Protection of Light Armours Against Shaped Charge Projectiles

Size: px
Start display at page:

Download "Protection of Light Armours Against Shaped Charge Projectiles"

Transcription

1 PROBLEMS OF MECHATRONICS. ARMAMENT, AVIATION, SAFETY ENGINEERING ISSN (2), 2010, Protection of Light Armours Aginst Shped Chrge Projectiles Adm WIŚNIEWSKI Militry Institute of Armment Technology, 7 Wyszyńskiego St., Zielonk, Polnd Astrct. The herey work descries the exmples of protection of light fighting vehicles rmoured with dditionl rective rmours. The wy of protecting of light fighting vehicles with the use of composite-rective rmours ginst penetrtion with HEAT projectiles (with penetrtion ility of 300 mm RHA) nd ginst smll clire (up to 14,5 mm) rmour-piercing ullets re shown on the exmple of the BWP-1. Technicl prmeters of the CERAWA-1 rmour nd its ssemly on BWP-1 re presented. The work lso presents the results of sttic tests of severl vrints of rective-pssive pnels of light fighting vehicles ginst PG-7 projectiles perfortion t the ngle of 60 nd 72 from norml to the cssette surfce. Depending on the surfce mss of the light rective-pssive rmour pnels, different levels of dmge to the rmour witness plte were chieved. Keywords: mterils technology, explosion, explosive rective rmour, shped chrge projectile, rmour protection 1. INTRODUCTION Armours of fighting vehicles fter the II World Wr nd other wrs, especilly in the Middle Est, usully reched high degree of resistnce to perfortion of shped chrge projectiles. * Presented t 8 th Interntionl Armment Conference on Scientific Aspects of Armment nd Sfety Technology, Pułtusk, Polnd, 6-8 Octoer, 2010.

2 18 A. Wiśniewski It concerns first of ll: HEAT (high explosive nti-tnk) hnd grendes, tnk rounds nd guided missiles with the penetrtion ility of up to h = 1300 mm of the RHA (rolled homogeneous rmour) [1-3]. Armours of such vehicles must effectively distur the penetrtion of shped chrge projectiles nd e resistnt to the detontion of lrge quntity of high-energy explosive, contined in the shped chrge projectiles. Such quntity of explosive in guided missiles nd in shped chrge projectiles s well s thick csing of such projectiles, effectively destroy ERA rective rmours usully situted s dditionl protection [3]. Only few constructions of rective rmours, eg. ERAWA-1 nd 2, re minimlly sensitive to such destructive effect [3]. The rmours of light nd medium fighting vehicles (BWP), re not resistnt to perfortion even y typicl HEAT hnd grendes, eg. RPG-7. Nowdys such vehicles re protected with the use of other, lighter thn RHA rmours from the perfortion of RPG-7 hnd grendes with the PG-7 projectiles (the most often used in the world) with the penetrtion ility of h = 300 mm of the RHA nd ginst AP ullets of the clires d = 7,62 14,5 mm. The BWP protection from the perfortion of PG-7 projectiles is provided y different rective rmours (Fig. 1) Fig. 1. Light fighting vehicles with ERA cssettes (1) protecting from PG-7 type shped chrge projectiles; Brdley with different non modulr cssettes, FV432 Mk3 BULLDOG with modulr cssettes For lrge quntity of light western LFVs nd Russin BWP-1 type LFVs mde round the world, s well s the proposls for their moderniztion y the Polish [4] industry, the necessity rose for incresing the protection level of this type of rmours. It is for this purpose tht the modulr CERAWA-1 composite- -rective rmour [5, 6] which protects ginst the perfortion of shped chrge projectiles with the penetrtion ility of h = 300 mm RHA nd ginst 14,5 mm AP ullets hs een developed. This rmour, with the mss of 920 kg nd the re of 3,5 m 2 protects front upper, ottom nd side prts of the hull nd the front nd side prt of the turret. During horizontl firing, the CERAWA-1 cssettes, inclined t some ngle,

3 Protection of Light Armours Aginst Shped Chrge Projectiles 19 effectively shield the whole front plte, despite the fct tht their re is much smller thn the re of this plte. This rmour, fstened on the BWP-1, ws displyed t the III Interntionl Exhiition of Defence Industry Kielce 95 in Polnd. Thnks to its full modulrity, smll thickness nd esy ssemly method, the CERAWA-1 [7] rmour cn e pplied to other fighting vehicles. 2. TESTS OF THE REACTIVE-PASSIVE ARMOUR The sttic tests which were crried out, tested the protective ility for the rective-pssive rmour pnels with ERAWA-1 rective cssettes composed from n luminium lloy, during penetrtion with shped chrge jet generted y PG-7 projectile [8]. Three different constructions of rmour pnels (Fig. 2) hve een used nd on every pnel, the tests with the use of shped chrge projectiles plced t ngles of α = 60 nd α = 72 from norml to the surfce of the externl cssette were crried out. Fig. 2. The rrngement of the PG-7 shped chrge projectile in reltion to the ERAWA-1 rective cssette The pnel of the rective-pssive rmour (Fig. 3) consisted of the ERAWA-1 cssette (1) mde of n luminium lloy which ws screwed on to the steel chnnel section (4) with the length of 500 mm y mens of nuts (7). Fig. 3. Rective-pssive pnel version 1: 1 ERAWA 1 cssette, 2 steel plte 1, 3 RHA plte 2 (witness), 4 steel chnnel section, 5 sleeve, 6 screw, 7 nut

4 20 A. Wiśniewski This chnnel section ws screwed with screws (6) to the steel plte 1 (2) to which the sleeves (5) with screwed holes were welded on. The chnnel section with the ERAWA-1 cssette ws plced on the steel rmour plte 2 the witness, with the thickness of 8 mm (3) without dditionl fixing. The steel plte 1 (RHA or St3) with the re of mm ws supported in two plces on the RHA plte 2 (witness). The RHA plte 2 (witness) with the size of mm ws rrnged on two chnnel sections without ny fixing. Setting of PG-7 shped chrge projectiles in reltion to ERAWA-1 rective cssettes [8] nd prmeters of ll pnels with the height of c < 160 mm were shown in Tle 1. TABLE 1. Prmeters of pnels of pssive-rective rmours No. of pnel /No. of vrint Setting ngle of PG-7 projectile in reltion the surfce of ERAWA-1 cssette, deg Mteril of plte 1 Surfce mss of pnel, m [kg/m 2 ] 1/1 72 RHA 227 2/1 60 RHA 227 3/2 72 St /2 60 St /3 72 RHA 221 6/3 60 RHA 221 The view of pnels of version 1 with ERAWA-1 cssettes efore nd fter the initition of the PG-7 projectile is shown in Figures 4-5. Fig. 4. Pnel 1 with the ERAWA-1 cssette efore the initition of the PG-7 projectile t n ngle of α = 72 () nd the RHA 2 plte (witness) fter the initition of the projectile () On the rmour plte 2 (witness) no trces of shped chrge jet were scertined. The PG-7 shped chrge jet ws stopped y the detontion of explosive in the ERAWA-1 cssette s well s the RHA plte 1 which ws dmged in the plce where the cssette ws fixed.

5 Protection of Light Armours Aginst Shped Chrge Projectiles 21 Fig. 5. Pnel 2 with the ERAWA-1 cssette efore the initition of the PG-7 projectile t n ngle of α = 60 () nd the RHA plte 2 (witness) fter the initition of the projectile () The shped chrge jet pierced the RHA plte 1 nd on the witness rmour plte trce ppered in the form of copper lyer from the shped chrge jet, ut the penetrtion of the rmour witness plte did not tke plce. In the following version 3 (Fig. 6-7) insted of the RHA plte 1 the steel St3 plte 1 with the re of mm ws used nd the remining elements of the rmour were exctly the sme s in tests 1 nd 2. Fig. 6. Pnel 3 with the ERAWA-1 cssette efore the initition of the PG-7 projectile t n ngle of α = 72 () nd the RHA plte 2 (witness) fter the initition of the projectile () Fig. 7. Pnel 4 with the ERAWA-1 cssette efore the initition of the PG-7 projectile t n ngle of α = 60 () nd the RHA plte 2 (witness) fter the initition of the projectile ()

6 22 A. Wiśniewski The shped chrge jet pierced the St3 steel plte nd penetrted the rmour witness plte in the depth of DP = 4,5 mm. As result of the detontion of explosive in the shped chrge projectile nd in the rective cssette the deflection of the rmour witness plte out 8 mm lso occurred. The shped chrge jet pierced the St3 steel plte nd lso pierced through the rmour witness plte DP = 8 mm. The deflection of the upper metl sheet s result of the initition of the explosive in the shped chrge projectile nd in the rective cssette mounted to 22 mm. In the susequent version 3 of the rective-pssive rmour (Fig. 8) its construction with reltion to vrints 1 nd 2 ws chnged so tht the steel plte 1 with the re of mm ws supported in three plces on the rmour plte 2 (witness), i.e. every 150 mm in the plces of centres of following luminium ERAWA-1 cssettes. This three-point support cused tht the construction in vrint 3 to ecme stiffer thn in vrints 1 nd 2. The distnces etween pltes 1 nd 2 in vrint 3 of the pnel were smller thn the distnces in vrints 1 nd 2. Fig. 8. Pnel of the rective-pssive rmour version 3: 1 ERAWA 1 cssette, 2 steel plte 1, 3 RHA plte 2 (witness), 4 steel chnnel section, 5 sleeve, 6 screw, 7 nut The view of pnels with ERAWA-1 cssettes in version 3 efore nd fter the initition of the PG-7 projectile is presented in Figures Fig. 9. Pnel 5 with the ERAWA-1 cssette efore the initition of the PG-7 projectile t the ngle of α = 72 () nd the RHA plte 2 (witness) fter the initition of the projectile ()

7 Protection of Light Armours Aginst Shped Chrge Projectiles 23 The shped chrge jet ws stopped y the detontion of explosive in the ERAWA-1 cssette nd y the RHA plte 1, nd the deflection of the RHA plte 2 (witness) ws 11 mm. Fig. 10. Pnel 6 with the ERAWA-1 cssette efore the initition of the PG-7 projectile t n ngle of α = 60 () nd the RHA plte 2 (witness) fter the initition of the projectile () The shped chrge jet pierced the RHA plte 1, on the rmour witness plte where trce ppered in the form of copper lyer from the shped chrge jet, ut the penetrtion of the rmour plte 2 (witness) did not tke plce. The deflection of the rmour plte 2 (witness) mounted to 13 mm. The list of the results of sttic tests with the use of shped chrge PG-7 projectiles nd pnels of rective-pssive rmours is shown in Tle 2 nd in Figure 11. TABLE 2. Results of the firing t pnels of pssive-rective rmours with the use of PG-7 projectiles No. of pnel / No. of vrint / setting ngle of PG-7, α [º] Mteril of steel plte 1 / penetrtion depth of RHA plte 2 (witness), Sizes of holes in RHA plte 2 (witness), x [mm] DP [mm] inlet outlet Deflection of RHA plte 2 (witness), d [mm] 1 / 1 / 72 RHA / / 1 / 60 RHA / 1 ~ / 2 / 72 St3 / 4, / 2 / 60 St3 / / 3 / 72 RHA / / 3 / 60 RHA / 2 ~3 3-13

8 24 A. Wiśniewski c d Fig. 11. The depth of penetrtion of the plte 1, the RHA plte 2 (witness) nd the deflection of the RHA plte 2 (witness): in the function of mss of the rmour pnel for the ngles of α = 72 () nd α = 60 (), in function of the height of the rmour pnel for the ngles α = 72 (c) nd α = 60 (d) 3. CONCLUSIONS On the sis of tests crried out, the following conclusions cn e drwn: 1. The pnel of the rective-pssive rmour with ERAWA-1 cssettes from luminium lloy cn protect light rmoured fighting vehicles ginst the perfortion y PG-7 projectiles hitting this rmour t n ngle of 60 o α 72 o (18 o β 30 o from the surfce of the rmour). 2. After the perfortion of the rective-pssive rmour on the surfce of the hull of protected vehicle, smll crters with depth of severl millimetres nd trces of dispersed copper from the shped chrge jet of PG-7 cn occur. 3. The est protection ws provided y the rective-pssive rmour in version 1. The shped chrge jet did not pierce plte 1 with the size of mm oth for the ngle of α = 72 s well s for α = 60. There ws lso no deflection of the steel rmour witness plte with the size of mm s result of the initition of the explosive of the shped chrge jet projectile nd the ERAWA-1 cssette.

9 Protection of Light Armours Aginst Shped Chrge Projectiles The protection ginst the perfortion of the shped chrge jet ws lso provided y the rective-pssive rmour in version 3. Deflections of the steel rmour witness pltes (11 mm pnel 5 nd 13 mm pnel 6) occurred for α = 60 nd α = 72 setting ngles of the shped chrge jet PG-7 projectile in reltion to the norml externl surfce of the cssette; the deflections were cused y the smller distnces etween pltes 1 nd 2 nd lso ecuse of the greter stiffness of plte 1 s result of its eing supported in three plces on the plte 2 (witness) nd s result of smller distnces etween pltes 1 nd 2 in vrint 3 of the pnel thn the distnces in vrints 1 nd 2. REFERENCES [1] Witkowski I., Light nd medium rmoured fighting vehicles (in Polish), Pulishing House WiS, Wrsw, [2] Wiśniewski A., Włodrczyk E., Zuik T., Hj W., Podgórzk P., Protection of fighting vehicles (in Polish), Prolems of Armment Technology, Militry Institute of Armment Technology, vol. 89, [3] Wiśniewski A., Armours construction, designing nd reserch (in Polish), Scientific nd Technicl Pulishing House, Wrsw, [4] Brmowicz J., Pwlk S., Wojdn J., Moderniztion of infntry fighting vehicle BWP-1 (in Polish), Prolems of Armment Technology nd Rdioloction, Militry Institute of Armment Technology, vol. 58, [5] Wiśniewski A., Brmowicz W., Wojdn J., Jskot S., Segment rmour protection, Polish Ptent No , [6] Wiśniewski A., Pssive-rective rmours, Proceedings of IVth Interntionl Armment Conference Scientific Aspects of Armment Technology. WAT, Wplewo, 9-11 Octoer 2002, pp , [7] Foss C.F., CERAWA-1 Explosive rective rmour system. Jne s Armour nd Artillery, Jne s Informtion Group Limited [8] Wiśniewski A., Tomszewski Ł., Pcek D., Tesing of protective ility of rective pnels, Report of the Militry Institute of Armment Technology, (unpulished), Zielonk, 2010.

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally) FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................

More information

Convenience electronics

Convenience electronics Convenience electronics Displys on "opening" the roof To gurntee high level of sfety, roof movement is ccompnied, depending on the equipment vrint, y opticl, coustic nd/or text displys/indictions. The

More information

FRONT SIDE FIX WINDOW

FRONT SIDE FIX WINDOW WINSHIEL/WINOWGLSS/MIRROR FRONT SIE FIX WINOW REPLEMENT FRONT SIE FIX WINOW The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion

More information

Transmission and Driveline. Section 2A - Transmission and Driveline

Transmission and Driveline. Section 2A - Transmission and Driveline Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2

More information

IPA FITTINGS FOR 16 X 9 MM GROOVE A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)

IPA FITTINGS FOR 16 X 9 MM GROOVE A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45) IP FITTINGS FOR 16 X 9 MM GROOVE 2018 /S J. PETERSENS ESLGFRIK JCO PETERSENSVEJ 9, DK-9240 NIE TEL: (+45) 98 35 15 00 3 FITTINGS FOR 16 X 9 GROOVE Table of Contents PGE Wood profi le 4 Suggestion - Number

More information

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs. FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic

More information

REPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration.

REPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration. 7012 REPLCEMENT The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion re included. 1. REMOVE ROOF HEDLINING SSY (See pge

More information

Duct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR

Duct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR LindRekt LindRekt mens rectngulr ventiltion ducts nd fittings. These re mde in oth stndrd nd specil versions. The product rnge lso includes complete, esily used joining system. Contents LindRekt Generl

More information

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D 51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction

More information

SSAB Water mains PIPES AND FITTINGS

SSAB Water mains PIPES AND FITTINGS SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted

More information

41set. redhen MODUL GABION SYSTEM. 41 means:

41set. redhen MODUL GABION SYSTEM. 41 means: 1 MODUL GABION SYSTEM redhen 41set 41 mens: module system which llows you to build vrious forms of gbion rchitecture using just few components 4 pcs. d41x68 8 pcs. n41 "while you wit order reliztion with

More information

Application Examples of Air-piloted Valves

Application Examples of Air-piloted Valves ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht

More information

FUEL SYSTEM. Table of Contents. Section 3C Oil Injection

FUEL SYSTEM. Table of Contents. Section 3C Oil Injection Tle of Contents FUEL SYSTEM Section 3C Oil Injection OIL INJECTION Specil Tools................................ 3C-2 Oil System Opertion......................... 3C-2 Oil Pump Output..........................

More information

Carl Nielsen Music is Life. SET UP MANUAL Travelling Exhibition from Odense City Museums DK-5000 Denmark

Carl Nielsen Music is Life. SET UP MANUAL Travelling Exhibition from Odense City Museums DK-5000 Denmark Crl Nielsen Music is Life SET UP MNUL Trvelling Exhiition from Odense City Museums DK-5000 Denmrk CONTENT IN FLIGHTCSES CRL NIELSEN TOURING EXHIITION ODENSE CITY MUSEUMS KVORNING DESIGN & COMMUNICTION,

More information

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd

More information

Brazed heat exchanger XB

Brazed heat exchanger XB Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the

More information

RESEARCHES ON THE INFLUENCE OF PRESSURE WAVE COMPRESSOR ON THE INTAKE AIR TEMPERATURE AT THE SUPERCHARGED ENGINES

RESEARCHES ON THE INFLUENCE OF PRESSURE WAVE COMPRESSOR ON THE INTAKE AIR TEMPERATURE AT THE SUPERCHARGED ENGINES Bulletin of the Trnsilvni University of Brşov Vol. 8 (57) No. 1-2015 Series I: Engineering Sciences RESEARCHES ON THE INFLUENCE OF PRESSURE WAVE COMPRESSOR ON THE INTAKE AIR TEMPERATURE AT THE SUPERCHARGED

More information

Arcadia ssembly Instructions. 501x363x242cm / 16 5"Lx11 103/4"x7 111/4"

Arcadia ssembly Instructions. 501x363x242cm / 16 5Lx11 103/4x7 111/4 A ssemly Instructions Arcdi 5000 English_71087 501x36342cm / 16 5"Lx11 103/4"x7 111/4" Compny informtion: Plrm Americs Inc. 9735 Commerce Prkwy Kutztown, PA, USA Service Center: Toll Free: (877) 627-8476

More information

POWER TRIM. Table of Contents. Section 5D - Auto Trim II

POWER TRIM. Table of Contents. Section 5D - Auto Trim II SERVICE MANUAL NUMBER 11 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II Auto Trim II System................... 5D-2 Description........................ 5D-2 Auto Trim II Opertion.................

More information

POWER TRIM. Table of Contents. Section 5D - Auto Trim II

POWER TRIM. Table of Contents. Section 5D - Auto Trim II SERVICE MANUAL NUMBER 14 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II 1 B Auto Trim II System................. 5D-2 Description...................... 5D-2 Auto Trim II Opertion...............

More information

WINDSHIELD / WINDOWGLASS

WINDSHIELD / WINDOWGLASS WINSHIEL / WINOWGLSS QURTER WINOW GLSS QURTER WINOW GLSS OY WINSHIEL / WINOWGLSS OMPONENTS 97 RER SIE SETK FRME LH RER SIE SETK FRME RH RER SET USHION SSEMLY RER OOR OPENING TRIM WETHERSTRIP LH TONNEU

More information

tel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves

More information

Spark Plug Fouling 3.0 Liter OptiMax

Spark Plug Fouling 3.0 Liter OptiMax WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected

More information

Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits

Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4

More information

CCD-493 KIT SERIES INSTRUCTION SHEET

CCD-493 KIT SERIES INSTRUCTION SHEET (COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED

More information

Floor Scrubs Squeegees Handles Hand Brushes Shovels and Scoops Scrapers Tube Brushes Wall Brackets Metal Detectable

Floor Scrubs Squeegees Handles Hand Brushes Shovels and Scoops Scrapers Tube Brushes Wall Brackets Metal Detectable »» Brooms»» Floor Scrubs»» Squeegees»» Hndles»» Hnd Brushes»» Shovels nd Scoops»» Scrpers»» Tube Brushes»» Wll Brckets»» Metl Detectble hygiene nd food hndling WWW.SITECRAFT.COM.AU BROOMS Yrd Brooms With

More information

TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS

TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering

More information

MODU System. About MODU

MODU System. About MODU Contents Introduction... 3 Aout This Instlltion Mnul... 3 Preprtion for Instlltion... 3 Generl Tools... 4 Cutting Bems... 7 Assemly... 8 MODU System Component Groups... 8 Foot Mounting... 9 1.0 Mounting

More information

Roller and ball bars for easy and safe die change

Roller and ball bars for easy and safe die change Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension

More information

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions

More information

Exhaust System. Table of Contents. Section 7A - General Information. General Information

Exhaust System. Table of Contents. Section 7A - General Information. General Information Exhust System Generl Informtion Tle of Contents Section 7A - Generl Informtion Generl Informtion All Models... 7A-2 Exhust System Notice...7A-2 Reference Note...7A-2 Exhust System Connections...7A-2 Through

More information

Security Evaluation of DPA Countermeasures Using Dual-Rail Pre-charge Logic Style

Security Evaluation of DPA Countermeasures Using Dual-Rail Pre-charge Logic Style Security Evlution of DPA Countermesures Using Dul-Ril Pre-chrge Logic Style Disuke Suzuki Minoru Seki Mitsuishi Electric Corportion, Informtion Technology R&D Center 1 Summry - Motivtion nd results Outline

More information

UPS Pure Sinewave UPS

UPS Pure Sinewave UPS UPS Pure Sinewve UPS USR S MANUAL 1.6K / 3.2K / 5KVA 6.4K / 8K/ 10KVA 1. INTRODUCTION 1. 1.1 Generl Description This UPS, powerful ll-in-one solution, delivers unsurpssed clen true sine wve output power

More information

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073

More information

Some thoughts on requirements for languages in engineering Requirements for Languages for modelling big systems World Ontology Summit,

Some thoughts on requirements for languages in engineering Requirements for Languages for modelling big systems World Ontology Summit, Some thoughts on requirements for lnguges in engineering Requirements for Lnguges for modelling big systems World Ontology Summit, 2012-03-22 Dvid Lel Topics 1. Need for clsses, clsses of clss, etc. Not

More information

POWER STEERING PUMP 10 A

POWER STEERING PUMP 10 A POWER STEERING 72951 PUMP 10 A Tle of Contents Pge Pump Speifitions.................... 10A- 1 Torque Speifitions................ 10A- 1 Tools/Selnts...................... 10A- 1 Power Steering Pump nd

More information

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2 Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.

More information

ELECTRICAL AND IGNITION

ELECTRICAL AND IGNITION ELECTRICAL AND IGNITION 2 D TIMING/SYNCHRONIZING/ADJUSTING 2D- 1 Tle Of Contents Pge Timing/Synchronizing/ Adjusting............................ 2D-1 Specifictions........................ 2D-1 Specil Tools.........................

More information

Sectional Overhead Doors - Standard Lift

Sectional Overhead Doors - Standard Lift Sectionl Overhed Doors - Stndrd Lift Instlltion Mnul Northern Sles & Distriution Centre The Door Centre, Discovery Prk, Crossley Rod, Stockport, SK4 5BW /induprt /induprt /induprt /compny/induprt-ltd Contents

More information

FUEL SYSTEM. Table of Contents. Section 3B - Carburetors

FUEL SYSTEM. Table of Contents. Section 3B - Carburetors Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Fuel System - Trouleshooting.............. 3B-2 Generl Informtion.................... 3B-2 Attenutor And Cr Throttle Levers......... 3B-4

More information

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB) Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl

More information

SureForce Bar Clamps. More powerful clamping force with less effort

SureForce Bar Clamps. More powerful clamping force with less effort The Pros Know SureFore Br Clmps More powerful lmping fore with less effort EXCEPTIONAL RELIABLE TOUGH The essene of n Amerin legy Totlly seled threds withstnd high impt work environments inluding dust,

More information

ELECTRICAL SYSTEM 4 D INSTRUMENTATION

ELECTRICAL SYSTEM 4 D INSTRUMENTATION ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1

More information

CC-410 KIT SERIES INSTRUCTION SHEET

CC-410 KIT SERIES INSTRUCTION SHEET (COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN

More information

INSTALLATION GUIDE INSTALLATION GUIDE

INSTALLATION GUIDE INSTALLATION GUIDE INSTALLATION GUIDE INSTALLATION GUIDE CONTACT US By selecting Hiku fn, you ve chosen qulity design, heightened comfort nd effortless conservtion. Use this guide to sfely instll your fn. Plese contct us

More information

Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay

Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV

More information

FINGER STRIPS. and other EMI shielding products. Characteristics

FINGER STRIPS. and other EMI shielding products. Characteristics BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used

More information

Chapter URL:

Chapter URL: This PDF is selection from n out-of-print volume from the Ntionl Bureu of Economic Reserch Volume Title: Price nd Quntity Trends in the Foreign Trde of the United Sttes Volume Author/Editor: Robert E.

More information

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU

More information

CCS-810 KIT SERIES INSTRUCTION SHEET

CCS-810 KIT SERIES INSTRUCTION SHEET (COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED

More information

STERLING POWER PRODUCTS

STERLING POWER PRODUCTS STERLING POWER PRODUCTS ALTERNATOR - to - BATTERY CHARGER Advnced chrging technology AB0 AB0 AB0 AB0 Pro Digitl REMOTE CTROL (OPTI) Bttery-Bttery Chrger on/off. V timer 0. A min lrm light Alrm shutdown

More information

ELECTRICAL AND IGNITION 2 A IGNITION SYSTEM

ELECTRICAL AND IGNITION 2 A IGNITION SYSTEM ELECTRICAL AND IGNITION 2 A IGNITION SYSTEM 54637 Tle of Contents Pge Ignition System.......................... 2A-1 Description........................... 2A-1 Ignition Trouleshooting...................

More information

1/18 2WD MINI MONSTER TRUCK INSTRUCTION MANUAL WARRANTY

1/18 2WD MINI MONSTER TRUCK INSTRUCTION MANUAL WARRANTY /8 WD MINI MONSTER TRUCK NO.6-FS Plese red the instruction mnul crefully efore operting your cr. INSTRUCTION MANUAL WARRANTY Thunder Tiger Corportion gurntees this model kit to e free from defects in oth

More information

Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187

Murtfeldt Internet   Chain Tensioners for Roller Chains to DIN8187 Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for

More information

Press control block PSB Type approved according to DIN EN 693

Press control block PSB Type approved according to DIN EN 693 Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl

More information

00083FAB-DC DRAWN BY DATE CHK SCALE SIZE

00083FAB-DC DRAWN BY DATE CHK SCALE SIZE D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL

More information

BMW K1600 GT / GTL Engine Protection Bars INSTALLATION INSTRUCTIONS

BMW K1600 GT / GTL Engine Protection Bars INSTALLATION INSTRUCTIONS mde in USA BMW K00 GT / GTL Engine Protection Brs INSTALLATION INSTRUCTIONS The most up to dte instructions cn e downloded from the product pge t ltrider.com, under the instructions t. Der Rider, Thnk

More information

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type

More information

CORD/CORDLESS CLIPPER INSTRUCTIONS

CORD/CORDLESS CLIPPER INSTRUCTIONS CORD/CORDLESS CLIPPER INSTRUCTIONS Plese red ll instructions crefully to fmilirise yourself with your new clipper efore using. Sve these instructions for further reference. For ny further ssistnce or informtion

More information

SYSTEM FITTINGS FOR OUTWARD OPENING WINDOWS AND DOORS

SYSTEM FITTINGS FOR OUTWARD OPENING WINDOWS AND DOORS SYSTEM FITTINGS FOR OUTWRD OPENING WINDOWS ND DOORS 201 - established 189 - IP + National seal Systems Ltd WOOD PROFILE HINGES & FITTINGS HINGES & FITTINGS SFETY TH & -RESTRITORS D ESPGNOLETTE OLTS E ESSORIES

More information

THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.

THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 TOP CP PERFORTED SINGLE HINGE KNOCK-OUTS FOR PDU POWER CORD SIDE PNEL RER PERFORTED

More information

CAD-CAE IMPLEMENTATION IN CARGO SECURING SYSTEMS TESTING

CAD-CAE IMPLEMENTATION IN CARGO SECURING SYSTEMS TESTING Proceedings in Mnufcturing Systems, Volume 9, Issue 4, 2014, 239 244 ISSN 2067-9238 CAD-CAE IMPLEMENTATION IN CARGO SECURING SYSTEMS TESTING Ion-Tieriu GIURGIU 1,*, Petru ROȘCA 2, Iulin-Florin PANĂ 3 1)

More information

KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2

KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION

More information

Assembly instructions

Assembly instructions Assemly instructions Comi Stemer Unit Model Type of energy Unit type Trnsltion from the originl document 10013865-0AMDE-- 1/4/2017 FlexiComi MgicPilot FlexiComi Clssic 6.15 6.21 10.15 10.21 20.15 20.21

More information

AltRider LLC. Enjoy it, show it off, and most of all, RIDE IT! Venture On, Jeremy LeBreton. Triumph Tiger Explorer 1200 Crash Bars.

AltRider LLC. Enjoy it, show it off, and most of all, RIDE IT! Venture On, Jeremy LeBreton. Triumph Tiger Explorer 1200 Crash Bars. AltRider Crsh Brs for the Triumph Tiger Explorer 00 INSTALLATION INSTRUCTIONS Der Rider, Thnk you for choosing AltRider! Whether sesoned world dventurer or first time ADV-Newie, we welcome you to the AltRider

More information

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02 CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................

More information

Low Pressure Domestic Burners

Low Pressure Domestic Burners 95 CHAPTER 12 Low Pressure Domestic Burners The principle of vporiing oil in low pressure burner is shown in fig. 1. Air nd oil re mixed within the nole, then Y ---U OIL NOZZLE j FIG. 1. Digrm showing

More information

MNPV6 REV A DISCO 4X FINAL ASSY

MNPV6 REV A DISCO 4X FINAL ASSY NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N

More information

Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers

Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used

More information

Evaluation of Selected Insecticides for Control of Insect Pests of Soybeans. Beaumont, TX

Evaluation of Selected Insecticides for Control of Insect Pests of Soybeans. Beaumont, TX Title: Evlution of Selected Insecticides for Control of Insect Pests of Soyens. Beumont, TX. 2001. Project Investigtor: M.O. Wy Texs A&M University Agriculturl Reserch & Extension Center 1509 Aggie Drive

More information

STEEL WIRE & ROPE FITTINGS

STEEL WIRE & ROPE FITTINGS 6 Contents Bever mintins wie rnge of wire rope n fittings tht cn be use for towing n lifting, pplictions. Furthermore Bever hs the bility to offer mnufcture slings me to orer. With Bever s ISO Qulity n

More information

FUEL SYSTEM. Table of Contents. Specifications. Section 3A Electric Fuel Pump FUEL SYSTEM. Fuel Recommended Gasoline Recommended Oil

FUEL SYSTEM. Table of Contents. Specifications. Section 3A Electric Fuel Pump FUEL SYSTEM. Fuel Recommended Gasoline Recommended Oil FUEL SYSTEM Section 3A Electric Fuel Pump Tble of Contents Specifictions........................... 3A-1 Fuel Pump Assembly.................... 3A-2 Specil Tools........................... 3A-3 Fuel Lift

More information

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4 Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt

More information

COLLECTION JARS & LINERS SUCTION COLLECTION JARS SUCTION LINERS ACCESSORIES

COLLECTION JARS & LINERS SUCTION COLLECTION JARS SUCTION LINERS ACCESSORIES COLLECTION JARS & SUCTION LINERS SUCTION ACCESSORIES English version 11/ 2010 TM COLLECTION JARS The collection jrs re used to collect liquids or mucus resulting from medicl suction. They cn e used in

More information

COLLECTION JARS & SUCTION LINERS SUCTION COLLECTION JARS SUCTION LINERS ACCESSORIES. English version 11/ 2 010

COLLECTION JARS & SUCTION LINERS SUCTION COLLECTION JARS SUCTION LINERS ACCESSORIES. English version 11/ 2 010 COLLECTION JARS & SUCTION LINERS SUCTION ACCESSORIES English version 11/ 2 010 TM COLLECTION JARS The collection jrs re used to collect liquids or mucus resulting from medicl suction. They cn e used in

More information

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15

330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15 L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE

More information

Boiler room components 0861EN April 2017 Distribution and regulation units

Boiler room components 0861EN April 2017 Distribution and regulation units oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling

More information

TOP CAP KNOCK-OUTS FOR

TOP CAP KNOCK-OUTS FOR 2 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP.. VISIT OUR ON-LINE CTLOG T WWW.PNDUIT.COM FOR LIST OF CURRENT PRTS PPLICLE FOR TOP CP

More information

ADDITIONAL HAND TOOLS ADDITIONAL HAND TOOLS

ADDITIONAL HAND TOOLS ADDITIONAL HAND TOOLS ITION HN TOOS ITION HN TOOS W h e n i t s o u t s u c c e s s, d e t i l s m t t e r HOW MUH TTENTION SHOU WE GIVE TO ETIS? lwys more thn you would first think. The line of dditionl Unior hnd tools comprises

More information

ANALYSIS OF BAR AND NET SCREENS STRUCTURE PROTECTING VEHICLES AGAINST ANTI-TANK GRENADES FIRED FROM RPG-7

ANALYSIS OF BAR AND NET SCREENS STRUCTURE PROTECTING VEHICLES AGAINST ANTI-TANK GRENADES FIRED FROM RPG-7 Journal of KONES Powertrain and Transport, Vol. 18, No. 1 2011 ANALYSIS OF BAR AND NET SCREENS STRUCTURE PROTECTING VEHICLES AGAINST ANTI-TANK GRENADES FIRED FROM RPG-7 Marek Szudrowicz Military Institute

More information

631 ALLOWANES AND TOLERANCES

631 ALLOWANES AND TOLERANCES 631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce

More information

Experimental investigation on a flat heat pipe heat exchanger for waste heat recovery in steel industry

Experimental investigation on a flat heat pipe heat exchanger for waste heat recovery in steel industry Aville online t www.sciencedirect.com ScienceDirect Energy Procedi 123 (217) 329 334 www.elsevier.com/locte/procedi 1st Interntionl Conference on Sustinle Energy nd Resource Use in Food Chins, ICSEF 217,

More information

Assembly Instructions Montageanleitung Instructions de montage. Arcadia D x 363W x 242H cm / 16 5"D x 11 10¾"W x 7 11¼"H

Assembly Instructions Montageanleitung Instructions de montage. Arcadia D x 363W x 242H cm / 16 5D x 11 10¾W x 7 11¼H Assemly Instructions Montgenleitung Instructions de montge Arcdi 5000 501D x 363W x 242H cm / 16 5"D x 11 10¾"W x 7 11¼"H EN IMPORTANT Plese red these instructions crefully efore you strt to ssemle this

More information

Exercise 2-2. Gearbox, Coupling, and Alignment EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. More information about the gearbox. Gear ratio.

Exercise 2-2. Gearbox, Coupling, and Alignment EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. More information about the gearbox. Gear ratio. Exercise 2-2 Gerbox, Coupling, nd Alignment EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the high-speed prt of the drive trin system between the gerbox nd the genertor.

More information

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL

More information

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic

More information

Time, Distance & Speed

Time, Distance & Speed CHAPTER 15 Time, Distne, Speed Exerise 1 Time, Distne & Speed 1. Find the unknown quntity in eh of the following : Distne =? km Speed = 20 km/hr Time : 3 hours. Distne = 90 miles Speed =? mph Time : 1

More information

Cable Trolleys for C-Rails Program

Cable Trolleys for C-Rails Program Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble

More information

Chain conveyors with endless chains with feed dogs in closed troughs are suitable for the transport of bulky material.

Chain conveyors with endless chains with feed dogs in closed troughs are suitable for the transport of bulky material. C o n v e y ing PPliCtiON Chin conveyors with endless chins with feed dogs in closed troughs re suitble for the trnsport of bulky mteril. This version of Vecopln-chin conveyors trnsports the mteril in

More information

Design Optimization of Two Wheeler (Bike) Chassis

Design Optimization of Two Wheeler (Bike) Chassis ISSN 2395-1621 Design Optimiztion of Two Wheeler (Bike) Chssis #1 Prksh Ktdre, #2 S.C.Shilwnt 1 ktdrep21@gmil.com 2 scshilwnt.se@sinhgd.edu #1 PG Student, Mechnicl Engg. Dept., SAOE Kondhw, Pune-411048

More information

MATKI ONE MOPR - RECESS INLINE PIVOT

MATKI ONE MOPR - RECESS INLINE PIVOT MATKI ONE MOPR - RECESS INLINE PIVOT INSTALLATION PARTS LIST MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454 388 EMAIL: techsupport@mtki.co.uk 0947AF 0/5

More information

@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10

@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10 @ ECV Technicl Dt High Lift Pllet Truck ECV 10 C ECV 10i C ECV 10 Lifting Mde Esy This specifiction sheet to VDI Guideline 198, only provides the technicl vlues for the stndrd truck. Different tyres, other

More information

R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS

R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES

More information

FUEL SYSTEM 5 E BSO / SAV EMISSION FUEL SYSTEM

FUEL SYSTEM 5 E BSO / SAV EMISSION FUEL SYSTEM FUEL SYSTEM 5 E 73662 BSO / SAV EMISSION FUEL SYSTEM Tle of Contents Pge Identifiction............................. 5E-1 Replcement Prts Wrning............... 5E-1 Torque Specifictions.....................

More information

SMP-BC Mixproof Valve

SMP-BC Mixproof Valve . kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often

More information

Snap & Grow 6 x8 254 L x 190 W x 209 H cm 100 L x 74 3 /4 W x 82 1 /4 H

Snap & Grow 6 x8 254 L x 190 W x 209 H cm 100 L x 74 3 /4 W x 82 1 /4 H Assemly Instrutions Snp & Grow 6 x8 254 L x 190 W x 209 H m 100 L x 74 3 /4 W x 82 1 /4 H Bse Size: 245x186m / 96 1 /4 x73 1 /4 In se of ddition SNAP & GROW 6x4 Extension Kit purhse Plese refer to the

More information

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24 POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6

More information

Table of Contents FORCE 75/90/120 MODELS INSTALLATION MANUAL

Table of Contents FORCE 75/90/120 MODELS INSTALLATION MANUAL FORCE 75/90/120 MODELS INSTALLATION MANUAL NOTICE to INSTALLER After Completing Instlltion, These Instructions Should Be Plced with the Product for the Owner s Future Use. Printed in U.S.A. 75/90/120 Model

More information

AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1

AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1 d03161 RECOMMENDED AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX ENGINE TYPE 912 AND 914 (SERIES) Repeting symbols: Plese, py ttention to the following symbols throughout

More information