COMMISSION REGULATION (EU) No 1009/2010 of 9 November 2010 concerning type-approval requirements for wheel guards of certain motor vehicles and
LEVEL OF IMPLEMENTATION OF DIGITAL TACHOGRAPHS SYSTEM IN EUROPEAN UNION
Journal of KONES Powertrain and Transport, Vol. 16, No. 3 2009 LEVEL OF IMPLEMENTATION OF DIGITAL TACHOGRAPHS SYSTEM IN EUROPEAN UNION Marcin Rychter Motor Transport Institute Diagnostic and Servicing
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-3 CB DE1-9640/A2 Date of issue...
OIML CERTIFICATE OF CONFORMITY
Member State of OIML United Kingdom of Great Britain and Northern Ireland OIML CERTIFICATE OF CONFORMITY Issuing authority: Person responsible: Applicant: Manufacturer: Identification of the certified
Compact Heat Meters. Features. -A Pulsed output. -B M-Bus output. Accessories. UK Sales Tel: International Tel:
Compact Heat Meters Features Compact design Simple operation Pulsed output Measures heating or cooling Specification Product Codes Water Meter Temp. range 10 to 90 C Nominal pressure 16bar Installation
CETOP POSITION PAPER PP 07
CETOP POSITION PAPER PP 07 MACHINERY DIRECTIVE 2006/42/EC Valid since 26 th May 2010 CETOP General Secretariat Lyoner Straße 18 D-60528 Frankfurt am Main Phone: +49 69 6603 1201 Fax: +49 69 6603 2201 E-mail: