Options Hydraulic quick hitch circuit Hydraulic tilt circuit

Transcription

1 TILTING DITCHING BUCKET POWERTILT TILTING COUPLER Single large bore double acting ram Cover plate for ram protection Replaceable bushes on main pivot Greaseable pivot pin Up to 180 degrees of tilt Use with any attachment, even narrowest trenching bucket Built in quick hitch No external rams Built in hydraulic overload protection MODEL MAXIMUM APPROXIMATE TOTAL TILT REQUIRED CIRCUIT MACHINE POWERTILT OIL FLOW PRESSURE WEIGHT KG WEIGHT KG - L/MIN RANGE MACHINE PART NO. WIDTH B CAPACITY 4.5 1, WEIGHT (MM) 6N 3, to 4 Ton 166T/48 50 " W 4, to 9 Ton 003T/60 60 " , Bar 9 to 12 Ton 150T/60 60 " 0.23 (Applies to 8 9, all models) 13 to 15 Ton 184T/72 72 " , to 19 Ton 297T/72 72 " , to 27 Ton 286T/84 84 " , x double acting low flow circuit 12 34, Quick Hitches Powertilt Tiltrotator Abiljo, England Hydraulic quick hitch circuit Hydraulic tilt circuit 1 x double acting low flow circuit (all models) + hitch circuit for hydraulic coupler models Tilting Ditching Bucket Tiltrotator Helac Corporation / Exac-One Ltd (USA / England) page 6 page 7

2 TILTROTATOR TILTROTATOR Continuous Rotation 80 degrees of tilt Choice of top mountings Choice of hydraulic quick hitches to underside Additional hydraulic circuits for grab operation etc. Continuous Rotation 80 degrees of tilt Choice of top mountings Choice of hydraulic quick hitches to underside Additional hydraulic circuits for grab operation etc. MODEL EC 02 EC 05 A MODEL EC 10 EC 15 EC 20 EC 30 WIDTH A (MM) WIDTH A (MM) WIDTH B (MM) WIDTH C (MM) E WIDTH B (MM) WIDTH C (MM) TOTAL LENGTH D (MM) B C D TOTAL LENGTH D (MM) BUILD HEIGHT E (MM) BUILD HEIGHT E (MM) WEIGHT From 65 From 125 WEIGHT From 250 From 340 From 440 From 850 TILT 2x40 2x40 TILT 2x40 2x40 2x40 2x40 OIL FLOW REQUIRED (L/MIN) OIL FLOW REQUIRED (L/MIN) WORK PRESSURE (L/MIN) WORK PRESSURE (L/MIN) MACHINE WEIGHT (TONNES) MACHINE WEIGHT (TONNES) ROTATION Infinite Infinite ROTATION Infinite Infinite Infinite Infinite OPTIONAL GRAB TYPE *DEPENDING ON MODEL - 05 or 10 OPTIONAL GRAB TYPE *DEPENDING ON MODEL or EC02/05 Grabs TYPE MAXIMUM WIDTH LENGTH WEIGHT MAX. GRAB WIDTH A B C (MM) HYDRAULIC (MM) (MM) PRESSURE A B EC10/30 Grabs TYPE MAXIMUM WIDTH LENGTH WEIGHT MAX. GRAB WIDTH A B C (MM) HYDRAULIC (MM) (MM) PRESSURE C Hoses (without q/r couplings) 1 x single acting circuit (all models) Hoses (without q/r couplings) 1 x single acting circuit (all models) Standard installation kit c/w stere-strip controls Integrated grab Replacement multi button joysticks Integrated proportional control Tilting ditching bucket Powertilt Engcon (Sweden) Standard installation kit c/w stere-strip controls Integrated grab Replacement multi button joysticks Integrated proportional control Tilting ditching bucket Powertilt Engcon (Sweden) page 8 page 9

3 V BUCKETS RIDDLE BUCKETS Manufactured from high grade steel Are custom made to individual requirements Made to order based on dimensions A-B-C Abiljo (England) Description Riddle Buckets are available for 1 to 40 ton excavators for the sorting of materials on site. The information given below indicates examples of the standard sizes that are normally used, although buckets to any size and specification can be manufactured. All riddle buckets are fitted with Kingmett teeth as standard. Riddle buckets are manufactured using two different methods depending on the size of the carrier machines: Smaller buckets are manufactured with a thicker than standard back plate, that then have the holes profiled into it, whilst for larger machines, individually profiled riddles are spaced to the required gap and are then welded into place with two supporting cross bars added to give additional strength. A B MODEL MACHINE WIDTH FLOOR TYPE FLOOR / RIDDLE STANDARD WEIGHT (INCHES) THICKNESS GAP (TONNES) (MM) (INCHES) C ED0/24R(S) Profiled 8 2 ED1/30R(S) Profiled 8 2 ED2/30R(S) Profiled ED3/36R(S) Ribbed ED4/36R(S) 5-6 and Backhoes 36 Ribbed ED5/42R(S) Ribbed ED6/42R(S) Ribbed /R48S Ribbed R54S Ribbed R60S Ribbed R66S Ribbed Abiljo (England) page 12 page 13

4 POWERGRIP BUCKET CRUSHA BUCKET Range of excavator mounted 4 in 1 type buckets to suit excavators from 5 tonnes to 20 tonnes. Powergrip incorporates Helac Corporation s proven helical rotary actuator which ensures constant gripping and holding force and maximum safety. 120 degrees of jaw movement and excellent holding torque gives superb versatility on a range of digging and handling jobs. No external cylinders or moving parts ensures maximum durability and minimum maintenance. MODEL WIDTH (MM) TYPE MACHINE POWERGRIP HEAPED WEIGHT WEIGHT CAPACITY (M3) (TONNES) PG T 600 Trenching PG T 600 Trenching PG T 750 Trenching PG T 600 Trenching PG T 750 Trenching PG T 900 Trenching PG T 600 Trenching PG T 750 Trenching PG T 900 Trenching PG T 1200 Trenching PG T 750 Trenching PG T 900 Trenching PG T 1050 Trenching PG T 1200 Trenching PG T 1200 Ditching PG T-DM 1500 Ditching x double acting circuit Integral check valve Integral cross line pressure relief valve Cat type teeth Mounting bracket Ditching bucket includes two bolt on cutting edges A range of low impact jaw type crusher buckets to suit excavators from 2.5 tonnes - 10 tonnes. These buckets will process stone, brick, concrete (with or without re-inforcing), etc to re-usable materials. The size of the output material can be regulated over a nominal range of 50mm - 100mm using the supplied adjustment plates. Advanced hydraulics provide a fully automatic reciprocating action to the jaw, operating off the excavator's standard single acting breaker circuit. MODEL CB25 CB40 CB80 EXCAVATOR WEIGHT (TONNES) DIM A (MM) DIM B (MM) DIM C (MM) DIM D (MM) DIM E (MM) NOMINAL PRODUCT SIZE F (MM) <50/<75/<100 <50/<75/<100 <50/<75/<100 WEIGHT OPERATING PRESSURE (BAR) REQUIRED FLOW (L/MIN) JAW CYCLES PER MINUTE CRUSHING RATE (TONNES/HOUR UP TO 5 UP TO 7 UP TO 10 subject to material type - guide only) 1 x single acting circuit Mounting bracket Hoses (no q/r couplings) Anross, England page 14 page 15

5 MIXER BUCKET EXCAVATOR THUMBS Range of concrete/ mortar mixing buckets to suit excavators from 4 tonnes to 12 tonnes. Includes hydraulically operated chute for accurate placing of mixed material and comes complete with electronic changeover valve. Operates off excavators standard double acting breaker circuit. Range of thumbs to suit excavators from 1 tonne to 40 tonnes. This low cost alternative to a grapple can be fitted the the excavator in around four hours. Fitting involves welding the pivot to the inside of the dipper arm. MODEL MIX 150 MIX 200 MIX 250 MIX 350 MACHINE WEIGHT (TONNES) WIDTH (MM) CAPACITY (M3) WEIGHT OIL FLOW REQUIRED (L/MIN) OIL PRESSURE REQUIRED (BAR) MAXIMUM OIL PRESSURE (BAR) DIM A (MM) DIM B (MM) DIM C (MM) MODEL MACHINE WIDTH (MM) HEIGHT (MM) WEIGHT (TONNES) TH TH TH TH TH TH x double acting circuit Mounting Bracket Hoses (excl q/r couplings) Nil Mounting kit Manufactured By Cangini, Italy Abiljo, England page 16 page 17

6 MINI - HAMMER SOLID LEG GRAPPLE Silenced Non accumulator type Interchangeable mounting brackets 3/2 tine standard configuration Excavators bucket ram operates moving jaw No additional equipment required on excavator Suitable for general waste handling to rock handling MODEL MACHINE WIDTH OF WIDTH OF MAXIMUM WEIGHT MOVING STATIC OPENING C (TONNES) JAW A JAW B (APPROX MM) (MM) (MM) SLG A MODEL EXCAVATOR WEIGHT REQUIRED WORKING IMPACT IMPACT LENGTH CLASS OIL FLOW PRESSURE RATE ENERGY (MM) RATE (L/MIN) (BAR) (BPM) (JOULE) SLG20 2 to SLG40 4 to C B MH 10S , MH 20S , MH 30S , MH 40S , MH 43S MH 45S , SLG60 6 to SLG90 9 to SLG to SLG to SLG to SLG to Hoses (no q/r fittings) Mounting bracket (to suit direct mount or quick hitch) 2 standard chisels Tool kit 2 year warranty Wedge Chisel (standard) Moil point Asphalt cutter Post driving kit Quick hitch mount Direct mount Brace arm and brace arm mounting pad Mini-Grapple Orange Peel grab Jisung (South Korea) Abiljo (England) page 18 page 19

7 MINI - GRAPPLE (SORTING GRAB) POM ORANGE PEEL GRAB Grab arms manufactured from Hardox Grab hoses protected inside grab body Light weight Integral fixed head rotator Bolt on cutting edges POM Grab for stone and rocks MODEL TEETH MAX WEIGHT MAX A B C D E ø FxG LOAD BAR MODEL EXCAVATOR WEIGHT MAX. CAP A B C TEETH CLOSING MAX. WEIGHT BAR LT (OPTIONAL) FORCE LOAD UP TO N (TONNES) POM-3/ x80 POM-4/550-P x100 POM-5/1000P x150 MG MG MG I FxG MG D C Mounting bracket (2 pin or dedicated coupler type) A B E Bolt on teeth Bolt on sideplates (to create clamshell bucket) to operate from one double acting circuit) Available with or without rotator 1 x double acting circuit if used with diverter control kit 2 x double acting circuit if used without diverter control kit Powertilt Tiltrotator Quick hitches Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) page 20 page 21

8 PFO ORANGE PEEL GRAB PFO/P ORANGE PEEL GRAB PFO Compact grab for general purpose use including scrap metal and urban waste PFO/P Heavy duty compact grab MODEL TEETH CAP. WEIGHT MAX A B C D E ø FxG MAX LT BAR LOAD PFO-4/ x PFO-5/ x PFO-4/ x PFO-4/ x MODEL TEETH CAP. WEIGHT MAX A B C D E ø FxG MAX LT BAR LOAD PFO-5/400-P x PFO-6/400-P x PFO-5/600-P x PFO-6/600-P x PFO-5/ x PFO-5/ x PFO-6/ x PFO-4/ x PFO-5/ x PFO-6/ x PFO-5/ x PFO-6/ x Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) page 22 page 23

9 PFV/P ORANGE PEEL GRAB LOG GRAB PFV/P Extra heavy duty grab with vertical cylinders Compact general purpose timber / log grab with special anti-yield jaws MODEL TEETH CAP. WEIGHT MAX A B C D E ø FxG MAX LT BAR LOAD PFV-5/500-P x PFV-6/500-P x PFV-5/650-P x PFV-6/650-P x MODEL CAP./M2 WEIGHT A B C D E F G MAX LOAD PTO-200/S PTO-300/S PTO-400/S PTO-550/S PFV-5/800-P x PFV-6/800-P x PFV-6/1000-P x C F B A D G E Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) Short arm version (can be used in conjunction with fixed head rotator for pole / column erecting) Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) Tiltrotator page 24 page 25

10 KERB - GRIP VEGETATION GRAB Constructed from Weldox 700 Check valve on ram Fixed jaw has nylon blade to separate kerbs in the pack Grab for handling bulky vegetation MODEL RECOMMENDED CARRIER KERB TYPES RATED CAPACITY KERB-GRIP LIGHT Excavators under 2 tonnes 10x5 s, radius, taper, 80kg half batter, natural stone KERB-GRIP-STANDARD Excavators over 2 tonnes 10x5 s, radius, taper, 80kg and truck cranes half batter, natural stone MODEL TEETH WEIGHT MAX A B C D E MAX BAR LOAD FLO FLO FLO KERB-GRIP SUPER Excavators over 3 tonnes 10x5 s, large granite, beany, 400kg and truck cranes conservation, trieffe, bus stop Direct mount Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) page 26 page 27

11 BMV-P CLAMSHELL BUCKET BM0-P CLAMSHELL BUCKET BMV-P Heavy duty clamshell with two vertical cylinders suitable for digging and loading BMO-P Heavy duty clamshell with two horizontal cylinders MODEL CAP/LT WEIGHT MAX. MAX A B C D E MAX LOAD BAR LOAD BMV-2 / 1000-P , BMV-2 / 1300-P , BMV-2 / 1500-P , MODEL CAP/LT WEIGHT MAX A B C D E MAX BAR LOAD BMO-500/P BMO-700/P BMO-1000/P BMO-1200/P BMO-1500/P BMO-2000/P Direct mount Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) Direct mount Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) page 28 page 29

12 BL CLAMSHELL BUCKET BMV-2 CLAMSHELL BUCKET BL Range Light / medium duty Clamshell for material handling BMV-2 Clamshell with vertical cylinders suitable for digging MODEL CAP/LT WEIGHT A B C D E MAX LOAD BL BL BL MODEL CAP/LT WEIGHT A B C D E MAX LOAD BMV-2/200-S BMV-2/ BMV-2/ BMV-2/ Direct mount Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) Direct mount Single pin mounting link Quick hitch mounting plate to operate from one double acting circuit) page 30 page 31

13 ENGCON COMPACTOR RF COMPACTOR Compact dimensions Interchangeable mounting plates Sideplates for levelling material and protection of vibrator unit Compact dimensions Interchangeable mounting plates MODEL COMPACTION WEIGHT LENGTH WIDTH HEIGHT COMPACTION HYDRAULIC FREQUENCY FORCE EXCL. A (MM) B (MM) C (MM) AREA (M2) FLOW (L/MIN) (HZ) MOUNTING PP PP PP MODEL EXCAVATOR WIDTH WEIGHT COMPACTION OIL FLOW CLASS (MM) FORCE REQUIRED (UP TO) (L/MIN) MAV 01 8 Ton MAV Ton MAV Ton MAV Ton MAV Ton MODEL EXCAVATOR WIDTH WEIGHT COMPACTION OIL FLOW CLASS (MM) FORCE REQUIRED (UP TO) (L/MIN) C MAV Ton B A MAV 0245/50 17 Ton MAV Ton MAV Ton MAV Ton x single acting circuit minimum 1 x single acting circuit minimum Hoses Flow control valve Engcon (Sweden) Hoses Flow control valve Hydraulic underhitch for removal of compactor baseplate and attachment of riddle buckets, tamper units etc. (baseplate and attachment are additional weight and price) RF Systems (Sweden) page 32 page 33

14 TARMAC/CONCRETE PLANER ROTARY DRUM CUTTER Swinging mounting plate ensures constant cutting depth Ideal for planing on horizontal, vertical and inclined surfaces Excellent guarding prevents material fly off Low vibration and low noise option for cutting rock, concrete, asphalt and timber Quicksnap pick retainer for quick pick changes (on some models only) MODEL PLB 200 PLB 300 PLB 450 PLB 600 STANDARD DRUMS CUT WIDTH MM CUT DEPTH MM TEETH (DRUM FOR CONCRETE) NR 30 (40) 36 (42) 48 (66) 60 (78) AVERAGE PLANING SPEED (1) * (STANDARD DRUM 50% DEPTH) MIN. DISTANCE FROM PAVEMENT (MM) 40 (20*) 50 (25*) 60 (30*) 65 (30*) ROTATION ANGLE OF THE SWINGING SUPPORT OPERATING WEIGHT REQUIRED OIL FLOW RATE (L/MIN) REQUIRED OIL PRESSURE (2) BAR MODEL DRUM CUTTING OIL FLOW MAX TORQUE MAX CUTTING WEIGHT RECOMMENDED DIAMETER WIDTH (L/MIN) OUTPUT AT FORCE AT APPROX. CARRIER WEIGHT (MM) (MM) 350 BAR 350 BAR (T) (N/M) (N) SERIES ER SERIES ER SERIES ER SERIES ER SERIES ER SERIES ER 1500 S SERIES ER SERIES ER SERIES ER EXCAVATOR WEIGHT (APPROX.) (3) TON (1) Planing speed is affected by the hardness of the material to be planed, by planing depth and by the available hydraulic pressure (2) The pressure must be in inverse relation to the available flow rate and vice versa (3) The user is responsible for checking that the prime mover meets the equipments specification and weight requirements (*) On request 1 x single acting circuit (+1 x dedicated case drain line 450 & 600 models only) Mounting plate Concrete Drum Special Drums on Request Simex (Italy) 1 x single acting circuit & I x dedicated case drain line Mounting plate, hoses Vertical cutting head series ER250 ER1500 Stump grinding drum Picks choice for materials from asphalt to hard rock Erkat (Germany) page 34 page 35

15 MINI - MOWER FORESTRY MOWERS Weldox 700 construction for maximum durability Direct drive motor for maximum power Fits all mini and midi excavators Weldox 700 construction for maximum durability Volvo piston motors Rail approved Hydraulic front cover Mini-Forest MODEL EXCAVATOR ROTOR MOTOR CUT MATERIAL WEIGHT PRESSURE FLOW WEIGHT WIDTH DIA. (CM) (BAR) (L/MIN) RANGE (T) (CM) MODEL TO FIT CUT WIDTH MAX. MATERIAL WEIGHT REQUIRED OIL REQUIRED OIL EXCAVATOR (CM) DIAMETER PRESSURE FLOW RATE FROM (CM) (BAR) (L/MIN) TE 60 DL 1.0 tonnes TFL drum rotor with heavy 34cc hammers piston motor TFL drum rotor with heavy 40cc /80 hammers piston motor TE 80 DP 2.5 tonnes TE 100 DP 3.5 tonnes TE 120 DP 4.5 tonnes TE 100 CL 5.5 tonnes TE 120 CL 5.5 tonnes Midi-Forest MODEL EXCAVATOR ROTOR MOTOR CUT MATERIAL WEIGHT PRESSURE FLOW WEIGHT WIDTH DIA. (CM) (BAR) (L/MIN) RANGE (T) (CM) TFM drum rotor 60cc with heavy 102/80 piston motor hammers 1 x single acting circuit Mounting plate Hoses Flow control valve Type E rotor (CL models only) for heavy duty applications Mechanical floating system TFM drum rotor 60cc with heavy 102/80 piston motor hammers TFM drum rotor 60cc with heavy 102/80 piston motor hammers TFM-UX fixed tool rotors 60cc with reversible teeth piston motor TFM-UX fixed tool rotors 60cc with reversible teeth piston motor Osma (Italy) page 36 page 37

16 FORESTRY MOWERS OSMA MOWERS Weldox 700 construction for maximum durability Rail approved Maxi-Forest MODEL EXCAVATOR ROTOR MOTOR CUT MATERIAL WEIGHT PRESSURE FLOW WEIGHT WIDTH DIA. (CM) (BAR) (L/MIN) RANGE (T) TFS drum rotor 60cc mm diameter, piston motor with heavy hammers MODEL EXCAVATOR CUT WIDTH MATERIAL WEIGHT PRESSURE FLOW WEIGHT (CM) DIAMETER (BAR) (L/MIN) RANGE (T) (CM) TE120/CP TE160/CP TFS drum rotor 60cc mm diameter, piston motor with heavy hammers TFS drum rotor 60cc mm diameter, piston motor with heavy hammers TFS-UX fixed tool rotors 60cc with reversible teeth piston motor TFS-UX fixed tool rotors 60cc with reversible teeth piston motor TFS-UX fixed tool rotors 60cc with reversible teeth piston motor MODEL EXCAVATOR CUT WIDTH MATERIAL WEIGHT PRESSURE FLOW WEIGHT (CM) DIAMETER (BAR) (L/MIN) RANGE (T) (CM) LD1000 For "Spider" type excavators HD1000 For "Spider" type excavators HD1200 For "Spider" type excavators 1 x single acting circuit minimum 1 x single acting circuit minimum Mounting plate Hoses Digital revolution counter kit Osma (Italy) Mounting plate Hoses Piston motor Rotor type E (TE120CP only) for heavy duty applications Mechanical floating link (TE/CP models only) Open rotor (HD models only) Digital revolution counter kit Osma (Italy) page 38 page 39

17 STUMP PLANER TREE SHEAR 3 blade design for optimum cutting performance Designed for use with Mini-Auger and Auger Torque auger drive units (contact Exac-One for info on suitable drive units) Models SP mm diameter 500mm long SP mm diameter 500mm long SP mm diameter 500mm long SP mm diameter 500mm long Manufactured from 26mm high tensile steel Single 32mm blade eliminates complicated adjustments and maintenance Unique serrated jaw holds tree during cutting cycle 110 degree hydraulic rotation Cut or trim standing trees up to 350mm diameter Cut fallen trees into firewood Can be used as grab for re-handling cut timber MODEL TIMBERLINE 350 TIMBERLINE 250 HYDRAULIC DRIVEN HYDRAULIC DRIVEN BLADE TYPE SINGLE BLADE SINGLE BLADE (30 MM MINIMUM THICKNESS) (25 MM MINIMUM THICKNESS) MAXIMUM ROTATION 110 DEGREES 110 DEGREES MAXIMUM MATERIAL THICKNESS AT 190 BAR 350 MM 250 MM MAXIMUM OIL PRESSURE 205 BAR 205 BAR EQUIPPED WITH A SERRATED TOOTH HOLDING DEVICE YES YES ABILITY TO SHARPEN BLADE WITHOUT REMOVING YES YES CYCLE TIME AT 90 LPM 4.5 SECONDS 4.5 SECONDS WEIGHT 567 KG 255 KG CYLINDER TYPE WELDED WELDED CYLINDER BORE 130 MM 85 MM CYLINDER ROD 75 MM 50 MM CYLINDER PORTS 15 MM 15 MM VALVE PORTS 15 MM 15 MM PIN TYPE 36 MM CHROMED 36 MM CHROMED CLEVIS TYPE EXTRA HEAVY DUTY EXTRA HEAVY DUTY LENGTH DIM A (MM) WIDTH DIM B (MM) HEIGHT DIM C (MM) x single acting circuit Mini-Auger Auger Torque Auger Torque (England) 2 pin mounting bracket (to suit direct mount or quick hitch) Mini-Mower Osma Range Forestry Range Sidney Manufacturing Inc (USA) page 40 page 41

18 STEEL SHEAR CONCRETE PULVERISOR Hardox construction for maximum durability Compact dimensions Hardox construction for maximum durability Compact dimensions MODEL SCR 250 EXCAVATOR WEIGHT (TONNES) WEIGHT IN WORKING CONDITIONS 250 A (MM) 236 B (MM) 230 L1 (MM) 820 L2 (MM) 1050 CYLINDER FORCE (TONNES) 26 21O (BAR) 62 21O (BAR) 30 21O (BAR) 20 WORKING PRESSURE (BAR) 210 ROTATION HYDRAULIC 360 Hydraulic rotation Mounting plate Hoses to operate from one double acting circuit) Concrete pulverisor Socomec (Italy) MODEL PDO 200 PDO 300 PDO 650 WEIGHT IN WORKING CONDITIONS A (MM) B (MM) C (MM) D (MM) E (MM) CYLINDER FORCE (TONNES) CRUSHING FORCE (TONNES) CUTTER FORCE (TONNES) MAX. PRESSURE (BAR) WORKING PRESSURE (BAR) OIL FLOW (L/MIN) ROTATION HYDRAULIC 360 ROTATION PRESSURE (BAR) ROTATION OIL FLOW (L/MIN) EXCAVATOR WEIGHT (TONNES) Hydraulic rotation Mounting plate Hoses to operate from one double acting circuit) Steel shear Socomec (Italy) page 42 page 43

19 ROTARY SCREENING BUCKET MINI - AUGER Hardox screens for maximum durability Rotary screening action Shallow pitch auger flights ensure maximum soil removal Shock Lock system increase life of Tungsten Teeth Augers manufactured using heavy wall tubing for maximum durability MODEL SBV 300 SBV 400 SBV 800 SBV 1350 SBV 1650 SBV 1950 EXCAVATOR WEIGHT (TONNES) WEIGHT IN WORKING CONDITION A (MM) B (MM) C (MM) D (MM) L (MM) SAE CAP (CUBIC METRE) WORKING PRESSURE (BAR) OIL FLOW (L/MIN) MODEL 1200 X Max 5500 Max 7000 OUTPUT SHAFT SIZE (MM) OUTPUT SHAFT SHAPE (MM) Round Round Round Square Square EXCAVATOR WEIGHT (TONNES) AUGER RANGE S2 S4 S4 S5 S5 DRILLING DIAMETER (MM) MAX. TORQUE (NM) MAX. PRESSURE (BAR) REQUIRED OIL FLOW (L/MIN) HYDRAULIC HOSES 1/2" BSP 1/2" BSP 1/2" BSP 1/2"BSP 1/2" BSP WEIGHT RPM HYDRAULIC CONNECTORS 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" Mounting plate Hoses Material grading options through interchangeable screens Socomec (Italy) P.T.O. for more information page 44 page 45

20 CHAIN TRENCHER DIGA - BARA Spring loaded trench cleaner Chain options for different trench widths and ground conditions Models T600 (600mm dig depth) T900 (900mm dig depth) Mechanical tip no hydraulics Attaches to excavator in seconds using single pin Skip lock release lever operated by excavator bucket Virtually maintenance free Standard models to suit excavators up to 2 tonnes Easily transportable on trailer or pick up Models 1150 (1150mm wide) 1300 (1300mm wide) 1400 (1400mm wide) Specification Width (see models) (a) Overall length 2170mm (c) Height 1020mm (b) Skip Length 1000mm (d) Skip depth 400mm Max gross weight 600kg Lifting Eye (e) D B E Nil Single pin mounting kit Larger models custom built to order only C A 1 x single acting circuit minimum Requires 40l/m at 150 Bar J C Engineering (England) 2 pin mounting bracket (to suit direct mount or quick hitch) 150/100mm General Purpose Earth / Tungsten chain (Cuts 150mm trench as supplied when spacers are removed cuts 100mm trench) 150/100mm earth chain 150/100mm tungsten chain 200mm earth chain 200mm Tungsten chain Auger Torque Ltd (England) page 50 page 51

21 KERB - KARRY RAIL ATTACHMENTS Attaches to excavator in seconds using single pin Virtually maintenance free. Standard models to suit excavators up to 10 tonnes Easily transportable MODEL A B C D E F G MAX. GROSS PACKS OF (MM) (MM) (MM) (MM) (MM) (MM) (MM) WEIGHT STD. KERBS CARRIED KERB-KARRY KERB-KARRY We offer an extensive range of attachments for rail applications Please contact us for further information Models PFS-80/C Hydraulic Tamper unit PFS-55/TL Railway Sleeper grab (medium duty) PFS-55/TP Railway Sleeper grab (heavy duty) PFS-70/R Railway Track grab (medium duty) PFS-140/R Railway Track grab (heavy duty) Clamshell Buckets for Wet Bedding Single pin, two pin or dedicated coupler mounting options PFS-70/R PFS-55/TL PFS-80/C Nil Single pin mounting kit Kerb-Grip Kerb-Krawler System BMV-2/250 page 52 page 53

22 HEAVY DUTY RAKES RIPPER Range of heavy duty rakes to suit excavators from 1 tonne to 28 tonnes. Manufactured to customers own specification from Hardox 400. Range of rippers to suit excavators from 1 tonne to 80 tonnes. Manufactured from Hardox 400 to suit either quick hitch or direct mount applications. MACHINE WEIGHT (TONNES) All rakes are made to customers requirements LEG MATERIAL 25mm HARDOX 25mm HARDOX 30mm HARDOX 30mm HARDOX 40mm HARDOX 40mm HARDOX Price will depend on Dim D and the number of legs required. MODEL MACHINE DIM A (MM) SHANK TOOTH WEIGHT (TONNES) MATERIAL SYSTEM R mm Hardox 400 Cat 428 R mm Hardox 400 Cat 428 R mm Hardox 400 Cat 205 (J250) R mm Hardox 400 Cat 205 (J250) R mm Hardox 400 Cat 215 (J300) R mm Hardox 400 Cat 225 (J350) R mm Hardox 400 Cat 225 (J350) R mm Hardox 400 Cat 235 (J460) R mm Hardox 400 Cat 245 (J550) R mm Hardox 400 Cat 245 (J550) Nil A Nil Manufactured By Abiljo, England Abiljo, England page 54 page 55

23 PALLET FORKS Range of mounted pallet forks to suit excavators from 2 tonnes to 12 tonnes and with capacities from 500kgs to 1500kgs. The fork carriage design allows for quick sideways adjustment of individual forks or for their complete removal. MODEL DIM A DIM B DIM C DIM D DIM E WEIGHT CAPACITY (MM) (MM) (MM) (MM) (MM) FK FK FK FK FK15R (reinforced) B D E C A Mounting plate Nil Nil Nil Cangini page 56 page 57