47/326 Technical Specifications
|
|
|
- Felicity Bryant
- 5 years ago
- Views:
Transcription
1 Manual # /326 Technical Specifications Revision Date IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 5438 Tel: FAX: Website: Copyright 211 Iowa Mold Tooling Co., Inc. All rights reserved No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of Iowa Mold Tooling Co., Inc. Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation company. Printed on 14 December, 211
2
3 i Contents Revisions... ii Technical Data and Charts 3 47/326 Technical Specifications /326 K2 Capacity Chart /326 K3 Capacity Chart /326 K4 Capacity Chart /326 K5 Capacity Chart /326 K6 Capacity Chart /326 K7 Capacity Chart /326 K8 Capacity Chart /326 Dimensional Drawing /326 Stabilizers /326 Swing Clearance...14
4 ii Contents Revisions DATE LOCATION DESCRIPTION Specifications ECN Updated stabilizer wording.
5 3 C HAPTER 1 Technical Data and Charts In This Chapter 47/326 Technical Specifications /326 K2 Capacity Chart /326 K3 Capacity Chart /326 K4 Capacity Chart /326 K5 Capacity Chart /326 K6 Capacity Chart /326 K7 Capacity Chart /326 K8 Capacity Chart /326 Dimensional Drawing /326 Stabilizers /326 Swing Clearance...14
6 4 47/326 Technical Specifications Manual # /326 Technical Specifications 47/ HYDRAULIC 3- HYDRAULIC 4- HYDRAULIC 5-HYDRAULIC 6- HYDRAULIC 7- HYDRAULIC 8- HYDRAULIC Crane Rating* 326,21 ft lb (45.1 tm) 318,975 ft lb (44.1 tm) 316,8 ft lb (43.7 tm) 37,45 ft lb (42.5 tm) 3,17 ft lb (41.5 tm) 298,725 ft lb (41.3 tm) 291,49 ft lb (4.3 tm) Maximum Horizontal 2 11" (8.2 m) 33' 6" (1.2 m) 4' 8" (12.4 m) 47' 3" (14.4 m) 54' 9" (16.7 m) 62' 4" (19. m) 7' 3" (21.4 m) Reach Maximum Vertical Reach 39' 8" (12.1 m) 4 3" (14.1 m) 53' 6" (16.3 m) " (18.3 m) 67' 7" (2.6 m) 75' 2" (22.9 m) 83' " (25.3 m) Maximum Capacity 21,625 lb 21,14 lb 2,55 lb 19,95 lb ( lb 18,96 lb 18,52 lb (981 (959 (93 (882 (86 (84 Max Max Reach 12,6 lb ( lb ( lb ( lb ( lb ( lb ( lb (13 Crane Weight ** 796 lb ( lb ( lb ( lb (442 1,185 lb (462 1,58 lb (48 1,97 lb (4975 Hook Approach Vertical 9' 5" (2.88 m) 9' 1" (2.78 m) 8' 11" (2.73 m) 8' 9" (2.67 m) 8' 7" (2.62 m) 8' 5" (2.56 m) 8' 3" (2.51 m) Horizontal 4'-11" (1.5 m) 4'-11" (1.5 m) 4'-11" (1.5 m) 4'-11" (1.5 m) 4'-11" (1.5 m) 4'-11" (1.5 m) 4'-11" (1.5 m) * Crane rating (ft-lb) is the rated load (lb) multiplied by the respective distance (ft) from centerline of rotation with all extensions retracted and the inner and outer booms in a horizontal position, per ANSI B3.22. ** Crane weight does not include stabilizers. 47/326 SPECIFICATIONS Stabilizer Pad Diameter 7.9" (2 mm) Crane Storage Height 7' 1" (2398 mm) Mounting Space (K2 - K6) *** 3' 11" (1198 mm) Mounting Space (K7 - K8) *** 4' 3" (1298 mm) Rotational Torque 36,88 ft-lb (5.1 tm) Rotation Continuous Optimum Pump Performance gpm (8-11 L/min) System Pressure 575 psi (35 bar) Oil Reservoir Capacity 66. gal (25 L) Stabilizer Extension Span Standard (hydraulic out / hydraulic down) 3" (555 mm) Weight 815 lb (37 Option (Ext. hydraulic out / hydraulic 21' 1" (643 mm) down) Weight 1255 lb (57 Option (Ext. hydraulic out / hydraulic 25' 6" (777 mm) down) Weight 1365 lb (62 *** Maximum swing clearance radius required is 2'-7" (795 mm) at 8'-7" (2617 mm) from top of chassis frame. MINIMUM CHASSIS SPECIFICATIONS Front Axle Rating (GAWR) Rear Axle Rating (GAWR) Resistance to Bending Moment 2, lb (97 46, lb (2,865 5,7, in-lb (656,71 kg-m)
7 Chapter 1 Technical Data and Charts 5 47/326 K2 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 47/326 K2 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 3' (9.14m) (7.32m) (5.49m) (3.66m) (1.83m) CENTERLINE (1.83m) (3.66m) (5.49m) (7.32m)
8 6 47/326 Technical Specifications Manual # /326 K3 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 47/326 K3 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG (12.8 m) 3 (11. m) 3' (9.14 m) (7.32 m) (5.49 m) (3.66 m) (1.83 m) CENTERLINE (1.83 m) (3.66 m) (5.49 m) (7.32 m) 3' (9.14 m)
9 Chapter 1 Technical Data and Charts 7 47/326 K4 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 47/326 K4 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 48' (14.63m) (12.8m) 3 (1.97m) 3' (9.14m) (7.32m) (5.49m) (3.66m) (1.83m) ' 3 CENTERLINE (1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (1.97m)
10 8 47/326 Technical Specifications Manual # /326 K5 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 47/326 K5 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 54' (16.46m) 48' (14.63m) (12.8m) 3 (1.97m) 3' (9.14m) (7.32m) (5.49m) (3.66m) (1.83m) 3' 3 CENTERLINE (1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (1.97m) (12.8m)
11 Chapter 1 Technical Data and Charts 9 47/326 K6 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 47/326 K6 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG (18.29 m) 54' (16.46 m) 48' (14.63 m) (12.8 m) 3 (1.97 m) 3' (9.14 m) (7.32 m) (5.49 m) (3.66 m) (1.83 m) ' 3 CENTERLINE (1.83 m) (3.66 m) (5.49 m) (7.32 m) (9.14 m) (1.97 m) (12.8 m) 48' (14.63 m) 54' (16.46 m)
12 1 47/326 Technical Specifications Manual # /326 K7 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 47/326 K7 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 6 (2.12 m) (18.29 m) 54' (16.46 m) 48' (14.63 m) (12.8 m) 3 (1.97 m) 3' (9.14 m) (7.32 m) (5.49 m) (3.66 m) (1.83 m) CENTERLINE (1.83 m) (3.66 m) (5.49 m) (7.32 m) 3' (9.14 m) 3 (1.97 m) (12.8 m) 48' (14.63 m) 54' (16.46 m) (18.29 m)
13 Chapter 1 Technical Data and Charts 11 47/326 K8 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 47/326 K8 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 78' (23.77 m) 72' (21.95 m) 6 (2.12 m) (18.29 m) 54' (16.46 m) 48' (14.63 m) (12.8 m) 3 (1.97 m) ' (9.14 m) (7.32 m) (5.49 m) (3.66 m) (1.83 m) CENTERLINE (1.83 m) (3.66 m) (5.49 m) (7.32 m) 3' (9.14 m) 3 (1.97 m) (12.8 m) 48' (14.63 m) 54' (16.46 m) (18.29 m) 6 (2.12 m)
14 12 47/326 Technical Specifications Manual # /326 Dimensional Drawing A.6" (15) (EXV. K6) A TOP CHASSIS K8: 15' 11" (486) Max. 7' 7" (2151) K5: 15' 1" (4817) Max. 62' 1" (1914) K6: 15' 8" (477) Max. 55' 2" (1682) K5: 15' 6" (472) Max. 47' 9" (1455) K4: 15' 4" (468) Max. 4' 6" (1235) K3: 15' 3" (464) Max. 33' 1" (131) K2: 15' 4" (468) Max. 27' 2" (827) 5.4" (138) A-A (EXV.) K2-6: 4' 4" (1324) K7-8: 4' 8" (143) 1' 9" (52) 3/4" (19 mm) TOP CHASSIS 13.4" (34 mm) C L CHASSIS 1/2" (12 mm).7" (18) 8' 2" (25 mm) 47' 2" (1198) Standard: 3" (555 mm) Option: 21' 1" (643 mm) Option: 25' 6" (777 mm)
15 Chapter 1 Technical Data and Charts 13 47/326 Stabilizers -9" (3885 mm) 1'-7" (3215 mm) 9'-1" (2775 mm) -9" (3885 mm) 1'-7" (3215 mm) 9'-1" (2775 mm) TOP CHASSIS 5'-4" (S=1625 mm) -9" (S=265 mm) 9'-" (S=2735 mm) 13.4" (34) CL CHASSIS = = 5'-4" 7'-7" (23 mm) (S=1625 mm) -9" (S=265 mm) 9'-" (S=2735 mm) KL. 3 KL. 9 5'-4" (S=1625 mm) TOP CHASSIS -9" (S=265 mm) 9'-" (S=2735 mm)
16 14 47/326 Technical Specifications Manual # /326 Swing Clearance R = 31.2" (795 mm) R = 23.2" (59 mm) R = 22.1" (561 mm) R = 2.3" (516 mm) TOP CHASSIS
10/72 Technical Specifications
Manual # 99905403 10/72 Technical Specifications Revision Date 20120202 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
20/138SL Technical Specifications
Manual # 99904617 20/138SL Technical Specifications Revision Date 20120912 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
810k / 910k Technical Specifications
IOWA MOLD TOOLING CO., INC. P.O. Box 189 Garner, IA 50438 Tel: 641.923.3711 Fax: 641.923.2424 www.imt.com Manual # 99906164 810k / 910k Technical Specifications Revised: March 14, 2017 Copyright 2017 Iowa
MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL
OPERATION : 99903422: 20120920 PAGE - 1 MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL MODELS 0.5/4, 1.5/10, 2.0/15T, 2.6/19T IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189
17/117. Articulating Crane. Courtesy of Crane.Market
17/117 rticulating Crane 17/117 rticulating Crane Standard Features Specifications IMT 17/117 articulating cranes provide premium performance on the job site. With a max lifting capacity of 12,785 (58
Refuse Container with Loader Manual
Part # 99904934 Refuse Container with Loader Manual Operation, Safety, Spare Parts From S/N Refuse3101055 (Revised 20120105) IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX:
Model 5/35. Instruction Manual
99903044: IM-5/35: PAGE 1: 20111201 Model 5/35 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
Hydraulic Loaders , and Courtesy of Crane.Market
Hydraulic Loaders, 24562 and 28562 Hydraulic Loaders When your application demands precise handling and placement of palletized material even in tight places look to the IMT family of hydraulic loaders.
Model 7/51. Instruction Manual
99903276: IM-7/51: 20111201 PAGE 1 Model 7/51 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
Model 9/63. Instruction Manual
99903278 : IM-9/63: PAGE 1: 20111201 Model 9/63 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
Refuse Container with Loader Manual
Part # 99904801 Refuse Container with Loader Manual Operation, Safety, Spare Parts Revised 20111207 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website:
16000SIII Automatic Grease System
Manual # 99905495 16000SIII Automatic Grease System Effective 20120716 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
Model 11/76. Instruction Manual
99903048: IM-11/76: PAGE 1: 20111201 Model 11/76 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
Model 3.1/22 Crane. Manual # Revision Date
Manual # 99903549 Model 3.1/22 Crane Revision Date 20030601 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright 2003 Iowa Mold
BT 3063 BOOM TRUCK CRANE DATASHEET - IMPERIAL. Features
BOOM TRUCK CRANE DATASHEET - IMPERIAL Features 15 t @ 5 ft capacity at rated distance from center of rotation 63 ft maximum boom length 73 ft maximum sheave height 24/40 ft optional jib 113 ft maximum
IMT Bead Breaker 1000
Manual Part Number 99903638 IMT Bead Breaker 000 Revised 2050423 Copyright 204 Iowa Mold Tooling Co., Inc. All rights reserved IOWA MOLD TOOLING CO., INC. PO Box 89 Garner, IA 50438 Tel: 64-923-37 FAX:
BT 3870 BT US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
19 US t Liing Capacity Boom Truck Cranes Datasheet Imperial S model Features: 19 US t @ capacity at rated distance from center of rotation maximum boom length 0 maximum tip height Optional single stage
LINK-BELT LARGE TELESCOPIC BOOM CRANE SWING CAB (TLL)
LOAD CHARTS for Use in CCO Written Examinations LINK-BELT LARGE TELESCOPIC BOOM CRANE SWING CAB (TLL) This load chart has been adapted from the original manufacturer s load chart for use in CCO written
GIUFFRE.1 BT 3870 GIUFFRE BROS CRANES INC. BT To learn more about this model, call or visit giuffre.com today!
19 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial Features: 19 US t @ ft capacity at rated distance from center of rotation 70 ft maximum boom length 80 ft maximum tip height Optional single
BT 2047 BT US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features: BT Features: BT 2047
BT 2047 BT 2057 10 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 2047 BT 2057 Model: BT 2047 Features: BT 2047 10 US t @ 5 ft capacity at rated distance from center of rotation 47 ft maximum
BT 2047 BT 2057 BOOM TRUCK CRANE BT 2047 BT 2057 DATASHEET - IMPERIAL. Features: BT Features: BT 2057
BOOM TRUCK CRANE BT 2057 DATASHEET - IMPERIAL BT 2057 Model: Features: 10 t @ 5 ft capacity at rated distance from center of rotation 47 ft maximum boom length 56 ft 5 in maximum tip height 18 30 ft optional
Crane Installed on Cab & Chassis
Price quote for: Crane Installed on Cab & Chassis Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Aspen Equipment Company Mark Lundeen
PRELIMINARY CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.
80T capacity class Boom Truck Crane Datasheet imperial PRELIMINARY Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
BT 4792 RM 4792 RM US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
BT 4792 RM 4792 23.5 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 4792 RM 4792 Model: BT 4792 Features: 23.5 US t @ 5 ft capacity at rated distance from center of rotation 92 ft maximum
Crane Installed on Cab & Chassis
Price quote for: Crane Installed on Cab & Chassis Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Aspen Equipment Company Mark Lundeen
BT 4792 RM 4792 BT 4792 RM US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
BT 4792 RM 4792 23.5 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 4792 RM 4792 Model: BT 4792 Features: 23.5 US t @ 5 ft capacity at rated distance from center of rotation 92 ft maximum
CROSSOVER 8000 CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. Features
80T capacity class Boom Truck Crane Datasheet imperial PRE AR N I M LI Y Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
Model 20/141 Instruction Manual
99903216: IM-20/141: PAGE 1: 20120305 Model 20/141 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
CROSSOVER Datasheet imperial. Boom Truck Crane 60T capacity class. Features
Boom Truck Crane T capacity class Datasheet imperial Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 115 maximum tip height 32/57 optional jib 1 maximum sheave
bt USt Lifting Capacity Boom Truck Cranes Datasheet Imperial View thousands of Crane Specifications on FreeCraneSpecs.
28 USt Lifting Capacity Boom Truck Cranes Datasheet Imperial bt 28106 Features 28 USt @ 6 ft capacity at rated distance from center of rotation 106 ft maximum boom length 115 ft maximum tip height 30/47
Repair Parts Model 0.5/4 Crane
MODEL 0.5/4 : 99903420: 20111129 PAGE - 1 MATERIAL HANDLING SYSTEMS Repair Parts Model 0.5/4 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NO: 99903420 Iowa
CROSSOVER 4500L. 45T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
45T capacity class Boom Truck Crane Datasheet imperial Features 45 ton rated capacity @ 9 ft from center of rotation 129 ft maximum boom length 136 ft maximum tip height 32/49 ft optional jib 183 ft maximum
CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7
CROSSOVER T capacity class Boom truck crane Datasheet imperial
80T capacity class Boom truck crane Datasheet imperial Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional jib 190 ft maximum
LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL - 125 TON CAPACITY 1 LIFT RATINGS With Tubular Hammerhead and "K-F-L-M" Counterweight (34,000 lbs.) Min 11 82.8-91090 250000 250000 47 10 12 81.3-87730
Courtesy of Crane.Market
CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load
PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE
CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7
TM 3851 TM USt Lifting Capacity Boom Truck Crane Datasheet Imperial. Features
19 USt Lifting Capacity Boom Truck Crane Datasheet Imperial Features 19 USt @ 5 ft capacity at rated distance from center of rotation 51 ft maximum boom length 61 ft maximum tip height 18/29 ft optional
E-Z LIFT 2000 BMC/TMC OPERATORS MANUAL EZ90018-EZ90538 EZ90549-EZ90689
E-Z LIFT 2000 BMC/TMC OPERATORS MANUAL EZ90018-EZ90538 EZ90549-EZ90689 80464_E 2001 This page left intentionally blank. 80464_E 2001 President s Message The E-Z LIFT 2000 was designed and invented with
CONTENTS TM200 TELESCOPIC CRANE
TM200 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Chart: Main Boom & Jib...6 LMI Codes...7 Reeving
Working Range Diagram
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY Working Range Diagram Working Range Diagram 40 20 2 190 180 61 Fly + 115 170 160 10 8.5 61 Fly + 95 36.5 Fly + 115 150 140 36.5
CROSSOVER T capacity class Boom truck crane Datasheet imperial
CROSSOVER 00 T capacity class Boom truck crane Datasheet imperial CROSSOVER 00 Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 118 maximum tip height 32/57
BT 3870 BOOM TRUCK CRANE BT Features:
BOOM TRUCK CRANE Data Sheet - Imperial Features: Capacity at rated distance from center of rotation: 19 T @ 5 ft Maximum boom length: 70 ft Maximum tip height: 80 ft Optional Single Stage 24 ft or 24-40
MODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines)
DATE February, 2010 MODEL : TM-1882 CRANE SPECIFICATIONS MAXIMUM LIFTING CAPACITY 17,000kg@1.5m(6-part lines) BOOM WINCH SWING 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal
LINK-BELT (Rough Terrain) LOAD CHART
For Use in CCO Written Examinations LINK-BELT (Rough Terrain) LOAD CHART TELESCOPIC BOOM CRANE SWING CAB (TLL) These charts have been adapted from the original manufacturer s charts for use in CCO Written
LINK-BELT. These charts are not to be used for any other purpose. LOAD CHARTS for Use in CCO Written Examinations
LOAD CHARTS for Use in CCO Written Examinations LINK-BELT TELESCOPIC BOOM CRANE SWING CAB (TLL) These charts have been adapted from the original manufacturer s charts for use in NCCCO Written Examinations.
MANITOWOC (Crawler Mount) LOAD CHART
For Use in CCO Written Examinations MANITOWOC (Crawler Mount) LOAD CHART LATTICE BOOM CRAWLER CRANE (LBC) These charts have been adapted from the original manufacturer s charts for use in CCO Written Examinations.
T 500 SERIES. Truck Cranes. simple, available and cost effective FEATURES
T 500 SERIES Truck Cranes FEATURES 50 ton (45 mt) maximum lifting capacity 110 ft. (33.5 m) maximum boom length 169 ft. (51.5 m) maximum tip height Four-section full power, mechanically synchronized boom
9800 Series Crane & Model 1495 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS
9800/1495:99900919: 20061020 9800 Series Crane & Model 1495 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS Section 1 SPECIFICATIONS-9800 SERIES Section 1A. SPECIFICATIONS-1495 CRANE Section 2 CRANE
9000 Series Crane. & Model 1295 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS IOWA MOLD TOOLING CO., INC.
9000/1295:99900918: 20140228 9000 Series Crane & Model 1295 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS Section 1 SPECIFICATIONS-9000 SERIES Section 1A. SPECIFICATIONS-1295 CRANE Section 2 CRANE
INSTALLATION AND REPAIR MANUAL 4000 LB WINCH
4000#WIDE: 99900408: 20111213 1 INSTALLATION AND REPAIR MANUAL 4000 LB WINCH CRANES USED ON: 1080 1080A 6425 7200 SERIES 8025 8031 9000 SERIES IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
HC 50. Hydraulic Crawler Crane. simple, available and cost effective FEATURES
HC 50 Hydraulic Crawler Crane FEATURES 50 tons (45.4 mt) max lift capacity 160 ft. (48.8 m) max lift crane boom length 130+40 ft. (39.6+12.2 m) max lift crane boom & jib length Power up/down and freefall
RT 345 XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key...3 Dimensions
RT XL RT XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key............................................................................................
CONTENTS CM300.1 SERIES TELESCOPIC CRANE
CM300.1 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features... 4 3051T Chassis... 5 30100C Chassis... 6 Outrigger Extension...
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
TC300 SERIES TELESCOPIC CRANE 2 CONTENTS //////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Chassis Data... 5 Outrigger Extension... 6 Sub Frame...6
MATERIAL HANDLING SYSTEMS INSTALLATION GUIDE CRANE MODELS: 0.5/4 1.5/10 2.0/15T 2.6/19T
INSTALL-MINI : 99903431: 20120920 PAGE - 1 MATERIAL HANDLING SYSTEMS INSTALLATION GUIDE CRANE MODELS: 0.5/4 1.5/10 2.0/15T 2.6/19T IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711
RT230XL RT 230 XL. Rough Terrain Crane Datasheet imperial. Features: Rated capacity: ft working radius. Maximum boom length: 100 ft
Rough Terrain Crane Datasheet imperial RT230XL Features: Rated capacity: 30 ton @ 10 ft working radius Maximum boom length: 100 ft Maximum tip height: 140 ft CONTENTS Key............................................................................................
Repair Parts Model 4/29 Crane
4/29: 99903041: 20111201 PARTS-1 Repair Parts Model 4/29 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER: 99903041 Iowa
RT ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 55 ton @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft CONTENTS Page: Key............................................................................................
PSC 8629 HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.
PSC 8629 HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and durability.
OVERVIEW: This bulletin involves replacing the spring tip liners and installing spring cinch clip isolators.
NUMBER: 02-13-99 GROUP: Suspension DATE: Sep. 10, 1999 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 7250-60 TON CAPACITY 7250 1 LIFT RATINGS With Tubular Hammerhead and "K-F-L-M" Counterweight (34,000 Lbs.) 11 82.8-120000 46 6 12 81.3-120000 46 6 15 77.0-106950
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
T T XL. T / T XL 40 USt Lifting Capacity Truck Crane Datasheet Imperial. Features: T Features: T XL
T 340-1 / T 340-1 XL 40 USt Liing Capacity Truck Crane Datasheet Imperial T 340-1 T 340-1 XL Features: T 340-1 40 USt maximum liing capacity 94 maximum boom length 99 maximum tip height Engine power 0
GIUFFRE.COM. National Crane 500E2 Series GIUFFRE BROS CRANES INC. Product Guide
National Crane 5E2 Series Product Guide Features 16,3 t (18 USt) rating 21,6 m (71 ft) three-section boom Self-lubricating Easy Glide wear pads Internal anti-two block Features National Crane Series 5E2
Lifting Capacities Pounds (30 94 boom)
RT335 LENGTH 30-94 FT. ON OUTRIGGERS FULLY EXTENDED LENGTH 30 FT LENGTH 39 FT LENGTH 50 FT ED ED ED 10 63.0 70,000* 70,000* 69.4 46,600* 46,600* 10 12 58.5 60,800* 60,800* 66.2 46,600* 46,600* 71.7 46,600*
HC 80. Hydraulic Crawler Crane. simple, available and cost effective FEATURES
HC 80 Hydraulic Crawler Crane FEATURES 80 tons (73 mt) max lift capacity 200 ft. (61 m) max lift crane boom length 170+60 ft. (52+18 m) max lift crane boom & jib length 240 ft. (73 m) max boom & luffing
MANTIS 200RS LOAD CHART 54'-0 STANDARD BOOM LOAD CHART. MANTIS Model 200RS
LOAD CHART Limitations and General Conditions. This MANTIS CRANE as manufactured by SpanDeck, Inc., meets the requirements of ANSI B30.5 (2000), (When specifically equipped). Structure and stability have
Series 1300A Hydraulic Crane 30 Ton Load Ratings
Series 13A Hydraulic Crane 3 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
CONTENTS TC700 SERIES TELESCOPIC CRANE
TC700 SERIES TELESCOPIC CRANE CONTENTS //////////////////////////////////////////////////////////////////// Crane Features... 4 Range Diagram... 5 Load Chart: Main Boom... 6 Load Chart: Main Boom... 7
National Crane Series 800H
National Crane Series 8H Data Sheet Features 3,48 m (1 ft) four-section boom 2,86 t (23 USt) rating Self-lubricating Easy Glide wear pads Dimensions 85 mm (31.69") 247 mm (94.") Maximum transport width
HYDRAULIC PUMP SELECTION GUIDE
PSG-CI:99900698: 20070220 1 HYDRAULIC SELECTION GUIDE Cranes Compressors Cranes & Compressors Use of Flow Dividers IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 TEL: 641-923-3711 TECHNICAL
HC US tons lifting capacity Crawler crane Datasheet imperial
HC 2 HC 2 2 US tons liing capacity Crawler crane Datasheet imperial CONTENTS HC 2 Page: Highlights... 4 Specifications... 5 Dimensions... 67 59HI Offset Tip Boom Range Diagram... 8 Load Charts... 9 Notes
RT USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
55 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial www.terexcranes.com Features: Rated capacity: 55 USt @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft 1 CONTENTS Page:
series 2801 product guide features B O O M T R U C K S 28 Ton (24,4 mton) Capacity 4-Section 92' (28 m) Proportional Boom
series 2801 B O O M T R U C K S features 28 Ton (24,4 mton) Capacity 4-Section 92' (28 m) Proportional Boom 149' 1" (45,4 m) Maximum Tip Height 103' (31,4 m) Maximum Main Boom Tip Height 2-Section 26'
data model 22101S product guide contents features 22 ton (20 mton) capacity 4-section, 101' (30,8 m) proportional booms
data features 22 ton ( mton) capacity 4-section, 1' (, m) proportional booms 1' "(33,7 m) maximum main boom tip height 139' " (42,6 m) maximum tip height with jib 2' (,5 m) fixed jib 2-speed planetary
RT 670 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 70 ton @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft CONTENTS Page: Key............................................................................................
HC 60. Hydraulic Crawler Crane. simple, available and cost effective FEATURES
HC 60 Hydraulic Crawler Crane FEATURES 60 tons (54.4 mt) max lift capacity 160 ft. (48.8 m) max lift crane boom length 130+40 ft. (39.6+12.2 m) max lift crane boom & jib length Power up/down and freefall
Cranes. Range Diagram and Lifting Capacity RT345-1XL 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM
Range Diagram and Lifting Capacity RT345-1XL Cranes 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK
LOAD CHART MANUAL FOR RT55 ROUGH TERRAIN CRANE
Address:Quantang Indust=rial Park, 2nd Yuanda Road, Changsha Economic and Technological Development Zone, Hunan Province, China Postcode: 410131 Website: www.zoomlion.com LOAD CHART MANUAL FOR RT55 ROUGH
Liftcrane Boom Capacities 999 SERIES 2. Manitowoc Cranes, Inc.
Liftcrane Capacities No. 82 or 22EL LIFTING CAPACITIES: Lifting capacities for various boom lengths and operating radii are for freely suspended loads and do not exceed 75% of a static tipping load. Capacities
7200 Series Crane & Model 1080A (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS
7200/1080A:99900916: 20120419 7200 Series Crane & Model 1080A (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS Section 1 SPECIFICATIONS-7200 SERIES Section 1A. SPECIFICATIONS-1080A CRANE Section 2
UPTime is the Manitex commitment to complete support of thousands of units working every day.
UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX CM50 1 PC-EN-V1-1113
RT US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
70 US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: 70 US t @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft 07/26/12, Round 1 CONTENTS
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.
KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning
3000 Series Crane & Model 445 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS
3000/445:99900915: 20140909 3000 Series Crane & Model 445 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS Section 1 SPECIFICATIONS-3000 SERIES Section 1A. SPECIFICATIONS-445 CRANE Section 2 CRANE
Illustrated Parts List Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance
Model Parts & Specifications
Manual Part # 99903688 Model 5525-6025-6625 Parts & Specifications Manual Effective April 2005 Revision Date 20070621 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424
14000 Series Crane & Model (Metric Version)
14000/19140:99900943: 19980826 14000 Series Crane & Model 19140 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS Section 1 SPECIFICATIONS-14000 SERIES Section 1A. SPECIFICATIONS-19140 CRANE Section
series 2802 product guide features BOOM TRUCKS
series 2802 BOOM TRUCKS features 28 Ton (24,4 mton) Capacity 4-Section 102' (31,0 m) Proportional Boom 4-Section 92' (28.0 m) Proportional Boom 2-Section 26' (7,9 m) to 46' (14,0 m) Telescopic Jib 157'
LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7" (.80m) 41 0" /8" (3.52m) /16" (2.02m) /4" (.34m) 25" 11 0" (.
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY 41 0" (12.50m) 48 7" (14.80m) C L Of Rotation 13 8 1/8" (4.17m) 7 0" (2.13m) 4 5/8" (118mm) 11 6 7/8" (3.52m) 6 7 11/16" (2.02m)
For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations
HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER For Replacement, Order Part Number: L8P0001 (022603) Link Belt is a registered trademark. Page Contents 3 Operating Instructions
LOAD CHART MANUAL FOR RT60 ROUGH TERRAIN CRANE
LOAD CHART MANUAL FOR RT60 ROUGH TERRAIN CRANE Address:Quantang Indust=rial Park, 2nd Yuanda Road, Changsha Economic and Technological Development Zone, Hunan Province, China Postcode: 410131 Website:
DEMAG MODEL AC TON CAPACITY
LIFTING CHARTS - All Terrain Cranes DEMAG MODEL - 100 TON CAPACITY Working Range Main Boom 1 Liing capacities main boom in 39,700 lb 25' 3'' x 23' 360 85% Main Boom () 0 over rear 35.8 52.8 70.2 70.5 82.0
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Not for Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing
wide in travel mode 31 ft Tip Height 37 ft with Jib Wireless Radio Remote Control 5,800 lbs Capacity
24 wide in travel mode Wireless Radio Remote Control 31 ft Tip Height 37 ft with Jib 5,800 lbs Capacity URW205 in Action LOAD CHART Lifting capacity varies depending on outrigger configuration and boom