HARVESTERS 903KH/909KH TRACKED

Transcription

1 HARVESTERS 903KH/909KH TRACKED

2 Tough equipment for a tough job. Logging isn t easy. Of course, nobody ever said it would be. And when it comes down to it, you re okay with that. But when you ve got a tough job to do, you need equipment. We re proud to say our KH-Series Tracked Harvesters fit the bill. The KH-Series is more powerful than ever. So you can get more done. Take on more of the forest. With a larger displacement 9.0L engine, these machines deliver the power you need to move, swing, and harvest faster than ever. Thanks to the lowest daily fuel cost in the industry, you ll be more efficient than ever, too. And with our redesigned cab, you ll be more comfortable than ever. 2 Logging isn t easy, but choosing and using your equipment should be. Which is why we ve created the KH-Series Tracked Harvesters. They re tough machines that make your job, well, a little less tough. 3

3 Engine Power 903KH John Deere PowerTech Plus 6090H 300 peak hp (224 kw) 909KH John Deere PowerTech Plus 6090H 300 peak hp (224 kw) Reach (To Attachment Pin) 29 ft. 0 in. (8.90 m) 29 ft. 0 in. (8.90 m) Operating Weight Single Grouser 24 in. (610 mm) 75,280 lb. ( kg) With 624C attachment 88,420 lb. ( kg) With 624C attachment Tractive Effort 55,700 lbf (248 kg) 74,300 lbf (331 kg) Best Applications Thinning, regeneration Thinning, regeneration and steep ground Waratah Head Model HTH622B, 623C, 624C HTH622B, 623C, 624C

4 More power. More productivity. More of just what you need. 4 5 Looking for a harvester that can handle the worst of the woods? Meet the KH-Series.

5 Redesigned cab. In the KH-Series, you ll enjoy a clearer view, a powerful HVAC system, more storage, and an optional deluxe seat. We ve also improved the placement of the key switch and six USB ports for easy access. Waratah factory installation. The KH-Series electrical and hydraulic components have been factory installed and fully documented for optimized performance and quick, consistent troubleshooting. And with structural and hose routing improvements, top-of-the-line Waratah harvesting heads will keep you running longer, better. Power. The 9.0L engine, available in 300 or 330 maximum horsepower, makes lifting, swinging, and tracking easier. And the 295-gallon fuel tank lets you get more done between fill-ups. CommandCenter. The factory-standard Advanced Display Unit gives the operator a clear view of critical gauges and superior on-board diagnostics. And the Sealed Switch Module lasts ten times longer than standard dash switches. Service access. For ease of maintenance, there are two points of entry into the engine and pump enclosure that can be reached via a walkway from the cab so you don t have to leave the machine. Debris management. The reverse cooling fan keeps leaves and pine straw off the grill for better airflow to the engine while on-demand fan speed keeps noise levels down, for you and bystanders. Hydraulics. With dual-swing motors for high torque, the KH-Series has all the brawn you need and a power management system that makes sure none of your horsepower is wasted. Protected undercarriage. With double flange rollers for maximum durability, this harvester handily clears nearly every obstacle.

6 It works harder, so you harvest easier. The KH-Series is built to perform, from its factory-installed Waratah harvesting head to its agile, long-wearing tracks. So you can get more done in less time. The woods will never know what hit em. Sturdy, hard-working boom designed specifically for harvesting operations. Powerful, factory-installed Waratah heads are easy to inspect and maintain. See the terrain, the trees, and the machine from every angle, thanks to a skylight, a bottom window, and better all-around visibility. The 9.0L engine is unmatched in performance. Reliable leveling keeps you secure on steep inclines and rough terrain. A high tractive effort-to-weight ratio with low ground pressure guarantees agility. 6 7

7 Get in the know with JDLink. JDLink, John Deere s innovative machine-monitoring system, takes the guesswork out of productivity. Through a secure Web site and text messages, you can track location, fuel consumption, efficiency, engine load, and more. Use the data you receive to adjust your usage and work habits to get the most from your machine and your time on the worksite. With JDLink, everyone from the operator to the comptroller is on the same page. With JDLink, you can: Get the data you need to adjust usage and boost productivity. Be alerted when your machine needs attention. Know whether a machine is harvesting, idle, or turned off. Estimate future jobs more accurately. Monitor fuel consumption rates.

8 More rock. Less roll. Steep, rocky worksites are no problem for the KH-Series. Its bestin-class leveling system keeps you steady, centered, and parallel to the ground even when climbing or tilting. That means you can work in a wider area and stay focused on harvesting, not on fighting gravity. The KH-Series offers all-around leveling: 26 degrees forward, seven degrees rearward, and 14 degrees on either side. 8 9 Get where you need to go this harvester can handle steep grades, stumps, and sloping terrain.

9

10 Where logging and luxury meet. You re no stranger to the 12-hour workday. So you need a cab that s built for comfort. One like we ve put in the KH-Series. Redesigned with you in mind, it s got a deluxe seat. A wide view. A powerful HVAC system. Brighter lighting. More convenient storage. New power ports. We like to think of it as the logger s lap of luxury. 1 With the new factory-mounted keyboard and mouse, and repositioned key switch and USB port, you ll have everything you need in front of you and within a comfortable reach. 1. The KH-Series features better all-around visibility. 2. The optional Air Ride Seat reduces operator fatigue. 3. With a redesigned HVAC system, this machine heats, cools, and defrosts quickly so you re ready to go in any weather You ll appreciate the AM/FM/CD/AUX radio, factorywired two- and three-pin connections for additional accessories, two 12-volt power ports, expanded storage space, and brighter cab lighting.

11 2 3 4

12 Harvesters that put you ahead of the game. With John Deere, harvesting heads are never an afterthought. The KH-Series was designed specifically for top-of-the-line Waratah equipment, from our integrated plug-and-play wiring to our factory-installed hydraulic system

13 With several top-of-the-line Waratah head options all with integrated plug-and-play wiring and plumbing your operational capabilities have never been broader. The KH-Series has been designed specifically for Waratah heads, from the cab to the tip of the stick. The consistent TimberRite measuring system optimizes performance so you can spit out more trees every hour. Structural and hose routing improvements. Harvester/Processor Options HTH622B HTH623C HTH624C Weight Excluding Links and Some Options 4,664 lb. (2120 kg) 6,160 lb. (2800 kg) 7,510 lb. (3386 kg) Maximum Feed Roller Opening 29 in. (73 cm) 35 in. (90 cm) 33 in. (85 cm) Maximum Delimb Opening: Top Knives 25 in. (64 cm) 28 in. (70 cm) 30 in. (76 cm)

14 Uptime that won t let you down. Dependability. It s one of the things we like most about the KH-Series. These machines are made for maximum uptime, starting with an intuitive, easy-to-read, full-color LCD monitor that provides onboard diagnostics, gauges, and vital system status lights. Then there are the longer-lifespan switches, the protective hood, and the dual-swing drives that cut down on wear. The harvester doesn t disappoint and won t keep you waiting. Logging isn t easy. Of course, nobody ever said it would be. And when it comes down to it, you re okay with that. But when you ve got a tough job to do, you need equipment. We re proud to say our KH-Series Tracked Harvesters fit the bill. Another downward trend, a positive one, is lower operating costs. The KH-Series provides easy access to components ad compartments to minimize maintenance time. Its superior design keeps you running longer. And its best-in-class fuel economy means fill-ups won t drain your budget Our Sealed Switch Module (SSM) lasts ten times longer than traditional dash switches and it s easy to see and reach The intuitive ROPS post-mounted, full-color LCD is easy to navigate, well lit for night use, and starts up immediately. Even in cold weather. 3. KH-Series hoses are routed to maximize flow and minimize potentially harmful heat build up. 3

15 Stronger, reinforced steel hood keeps internal components safe from falling objects. Low-velocity cooling system, designed to accommodate engine heat loads, minimizes the draw of debris. Two swing drives keep loads evenly distributed to prevent damage. Reduced fuel consumption. The auto-idle feature conserves fuel during non-productive times, and the hydraulic reversing fan draws just enough power to meet cooling requirements. Easier maintenance. The KH-Series offers easy access to the engine and pump compartment and all major compartments, including rollers. Maintenance work that used to cost you a day takes just an hour. Smart design. From adjustable thrust bearings that keep the tilt mechanism tight to an in-tank hydraulic filtration with spin-on filters for fewer filter changes and superior dirt capture, the KH-Series is as reliable as it is rugged. An unmatched dealer network. When you have a Deere, you have the entire John Deere network at your disposal.

16 903KH / 909KH Engine 903KH / 909KH Manufacturer and Model John Deere PowerTech Plus 6090H Non-Road Emission Standards Meets EPA Tier 3 regulations and CARB emissions Cylinders 6 Displacement 549 cu. in. (9.0 L) Standard Engine: Peak Power at 1,900 rpm 300 hp (224 kw) Net Power (ISO9249) at 2,000 rpm 267 hp (199 kw) Net Peak Torque at 1,500 rpm 937 lb.-ft. (1270 Nm) Optional Engine: Peak Power at 1,900 rpm 330 hp (246 kw) Net Power (ISO9249) at 2,000 rpm 286 hp (214 kw) Net Peak Torque at 1,500 rpm 1,027 lb.-ft. (1392 Nm) Air Cleaner Dual-stage dry type with safety element, aspirated Cooling Fan Type Suction type, hydraulically driven, variable speed, reversing Powertrain 903KH 909KH Travel Speed, Forward and Reverse: High 2.6 mph (4.2 km/h) 2.6 mph (4.2 km/h) Low 1.2 mph (2.0 km/h) 1.2 mph (2.0 km/h) Tractive Effort: Standard, Heavy Duty 55,700 lbf (248 kn) 74,300 lbf (331 kn) Travel Brakes Sealed, wet, multi-disc, automatic application, integral with track-drive gearboxes Hydraulics 903KH / 909KH Main Pump: Variable-displacement, axial-piston Maximum Rated Flow 125 gpm (475 L/min.) Attachment Pump: Dedicated axial-piston Maximum Rated Flow 30 gpm (114 L/min.) Oil Filtration 2 main return filters, 10-micron return with bypass and one case drain strainer, 25 micron Cylinders (fixed stick) 903KH 909KH Boom (2): Bore 5.1 in. (130 mm) 5.1 in. (130 mm) Rod Diameter 3.7 in. (95 mm) 3.7 in. (95 mm) Stroke 43.3 in. (1100 mm) 43.3 in. (1100 mm) Closed Length 67.2 in. (1708 mm) 67.2 in. (1708 mm) Arm (1): Bore 5.1 in. (130 mm) 5.1 in. (130 mm) Rod Diameter 3.7 in. (95 mm) 3.7 in. (95 mm) Stroke 43.3 in. (1100 mm) 43.3 in. (1100 mm) Closed Length 67.2 in. (1708 mm) 67.2 in. (1708 mm) Leveller (2): Bore N/A 7.0 in. (178 mm) Rod Diameter N/A 4.0 in. (102 mm) Stroke N/A 22.3 in. (566 mm) Closed Length N/A 44.3 in. (1124 mm) Electrical Voltage 24 volt 24 volt Batteries 2 x 12 volt 2 x 12 volt Alternator Rating 100 amp 100 amp Work Lights Halogen (9 flood and 5 spot) Halogen (10 flood and 5 spot) 16 17

17 Undercarriage 903KH 909KH Track Shoes, Single-Bar Grouser, Clipped Corner, 24 in. (610 mm) 24 in. (610 mm) Heavy Duty, Open Center Track Chain, Heavy Duty 8.5 in. (215.9 mm) 8.5 in. (215.9 mm) Optional 8.0 in. (203.2 mm) N/A Carrier Slides (per side) 2 bolt-on 2 bolt-on Track Rollers (per side) 9 (tractor type) 10 (tractor type) Optional 8 (tractor type) N/A Track Guides, Integral, Thick High-Abrasion-Resistant Material 1.0 in. (25 mm) 1.0 in. (25 mm) Track Adjustment Hydraulic Hydraulic Leveling Mechanism Forward N/A 26 deg. Side / Side N/A 14 deg. Rearward N/A 7 deg. Swing Mechanism 903KH / 909KH Rotation (continuous) 360 deg. Swing Speed (maximum) 6.0 rpm Swing Brake Sealed, wet, multi-disc Ground Pressure Data 903KH 909KH As per SAE J1309, Less Attachment Standard Undercarriage: Double Grouser, Heavy Duty 24 in. (610 mm) 8.7 psi (60.2 kpa) 9.9 psi (68.4 kpa) 30 in. (760 mm) 7.1 psi (49.2 kpa) N/A Single Grouser, Clipped Corner, Heavy Duty: 24 in. (610 mm) 8.7 psi (60.2 kpa) 9.9 psi (68.4 kpa) 28 in. (710 mm) 7.6 psi (52.4 kpa) 8.6 psi (59.2 kpa) Serviceability 903KH / 909KH Refill Capacities: Fuel Tank 295 gal. (1117 L) Cooling System 12.9 gal. (48.9 L) Engine Lubrication, Including Filter 8.2 gal. (31.0 L) Hydraulic Reservoir Capacity 82 gal. (311 L) Swing-Drive Gearbox (each) 1.2 gal. (4.5 L) Track-Drive Gearbox (each) 1.3 gal. (4.8 L) Operating Weights 903KH 909KH Includes standard equipment, half-full fuel tank, all fluids, 175-lb. (80 kg) operator, less attachment Standard Undercarriage 65,890 lb. ( kg) 79,040 lb. ( kg) Optional Undercarriage 60,700 lb. ( kg) N/A Processing/Harvesting Head Information HTH622B HTH623C HTH624C Maximum Cutting Capacity 30.0 in. (762 mm) 29.5 in. (750 mm) 29.5 in. (750 mm) Maximum Delimbing Capacity 25.0 in. (635 mm) 28.0 in. (711 mm) 30.0 in. (762 mm) Feeding Mechanism 3 rollers, fully synchronized hydraulic drive 3 rollers, fully synchronized hydraulic drive 3 rollers, fully synchronized hydraulic drive Dimensions: Width (arms open) 67.0 in. (1702 mm) 79.0 in. (2007 mm) 78.7 in. (2000 mm) Height (including rotator)?? in. (?? mm)?? in. (?? mm) in. (3300 mm) Weight 4,664 lb. (2120 kg) excluding links 6,160 lb. (2800 kg) excluding links 7,466 lb. (3386 kg) including rotator and link Saw equipped with automatic chain tensioner system. (See individual Harvesting Head brochure for details.)

18 Boom Performance 903KH / 909KH Maximum Reach to Attachment Pin 29 ft. 0 in. (8.84 m) Minimum Reach to Attachment Pin 12 ft. 5 in. (3.79 m) Lift Capacity (bare pin at full reach) 14,000 lb. (6350 kg) Lift Capacity (bare pin at 20 ft. [6.1 m]) 19,900 lb. (9025 kg) 903KH Track Harvester 909KH Track Harvester 10.0M 10.0M 9.0M 8.0M 7.0M 6.0M 5.0M CENTERLINE OF SWING 9.0M 8.0M 7.0M 6.0M 5.0M CENTERLINE OF SWING 4.0M 4.0M 3.0M 3.0M 2.0M 2.0M 1.0M 0.0M GROUND LINE 1.0M 0.0M GROUND LINE -1.0M -1.0M -2.0M 10.0M 9.0M 8.0M 7.0M 6.0M 5.0M 4.0M 3.0M 2.0M 1.0M 0.0M -2.0M 10.0M 9.0M 8.0M 7.0M 6.0M 5.0M 4.0M 3.0M 2.0M 1.0M 0.0M Machine not exactly as shown. Illustrations for dimensioning purposes only.

19 Machine Dimensions 903KH 909KH A Overall Height: with HTH624C with HTH624C Top of Cab without Skylight 11 ft. 9 in. (3.58 m) N/A Top of Cab with Skylight 12 ft. 8 in. (3.86 m) 13 ft. 1 in. (4.00 m) Top of Boom 15 ft. 8 in. (4.77 m) 16 ft. 4 in. (4.98 m) B Overall Track Length 15 ft. 5 in. (4.69 m) 16 ft. 2 in. (4.92 m) C Track Length (idler to sprocket center) 11 ft. 10 in. (3.62 m) 12 ft. 7 in. (3.83 m) D Tail Swing (from swing center): Standard Counterweight 10 ft. 0 in. (3.05 m) 10 ft. 0 in. (3.05 m) Optional Counterweight 10 ft. 7 in. (3.23 m) 10 ft. 7 in. (3.23 m) E Reach (to attachment pin): Maximum Reach 29 ft. 0 in. (8.84 m) 29 ft. 0 in. (8.84 m) Minimum Reach 12 ft. 5 in. (3.79 m) 12 ft. 5 in. (3.79 m) F Ground Clearance: Single Grouser 29 in. (735 mm) 30 in. (769 mm) Double Grouser 28 in. (701 mm) 29 in. (735 mm) G Upperstructure Width 9 ft. 9 in. (2.97 m) 10 ft. 6 in. (3.20 m) H Track Gauge 8 ft. 5 in. (2.56 m) 8 ft. 11 in. (2.72 m) I Width Over Tracks: 24-in. (610 mm) Track Shoes 10 ft. 5 in. (3.17 m) 10 ft. 11 in. (3.33 m) 28-in. (711 mm) Track Shoes 10 ft. 9 in. (3.27 m) 11 ft. 3 in. (3.43 m) 30-in. (760 mm) Track Shoes 10 ft. 11 in. (3.32 m) N/A G 903KH Track Harvester A E C B D H I F G 909KH Track Harvester F 30 in. (770 mm) A Leveling Capability 909KH Forward 26 deg. Rear 7 deg. Side 14 deg. E C B D H I F Machine not exactly as shown. Illustrations for dimensioning purposes only

20 WE WORK FOR THE GUYS WHO LOOK DOWN ON THE CLOUDS. Logging is a way of life. A calling passed through generations. One that gets in your blood and takes everything you ve got. But one that you ll never give up. And that s why we re dedicated to providing equipment and solutions specifically for the work you do. It s our way of making one of the toughest jobs in the world just a little bit easier. So see your dealer or call At John Deere, We re For Loggers. JohnDeere.com/forestry DKB900KHTH Litho in U.S.A. (10-03)