AFTERMARKET TRACTOR, SKIDSTEER & WHEEL LOADER ATTACHMENTS

Size: px
Start display at page:

Download "AFTERMARKET TRACTOR, SKIDSTEER & WHEEL LOADER ATTACHMENTS"

Transcription

1 SEQ. # Price quote for: MINNESOTA PRICING PAGES (Typed Responses Required) Attchment C AFTERMARKET TRACTOR, SKIDSTEER & WHEEL LOADER ATTACHMENTS November, 2018 Vendor Name: Alamo Group (TX) Inc. Contact Person: Steven Guhr Street Address: 1502 East Walnut P.O. Box: City, State, Zip Seguin, TX, Phone #: Toll Free #: Fax #: Address: bids@alamo-group.com dba Alamo Industrial 8.0 MANUFACTURER: Alamo Industrial 9.0 ATTACHMENT DESCRIPTION: Roadside Mowing Equipment 10.0 WARRANTY TERM (Months/Years): 0ne (1) year Parts and Labor 11.0 PERCENT DISCOUNT (%) TO BE APPLIED TO LIST: 15% 11.1 DATE AND/OR I.D. OF PRICE LIST: 3/1/ DELIVERY CHARGES: (NO FLAT RATE ALLOWED) (See Special Terms and Conditions) 12.1 DELIVERY STARTING POINT (City) See Dealer Locations on (State, Zip Code) 12.2 PRICE PER LOADED MILE: $2.50 "Authorized Distributer List" 13.0 PRICE FOR ADDITIONAL SERVICE MANUAL: $ PRICE FOR ADDITIONAL PARTS MANUAL: $ INSTALLATION SERVICES - $ PER HOUR (Shop Rate): $ Installation services may be requested on an "as needed" basis. (See Special Terms and Conditons)

2 RESPONDER'S NAME: Alamo Group (TX) Inc. dba Alamo Industrial SWIFT EVENT NUMBER: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS, T-632(5) Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will p the required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions b any State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor number and the vendor location number, i.e., COMPANY SWIFT VENDOR COMPANY NAME & LOCATION NO. STREET ADDRESS STATE Titan Machinery Highway 101 Shakopee, MN MN Titan Machinery th St. SW Fargo, ND ND Titan Machinery James Road Rogers, MN MN Titan Machinery Ingersoll Ave Crookston, MN MN Titan Machinery U.S. 59 Marshall, MN MN Titan Machinery Haines Rd Hermantown, MN MN Titan Machinery W 62nd St N Sioux Falls, SD SD Titan Machinery N 1626 Wuensch Road LaCrosse WI WI

3 provide efore location PHONE CONTACT NUMBER NAME (800) Andy Bethel (800) Andy Bethel (800) Andy Bethel (800) Andy Bethel (800) Andy Bethel (800) Andy Bethel (800) Andy Bethel (800) Andy Bethel

4 WHOLEGOODS PRICING Hydro Select Line Pricing Effective February 1,

5 Hydro Select Line Price Book Section Table of Contents Machete2 Boom Machete2 Boom- Mount Kits Machete1- Replacement Heads Only Maverick Boom- Pre-2016 Model Tractors Only Maverick Boom- Mount Kits Maverick2 Boom Maverick2 Boom- Mount Kits Rear Mount Boom Samurai Boom Samurai Boom- Mount Kits Versa Boom Versa Boom- Mount Kits Falcon Hydraulic Rotary Versa Mower Versa Mower- Mount Kits Versa Pro- Flail Mowers Rear Mount Hydro Right Hand Interstater Right Hand Interstater- Mount Kits Dual Wing Interstater Dual Wing Interstater- Mount Kits 88" Rear Interstater- Flail Mowers 96" Rear Interstater- Flail Mowers 2

6 MACHETE2 BOOM 18', 22', 25' Articulated Models STANDARD SPECIFICATIONS 4" X 4" Square Tubular Frame Features a 2 1/2" greaseable "king post" style turning arm. Main pivots points utilize 2' pins with greaseable, hardened steel bushings. Self contained hydraulic system. 20 gal Front-Mounted Reservoir/35 gal Total System Volume Motor Circuit: Piston Pump 25 gpm (43.8 hp) & 3,000 2,200 rpm. Charge Pump 8 gpm (1.4 hp) & 300 2,200 rpm. Control Circuit: Piston Pump 18 gpm (31.5 hp) & 3,000 2,200 rpm. Inner Boom Arm 6"x6"x1/4" Alloy Steel Tubing Outer Boom Arm 5"x5"x1/4" Alloy Steel Tubing 120 Horizontal Boom Swing Boom Reach: Up-18' 7", Out-18', Down-5' 1". Mount Kit, Wheel Weight, and Polycarbonate Window Included in Base Price Tractor Req: Min of 8,500 lbs and 90 eng. hp. Min 90" Wheelbase and 18" Ground Clearance HEAD SPECIFICATIONS 58" Cutting Diameter Alloy Deck Material with Double Wall Side Skirt 4-1/2"x9" Heat-Treated Alloy Spindle 205 HP Direct-Coupled Piston Motor Stacked Three-Leaf, Alloy Steel Blade Bar 5/8" x 5" Double -Edged, Tempered Steel Blades, 360 Swing Standard (1) year limited parts and labor warranty. PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Base Unit (One Choice Required) Machete2 Series- 18' Boom Kit- 4wd Tractors (Joystick Control) 7,525 47, Machete2 Series- 18' Boom Kit- 2wd Tractors (Joystick Control) 7,525 47, Machete2 Series- 22' Boom Kit- 4wd Tractors (Joystick Control) 7,825 49, Machete2 Series- 22' Boom Kit- 2wd Tractors (Joystick Control) 7,825 49, Machete2 Series- 25' Boom Kit- 4wd Tractors (Joystick Control)- Deere 6D Series Only 7,950 50,525 Tier Four (IV) Tractors Require Double Hoop Highframes To Allow 25' Models To Clear Exhaust Systems Sales Note: This Will Affect Transport Widths Machete2 Series- 25' Boom Kit- 4wd Tractors (Joystick Control) Dual-Hoop High Frame For Wider Tier IV-B Tractor Models 8,010 51,655 MOWER HEAD (One Choice Required) " Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Swivel Type- Machete2 Series 1,195 19, " Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Non-Swivel- Machete2 Series 1,105 17, " Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Swivel Type- Machete2 Series 1,050 18, " Rotary Cutting head w/ctr Hyd Door, Blade Bar, Non-Swivel- Machete2 Series 1,000 16, " Rotary Cutting Head w/ctr Hyd Door, Blade Pan, Swivel Type- Machete2 Series 1,065 17, " Rotary Cutting Head w/ctr Hyd Door, Blade Pan, Non-Swivel- Machete2 Series 1,015 15, " Flail-Axe Cutting Head w/ctr Hyd Door, Swivel Type- Machete2 Series ,273 48" Flail-Axe Cutting head w/ Ctr Hyd Door, Non-Swivel- Machete2 Series ,127 48" Flail-Axe Cutting head w/ctr Hyd Door, SHD Cuttershaft (4 oz Knives), Non-Swivel- Machete2 Series ,740 3

7 MACHETE2 BOOM 18', 22', 25' Articulated Models PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE MOWER HEAD (One Choice Required) 52" Battle Axe Cutting Head, No Head Swivel (Piston Type)- Maverick1-2 Series 1,255 18,815 50" (SRD50) HD Forestry Cutting Head, No Hyd Ctr Door, Non-Swivel- Machete2/Maverick2 Series 1,050 21,525 60" HD Grass Flail Cutting Head, No Ctr Door, Swivel Type- Machete2 Series 0 19,072 60" HD Grass Flail Cutting Head, No Ctr Door, Swivel Type- Machete2 Series 0 19,072 60" HD Grass Flail Cutting Head, No Ctr Door, Non-Swivel- Machete2 Series , ' Timber Cat Sickle Bar Cutting Head, Non-Swivel- Machete2 Series , ' Timber Cat Sickle Bar Cutting Head, Non-Swivel- Machete2 Series , " Buzzbar (4 Blade) Cutting Head, Non-Swivel - Machete2 Series , " Buzzbar (3 Blade) Cutting Head, Non-Swivel - Machete2 Series , " (SRD50) HD Forestry Cutting Head, No Hyd Ctr Door, Non-Swivel- Machete2/Maverick2 Series 1,050 21, " Buzzbar (2 Blade) Cutting Head, Non-Swivel - Machete2 Series ,990 Ditcher Head, Ctr Hyd Chute, Hitch-Post Mounted, Piston-Type Machete2/Maverick2 Series ,060 OPTIONS A Additional Operators and Parts Manuals- Machete2 Series Booms Quick Hitch Base Kit- Components For End Of Boom and Components For 1 Head- Machete2 Boom Series 212 4, Quick Hitch Hydraulic Kit- Hydraulic Components For 1 Head- Machete2 Boom Series Flail Cutting Head Storage Stand- 48" Flail Axe- All Boom Series Flail Cutting Head Storage Stand- 60" HD Grass Flail (B)- All Boom Series Mounting Charges- Machete & Maverick Booms (Labor & Oil) 7, Special Mower Paint- All High Frame/Versa Series Booms 1, Special Tractor Paint- Cab 4wd Tractors 6, MC Additional 12 Month Warranty- Machete Series Booms 4,666 * Includes all components to convert boom and (1) head to Quick Hitch ** Required to convert additional heads to Quick Hitch *** Required to level Flail Heads for Quick Hitch 4

8 MACHETE2 BOOM 18', 22' 25' Mount Kit Options Sales Note: 25" Machete units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear Case IH Case Farmall 110A/120A TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-25' Models. Designed for tractors with flanged rear axles N/A Case Farmall 130A/140A TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-25' Models. Designed for tractors with flanged rear axles N/A Case Farmall 105/115U TIV-A Cab 4wd Series (2014-Early 2016 Only)- Sales Note: 18-22' Models Only N/A 13.6R R38 Case Farmall 105/115U TIV-A Cab 4wd Series (2016- Current Only)- Sales Note: 18-22' Models Only N/A 13.6R R38 Case-IH Maxxum 115/125/135/145 TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-25' Models. Designed for tractors with flanged rear axles N/A Case-IH Maxxum 115/125/135/145 TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-25' Models. Designed for tractors with flanged rear axles N/A Case-IH Maxxum 110/110 Pro/120 Pro/130 Pro TIII Cab 4wd ( ) ' Models N/A Case-IH Maxxum 115/125/125 Pro/140 Pro TIII Cab 2wd ( ) ' Models Only Sales Note: Part # axle-stabilizer cylinder kit included N/A Case-IH Maxxum 115/125/125 Pro/140 Pro TIII Cab 4wd ( ) ' Models N/A Case-IH Puma 130/145/160 TIV-A Cab 4wd CVT/Pwr Shift Models (2014- Current) Sales Note: 18-25' Models N/A Case-IH Puma 165/180/195/210 Cab/4wd (Frt Axle Stabilizer Not Incl.) N/A 16.9R R42 Challenger Challenger MT445B/455B/465B TIII Cab 4wd (MY ) ' Models N/A Challenger MT455/465/475/485/495D TIV-A Cab 4wd (MY ) 18-25' Models N/A Challenger MT475B TIII Cab 4wd (MY ) ' Models N/A

9 MACHETE2 BOOM 18', 22' 25' Mount Kit Options Sales Note: 25" Machete units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear John Deere JD 5085/5100/5115M TIV-B Cab 4wd Series (2015-Current) Sales Note: 18-22' Models Only. Designed for tractors with flanged rear axles. Call For Availability N/A JD 5085/5100/5115E TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-22' Models Only. Designed for tractors with flanged rear axles. Call For Availability N/A John Deere 6105/6120E TIV-B Cab 4WD Series (2015- Current) Sales Note: 18-22' Models. Designed for tractors with flanged rear axles N/A John Deere 6105/6120E TIV-B Cab 4wd Series (2015- Current) Sales Note: 25' Models. Designed for tractors with flanged rear axles. Call For Availability N/A John Deere 6105/6115D Series I-TIV Cab 4WD ( ) ' Models N/A John Deere 6110/6120/6130M TIV-B Cab 4wd Series (2015- Current)- Sales Note: 18-22' Models. Designed for tractors with flanged rear axles N/A John Deere 6110/6120/6130M TIV-B Cab 4wd Series (2015- Current) Sales Note: 25' Model. Designed for tractors with flanged rear axles N/A JD 6105/6115/6125M Series I-TIV Cab 4WD (MY ) N/A John Deere 6145/6155M TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-22' Models. Designed for tractors with flanged rear axles. Sales Note: Not compatible with 6155M Tractors with Rear Axle Build Code # 5041 Call For Availability N/A John Deere 6145/6155M TIV-B Cab 4wd Series (2015- Current) Sales Note: 25' Model. Designed for tractors with flanged rear axles. Sales Note: Not compatible with 6155M Tractors with Rear Axle Build Code # N/A JD 6140/6150R Cab 4wd (Tier IV-A Model Engines) Tractors equipped with Bar Axle & Cast Rims N/A JD 6170/6190/6210R Cab 4wd (Tier IV-A Model Engines) Tractors equipped with Bar Axle & Cast Rims N/A

10 MACHETE2 BOOM 18', 22' 25' Mount Kit Options Sales Note: 25" Machete units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear John Deere JD 6215/6415 TIII Cab 2wd N/A JD 6220/6320/6420 Tier II Cab 2wd (MY ) N/A JD 6230/6330/6430 TIII "Mid-Spec" Cab 2wd (MY ) N/A JD 6230/6330/6430 TIII "Mid-Spec" Cab 4wd (MY ) N/A JD 6230/6330/6430 TIII "Premium" Cab 4wd (MY ) N/A JD 7130/7230 TIII "Mid-Spec" Cab 2wd (Frt Axle Stabilizer Not Incl.) (MY ) JD 7130/7230 TIII "Mid-Spec" Cab 4wd (MY ) N/A JD 7130/7230 TIII "Prem" Cab 4wd (6 cyld / 55 gal. fuel tank / Flanged Rear Whl / Built Before Nov. 1, 2010) (MY ) N/A JD 7130/7230/7330 TIII "Prem" Cab 4wd (4 & 6 cyl / 66 gal. fuel tank / Rack & Pinion Rear Whl / Built After Nov. 1, 2010) (MY ) Massey Ferguson MF 5465/5475 (Tier III- Perkins Engine Only) Cab 4wd (MY ) N/A Massey Ferguson 6614/6615/6617 I-TIV Cab 4wd (2014- Current) Sales Note: 18-25' Models. Designed for tractors with flanged rear axles N/A McCormick McCormick MC105 Cab/4wd N/A New Holland New Holland T6.145/6.155/6.165/6.175 TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-22' Models. Designed for tractors with flanged rear axles N/A New Holland T6.145/6.155/6.165/6.175 TIV-B Cab 4wd Series (2015- Current) Sales Note: 25' Model. Designed for tractors with flanged rear axles N/A New Holland TS6.110/6.120 TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-25' Models. Designed for tractors with flanged rear axles N/A New Holland TS6.110/6.120 TIV-B Cab 2wd Series (2015- Current) 18-22' Models Only. Designed for tractors with flanged rear axles. Sales Note: This mount will include an axle stabilizer cylinder N/A New Holland TS6.110/6.120 TIV-B Rops 2wd Series (2015- Current) 18-22' Models Only. Designed for tractors with flanged rear axles. Sales Note: This mount will include an axle stabilizer cylinder N/A New Holland TS6.130/6.140 TIV-B Cab 4wd Series (2015- Current) Sales Note: 18-25' Models. Designed for tractors with flanged rear axles N/A

11 MACHETE2 BOOM 18', 22' 25' Mount Kit Options F.O.B. Seguin, TX Sales Note: 25" Machete units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear New Holland NH TS6.110/6.120 TIII Cab 4wd- 4 Cyl. Engines ( ) N/A NH TS6.110/6.120 TIII Cab 2wd-4 Cyl. Engines ( ) N/A NH TS6.125/6.140 TIII Cab 4wd- 6 Cyl. Engines ( ) N/A NH T6.140/6.150/6.160 TIV-A Cab 4wd- 6 Cyl. Engines (2013-Early 2015) N/A NH T6.155/6.165/6.175 TIV-A Cab 4wd- 6 Cyl. Engines (2013-Early 2015) N/A NH T6020/6040/6060 TIII Cab 4wd ( ) (Serial #'s Built After May 2010) N/A NH T6030/6050/6070/6080 TII Cab 2wd ( ) (Serial #'s Built Before May 2010) N/A NH T6030/6050/6070/6080 Cab 2wd ( ) (Serial #'s Built After May 2010) N/A NH T6030/6050/6070/6080 TII Cab 4wd ( ) (Serial #'s Built Before May 2010) N/A NH T6030/6050/6070/6080 TIII Cab 4wd ( ) (Serial #'s Built After May 2010) N/A NH T6030/6050/6070/6080 TIII Cab 4wd ( ) (Serial #'s Built After May 2010) N/A New Holland T5.105/115U TIV-A Cab 4wd Series (2014-Early 2016 Only)- Sales Note: 18-22' Models Only. Designed for tractors with flanged rear axles N/A Sales Notes: (1) Always use the maximum tire size noted for most favorable ground clearance. (2) Kits are designed for tractors equipped with flange-type rear axles. (3) 2wd models should only be sold with shortest boom configuration available Perceived stability will be compromised because of the lack of a front stabilizer cylinder. 8

12 MACHETE BOOM- FIRST SERIES REPLACEMENT HEADS PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT AVAILABLE REPLACEMENT MOWER HEADS LIST PRICE 60" Rotary Cuttting Head w/ Ctr Hyd Door, Blade Bar- Machete1 Series ,778 48" Flail-Axe Cutting Head w/ Ctr Hyd Door, Non-Swivel- Machete1 Series ,127 60" HD Grass Flail (B) Cutting Head, No Hyd Door, Non-Swivel, Piston Type- Machete1 series ,925 5' Timber Cat Sickle Bar Cutting Head- Non-Swivel- Machete1 Series ,823 7' Timber Cat Sickle Bar Cutting Head- Non-Swivel- Machete1 Series ,513 Ditcher Head, Ctr Hyd Chute, Hitch-Post Mounted, Piston-Type- Machete1 Series ,060 90" Buzzbar (4 Blade) Cutting Head, Non-Swivel- Machete1 Series 1,098 19,270 69" Buzzbar (3 Blade) Cutting Head, Non-Swivel- Machete1 Series ,200 48" Buzzbar (2 Blade) Cutting Head, Non-Swivel- Machete1 Series ,989 9

13 MAVERICK BOOM 24', 30' Articulated Models STANDARD SPECIFICATIONS HEAD SPECIFICATIONS Bolt-On Undermount with Front and Rear Attached Rails 58" Cutting Diameter Boom Features Dipper, Lift, and Telescopic Sections w/ Axle-Mounted Boom Rest Alloy Deck Material with Double Wall Side Skirt Standard Boom Structure Made from Alloy Steel, Designed Box Section 4-1/2"x9" Heat-Treated Alloy Spindle Main Pivot Features 2' Chrome Pins with Greaseable, Hardened Steel Bushings 199 HP Motor Direct-Coupled Hydraulic Pivot is Featured on Head for Maneuverability. 2-1/2" x 5" Stacked Three-Leaf Blade Bar, T1 Steel Front Axle Mounted Cylinder for Automatic Self-stabilization of Unit 5/8" x 5" Double -Edged, Tempered Self Contained Front Mounted Hydraulic System Steel Blades, 360 Swing Self-Cleaning, Thermostatically Controlled Oil-to-Air Cooler Standard (1) year limited parts and Ability to Mow Horizontally Within 6" of Rear Tire labor warranty. Boom Reach: 24' Models= Up-21'10", Out-24', Down-14'8" 30' Models= Up-27'10", Out-30', Down-19'3" Exclusive Slewing Ring Bearing is Utilyzed for Boom Maneuverability and 180 Horizontal Boom Swing Joystick, Mount Kit, All Wheel Weight, Polycarbonate Window Included in Base Price Tractor Req: Min of 8,500 lbs and 90 HP. Min 90" Wheelbase and 18" Ground Clearance PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Maverick Base Unit (One Choice Required) Maverick1 Series- 24' Telescoping Boom (Joystick Control) 6,000 61, Maverick1 Series- 24' Non-Telescoping Boom (Joystick Control) 6,000 55,474 Sales Note: This Non-Telescoping option above mechanically locks the sliding dipper section in the retracted position p g resulting ( y in a maximum ) 22' Boom Reach piece Undermount System 10,480 69,181 All Tier Four (IV) Tractors will Require Wider Undermounts To Clear The Larger Exhaust Systems. Sales Note: This will Affect Transport Widths Maverick2 Series- 24' Telescoping Boom Kit (Joystick Control) Large One Piece Undermount System (TIV-B Case/NH Models) 9,630 62, Maverick2 Series- 28' Non-Telescoping Boom (Joystick Control) Large One Piece Undermount System (TIV-B Case/NH Models) 10,565 68,664 Sales Note: This Non-Telescoping option above mechanically locks the sliding dipper section in the retracted position resulting in a maximum 22' Boom Reach Maverick2 Series- 30' Telescoping Boom (Joystick Control) Large One Piece Undermount System (TIV-B Case/NH Models) 10,680 70,278 Mower Heads (One Choice Required) " Rotary Cutting Head w/ Ctr Hyd Door, Blade Bar, Swivel Type- Maverick1 Series , " Rotary Cutting Head w/ Ctr Hyd Door, Blade Bar, Non-Swivel- Maverick1 Series 0 17, " Rotary Cutting Head w/ Ctr Hyd Door, Blade Bar, Swivel Type- Maverick1 Series 0 18, " Rotary Cutting Head w/ Ctr Hyd Door, 3-Blade Pan, Swivel Type- Maverick1 Series 0 17, " Flail-Axe Cutting Head w/ Ctr Hyd Door, Non-Swivel- Maverick1 Series ,127 48" Flail-Axe Cutting Head w/ Hyd Cntr Door, Swivel Type- Maverick1 Series ,273 48" Flail-Axe Cutting Head w/ Ctr Hyd Door, Non-Swivel, SHD Cuttershaft (3 oz Knives)- Maverick1 Series ,740 5' Timber Cat Sickle Bar Cutting Head, Non-Swivel- Maverick1 Series ,823 10

14 MAVERICK BOOM 24', 30' Articulated Models PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Mower Heads (One Choice Required) 7' Timber Cat Sickle Bar Cutting Head, Non-Swivel- Maverick1 Series ,513 48" Buzzbar (2 Blade) Cutting Head, Non-Swivel- Maverick1 Series ,988 69" Buzzbar (3 Blade) Cutting Head, Non-Swivel- Maverick1 Series ,200 90" Buzzbar (4 Blade) Cutting Head, Non-Swivel- Maverick1 Series 1,098 19,365 Ditcher Head, Ctr Hyd Chute, Hitch-Post Mounted, Piston-Type- Machete1 Series ,060 Options Quick Hitch Base Kit- Components For End Of Boom and Components For 1 Head- Machete2 Boom Series 212 4, Quick Hitch Hydraulic Kit- Hydraulic Components For 1 Head- Machete2 Boom Series Ditcher Head Storage Stand- All Boom Series Flail Cutting Head Storage Stand- 60" HD Grass Flail (B)- All Boom Series Mounting Charges- Machete & Maverick Booms (Labor & Oil) 7, MV Special Mower Paint ( )- All Maverick Series Booms 1, MV Additional 12 Month Warranty- Maverick Series Booms 4,666 * Includes all components to convert boom and (1) head to Quick Hitch ** Required to convert additional heads to Quick Hitch *** Required to level heads for Quick Hitch 11

15 MAVERICK BOOM 24' Mount Kit Options TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE FRONT REAR Case IH Case-IH Farmall 125/140A Cab/4wd (Tier III Engine Only)- 24' Mount Kit Case-IH MXU100/110 Cab/4wd (24' Models Only) Case-IH MXU115/125/130/135 Cab/4wd Case-IH Maxxum 110/110 Pro/120 Pro/130 Pro (24' Models Only) Case-IH Maxxum 115/125/125 Pro/140 Pro Challenger Challenger MT455/465/475/485/795D ( 4 cyl.) TIV-B Cab 4wd (2015- current) Challenger MT445B/455B/465B Cab/4wd (Tier III Engine Only) John Deere JD 6105/6115/6125M Interim TIV Models Cab 4wd JD 6140/6150M Cab 4wd (Interim TIV Engines Only) ( ) JD 6215/6415 Cab/4wd JD 6220/6320/6420 (Tier II) Cab/4wd JD 6230/6330/6430 "Mid Spec" Cab/4wd JD 6230/6330/6430 Premium Cab/4wd w/ Panoramic Door JD 6615/6715 Cab/4wd JD 7210/7410/7510 Cab/4wd JD 7220/7320 Cab/4wd (34" Flanged Rear Whl) JD 7220/7320 Cab/4wd (38" Flanged Rear Whl) JD 7220/7320 Cab/4wd (38" Rack & Pinion Whl) JD 7130/7230 "Mid" Cab/4wd (4 or 6 cyld / 55 gal. fuel tank) JD 7130/7230 "Prem" Cab/4wd (6 cyld / 55 gal. fuel tank / Flanged Rear Whl / Built Before Nov. 1, 2010) JD 7130/7230 "Prem" Cab/4wd (6 cyld / 55 gal. fuel tank / Rack & Pinion Rear Whl / Built Before Nov. 1, 2010) JD 7130/7230 "Prem" Cab/4wd (6 cyld IVT / 55 gal. fuel tank / Flanged Rear Whl / Built Before Nov. 1, 2010) Massey Ferguson MF 5460 Cab/4wd (Tier II Engine Only) MF 5465 Cab/4wd (Tier II Engine Only) MF 5465/5475 Cab/4wd (Tier III Perkins Engine Only) MF 5465/5475 Cab/4wd (Tier III Sisu Engine Only) MF 6614/6615/6615 Cab 4wd (4 Cyl) TIV-B (2015-) MF 7614/7615/7616/7618 Cab 4wd (2014-) Tier IV-A (6 Cyl Engines Only) New Holland NH TS100A/110A Cab/4wd (24' Models Only) NH TS115A/125A/130A/135A Cab/4wd NH T6010/6020/6040/6060 Cab/4wd (Built Before May 2010) NH T6010/6020/6040/6060 Cab/4wd (Built After May 2010) NH T6030/6050/6070 Cab/4wd (Built Before May 2010) NH T6030/6050/6070 Cab/4wd (Built After May 2010) OTHER SPECIFICATIONS (1) Always use the maximum tire size for favorable ground clearance. (2) Mount kits are designed for use with 4wd tractors only. (3) Tractors should not be ordered with armrest-integrated controls. (4) Tractors must be equipped with flanged rear rims unless otherwise noted. 12

16 MAVERICK BOOM 30' Mount Kit Options Note: 30' Maverick units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE FRONT REAR Case IH Case-IH Farmall 125/140A Cab/4wd (Tier III Engine Only)- 30' Mount Kit Case-IH MXU115/125/130/135 Cab/4wd Case-IH Maxxum 115/125/125 Pro/140 Pro Challenger Challenger MT455/465/475/485/795D ( 4 cyl.) TIV-B Cab 4wd (2015- current) Challenger MT445/455/465B Cab/4wd (4 Cyl.-TIII Engine) Challenger MT475B Cab/4wd (Tier III) John Deere JD 6105/6115/6125M Interim TIV Models Cab 4wd JD 6140/6150M Cab 4wd (Interim TIV Engines Only) ' Mount Kit JD 6615/6715 Cab/4wd JD 7210/7410/7510 Cab/4wd (34" Flanged Rear Rim) JD 7220/7320 Cab/4wd (34" Flanged Rear Whl) JD 7220/7320 Cab/4wd (38" Flanged Rear Whl) JD 7220/7320 Cab/4wd (38" Rack & Pinion Whl) JD 7130 "Mid" Cab/4wd (4 cyld / 55 gal. fuel tank) JD 7130/7230 "Mid" Cab/4wd (6 cyld / 55 gal. fuel tank) JD 7130/7230 Premium Cab/4wd w Panoramic Door (55 Gal Tank Only) JD 7130/7230 "Prem" Cab/4wd (6 cyld / 55 gal. fuel tank / Flanged Rear Whl / Built Before Nov. 1, 2010) Massey Ferguson MF 5465 Cab/4wd (Tier II Engine Only) MF 5465/5475 Cab/4wd (Tier III Perkins Engine Only) MF 5465/5475 Cab/4wd (Tier III Sisu Engine Only) MF 7614/7615/7616/7618 Cab 4wd 2014 (Tier IV-A, 6 Cyl Engines Only) New Holland NH TS115A/125A/130A/135A Cab/4wd NH T6030/6050/6070 Cab/4wd (Built Before May 2010) NH T6030/6050/6070 Cab/4wd w/ Command Armrest (Built before May 2010) NH T6030/6050/6070 Cab/4wd (Built After May 2010) NH T6030/6050/6070 Cab/4wd w/ Command Armrest (Built after May 2010) OTHER SPECIFICATIONS (1) Always use the maximum tire size for favorable ground clearance. (2) Mount kits are designed for use with 4wd tractors only. (3) Tractors should not be ordered with armrest-integrated controls. (4) Tractors must be equipped with flanged rear rims unless otherwise noted. 13

17 MAVERICK2 BOOM 24', 28', & 30' Articulated Models STANDARD SPECIFICATIONS HEAD SPECIFICATIONS Bolt-On Undermount- Support Rails Tie Into to the Rear Axle and Front Bolster Support 58" Cutting Diameter Boom Features Dipper, Lift, and Telescopic Sections w/ Axle-Mounted Boom Rest Alloy Deck Material with Double Wall Side Skirt Standard Boom Structure Made from Alloy Steel, Designed Box Section 4-1/2"x9" Heat-Treated Alloy Spindle Main Pivot Features 2' Chrome Pins with Greaseable, Hardened Steel Bushings 199 HP Motor Direct-Coupled Hydraulic Pivot is Featured on Head for Maneuverability. 2-1/2" x 5" Stacked Three-Leaf Blade Bar, T1 Steel Front Axle Mounted Cylinder for Automatic Self-stabilization of Unit 5/8" x 5" Double -Edged, Tempered Self Contained Front Mounted Hydraulic System Steel Blades, 360 Swing Self-Cleaning, Thermostatically Controlled Oil-to-Air Cooler Standard (1) year limited parts and Boom Reach (Telescopic Models Only): 24' Models= Up-21'10", Out-24', Down-14'8" labor warranty. 30' Models= Up-27'10", Out-30', Down-19'3" Both 24' & 30' Models available as "fixed dipper" builds that will thake 2' off of the advertised boom reach measurements above Exclusive Slewing Ring Bearing is Utilyzed for Boom Maneuverability and 180 Horizontal Boom Swing Joystick, Mount Kit, All Wheel Weight, Polycarbonate Window Included in Base Price Tractor Req: Min of 10,500 lbs and 90 PTO HP. Min 90" Wheelbase and 18" Ground Clearance PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Maverick Base Unit (One Choice Required) Maverick2 Series- 24' Telescoping Boom Kit (Joystick Control)- Standard two-piece Undermount System 9,430 61, Maverick2 Series- 28' Non-Telescoping Boom (Joystick Control)- Standard two-piece Undermount System 10,365 67,566 Part # features a fixed dipper section allowing the boom to reach to a 28' maximum Maverick2 Series- 30' Telescoping Boom (Joystick Control)- Standard twopiece Undermount System 10,480 69,181 Many Tier IV Final (TIV-B) Tractors Require Wider Undermounts Below To Clear The Larger Exhaust Systems. Sales Note: Required For NH TS6.xxx, T6.xxx and Case Farmall A, Maxxum Equivalents. This will Affect Transport Widths Maverick2 Series- 24' Telescoping Boom Kit (Joystick Control) Large One Piece Undermount System (TIV-B Case/NH Models) 9,630 62, Maverick2 Series- 28' Non-Telescoping Boom (Joystick Control) Large One Piece Undermount System (TIV-B Case/NH Models) 10,565 68,664 Part # features a fixed dipper section allowing the boom to reach to a 28' maximum Maverick2 Series- 30' Telescoping Boom (Joystick Control) Large One Piece Undermount System (TIV-B Case/NH Models) 10,680 70,278 14

18 MAVERICK2 BOOM 24', 28', & 30' Articulated Models PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Mower Heads (One Choice Required) 50" Rotary Cutting Head w/ Ctr Hyd Door, Blade Bar, Swivel Type- Maverick2 Series ,952 50" Rotary Cutting Head w/ Ctr Hyd Door, 3-Blade Pan, Swivel-Type- Maverick2 Series ,986 60" Rotary Cutting Head w/ Ctr Hyd Door, Blade Bar, Swivel Type- Maverick2 Series 1,195 19,923 60" Rotary Cutting Head w/ Ctr Hyd Door, Blade Bar, Non-Swivel- Maverick2 Series ,778 48" Buzzbar (2 Blade) Cutting Head, Non-Swivel - Machete2 Series ,990 69" Buzzbar (3 Blade) Cutting Head, Non-Swivel - Machete2 Series ,200 90" Buzzbar (4 Blade) Cutting Head, Non-Swivel - Machete2 Series ,153 48" Flail-Axe Cutting head w/ Ctr Hyd Door, Non-Swivel- Machete2 Series ,127 48" Flail-Axe Cutting Head w/ctr Hyd Door, Swivel Type- Machete2 Series ,273 48" Flail-Axe Cutting head w/ctr Hyd Door, SHD Cuttershaft (4 oz Knives), Non-Swivel- Machete2 Series ,740 52" Battle Axe Cutting Head, No Head Swivel, De Thatching Knives (Piston Type)- Maverick1-2 Series 1,255 18,815 52" Battle Axe Cutting Head, No Head Swivel (Piston Type)- Maverick1-2 Series 1,255 18,815 52" Battle Axe Cutting Head, No Head Swivel (Piston Type)- Maverick1-2 Series ( Pierce County Build) 1,150 18,815 60" HD Grass Flail Cutting Head, No Ctr Door, Swivel Type- Machete2 Series 0 19,072 60" HD Grass Flail Cutting Head, No Ctr Door, Non-Swivel- Machete2 Series ,927 60" HD Grass Flail Cutting Head- Bolt On Hydraulic Door Kit- Replaces Front Factory Foot Guard 0 2,422 50" (SRD50) HD Forestry Cutting Head, No Hyd Ctr Door, Non-Swivel- Machete2/Maverick2 Series 1,050 21,525 50" (SRD50) HD Forestry Cutting Head- Hitch Post Kit (Required)- Machete2/Maverick2 Series 165 1,050 Ditcher Head, Ctr Hyd Chute, Hitch-Post Mounted, Piston-Type- Machete2/Maverick2 Series ,060 15

19 MAVERICK2 BOOM 24', 28', & 30' Articulated Models PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Quick Hitch Base Kit- Components For End Of Boom and Components For 1 Head- Maverick2 Boom Series 385 3, Quick Hitch Hydraulic Kit- Hydraulic Components For A Rotary Cutting Head- Swivel Type- Maverick2 Boom Series 0 1, Quick Hitch Hydraulic Kit- Hydraulic Components For A BuzzBar Cutting Head- Maverick2 Boom Series 0 1, Quick Hitch Hydraulic Kit- Hydraulic Components For A Flail Axe Cutting Head- Swivel Type- Maverick2 Boom Series 0 1, Quick Hitch Hydraulic Kit- Hydraulic Components For A Ditcher Head- Maverick2 Boom Series 0 1, Quick Hitch Hydraulic Kit- Hydraulic Components For A HD Grass Flail Cutting Head- Swivel Type- Maverick2 Boom Series 0 1, Ditcher Head Storage Stand- All Boom Series Options Flail Cutting Head Storage Stand- 48" Flail Axe- All Boom Series Flail Cutting Head Storage Stand- 60" HD Grass Flail (B)- All Boom Series A Additional Operators and Parts Manuals- Maverick1 Series Booms Mounting Charges- Machete & Maverick Booms (Labor & Oil) 7, MV Special Mower Paint ( )- All Maverick Series Booms 1, MV Additional 12 Month Warranty- Maverick Series Booms 4,666 16

20 MAVERICK2 BOOM Mount Kit Options TRACTOR DESCRIPTION Case IH Case Farmall 110/120A TIV-B Cab 4wd Series ( Current) Sales Note: 24' Mount Kit The 30' model will not be available on this tractor series due to front axle positioning. Use the Farmall 130A or larger Series to mount 30' models. TBD Case Farmall 130/140A Tier IV-B Cab 4wd Series ( Current) Sales Note: 24' Mount Kit Case Farmall 130/140A Tier IV-B Cab 4wd Series ( Current) Sales Note: 28' Mount Kit Case Farmall 130/140A Tier IV-B Cab 4wd Series ( Current) Sales Note: 30' Mount Kit Case Maxxum 115/125/135/145 TIV-B Cab 4wd Series (2015- Current)- 24' Mount Kit Sales Note: Tractor must be equipped with a standard MFWD Front Axle (Code ) Case Maxxum 115/125/135/145 TIV-B Cab 4wd Series (2015- Current)- 30' Mount Kit Sales Note: Tractor must be equipped with a standard MFWD Front Axle (Code ) John Deere John Deere 6105/6115/6125M I-TIV Cab 4wd ( ) Sales Note: 24' Mount Kit John Deere 6105/6115/6125M I-TIV Cab 4wd ( ) Sales Note: 30' Mount Kit John Deere 6110/6120/6130M TIV-B Cab 4wd Series (MY2015- Current) 24' Mount Kit Sales Note: The 30' Mount Kit Will Not be Available on this Tractor Series Because of Factory Exhaust SCR Positioning. Use the 6145M or larger Series to mount 30' models John Deere 6145/6155M TIV-B Cab 4wd (2015- Current) Sales Note: 24' Mount Kit This kit will not work with 6155 tractors equipped with rear axle code # John Deere 6145/6155M TIV-B Cab 4wd (2015- Current) Sales Note: 30' Mount Kit This kit will not work with 6155 tractors equipped with rear axle code # New Holland New Holland TS6.110/120A Cab 4wd Tier IV-B (2015- Current)- 24' Mount Kit Sales Note: The 30' Mount Kit Will Not be Available on this Tractor Series Because of Front Axle Positioning. Use the TS6.130 or larger Series to mount 30' models. MOUNT KIT MAXIMUM TIRE SIZE FRONT REAR TBD- Call For Availability New Holland TS6.130/6.140 Tier IV-B Cab 4wd Series ( Current) Sales Note: 24' Mount Kit New Holland TS6.130/6.140 Tier IV-B Cab 4wd Series ( Current) Sales Note: 28' Mount Kit New Holland TS6.130/6.140 Tier IV-B Cab 4wd Series ( Current) Sales Note: 30' Mount Kit T6.145/155/165/175 Cab4wd (4 cyl) Tier IV-B (2015-) - 24' Mount Kit Sales Note: Tractor must be equipped with a standard MFWD Front Axle (Code ) T6.145/155/165/175 Cab4wd (4 cyl) Tier IV-B (2015-) - 30' Mount Kit Sales Note: Tractor must be equipped with a standard MFWD Front Axle (Code ) OTHER SPECIFICATIONS (1) Always use the maximum tire size for maximum ground clearance. (2) Mount kits are designed for use with 4wd tractors only. (3) Tractors should not be ordered with armrest-integrated controls. (4) Tractors must be equipped with flanged rear rims unless otherwise noted. (5) The right handrail must be removed for boom transport clearance. 17

21 REAR MOUNT BOOM 17', 20', 23' Articulated Models STANDARD SPECIFICATIONS HEAD SPECIFICATIONS Welded Steel Plate Frame Mounted to the Rear Axle and Three-Point Hitch 60" Boom-Axe Head 60-Gallon Hydraulic Reservoir with 12 Micron Filtration 10-Gauge Top Deck with 1/4" Side Skirts 4" King Post with 3" Tapered Roller Bearings Full Length Replaceable Skid Shoes Inner Boom Arm 6"x 6" x 1/4" Steel Tubing 4-1/2"x 9" Heat-Treated Alloy Spindle Outer Boom Arm 5"x 5" x 1/4" Steel Tubing 101 HP Motor Direct-Coupled 120 Horizontal Boom Swing 5/8" x 5" Double -Edged, Tempered Boom Reaches: Steel Blades, 360 Swing 17: Up-19'6", Out- 18'9", Down- 8'9" Standard (1) year limited parts and labor warranty. labor warranty. 23: Up-22'10", Out- 22'4", Down- 15'6" Stacked Hydraulic PSI 4-Spool, Open Center, Tapered Positive Metering Valve Safety Cage (ROPS Units ONLY) Tractor Req: Min. 5,000 lbs. with 65 HP rating Mount Kit & Polycarbonate Window Included in Base Price Front End Weight to be Supplied by the End User. PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE REAR MOUNT BASE UNIT (One Choice Required) Rear-Mount Series- 17' Boom Kit (Cable Control) 6,000 35, E Rear-Mount Series- 17' Boom Kit (Electronic Joystick Control) 6,000 43, Rear-Mount Series- 20' Boom Kit (Cable Control) 6,100 37, E Rear-Mount Series- 20' Boom Kit (Electronic Joystick Control) 6,100 45, Rear-Mount Series- 23' Boom Kit (Cable Control) 6,200 39, E Rear-Mount Series- 23' Boom Kit (Electronic Joystick Control) 6,200 47, MOWER HEAD (One Choice Required) 60" Rotary Cutting head w/mech Cnter Door, Blade Bar, Non- Swivel- Versa/Rear-Mount Boom Series ,570 50" Rotary Cutting Head w/mech Cnter Door, Blade Pan, Non- Swivel- Versa/Rear-Mount Boom Series ,891 50" Rotary Cutting Head w/mech Cnter Door, Blade Bar, Non- Swivel- Versa/Rear-Mount Boom Series ,273 48" Flail Axe Cutting Head w/ Fixed Ctr Door, Non-Swivel- Versa/Rear-Mount Boom Series ,717 60" SHD Flail Cutting Head, Non-Swivel- Versa/Rear-Mount Boom Series ,650 90" Buzzbar (4 Blade) Cutting Head, Non-Swivel- Versa/Rear-Mount Boom Series 1,098 19,365 69" Buzzbar (3 Blade) Cutting Head, Non-Swivel- Versa/Rear-Mount Boom Series ,280 48" Buzzbar (2 Blade) Cutting Head, Non-Swivel- Versa/Rear-Mount Boom Series ,052 5' Timber Cat Sickle Bar Cutting Head, Non-Swivel- Versa/Rear-Mount Boom Series ,329 7' Timber Cat Sickle Bar Cutting Head, Non-Swivel- Versa/Rear-Mount Boom Series ,741 18

22 REAR MOUNT BOOM 17', 20', 23' Articulated Models PRODUCT ORDER CODE DESCRIPTION OPTIONS APPRX. WEIGHT LIST PRICE Additional Operators and Parts Manuals- Rear Mount Series Booms 0 62 Quick Hitch Base Kit- Components For End Of Boom and Components For 1 Head- Versa/Rear Mount Boom Series 0 3,099 Quick Hitch Hydraulic Kit- Hydraulic Components For 1 Head- Versa/Rear Mount Boom Series Universal Wheel Weight Kit- 500 lbs. Cast Kit- All Mower Series 500 1, Universal Wheel Weight Kit lbs. Cast Kit- All Boom Series 1,300 3, Additional 408 lb. Kit (3-136 lb, 25" Dia (Small), 1" Thick Plates and Hardware) for use with 1300 lb. Wheel Weight- All Boom Series 408 1,874 Additional 680 lb. Kit (5-136 lb, 25" Dia (Small), 1" Thick Plates and Hardware) for use with 1300 lb. Wheel Weight- All Boom Series 680 2, Mounting Charges- Versa & RM Booms (Labor & Oil) 8, Special Mower Paint- All High Frame/Versa Series Booms 1, Special Tractor Paint- Cab 4wd Tractors 6, RW Additional 12 Month Warranty- Rear Mount Series 4,622 * Includes all components to convert boom and (1) head to Quick Hitch ***Required to level Flail-Axe for Quick Hitch *** Required to level Flail-Axe for Quick Hitch 19

23 SAMURAI BOOM 18', 22', 25' Articulated Models STANDARD SPECIFICATIONS 4" X 4" Square Tubular Frame Features a 2 1/2" greaseable "king post" style turning arm. Main pivots points utilize 2' pins with greaseable, hardened steel bushings. Self contained hydraulic system w/integrated oil cooler. 20 gal Front-Mounted Reservoir/35 gal Total System Volume Motor Circuit: Gear Pump 30 gpm (66.5 hp) & 3,800 2,200 rpm. Control Circuit: Gear Pump 12 gpm (21 hp) & 3,000 2,200 rpm. Inner Boom Arm 6"x6"x1/4" Alloy Steel Tubing labor warranty. 120 Horizontal Boom Swing Boom Reach: 18' Models= Up-18' 7", Out-18', Down-5' 1" 22' Models= Up-22' 7", Out-22', Down-9' 1" 25' Models= Up-25' 7", Out-25', Down-12' 1". Mount Kit, Wheel Weight, and Polycarbonate Window Included in Base Price Tractor Req: Min of 8,500 lbs and 90 eng. hp. Min 90" Wheelbase and 18" Ground Clearance HEAD SPECIFICATIONS 58" Cutting Diameter Alloy Deck Material with Double Wall Side Skirt 4-1/2"x9" Heat-Treated Alloy Spindle 152 HP Direct-Coupled Gear Motor Stacked Three-Leaf, Alloy Steel Blade Bar 5/8" x 5" Double -Edged, Tempered Steel Blades, 360 Swing Standard (1) year limited parts and labor warranty. PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Boom Base Unit (One Choice Required) Samurai1.8 Series- 18' Boom Kit- 4wd Tractors (Joystick Control) 7,525 44, Samurai1.8 Series- 18' Boom Kit- 4wd Tractors (Cable Control) 7,525 40, Samurai1.8 Series- 18' Boom Kit- 2wd Tractors (Joystick Control) 7,525 44, Samurai1.8 Series- 18' Boom Kit- 2wd Tractors (Cable Control) 7,525 40, Samurai1.8 Series- 22' Boom Kit- 4wd Tractors (Joystick Control) 7,825 46, Samurai1.8 Series- 22' Boom Kit- 4wd Tractors (Cable Control) 7,825 42, Samurai1.8 Series- 22' Boom Kit- 2wd Tractors (Joystick Control) 7,825 46, Samurai1.8 Series- 22' Boom Kit- 2wd Tractors (Cable Control) 7,825 42, Samurai1.8 Series- 25' Boom Kit- 4wd Tractors (Joystick Control) 8,010 47, Samurai1.8 Series- 25' Boom Kit- 4wd Tractors (Cable Control) 8,010 44,694 Mower Head (One Choice Required) SJ SC SJ 60" Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Swivel Type (Joystick Control)- Samurai Series 1,195 17,275 60" Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Swivel Type (Cable Control)- Samurai Series 1,195 17,275 60" Rotary Cutting Head w/ctr Hyd Door Blade Bar, Non-Swivel- Samurai & Axtreme Series 1,105 15,338 50" Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Swivel Type (Joystick Control)- Samurai Series 1,105 16,454 20

24 SAMURAI BOOM 18', 22', 25' Articulated Models PRODUCT ORDER CODE SC SJ SC SJ SC DESCRIPTION APPRX. WEIGHT LIST PRICE Mower Head (One Choice Required) 50" Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Swivel Type (Cable Control)- Samurai Series 1,050 16,454 50" Rotary Cutting Head w/ctr Hyd Door, Blade Bar, Non-Swivel- Samurai & Axtreme Series 1,065 14,494 50" Rotary Cutting Head w/ctr Hyd Door, Blade Pan, Swivel Type (Joystick Control)- Samurai Series 1,050 15,486 50" Rotary Cutting Head w/ctr Hyd Door, Blade Pan, Swivel Type (Cable Control)- Samurai Series 1,065 15,486 50" Rotary Cutting Head w/ctr Hyd Door, Blade Pan, Non-Swivel- Samurai & Axtreme Series 1,015 14,713 48" Flail-Axe Cutting Head w/ Ctr Hyd Door, Swivel Type (Joystick Control)- Samurai Series ,100 48" Flail-Axe Cutting Head w/ctr Hyd Door, Swivel Type (Cable Control)- Samurai Series , " Flail-Axe Cutting Head w/ctr Hyd Door, Non-Swivel- Samurai & Axtreme Series , SJ 48" Flail-Axe Cutting Head w/ctr Hyd Door, SHD Cuttershaft (3 oz Knives), Swivel Type (Joystick Control)- Samurai Series , SC 48" Flail-Axe Cutting Head w/ctr Hyd Door, SHD Cuttershaft (3 oz Knives), Swivel Type (Cable Control)- Samurai Series , " SHD Grass Flail Cutting Head No Ctr Door, Non-Swivel- Samurai & Axtreme Series , " Battle Axe Flail Cutting Head w/ Cntr Hyd Door, Non-Swivel- Samurai & Axtreme Series- 1,150 19, " SHD Grass Flail Cutting Head No Ctr Door, Non-Swivel- Samurai & Axtreme Series ,730 60" HD Grass Flail, No Ctr Hyd Door, Non-Swivel- Samurai & Axtreme Series , " HD Grass Flail, No Ctr Hyd Door, Swivel Type - Samurai Series , ' Timber Cat Sickle Bar Cutting Head- Samurai & Axtreme Series , ' Timber Cat Sickle Bar Cutting Head- Samurai & Axtreme Series , " Buzzbar (4 Blade) Cutting Head- Samurai & Axtreme Series 1,098 18, " Buzzbar (3 Blade) Cutting Head- Samurai & Axtreme Series , " Buzzbar (2 Blade) Cutting Head- Samurai & Axtreme Series , Ditcher Head, Hitch Post Mounted, Non-swivel- Samurai & Axtreme Series ,587 Options A Additional Operators and Parts Manuals- Samurai Series Booms Quick Hitch Base Kit- Components For End Of Boom and Components For 1 Head- Samurai & Axtreme Boom Series 215 4, Quick Hitch Hydraulic Kit- Components For 1 Head- Samurai & Axtreme Boom Series Flail Cutting Head Storage Stand- 48" Flail Axe- All Boom Series Mounting Charges- Samurai & Axtreme Booms (Labor & Oil) 7, Special Mower Paint- All High Frame/Versa Series Booms 1, Special Tractor Paint- Cab 4wd Tractors 6, S Additional 12 Month Warranty- Samurai Series Booms 4,622 21

25 SAMURAI BOOM 18', 22', 25' Mount Kit Options Note: 25' Samurai units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear Case IH Case Farmall 095/105/115U TIV-A Emissions Cab 4wd (Cable Control)- SAM1.5 Rear Fender Tank Version-18-22' Models N/A Case Farmall 110/120A TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control)- 18' Model. Designed for tractors with flanged rear axles N/A Case Farmall 110/120A TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 18' Model. Designed for tractors with flanged rear axles N/A Case Farmall 110/120A TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control)- 22' Model. Designed for tractors with flanged rear axles N/A Case Farmall 110/120A TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 22' Model. Designed for tractors with flanged rear axles N/A Case Farmall 110/120A TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control)- 25' Model. Designed for tractors with flanged rear axles N/A Case Farmall 110/120A TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 25' Model. Designed for tractors with flanged rear axles N/A Case Farmall 110/120A TIV-B Cab 2wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control) ' Models. Designed for tractors with flanged rear axles. Requires HD Front Axle (NH Order Code # ). Includes Front Axle Stabilizer N/A Case Farmall 110/120A TIV-B Cab 2wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) ' Models. Designed for tractors with flanged rear axles. Requires HD Front Axle (NH Order Code # ). Includes Front Axle Stabilizer N/A Case Maxxum 115/125/135/145 TIV-B Cab 4wd (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control) ' Models. Designed for tractors with flanged rear axles N/A Case Maxxum 115/125/135/145 TIV-B Cab 4wd (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) ' Models. Designed for tractors with flanged rear axles N/A Case Maxxum 115/125/135/145 TIV-B Cab 4wd (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control)- 25' Models. Designed for tractors with flanged rear axles N/A Case Maxxum 115/125/135/145 TIV-B Cab 4wd (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 25' Models. Designed for tractors with flanged rear axles N/A OTHER SPECIFICATIONS (1) Always use the maximum tire size for favorable ground clearance. (2) Tractors must be equipped with flanged rear axles unless otherwise noted. 22

26 SAMURAI BOOM 18', 22', 25' Mount Kit Options Note: 25' Samurai units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear Case Maxxum 110/120 TIV-A Emissions Cab 4wd (Joystick Control) N/A Case Maxxum 110/120 TIV-A Emissions Cab 4wd (Cable Control) N/A Case-IH Maxxum 110/120/130 TIII Emissions Cab 4wd (Joystick Control) N/A Case-IH Maxxum 110/120/130 TIII Emissions Cab 4wd (Cable Control) N/A Case-IH Maxxum 110/120/130 TIII Emissions Cab 4wd (Joystick Control) N/A Case-IH Maxxum 110/120/130 TIII Emissions Cab 4wd (Cable Control) N/A Case Maxxum 115/125/140 TIV-A Emissions Cab 4wd (Joystick Control) N/A Case Maxxum 115/125/140 TIV-A Emissions Cab 4wd (Cable Control) N/A Case-IH Maxxum 115/125/140 TIII Emissions Cab 4wd (Joystick Control) N/A Case-IH Maxxum 115/125/140 TIII Emissions Cab 4wd (Cable Control) N/A Case-IH Maxxum 115/125/140 TIII Emissions Cab 4wd (Joystick Control) N/A Case-IH Maxxum 115/125/140 TIII Emissions Cab 4wd (Cable Control) N/A Challenger Challenger MT445/455/465D TIV-A Emissions Cab 4wd Current SAM1.0 Front Tank Version (Joystick Control) N/A Challenger MT445/455/465D TIV-A Emissions Cab 4wd Cuurent SAM1.0 Front Tank Version (Joystick Control) N/A Challenger MT445B/455B/465B Cab/4wd (Tier III Engine Only / Cable) N/A Challenger MT445B/455B/465B Cab/2wd (Tier III Engine Only / Frt Axle Stabilizer Not Incl. / Joystick) N/A Challenger MT445B/455B/465B Cab/4wd (Tier III Engine Only / Joystick) N/A John Deere JD 5085/5100/5115E TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control) ' Models Only. Designed for tractors with flanged rear axles N/A JD 5085/5100/5115E TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Axis- Lever Cable Control) ' Models Only. Designed for tractors with flanged rear axles N/A JD 5085/5100/5115M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control) ' Models Only. Designed for tractors with flanged rear axles N/A JD 5085/5100/5115M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control) - 22' Models Only. Designed for tractors with flanged rear axles N/A JD 5085/5100/5115M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) - 18' Models. Designed for tractors with flanged rear axles N/A JD 5085/5100/5115M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) - 22' Models. Designed for tractors with flanged rear axles N/A OTHER SPECIFICATIONS (1) Always use the maximum tire size for favorable ground clearance. (2) Tractors must be equipped with flanged rear rims unless otherwise noted. 23

27 SAMURAI BOOM 18', 22', 25' Mount Kit Options Note: 25' Samurai units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION John Deere 2WD Front 4WD Front Rear JD 6105/6120E TIV-B Cab 4wd Series (2015- Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control) 18-22' Models. Designed for tractors with flanged rear axles N/A JD 6105/6120E TIV-B Cab 4wd Series (2015- Current)- Sales Note: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) 18-22' Models. Designed for tractors with flanged rear axles N/A JD 6105/6120E TIV-B Cab 4wd Series (2015- Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control) 25' Model. Designed for tractors with flanged rear axles. JD 6105/6120E TIV-B Cab 4wd Series (2015- Current)- Sales Note: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) 25' Model. Designed for tractors with flanged rear axles. MOUNT KIT MAXIMUM TIRE SIZE TBD- Call For Availability N/A TBD- Call For Availability N/A JD 6105/6115D Series Interim TIV Cab/4wd (Joystick) N/A JD 6105/6115D Series Interim TIV Cab/4wd (Cable control) N/A JD 6110/6120/6130M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control) ' Models. Designed for tractors with flanged rear axles N/A JD 6110/6120/6130M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) ' Models. Designed for tractors with flanged rear axles N/A JD 6110/6120/6130M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control)- 25' Models. Designed for tractors with flanged rear axles N/A JD 6110/6120/6130M TIV-B Cab 4wd Series (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 25' Models. Designed for tractors with flanged rear axles N/A JD 6105/6115/6125M Series Interim TIV Cab/4wd (Joystick) N/A JD 6105/6115/6125M Series Interim TIV Cab/4wd (Cable control) N/A JD 6110/6210/6310/6405/6410 Cab/2wd (Frt Axle Stabilizer Not Incl. / Joystick) N/A JD 6110/6210/6310/6405/6410 Cab/4wd (Frt Axle Stabilizer Not Incl. / Joystick) N/A JD 6120/6215/6220/6320/6415/6420 Cab/4wd (Joystick) N/A JD 6120/6215/6220/6320/6415/6420 ROPS/2wd (Cable) N/A JD 6230/6330/6430 "Mid-Spec" Cab/4wd (Cable) N/A JD 6230/6330/6430 "Mid-Spec" Cab/2wd (Joystick) N/A JD 6230/6330/6430 "Mid-Spec" Cab/4wd (Joystick) N/A JD 6230/6330/6430 "Mid-Spec" ROPS/4wd (Joystick) N/A JD 7210/7410/7510 Cab/2wd (Cable) N/A JD 7130/7230 "Mid-Spec" Cab/2wd (Frt Axle Stabilizer Not Incl. / Joystick) N/A JD 7130/7230 "Mid-Spec" Cab/4wd (Cable) N/A JD 7130/7230 "Mid-Spec" Cab/4wd (Joystick) N/A McCormick McCormick T-Max 100/ TIII Emissions Cab 4wd (Cable Control) N/A Massey Ferguson MF 5465/5475 Cab/4wd (Tier III Engine Only - Cable) N/A MF 5465/5475 Cab/4wd (Tier III Engine Only - Joystick) N/A OTHER SPECIFICATIONS (1) Always use the maximum tire size for favorable ground clearance. (2) Tractors must be equipped with flanged rear rims unless otherwise noted. 24

28 SAMURAI BOOM 18', 22', 25' Mount Kit Options Note: 25' Samurai units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT 2WD Front 4WD Front Rear New Holland NH T6020/6040/6060 Cab/4wd (Built Before May 2010 / Cable) N/A NH T6020/6040/6060 Cab/4wd (Built After May 2010 / Cable) N/A NH T6020/6040/6060 Cab/4wd (Built Before May 2010 / Joystick) N/A NH T6020/6040/6060 Cab/4wd (Built After May 2010 / Joystick) N/A NH T6030/6050/6070/6080 Cab/4wd (Built Before May 2010 / Cable) N/A NH T6030/6050/6070/6080 Cab/4wd (Built After May 2010 / Cable) N/A NH T6030/6050/6070/6080 Cab/4wd (Built After May 2010 / Joystick) N/A New Holland TS6.110/120 TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control)- 18' Model. Designed for tractors with flanged rear axles N/A New Holland TS6.110/120 TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 18' Model. Designed for tractors with flanged rear axles N/A New Holland TS6.110/120 TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control)- 22' Model. Designed for tractors with flanged rear axles N/A New Holland TS6.110/120 TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 22' Model. Designed for tractors with flanged rear axles N/A New Holland TS6.110/120 TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control)- 25' Model. Designed for tractors with flanged rear axles N/A New Holland TS6.110/120 TIV-B Cab 4wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 25' Model. Designed for tractors with flanged rear axles N/A New Holland TS6.110/120 TIV-B Cab 2wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control) ' Models. Designed for tractors with flanged rear axles. HD Front Axle (NH Order Code # ). Includes Front Axle Stabilizer Requires TBD- Call For Availability N/A New Holland TS6.110/120 TIV-B Cab 2wd Series (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) ' Models. Designed for tractors with flanged rear axles. Requires HD Front Axle (NH Order Code # ). Includes Front Axle Stabilizer N/A NH TS6.110/6.115/6.120 TIII Emissions Cab 4wd (Joystick Control) N/A NH TS6.110/6.115/6.120 TIII Emissions Cab 4wd (Cable Control) N/A NH TS6.125/6.140 TIII Emissions Cab 4wd ( Joystick Control) N/A NH TS6.125/6.140 TIII Emissions Cab 4wd (Cable Control) N/A OTHER SPECIFICATIONS (1) Always use the maximum tire size for favorable ground clearance. (2) Tractors must be equipped with flanged rear rims unless otherwise noted. MAXIMUM TIRE SIZE 25

29 SAMURAI BOOM 18', 22', 25' Mount Kit Options Note: 25' Samurai units are to be mounted on 4WD model tractors only TRACTOR DESCRIPTION MOUNT KIT 2WD Front 4WD Front Rear New Holland New Holland T6.145/1155/165/175 TIV-B Cab 4wd (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Joystick Control) ' Models. Designed for tractors with flanged rear axles N/A New Holland T6.145/1155/165/175 TIV-B Cab 4wd (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control) ' Models. Designed for tractors with flanged rear axles N/A New Holland T6.145/1155/165/175 TIV-B Cab 4wd (2015-Current)- Sales Note: SAM1.8 Rear Fender Tank (Joystick Control)- 25' Models. Designed for tractors with flanged rear axles. TBD- Call For Availability N/A New Holland T6.145/1155/165/175 TIV-B Cab 4wd (2015-Current)- Sales Notes: SAM1.8 Rear Fender Tank (Axis-Lever Cable Control)- 25' Models. Designed for tractors with flanged rear axles. MAXIMUM TIRE SIZE TBD- Call For Availability N/A NH T6.140/6.150/6.160 TIV-A Emissions Cab 4wd (Joystick Control) N/A NH T6.140/6.150/6.160 TIV-A Emissions Cab 4wd (Cable Control) N/A NH T6.155/6.165/6.175 TIV-A Emissions Cab 4wd (Joystick Control) N/A NH T6.155/6.165/6.175 TIV-A Emissions Cab 4wd (Cable Control) N/A

30 VERSA BOOM 17', 20', 23' Articulated Models STANDARD SPECIFICATIONS HEAD SPECIFICATIONS Welded Steel Plate Frame Braced to the Front Bolster & Rear Axle 60" Boom-Axe Head 60-Gallon Hydraulic Reservoir with 12-Micron Filtration 10-Gauge Deck with 1/4" Side Skirts 1300 lbs. Counterwight Tank Mounted Full-Length Replaceable Skid Shoes 4" King Post with 3" Tapered Roller Bearings 4-1/2" Hardened Spindle Inner Boom Arm 6"x6"x1/4" Steel Tubing 90 HP Motor Directly Splined to the Spindle Exterior Boom Arm 5"x5"x1/4" Steel Tubing 5/8" x 5" Double -Edged, Tempered 120 Horizontal Boom Swing Steel Blades, 360 Swing Stacked Hydraulic Pump PSI Standard (1) year limited parts and labor warranty. labor warranty. Boom Reach: 17' Models= Up-19'6", Out-18'9", Down-8'9" 20' Models= Up-20'3", Out-20'7", Down-12'3" 23' Models- Up-22'10", Out-23'10", Down-15'6" Axle-Mounted Boom Rest Mount Kit, 1,300# Wheel Weight & Polycarbonate Window Included in Base Price PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Versa Boom Base Unit (One Choice Required) Due to design constraints the Versa Boom will not be available for mounting on most Tier IV-B tractors. See Samurai Models Versa Series- 17' Boom Kit (Joystick Control) 3,850 47, Versa Series- 17' Boom Kit (Cable Control) 3,800 37, Versa Series- 20' Boom Kit (Joystick Control) 4,050 48, Versa Series- 20' Boom Kit (Cable Control) 4,000 40, Versa Series- 23' Boom Kit (Joystick Control) 4,150 50, Versa Series- 23' Boom Kit (Cable Control) 4,100 41,654 Mower Head (One Choice Required) See Options Below for Extra Mower Head Options " Rotary Cutting head w/mech Cnter Door, Blade Bar, Non- Swivel- Versa/Rear-Mount Boom Series , Swivel- Versa/Rear-Mount Boom Series , Swivel- Versa/Rear-Mount Boom Series , " Flail Axe Cutting Head w/ Fixed Ctr Door, Non-Swivel- Versa/Rear-Mount Boom Series , " SHD Flail Cutting Head, Non-Swivel- Versa/Rear-Mount Boom Series , Versa/Rear-Mount Boom Series 1,098 19, Versa/Rear-Mount Boom Series , Versa/Rear-Mount Boom Series , Versa/Rear-Mount Boom Series , Versa/Rear-Mount Boom Series , Ditcher Head, Ctr Hyd Chute, Hitch-Post Mounted, Gear-Type- Versa/Rear-Mount Boom Series , Ditcher Head Hose Kit- Tractor Aux to Chute, 17' Booms- Versa/Rear-Mount Boom Series Ditcher Head Hose Kit- Tractor Aux to Chute, 20' Booms- Versa/Rear-Mount Boom Series Ditcher Head Hose Kit- Tractor Aux to Chute, 23' Booms- Versa/Rear-Mount Boom Series 50 1,044 ***** Required to operate Ditcher Head Discharge Chute 27

31 VERSA BOOM 17', 20', 23' Articulated Models PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Additional Operators and Parts Manuals- Versa Series Mowers & Booms Quick Hitch Base Kit- Components For End Of Boom and Components For 1 Head- Versa/Rear Mount Boom Series 0 3,099 Quick Hitch Hydraulic Kit- Hydraulic Components For 1 Head Versa/Rear Mount Boom Series Flail Cutting Head Storage Stand- 48" Flail Axe- All Boom Series Flail Cutting Head Storage Stand- 60" SHD Flail- All Boom Series Ditcher Head Storage Stand- All Boom Series VBAxleStab Front Axle Stabilizer Kit, 4wd Tractors Only- Versa Boom Series 0 1,655 VRSAPumpGrd Pump Guard- Protects Front Pumps on Versa Units JD 7020 & 7030 "Prem" Whl Wt Adapter (38" Rack & Pinion) Kits Below Are To Interchange A Versa Mower/Head With Your Existing Boom- Also Requires Purchase of the Versa Mower Head Separately (See Versa Mower Page) Versa Boom to Mower Interchange Kit- Extension Arm- Non Breakaway- Versa Boom Series 280 4,596 Versa Boom to Mower Interchange Kit- Extension Arm- Non Breakaway- Versa Boom Series 280 4, Additional 408 lb. Kit (3-136 lb, 25" Dia (Small), 1" Thick Plates and Hardware) for use with 1300 lb. Wheel Weight- All Boom Series 408 1,874 Additional 680 lb. Kit (5-136 lb, 25" Dia (Small), 1" Thick Plates and Hardware) for use with 1300 lb. Wheel Weight- All Boom Series 680 2, Mounting Charges- Versa & RM Booms (Labor & Oil) 8, Special Mower Paint- All High Frame/Versa Series Booms 1, Special Tractor Paint- Cab 4wd Tractors 6, VB Additional 12 Month Warranty- Versa Boom Series 4,622 * Includes all components to convert boom and (1) head to Quick Hitch ** Required to convert additional heads to Quick Hitch *** Required to level Flail-Axe for Quick Hitch **** Required to level SHD Flail for Quick Hitch ****** Required to level Ditcher for Quick Hitch 28

32 VERSA BOOM 17", 20", 23' Mount Kits TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear Case IH Case-IH Farmall 85U/95U/105U Cab/2&4wd (Cable/Fender Tank) Case-IH Farmall 85U/95U/105U Cab/2&4wd (Joystick/Fender Tank) Case-IH Farmall 85U/95U/105U ROPS/2&4wd (Fender Tank) Case-IH JX1080U/1090U/1100U Cab/2&4wd (Cable/Fender Tank) Case-IH JX1080U/1090U/1100U Cab/2&4wd (Joystick/Fender Tank) Case-IH JX1080U/1090U/1100U ROPS/2&4wd (Fender Tank) Case-IH Maxxum 115/125/125 Pro/140 Pro Cab 2 & 4wd TIII Emissions (Joystick/Fender Tank) Case-IH Maxxum 115/125/125 Pro/140 Pro Cab 2 & 4wd TIII Emissions (Factory Loader Valve/Cable Control/Fender Tank) Case-IH Maxxum 115/125/125 Pro/140 Pro Cab 2 & 4wd TIII Emissions (540 PTO Pump/Joystick/Fender Tank) Case-IH Maxxum 115/125/125 Pro/140 Pro Rops 2 & 4wd TIII Emissions (Fender Tank) Case-IH MXU100/110 Cab 2wd TII Emissions (Cable/Fender Tank) N/A Case-IH MXU100/110 Cab 2wd TII Emissions (Joystick/Fender Tank) N/A Case-IH MXU100/110 Cab 4wd TII Emissions (Cable/Fender Tank) N/A Case-IH MXU115/125/130/135 Cab/2&4wd (Cable/Fender Tank) Case-IH MXU115/125/130/135 Cab/2&4wd (Joystick/Fender Tank) Case-IH MXU115/125/130/135 ROPS/2&4wd (Cable/Fender Tank) John Deere JD 5085/5100E Series Cab 4wd TIV-B Emissions (Joystick Control/Fender tank) Sales Note: Because of the larger exhaust SCR, using a 2wd Tractor for this application will result in significantly limited ground clearance N/A JD 5085/5100E Series Cab 4wd TIV-B Emissions (Cable Control/Fender tank) Sales Note: Because of the larger exhaust SCR, using a 2wd Tractor for this application will result in significantly limited ground clearance N/A JD 5083E/5093E/5101E Cab 4wd TIII Emissions (New Rail Design- Joystick Control/Fender Tank)- 17'-20' Booms Only N/A JD 5083E/5093E/5101E Cab 4wd TIII Emissions (New Rail Design- Cable Control/Fender Tank)- 17'-20' Booms Only N/A JD 5085/5100/5115M Series Cab 2 & 4wd TIV-B Emissions Current (Joystick Control/Fender tank) Sales Note: Because of the larger exhaust SCR, using a 2wd Tractor for this application will result in significantly limited ground clearance N/A JD 5085/5100/5115M Series Cab 2 & 4wd TIV-B Emissions 2015-Current (Cable Control/Fender tank) Sales Note: Because of the larger exhaust SCR, using a 2wd Tractor for this application will result in significantly limited ground clearance TBD- Call For Availability N/A JD 5085/5100/5110M- Series Cab 2wd TIII Emissions (New Rail Design- Joystick Control/Fender Tank)- 17'-20' Booms Only L-15 N/A JD 5085/5100/5110M- Series Cab 2wd TIII Emissions (New Rail Design- Cable Control/Fender Tank)- 17'-20' Booms Only L-15 N/A JD 5085/5100/5110M- Series Cab 4wd TIII Emissions (New Rail Design- Cable Control/Fender Tank)- 17'-20' Booms Only N/A JD 5085/5100/5110M- Series Cab 4wd TIII Emissions (New Rail Design- Joystick Control/Fender Tank)- 17'-20' Booms Only N/A JD 5425/5525/5625 Cab 2 & 4wd (Cable/Fender Tank) JD 5425/5525/5625 Cab 2 & 4wd (Joystick/Fender Tank) JD 5603 Cab/4wd (Cable/Fender Tank) N/A JD 5603 Cab/4wd (Joystick/Fender Tank) N/A OTHER SPECIFICATIONS Always use the maximum tire size for favorable ground clearance. Tractors must be equipped with flanged rear rims unless otherwise noted. 29

33 VERSA BOOM 17", 20", 23' Mount Kits TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear John Deere JD 6105/6115/6125M Series Interim-TIV Cab 4wd (Joystick Control/Fender tank) N/A JD 6105/6115/6125M Series Interim-TIV Cab 4wd (Cable control/fender tank) N/A JD 6110/6210/6310/6405/6410 Cab 2wd (Cable Control/Fender Tank) /18 N/A JD 6110/6210/6310/6405/6410 Cab 2wd (Joystick Control/Fender Tank) /18 N/A JD 6110/6210/6310/6405/6410 Cab 4wd (Cable Control/Fender Tank) N/A JD 6215/6415 Cab/2&4wd (Cable/Mid-Mt Tank) JD 6215/6415 Cab/2&4wd (Cable/Fender Tank) JD 6215/6415 Cab/2&4wd (Joystick/Mid-Mt Tank) JD 6215/6415 ROPS/2&4wd (Mid-Mt Tank) JD 6120/6220/6320/6420 (Tier II) Cab/2&4wd (Cable/Mid-Mt Tank) JD 6120/6220/6320/6420 (Tier II) Cab/2&4wd (Cable/Fender Tank) JD 6120/6220/6320/6420 (Tier II) Cab/2&4wd (Joystick/Mid-Mt Tank) JD 6120/6220/6320/6420 (Tier II) Cab/2&4wd (Joystick/Fender Tank) JD 6120/6220/6320/6420 (Tier II) ROPS/2&4wd (Cable/Mid-Mt Tank) JD 6230/6330/6430 "Mid-Spec" Cab/2&4wd (Cable/Fender Tank) JD 6230/6330/6430 "Mid-Spec" Cab/2&4wd (Joystick/Fender Tank) JD 6230/6330/6430 "Mid-Spec" ROPS 2wd (Fender Tank) L-16 N/A JD 6230/6330/6430 "Mid-Spec" ROPS 4wd (Fender Tank) N/A JD 6230/6330/6430 "Premium" Cab/2&4wd (Cable/Fender Tank) JD 6230/6330/6430 "Premium" Cab/2&4wd (Joystick/Fender Tank) JD 6615/6715 Cab/2&4wd (Cable/Mid-Mt Tank) JD 6615/6715 Cab/2&4wd (Joystick/Mid-Mt Tank) JD 7220/7320/7420/7520 Cab/2&4wd (Cable/Mid-Mt Tank) JD 7220/7320/7420/7520 Cab/2&4wd (Joystick/Mid-Mt Tank) JD 7130/7230 "Mid Spec" Cab 2/4wd (w/55 gal. fuel tank/cable/fender Tank) JD 7130/7230 "Mid Spec" Cab 2/4wd (w/55 gal. fuel tank/joystick/fender Tank) JD 7130/7230 "Mid Spec" Cab 2/4wd (w/673 Loader Pkg/ 55 gal. fuel tank/joystick/fender Tank) JD 7130/7230 "Mid Spec" ROPS 2/4wd (w/55 gal. fuel tank/joystick/fender Tank) Massey Ferguson MF 2650/2660 Cab 4wd (Joystick Control/Fender Tank) N/A New Holland NH T5040/5050/5060/5070 Cab 2/4wd (Cable/Fender Tank) NH T5040/5050/5060/5070 Cab 2/4wd (Joystick/Fender Tank) NH T5040/5050/5060/5070 ROPS 2/4wd (Fender Tank) NH T5.95/105/115 Cab 2 & 4wd (Fender Tank) NH T6010/6020/6040/6060 Cab/2wd (Cable/Fender Tank) N/A NH T6010/6020/6040/6060 Cab/2wd (Joystick/Fender Tank) N/A NH T6010/6020/6040/6060 Cab/4wd (Cable Control/Fender Tank) N/A NH T6010/6020/6040/6060 Cab/4wd (Joystick/Fender Tank) N/A NH T6010/6020 "Delta" ROPS/2wd (Fender Tank) N/A NH T6010/6020 Cab 2wd Models with Bar-style axles (Joystick Control/Fender Tank) N/A NH T6030/6050/6070 Cab/2&4wd (Flanged Wheel Axle/Cable/Fender Tank) NH T6030/6050/6070 Cab/2&4wd (Rack & Pinion Axle/Cable/Fender Tank) NH T6030/6050/6070 Cab/2&4wd (Joystick/Fender Tank) NH T6030/6050/6070 Cab 2/4wd (Factory Loader Valve/Cable Control/Fender Tank) NH T6030/6050/6070 Cab/2&4wd (540 PTO Pump/Joystick/Fender Tank) OTHER SPECIFICATIONS Always use the maximum tire size for favorable ground clearance. Tractors must be equipped with flanged rear rims unless otherwise noted. 30

34 VERSA BOOM 17", 20", 23' Mount Kits TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear New Holland NH T6030/6050 ROPS/2&4wd (Fender Tank) NH TL80/90/100 Cab/2&4wd (Cable/Fender Tank) NH TL80A/90A/100A Cab/2&4wd (Cable/Fender Tank) NH TL80A/90A/100A Cab/2&4wd (Joystick/Fender Tank) NH TL80A/90A/100A ROPS/2&4wd (Fender Tank) NH TS100A/110A Cab 2wd (Cable/Fender Tank) N/A NH TS100A/110A Cab 2wd (Joystick/Fender Tank) N/A NH TS100A/110A Cab 4wd (Cable/Fender Tank) N/A NH TS115A/125A/130A/135A Cab/2&4wd (Cable/Fender Tank) NH TS115A/125A/130A/135A Cab/2&4wd (Joystick/Fender Tank) NH T6030/6050/6070 Cab 2/4wd (Factory Loader Valve/Cable Control/Fender Tank) NH TS115A/125A/130A/135A Cab/2&4wd (540 PTO Pump/Joystick/Fender Tank) NH TS115/125/130/135- A Series Cab 2/4wd (Factory Loader Valve/Joystick/Fender Tank) NH TS115A/125A/130A/135A ROPS/2&4wd (Fender Tank) NH TS6020/6030 Cab/2wd (Cable/Fender Tank) N/A NH TS6020/6030 ROPS/2wd (Fender Tank) N/A NH TS6.110/120 Series Cab 2 & 4wd TIV-B Emissions (Cable Control/Fender tank)- Sales Note: Because of the larger exhaust SCR, using a 2wd Tractor for this application will result in significantly limited ground clearance NH TS6.110/6.120 Cab/ 2wd & 4wd (Cable Control/Fender Tank) NH TS6.110/6.120 Cab/ 2wd & 4wd (Joystick Control/Fender Tank) OTHER SPECIFICATIONS Always use the maximum tire size for favorable ground clearance. Tractors must be equipped with flanged rear rims unless otherwise noted. 31

35 FALCON HYDRAULIC ROTARY Flex- Wing Mower STANDARD SPECIFICATIONS 540 PTO Available In 10' or 15' Cutting Width Minimum Tractor Requirement: 75 PTO hp 1/4" x 10-1/2" Bolt-On Side Skirts 3 Rear Remotes Required on Tractor For Proper Operation 35-Gallon Reservoir with Dual Filtration Wing Motor Cutoff - standard 63-HP Center Motor, 58-HP wing motor labor warranty. Concrete Fill not Included Standard (1) year limited parts and labor warranty. Double Row Chainguards Hydraulically Folding Wings Pan Assembly Updraft Blades Replaceable Skid Shoes 5/8" x 5" Double -Edged, Tempered Steel Blades, 360 Swing Standard (1) year limited parts and labor warranty. Deck Rings - standard Dual Level Lift Rods PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Falcon 10' Bat-Wing Rotary Mower, 540 rpm, Pan w/deck Rings 0 32, Falcon 15' Bat-Wing Rotary Mower, 540 rpm, Pan w/deck Rings 6,400 39,082 NOTE: TRACTOR MUST BE EQUIPPED WITH 3 REAR REMOTES FOR PROPER OPERATION Wheel & Tire Options (One Choice Required) (Five) Implement Tires & Wheels ( / 6 ply) 200 1, (Five) Recapped Airplane Tires (22 ply) 390 1, (Five) 15" Wheels (Wheels Only) (Five) Laminated Tires & Wheels 375 1, Base Unit (One Choice Required) (Five) Foam Filled Used Airplane Tire & Wheel (Standard Choice For 10 Ft. Models) 375 1, (Six) Implement Tires & Wheels ( / 6 ply) 240 1, (Six) Recapped Airplane Tires (22 ply) 468 2, (Six) 15" Wheels (Wheels Only) (Six) Laminated Tires & Wheels 450 1, (Six) Foam Filled Used Airplane Tire & Wheel (Included in Standard Pricing for 15 Ft. Models) 450 1,650 32

36 FALCON HYDRAULIC ROTARY Flex- Wing Mower Additional Operators and Parts Manuals- Falcon Series Mowers Falcon 15 Auxiliary Spindle Kit for Dual Wheels On Both Wings (Requires 2 Additional Tires and Wheels) Falcon 10 Auxiliary Spindle Kit for Dual Wheels On Wing (Requires 1 Additional Tire and Wheel) Single Wheel and Tires For Spindle Kits Above Additional Options 27" Foam-Filled Used Airplane Tire & Wheel (Standard Choice Wheel and Tire) 75 each Laminated Tire & Wheel 75 each Implement Tire & Wheel 40 each Used Airplane Tire & Wheel 75 each Asy, Winch & Stand - Falcon 10/ Captive Ball Hitch (2 5/16" Ball) Pintle Hitch Kit (Requires Tractor Drawbar Modification) Falcon 10: Concrete Filler for Weight Box (706 lbs.) Cylinder Stroke Control Segments Fan Reverser Kit- Standard Equipment on units after 09/01/ F1 Special Mower Paint ( )- 15' Falcon/Eagle Series Rear Rotary Mowers F3 Additional 12 Month Warranty- Falcon Series Mowers 4,666 33

37 VERSA MOWER 60", 72", 74" Mid-Mount Rotary/Flails STANDARD SPECIFICATIONS Welded Steel Plate Frame Braced to the Front Bolster & Rear Axle 60-Gallon Hydraulic Reservoir with 12-Micron Filtration Lift Frame Capable of Tilting the Head 180 Lift Frame is Capable of Lifting the Head 17" Above & 6" Below Grade Level Exterior Boom Arm 5"x5"x1/4" Steel Tubing Stacked Hydraulic Pump PSI 2-Spool, Open Center, Tapered Positive Metering Valve Tractor Req: 60 HP labor warranty. HEAD SPECIFICATIONS 60" Mower Head 1/4" Gauge Deck with 3/8" Side Skirts Channel Reinforcements on the Top Deck Spindle Mounting Plate is 1" at the Spindle 90 HP Gear Motor Directly Splined to the Spindle 5/8" x 5" Double -Edged, Tempered Steel Blades, 360 Swing Standard (1) year limited parts and labor warranty. Front & Rear Chain Guards Standard (1) year limited parts and labor warranty PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE Versa Mower Base Unit (One Choice Required) Versa Series Rotary/Flail Mower Kit- Ext Service Ext Arm- TIV-B Cab Tractors- Short Ext Arm (Recommended For Most Applications) 2,300 8,276 Versa Series Rotary/Flail Mower Kit- Ext Service Ext Arm- TIV-B Cab Tractors 2,300 8,276 Versa Series Rotary/Flail Mower Kit- Ext Service Ext Arm- TIV-B Cab Tractors- Short Frame y Version (JD E C/2 Only) 2,300 8,276 Cab/Rops Tractors- Short Ext Arm- Single Pump (Cutting Circuit Only)- Requires 2 Open Sets of Hydraulic Remotes On Tractor To Operate 2,300 7, Versa Series Rotary/Flail Mower Kit- Ext Service Ext Arm- TIV-B Rops Tractors- Short Ext Arm (Recommended For Most Applications) 2,300 7,944 Versa Series Rotary/Flail Mower Kit- Ext Service Ext Arm- TIV-B Rops Tractors 2,300 7,944 Versa Series Rotary/Flail Mower Kit- Ext Service Ext Arm- TIV-B Cab Tractors- Short Ext Arm- Single Pump (Cutting Circuit Only)- Requires 2 Open Sets of Hydraulic Remotes On Tractor To Operate 2,300 7,192 Versa Series Rotary/Flail Mower Kit- Ext Service Ext Arm- TIV-B Cab/Rops Tractors- Short Ext Arm- Single Pump (Cutting Circuit Only)- Requires 2 Open Sets of Hydraulic Remotes On Tractor To Operate 2,300 7,192 Breakaway Extension Arms Below Are Not For Use On 72" Rotary Models Versa Series Rotary/Flail Mower Kit- Ext Service Breakaway Ext Arm- TIV-B Cab Tractors- (Recommended For Most Applications) 2,300 10,980 Versa Series Rotary/Flail Mower Kit- Ext Service Breakaway Ext Arm- TIV-B Cab/Rops Tractors- Single Pump (Cutting Circuit Hydraulics Only)- Requires 3 Open Sets of Hydraulic Remotes On Tractor To Operate 2,300 10,980 Versa Series Rotary/Flail Mower Kit- Ext Service Breakaway Ext Arm- TIV-B Rops Tractors- (Recommended For Most Applications) 2,300 10,980 34

38 VERSA MOWER 60", 72", 74" Mid-Mount Rotary/Flails MOWER HEAD (One Choice Required) 60" Rotary Cutting Head- Blade Bar, Front & Rear Chain Guards- Versa Mower Series 1,050 10,618 60" Rotary Cutting Head- Blade Bar, Front & Rear Chain Guards, 1/4" Deck- Versa Mower Series 1,100 11,406 60" Rotary Cutting Head- Blade Pan, Front & Rear Chain Guards- Versa Mower Series 1,100 11,609 60" Rotary Cutting Head- Blade Pan, Front & Rear Chain Guards, 1/4" Deck- Versa Mower Series 1,150 12,415 60" Rotary Cutting Head- Blade Bar, Front & Rear Chain Guards, Breakaway Model- Versa Mower Series 1,050 11,435 60" Rotary Cutting Head- Blade Pan, Front & Rear Chain Guards, Breakaway Model- Versa Mower Series 1,100 12,527 60" Rotary Cutting Head- Blade Bar, Front & Rear Chain Guards, Tail Wheel- Versa Mower Series 1,140 11,589 60" Rotary Cutting Head- Blade Pan, Front & Rear Chain Guards, Tail Wheel- Versa Mower Series 1,190 12,592 60" Rotary Cutting Head- Blade Bar, Front & Rear Chain Guards, 1/4" Deep Deck- Versa Mower Series (Requires Rear Roller Kit) 1,050 12,898 60" Rotary Cutting Head- Blade Pan, Front & Rear Chain Guards, 1/4" Deep Deck- Versa Mower Series (Requires Rear Roller Kit) 1,125 14, Rear Roller Kit (Required for 60" Deep-Deck Versa Heads) 75 1,314 72" Rotary Models Below Are Not For Use On Breakaway Extension Arms 72" Rotary Cutting Head- Blade Bar, Front & Rear Chain Guards- Versa Mower Series 1,270 12,501 72" Rotary Cutting Head- Blade Pan, Front & Rear Chain Guards- Versa Mower Series 1,320 13,423 35

39 VERSA MOWER 60", 72", 74" Mid-Mount Rotary/Flails PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE MOWER HEAD (One Choice Required) " Flail Cutting Head- Belt Drive, CC Knives (3oz)- Versa Mower Series , " Flail Cutting Head- Belt Drive, ES Knives (4oz)- Versa Mower Series , " Flail Cutting Head- Belt Drive, CC Knives (3oz)- Versa Mower Series , " Flail Cutting Head- Belt Drive, ES Knives (4oz)- Versa Mower Series , Ditcher Attachment, Long Arm Type (Motor- 59 5/16" from pin)- Versa Mower Series , Ditcher Head Hose Kit- Tractor Aux to Chute, 17' Booms- Versa/Rear- Mount Boom Series Ditcher Head Hose Kit- Tractor Aux to Chute, 20' Booms- Versa/Rear- Mount Boom Series Ditcher Head Hose Kit- Tractor Aux to Chute, 23' Booms- Versa/Rear Mount Boom Series 50 1,044 Options (Continued) VRSAPumpGrd Pump Guard- Protects Front Pumps on Versa Units VRSALexanKit Polycarbonate Door & Side Window Kit- Tractor Model Specific RH Side Protection- Versa Series 75 2, Cable & Clamp Kit- 60" Versa Mower Heads- Retains bottom links of chainguards Cable & Clamp Kit- 72" Versa Mower Heads- Retains bottom links of chainguards Tilt Cylinder Kit - JD 7000 Series- Cylinder Replaces Tractor's LH- 3pt Lift Arm- Versa Mower Series Rear Tail Wheel Assembly- Rotary Cutting Heads- Weld-On Kit- Versa Mower Series 85 1, Side Gauge Wheel Assembly- 60" Deep-Deck Cutting Heads Only Weld- On Kit- Versa Mower Series Universal Wheel Weight Kit- 500 lbs. Cast Kit- All Mower Series 500 1, Universal Wheel Weight Kit lbs. Cast Kit- All Boom Series 1,300 3, Additional Operators and Parts Manuals- Versa Series Mowers & Booms Mounting Charges- Versa Mower (Labor & Oil) 7, V7 Special Mower Paint ( )- Versa Rotary Series Mowers Special Tractor Paint- Cab 4wd Tractors 6, VM Additional 12 Month Warranty- Versa Mower Series 4,666 NOTE: ALL ORDERS FOR VERSA MOWER UNITS REQUIRE THE PURCHASE OF A MOUNT KIT TO COMPLETE AN INSTALLATION (See Next Pages) 36

40 VERSA MOWER 60", 72", 74" Mid-Mount Rotary/Flail Mount Kit Options TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear Case IH Case-IH Farmall 85U/95U/105U Cab/2&4wd (Fender Tank) ,117 Case-IH Farmall 85U/95U/105U Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 Case-IH Farmall 85U/95U/105U ROPS/2&4wd (Fender Tank) ,117 Case-IH Maxxum 110/110 Pro/120 Pro/130 Pro Cab/2wd (Fender Tank) N/A ,117 Case-IH Maxxum 110/110 Pro/120 Pro/130 Pro Cab/2wd (Tractor Hyd/Fender Tank) N/A ,117 Case-IH Maxxum 110/110 Pro/120 Pro/130 Pro Cab/4wd (Fender Tank) N/A ,117 Case-IH Maxxum 115/125/125 Pro/140 Pro Cab/2&4wd (Fender Tank) ,117 Case-IH Maxxum 115/125/125 Pro/140 Pro Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 Case-IH Maxxum 115/125/125 Pro/140 Pro ROPS/2&4wd (Fender Tank) ,117 Case-IH MXU100/110 Cab/2wd (Mid-Mt Tank) N/A ,117 Case-IH MXU100/110 Cab/2wd (Tractor Hyd/Mid-Mt Tank) N/A ,117 Case-IH MXU100/110 Cab/4wd (Fender Tank) N/A ,117 Case-IH MXU100/110 ROPS/2wd (Mid-Mt Tank) N/A ,117 Case-IH MXU115/125/130/135 Cab/2&4wd (Fender Tank) ,117 Case-IH MXU115/125/130/135 Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 Case-IH MXU115/125/130/135 ROPS/2&4wd (Fender Tank) ,117 Challenger Challenger MT445B/455B/465B Cab/2&4wd (Tier III Engine Only/Fender Tank) ,117 John Deere JD 5065/5075M Series Cab 2 & 4wd (Cable Control/Fender Tank) TBD ,117 JD 5065/5075M Series Cab 2 & 4wd (Tractor Hydraulic Stack Control/Fender Tank) ,117 JD 5065/5075M Series Rops 2 & 4wd (Cable Control/Fender Tank) ,117 JD 5083E/5093E/5101E Limited Cab/4wd (Fender Tank/Loader J-stick Control/AI Valve) L ,117 JD 5085/5100E Series Cab 4wd TIV-B Emissions 2015-Current (Standard Axis Call For Lever- Cable Control) Availability N/A ,117 JD 5085/5100E Series Cab 4wd TIV-B Emissions 2015-Current (Standard Axis Lever- Cable Control)- Uses Tractor Hydraulics for Lift/Tilt Functions Requires 2 Rear SCR valves on tractor N/A ,117 JD 5085/5100E Series Cab 4wd TIV-B Emissions 2015-Current (Loader Joystick- AI Valve Control) N/A ,117 REPLACEMENT LOADER JOYSTICK (Part # ) AND MOUNT PLATE (Part # ) WILL BE PROVIDED IN THIS ABOVE KIT JD 5085/5100/5115M Series Cab 4wd TIV-B Emissions 2015-Current (Standard Axis Lever- Cable Control)- Will Fit 2WD Tractors L ,117 JD 5085/5090/5100/5115M Series Cab 4wd TIV-B Emissions 2015-Current (Standard Axis Lever- Cable Control)- Uses Tractor Hydraulics for Lift/Tilt Functions Requires 2 Rear SCR valves on tractor- Will Fit 2WD Tractors L ,117 JD 5085/5090/5100/5115M Series Cab 4wd TIV-B Emissions 2015-Current (Loader Joystick-AI Valve Control)- Will Fit 2WD Tractors L ,117 REPLACEMENT LOADER JOYSTICK (Part # ) AND MOUNT PLATE (Part # ) WILL BE PROVIDED IN THIS ABOVE KIT JD 5085M/5095M/5105M Cab 4wd TIII Emissions (Standard Axis Lever- Cable Control)- Will Fit 2WD Tractors L ,117 JD 5085/5100/5115M Series Cab 4wd TIV-A Emissions (Standard Axis Lever- Cable Control)- Will Fit 2WD Tractors L ,117 JD 5085/5100/5115M Series Cab 4wd TIV-A Emissions (Loader Joystick/Loader Hydraulics)- Will Fit 2WD Tractors L ,117 JD 5085/5100/5115M Series ROPS 4wd TIV-A Emissions (Standard Axis Lever- Cable Control)- Will Fit 2WD Tractors L ,117 LIST PRICE 37

41 VERSA MOWER 60", 72", 74" Mid-Mount Rotary/Flail Mount Kit Options TRACTOR DESCRIPTION 2WD Front 4WD Front Rear John Deere (Continued) JD 6100D/6115D/6130D/6140D Cab 4wd TIII Emissions (540 PTO Pump/Fender Tank) ,117 JD 6105/6120E Series Cab 2wd TIV-B Emissions 2015-Current (Standard Axis Lever- Cable Control)- Will Fit 2WD Tractors Only N/A ,117 JD 6110/6210/6310/6405/6410 Cab 2wd (Fender Tank) ,117 JD 6110/6210/6310/6405/6410 Cab 4wd (Fender Tank) ,117 JD 6120/6220/6320/6420 (Tier II) CAB/2&4wd (Fender Tank) ,117 JD 6120/6220/6320/6420 (Tier II) CAB/2wd (Tractor Hyd/Mid-Mt Tank) N/A ,117 JD 6120/6220/6320/6420 (Tier II) CAB/4wd (Tractor Hyd/Mid-Mt Tank) N/A ,117 JD 6120/6220/6320/6420 (Tier II) ROPS/2&4wd (Fender Tank) ,117 JD 6120/6215/6220/6320/6415/6420 (Tier II) CAB 2wd (Frame Mounted Tank) ,117 JD 6120/6215/6220/6320/6415/6420 (Tier II) Cab 4wd (Frame Mounted Tank) ,117 JD 6120/6215/6220/6320/6415/6420 (Tier II) Rops 2/4wd (Frame Mounted Tank) ,117 JD 6110/6120/6130M Series Cab 4wd TIV-B Emissions 2015-Current (Standard Axis Lever- Cable Control)- Will Fit 2WD Tractors ,117 JD 6105/6115/6125M Cab 2wd TIV-A (Standard Axis Lever- Cable Control)- Will Fit 2WD Tractors Only ,117 JD 6105/6115/6125M Cab 2wd TIV-A (Tractor Loader Joystick- Loader Hydraulics)- Will Fit 2WD Tractors Only ,117 JD 6215/6415 Cab/2&4wd (Fender Tank) ,117 JD 6215/6415 Cab/4wd (Tractor Hyd-2nd Remote Req'd/Mid-Mt Tank) N/A ,117 JD 6215/6415 Cab/4wd (Tractor Hyd-2nd Remote Req'd/Mid-Mt Tank) N/A ,117 JD 6230/6330/6430 "Mid-Spec" Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 JD 6230/6330/6430 "Mid-Spec" Cab/2&4wd (Fender Tank) ,117 JD 6230/6330/6430 "Mid-Spec" Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 JD 6230/6330/6430 "Mid-Spec" ROPS/2&4wd (Fender Tank) ,117 JD 6230/6330/6430 "Premium" Cab/2&4wd (Fender Tank) ,117 JD 6230/6330/6430 "Premium" Cab/2&4wd (540 PTO Pump/Fender Tank) ,117 JD 6615/6715 Cab/2wd (Mid-Mt Tank) N/A ,117 JD 6615/6715 Cab/4wd (Mid-Mt Tank) N/A ,117 JD 7220/7320/7420/7520 Cab/2wd (Mid-Mt Tank) N/A ,117 JD 7220/7320/7420/7520 Cab/4wd (Mid-Mt Tank) N/A ,117 JD 7130/7230 "Mid" Cab/2&4wd (4 or 6 cyld/55 gal. fuel tank/fender Tank) ,117 JD 7130/7230 "Mid" Cab/2&4wd w/jd673 Loader (4 or 6 cyld/55 gal. fuel tank/fender Tank) ,117 Massey Ferguson MF 2670/2680 Cab/2wd (Under Fender Tank) L-15F N/A ,117 MF 5445/5455 Cab/2wd w/std Hood (Tier II Engine Only/Fender Tank) L-15 N/A ,117 MF 5460 ROPS/2wd w/std Hood (Tier II Engine Only/Fender Tank) N/A ,117 New Holland MOUNT KIT MAXIMUM TIRE SIZE NH T4020/4030 Cab 2 & 4wd (Tractor Hydraulic Stack Control/Fender Tank) L ,117 NH T4040/4050 "Deluxe" Cab/2&4wd (Fender Tank) L ,117 NH T4.85/4.95/4.105/4.115 Cab 4wd I-TIV Emissions (Cable Control) N/A ,117 NH T5.95/5.105/5.115 Cab 4wd I-TIV Emissions (Cable Control) N/A ,117 NH T5.95/5.105/5.115 Cab 4wd I-TIV Emissions (Tractor Hyd. Control) N/A ,117 LIST PRICE 38

42 VERSA MOWER 60", 72", 74" Mid-Mount Rotary/Flail Mount Kit Options TRACTOR DESCRIPTION MOUNT KIT MAXIMUM TIRE SIZE 2WD Front 4WD Front Rear New Holland (Continued) NH T5040/5050/5060/5070 Cab/2&4wd (Fender Tank) ,117 NH T5040/5050/5060/5070 Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 NH T5040/5050/5060/5070 ROPS/2&4wd (Fender Tank) ,117 NH T6010/6020/6040/6060 Cab/2wd (Fender Tank) N/A ,117 NH T6010/6020/6040/6060 Cab/2wd (Tractor Hyd/Fender Tank) N/A ,117 NH T6010/6020/6040/6060 Cab/4wd (Fender Tank) N/A ,117 NH T6010/6020 "Delta" ROPS/2wd (Mid-Mt Tank) N/A ,117 NH T6030/6050/6070 Cab/2&4wd (Fender Tank) ,117 NH T6030/6050/6070 Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 NH T6030/6050 ROPS/2&4wd (Fender Tank) ,117 NH TB100/110 ROPS/2wd (Mid-Mt Tank) N/A ,117 NH TB100/110 ROPS/4wd N/A ,117 NH TL80/90/100 Cab/2&4wd (Fender Tank) ,117 NH TL80/90/100 Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 NH TL80/90/100 ROPS/2wd (Mid-Mt Tank) x11-16 Air N/A 20x20 Logging 8,117 NH TL80/90/100 ROPS/4wd (Fender Tank) N/A ,117 NH TL80/90/100 ROPS/4wd (Tractor Hyd/Fender Tank) N/A ,117 NH TL80A/90A/100A Cab/2&4wd (Fender Tank) ,117 NH TL80A/90A/100A Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 NH TL80A/90A/100A ROPS/2wd (Fender Tank) N/A ,117 NH TL80A/90A/100A ROPS/4wd (Fender Tank) N/A ,117 NH TN55D/65D/70D/75D Cab/2&4wd (Fender Tank) ,117 NH TN55D/65D/70D/75D Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 NH TN55/65/70/75 ROPS/2wd (Mid-Mt Tank) N/A ,117 NH TN55/65/70/75 ROPS/4wd (Fender Tank) N/A ,117 NH TN60DA/70DA/75DA Cab/2&4wd (Fender Tank) ,117 NH TN60DA/70DA/75DA Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 NH TN60A/70A/75A ROPS/2wd (Mid-Mt Tank) N/A ,117 NH TN60A/70A/75A ROPS/4wd (Fender Tank) N/A ,117 NH TS100A/110A Cab 2wd (Mid-Mt Tank) N/A ,117 NH TS100A/110A Cab 2wd (Tractor Hyd/Mid-Mt Tank) N/A ,117 NH TS100A/110A Cab 4wd (Fender Tank) N/A ,117 NH TS100A/110A ROPS 2wd (Mid-Mt Tank) N/A ,117 NH TS115A/125A/130A/135A Cab/2&4wd (Fender Tank) ,117 NH TS115A/125A/130A/135A Cab/2&4wd (Tractor Hyd/Fender Tank) ,117 NH TS115A/125A/130A/135A ROPS/2&4wd (Fender Tank) ,117 NH TS6.110/6.120 Cab 2 & 4wd TIV-B Emissions (Cable Control) ,117 NH TS6.110/6.120 Cab 2 & 4wd (Cable Control/Fender Tank) ,117 NH TS6.110/6.120 Rops 2 & 4wd (Cable Control/Fender Tank) ,117 NH TS6.125/6.140 Cab 2 & 4wd (Cable Control/Fender Tank) ,117 NH TS6.125/6.140 Rops 2 & 4wd (Cable Control/Fender Tank) TBD ,117 NH TS6020/6030 Rops 4/2wd N/A ,117 LIST PRICE OTHER SPECIFICATIONS (1) Case-IH JX-U & Farmall U and New Holland TL-A, T4000 & T5000 series tractors require a smaller replacement battery which is not included. We recommend using Exide #34R-84N. 39

43 VERSA PRO 21'8" Flail Mower BASE UNIT SPECIFICATIONS 21'8" Overall Cutting Width 3/8" Box Fully Welded Frame 19-Gallon Reservoir with 10 Micron Filtration Tandem Piston Pumps PSI Standard (1) year limited parts and labor warranty WING MOWER SPECIFICATIONS 88" Cutting Width Two 10-Gauge Unitized Cutter Housings 1/2" Inboard & 5/16" Outboard Side Plates Replaceable Skid Shoes 4-1/2" x 5/16" Wall Cuttershaft 1-5/16" Bore Greaseable, Self-aligning Cuttershaft Bearings 53 HP Motor Belt Drive From Motor To Cuttershaft with Automatic Spring Tension 6" Adjustable Rear Roller 1/2" to 6" Cutting Height Available in Fine or Coarse-Cut Front and Rear Safety Deflectors Automatic Cut-Off Switches Wing Cylinder Capable of 45 degrees Down & 90 Up FRONT MOWER SPECS 96" Cutting Width 10-Gauge Unitized Cutter Housing 5/16" Side Plates 4-1/2" x 5/16" Wall Cuttershaft 1-5/16" Bore Greaseable, Self-aligning Cuttershaft Bearings 60 HP Gearbox 6" Adjustable Rear Roller 1/2" to 6" Cutting Height Available in Fine or Coarse-Cut Front and Rear Safety Deflectors Belt Drive From Gearbox To Cuttershaft with Automatic Spring Tension PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT VERSA PRO FLAIL BASE UNIT (One Choice Required) LIST PRICE '8" Versa Pro Flail, Fine-Cut Knives, Rev Rot, NH TV140 3,324 68, '8" Versa Pro Flail, Coarse-Cut Knives, NH TV140 3,263 69, '8" Versa Pro Flail, Fine-Cut w/ring Knives, NH TV140 3,278 69, '8" Versa Pro Flail, Extreme Service Knives, NH TV140 3,269 69, '8" Versa Pro Flail, Fine-Cut Knives, NH TV140 3,324 68,283 OPTIONS Additional Operators and Parts Manuals- Versa Pro Series Mowers Mounting Charges- Versa Pro (Labor & Oil) 5, VP Special Mower Paint ( )- Versa Pro Series Mowers 1, VP Additional 12 Month Warranty- Versa Pro Series Mowers 5,986 40

44 REAR MOUNT HYDRO 88" AND 96" 3-Point Rear Mounted Hydraulic Flail Mowers BASE UNIT SPECIFICATIONS 88" or 96" Cutting Width 10-Gauge Unitized Cutter Housing 5/16" Side Plates CAT I or CAT II Three-Point Hitch 4-1/2" x 5/16" Wall Cuttershaft 1-5/16" Bore Greaseable, Self-aligning Cuttershaft Bearings 6" Adjustable Rear Roller 1/2" to 6" Cutting Height Available in Standard Coarse-Cut and Extreme Service Knives Front and Rear Safety Deflectors Standard (1) year limited parts and labor warranty TRACTOR REQUIREMENTS Minimum Required Tractor PTO HORSEPOWER: 45 PTO HP Minimum Required Tractor Rear 3-PT Lift Capacity (SAEJ283): 2500 LBS. PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE REAR MOUNT HYDRO UNIT (One Choice Required) TBD Rear Mounted Hydro 88"- Cntr Mount- Fine Cut Knives 16, Rear Mounted Hydro 88"- Cntr Mount- Coarse Cut Knives 16, Rear Mounted Hydro 88"- Cntr Mount- Extreme Service Knives 16, Rear Mounted Hydro 96"- Cntr Mount- Fine Cut Knives 17, Rear Mounted Hydro 96"- Cntr Mount- Coarse Cut Knives 17,505 TBD Rear Mounted Hydro 96"- Cntr Mount- Extreme Service Knives 17,415 Speed Increaser Universal Speed Increaser Mount- Cassappa Type N/C OPTIONS Roller Scraper Kit- 88" Roller Scraper Kit- 96" Additional Operators and Parts Manual Dealer Setup Charges DW Special Mower Paint ( ) DW Additional 12 Month Warranty ( ) 4,645 41

45 RIGHT-HAND INTERSTATER 62", 74", 88" Flail Mowers STANDARD SPECIFICATIONS 62", 74", or 88" Cutting Widths Full-Length Welded Tubular Frame with Transport Lock 19-Gallon Reservoir with 12 Micron Filtration Piston Pump PSI 2-Spool Valve with Detent Position 1-5/16" Bore Greaseable, Self-aligning Cuttershaft Bearings Lift Cylinder Capable of 14" Vertical Lift Tilt Cylinder Capable of 45 Down & 90 Up labor warranty. 1/2" Inboard & 5/16" Outboard Side Plates Replaceable Skid Shoes 4-1/2" x 5/16" Wall Cuttershaft Automatic Cut-Off Switch 53 HP Piston Motor Belt Drive From Motor To Cuttershaft with Automatic Spring Tension 5/8" x 5" Double -Edged, Tempered Steel Blades, 360 Swing Standard (1) year limited parts and labor warranty. Standard (1) year limited parts and labor warranty PRODUCT ORDER CODE DESCRIPTION RIGHT HAND INTERSTATER BASE UNIT APPRX. WEIGHT LIST PRICE Interstater RH Flail Mower Series- 62" Single Wing (Coarse Cut- 3 oz. Knives) Sales Note: Features a new in-line lift pump design 2,650 23, Interstater RH Flail Mower Series- 62" Single Wing (Extreme Service- 4 oz. Knives) Sales Note: Features a new in-line lift pump design 2,650 23, Interstater RH Flail Mower Series- 74" Single Wing (Coarse Cut- 3 oz. Knives) Sales Note: Features a new in-line lift pump design 2,790 24, Interstater RH Flail Mower Series- 74" Single Wing (Extreme Service- 4 oz. Knives) Sales Note: Features a new in-line lift pump design 2,790 24, Interstater RH Flail Mower Series- 88" Single Wing (Coarse Cut- 3 oz. Knives) Sales Note: Features a new in-line lift pump design 2,925 24,436 Interstater RH Flail Mower Series- 88" Single Wing (Extreme Service- 4 oz. Knives) Sales Note: Features a new in-line lift pump design 2,925 24,595 Sales Note: The Alamo Industrial Interstater Series underwent design changes in All part #'s above are designed to use the new in-line lift pump design. All side wings are now equipped with clipped front foot guards. OPTIONS Additional Operators and Parts Manuals- Interstater Series Mowers Mounting Charges- RH Interstater (Labor & Oil) 5, IR Special Mower Paint ( )- Interstater RH Series Mowers Special Tractor Paint- Cab 4wd Tractors 6, I1 Additional 12 Month Warranty- Interstater Series Mowers- RH 4,666 SALES NOTE: ALL ORDERS FOR INTERSTATER UNITS REQUIRE THE PURCHASE OF A MOUNT KIT FEATURED ON NEXT PAGES 42

46 RIGHT-HAND INTERSTATER 62", 74", 88" Mount Kit Options TRACTOR DESCRIPTION Case Farmall 110/120A TIV-B Cab 2 & 4wd Series (2015- Current) RH Model- AI Standard Axis-Lever Cable Controls/AI Valve. First Cut Info: 60" Case-IH Farmall 95C Cab 4wd (RH-Single Wing- Offset 13.5") Case-IH JX1060C/1070C/1075C Cab 2wd (RH-Single Wing- Offset 5") Case-IH JX1060C/1070C/1075C Cab/2wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) Case-IH JX1060C/1070C/1075C Cab 4wd (RH-Single Wing- Offset 5") Case-IH JX1060C/1070C/1075C Rops 2wd (RH-Single Wing- Offset 5") Case-IH JX1080U/1090U/1100U Cab 2wd (RH-Single Wing- Offset 5") Case-IH JX1080U/1090U/1100U Rops 2wd (RH-Single Wing- Offset 5") Case-IH MXU100/110 Cab 4wd (RH-Single Wing- Offset 5") Case-IH MXU100/110 Rops 4wd (RH-Single Wing- Offset 5")* Case-IH MXU115/125/130/135 Cab 4wd (RH-Single Wing- Offset 5")* JD 5075M- Series Rops 4wd TIV-B (2015- Current) (RH Single Wing- Replacement Joystick Control/AI Valve) JD 5065/5075M- Series ROPS 2wd (RH-Single Wing- Offset 5") JD 5065/5075M- Series Cab 2wd (RH-Single Wing- Offset 5"/ Using Loader Joystick Control) JD 5085/5100E- Series Cab 4wd TIV-B (2015- Current) (RH-Single Wing- AI Standard Cable Control) JD 5085/5100E- Series Rops 4wd TIV-B Emissions (RH- Single Wing- AI Standard Cable Control) JD 5083/5093/5101E- Series Cab 4wd Late Tier III Ribbed Style Axle (RH-Single Wing- Offset 5") JD 5083/5093/5101E- Series Cab 4wd Early 2011 Tier II Ribbed Style Axle (RH-Single Wing- Offset 5"/ Using Loader Joystick Control) JD 5083/5093/5101E- Series Cab 4wd Late Tier III Ribbed Style Axle (RH-Single Wing- Offset 5") JD 5083/5093/5101E- Series Cab 4wd Late Tier III Ribbed Style Axle (RH-Single Wing- Offset 5"/ Using Loader Joystick Control) JD 5085/5100/5115M- Series Cab 2 & 4wd TIV-B (2015-) RH-Single Wing- Standard Cable Control MOUNT KIT MAXIMUM TIRE SIZE REAR OFFSET COMP BOX 2WD Front 4WD Front Rear Case IH John Deere " OR 18.5" 11L $ 12,151 88" Ctr 96"OR 12.5" 96"OR 12.5" 96"OR 12.5" 96"OR 12.5" 88"OR 14.5" 96" OR 12.5" 88"OR 14.5" 96" OR 12.5" 88"OR 14.5" 96" OR 12.5" 88"OR 14.5" 96" OR 12.5" LIST PRICE N/A $10, L-15 N/A $10, L-15 N/A $10,488 N/A $10,488 11L-15 N/A $10,488 11L $10, N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 11L-15 N/A $10,488 11L-15 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 Note: Please list BOTH mount kit part numbers on your order. 43

47 RIGHT-HAND INTERSTATER 62", 74", 88" Mount Kit Options TRACTOR DESCRIPTION JD 5085/5095/5105M- Series Cab 4wd (RH-Single Wing- Offset 5") JD 5085/5095/5105M- Series Cab 4wd (RH-Single Wing- Offset 5") JD 5225/5325 Cab/2wd (RH Only/Aux Pump) JD 5225/5325 Cab/4wd (RH Only/Aux Pump) JD 5420/5520 Cab 4wd (RH-Single Wing- Offset 5") JD 5420/5520 Rops 4wd (RH-Single Wing- Offset 5") JD 5425/5525 Cab 4wd (RH-Single Wing- Offset 5") JD 5425/5525 Cab 4wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) JD 5425/5525 Rops 2wd (RH-Single Wing- Offset 5") JD 6120/6220/6320/6420 Cab 4wd (RH-Single Wing- Offset 5") JD 6120/6220/6320/6420 Cab 4wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) JD 6215/6415 Cab/2&4wd (RH Only/Aux Pump) JD 6215/6415 Cab/2&4wd (RH Only/Tractor Hyd) (2nd Remote Req'd) JD 6330/6430 Mid-Spec & Premium Cab 4wd (RH-Single Wing- Offset 5") JD 6330/6430 Mid-Spec & Premium Cab 4wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) JD 6330/6430 Mid-Spec & Premium Cab 2wd (RH-Single Wing- Offset 5") JD 6330/6430 Mid-Spec & Premium Cab 2wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) JD 7130/7230 Mid-Spec Cab 4wd (RH-Single Wing- Offset 5") MF 492 Cab 4wd (RH-Single Wing- Offset 5") MF 4335/4345/4355 Cab 4wd w/ Standard Hood (RH- Single Wing- Offset 5") MF 4335/4345/4355 Cab 4wd w/ Standard Hood (RH- Single Wing- Offset 5"/ Using Tractor Hydraulics) MF 5435/5445/5455 Cab 2wd w/ Standard Hood (RH- Single Wing- Offset 5") Note: Please list BOTH mount kit part numbers on your order. MOUNT KIT MAXIMUM TIRE SIZE REAR OFFSET COMP BOX 2WD Front 4WD Front Rear John Deere Massey Ferguson LIST PRICE N/A $10,488 N/A $10, N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10, N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10, N/A $10, N/A $10,488 N/A $10,488 N/A $10,488 N/A $10,488 N/A $10, N/A $10,488 44

48 RIGHT-HAND INTERSTATER 62", 74", 88" Mount Kit Options TRACTOR DESCRIPTION MOUNT REAR OFFSET McCormick CX75/85/95/105 TII Models Cab 2wd (RH- Single Wing- Offset 5") McCormick CX75/85/95/105 TII Models Cab 4wd (RH- Single Wing- Offset 5") NH T4020/4030 "Deluxe" Cab 2wd (RH-Single Wing- Offset 5") NH T4020/4030 "Deluxe" Cab 2wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) NH T4020/4030 "Deluxe" Cab 2wd (RH-Single Wing- Offset 5"/ Using Tractor Loader Hydraulics) NH T4020/4030 "Deluxe" Cab 4wd (RH-Single Wing- Offset 5") NH T4020/4030 "Standard" Rops 2wd (RH-Single Wing- Offset 5") NH T4040/4050 "Deluxe" Cab 2wd (RH-Single Wing- Offset 5") NH T4040/4050 "Deluxe" Cab 4wd (RH-Single Wing- Offset 5") NH T5040/5050/5060/5070 Cab 2 & 4wd (RH-Single Wing- Offset 5") NH T5040/5050/5060/5070 Cab 2 & 4wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) NH T5040/5050/5060/5070 Rops 2wd (RH-Single Wing- Offset 5") NH T6030/6050/6070 Cab 2 & 4wd (RH-Single Wing- Offset 5") NH T6030/6050/6070 Cab 2 & 4wd (RH-Single Wing- Offset 5"/ Using Tractor Hydraulics) NH T6030/6050/6070 Rops 2wd (RH-Single Wing- Offset 5") NH T7030/7040/7050/7060 Cab 4wd (RH-Single Wing- Offset 5") NH TB100/110 Rops 2 & 4wd (RH-Single Wing- Offset 5") NH TL80/90/100 Cab 2wd (RH-Single Wing- Offset 5") NH TL80A/90A/100A Cab 2 & 4wd (RH-Single Wing- Offset 5") NH TL80A/90A/100A Rops 2 & 4wd (RH-Single Wing- Offset 5") McCormick KIT 2WD Front 4WD Front Rear New Holland "OR 12.5" 96"OR 12.5" 96"OR 12.5" 88"OR 14.5" 96"OR 12.5" 96"OR 12.5" 96"OR 12.5" 88"OR 14.5" 96"OR 12.5" MAXIMUM TIRE SIZE LIST PRICE 11L-16 N/A $10,488 N/A $10,488 11L-15 N/A $10,488 11L-15 N/A $10,488 11L-15 N/A $10,488 N/A $10, N/A $10, L-15 N/A $10,488 N/A $10, $10, $10, N/A $10, $10, $10, N/A $10,488 N/A $10,488 N/A $10, N/A $10, $10, $10,488 Note: Please list BOTH mount kit part numbers on your order. 45

49 RIGHT-HAND INTERSTATER 62", 74", 88" Mount Kit Options TRACTOR DESCRIPTION MOUNT REAR OFFSET NH TN60DA/70DA/75DA Cab 2wd (RH-Single Wing- Offset 8.75"/ Using Tractor Hydraulics) NH TN60DA/70DA/75DA Cab 4wd (RH-Single Wing- Offset 13.78"/ Using Tractor Hydraulics) NH TN60A/70A/75A Rops 2wd (RH-Single Wing- Offset 8.75") NH TS100A/110A Rops 2 & 4wd (RH-Single Wing- Offset 5") NH TS115A/125A/135A Cab 2 & 4wd (RH-Single Wing- Offset 5") NH TS115A/125A/135A Rops 2 & 4wd (RH-Single Wing- Offset 5") NH T4.75 Powerstar Cab 2wd TIV-B (2015-Current)- RH- Single Wing- Standard Axis-Lever Cable Controls/ AI Valve NH T4.75 Powerstar Cab 4wd TIV-B (2015-Current)- RH- Single Wing- Standard Axis-Lever Cable Controls/ AI Valve New Holland (Continued) KIT 2WD Front 4WD Front Rear "OR 12.5" 88"OR14.5" 96"OR12.5" 96"OR 12.5" 88" OR 8.5" 96" CTR 88" OR 8.5" 96" CTR MAXIMUM TIRE SIZE LIST PRICE 9.5L-15 N/A $10,488 N/A $10,488 11L-15 N/A $10, $10, $10, $10, N/A $12,151 N/A $12,151 NH T4.75 Powerstar Rops 4wd TIV-A ( )- RH- Single Wing Standard Lever Controls- Requires HD bolster code on tractor N/A $12,151 T4.90/100/110/120 TIV-B Cab 4wd Series (2015-Current) RH- Single Wing- Standard Lever Controls. T4.90/100/110/120 TIV-B Cab 4wd Series (2015-Current) RH Single Wing- Standard Axis- lever Controls/ AI Valve. T4.90/100/110/120 TIV-B Rops 4wd (2015- Current) RH- Single Wing uses Standard Axis-lever cable controls/ AI Valve with cab-style control stand. T4.85/95/105 Cab 4wd TIV-A ( ) (RH Single Wing- 5" Offset Right) Standard Lever Controls. Includes 500 lb rear wheel weight. Requires HD bolster code on tractor / / " OR 20.5" 96" OR 18.5" 88" OR 20.5" 96" OR 18.5" 88" OR 20.5" 96" OR 18.5" 88" OR 8.5" 96" CTR N/A $12,151 N/A $12,151 N/A $12,151 N/A $12,151 T4.85/95/105 TIV-A Rops 4wd Series ( ) (RH Single Wing- 5" Offset Right) Standard Lever Controls. Includes 500 lb rear wheel weight. Requires HD bolster code on tractor / " OR 8.5" 96" CTR N/A $12,151 TS6.110/120 TIV-B Cab 2 & 4wd Series (2015- Current) RH Model- AI Standard Cable Controls TS6.110/115/120 TIII Cab 2 & 4wd Series ( ) (RH Single Wing- 5" Offset Right) TS6.125/140 Cab 2 & 4wd TIII Emissions ( ) (RH Single Wing- 5" Offset Right) " OR 18.5" 11L $ 12, $10, $10,488 Note: Please list BOTH mount kit part numbers on your order. 46

50 INTERSTATER DUAL-WING 18'5", 20'9" Flail Mower BASE UNIT SPECIFICATIONS 18'5", or 20'9" Overall Cutting Widths Tilt Cylinder Capable of 45 Down & 90 Up Full-Length Welded Tubular Frame with Transport Lock 10-Gauge Unitized Cutter Housing 19-Gallon Reservoir with 12 Micron Filtration REAR MOWER SPECIFICATIONS Tandem Piston Pumps PSI 88" or 96" Cutting Width (Depending on trctr mnt. kit) 4-Spool Valve with Detent Position 10-Gauge Unitized Cutter Housing Standard (1) year limited parts and labor warranty 5/16" Side Plates WING MOWER SPECIFICATIONS CAT I or CAT II Three-Point Hitch 62", 74", or 88" Cutting Widths 4-1/2" x 5/16" Wall Cuttershaft Replaceable Skid Shoes 5/8" x 5" Double -Edged, Tempered 4-1/2" x 5/16" Wall Cuttershaft Steel Blades, 360 Swing 1-5/16" Bore Greaseable, Self-aligning Cuttershaft Bearings Standard (1) year limited parts and 53 HP Piston Motor labor warranty. Belt Drive From Motor To Cuttershaft with Automatic Spring Tension 1/2" to 6" Cutting Height 6" Adjustable Rear Roller Available in Fine or Coarse-Cut 1/2" to 6" Cutting Height Torque Limiter Clutch Available in Fine or Coarse-Cut Front and Rear Safety Deflectors Front and Rear Safety Deflectors CAT 4 Driveline Automatic Cut-Off Switch Belt Drive From Gearbox To Cuttershaft with Lift Cylinder Capable of 14" Vertical Lift Automatic Spring Tension PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT INTERSTATER BASE UNIT (One Choice Required) LIST PRICE 17' Dual Wing Coarse-Cut (3 oz. Knives) (2016-Current) Sales Note: Features a new in-line lift pump design. Consists of 2-62" wings and 1- SHD rear mower 4,840 50,719 17' Dual Wing Extreme Service (4 oz. Knives) (2016- Current) Sales Note: Features a new in-line lift pump design Consists of 2-62" wings and 1- SHD rear mower 4,840 51,097 19' Dual Wing Coarse-Cut (3 oz. Knives) (MY2016- Current) Sales Note: Features a new in-line lift pump design. Consists of 2-74" wings and 1- SHD rear mower 5,320 51,257 19' Dual Wing Extreme Service (4 oz. Knives) (2016- Current) Sales Note: Features a new in-line lift pump design Consists of 2-74" wings and 1- SHD rear mower 5,320 51,635 21' Dual Wing Coarse-Cut (3 oz. Knives) (2016- Current) Sales Note: Features a new in-line lift pump design. Consists of 2-88" wings and 1- SHD rear mower 5,590 52,066 21' Dual Wing Extreme Service (4 oz. Knives) (2016- Current) Sales Note: Features a new in-line lift pump design Consists of 2-88" wings and 1- SHD rear mower 5,590 52,441 Sales Note: The Alamo Industrial Interstater Series underwent design changes in All part #'s above are designed to use the new in-line lift pump design. All side wings are now equipped with clipped front foot guards. 47

51 INTERSTATER DUAL-WING 18'5", 20'9" Flail Mower OPTIONS Additional Operators and Parts Manuals- Interstater Series Mowers Left-Wing Remote Positioning System 65 3, Mounting Charges- DW Interstater (Labor & Oil) 8, DW Special Mower Paint ( )- Interstater DW Series Mowers 1, Special Tractor Paint- Cab 4wd Tractors 6, DW Additional 12 Month Warranty- Interstater Series Mowers- DW 5,986 NOTE: ALL ORDERS FOR INTERSTATER UNITS REQUIRE THE PURCHASE OF A MOUNT KIT TO COMPLETE AN INSTALLATION (See Next Pages) 48

52 DUAL-WING INTERSTATER 18'5", 20'9" MOUNT KIT OPTIONS TRACTOR DESCRIPTION Farmall 110 /120A TIV-B Cab 2 & 4wd Series (2015-Current) Dual Wing Model- Standard Axis-Lever Cable Controls Case Farmall 110 /120A Cab 2 & 4wd TIII Emissions (Dual Wing Model) Case Farmall 90/100/110/120C TIV-B Cab 4wd (2015- Current) Dual Wing- Standard Axis- Lever Cable Controls (28 Gallon Repl. Fuel tank included/ Uses factory DEF tank) 5085/5100/5115M TIV-B Cab 4wd Series (2015-Current) Dual Wing Model- Standard Axis-Lever Cable Controls 35 Gallon Repl. Fuel tank included/ Uses factory DEF tank MOUNT REAR MAXIMUM TIRE SIZE KIT OFFSET 2WD Front 4WD Front Rear Case IH TBD- Call For Availability John Deere LIST PRICE 112" Ctr , , " Ctr N/A , " Ctr N/A ,374 JD 5085/5100/5115M Series cab 4wd TIV-A Emissions (Dual Wing Model- AI Standard Cable Controls) JD 5083/5093/5101E Series cab 4wd TIII Emissions (Dual Wing Model- AI Standard Cable Controls) JD 5425/5525 Cab 4wd (Dual Wing Model- 5" Offset Left & Right)* JD 5425/5525 Rops 2wd w/ Straddle Platform (Dual Wing Model- 5" Offset Left & Right)* JD 6615/6715 Rops 2wd (Dual Wing Model- 5" Offset Left & Right)* JD 6120/6220/6320/6420 Cab 4wd (Dual Wing Model- 5" Offset Left & Right)* JD 6120/6220/6320/6420 Rops 2 & 4wd (Dual Wing Model- 5" Offset Left & Right)* JD 6330/6430 "Mid-Spec" Cab 4wd (Dual Wing Model- 5" Offset Left & Right)* JD 6330/6430 "Mid-Spec" Cab 2wd (Dual Wing Model- 5" Offset Left & Right)* JD 6330/6430 "Mid-Spec" ROPS 4wd (Dual Wing Model- 5" Offset Left & Right)* JD 7130/7230 "Mid-Spec" Cab 4wd (Dual Wing Model- 10" Offset Left)* JD 7130/7230 "Mid-Spec" Cab 2wd (Dual Wing Model- 5" Offset Left)* N/A ,298 N/A ,298 N/A , N/A ,298 96" OL 5" N/A ,298 N/A , ,298 N/A , N/A ,298 N/A ,298 N/A ,298 N/A ,298 Note that ALL part numbers listed must be included with your order. 49

53 DUAL-WING INTERSTATER 18'5", 20'9" MOUNT KIT OPTIONS TRACTOR DESCRIPTION T4.90/100/110/120 TIV-B Cab 4wd (2015-Current) Dual Wing- Standard Axis-Lever Cable Controls (28 Gallon Repl. Fuel tank included/ Uses factory DEF tank) NH T5040/5050/5060/5070 Cab 2 & 4wd (Dual Wing Model- 5" Offset Left & Right)* (27 gal repl fuel tank included) NH T5040/5050/5060/5070 Rops 2wd (Dual Wing Model- 5" Offset Left & Right) (27 gal repl fuel tank included) NH T6010/6020/6040/6060 Cab 2wd (Dual Wing Model- 5" Offset Left & Right) (51 gal repl fuel tank & exhaust pipe included) NH T6010/6020/6040/6060 Cab 4wd (Dual Wing Model- 5" Offset Left & Right/Using Tractor Hydraulics) (51 gal repl fuel tank & exhaust pipe included) NH T6010/6020/6040/6060 Cab 4wd (Dual Wing Model- 5" Offset Left & Right) (51 gal repl fuel tank & exhaust pipe included) NH T6030/6050 Cab 2wd (Dual Wing Model- 5" Offset Left & Right)* (51 gal repl fuel tank & exhaust pipe included) NH T6030/6050 Cab 4wd (Dual Wing Model- 5" Offset Left & Right)* (51 gal repl fuel tank & exhaust pipe included) NH T6030/6050 Cab 4wd w/ Large Tires (Dual Wing Model- 5" Offset Left & Right)* (51 gal repl fuel tank & exhaust pipe included) MOUNT REAR MAXIMUM TIRE SIZE KIT OFFSET 2WD Front 4WD Front Rear New Holland LIST PRICE 112" OR 8.5" N/A , , N/A , N/A ,298 N/A ,298 N/A , N/A ,298 N/A ,298 N/A ,298 NH TB100/110 Rops 2wd (Dual Wing Model- 5" Offset Left & Right)* NH TL80/90/100 Cab 2wd (Dual Wing Model- 5" Offset Left & Right)* (27 gal repl fuel tank included) NH TL80/90/100 ROPS 2wd (Dual Wing Model- 5" Offset Left & Right)* (27 gal repl fuel tank included) NH TL80A/90A/100A Cab 2 & 4wd (Dual Wing Model- 5" Offset Left & Right)* (27 gal repl fuel tank included) NH TL80A/90A/100A ROPS 2wd (Dual Wing Model- 5" Offset Left & Right) (27 gal repl fuel tank included) NH TM115/125/135/150 Cab 2wd (Dual Wing Model- 10" Offset Left)* N/A , N/A , N/A , , N/A ,298 96' OL 5" N/A ,298 Note that ALL part numbers listed must be included with your order. 50

54 DUAL-WING INTERSTATER 18'5", 20'9" MOUNT KIT OPTIONS TRACTOR DESCRIPTION MOUNT REAR MAXIMUM TIRE SIZE KIT OFFSET 2WD Front 4WD Front Rear New Holland LIST PRICE NH TM120/130/140/155 Cab 2wd (Dual Wing Model- 10" Offset Left)* NH TS115A/125A/130A/135A Cab/2&4wd (Dual Wing Model- 5" Offset Left & Right)* (51 gal repl fuel tank & exhaust pipe included) NH TS115A/125A/130A/135A Cab 2 & 4wd (Dual Wing Model- 5" Offset Left & Right/Using Tractor Hyd)* (51 gal repl fuel tank & exhaust pipe included) (Tractor must have four rear remotes) NH TS115A/125A/130A/135A Rops 2 & 4wd (Dual Wing Model- 5" Offset Left & Right)* (51 gal repl fuel tank & exhaust pipe included) NH TS6.110/6.120 Cab 4wd TIV-B Emissions 2015-Current (Dual Wing Model- AI Standard Cable Controls) NH TS6.110/6.120 Cab 2wd TIV-B Emissions 2015-Current (Dual Wing Model- AI Standard Cable Controls) NH TS6.110/6.120 Cab 2 & 4wd TIII Emissions (Dual Wing Model- AI Standard Cable Controls) NH TS6.110/6.120 Rops 2 & 4wd TIII Emissions (Dual Wing Model- AI Standard Cable Controls) NH TS6.130/6.145 Cab 2 & 4wd TIV-B Emissions 2015-Current (Dual Wing Model- AI Standard Cable Controls) NH TS6.125/6.140 Cab 2 & 4wd TIII Emissions (Dual Wing Model- AI Standard Cable Controls) TBD- Call For Availability TBD- Call For Availability TBD- Call For Availability ' OL 5" N/A ,298 N/A ,298 N/A , , " Ctr N/A , " Ctr N/A , , , " Ctr , ,298 Note that ALL part numbers listed must be included with your order. 51

55 REAR INTERSTATER 88" Flail Mower STANDARD SPECIFICATIONS 88" Cutting Width 60 HP Gearbox 10-Gauge Unitized Cutter Housing 6" Adjustable Rear Roller 5/16" Side Plates 1/2" to 6" Cutting Height CAT I or CAT II Three-Point Hitch Available in Fine or Coarse-Cut 4-1/2" x 5/16" Wall Cuttershaft Torque Limiter Clutch 1-5/16" Bore Greaseable, Self-aligning Cuttershaft Bearings 5/8" x 5" Double -Edged, Tempered Belt Drive From Gearbox to Cuttershaft with Automatic Spring Tension Steel Blades, 360 Swing Standard (1) year limited parts and labor warranty Standard (1) year limited parts and labor warranty. labor warranty. PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE 88" REAR SHD BASE UNIT (One Choice Required) SHD88CTRFC 88" SHD Center Mount (Fine Cut Knives) 1,035 8,346 SHD88CTRCC 88" SHD Center Mount (Course Cut- 3oz Knives) 1,035 8,346 SHD88CTRES 88" SHD Center Mount (Extreme Service- 4 oz Knives) 1,035 8,633 SHD88085FC 88" SHD Offset 8.5" Right (Fine Cut Knives) 1,035 8,346 SHD88085CC 88" SHD Offset 8.5" Right (Course Cut- 3oz Knives) 1,035 8,346 SHD88085ES 88" SHD Offset 8.5" Right (Extreme Service- 4 oz Knives) 1,035 8,633 SHD88145FC 88" SHD Offset 14.5" Right (Fine Cut Knives) 1,035 8,346 SHD88145CC 88" SHD Offset 14.5" Right (Course Cut- 3oz Knives) 1,035 8,346 SHD88145ES 88" SHD Offset 14.5" Right (Extreme Service- 4 oz Knives) 1,035 8,633 SHD88205FC 88" SHD Offset 20.5" Right (Fine Cut Knives) 1,035 8,346 SHD88205CC 88" SHD Offset 20.5" Right (Course Cut- 3oz Knives) 1,035 8,346 SHD88265CC 88" SHD Offset 26.5" Right (Course Cut- 3oz Knives) 1,035 8,346 SHD88265FC 88" SHD Offset 26.5" Right (Fine Cut Knives) 1,035 8,346 SHD88265CC 88" SHD Offset 26.5" Right (Course Cut- 3oz Knives) 1,035 8,346 SHD88265ES 88" SHD Offset 26.5" Right (Extreme Service- 4 oz Knives) 1,035 8,633 OPTIONS Additional Operators and Parts Manuals- SHD Series Rear Mowers Lift Chain- 9 links, 29/32" Hole Clevis- Sold Individually- Requires 1 for offset units and two for centered units- SHD Rear Mower Series Special Mower Paint- SHD Series Rear Mowers I2 Additional 12 Month Warranty- Interstater Series Mowers- SHD Series 1,991 52

56 REAR INTERSTATER 96" Flail Mower STANDARD SPECIFICATIONS 96" Cutting Width 10-Gauge Unitized Cutter Housing 5/16" Side Plates CAT I or CAT II Three-Point Hitch 4-1/2" x 5/16" Wall Cuttershaft 1-5/16" Bore Greaseable, Self-aligning Cuttershaft Bearings Belt Drive From Gearbox to Cuttershaft with Automatic Spring Tension Standard (1) year limited parts and labor warranty labor warranty. 60 HP Gearbox 6" Adjustable Rear Roller 1/2" to 6" Cutting Height Available in Fine or Coarse-Cut Torque Limiter Clutch 5/8" x 5" Double -Edged, Tempered Steel Blades, 360 Swing Standard (1) year limited parts and labor warranty. PRODUCT ORDER CODE DESCRIPTION APPRX. WEIGHT LIST PRICE 96" REAR SHD BASE UNIT (One Choice Required) SHD96CTRFC 96" SHD Center Mount (Fine Cut Knives) 1,170 9,295 SHD96CTRCC 96" SHD Center Mount (Course Cut- 3 oz. knives) 1,170 9,295 SHD96CTRES 96" SHD Center Mount (Extreme Service- 4 oz. knives) 1,170 9,609 SHD96125FC 96" SHD Offset 12.5" Right (Fine Cut Knives) 1,170 9,295 SHD96125CC 96" SHD Offset 12.5" Right (Course Cut 3 oz. knives) 1,170 9,295 SHD96125ES 96" SHD Offset 12.5" Right (Extreme Service 4 oz. knives) 1,170 9,609 SHD96185FC 96" SHD Offset 18.5" Right (Fine Cut Knives) 1,170 9,295 SHD96185CC 96" SHD Offset 18.5" Right (Course Cut 3 oz. knives 1,170 9,295 SHD96185ES 96" SHD Offset 18.5" Right (Extreme Service 4 oz. knives) 1,170 9,609 SHD96245CC 96" SHD Offset 24.5" Right (Course Cut 3 oz. knives) 1,170 9,295 SHD96245ES 96" SHD Offset 24.5" Right (Extreme Service 4 oz. knives) 1,170 9,609 SHD96305CC 96" SHD Offset 30.5" Right (Course Cut 3 oz. knives) 1,170 9,295 SHD96305ES 96" SHD Offset 30.5" Right (Extreme Service 4 oz. knives) 1,170 9,609 OPTIONS Additional Operators and Parts Manuals- SHD Series Rear Mowers 62 Lift Chain- 9 links, 29/32" Hole Clevis- Sold Individually- Requires 1 for offset units and two for centered units- SHD Rear Mower Series Special Mower Paint- SHD Series Rear Mowers I2 Additional 12 Month Warranty- Interstater Series Mowers- SHD Series 1,991 53

57 1502 East Walnut St. Seguin, TX Sales & Marketing fax Warranty Registration/Claims Return Authorizations Online Part Orders Technical Information fax 54

58 WHOLEGOODS PRICING Universal Line Pricing Effective April 1,

59 Universal Line Price Book Section Table of Contents Switchblade Switchblade- Mount Kits 74" Super Heavy Duty (SHD)- Flail Mowers 88" Super Heavy Duty (SHD)- Flail Mowers 96" Super Heavy Duty (SHD)- Flail Mowers 112" Super Heavy Duty (SHD)- Flail Mowers RX- Standard Duty Lift -Type Rotary Mowers RX- Standard Duty Pull -Type Rotary Mowers RX- Heavy Duty Series Lift -Type Rotary Mowers Eagle Mechanical Flex Wing Mowers Exten-A-Kut II Rotary Mowers Grass King Flail Mowers McConnel Power Arm (PA) McConnel Power Arm (PRO) 56

60 SWITCHBLADE 5', 6' Sickle Bar Mower STANDARD SPECIFICATIONS Full Hydraulic Drive of Cutter Knife Hydraulically Actuated Breakaway Hydraulic Lift and Tilt Knife Speed Governor 3" Heavy Duty Industrial Rock Guards Reversible Hydraulic Motor Safety Transport Locks Self-Contained Hydraulics Cutting Capacity: 1/2" diameter material Tractor Req: Min. 3,000 lbs. and a 25 HP rating PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE SWITCHBLADE BASE UNIT (One Choice Required) Switchblade Series- 5' RH w/ Serrated Knives , Switchblade Series- 6' RH w/ Serrated Knives ,607 MOUNT KIT See Mount Kit Pages for Descriptions and Part Numbers OPTIONS Additional Operators and Parts Manuals- SWB Series (Hard Cop Additional Operators, Parts & Service Manuals- SWB Series (CD Knife Holder Brackets (Order Quantity 2 per Unit) Pump Guard Kits- All Part #'s Pump Guards- Sales Note: Refer To Alamo Industrial W/G Menuu for current SWB Series part #'s Factory Mounting Charges- SWB Series- Includes Labor & Oil 2, Special Mower Paint- SWB Series Additional 12 Month Warranty- SWB Series 2,175 SALES NOTE: ALL ORDERS FOR SWITCHBLADE UNITS REQUIRE THE PURCHASE OF A MOUNT KIT TO COMPLETE AN INSTALLATION (See Next Pages) 57

61 SWITCHBLADE 5', 6' MOUNT KIT OPTIONS TRACTOR DESCRIPTION Case-IH Tractors SUBFRAME HYDRAULIC MAX. TIRE SIZE LIST KIT KIT FRONT REAR PRICE Case Farmall 75C Series Cab 2wd Only ( TIV-B Models) Sales Note: Standard Axis Cable/Alamo Valve Controls Requires Replacement Battery Exide # 34R-84N ( ) L ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" Case Farmall 85/95/105U Series Cab 4wd ( ) (HD Bolster Code Only) Sales Note: For Tractors Manufactured after TIV-A Models Only Requires Replacement Battery Exide # 34R-84N ( ) ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR14.5" or SHD96 OR12.5" Case-IH JX1060C/1070C/1075C Cab/2&4wd ,219 Case-IH JX1080U/1090U/1100U ROPS/2&4wd ,219 Case-IH JX1080U/1090U/1100U Cab/2&4wd ,219 John Deere Tractors John Deere 5085/5100/5115M Cab 2 & 4wd (TIV-B Models ) Sales Note: Alamo Hydraulics w/ Loader Joystick Handle included ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" John Deere 5085/5100/5115M Cab 2 & 4wd (TIV-B Models ) Sales Note: Standard Axis Levers w/ Alamo Hydraulic Controls ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" John Deere 5085/5100/5115M Rops 2 & 4wd (TIV-B Models ) Sales Note: Alamo Hydraulics w/ Loader Joystick Handle included ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" John Deere 5065M/5075M Cab 4wd (TIV-B Models ) Sales Note: Alamo Hydraulics w/ Loader Joystick Handle included ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" John Deere 5065M/5075M Rops 2wd Only (TIV-B Models ) Sales Note: Standard Axis Levers w/ Alamo Hydraulic Controls L ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" John Deere 5085/5100E Cab 2 & 4wd (TIV-B Models ) Sales Note: Alamo Hydraulics w/ Loader Joystick Handle included ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" John Deere 5085/5100E Cab 2 & 4wd (TIV-B Models ) Sales Note: Standard Cable Controls CALL CALL ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" John Deere 5045/5055/5065/5075E Cab 2 & 4wd (TIV-B Models ) Sales Note: Standard Axis Lever w/ AI Valve Controls. This kit ill not fit with factory installed loader mid-valve ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR14.5" or SHD96 OR12.5" John Deere 5045/5055/5065/5075E Rops 2wd Only (TIV-B Models ) Sales Note: Standard Axis Lever w/ AI Valve Controls. This kit ill not fit with factory installed loader mid-valve ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR14.5" or SHD96 OR12.5" John Deere 5045/5055/5065/5075E Rops - 4wd (TIV-B Models ) Sales Note: Standard Axis Lever w/ AI Valve Controls. This kit ill not fit with factory installed loader mid-valve ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR14.5" or SHD96 OR12.5" 58

62 SWITCHBLADE 5', 6' MOUNT KIT OPTIONS TRACTOR DESCRIPTION SUBFRAME HYDRAULIC MAX. TIRE SIZE LIST KIT KIT FRONT REAR PRICE John Deere 5065M/5075M ROPS 2 & 4wd (TIII Models ) ,219 John Deere 5065M/5075M Cab 2 & 4wd (TIII Models ) ,219 John Deere 5083/5093/5101 E- Series Cab 4wd ,219 John Deere 5085/5100/5115- M Series Cab 2/4wd ,219 John Deere 5085/5100/5115- M Series Cab 2/4wd ,219 John Deere 5105/5205 ROPS/2&4wd ,219 John Deere 5220/5320 ROPS/2wd (Straddle Platform) ,219 John Deere 5220/5320 Cab/2wd ,219 John Deere 5225/5325 ROPS/2&4wd ,219 John Deere 5225/5325 Cab/2&4wd ,219 John Deere 5425/5525 ROPS/2&4wd (IOOS Platform) ,219 John Deere 5425/5525/5603/5625 Cab/2&4wd ,219 John Deere 5425/5525/5603/5625 Cab/2&4wd w/jd Loader ,219 New Holland Tractors New Holland T4.90/4.100/4.110/4.120 Series Cab 4wd ( TIV-B Models) Sales Note: Standard Axis Cable/Alamo Valve Controls Requires Replacement Battery Exide # 34R-84N ( ) Call Call 9.5L ,219 Above Kits Can Use The Following Rear Mowers: Call New Holland T4.75 (Powerstar) Series Cab 2wd Only ( TIV-B Models) Sales Note: Standard Axis Cable/Alamo Valve Controls Requires Replacement Battery Exide # 34R-84N ( ) L ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR20.5" or SHD96 OR12.5" New Holland T4.75 (Powerstar) Series Cab 4wd ( TIV-B Models) Sales Note: Standard Axis Cable/Alamo Valve Controls Requires Replacement Battery Exide # 34R-84N ( ) Call Call 9.5L ,219 Above Kits Can Use The Following Rear Mowers: Call New Holland T4.85/4.95/4.105 Cab 4wd (HD Bolster Code Only) (For Tractors Manufactured after TIV-A Models Only) Sales Note: Standard Axis Cable/Alamo Valve Controls Requires Replacement Battery Exide # 34R-84N ( ) ,219 Above Kits Can Use The Following Rear Mowers: SHD88 OR14.5" or SHD96 OR12.5" New Holland T4020/4030 ROPS/2&4wd ,219 New Holland T4020/4030 Cab/2&4wd ,219 New Holland T5040/5050/5060/5070 Cab/2&4wd ,219 New Holland TL80A/90A/100A ROPS/2&4wd ,219 New Holland TL80A/90A/100A Cab/2&4wd ,219 New Holland TN60A/70A/75A ROPS/2&4wd ,219 New Holland TN60DA/70DA/75DA Cab/2&4wd ,219 New Holland TN85A/95A ROPS/2&4wd ,219 OTHER SPECIFICATIONS 1) Tractors should not be ordered with mid-mount loader valves as they may interfere with the subframe structure. 2) New Holland models require a smaller replacement battery. We recommend Exide #34R-84N (Alamo # ). 3) The John Deere 5105/5205 will require a modification to the front bolster for proper driveline clearance. 59

63 SUPER HEAVY DUTY 74" Flail Mower STANDARD SPECIFICATIONS 74" Cutting Width 10-Gauge Unitized Cutter Housing 5/16" Side Plates 4-1/2" x 5/16" Wall Cuttershaft 1-15/16" Bore Greaseable, Self Aligning Cuttershaft Bearings Belt Drive from Gearbox to Cuttershaft with Automatic Spring Tension 6" Adjustable Rear Roller Cutting Capacity: 1" Diameter Grass Material Factory Set-Up 60 HP Gearbox CAT 4 Driveline Torque Limiter Clutch Front & Rear Deflectors Available in Fine or Coarse-Cut 1/2" - 6" Cutting Height Tractor Req: Min 35 HP CAT I or CAT II Three-Point Hitch PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE 74" SHD FLAIL BASE UNIT (One Choice Required) SHD74CTRFC 74" SHD, Center Mount (Fine Cut) 930 8,230 SHD74CTRCC 74" SHD, Center Mount (Course Cut- 3 oz. knives) 930 8,230 SHD74CTRES 74" SHD, Center Mount (Extreme Service- 4 oz. knives) 930 8,471 SHD74080FC 74" SHD, Offset 8" Right (Fine Cut) 930 8,230 SHD74080CC 74" SHD, Offset 8" Right (Course Cut- 3 oz. knives) 930 8,230 SHD74080ES 74" SHD, Offset 8" Right (Extreme Service- 4 oz. knives) 930 8,471 SHD74140FC 74" SHD, Offset 14" Right (Fine Cut) 930 8,230 SHD74140CC 74" SHD, Offset 14" Right (Course Cut- 3 oz. knives) 930 8,230 SHD74140ES 74" SHD, Offset 14" Right (Extreme Service- 4 oz. knives) 930 8,471 74" SHD FLAIL BASE UNIT FOR USE WITH CASTER WHEELS (One Choice Required) SHD74CTRFCCB 74" SHD, Center Mount, Caster Brackets (Fine Cut) 974 8,885 SHD74CTRCCCB 74" SHD, Center Mount, Caster Brackets (Course Cut- 3 oz. knives) 974 8,885 SHD74CTRESCB 74" SHD, Center Mount, Caster Brackets (Extreme Service- 4 oz. knives) 974 9,125 SHD74080FCCB 74" SHD, Offset 8" Right, Caster Brackets (Fine Cut) 974 8,885 SHD74080CCCB 74" SHD, Offset 8" Right, Caster Brackets (Course Cut- 3 oz. knives) 974 8,885 SHD74080ESCB 74" SHD, Offset 8" Right, Caster Brackets (Extreme Service- 4 oz. knives) 974 9,125 SHD74140FCCB 74" SHD, Offset 14" Right, Caster Brackets (Fine Cut) 974 8,885 SHD74140CCCB 74" SHD, Offset 14" Right, Caster Brackets (Course Cut- 3 oz. knives) 974 8,885 SHD74140ESCB 74" SHD, Offset 14" Right, Caster Brackets (Extreme Service- 4 oz. knives) 974 9,125 CASTERS (One Choice Required) Laminated Caster Wheel w/ Roller 154 1, Pneumatic Caster Wheel w/ Roller 86 1,482 OPTIONS Lift Chain (1 Required for offset units; 2 Required for Centered Units) SHD Dealer Mounting-/Setup Fee- SHD Series Additional 12 Month Warranty- SHD Series 2, Special Mower Paint- SHD

64 SUPER HEAVY DUTY 88" Flail Mower STANDARD SPECIFICATIONS 88" Cutting Width 10-Gauge Unitized Cutter Housing 5/16" Side Plates 4-1/2" x 5/16" Wall Cuttershaft 1-15/16" Bore Greaseable, Self Aligning Cuttershaft Bearings Belt Drive from Gearbox to Cuttershaft with Automatic Spring Tension 6" Adjustable Rear Roller Cutting Capacity: 1" Diameter Grass Material Factory Set-Up 60 HP Gearbox CAT 4 Driveline Torque Limiter Clutch Front & Rear Deflectors Available in Fine or Coarse-Cut 1/2" - 6" Cutting Height Tractor Req: Min 35 HP CAT I or CAT II Three-Point Hitch PRODUCT ORDER CODE DESCRIPTION 88" SHD FLAIL BASE UNIT (One Choice Required, Continued Next Page) APPROX. WEIGHT LIST PRICE SHD88CTRFC 88" SHD, Center Mount (Fine Cut) ,346 SHD88CTRCC 88" SHD, Center Mount (Course Cut- 3 oz. knives) ,346 SHD88CTRES 88" SHD, Center Mount (Extreme Service- 4 oz. knives) ,633 SHD88085FC 88" SHD, Offset 8.5" Right (Fine Cut) ,346 SHD88085CC 88" SHD, Offset 8.5" Right (Course Cut- 3 oz. knives) ,346 SHD88085ES 88" SHD, Offset 8.5" Right (Extreme Service- 4 oz. knives) ,633 SHD88145FC 88" SHD, Offset 14.5" Right (Fine Cut) ,346 SHD88145CC 88" SHD, Offset 14.5" Right (Course Cut- 3 oz. knives) ,346 SHD88145ES 88" SHD, Offset 14.5" Right (Extreme Service- 4 oz. knives) ,633 SHD88205FC 88" SHD, Offset 20.5" Right (Fine Cut) ,346 SHD88205CC 88" SHD, Offset 20.5" Right (Course Cut- 3 oz. knives) ,346 SHD88205ES 88" SHD, Offset 20.5" Right (Extreme Service- 4 oz. knives) ,633 SHD88265FC 88" SHD, Offset 26.5" Right (Fine Cut) ,346 SHD88265CC 88" SHD, Offset 26.5" Right (Course Cut- 3 oz. knives) ,346 SHD88265ES 88" SHD, Offset 26.5" Right (Extreme Service- 4 oz. knives) ,633 SHD88CTRFCCB 88" SHD, Center Mount, Caster Brackets (Fine Cut) ,292 SHD88CTRCCCB 88" SHD, Center Mount, Caster Brackets (Course Cut- 3 oz. knives) ,292 SHD88CTRESCB 88" SHD, Center Mount, Caster Brackets (Extreme Service- 4 oz. knives) ,578 SHD88085FCCB 88" SHD, Offset 8.5" Right, Caster Brackets (Fine Cut) ,292 SHD88085CCCB 88" SHD, Offset 8.5" Right, Caster Brackets (Course Cut- 3 oz. knives) ,292 SHD88085ESCB 88" SHD, Offset 8.5" Right, Caster Brackets (Extreme Service- 4 oz. knives) ,578 SHD88145FCCB 88" SHD, Offset 14.5" Right, Caster Brackets (Fine Cut) ,292 SHD88145CCCB 88" SHD, Offset 14.5" Right, Caster Brackets (Course Cut- 3 oz. knives) ,292 SHD88145ESCB 88" SHD, Offset 14.5" Right, Caster Brackets (Extreme Service- 4 oz. knives) ,578 PRICING CONTINUED ON NEXT PAGE 61

65 SUPER HEAVY DUTY 88" Flail Mower PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE 88" SHD FLAIL BASE UNIT FOR USE WITH CASTER WHEELS (One Choice Required) SHD88205FCCB 88" SHD, Offset 20.5" Right, Caster Brackets (Fine Cut) ,292 SHD88205CCCB 88" SHD, Offset 20.5" Right, Caster Brackets (Course Cut- 3 oz. knives) ,292 SHD88205ESCB 88" SHD, Offset 20.5" Right, Caster Brackets (Extreme Service- 4 oz. knives) ,578 SHD88265CCCB 88" SHD, Offset 26.5" Right, Caster Brackets (Course Cut- 3 oz. knives) ,292 SHD88265ESCB 88" SHD, Offset 26.5" Right, Caster Brackets (Extreme Service- 4 oz. knives) ,578 CASTERS (One Choice Required) Laminated Caster Wheel w/ Roller 154 1, Pneumatic Caster Wheel w/ Roller 86 1,482 OPTIONS Lift Chain (1 Required for offset units; 2 Required for Centered Units) Additional Operators and Parts Manual SHD Dealer Mounting-/Setup Fee- SHD Series Additional 12 Month Warranty- SHD Series 2, Special Mower Paint- SHD

66 SUPER HEAVY DUTY 96" 3-Point Mount Flail Mower STANDARD SPECIFICATIONS 96" Cutting Width 10-Gauge Unitized Cutter Housing 5/16" Side Plates 4-1/2" x 5/16" Wall Cuttershaft 1-15/16" Bore Greaseable, Self Aligning Cuttershaft Bearings Belt Drive from Gearbox to Cuttershaft with Automatic Spring Tension 6" Adjustable Rear Roller Cutting Capacity: 1" Diameter Grass Material Factory Set-Up Available in Fine or Coarse-Cut 60 HP Gearbox CAT 4 Driveline Torque Limiter Clutch Front & Rear Deflectors Available in Fine or Coarse-Cut 1/2" - 6" Cutting Height Tractor Req: Min 45 HP CAT I or CAT II Three-Point Hitch PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE 96" SHD FLAIL BASE UNIT (One Choice Required) SHD96CTRFC 96" SHD, Center Mount (Fine Cut) ,295 SHD96CTRCC 96" SHD, Center Mount (Course Cut- 3 oz. knives) ,295 SHD96CTRES 96" SHD, Center Mount (Extreme Service- 4 oz. knives) ,609 SHD96125FC 96" SHD, Offset 12.5" Right (Fine Cut) ,295 SHD96125CC 96" SHD, Offset 12.5" Right (Course Cut- 3 oz. knives) ,295 SHD96125ES 96" SHD, Offset 12.5" Right (Extreme Service- 4 oz. knives) ,609 SHD96185FC 96" SHD, Offset 18.5" Right (Fine Cut) ,295 SHD96185CC 96" SHD, Offset 18.5" Right (Course Cut- 3 oz. knives) ,295 SHD96185ES 96" SHD, Offset 18.5" Right (Extreme Service- 4 oz. knives) ,609 SHD96245CC 96" SHD, Offset 24.5" Right (Course Cut- 3 oz. knives) ,295 SHD96245ES 96" SHD, Offset 24.5" Right (Extreme Service- 4 oz. knives) ,609 SHD96305CC 96" SHD, Offset 30.5" Right (Course Cut- 3 oz. knives) ,295 SHD96305ES 96" SHD, Offset 30.5" Right (Extreme Service- 4 oz. knives) ,609 88" SHD FLAIL BASE UNIT FOR USE WITH CASTER WHEELS (One Choice Required) SHD96CTRFCCB 96" SHD, Center Mount, Caster Brackets (Fine Cut) ,923 SHD96CTRCCCB 96" SHD, Center Mount, Caster Brackets (Course Cut- 3 oz. knives) ,923 SHD96CTRESCB 96" SHD, Center Mount, Caster Brackets (Extreme Service- 4 oz. knives) ,236 SHD96125CCCB 96" SHD, Offset 12.5" Right, Caster Brackets (Course Cut 3 oz. knives) ,923 SHD96125ESCB 96" SHD, Offset 18.5" Right, Caster Brackets (Extreme Service- 4 oz. knives) ,236 SHD96245CCCB 96" SHD, Offset 24.5" Right, Caster Brackets (Course Cut- 3 oz. knives) ,923 SHD96245ESCB 96" SHD, Offset 24.5" Right, Caster Brackets (Extreme Service- 4 oz. knives) ,236 63

67 SUPER HEAVY DUTY 96" 3-Point Mount Flail Mower PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE 88" SHD FLAIL BASE UNIT FOR USE WITH CASTER WHEELS (One Choice Required) SHD96305CCCB 96" SHD, Offset 30.5" Right, Caster Brackets (Course Cut- 3 oz. knives) ,923 SHD96305ESCB 96" SHD, Offset 30.5" Right, Caster Brackets (Extreme Service- 4 oz. knives) ,236 CASTERS (One Choice Required) Laminated Caster Wheel w/ Roller 154 1, Pneumatic Caster Wheel w/ Roller 86 1,482 OPTIONS Lift Chain (1 Required for offset units; 2 Required for Centered Units) Additional Operators and Parts Manual SHD Dealer Mounting-/Setup Fee- SHD Series Additional 12 Month Warranty- SHD Series 2, Special Mower Paint- SHD

68 SUPER HEAVY DUTY 112" 3-Point Mount Flail Mower STANDARD SPECIFICATIONS 112" Cutting Width 10-Gauge Unitized Cutter Housing 5/16" Side Plates 4-1/2" x 5/16" Wall Cuttershaft 1-15/16" Bore Greaseable, Self Aligning Cuttershaft Bearings Belt Drive from Gearbox to Cuttershaft with Automatic Spring Tension 6" Adjustable Rear Roller Cutting Capacity: 1" Diameter Grass Material Factory Set-Up Available in Fine or Coarse-Cut 60 HP Gearbox CAT 4 Driveline Torque Limiter Clutch Front & Rear Deflectors Available in Fine or Coarse-Cut 1/2" - 6" Cutting Height Tractor Req: Min 65 HP CAT II Three-Point Hitch PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE 112" SHD FLAIL BASE UNIT (One Choice Required) SHD112CTRFC 112" SHD, Center Mount (Fine Cut) ,448 SHD112CTRCC 112" SHD, Center Mount (Course Cut- 3 oz. knives) ,448 SHD112CTRES 112" SHD, Center Mount (Extreme Service- 4 oz. knives) ,761 65

69 RX- HEAVY DUTY 60", 72", 84", 96" Lift -Type Rotary Mower STANDARD SPECIFICATIONS RX60 Models- 60" Cutting Width RX72 Models- 72" Cutting Width RX84 Models- 84" Cutting Width RX96 Models- 96" Cutting Width All models- 540 PTO Type RX60 Models- CAT I Three-Point Hitch RX72/RX84/RX96 Models- CAT II Three-Point Hitch RX60/RX72 Models- 110 HP Gearbox RX 84 Models- 120 HP Gearbox RX96 Models- 120 HP Center Power Divider HP Gearboxes CAT 4 Shielded Drivelines Slip Clutch Protection Pan Blade Carrier w/ Updraft Blades 360 Swivel Tailwheel Rated For 2" Brush Front & Rear Double Chainguards 10-Gauge Rolled Top Deck 1/4" x 9" Side Skirts Continuous Weld Deck to Skirt Seam PRODUCT ORDER CODE RX RX RX RX DESCRIPTION NOTE: SOME ASSEMBLY IS REQUIRED ON ALL RX UNITS RX60 BASE UNIT APPROX. WEIGHT LIST PRICE RX60 Lift- Type 540 PTO Model (Round Pan, Single Tail Wheel, w/double Chain Guards) ,358 RX72 Lift- Type 540 PTO Model (Round Pan, Single Tail Wheel, w/double Chain Guards) ,899 RX84 Lift- Type 540 PTO Model (Round Pan, Single Tail Wheel, w/double Chain Guards) 1,381 6,441 RX84 Lift-Type 540 PTO Model (Round Pan, Dual Tail Wheel, w/double Chain Guards) 1,479 6,933 RX96 Lift-Type 540 PTO (Round Pan, Dual Tail Wheel, w/double Chain Guards) ,004 OPTIONS 3570 Check Chain Kit (Contains a Set of 2 Chains) (CAT I) M Check Chain Kit (Contains a Set of 2 Chains) (CAT II) Offset Adapter Kit (15 3/4 in Offset)- RX84 & RX96 Units only 240 3,335 8B208 Additional Operators Manual- RX 60/72/84 Series 62 8B184 Additional Operators Manual- RX 96 Models RX Dealer Mounting/Setup Charges- RX Series Additional 12 Month Warranty- RX Series 1, Special Mower Paint- RX60 Units Special Mower Paint- RX72 Units Special Mower Paint- RX84 Units Special Mower Paint- RX

70 RX- HEAVY DUTY 84", 96" Pull-Type Rotary Mowers STANDARD SPECIFICATIONS RX84-84" Cutting Width RX96-96" Cutting Width Designed for 540 RPM PTO applications 10-Gauge Top Deck Pan Blade Carriers w/ Updraft Type Blades 4" Blade Overlap Replaceable Skid Shoes Front & Rear Double Chainguards RX HP Gearbox RX HP Center Power Divider - 110HP Outer Gearboxes Parking Jack Safety Tow Chain Pull-Type Design 1/4" x 9" Side Skirts CAT 4 Shielded Driveline Slip Clutch Protection PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE NOTE: SOME ASSEMBLY IS REQUIRED ON ALL RX UNITS RX96 PULL-TYPE BASE UNIT (Less Wheels) RX RX84 Pull-Type 540 PTO (Round Pan, Hyd Cyl & Hose Kit, Dual Tail Wheel, w/double Chain Guards) , RX96 Pull-Type 540 PTO (Round Pan, Hyd Cyl & Hose Kit, Dual Tail Wheel, w/double Chain Guards) ,440 WHEEL & TIRE OPTIONS (One Choice Required) Two Laminated Tires & Wheels Two Used Airplane Tires & Wheels Two 15" Wheels (Wheels Only) Two Implement Tires & Wheels OPTIONS Spring Shock Absorber- RX84 & RX96 Units only Stroke Control- RX84 & RX96 Units only B184 Additional Operators Manual- RX 96 Models RX Dealer Mounting/Setup Charges- RX Series Additional 12 Month Warranty- RX Series 1, Special Mower Paint- RX84 Units Special Mower Paint- RX

71 RX- SUPER HEAVY DUTY 72" Lift-Type Rotary Mower STANDARD SPECIFICATIONS 72" Cutting Width 540 PTO CAT I or II Three-Point Hitch Pan Blade Carrier Slip Clutch Protection 7-gauge top deck Continuous Weld Deck to Skirt Seam Front & Rear Double Chainguards Tractor PTO HP Required HP Gearbox CAT 5 Shielded Drivelines 360 Swivel Tailwheel Rated For 4" Brush PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE NOTE: SOME ASSEMBLY IS REQUIRED ON ALL RX UNITS RX72HD BASE UNIT RXHD1072 RX72HD Lift- Type 540 PTO Model (Round Pan, Single Tail Wheel, w/double Chain Guards) ,466 OPTIONS 3570 Check Chain Kit (Contains a Set of 2 Chains) (CAT I) B209 Additional Operators Manual- RX72HD Models RX Dealer Mounting/Setup Charges- RX Series Additional 12 Month Warranty- RX Series 1, Special Mower Paint- RX72 Units

72 EAGLE MECHANICAL 10', 15' Flex-Wing Rotary Mower Standard Specifications All Models: 540 PTO Only Safety Tow Chain: Standard Cutting Width: Eagle 10' Models: 126" Eagle 15' Models: 180" Output Shaft Diameter: 2-3/8" Overall Width: Eagle 10' Models: 133" Eagle 15' Models: 186" Blade Tip Speed: Center 16,286 FPM Overall Length: Eagle 10' Models: 183" Eagle 15' Models: 183" Wing 16,415 FPM Transport Width: Eagle 10' Models: 88" Eagle 15' Models: 96" Cutting Capacity: 3-1/2" Grass Material Cutting Height Range: 1-1/2" Min. to 14-1/2" Max Driveline Size: Main - Cat 5 Self-Leveling Height Adjustment: Hydraulic Cylinder Constant Velocity Blade Carrier: Reinforced Pan w/ Updraft Style Blades Wing - Cat 5 Standard Blades: 1/2" Thick x 4" Wide Gearbox Rating: * (Ratings based on actual field performance) Driveline Protection: Slip Clutch Deck Thickness: 7 gauge Power Divider HP Center & Wing HP Side Skirt: 1/4" x 10-1/2" Wing Flex Degrees: 90 up, 22 down Blade Overlap: 6" Jack Stand: Standard Required Horsepower: 50 Weight: Eagle 10' Models: Approximately 3,850 lbs. PRODUCT ORDER CODE Eagle 15' Models: Approximately 5,435 lbs. DESCRIPTION Tires & Wheel: Foam-filled used airplane Wing Lift Hydraulics: Standard Double Chainguards Mower Warranty: One year limited Gearbox Warranty: 5 year limited Hitch: Drawbar- Pull-Type Unit APPROX. WEIGHT LIST PRICE Eagle 10' Flex-Wing 540 PTO Model ( Deck Rings, w/ 5 Foam Filled Airplane Tires) ,656 Eagle 15' Flex-Wing 540 PTO Model ( Deck Rings, w/ 6 Foam Filled Airplane Tires) ,768 NOTE: TRACTOR MUST BE EQUIPPED WITH 2 OR MORE REAR REMOTES FOR PROPER OPERATION OPTIONS Winch & Stand Ball Hitch (2-5/16" Ball) Pintle Hitch Kit (Requires Tractor Drawbar Modification) Single Auxillary Spindle Kit (Requires 1 Additional Tire and Wheel) Dual Auxillary Spindle Kit (Requires 2 Additional Tires and Wheels) Set of Heavy Duty Updraft Blades (5/8" Thick x 4" Wide)- 15' Eagle Model Set of Heavy Duty Updraft Blades (5/8" Thick x 4" Wide)- 10' Eagle Model C Additional Operators Manual- Eagle Series P Additional Parts Manual- Eagle Series EGL Dealer Mounting/Setup Charges- Eagle Series Additional 12 Month Warranty- Eagle Series Special Mower Paint- Eagle 15 Models (Call before quoting) Special Mower Paint- Eagle 10 Models (Call before quoting) 1010 WHEEL & TIRE PRICING- OPTIONAL SELECTIONS (SELECT FROM ONE GROUP OF TIRES) (5 OR 6 REQUIRED) " Wheel- Rim only (5 Hole Pattern) 18 each Laminated Tire & Wheel 75 each Implement Tire & Wheel 40 each Used Airplane Tire & Wheel (Not Foam Filled) 78 each Foam-Filled Used Airplane Tire & Wheel (27 x 7.75x 15) 78 each Set of 6- Part # Foam-Filled Used Airplane Tire & Wheel (27 x 7.75 x 15) - Standard in base pricing

73 EXTEN-A-KUT II Rear-Mount Offset Rotary Mower STANDARD SPECIFICATIONS 60" Cutting Width CAT II Three-Point Hitch 60-Gallon Hydraulic Reservoir 12'6" Maximum Reach from Right Side of Tractor 180 Head Tilt 79 HP Hydraulic Pump Attached to a Speed Increaser 10-Gauge Deck with Boxed Channel Frame 81 HP Hydraulic Motor Directly Splined to Spindle 2" Spindle in a Unibody Cast Housing Bar Blade Carrier 1/2" x 4" Updraft Blades Front & Rear Double Chainguards PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE EXTEN-A-KUT II BASE UNIT (One Choice Required) Exten-A-Kut II, 540 PTO, Bar Blade Carrier , Exten-A-Kut II, 540 PTO, Pan Blade Carrier ,954 FRONT GUARD (One Choice Required) Double Chain Guard 58 In Base Price REAR GUARD (One Choice Required) Double Chain Guard 58 In Base Price OPTIONS Additional Operators and Parts Manual Tail Wheel Kit (Ser.# & Up) Cable & Clamp Kit EKII Dealer Mounting/Setup Charges- EKII Series 1, Additional 12 Month Warranty- EKII Series 1, Special Mower Paint- EKII Series

74 GRASS KING 62" & 74" Offset Flail Mowers STANDARD SPECIFICATIONS 6"x8"x3/16" Welded Rectangular Tube Frame 360 degree Rotating Rear Caster Wheel CAT I or CAT II Three-Point Hitch 50 to 90 Horsepower Tractor Required Hydraulic Piston Pump 4000 PSI CAT 4 Driveline 1 to 4 Speed Increaser 14 Gallon Hydraulic Reservoir 12 Micron Filtration System 10 Gauge Unitized Cutter Housing 62" or 74" Cutting Widths 1/2" Inboard & 5/16" Outboard End Plates Replaceable Skid Shoes 4-1/2" x 5/16" Bore, Greasable, Self-Aligning Cuttershaft Bearings Belt Drive from Motor to Cuttershaft with Automatic Spring Tension 74 HP Motor 6" Adjustable Rear Roller Front & Rear Deflectors Available in Fine or Coarse-Cut 1/2" - 6" Cutting Height Cutting Capacity: 1" diameter material Tractor Req: Min HP range PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE GRASS KING FLAIL BASE UNIT (One Choice Required) Grass King 62" Flail Mower , Grass King 62" Flail Mower w/ Extreme Service- 4 oz.knives , Grass King 74" Flail Mower , Grass King 74" Flail Mower w/ Extreme Service- 4 oz.knives ,037 LIFT PIN OPTIONS (One Choice Required) Lift Pin Kit (CAT I) 8 N/C Lift Pin Kit (CAT II) 8 N/C OPTIONS Additional Operators and Parts Manual GK Check Chains (CAT I) MGK Check Chains (CAT II) Parking Jack (3,000 lb / Side Wind) GK Dealer Mounting/Setup Charges- GK Series 1, Additional 12 Month Warranty- GK Series Special Mower Paint- GK Series

75 MCCONNEL PA REAR-MOUNT BOOM Articulated Rear-Mount Models STANDARD SPECIFICATIONS All Models Feature Welded Tubular Frame Design Reservoir Capacity: PA4330- CAT I or CAT II Three-Point Hitch PA Gallon PA4745/48- CAT II Three-Point Hitch PA Gallon All Models Feature Self-Contained Hydraulics PA48-47 Gallon Machine Weight With Flail & Oil: PA4330-1,409 lbs/pa4745: 2,151 lbs/ PA48: 2,750 lbs Output Horsepower: Boom Reach: PA hp (1" Cutting Capacity) PA4330- Up-16'8", Out-13'8" PA hp (2" Cutting Capacity) PA4745- Up-16'0", Out-14'0" PA48- Up-16'5", Out-15'0" Minimum Tractor Requirements*: PA4330- Tractor Weight of 4,010 lbs & 45 PTO hp PA4745- Tractor Weight of 5,512 lbs & 50 PTO hp PA48- Tractor Weight of 6,614 lbs & 60 PTO hp * Sales Note: Units are shipped without hydraulic oil. * This product line is not recommended for Kubota tractors. PA48-54 hp (2" Cutting Capacity) PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE PA POWER ARM BOOMS Tractors with CAT I or CAT II, three-point hitch, 540 PTO shaft, 45 PTO hp minimum* Note: Front counterweight may be required BASE UNIT PA 4330 Rear-Mount RH Boom Assembly (Cable-operated/ w Lift float) ,907 MOWER HEADS PA " Flail Head Assy.- 1.0m Supercut w/ Universal Knives 418 8, PA " Flail Head Assy.- 1.2m Supercut w/ "Duck" Knives ,513 PA4745/48- POWER ARM BOOMS Tractors with CAT II, three-point hitch, 540 PTO shaft, 60 Eng HP minimum* Note: Front counterweight may be required. BASE UNIT PA4745 Rear-Mount RH Boom (Cable-operated/ w Lift float) , PA48M Rear-Mount RH Boom Mower (Mid-Cut) (Cable-operated/ w Lift float) ,296 MOWER HEADS PA " Flail Head Assy.- 1.2m Supercut Flail w/ F91 "Competition" Knives 660 9, PA48 47" Flail Head Assy.- 1.2m Multicut w/competition Knives , PA 4745/48 48" Rotary Head Assy. w/flaps 600 9,171 UNIVERSAL SAFETY SCREENS (One Choice Required) Universal Safety Screen Kit- Cab Tractors N/C Universal Safety Screen Kit- Rops Tractors N/C OPTIONS PA 4330 Additional Operators Manual PA 4745 Additional Operators Manual PA 48 Additional Operators Manual PA Dealer Mounting/Setup Fee- PA Booms 1, Additional 12 Month Warranty- PA Series Booms 1,400 72

76 MCCONNEL PRO SERIES REAR-MOUNT BOOM Articulated Rear-Mount VFR Models F.O.B. Seguin, TX STANDARD SPECIFICATIONS Ƈ Reservoir Capacity: Ƈ All Models Feature Welded Tubular Frame Design Ƈ 5-point Axle Mounting Bracketry For Maximum Stability PA Gallon Ƈ All Models Feature Self-Contained Hydraulics Ƈ All Models Feature Joystick Control PA Gallon Ƈ Boom Reach: Ƈ Output Horsepower: PA5570- Up-22'0", Out-18'1" PA hp (2" Cutting Capacity) PA6570- Up-24'7", Out-21'4" PA hp (2" Cutting Capacity) Ƈ Minimum Tractor Requirements*: PA5570- Tractor Weight of 8,150 lbs & 100 hp PA6570- Tractor Weight of 9,920 lbs & 100 hp * Sales Note: Units are shipped with hydraulic oil. PRODUCT ORDER CODE DESCRIPTION APPROX. WEIGHT LIST PRICE SALES NOTES: For All McConnel Pro Series Booms- Tractors Must Be Equipped With A 1000 RPM PTO Front counterweights may be required depending on tractor size PA70 PRO SERIES - VFR POWER ARM BOOMS PA 5570 VFR- 18' Rear-Mounted Boom Package, RH, Evolution Joystick Controller, Gear System, Subframe & Axle Brackets PA 6570 VFR- 21' Rear-Mounted Boom Package, RH, Revolution Joystick Controller, Gear System, Subframe & Axle Brackets ,839 37,823 Mower Heads PA 6585 VFR-T- 21' 1.2m m (47") Grass Flail Head w/universal Boot Knives (2" Cutting Capacity) TBD 8,013 9,584 TBD 1.2m (47") Heavy Duty Flail Head w/omega Knives (4" Cutting Capacity) ADDITIONAL TRACTOR AXLE BRACKETS (Prices Below Are For Additional Sets; One Set Is Included In Base Package Price) Axle Brackets- John Deere 6M Series Cab Tractors OPTIONS Polycarbonate Door/ Side Window Kits- Contact Sales Rep For Tractor Specific POLYKIT-BOOM Kit Part #' s PAPRO Dealer Mounting/Setup Fee- PA Booms TBD Additional 12 Month Warranty- PA Series Booms ,565 2,206 3,188 3,438 73

77 1502 East Walnut St. Seguin, TX Sales & Marketing fax Warranty Registration/Claims Return Authorizations Online Part Orders Technical Information fax 74

DELIVERY STARTING POINT. Price Per Loaded Mile. Minimum Delivery Charge

DELIVERY STARTING POINT. Price Per Loaded Mile. Minimum Delivery Charge SEQ. #416-1216 MINNESOTA PRICING PAGES (Typed Responses Required) December 2016 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State,

More information

Shakopee, MN or Price per loaded mile

Shakopee, MN or Price per loaded mile SEQ. #416-713 MINNESOTA PRICING PAGES (Typed Responses Required) AUGUST 2014 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State,

More information

ALAMO INDUSTRIAL Specifications Versa Series, 17 Mid-Mount Articulated Boom

ALAMO INDUSTRIAL Specifications Versa Series, 17 Mid-Mount Articulated Boom ALAMO INDUSTRIAL Specifications Versa Series, 17 Mid-Mount Articulated Boom It is the purpose of this specification to describe a mid-mounted, articulated, hydraulically powered boom mower for cutting

More information

WHOLEGOODS PRICING Universal Line Effective Febraury 11, 2012

WHOLEGOODS PRICING Universal Line Effective Febraury 11, 2012 WHOLEGOODS PRICING Universal Line Effective Febraury 11, 2012 Table of Contents Switchblade Sickle Bar...1 Switchblade Mount Kit Options...2 Super Heavy-Duty Flail SHD 74...3 SHD 88...5 SHD 96...7 Grass

More information

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments SEQ. #416-1217 MINNESOTA PRICING PAGES Titan Machinery Teamco December 2017 Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Vendor Name: Titan Machinery Inc Contact Person: Brenden

More information

TRACTOR: INDUSTRIAL LOADER UNIT INFO

TRACTOR: INDUSTRIAL LOADER UNIT INFO INFORMATION PAGE 570NEP TRACTOR: INDUSTRIAL LOADER UNIT INFO Vendor Name: Titan Machinery Inc Contact Person: Brenden Honebrink Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo,

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725417 April, 2017 STATE OF MINNESOTA PRICING PAGE FIXED PRICE (Typed Responses Required) 1 of 6 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: Minnesota Equipment Contact Person: Dan Scharber

More information

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments SEQ. #416-1217 MINNESOTA PRICING PAGES (Typed Responses Required) December 2017 Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Vendor Name: Contact Person: Street Address: P.O.

More information

Price Per Loaded Mile:

Price Per Loaded Mile: SEQ. #416-612 MINNESOTA PRICING PAGES (Typed Responses Required) JUNE, 2012 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address:

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725-1112 November, 2012 (Typed Responses Required) 1 of 3 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: SCHARBER & SONS Contact Person: JOHN BRAUNSHAUSEN Street Address: 13725 MAIN ST P.O.

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725-417 Price quote for: (Typed Responses Required) MUNICIPAL UTILITY TRACTOR 1 of 10 Vendor Name: Contact Person: Scott Reierson Street Address: 333 2nd Street NE P.O. Box: City, State, Zip Hopkins,

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) 1 of 7 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: ABM Equipment & Supply, LLC. Contact Person: Scott Reierson Street Address: 333 2nd Street NE P.O. Box: City, State, Zip Hopkins, MN 55343

More information

Shakopee, MN or Price per loaded mile

Shakopee, MN or Price per loaded mile SEQ. #416713 MINNESOTA PRICING PAGES (Typed Responses Required) AUGUST 2014 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State,

More information

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments SEQ. #416-1217 MINNESOTA PRICING PAGES (Typed Responses Required) Contract Expires Feb-28-2019 Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Truck Utilities, MN, 55109 (See Special Terms and

More information

Municipal Utility Tractor

Municipal Utility Tractor Price quote for: PRICE PAGE METHOD # 1: FIXED PRICE BASE UNIT (Typed Responses Required) Municipal Utility Tractor 1 of 3 Vendor Name: ABM EQUIPMENT & SUPPLY, LLC. Contact Person: SCOTT REIERSON Street

More information

Dealer. Loaders, Implements and Options. January 1, 2017

Dealer. Loaders, Implements and Options. January 1, 2017 Dealer Loaders, Implements and Options January 1, 2017 Table Of Contents HOW TO USE THE PRICE LIST QUICKE DIMENSION SERIES LOADER SPECIFICATIONS QUICKE DIMENSION SERIES LOADER PRICING & DESCRIPTION QUICKE

More information

Loaders, Implements and Options

Loaders, Implements and Options Loaders, Implements and Options Table Of Contents HOW TO USE THE PRICE LIST QUICKE DIMENSION SERIES LOADER SPECIFICATIONS QUICKE DIMENSION SERIES LOADER PRICING & DESCRIPTION QUICKE DIMENSION SERIES LOADER

More information

CREATING MOWING SOLUTIONS

CREATING MOWING SOLUTIONS CREATING MOWING SOLUTIONS 2017 Creating Mowing Solutions About US Mower US Mower Mowing Solutions US Mower Rotary and Flail Mowers for Excavator and Skid Steers are used by commercial mowers for industrial

More information

TRACTOR: LOADER-BACKHOE UNIT INFO

TRACTOR: LOADER-BACKHOE UNIT INFO TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Titan Machinery Inc. Contact Person: Fred Senger & Andy Bethel Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo,

More information

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments SEQ. #46-27 MINNESOTA PRICING PAGES Titan Machinery Pronovost December 207 Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Vendor Name: Titan Machinery Inc Contact Person: Brenden

More information

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments SEQ. #416-1217 MINNESOTA PRICING PAGES Titan Machinery M-B Companies December 2017 Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Vendor Name: Titan Machinery Inc Contact Person:

More information

ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS - January, 2015

ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS - January, 2015 Price quote for: ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS - January, 2015 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Titan Machinery

More information

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5) ** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. ** SWIFT Vendor Numbers: Provide

More information

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5) ** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. ** SWIFT Vendor Numbers: Provide

More information

Rep Price List. Loaders, Implements and Options

Rep Price List. Loaders, Implements and Options Rep Price List Loaders, Implements and Options January 1, 2014 Table Of Contents HOW TO USE THE PRICE LIST QUICKE DIMENSION SERIES LOADER SPECIFICATIONS QUICKE DIMENSION SERIES LOADER PRICING & DESCRIPTION

More information

8.0 MANUFACTURER: Bush Hog. 9.0 ATTACHMENT DESCRIPTION: Construct/Landscape Tillage 10.0 WARRANTY TERM (Months/Years): 1 Year

8.0 MANUFACTURER: Bush Hog. 9.0 ATTACHMENT DESCRIPTION: Construct/Landscape Tillage 10.0 WARRANTY TERM (Months/Years): 1 Year SEQ. #416-1118 Price quote for: MINNESOTA PRICING PAGES (Typed Responses Required) Attchment C AFTERMARKET TRACTOR, SKIDSTEER & WHEEL LOADER ATTACHMENTS November, 2018 Vendor Name: Trueman Welters Contact

More information

Price Per Loaded Mile:

Price Per Loaded Mile: SEQ. #416-612 MINNESOTA PRICING PAGES (Typed Responses Required) JUNE, 2012 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address:

More information

MINNESOTA PRICING PAGES (Typed Responses Required) (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City

MINNESOTA PRICING PAGES (Typed Responses Required) (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City SEQ. #46-25 MINNESOTA PRICING PAGES (Typed Responses Required) December 205 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State,

More information

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone 15 FT. FLEX WING ROTARY MOWER - PTO DRIVEN (Specification #17) Base Unit Price ALAMO INDUSTRIAL 2018

More information

Version of Excel used: Spec # Information Requested Answer

Version of Excel used: Spec # Information Requested Answer PLEASE PURCHAS Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Seth Strehler 1600 Highway 55 East Buffalo, Mn 55313 763-682-2200 763-682-6141

More information

Aftermarket Tractor/Skidsteer Attachments

Aftermarket Tractor/Skidsteer Attachments SEQ. #416-713 MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells JULY, 2013 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free

More information

VERSA Published 04/03 Effective Serial No through Current PartNo P

VERSA Published 04/03 Effective Serial No through Current PartNo P VERSA Published 0/03 Effective Serial No. 000 through Current PartNo.02897300P MANUAL ALAMO INDUSTRIAL 502 E. Walnut Seguin, Texas 7855 830-372-355 TO THE OWNER/OPERATOR/DEALER All implements with moving

More information

Product Marketing Bulletin

Product Marketing Bulletin Product Marketing Bulletin MF4700 Series Date: Bulletin: Subject: Distribution: March 16, 2017 MF17-22PMB Massey Ferguson 4707 vs New Holland T4.75 Massey Ferguson Dealers Drawing on over a century s worth

More information

TRACTOR: LOADER-BACKHOE

TRACTOR: LOADER-BACKHOE Price quote for: TRACTOR: LOADER-BACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company Jesse Miller 12500 Dupont

More information

STATE OF MINNESOTA Pricing Page (Typed Responses Preferred)

STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) SEQ. #430-916 (Turf Maintenance Equipment) STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) Page 1 of 9 Vendor Name: Turfwerks Contact Person: Rob Sirfus Street Address: 1710 Alexander Rd P.O.

More information

Introduction INTRODUCTION

Introduction INTRODUCTION Date: Bulletin: Subject: Distribution: (Updated) April, 2013 MF13-10PMB Competitive Bulletin: Massey Ferguson 4600 Series vs John Deere 5E Series Massey Ferguson Tractor Dealers TABLE OF CONTENTS Introduction

More information

Missouri Department of Transportation 2014 RENEWAL Bid Tabulation of Request RJ Mowers

Missouri Department of Transportation 2014 RENEWAL Bid Tabulation of Request RJ Mowers 2014 RENEWAL Bid Tabulation of Request 3-121024RJ Mowers Item #1 - Slope Mower Alamo Industrial Alamo Traxx RF $79,758.00 $5,883.00 30-60 days Tiger Corporation Tiger Prowler $67,070.00 2.5% of Net Price

More information

STATE OF MINNESOTA PRICING PAGE (Typed responses preferred)

STATE OF MINNESOTA PRICING PAGE (Typed responses preferred) Spec: #425-712 T-708(5) Tractors, Garden STATE OF MINNESOTA PRICING PAGE (Typed responses preferred) July, 2012 Vendor Name: Deere & Company Contact Person: Tamara Hebert Street Address: 2000 John Deere

More information

Price Per Loaded Mile:

Price Per Loaded Mile: SEQ. #416-612 MINNESOTA PRICING PAGES (Typed Responses Required) JUNE, 2012 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address:

More information

PARTS MANUAL. 17, 21 & 24 Boom. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

PARTS MANUAL. 17, 21 & 24 Boom. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 17, 21 & 24 Boom Rev 08-14 PARTS MANUAL Part No. 02968915P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-372-9595 An Operator's Manual was shipped with the equipment in the Manual Canister. This

More information

Crawler Dozer. STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) SEQ # (October 2011) Price quote for:

Crawler Dozer. STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) SEQ # (October 2011) Price quote for: Price quote for: Crawler Dozer Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Titan Machinery Inc Andy Bethel 6340 County Road 101 E

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725-1112 November, 2012 (Typed Responses Required) 1 of 3 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: Contact Person: TIM COMMERS Street Address: 2909 E FRANKLIN AVE P.O. Box: City, State,

More information

Dealer. Loaders, Implements and Options

Dealer. Loaders, Implements and Options Dealer Loaders, Implements and Options July 1, 2017 Table Of Contents HOW TO USE THE PRICE LIST QUICKE DIMENSION SERIES LOADER SPECIFICATIONS QUICKE DIMENSION SERIES LOADER PRICING & DESCRIPTION QUICKE

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725-1214 (Typed Responses Required) 1 of 7 FIXED PRICE BASE UNIT Vendor Name: MacQueen Equipment Contact Person: Dan Gage Street Address: 595 Aldine Street P.O. Box: City, State, Zip St. Paul, MN

More information

PARTS MANUAL. Boom Arm Mower. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

PARTS MANUAL. Boom Arm Mower. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Boom Arm Mower Rev 01-19 PARTS MANUAL Part No. 02988075P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-372-9595 An Operator's Manual was shipped with the equipment in the Manual Canister. This

More information

Soucy Track Select List

Soucy Track Select List John Deere Case IH New Holland Fendt Massey Ferguson Challenger Valtra & Kubota Cat, Claas & Deutz-Fahr UTV, all models Last Update: July 11 2018 JOHN DEERE SOUCY TRACK MODELS OEM MODELS AVAILABLE EXCEPTIONS

More information

TRACTOR: LOADER-BACKHOE

TRACTOR: LOADER-BACKHOE Price quote for: TRACTOR: LOADER-BACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company Jesse Miller 12500 Dupont

More information

SERIES TRACTORS FARMALL UTILITY C SERIES TRACTORS

SERIES TRACTORS FARMALL UTILITY C SERIES TRACTORS SERIES TRACTORS FARMALL UTILITY C SERIES TRACTORS FARMALL UTILITY C 2 FARMALL UTILITY C SERIES TRACTORS 6 Models 64 117 HP * 50 100 PTO HP * READY TO WORK AS HARD AS YOU. Since 1923, the Farmall tractor

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush Chipper File: C796- Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat, Inc Nick Kentros

More information

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone SMALL AGRICULTURE TYPE TRACTOR (4 WHEEL DRIVE) (Specification #21) Base Unit Price Glade & Grove Supply

More information

JOHN DEERE COMMERCIAL PRODUCTS ADVANTAGE COMPACT UTILITY TRACTORS 3005 Tractor Equipment for Base Machine

JOHN DEERE COMMERCIAL PRODUCTS ADVANTAGE COMPACT UTILITY TRACTORS 3005 Tractor Equipment for Base Machine 3005 Tractor Equipment for Base Machine ENGINE: Yanmar Three Cylinder Liquid Cooled Diesel Engine Interim Tier IV EPA Emmissions Certified Engine HP 27.5 (20.2kW)** PTO HP 23.5 (17.5kW) Rated Speed 2700

More information

PART'S MANUAL. Boom Arm. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

PART'S MANUAL. Boom Arm. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Rev 08-11 PART'S MANUAL Boom Arm Part No.02988075P An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine

More information

AUGUST JOHN DEERE PRODUCT NEWS TRACTORS HAND BRAKE LININGS

AUGUST JOHN DEERE PRODUCT NEWS TRACTORS HAND BRAKE LININGS AUGUST PRODUCT S JOHN DEERE 20mm Min 550mm - Max 760mm 25.4mm 58788 Top Link John Deere Cat 1 Cat 2 58888 Gauge RPM John Deere 820 830 920 1020 1030 1120 1130 1630 2020 2030 2120 2130 OE Ref: AL30800 HAND

More information

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone AGRICULTURE TYPE TRACTOR WITH BOOM MOWER (4 WHEEL DRIVE) (Specification #23) Base Unit Price Glade

More information

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES

FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone 15 FT. FLEX WING ROTARY MOWER - PTO DRIVEN (Specification #17) Base Unit Price ALAMO INDUSTRIAL 2018

More information

BOOM MOWERS EXTEND, EXPAND, EXCEED YOUR REACH.

BOOM MOWERS EXTEND, EXPAND, EXCEED YOUR REACH. BOOM MOWERS EXTEND, EXPAND, EXCEED YOUR REACH. REACH FOR A DIAMOND. At Diamond Mowers, we believe that no task should be beyond your grasp. Our Boom Mowers are available in a variety of lengths and cutting

More information

PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Boom

PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Boom Boom Rev 06-18 PARTS MANUAL Part No. 02986950P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-372-9595 An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's

More information

Soucy Track Select List

Soucy Track Select List John Deere Case IH New Holland Fendt Massey Ferguson Challenger Valtra & Kubota Cat, Claas & Deutz-Fahr UTV, all models Last Update: JOHN DEERE SOUCY TRACK MODELS OEM MODELS AVAILABLE EXCEPTIONS / UNAVAILABLE

More information

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) SEQ # 727-417 Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) April, 2017 quote for: TRACTOR: SKID STEERS AND OEM ATTACHMENTS Vendor Name:

More information

JOHN DEERE COMMERCIAL PRODUCTS COMPACT UTILITY TRACTORS (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine

JOHN DEERE COMMERCIAL PRODUCTS COMPACT UTILITY TRACTORS (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine ENGINE: Yanmar 3 Cylinder Liquid Cooled Diesel Engine Tier IV EPA Emmissions Certified Engine HP 24.2 (17.8 kw), PS PTO

More information

VERSA Boom Arm Mower - Flail Mower Rotary Cutter

VERSA Boom Arm Mower - Flail Mower Rotary Cutter VERSA Boom Arm Mower - Flail Mower Rotary Cutter Rev 0-11 PART'S MANUAL Part No. 02897300P An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral

More information

MINNESOTA PRICING PAGES (Typed Responses Required) (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City

MINNESOTA PRICING PAGES (Typed Responses Required) (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City SEQ. #416-1215 MINNESOTA PRICING PAGES (Typed Responses Required) December 2015 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State,

More information

3500 Hydraulic Angle ( HP) 7900 High Lift Hydraulic Angle & Tilt ( HP) Quick-Attach D-Lock Mounting. 46/5700 Hydraulic Angle ( HP)

3500 Hydraulic Angle ( HP) 7900 High Lift Hydraulic Angle & Tilt ( HP) Quick-Attach D-Lock Mounting. 46/5700 Hydraulic Angle ( HP) Degelman Industries pioneered the perfect balance of engineered toughness and intelligent design. The result is outstanding equipment that exceeds expectations and outperforms. We achieve this through

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 17,468 lb Engine Make & Model

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 17,468 lb Engine Make & Model Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Titan Machinery Inc. Andy Bethel 6340 County Road 101 E Shakopee, MN 55379 952-445-0365

More information

TRAILER OR SKID MOUNT AIR COMPRESSOR

TRAILER OR SKID MOUNT AIR COMPRESSOR 1 of 18 Price quote for: TRAILER OR SKID MOUNT AIR COMPRESSOR Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: ABM Equipment & Supply,

More information

PARTS MANUAL. 17, 21 & 24 Boom. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas

PARTS MANUAL. 17, 21 & 24 Boom. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 17, 21 & 24 Boom Rev 07-18 PARTS MANUAL Part No. 02968915P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-372-9595 An Operator's Manual was shipped with the equipment in the Manual Canister. This

More information

TRACTOR: LOADER-BACKHOE UNIT INFO

TRACTOR: LOADER-BACKHOE UNIT INFO TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Jon Ferris 1600 Hwy 55

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

$2.50 PER MILE (See Special Terms and Conditions - No Flat Rate Allowed)

$2.50 PER MILE (See Special Terms and Conditions - No Flat Rate Allowed) SEQ. #430-916 (Turf Maintenance Equipment) STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) Page 1 of 1 Vendor Name: NIEBUR TRACTOR & EQUIPMENT, INC Contact Person: DAN BEISSEL Street Address:

More information

STATE OF MINNESOTA Pricing Page (Typed Responses Preferred)

STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) SEQ. #430-916 (Turf Maintenance Equipment) STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) Page 1 of 5 Vendor Name: Turfwerks Contact Person: Rob Sirfus Street Address: 1710 Alexander Rd P.O.

More information

Price quote for: Aftermarket Tractor/Skidsteer Attachments

Price quote for: Aftermarket Tractor/Skidsteer Attachments SEQ. #416-713 MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells JULY, 2013 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free

More information

BOOM ARM MOWER PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc.

BOOM ARM MOWER PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc. Rev 04-09 Effective S/N 01108 - Current BOOM ARM MOWER Part No. 02968915P PARTS MANUAL ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 210-372-3551 2008 Alamo Group Inc. TO THE OWNER/OPERATOR/DEALER

More information

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR 1. PRINT FIRMLY. 2. REMOVE WHITE COPY FOR CUSTOMER RECORDS. 3. REMOVE YELLOW

More information

T1.0 T1.1 T1.2 T1.3 T1.4 T1.5 T1.6 T1.7 T1.8 T1.9 T1.10 T1.11 T1.12 T1.13 T1.14 T2.0 T2.1

T1.0 T1.1 T1.2 T1.3 T1.4 T1.5 T1.6 T1.7 T1.8 T1.9 T1.10 T1.11 T1.12 T1.13 T1.14 T2.0 T2.1 T1.0 T1.1 T1.2 T1.3 T1.4 T1.5 T1.6 T1.7 T1.8 T1.9 T1.10 T1.11 T1.12 T1.13 T1.14 T2.0 T2.1 T2.2 T2.3 T2.4 T2.5 T3.0 T3.1 T3.2 T3.3 T4.0 T4.1 T4.2 T4.3 T4.4 T5.0 T5.1 T5.2 T6.0 T6.1 T6.2 T6.3 T6.4 T6.5 T7.0

More information

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Aftermarket Tractor,Skidsteer & Wheel Loader Attachments SEQ. #416-1217 MINNESOTA PRICING PAGES (Typed Responses Required) December 2017 Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Vendor Name: Contact Person: Street Address: P.O.

More information

10 Ft Flex Wing New*Roadside Cutters

10 Ft Flex Wing New*Roadside Cutters Bush Hog TOUGH 10 Ft Flex Wing New*Roadside Cutters * Featuring NEW Bush Hog TOUGH 2710L Flex Wing Roadside Cutter Unit Is Available In Right Or Left Hand Version The Only 10 Ft Roadside Cutters Built

More information

MAX SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003

MAX SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003 MAX SERIES #1 Selling Tractor in the World 7-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 VERSATILITY - Max Series Industry-redefining eco-friendly

More information

STATE OF MINNESOTA Pricing Page (Typed Responses Preferred)

STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) SEQ. #430-1017 (Turf Maintenance Equipment) STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) Page 1 of 12 October, 2017 Vendor Name: Kinni Sport and Power Contact Person:Brendan Johnson Street

More information

AutomaticLubrication System

AutomaticLubrication System STATE OF MINNESOTA PRICING PAGE 1 of 5 Price quote for: AutomaticLubrication System Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Oil

More information

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) SEQ # 727-417 Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) April, 2017 quote for: TRACTOR: SKID STEERS AND OEM ATTACHMENTS Vendor Name:

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1016 T-628(5) Tractors, Ag Type Factory Attach. Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Lano Equipment Inc. Anoka Scott Fahey 6340

More information

VERSA PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Boom, Flail, Rotary Cutter. Rev Part No.

VERSA PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Boom, Flail, Rotary Cutter. Rev Part No. VERSA Boom, Flail, Rotary Cutter Rev 08-17 PARTS MANUAL Part No.02897300P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-372-9595 An Operator's Manual was shipped with the equipment in the Manual

More information

MAX SERIES. #1 Selling Tractor in the World 5-year Powertrain Warranty. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating

MAX SERIES. #1 Selling Tractor in the World 5-year Powertrain Warranty. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating MAX SERIES MAH5205_Series_Intro_MaxSeries_060314 #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: FAIRCHILD EQUIPMENT TODD AUGE 3100 HIGHWAY 13 WEST BURNSVILLE, MN, 55337 612-244-4886

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

REAR MOUNTED BOOM PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Flail. Rev Part No.

REAR MOUNTED BOOM PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Flail. Rev Part No. REAR MOUNTED BOOM Flail Rev 08-14 Part No. 02963600 PARTS MANUAL ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-372-9595 An Operator's Manual was shipped with the equipment in the Manual Canister.

More information

emax SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating

emax SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating emax SERIES MAH5205_Series_Intro_eMaxSeries_060314 #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY

More information

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) SEQ # 727-512 Tractors: Skid Steers OEM Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) May, 2012 quote for: TRACTORS: SKID STEERS AND OEM ATTACHMENTS Vendor

More information

Furnish separate price quote for: EXCAVATOR. 1.1 Make & Model Case CX300C Operating Weight. Price $

Furnish separate price quote for: EXCAVATOR. 1.1 Make & Model Case CX300C Operating Weight. Price $ Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Titan Machinery Inc. Andy Bethel 6340 County Road 101 E Shakopee, MN 55379 952-445-0365

More information

MTD LLC, P.O. BOX CLEVELAND, OHIO

MTD LLC, P.O. BOX CLEVELAND, OHIO Illustrated Parts Manual Zero Turn Tractors MTD LLC, P.O. BOX CLEVELAND, OHIO -001 Printed In USA Form No. -0 (March, 0) Seat Adjustment, All Models 1 1 1 1 1 1 1. - Hex Hd. Wshr Screw, #- x.. -00 Flangelock

More information

Backhoe Adaptation Chart BH BH4 BH5 BH70-X... BH6 BH12 BH80-X... BH13 BH19 BH90-X... BH20 BH BH25 BH29

Backhoe Adaptation Chart BH BH4 BH5 BH70-X... BH6 BH12 BH80-X... BH13 BH19 BH90-X... BH20 BH BH25 BH29 BACKHOES TABLE OF CONTENTS Backhoe Adaptation Chart......................................................... BH2 BH3 Groundbreaker-............................................................... BH4 BH24

More information

STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Crawler Dozer. Spec # Information Requested Answer

STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Crawler Dozer. Spec # Information Requested Answer Crawler Dozer Price quote for: Vendor Name: RDO Equipment Company Contact Person: Jesse Miller Street Address: 12500 Dupont Avenue South P.O. Box: City, State, Zip Burnsville, Minnesota 55337 Phone #:

More information

CONTRACT FOR MINNESOTA AGENCY TRACTOR RENTAL SUPPLIES AND SERVICES

CONTRACT FOR MINNESOTA AGENCY TRACTOR RENTAL SUPPLIES AND SERVICES CONTRACT FOR MINNESOTA AGENCY TRACTOR RENTAL SUPPLIES AND SERVICES The undersigned AGENCY and VENDOR, the PARTIES to the CONTRACT, Agree to perform in accordance with the provisions of this CONTRACT, including

More information

PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Boom. Part No P. Rev 03-18

PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Boom. Part No P. Rev 03-18 Boom Rev 03-18 PARTS MANUAL Part No. 02981992P ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-372-9595 An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used:

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used: SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required)

ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required) Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Titan Machinery Inc Andy Bethel 6340 County Road 101 East Shakopee, MN 952-445-5400

More information

FINISH MOWERS. Discover the premium cut quality that makes Woods the undisputed leader in finish mowers

FINISH MOWERS. Discover the premium cut quality that makes Woods the undisputed leader in finish mowers FINISH MOWERS Discover the premium cut quality that makes Woods the undisputed leader in finish mowers Contents Finish Mowers Table of Contents Rear-mount and Rear Discharge Mowers...4 Standard-duty...

More information

WORKMASTER UTILITY TRACTORS WORKMASTER 55 I WORKMASTER 65 I WORKMASTER 75

WORKMASTER UTILITY TRACTORS WORKMASTER 55 I WORKMASTER 65 I WORKMASTER 75 WORKMASTER UTILITY TRACTORS WORKMASTER 55 I WORKMASTER 65 I WORKMASTER 75 02 HIGH PRODUCTIVITY AND HIGH VALUE The perfect combination of value, comfort and productive features. WORKMASTER utility tractors

More information

Invitation to Bid BOE. Ground Maintenance Equipment

Invitation to Bid BOE. Ground Maintenance Equipment Invitation to Bid 20170123-BOE Ground Maintenance Equipment Responses to an Invitation to Bid will be received by the Purchasing Supervisor, Sumner County Board of Education, 1500 Airport Road, Gallatin,

More information

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5) ** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. ** SWIFT Vendor Numbers: Provide

More information