INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE GL1500 RAKE KIT

Size: px
Start display at page:

Download "INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE GL1500 RAKE KIT"

Transcription

1 INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE GL1500 RAKE KIT

2 Thank you for choosing the Motor Trike GL1500 Rake Kit. We ask that you read the directions before you start and follow them very closely. Doing so will save you time and ensure that the customer s experience with their new rake kit is a positive one. It is critical that proper eye wear, ear protection, and protective clothing is worn throughout this rake kit installation. Failure to secure this vehicle during installation could result in injury up to and including death. If you do not have the proper tools to do this installation, DO NOT ATTEMPT TO PERFORM THE INSTALLATION. When placing your order please remember to provide the bike year and model. This information is necessary for you to receive the correct parts. (Ex GL1500 I) Determine if the bike receiving the rake kit has air forks. If the bike does not have air forks you must order an air fork plug kit, part number MTFS When you receive your kit, please check to ensure that all parts and hardware are included and/or assembled correctly. Use the supplied assembly drawing as an aid. If there are any parts missing or if you have any questions concerning the kit at this time call Motor Trike at TRIKE ( ) Mon-Fri 8am-5pm CST. Or you can us at INFO@MOTORTRIKE.COM The installation process may vary for different years and/or models. Motor Trike Inc. reserves the right to change specifications, equipment, or designs at any time without notice and without incurring obligation. 2 of 22

3 DISSASSEMBLY PROCEDURE 1. Protect the dash by covering it during the disassembly and installation process. Figure 1: Protect Dash 2. Carefully remove the center section of the dash along with the black handle bar inserts. Lift the bottom of the center section up to remove it. Turning the handle bars will help remove the inserts. See Figure 2 and Figure 3. 3 of 22

4 LIFT HERE INSERTS Figure 2: Remove Dash Center and Inserts Figure 3: Inserts Removed 3. Remove the handle bar center cover. It snaps off. See Figure 4 4 of 22

5 Figure 4: Center Handle Bar Cover 4. Remove the fork tube cap covers. These will vary with year model. See Figure 5. Figure 5: Fork Tube Cap Cover 5. Lift the front tire just off of the ground using a hydraulic floor jack under the front of the bike. 6. Loosen the two pinch bolts in the top triple tree using a 12mm wrench. See Figure 6. 5 of 22

6 Figure 6: Loosen Top Pinch Bolts 7. Carefully remove the front fender side covers from both sides of the front fender. See Figure 7. Figure 7: Front Fender Side Cover. Right Side Shown 8. Remove the indicated fasteners from both sides of the front fender using an 8mm socket. Each bolt will have a top hat washer underneath it. Keep track of them for reinstallation. See Figure 8. 6 of 22

7 Figure 8: Remove Three Bolts from Both Sides 9. Remove the chrome brake rotor covers from both sides. 10. Remove the brake caliper mounting bolts using a 5mm and 6mm Allen socket. Remove both front calipers from the down tubes, but do not disconnect the brake lines. See Figure 9. 7 of 22

8 Figure 9: Remove Front Brake Calipers 11. Carefully hang the front calipers so that they do not scratch the front fender or lower front fairing. Wire tying a towel to the crash bars helps protect the lower front fairing. See Figure 10. Figure 10: Carefully Hang Front Brake Calipers 12. Using a Phillips screw driver remove the front wheel speed sensor from the front wheel. With the Phillips screw removed the cable will slide out. See Figure 11 8 of 22

9 Figure 11: Removing Front Wheel Speed Sensor 13. Free the wheel speed sensor from the clip attaching it to the front wheel assembly. See Figure 12. Figure 12: Wheel Speed Sensor Clip 9 of 22

10 14. Use a 5/16 Allen socket to loosen the lower triple tree pinch bolts under the front fairing. Access to these bolts is acquired by turning the handle bars all the way to the left for the right side bolts and vise versa for the left side bolts. There are 4 bolts in all. See Figure 13 and Figure 14. Figure 13: Lower Pinch Bolts Location Figure 14: Lower Triple Tree Pinch Bolts 15. The front wheel assembly should be free from the upper and lower triple trees at this point. 16. Slowly lift the front of the bike higher using the hydraulic floor jack. The forks will start to slide out of the triple trees. You may need to shift the front wheel back and forth for it to slide out. When the fork tubes are almost free from the lower triple tree, have someone hold the fork tubes to keep them from falling. 17. Roll the front wheel assembly away from the bike and secure it in a tire clamp. See Figure of 22

11 Figure 15: Secure Front Tire Assembly 18. Remove the air deflector from the lower triple tree using a Phillips head screw driver. See Figure 16. Figure 16: Air Deflector 19. Remove the steering cancel lever, located just behind the lower triple tree, from the bike by unsnapping it from the lower triple tree and using a Phillips screw driver. See Figure of 22

12 Figure 17: Steering Cancel Lever 20. Remove the turn signal cancelation sensor from the bottom of the lower triple tree with a Phillips head screw driver. Unplug the connector and remove. See Figure 18. Figure 18: Remove the Turn Signal Cancelation Sensor 21. Remove the handle bar saddle clamp bolts with a 12 mm socket. See Figure 19. Figure 19: Handle Bar Bolts 12 of 22

13 22. Lift the rubber cap to expose the top triple tree nut. Remove the harness from the steering stem. See Figure 20. Figure 20: Lift Rubber Cap 23. Remove the top triple tree nut with a 30mm socket. See Figure 21 Figure 21: Remove Top Triple Tree Nut 24. Remove the top triple tree. See Figure of 22

14 Figure 22: Remove Top Triple Tree 25. Bend the vertical tabs of the lock washer down to allow removal of the top lock nut. Use a lock nut removal tool (Honda Part # or ) to remove the top lock nut. See Figure 23. Figure 23: Remove Lock Washer and Nut 26. Remove the bearing adjustment nut with the same Honda tool and remove the lower triple tree and steering stem from the steering neck. See Figure 24 and Figure 25. Figure 24: Steering Adjustment Nut 14 of 22

15 Figure 25: Stock Lower Triple Tree 27. Wipe the lower bearing race off and inspect the race to determine if it is necessary to replace it. If there are any scratches, blemishes, or scoring on the surface of the bearing race, replace the bearing race. If the bearing race surface is completely smooth, then it may be reused. 28. To replace the lower bearing race: a. Knock out the old bearing with a screwdriver from the top. b. Use a bushing driver or similar tool to tap the new supplied bearing race into the lower end of the steering neck. Make sure to evenly tap the bearing race into the steering neck with the cup facing down. It will be difficult to remove the bearing race if it is installed upside down. Use a tool that will not damage or dent the bearing race. The race is seated when the sound of tapping on the bearing becomes solid. Visually inspect the race to make sure it seated properly. 29. Inspect the upper bearing and bearing race. Replace them if necessary. The replacement procedure for the upper bearing is the same as the lower bearing. INSTALLATION PROCEDURE 1. Remove the four pinch bolts from the stock lower triple tree and install them in the rake kit lower triple tree. Use blue loctite on the bolts. Thread in the two supplied studs to a depth of 10 rotations. See Figure of 22

16 Stock Pinch Bolts Stock Pinch Bolts STUDS Figure 26: Pinch Bolts and Mounting Studs 2. Grease the bearing on the lower triple tree. Spin the bearing several times and reapply grease. Every roller must be completely coated with grease. 3. Install the lower tree assembly on the bike and thread the steering adjustment nut onto the steering stem. 4. Torque the bearing adjustment nut to 30 ft-lbs using the Honda tool used earlier. Loosen the bearing adjustment nut and then re-torque it to 30 ft-lbs. Turn the lower tree from lock to lock five times and then re-torque the bearing adjustment nut to 30 ft-lbs one last time. 5. Reinstall the lock washer with two apposing fingers bent down into the grooves of the bearing adjustment nut. 6. Reinstall the lock nut and get it hand tight. Use the Honda nut tool to further tighten the lock nut, within 90 degrees or a ¼ turn, to align its grooves with the tabs of the lock nut. Bend the two tabs up to engage the lock nut. 7. Transfer both pinch bolts and cable brackets from the stock top triple tree to the rake kit top triple tree. If the bike is equipped with 7mm bolts use the supplied 8mm bolts in their place. Do not tighten. See Figure 27 and Figure of 22

17 Figure 27: Top Pinch Bolt and Cable Bracket. 8. Install the rake kit top triple tree along with the steering stem spacer. Install the steering stem nut and hand tighten. See Figure 28. STEM NUT TOP TREE SPACER Figure 28: Install Top Triple Tree 9. Rotate the top and bottom triple clamps left and right to make sure that the upper and lower bearings feel good and to check for any clearance issues. 10. Reinstall the front tire assembly by sliding the fork tubes into the lower and then upper triple trees as you lower the front of the bike. Tighten the upper and lower pinch bolts enough to hold the fork tubes in the clamps. Leave enough of the top of the fork tubes exposed to remove the fork tube caps. 11. If equipped, remove the air valve from each fork tube cap using a 10mm socket. See Figure of 22

18 Figure 29: Remove Air Valves 12. Remove the stock fork tube caps and transfer the o-rings from the stock caps to the rake kit extensions. Inspect the o-rings for damage. Apply fork tube oil to the o-rings. 13. Carefully screw the new fork tube caps into the fork tubes. Do not use a pneumatic or power tool to install the fork tube extensions. Slowly screw them in with a 3/8 drive ratchet. Taking the proper precautions during this step will eliminate the chance of cross threading the down tubes. Torque the fork tube caps to 20 ft-lbs. 14. Loosen all of the pinch bolts and adjust the fork tube extensions until the rear edge of the tube extension is flush with the top edge of the mounting hole. Do this for both tube extensions. See Figure 30. FLUSH WITH TOP TOP Figure 30: Extension Adjustment 15. Tighten all four of the lower triple tree pinch bolts on the front of the lower triple tree to 40 ft-lbs. See Figure Tighten both of the top triple tree pinch bolts to 20 ft-lbs. See Figure Screw the stock air valves into the top of the fork tube extensions if equipped. See Figure 29. If the bike does not have air valves screw the bolts supplied in MTFS into the fork tube caps to seal the fork tubes. Torque them to 15 ft-lbs. See Figure of 22

19 Figure 31: Sealing Bolt From MTFS Torque the steering stem nut to 76 ft-lbs. See Figure Reinstall the fork tube cap covers if equipped. See Figure Install the handle bars using the original handle bar saddles and hardware. The dot on the left side of the handle bar should go 1/8 above the top surface of the lower saddle clamp for correct handle bar timing. Torque the handle bar bolts to 20 ftlbs Figure 32: Handle Bar Clocking 21. Apply soapy water to the rubber grommet on the steering cancel harness. Slide the rubber grommet back on the harness to provide enough length to feed the connector all the way through the steering stem. Feed the connector all the way through the steering stem so that the connector sticks out of the bottom of the steering stem. See Figure of 22

20 Figure 33: Slide Grommet Back on Harness 22. Connect the harness to the turn signal cancellation sensor. Reinstall the turn signal cancellation sensor using a Phillips screw driver and the original hardware. See Figure 18. Slide the grommet back down the harness and push it on to the top nut. 23. Reinstall the turn signal cancellation arm using the supplied hardware. Use the plastic standoff to space the arm down. Put a washer on each side of the arm. Snap the end of the arm onto the turn signal cancelation sensor boss. See Figure 34. Figure 34: Steering Cancellation Arm 24. Install the front air deflector on the lower triple tree using the supplied M5 jam nuts on the M5 studs installed earlier. Remember to route the wheel speed sensor cable through the slot in the air deflector. See Figure Reconnect the front wheel speed sensor with a Phillips head screw driver. Reroute the cable back through the cable clip. See Figure 11 and Figure Reinstall the front calipers. See Figure of 22

21 27. Reinstall the left and right brake rotor chrome covers. Remember to reinstall the top hat washer under all six bolts. See Figure Reinstall the left and right fender side covers. See Figure Reinstall the center handle bar cover. See Figure Reinstall the left and right handle bar inserts and the center dash section. See Figure 2 and Figure Carefully lower the front of the bike and remove the hydraulic jack from under the bike. 32. Depending on several factors including year model, accessories installed on bike, and bike model, it may be necessary to trim the chrome fork cover on the front wheel assembly of the GL1500. Check for clearance between the chrome cover and the main front faring with the handle bars turned all the way to the steering lock. Follow the procedure below. With the handle bars at the end of their travel have an assistant bounce on the trike while you watch the clearance between the main front fairing and the chrome down tube cover. Check for clearance with the handle bars turned all the way to the left and then all the way to the right. 21 of 22

22 a. If there is no interference, trimming is not required. If there is interference trim both sides of the cover equally following steps b and c. Failure to trim parts when interference exists may result in the chrome cover breaking while riding. b. Remove the chrome cover by removing the two 5mm bolts on the top of the cover with an Allen wrench. Carefully measure before cutting and make sure the cuts are equal, level, and straight. This part is best cut with a cut-off wheel. Use tape to protect the chrome cover while cutting. See Figure INCH MIN. CUT LINE CUT LINE Figure 35: Front of GL1500 Front Wheel Assembly c. Check the clearance again to ensure you have removed enough to obtain full clearance. Remove more if necessary, while removing as little as possible. 33. Verify that all of the parts are installed properly and that all of the bolts are tight, keeping in mind that customer safety is the first priority. 34. Test drive the vehicle at parking lot speeds and then highway speeds. Always remember to check that your brakes are functioning correctly before beginning a test drive. Always wear a helmet and appropriate riding gear. 35. Clean the bike thoroughly inside and out. 22 of 22

INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT

INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT Thank you for choosing the Motor Trike Cross Country / Cross Roads / Hard Ball rake kit. We ask that you read

More information

INSTALLATION INSTRUCTIONS FOR THE TOMAHAWK ELECTRIC REVERSE

INSTALLATION INSTRUCTIONS FOR THE TOMAHAWK ELECTRIC REVERSE INSTALLATION INSTRUCTIONS FOR THE TOMAHAWK ELECTRIC REVERSE LAST UPDATED: April 2018 Thank you for choosing the Motor Trike Electric Reverse. We ask that you read the directions before you start and follow

More information

***THE OWNER'S MANUAL MUST BE GIVEN TO THE END USE CUSTOMER AFTER COMPLETING THE INSTALLATION.***

***THE OWNER'S MANUAL MUST BE GIVEN TO THE END USE CUSTOMER AFTER COMPLETING THE INSTALLATION.*** INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE HARLEY MECHANICAL REVERSE 1999-2006 FIVE SPEED FLH LAST UPDATED: OCTOBER 2011 AS THE INSTALLER OF THIS MECHANICAL REVERSE, YOU MUST BECOME FAMILIAR WITH PROPER

More information

Cobra & Cobra XL. Power Trak Current GL1800 Goldwing. Installation Instructions. California Sidecar Parts & Technical Support

Cobra & Cobra XL. Power Trak Current GL1800 Goldwing. Installation Instructions. California Sidecar Parts & Technical Support Cobra & Cobra XL by 2001 - Current GL1800 Goldwing Power Trak 6 Installation Instructions REVISED 1 2015 California Sidecar Parts & Technical Support 434.263.8866 Warnings and considerations: 1. Disclaimer

More information

Champion Trikes. EZ-Steer Installation Guide For 2007-Up Kawasaki Vulcan 900 Motorcycles Classic, Classic LT, and Custom Models

Champion Trikes. EZ-Steer Installation Guide For 2007-Up Kawasaki Vulcan 900 Motorcycles Classic, Classic LT, and Custom Models Champion Trikes For 2007-Up Kawasaki Vulcan 900 Motorcycles Note: Above CAD picture is for illustrative purposes to show main components of EZ Steer. Champion Motorcycle Accessories International, Inc.

More information

VRSC-DX Truck-Lite LED Headlight Installation Instructions

VRSC-DX Truck-Lite LED Headlight Installation Instructions VRSC-DX Truck-Lite LED Headlight Installation Instructions The following Instructions are for installing a 7 Truck-Lite LED headlight into a Harley Davidson VRSC-DX Night Rod Special fairing. Other 7 headlights

More information

Installation Instructions

Installation Instructions Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to

More information

AEV30308AA Last Updated: 05/31/18. 4 DUALSPORT sc SUSPENSION system for RAM 1500 air ride standard and rebel INSTALLATION GUIDE

AEV30308AA Last Updated: 05/31/18. 4 DUALSPORT sc SUSPENSION system for RAM 1500 air ride standard and rebel INSTALLATION GUIDE AEV30308AA Last Updated: 05/31/18 4 DUALSPORT sc SUSPENSION system for RAM 1500 air ride standard and rebel INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND

More information

DYNATRAC PRODUCTS V5.3

DYNATRAC PRODUCTS V5.3 DYNATRAC PRODUCTS V5.3 2000-2008 Dodge Hub Kit Stage 1 4x4, Front Axle Free Spin Conversion Kit Note: This Kit is not Approved for 2007 & up 3500 Cab and Chassis Trucks Due to a Larger U-Joint (If U-Joint

More information

w w w. h d o n l i n e s h o p. d e ROAD KING FAT HANDLEBAR KIT GENERAL PREPARATION - ALL MODELS -J02375 REV Kit Number Models ABS Models

w w w. h d o n l i n e s h o p. d e ROAD KING FAT HANDLEBAR KIT GENERAL PREPARATION - ALL MODELS -J02375 REV Kit Number Models ABS Models -J02375 REV. 2008--9 GENERAL Kit Number 56675-05 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only). ABS Models

More information

'99-03 CHEVROLET/GMC IFS 4WD 6" SUSPENSION SYSTEM P/N INSTALLATION INSTRUCTIONS

'99-03 CHEVROLET/GMC IFS 4WD 6 SUSPENSION SYSTEM P/N INSTALLATION INSTRUCTIONS 1/16/04 '99-03 CHEVROLET/GMC IFS 4WD 6" SUSPENSION SYSTEM P/N. 10-41099 INSTALLATION INSTRUCTIONS NOTE: Each Lift Kit and options to Lift Kits are packaged separately. Therefore, installation procedures

More information

INSTALLATION FORK MOUNTED DRIVING LIGHTS 5008

INSTALLATION FORK MOUNTED DRIVING LIGHTS 5008 5008 PARTS INCLUDED 1 Right Fork Mount Assembly 1 Left Fork Mount Assembly 2 H3 Driving Light Assemblies 1 12-Pin Wiring Adapter 1 Hardware Kit for Fork Mount Driving Lights, Including: 6 5/16-18 Nylock

More information

PRODUCT USE INFORMATION

PRODUCT USE INFORMATION 921545200 *54520BAG1* 54520BAG1 Thank you for choosing Rough Country for all your suspension needs. 2009-17 Ford F150 3 Suspension Kit Rough Country recommends a certified technician install this system.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 23302 2002 MDX Issue Date PN 08U97-S3V-210 (BLACK) P/N 08U97-S3V-270 (SADDLE) NOV 2001 PARTS LIST Wood trim steering wheel 1. Make sure

More information

RHINO SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS

RHINO SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS PARTS INCLUDED: 2 FRONT UPPER A-ARMS 2 FRONT LOWER A-ARMS 2 UNI-BALL JOINTS 2 UNI-BALL JOINT STUDS 2 UNI-BALL JOINT CAPS 2 RETAINING RINGS 1 FRONT SHOCK ASSEM. 2 DELRON STEERING STOPS 2 SHOCK MOUNT SPACERS

More information

w w w. h d o n l i n e s h o p. d e STREET SLAMMER HANDLEBAR KIT GENERAL INSTALLATION -J03363 REV Kit Number Models Kit Contents

w w w. h d o n l i n e s h o p. d e STREET SLAMMER HANDLEBAR KIT GENERAL INSTALLATION -J03363 REV Kit Number Models Kit Contents -J06 REV. 006-06- GENERAL Kit Number 69-0 Models STREET SLAMMER HANDLEBAR KIT Ask a Harley-Davidson dealer or refer to the latest Harley- Davidson Genuine Motor Accessories and Genuine Motor Parts catalog

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory TRIM Application 2009 ACCORD 4-DOOR Publications No. AII 40008 Issue Date JULY 2008 PARTS LIST Steering Wheel Trim (Without Navigation) P/N 08Z13-TA0-100 Right steering

More information

Multistrada (MTS) Tank Installation Notes. Tools Required. Phase 1: Remove Fairings. Phase 2: Remove Fuel Tank

Multistrada (MTS) Tank Installation Notes. Tools Required. Phase 1: Remove Fairings. Phase 2: Remove Fuel Tank The California Cycleworks MTS tank provides an aftermarket alternative to the OEM nylon fuel tanks as used on aircooled Desmodue Ducati Multistrada 1100, 1000, and 620 models. This fuel tank is NOT for

More information

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog# Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,

More information

Installation Notes: #86000-R Race Series +3.5 L/T Kit

Installation Notes: #86000-R Race Series +3.5 L/T Kit 159 North Maple St. Unit J, CORONA CA 92880 P. 951-737-9682 F. 951-737-9006 WWW.CHAOSFAB.COM Installation Notes: #86000-R Race Series +3.5 L/T Kit Factory manual is recommended for removal and re-installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. ELEMENT AII 24282 Issue Date DEC 2002 PARTS LIST 2 Screw-grommets CD Changer Attachment Kit: P/N 08B26-SCV-100 CD changer plate 2 Self-tapping

More information

2018 UP GL1800 Gold Wing & Gold Wing Tour. Power Trak Installation Instructions. California Sidecar Parts & Technical Support

2018 UP GL1800 Gold Wing & Gold Wing Tour. Power Trak Installation Instructions. California Sidecar Parts & Technical Support by 2018 UP GL1800 Gold Wing & Gold Wing Tour Power Trak Installation Instructions California Sidecar Parts & Technical Support 434.263.8866 Warnings and considerations: 1. Disclaimer - These instructions

More information

PARTS LIST. REPLACEMENT PARTS and ACCESSORIES PREPARATION VN1600. PREPARATION VN1500D and VN800B

PARTS LIST. REPLACEMENT PARTS and ACCESSORIES PREPARATION VN1600. PREPARATION VN1500D and VN800B INSTALLATION AND OWNER S MANUAL Light Bar N925 for Installation to: Kawasaki VN1500D&E and VN800B Pages 1,2,3 and 5 Kawasaki VN1600 Pages 1, 4 and 5 PARTS LIST QTY. PART NO. DESCRIPTION 1 N925 Light Bar

More information

TOYOTA 4-RUNNER KIT 5 KIT

TOYOTA 4-RUNNER KIT 5 KIT 92173600 1990-1995 TOYOTA 4-RUNNER KIT 5 KIT Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition to these

More information

WARNING: Only perform this installation if you are experienced, fully equipped mechanic.

WARNING: Only perform this installation if you are experienced, fully equipped mechanic. DYNATRAC V3.2 2005-Present Ford Super Duty 250/350-4x4, Front Axle, Free Spin Conversion Kit Some of the less common tools, which will be required: 6 point Spanner socket (OTC #7090-A or equivalent). These

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PERFORMANCE AT THE WHEELS KIT W155-5 CHRYSLER 8 3 /4" & 9 3 /4" REAR AXLES Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Please take the time

More information

SADDLEBAG AUDIO WIRE HARNESS KIT P/N

SADDLEBAG AUDIO WIRE HARNESS KIT P/N SADDLEBAG AUDIO WIRE HARNESS KIT P/N 2880986 APPLICATION ALL INDIAN MOTORCYCLES WITH BOTH TRUNK AND SADDLEBAG AUDIO INSTALLED BEFORE YOU BEGIN Read these instructions and check to be sure all parts and

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS DISC BRAKE CONVERSION KITS A120-4 & A120-5 1964-1/2-66 Ford & Mercury Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases take the time to

More information

07-UP AVALANCHE 7.5 KIT

07-UP AVALANCHE 7.5 KIT 92120900R1 07-UP AVALANCHE 7.5 KIT Thank you for choosing Rough Country for your suspension needs. We appreciate your business!! This kit will not fit vehicles equipped with electric steering or trucks

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC4001, RC4001X Applications: Mopar 7.25, 8.25, 9.25 Axles Thank you for choosing Leed Brakes for your automotive product needs. Before you

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

Installation Instructions INDY SHIFTER Fits: Mustang Fastback & Convertible with MT-82 Transmission Catalog #

Installation Instructions INDY SHIFTER Fits: Mustang Fastback & Convertible with MT-82 Transmission Catalog # Installation Instructions INDY SHIFTER Fits: 2015-2018 Mustang Fastback & Convertible with MT-82 Transmission Catalog # 3916036 Watch our installation video on YouTube WORK SAFELY! For maximum safety,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS R1 REAR DRUM TO DISC BRAKE CONVERSION KIT A130-3 JEEP CJ SERIES W/AMC-20 REAR AXLES AND 5 x 5-1/2" BOLT CIRCLE Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your

More information

CHAINGUARD REGAL ST COLOR

CHAINGUARD REGAL ST COLOR DESOTO/ REGAL HAULER PARTS LIST Item Part # Description QTY Item Part # Description QTY 1 11871 REFLECTOR KIT TRIKE 1 32 11764 FENDER BRACE 24" MWT 1 2 12199 SCREW #14 x 3/4 4 33 12176 NUT5/16-24 HEX 2

More information

AEV30213AH Last Updated: 04/28/17. jk wrangler dualsport sc suspension INSTALLATION GUIDE

AEV30213AH Last Updated: 04/28/17. jk wrangler dualsport sc suspension INSTALLATION GUIDE AEV30213AH Last Updated: 04/28/17 jk wrangler 3.5 4.5 dualsport sc suspension INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS

More information

PRODUCT USE INFORMATION

PRODUCT USE INFORMATION 921522000A *52200BAG3* 52200BAG3 Thank you for choosing Rough Country for all your suspension needs. 2009-18 Ford F150 2 Leveling Kit Rough Country recommends a certified technician install this system.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 30528 INTERFACE 2006 CR-V Issue Date SEP 2005 PARTS LIST XM Radio Unit Kit (sold separately): P/N 08A15-EX5-000 2 Wire tie with clips

More information

PRODUCT USE INFORMATION

PRODUCT USE INFORMATION 9RC61000 Jeep YJ Body Lift Thank you for choosing Rough Country for all your suspension needs. This body lift fits both manual and Automatic equipped vehicles!!! Refer to last page of this Instruction

More information

INSTALLATION. DRIVING LIGHTS for FLHT/FLHX/FLHR 5005

INSTALLATION. DRIVING LIGHTS for FLHT/FLHX/FLHR 5005 DRIVING LIGHTS for FLHT/FLHX/FLHR 5005 PARTS INCLUDED 1 Right Driving Light Assembly 1 Left Driving Light Assembly 1 Right Driving Light Bracket 1 Left Driving Light Bracket 4 Driving Light Bracket Plugs

More information

Yamaha Nytro Relocator Kit

Yamaha Nytro Relocator Kit Included Parts: 1 Relocator bracket assembly 2 Upper assembly Oilite bushing halves 1 Lower steering block assembly 2 Lower assembly Oilite bushing halves 1 Tube of Loc-tite OFTRacing.com Email Scott Moto

More information

Installation Instructions HURST COMPETITION AND BILLET/PLUS SHIFTER Mustang w/5-speed Manual Transmission (GT only)

Installation Instructions HURST COMPETITION AND BILLET/PLUS SHIFTER Mustang w/5-speed Manual Transmission (GT only) Installation Instructions HURST COMPETITION AND BILLET/PLUS SHIFTER 2005-2010 Mustang w/5-speed Manual Transmission (GT only) Catalog# 3915201 WORK SAFELY! For maximum safety, perform this installation

More information

CHAINGUARD REGAL ST COLOR

CHAINGUARD REGAL ST COLOR DESOTO/ REGAL HAULER PARTS LIST Item Part # Description QTY Item Part # Description QTY 1 11871 REFLECTOR KIT TRIKE 1 32 11762 FENDER BRACE 20" MWT 1 2 12199 SCREW #14 x 3/4 4 11764 FENDER BRACE 24" MWT

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

Installation Instructions Z-Gate Shifter

Installation Instructions Z-Gate Shifter Installation Instructions Z-Gate Shifter Part Number 80681 1998, 2001 by B&M Racing and Performance Products The B&M Z-Gate shifter can be used in vehicles equipped with most popular three speed automatic

More information

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D E92 335i/xi without stock oil cooler

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D E92 335i/xi without stock oil cooler OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D570-0921 APPLICATION 2007-08 E92 335i/xi without stock oil cooler Congratulations for being selective enough to use a Dinan Engineering Oil Cooler

More information

INSTALLATION INSTRUCTIONS ELITE SERIES REAR BUMPER AND TIRE CARRIER Part Number: 89525/89800 Application: Jeep JK

INSTALLATION INSTRUCTIONS ELITE SERIES REAR BUMPER AND TIRE CARRIER Part Number: 89525/89800 Application: Jeep JK INSTALLATION INSTRUCTIONS ELITE SERIES REAR BUMPER AND TIRE CARRIER Part Number: 89525/89800 Application: 2007+ Jeep JK GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important.

More information

INSTALLATION INSTRUCTIONS ELITE SERIES REAR BUMPER AND TIRE CARRIER Part Number: 89525/89800 Application: Jeep JK

INSTALLATION INSTRUCTIONS ELITE SERIES REAR BUMPER AND TIRE CARRIER Part Number: 89525/89800 Application: Jeep JK INSTALLATION INSTRUCTIONS ELITE SERIES REAR BUMPER AND TIRE CARRIER Part Number: 89525/89800 Application: 2007+ Jeep JK GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important.

More information

»Product» Safety Warning

»Product» Safety Warning J1400, J1401 Installation Instructions 1997-2006 Jeep TJ 4 Suspension Lift Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad Products

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 27363 ODYSSEY Issue Date SEP 2004 PARTS LIST Compact Subwoofer Kit: P/N 08A39-5E1-010 4 Flange bolt, 6 x 12 mm Subwoofer 3 Cushion tapes

More information

M-7210-Z3 Focus Short-Throw Shifter (fits 2000-April 2002) INSTALLATION INSTRUCTIONS

M-7210-Z3 Focus Short-Throw Shifter (fits 2000-April 2002) INSTALLATION INSTRUCTIONS Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. REAR VIEW CAMERA ATTACHMENT PILOT AII 23620 Issue Date MAY 2002 PARTS LIST Attachment Kit : P/N 08B21-S9V-100 Control unit harness Rear

More information

97-06 JEEP TJ/LJ LONG ARM UPGRADE KIT

97-06 JEEP TJ/LJ LONG ARM UPGRADE KIT 921663U00 97-06 JEEP TJ/LJ LONG ARM UPGRADE KIT Thank you for choosing Rough Country for your suspension needs. This kit is an upgrade kit only. This kit includes frame mounting points and adjustable long

More information

Slave Cylinder Weep Hole Drilling Procedure

Slave Cylinder Weep Hole Drilling Procedure Slave Cylinder Weep Hole Drilling Procedure Tools Required: T20 Torx Driver T25 Torx Driver T25 Torx Bit with ¼ Ratchet Wrench 4mm Hex Key (Allen wrench) 5mm Hex Key 6mm Hex Key 8mm Hex Key 12mm Hex Key

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

XJ CHEROKEE LIFT KIT

XJ CHEROKEE LIFT KIT 921633XN200 Thank you for choosing Rough Country for your suspension needs. 84-01 4.5 XJ CHEROKEE LIFT KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,

More information

Do not have any open flame or heat sources close to the installation

Do not have any open flame or heat sources close to the installation March 6, 2017 IS# 791 Page 1 of 16 Thank you for purchasing a Transfer Flow, Inc. 50-gallon replacement fuel system for your 2011-16 Ford diesel short bed pickup. This system will fit any 2x4 or 4x4 crew

More information

KIT # CSS-C SUSPENSION LIFT KIT

KIT # CSS-C SUSPENSION LIFT KIT 14385 Veterans Way Moreno Valley, CA 92553 Phone: (951) 571-0212 Fax: (951) 571-0215 2001-2010 CHEVROLET SILVERADO 1500 AND 2500 HD 4WD AND 2WD PICK-UP 1999-2010 CHEVY 2500 4WD PICK-UPS 2001-2010 2500

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

TCI Trans-Scat

TCI Trans-Scat Page 1 of 5 Return to Instruction Sheet index TCI 400000 Trans-Scat Turbo Hydramatic 400-1965-Up This kit will allow you to re-program your transmission valve body. This kit will give you firm positive

More information

Installation Instructions for Teraflex 2.5 Inch Lift Kit with Shocks (2010 Jeep Wrangler Unlimited)

Installation Instructions for Teraflex 2.5 Inch Lift Kit with Shocks (2010 Jeep Wrangler Unlimited) Installation Instructions for Teraflex 2.5 Inch Lift Kit with Shocks (2010 Jeep Wrangler Unlimited) Installation Time: 6 Hours Tools Required: Floor Jack Jack Stands Ratchet Torque Wrench 15mm Socket 15mm

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM S2000 AII 26324 Issue Date OCT 2004 PARTS LIST Headrest Speaker System P/N 08A54-S2A-100 3 Small wire ties 2 Headrest speakers 9

More information

2. Remove front wheels.

2. Remove front wheels. 1 PARTS DIAGRAM 2 Installation Instructions: (PASSENGER SIDE) 1. Place jack under center of RUV front end and lift until front wheels clear the ground. Be careful to support the RUV properly so that it

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. FENDER FLARES P/N 08P21-S3V-200 2003 MDX BII 24553 Issue Date SEP 2002 PARTS LIST Right rear fender flare Left front fender flare Right

More information

Installation Instructions HURST BILLET COMPETITION/PLUS SHIFTER Dodge Challenger

Installation Instructions HURST BILLET COMPETITION/PLUS SHIFTER Dodge Challenger Installation Instructions HURST BILLET COMPETITION/PLUS SHIFTER 2009-2015 Dodge Challenger Catalog #3916020 WORK SAFELY! For maximum safety, perform this installation on a clean, level surface and with

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 2013-2014 Honda CBR500R/RA Tour Performance Handlebar Risers P/N: HR01087 IMPORTANT: PLEASE GIVE CUSTOMER ENCLOSED INFORMATION! Thank you for your purchase of our HeliBars. They

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application 2012 ZDX Publications No. BII 47089 Issue Date SEP 2011 PARTS LIST Tailgate spoiler 2 Brackets 4 Nuts 4 Bolts TOOLS AND SUPPLIES REQUIRED Phillips screwdriver

More information

Amp & Speaker Upgrade Install Instructions for Batwing Fairing

Amp & Speaker Upgrade Install Instructions for Batwing Fairing Amp & Speaker Upgrade Install Instructions for Batwing Fairing Tools Needed: 1/2 inch Socket Wire Cutters 7/16 inch Socket Wire Strippers 10 mm Socket Phillips Screwdriver 1/2 inch Ratchet Wrench T25 Torx

More information

99-06 CHEVY/GM LIFT KIT

99-06 CHEVY/GM LIFT KIT 92127200 99-06 CHEVY/GM 1500 6 LIFT KIT Thank you for choosing Rough Country for all of your suspension needs. Rough Country recommends a certified technician installs this system. In addition to these

More information

Installation instructions for IPS parking Brake Kit for 1996 to 2002 Viper

Installation instructions for IPS parking Brake Kit for 1996 to 2002 Viper Installation instructions for IPS parking Brake Kit for 1996 to 2002 Viper WARNING Modification of your vehicle with the parts identified above may alter its stock performance; the buyer hereby expressly

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 214205 INSTALLATION INSTRUCTIONS 8-27-2015 REV.A PART # DESCRIPTION 7929 Lincoln Ave. Riverside, CA 92504 Phone: 951.689.ICON Fax: 951.689.1016 214205 14-UP RAM 2500 4.5 BOX KIT COMPONENTS INCLUDED (1)

More information

Ford F150 2 Suspension Kit

Ford F150 2 Suspension Kit 92569000B Thank you for choosing Rough Country for all your suspension needs. 2014-17 Ford F150 2 Suspension Kit Rough Country recommends a certified technician install this system. In addition to these

More information

PRE-INSTALLATION. INSTALLATION INSTRUCTIONS Front Ford F150 4WD 4" Suspension Lift Kit

PRE-INSTALLATION. INSTALLATION INSTRUCTIONS Front Ford F150 4WD 4 Suspension Lift Kit 2015 Ford F150 4WD 4" Suspension Lift Kit PRE-INSTALLATION 2 - Knuckle (Driv/Pass) 2 - Crossmember (Front/Rear) 2 - Differential Bracket (Driv/Pass) 1 - Diff. Brace Bracket (Pass) 2 - Front Brake Line

More information

Page 1. File: Motolight caliper one-piece Date: 8/14/2006

Page 1. File: Motolight caliper one-piece Date: 8/14/2006 Page 1 Caliper Mount Installation One-piece mounting brackets You should allow about two to three hours for installation. We suggest you use a well-lighted space for installation. PLEASE READ ALL THE INSTRUCTIONS.

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Page 1 Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage

More information

09-12 Dodge 4WD Leveling Kit

09-12 Dodge 4WD Leveling Kit 9235900 09-12 Dodge 4WD 1500 2.5 Leveling Kit Thank you for choosing Rough Country for all your suspension needs. DOES NOT FIT TRX PACKAGE VEHICLES!! Rough Country recommends a certified technician install

More information

DDMWorks Race Intake for Mazda Miata

DDMWorks Race Intake for Mazda Miata DDMWorks Race Intake for 1999-2005 Mazda Miata f This DDMworks Race Intake improves your Mazda Miata by supplying your engine with cold pressurized air for it to breathe in through a free flowing filter

More information

GM Floor Mount Automatic Transmission Shifter Installation Instructions

GM Floor Mount Automatic Transmission Shifter Installation Instructions GM Mount Automatic Transmission Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com GM Mount Automatic Transmission

More information

READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION OF SYSTEM AND OPERATION OF VEHICLE.

READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION OF SYSTEM AND OPERATION OF VEHICLE. Add-A-Leaf Installation Instructions READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION OF SYSTEM AND OPERATION OF VEHICLE. PRODUCT SAFETY WARNING: Certain BDS Suspension products

More information

PRE-INSTALLATION. INSTALLATION INSTRUCTIONS STEP 1: Park vehicle on level surface and chock rear wheels.

PRE-INSTALLATION. INSTALLATION INSTRUCTIONS STEP 1: Park vehicle on level surface and chock rear wheels. 2007-2013 7.5" GMC/Chevrolet 1500 4WD Suspension Lift kit PRE-INSTALLATION 15004 2 - Cross-member (Fr/Rr) 2 - Sway Bar Drop Bracket 2 - Knuckle (Dr/Pass) 1 - Driver Diff. Bracket 1 - Passenger Diff. Bracket

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 29191 CIVIC AM/FM CD TUNER 2 and 4 DOOR (DX) Issue Date SEP 2005 PARTS LIST Pocket Attachment Kit P/N 08B60-SCV-100 AM/FM CD Tuner P/N

More information

1.1 Quad Valve and Tri-Valve. Contents WATER DUMP BODY O-RING EXHAUST VALVE QUAD VALVE TIE WRAP EXHAUST MAIN BODY O-RING

1.1 Quad Valve and Tri-Valve. Contents WATER DUMP BODY O-RING EXHAUST VALVE QUAD VALVE TIE WRAP EXHAUST MAIN BODY O-RING Quad Valve and Tri-Valve Exhaust Assembly on Fiberglass Helmets Quad Valve and Tri-Valve Exhaust Contents QUAD-1 QUAD-2 QUAD-2 QUAD-2 QUAD-6 QUAD-7 1.1 Quad Valve and Tri- Valve Exhaust Assembly on Fiberglass

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 26042-26353 XM INTERFACE ODYSSEY EXCEPT EX-L WITH NAVI/RES Issue Date FEB 2004 PARTS LIST 8 Wire ties XM Radio Attachment P/N 08B15-S0X-100

More information

63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit

63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit PRO COMP SUSPENSION 63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit This document contains very important information that includes warranty information and instructions for resolving

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC2001, RC2001X Applications: Mopar 8-3/4 & 9-3/4 Rear Axles Thank you for choosing Leed Brakes for your automotive product needs. Before

More information

BD Venom Dual Fuel F O R D 6. 7 L P O W E R S T R O K E Installation Instructions

BD Venom Dual Fuel F O R D 6. 7 L P O W E R S T R O K E Installation Instructions U 30 January 2017 (1050470) Venom Dual Fuel Kit (I-00390) 1 DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com BD Venom Dual Fuel 2 0 1 1-2 0 1 4 F O R D 6. 7 L P O W E R S T R O K E Installation

More information

Toyota Tacoma Winch Mount Bumper Installation Instructions Tools Required: Transmission cooler relocation brackets Torque Wrench

Toyota Tacoma Winch Mount Bumper Installation Instructions Tools Required: Transmission cooler relocation brackets Torque Wrench 2016-2017 Toyota Tacoma Winch Mount Bumper Installation Instructions Tools Required: Items Included: Small flat head screw driver Winch Mount Ratchet, 10mm, 12mm, 14mm, 17mm & Skid Plate 19mm sockets Transmission

More information

INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 38133-38406 HITCH 2008 ODYSSEY Issue Date NOV 2007 NOTE: A required heavy-duty power steering cooler, ATF cooler and air duct are required

More information

XJ CHEROKEE LIFT KIT

XJ CHEROKEE LIFT KIT 92169600 84-01 6.5 XJ CHEROKEE LIFT KIT Thank you for choosing Rough Country for your suspension needs. Rough Country recommends a certified technician installs this system. In addition to these instructions,

More information

2010+ Victory Cross Country / Cross Roads Installation Guide Nov 2014

2010+ Victory Cross Country / Cross Roads Installation Guide Nov 2014 2010+ Victory Cross Country / Cross Roads Installation Guide Nov 2014 125 Industrial Drive Spearfish, SD 57783 Toll Free 888.3WHEELS w w w. l e h m a n t r i k e s. c o m UNDERSTANDING SAFETY LABELS &

More information

1 M-3000-H4 F150 4X4 Lowering Kit

1 M-3000-H4 F150 4X4 Lowering Kit READ INSTRUCTIONS COMPLETELY THROUGH BEFORE STARTING. IT IS RECOMMENDED THAT INSTALLATION BE DONE BY A QUALIFIED MECHANIC. REPLACE ALL STOCK PARTS THAT ARE DAMAGED OR WORN. ALWAYS WEAR EYE PROTECTION.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application 2015 CR-Z Publications No. VERSION 1 Issue Date SEP 2014 PARTS LIST Armrest console Armrest bracket 2 Collars 4 Washer-bolts 2 Caps TOOLS AND SUPPLIES REQUIRED

More information

5481 FRONT ANTI-SWAY BAR 10+ CHEVROLET CAMARO

5481 FRONT ANTI-SWAY BAR 10+ CHEVROLET CAMARO INSTALLATION INSTRUCTIONS 5481 FRONT ANTI-SWAY BAR 10+ CHEVROLET CAMARO CONGRATULATIONS! You were selective enough to choose a BELLTECH PRODUCT. We have spent many hours developing our line of products

More information

Installation Instructions for the EVO3 Height-Adjustable Ultimate Short Shifter

Installation Instructions for the EVO3 Height-Adjustable Ultimate Short Shifter Installation Instructions for the EVO3 Height-Adjustable Ultimate Short Shifter for 1992-2005 325, 323, 318 and 1986-1994 525, 528, 535, 540 5-speed models only. (part number USSE3 and USSE5) Thank you

More information

TOYOTA 4RUNNER COLD AIR INTAKE FJ CRUISER Preparation

TOYOTA 4RUNNER COLD AIR INTAKE FJ CRUISER Preparation Preparation Part Number: PTR03-89100 Kit Contents Item # Quantity Reqd. Description 1 1 Air Filter (P/N: PTR43-00083) 2 1 Upper Air Box 3 1 Lower Air Box 4 1 Hump Coupler 5 1 Throttle Body Coupler 6 1

More information

Trike Conversion Kit GL1500 Goldwing

Trike Conversion Kit GL1500 Goldwing BY Trike Conversion Kit 1988-2000 GL1500 Goldwing Installation Instructions Revised 3-2018 California Sidecar Parts & Technical Support 434.263.8866 Table of contents: 1. Maintenance Schedule 5 2. Disassembly

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 26320 ATTACHMENT KIT 2004 S2000 Issue Date OCT 2003 PARTS LIST CD Changer Attachment Kit: P/N 08B26-S2A-100A Plain washer Template CD

More information

Ford C4 and C6 Floor Mount Automatic Transmission Shifter Installation Instructions

Ford C4 and C6 Floor Mount Automatic Transmission Shifter Installation Instructions Ford C4 and C6 Mount Automatic Transmission Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Ford C4 and C6 Mount

More information

First, check and record the camber and caster readings, they will be adjusted later.

First, check and record the camber and caster readings, they will be adjusted later. First, check and record the camber and caster readings, they will be adjusted later. The caliper-mounting bosses are machined perpendicular to the spindle so they are an excellent place for the level.

More information