PRIMADET non-electric delay detonators Dual StoperTM
|
|
- Rudolph Newman
- 5 years ago
- Views:
Transcription
1 PRIMADET non-electric delay detonators Dual StoperTM Dual DetTM EZ Stoper EZ Platinum trunklinetm function The Dual StoperTM non-electric blast initiation system is a precise, reliable and millisecond accurate system for sequential blasting in underground stoping, bord & pillar and in-stope tunnelling applications. The combination comprises of a Dual DetTM and either an EZ Stoper or EZ Platinum TrunklineTM unit. They provide a fast, simple and cost effective hook-up while allowing an unlimited number of holes to be shot with inherent sequential timing. description The Dual StoperTM non-electric blast initiation systems (EZ Platinum TrunklineTM + Dual DetTM or EZ Stoper + Dual DetTM ) are comprised of the following main components: Shock tube to transmit a signal to the delay cap. The shock tube is a 3mm diameter plastic laminated tube coated inside with a thin layer of HMX / Aluminium dust, which reliably transmits a low energy signal at approximately 2000m/s from one point to another. Due to the shock tube construction and inner Surlyn tube, the low energy signal will propagate through most sharp bends, knots and kinks that may occur in the shock tube. The outer surface of the tube remains intact during and after functioning. The distinguishable tough, orange outer jacket gives excellent abrasive, oil resistant and tensile properties. The EZ Stoper and EZ Platinum TrunklineTM have a precise surface delay. The delay train contains integral delay elements, anti-static protections and patented safety devices. Standard delay times can vary according to requirements and combinations. The EZ Stoper and EZ Platinum TrunklineTM have a surface connector block that is used to attach the surface blasting cap to the next EZ Stoper and Dual DetTM or EZ Platinum TrunklineTM and Dual DetTM in the chain. This surface connector and cap will reliably initiate up to 3 shock tubes if properly connected, in both directions. The EZ Stoper and Dual DetTM have a precise non-electric, in-hole (8D) detonator that will initiate all cap sensitive explosives and ANFO. Standard delay times can vary according to requirements and combinations. Tape used to bind each unit in a coil, facilitating easy deployment and a reduced chance of tangling. A delay tag to indicate the nominal delay time of the detonators.
2 advantages simple/flexible accurate reliable The Dual Stoper TM non-electric blast initiation system is factory assembled to the required length and delay time. They can readily and simply be connected to accommodate both basic and complex stoping, bord & pillar and tunnelling initiation requirements. The Dual Stoper TM non-electric delay detonators are manufactured using the most modern robotic production techniques resulting in extreme accuracy and precision. The Dual Stoper TM non-electric blast initiation system is factory assembled-to-order under stringent quality specifications. Continued technological advancement has resulted in patented design changes providing increased reliability, blast after blast. External layer (over-extruded plastic jacket of low density polyethylene) for abrasion resistance and UV protection Middle layer for tensile strength, elongation and chemical resistance Inner Layer (Surlyn) reliably holds the reactive mixture in place Primadet shocktube properties Tensile strength 18kg Elongation 320% Chemical resistance >24 hours at 70 C Fuel resistance Superior oil / diesel resistance Low reactive material No fumes / gasses Non-electric Immune to radio frequencies Initiation by means of a shock wave No fire risks Robust Will propagate through knots & kinks 2
3 cost effective custom packaging safe The Dual Stoper TM non-electric delay detonators, due to their reliability and sequential firing, provide improvements in advance per blast, hanging wall conditions and fragmentation. Custom packaging densities and combinations are available on request. Cushion Disc* Wipes inside of shell of primary explosives. - Increases shock resistance. - Prevents instantaneous detonation. Sealer Element & Sealer Crimp Maintains constant pressure within detonator as main delay burns. - Improves timing due to consistent pressure within detonator chamber. Starter Element Ensures consistent ignition of less sensitive main delay. - Improves reliability and accuracy of unit. Delay Ignition Buffer* (DIB Screen) Prevents reverse propagation. - Flame from delay cannot initiate shocktube and second detonator. Prevents delay suck-out. - Pyrotechnic delay powder held in place within detonator shell. * Patents. 3
4 applications Above are typical examples of tie-ups using the Dual StoperTM non-electric blast initiation system that could be applied. 4
5 primer assemblies If cartridged explosives are being used as a primer, a hole of the correct length must be punched into the primer using a non-ferrous primer punch. Once the hole has been made, the EZ Stoper or Dual Det TM in-hole detonators can be inserted into the cartridge. The shock tube lead can then be half-hitched around the cartridge, for extra security with regard to detonator pull-out. The primer is then inserted into the charge hole according to the mine standard. If ANFO or pumpable emulsion explosives are used, the EZ Stoper or Dual Det in-hole detonators must be inserted as far as practically possible (bottom third of hole), according to mine standard. Always ensure that there is enough shock tube lead to connect onto the lead of the next unit. important instructions Please note the following: Reverse priming is beneficial as the detonator points towards the explosive column, however priming of the charge hole must be done in accordance with the mine standard. Ensure that the EZ Stoper or EZ Platinum Trunkline TM is properly connected to the next unit(s) ( GRIP IT, CLIP IT, SLIDE IT ). Grip It Clip It Slide It The starter initiator must only be attached, once the entire face has been charged and hooked up. An EZ Platinum Trunkline TM is connected to the first hole(s) to be fired. The detonator of the starter initiator is attached to the EZ Platinum Trunkline TM with the use of an EZ Clip or electrical tape. Instantaneous Electrical Detonator (IED) and EZ Clip Instantaneous Electrical Detonator (IED) and tape Capped Fuse and EZ Clip SafeStart 5
6 Ensure that all the shock tube leads (1-3) are securely clipped into the EZ Platinum Trunkline TM connector block. The detonator of the starter initiator should be covered with mud to prevent shrapnel from damaging any shock tube leads. All detonators (surface and in-hole) are subject to detonation caused by abuse such as impact, tampering and general misuse. Never attempt to disassemble any detonators due to the above reasons. The shock tube should not be cut or damaged as moisture or dirt entering the tube could cause misfires. Holes loaded with this product and awaiting firing should be guarded or barricaded to prevent unauthorised entry, as per mine standard. Always slide the connector block to the collar of the hole after the connection is complete. Only load (1-3) shocktube leads in the EZ Stoper block as excessive loading may & will result in misfires. Always store detonators and explosives separately. Keep accessories away from sparks, flames or any other sources of ignition. Excessive temperatures may result in spontaneous ignition of explosives and accessories. Store explosives and accessories according to the country rules & regulations. packaging information Additional product lengths and packaging densities are available on your request. Please contact your representative. 6
7 standard packaging Dual Stoper (DS) - A Pack Case dimensions 605mm X 315mm X 460mm Product & length EZ Stoper EZ Stoper length Dual Det Dual Det length Units per case (m) (m) Dual Stoper (DS) - A Pack Case dimensions 605mm X 315mm X 460mm Product & length EZ Platinum EZ Platinum Dual Det Dual Det length Units per case Trunkline TM Trunkline TM (m) (m) EZ Stoper - A Pack PT Trunkline - A Pack Case dimensions (mm) 605 X 315 X 460 Case dimensions (mm) 605 X 315 X 460 Product length Units per case Product length Units per case Dual Detonators (BS) Case dimensions (mm) 605 X 315 X 460 Length (m) Units per case
8 colour codes & labelling Connector block colours change according to delay or delay combinations. EZ Stoper Delay combination (ms) Block colour 3800 / 200 White 4000 / 400 Green 1800 / 75 Brown recommended storage, shelf life & transport Dual Stoper TM Recommended storage 6 months (dry, well ventilated) Shelf life 24 months Transport: UN classification 1.1B UN number 0360 Zax number 355A warning and disclaimer All products and equipment manufactured and supplied by Sasol Dyno Nobel shall be used, handled, stored or transported according to the guidelines laid down by the relevant applicable legislation in that country. Explosive accessories should be secured in an explosive magazine. All or any part of the explosive accessories is dangerous and can cause injury or death. If you find any of these items, do not touch them. Instead, immediately report their location and description to the police. To the extent provided for in terms of section 61 of the Consumer Protection Act, 2008, Sasol Dyno Nobel shall not be liable for any damage, whatever its nature, including incidental, consequential and indirect damage caused to buyers or third parties, directly or indirectly arising from or relating to the supply, use or storage of the products and equipment arising after delivery unless caused by Sasol Dyno Nobel s wilful misconduct or gross negligence. *Trademarks are registered or applied marks are licensed to Sasol. 8 Sasol Dyno Nobel (A division of Sasol Chemical Industries Limited 1968/01/391/06) 15 Baker street Rosebank 2196 PO Box 5486 Johannesburg 2000, South Africa +27 (0) Rev 2 September 2013
PRIMADET non-electric delay detonators MS Primadet - millisecond series
PRIMADET non-electric delay detonators MS Primadet - millisecond series function MS Primadet series detonators are used as downlines in opencast mining and quarry operations where point initiation is desired
More informationSafeStart hand held SafeStart Initiators (SI-1)
SafeStart hand held SafeStart Initiators (SI-1) function The hand held SafeStart Initiators (SI-1) is designed to fire a SafeStart instantaneous detonator from a distance of up to 1km away using standard
More informationSHORT DELAY NON-ELECTRIC DETONATORS
Bulgaria, 5300 Gabrovo, 1 Uspeh Str., office 3; phone/fax: +359 66 80 50 11; mobile: +359 888 693123 e-mail: tempus_link@abv.bg MS SHORT DELAY NON-ELECTRIC DETONATORS Product Description MS constitute
More informationNONEL EZ DET. Properties. Technical Information. Nonelectric Blast Initiation System. Your Partner with TOTAL BLASTING SOLUTION
NONE EZ DET Nonelectric Blast Initiation ystem Product Description Nonelectric Delay Detonator NONE EZDET units consist of a length of orange shock tube with a surface detonator attached to one end and
More informationA NEW INITIATION SYSTEM THAT REMOVES THE OUTSIDE OR SURFACE DETONATORS FROM THE UNDERGROUND FACE. M Davis and J Fenwick Master Blaster
A NEW INITIATION SYSTEM THAT REMOVES THE OUTSIDE OR SURFACE DETONATORS FROM THE UNDERGROUND FACE Master Blaster Abstract The underground mining industry in South Africa drills in excess of 120million holes
More informationRoyex Gen II Rock breaking cartridge Technical data sheet
E T K E N T E K N O L O G I Royex Gen II Rock breaking cartridge Technical data sheet Etken Teknolgi Runsätravägen 5 123 63 Farsta, Sweden Tel: 08-94 10 70 www.royexsystem.com 1. Introduction The Royex
More informationORICA NEW ZEALAND WESTPORT - PRICE LIST
ORICA NEW ZEALAND WESTPORT - PRICE LIST MINING SERVICES 1 January 2018 Orica New Zealand Westport 1 January 2018 2 Price List Information Customers are advised that from the 1 January 2018 the revised
More informationKompensator External Low Voltage Heating Cable System
External Low Voltage Heating Cable System LOW VOLTAGE Installation Instructions General Information Kit Contents Qty Description 1 heating cable at pre-determined length Table of Contents General Information........................
More informationOPERATIONS MANUAL LEVER CHAIN HOIST
OPERATIONS MANUAL LEVER CHAIN HOIST IMPORTANT SAFETY INFORMATION Please read, understand and follow all safety information contained in these instructions prior to the use of this hoist. Retain these instructions
More information5.1. EXPLOSIVE TYPES..Elimination of nitroglycerin effects.
CHAPTER 5 EXPLOSIVES AND INInA TING DEVICES 5.0. TYPES OF EXPLOSIVES AND INITIAT- ING DEVICES THAT ARE USED BY THE NCF..Reduced smoke and toxic fumes. 5.1. EXPLOSIVE TYPES..Elimination of nitroglycerin
More informationP O B J E D A-RUDET. BIHNEL 0 ms 4 m
P O B J E D A-RUDET 4 BIHNEL 0 ms 4 m 3 2 1 Blasting caps Blasting caps are used to cause complete detonation of standard explosives. According to the strength e successfully produce to different types
More informationINITIATING SYSTEMS ACCESSORIES RANGE
INITIATING SYSTEMS ACCESSORIES RANGE AUSTRALIA PACIFIC INDONESIA JULY 2016 Electric Exploders Ausdet Stinger SB10 Exploder SAP Code: XEXP10 A capacitor discharge exploder including rechargeable battery
More informationOrica New Zealand National Price List. Dunedin Mining Services
Orica New Zealand National Price List Dunedin Mining Services 1 July 2013 Table of Contents Initiating Explosives... 4 Detonating Cord... 4 Cordtex... 4 Detonators... 4 Exel Range... 4 Exel Millisecond
More informationLab Session #1 Initiation Systems and Types of Explosives
Lab Session #1 Initiation Systems and Types of Explosives The main goal of this laboratory session is to provide a practical experience in the use of different type of explosives and initiations systems.
More informationInstructional Objectives. Science of blasting. Blasting Objectives. Black Powder. Explosive materials. GE 5471 ROCK ENGINEERING CH 13 Blasting
GE 5471 ROCK ENGINEERING CH 13 Blasting Dr. Norbert H. Maerz Missouri University of Science and Technology (573) 341-6714 norbert@mst.edu Instructional Objectives 1. Explain, for a given situation, where
More informationSTANDARD OPERATING PROCEDURE. Standard Operating Procedure No: SOP-001 Version Number: 1.1. Vari-Stem blast hole stemming plug
ABN 24 160 854 544 STANDARD OPERATING PROCEDURE Oresome Products Use ONLY Standard Operating Procedure No: SOP-001 Version Number: 1.1 Date Approved: 15/03/2013 Date for Review: 31/12/2015 Summary: Name
More informationFuel Meter. Instructions - Parts List. Contents B. Model , measures in gallons Model , measures in liters. For metering fuels.
Instructions - Parts List Fuel Meter 311309B For metering fuels. 80 psi (0.55 MPa, 5.5 bar) Maximum Working Pressure Model 260405, measures in gallons Model 260414, measures in liters Important Safety
More informationE*Star Seismic Detonators. Electronic Programmable Detonators.
E*Star Seismic Detonators Electronic Programmable Detonators. Austin Powder E*Star Seismic electronic detonators have been designed for precise control, necessary in producing accurate and consistent seismic
More informationOZM-72 anti-personnel fragmentation mine Compiled by Vanja Jokic using original Russian military sources, 2011
OZM-72 anti-personnel fragmentation mine Compiled by Vanja Jokic using original Russian military sources, 2011 Main characteristics Type..Bounding fragmentation mine with all-round lethal capability Total
More informationTips & Technology For Bosch business partners
Tips & Technology For Bosch business partners Current topics for successful workshops No. 73/2013 Gasoline injection Ignition cables technical information In gasoline engines, the high voltage required
More informationTapecoat. Application Guideline
Tapecoat Application Guideline Hot Applied Tapes 1.0 SCOPE This document contains general instructions and recommended practices for the application of the TC 20 hot applied tape coating system. For assistance
More informationBlizzard, PO Box , Milwaukee, WI UNDERCARRIAGE KIT. Ford Super Duty F-250/350/450/
Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com July 15, 2010 Lit. No. 42172, Rev. 01 30269-1 UNDERCARRIAGE KIT Ford Super Duty F-250/350/450/550 2008 - Installation Instructions
More informationSPECIFICATIONS Horsepower: 1.5 HP Running Maximum PSI: 125 PSI Tank Capacity: 15 Gallons CFM: 6 40 PSI 5 90 PSI
15 GALLON AIR COMPRESSOR Model: 7678 DO NOT RETURN TO STORE Please call 800-348-5004 for parts and service CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials
More information(R86049) WARNING: To reduce the risk of injury, the user must read and understand the operator s manual before using this product.
OPERATOR S MANUAL 12 VOLT LITHIUM-ION BATTERY CHARGER 140446001 (R86049) Your charger has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety.
More information3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary
3M Electrical Tapes Product Selection Guide Insulate & Protect with Quality Tapes Get your hands on 3M Tape! 3M now offers new and experienced electricians a chance to sharpen their skills with the complete
More informationFOSC-100 B/H FOSC-100 B2/H
FOSC-100 B/H FOSC-100 B2/H INSTALLATION INSTRUCTION TC-273-IP Rev A, Mar 2017 www.commscope.com Fiber Optic Splice Closure with integrated organizer system 1 1 General 1.1 The installation instruction
More informationInstallation and Operation Guide
Bus-Scan 500 RF Installation and Operation Guide All Content and Information are Copyright 2018-2019 Robotics Technologies, Inc. Features and Information are subject to change without notice. All Rights
More informationOPERATING MANUAL 18V Ni-Cd Battery Pack
OPERATING MANUAL 18V Ni-Cd Battery Pack 054-3105-6 Toll-free Helpline : 1-800-689-9928 IMPORTANT : Read this Operating Manual carefully before using the charger. Pay close attention to all Safety Instructions,
More informationLoose Parts Note: Determine the left and right sides of the machine from the normal operating position.
Brake Kit Dingo TX 0 & Compact Utility Loader Part No. 0 0 & 0 Loose Parts Note: Determine the left and right sides of the machine from the normal operating position. Description Qty. Use Drive wheel Brake
More informationFLEX CONNECTOR HEAT SHRINK SLEEVE INSTALLATION GUIDE
FLEX CONNECTOR HEAT SHRINK SLEEVE INSTALLATION GUIDE The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the information
More informationUsers Manual. Phase Rotation Indicator
9040 Phase Rotation Indicator Users Manual PN 2438546 April 2005, Rev.2, 5/11 2005-2011 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are
More informationREDI-LINE. Rugged, Reliable, DC to AC Power Conversion ELECTRIC GENERATORS USER'S GUIDE. KARAM A.L.
REDI-LINE ELECTRIC GENERATORS USER'S GUIDE Rugged, Reliable, DC to AC Power Conversion KARAM A.L. www.alternatorstarter.com 1-888-515-2726 REDI-LINE ELECTRIC GENERATOR MODEL INPUT ACTUAL OUTPUT ACTUAL
More informationEC DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY 14 2500W INVERTER GENERATOR IM2500I CERTIFICATE OF GUARANTEE This product is guaranteed for a period of 1 Year, with effect from the date of purchase and applies only to the
More informationModel 1000 Low Profile Tailgate Spreader Receiver Mount
November 1, 2018 Lit. No. 94380, Rev. 06 Model 1000 Low Profile Tailgate Spreader Receiver Mount Installation Instructions Read this manual before installing or operating the spreader. The receiver mount
More informationRECHARGEABLE 24 LED WORK LIGHT
RECHARGEABLE 24 LED WORK LIGHT MODEL 95181 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements; actual product may differ slightly from product described herein. 3491 Mission Oaks Blvd.
More informationRIGID ENTRY BOOT INSTALLATION GUIDE
RIGID ENTRY BOOT INSTALLATION GUIDE The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the information contained
More informationHeat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
More informationVP Remote User s Manual (nvp)
VP Remote User s Manual for Sorenson (nvp) (ntouch VP - nvp ) (Enlarged view) VP Remote User s Manual (nvp) - Pages 1 of 12 - (Rev A, 10/2011) Key location #1: NOTE: If a button has two labels that has
More informationADJUSTABLE ROTARY SCRAPER TOOL SCR USER S GUIDE
ADJUSTABLE ROTARY SCRAPER TOOL SCR-090-225 USER S GUIDE The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the
More informationA Dyno Nobel Overview. Our Company Our Products Our Technology Our Services Your Benefit
A Dyno Nobel Overview Our Company Our Products Our Technology Our Services Your Benefit Our Company Ownership History Statistics Locations Expertise Vision Safety Incitec Pivot Limited Top 40 ASX company
More informationEX Series User Manual
MODELS: EX90L T4 IIB 720 DS, EX90L T4 IIB 1440 SS, EX90L T4 IIC 720 SS EXIN LIGHT EX & INDUSTRIAL LIGHTING EX Series EX90L T4 IIB 720 DS, EX90L T4 IIB 1440 SS, EX90L T4 IIC 720 SS Contents 0. Introduction
More informationDynaCon Instruction Manual
DynaCon Instruction Manual Table of Contents Technical Specification & Warranty.... 3 Construction, Benefits & Safe Operating Procedures... 4 Noise Levels... 5 Installation, Operation & Maintenance...
More informationModel HPX60 Series Automatic Battery Charger User s Manual Rev. 1.0 October 17, 2006
B R A N D Model HPX60 Series Automatic Battery Charger User s Manual Rev. 1.0 October 17, 2006 For Sales, Support and Service phone: 407-331-4793 fax: 407-331-4708 website: www.xenotronix.com email: information@xenotronix.com
More informationPressurized oil drain for collection of used lubricants and anti-freeze.
Instructions - Parts List 24-Gallon (90-Liter) Oil Ace 30864B Pressurized oil drain for collection of used lubricants and anti-freeze. Model 9577 Series A 8 psi (55 kpa,5 bar) Maximum Working Pressure
More information3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project
3M Electrical Markets Division Rubber, Mastic and Specialty Tapes Application Guide Choose the Right Tape for your Electrical Project 2 Table of Contents Insulating and Splicing...4 Scotch Linerless Rubber
More informationPyrohalon. Cables, halogen-free, fire-retardant. Pyrohalon PLUS Fire-resistant cables, halogen-free, fire-retardant
Pyrohalon Cables, halogen-free, fire-retardant www.oktechnology.ru w Pyrohalon PLUS Fire-resistant cables, halogen-free, fire-retardant Disappointing statistics Fire is a great disaster that often cause
More informationLow Profile Tailgate Spreaders SWING AWAY Mount
August 1, 2018 Lit. No. 43269, Rev. 02 Low Profile Tailgate Spreaders SWING AWAY Mount Not for Use on Ford F-250/350/450 2017 Installation Instructions Read this document before installing or operating
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationInstallation and Operation Guide
Bus-Scan CR2 RF Installation and Operation Guide All Content and Information are Copyright 2018 Robotics Technologies, Inc. Features and Information are subject to change without notice. All Rights Reserved.
More informationBlasting in Underground Coal Mines. ACARP Project C20033
Blasting in Underground Coal Mines ACARP Project C20033 Blasting in Coal Mines Modern mechanised coal mines use machines and longwall mining methods to cut solid coal and convey the broken coal out of
More informationHeat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
More informationWelding Clips. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
Welding Clips Model 95637 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationZip-Tex Spray Gun. Instructions A. Model psi (0.86 MPa, 8.6bar) Maximum Working Pressure
Instructions Zip-Tex Spray Gun 311159A - For water-based materials only - (Consult your material supplier for Warnings and Application Requirements) Model 249458 125 psi (0.86 MPa, 8.6bar) Maximum Working
More informationOperator's Manual. Storage System. Ultrasound Probe Cabinet. Manufactured by:
Storage System Ultrasound Probe Cabinet Operator's Manual Manufactured by: CIVCO Medical Solutions 102 First Street South Kalona, IA 52247 USA 319.248.6757 / 800.445.6741 WWW.CIVCO.COM Copyright 2018 All
More informationOperating and Maintenance Instructions. Abteilung TB, Schell Seite 1 8 SERIES 56
Abteilung TB, Schell Seite 1 8 These instructions supersede all earlier instructions, in particular BWS 109-0 till BWS 109-3. For applications in areas with explosion hazard it is obligatory to observe
More information(KERNEL) SAND BLAST CABINET ( 220L ) ASSEMBLY & OPERATION INSTRUCTION
Model 272622 (KERNEL) SAND BLAST CABINET ( 220L ) ASSEMBLY & OPERATION INSTRUCTION (1 st version) October 2014 1 / 12 PRODUCT LIMITED WARRANTY The product is guaranteed for 12 months from date of manufacturer
More informationINSTALLATION/OWNERS MANUAL
INSTALLATION/OWNERS MANUAL XOBP12D PREPARATION Getting Started Thank you for purchasing the Dual Electronics XOBP12D Bandpass Subwoofer System. Although Dual has attempted to make sure all of the information
More informationModel , Series A 9 in. (23 cm) roller frame with 45 angle and 12 in. reach 1/2 in. (13 mm) nap roller cover
Operating Instructions 309899 Rev. A This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS Manufactured by Model 246818, Series A 9 in. (23 cm) roller frame
More informationAnalysing Accuracy and Blast Hole Loading Techniques To Reduce Vibration 2008
Analysing Accuracy and Blast Hole Loading Techniques To Reduce Vibration 2008 Author: Glenn Kiernan Macmahon (N.Z) Ltd Waihi, New Zealand Presenter: Don Baker Newmont Mining Waihi, New Zealand Abstract
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 31129 REARVIEW CAMERA 2006 RL Issue Date OCT 2005 PARTS LIST Attachment Kit P/N: 08B21-SJA-B00 Template Rear camera trim 6-Pin connector
More informationVentureClad Insulation Jacketing Tapes 1577 Series
VentureClad Insulation Jacketing Tapes 1577 Series Technical Data August 2017 Product Description 3M VentureClad Insulation Jacketing System is a zero permeability, all weather, multi-layered laminate
More information3M - A Global, Diversified Technology Company
3M - A Global, Diversified Technology Company Everyday, 3M people find new ways to make amazing things happen. Wherever they are, whatever they do, the company s customers know they can rely on 3M to help
More informationAir Operated Diaphragm Pumps Operating and Maintenance Instructions
Product & Chemical Disclaimer The user must take responsibility in the selection of the products materials of construction. Empire Pumps Ltd will act in an advisory role and offer recommendations; however,
More informationPRESENTATION OF NITROERG S.A. Seminar: Polish Contribution to the EU Raw Materials Initiative Brussels, 6th November, 2017
PRESENTATION OF NITROERG S.A. Seminar: Polish Contribution to the EU Raw Materials Initiative Brussels, 6th November, 2017 Elżbieta Błotny Marketing and Business Development Manager MISSION AND VISION
More information650mA Phase Dimmable LED Driver
Installation Guide DGLC650C18PD PATENT PENDING REGISTERED DESIGN Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU Diginet Control Systems Pty Ltd ABN 89 095
More informationPORTABLE TRASH PUMPS MTP200 MTP300 MTP400
PORTABLE TRASH PUMPS MTP200 MTP300 MTP400 OPERATING & PARTS MANUAL INTRODUCTION This manual provides information and procedures to safely operate and maintain the engine and pump. For your own safety and
More informationModel For petroleum products and other fluids compatible with aluminum and buna-n seals.
Instructions - Parts List Piston Hand Pump 311308C Model 260407 For petroleum products and other fluids compatible with aluminum and buna-n seals. Model 260406 For herbicides and other chemicals or fluids
More informationInstallation Instructions Pro Stick Shifter
Installation Instructions Pro Stick Shifter Part Number 80701, 80702 & 80706 2012, 2010, 2008, 2001, 1998 by B&M Racing and Performance Products The B&M Pro Stick shifter #80701 and #80706 comes equipped
More informationSeries Description. 2 Specifications. Traffic Safety and Security Division. Product Bulletin Series 4000ESV 06/2017
Traffic Safety and Security Division 3M Diamond Grade TM DG 3 Reflective Sheeting Series 4000 Product Bulletin Series 4000ESV 06/2017 1 Description 3M TM Diamond Grade TM DG 3 Reflective Sheeting Series
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing ROXTERTM Hitch Mounted Mud Flaps. Agri-Cover, Inc. proudly manufactured these mud flaps using superior quality materials and workmanship. With proper
More informationABRASIVE BLAST CABINET
Model 272635 (KERNEL) ABRASIVE BLAST CABINET ( 350L ) ASSEMBLY & OPERATION INSTRUCTION (2 nd version) Jan. 2016 1 / 9 PRODUCT LIMITED WARRANTY The product is guaranteed for 12 months from date of manufacturer
More informationPSI Anti-Corrosion Tape
General information Technical specifications Requirement evaluation Application instructions Certificates PSI Anti-Corrosion Tape 8 Pipeline Accessories 85 The Systems PSI anti-corrosion tapes have been
More informationIMPORTANT SAFETY INSTRUCTIONS
Table of Contents Safety... 2 Specifications... 3 Functions... 4 Operation... 5 Maintenance... 7 Warranty... 7 SAFETY SPECIFICATIONS OPERATION MAINTENANCE WARNING SYMBOLS AND DEFINITIONS This is the safety
More informationAPPENDIX B. Demolitions
APPENDIX B Demolitions GENERAL There will be times when you have to use demolitions for: Breaching minefield. Breaching wire obstacles. Clearing landing zones. Blowing holes in walls of buildings. Blowing
More informationBusPro Series Instruction Manual
Test Equipment Auto Meter Products Inc. 413 West Elm Street Sycamore, IL 60178 12 Toll Free (866) 883-TEST (8378) Fax (815)-895-6786 www.autometer.com 2650-505X-10 Rev. E Professional BusPro Series Instruction
More informationCFT24 &CFT230 PART NOS:
FUEL TRANSFER PUMP Model Nos. CFT12, CFT24 &CFT230 PART NOS: 7160010, 7160020 & 7160030 INSTALLATION & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC05/18 REV 5 INTRODUCTION Thank you for purchasing this
More information4000 Series TRS1 Spark Ignited Gas Engine rpm
Designed to meet the future demands of the market for clean, efficient gas fuelled engines for the power generation industry, the Perkins 4016-61TRS 16-cylinder spark ignition gas engine offers high performance,
More informationBranch Splice QS-2001B
Branch Splice QS-2001B Data Sheet 1. Product Description The 3M Branch Splice QS-2001B molded rubber splice kits are designed to connect extruded dielectric power cables rated 15 kv. The basic kits handle
More informationBlizzard, PO Box , Milwaukee, WI UNDERCARRIAGE KIT. Dodge Ram 1500 Mega Cab Installation Instructions
Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com January 1, 2012 Lit. No. 40772, Rev. 01 33883 UNDERCARRIAGE KIT Dodge Ram 1500 Mega Cab 2003-09 Installation Instructions Read this
More informationFIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails
FIST-GSS2 FIST-GSS3 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Mounting the shelf
More informationUtility Mount. Tailgate Spreaders. Installation Instructions CAUTION. Read this document before installing or operating the spreader.
May 15, 2017 Lit. No. 96494, Rev. 01 Utility Mount Tailgate Spreaders Installation Instructions Read this document before installing or operating the spreader. A DIVISION OF DOUGLAS DYNAMICS, LLC SAFETY
More informationGrapple Kit Install & Grapple Bucket Manual
Grapple Kit Install & Grapple Bucket Manual Model # Serial # Rev. 10/13 Rylind Manufacturing, Inc. 2801 Youngfield St Suite 250 Golden, CO 80401 Business/Sales Offices: 303-979-3548 Manufacturing Plant:
More informationFIST-FPS. Front Patching Shelf. Contents. 1 Introduction. 3 Installation of the shelf. 2 General. 1 Introduction
FIST-FPS I N S T A L L A T I O N I N S T R U C T I O N Front Patching Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Side cable termination directly on
More informationRENA AF371Feeder Operating Manual. Feeder. Operating Manual. Manual Part #: M AF371 Operations Rev
Manual Part #: M-3022 Feeder AF371 Operations Rev. 3-16-04 1 RENA AF371 Feeder YOUR RENA AF371 IS DISTRIBUTED BY RENA SYSTEMS INC. SERVICE AND SUPPORT FOR THIS PRODUCT IS PROVIDED BY YOUR RENA DEALER.
More informationOperating Instructions & Parts Manual. Portable Power Supply & Jump Starter ! WARNING
Operating Instructions & Parts Manual Portable Power Supply & Jump Starter Model 80600, 80600R Capacity 6,000 mah US Patent No. 6,531,789 B1 US Patent No. 7,498,798 B2! This is the safety alert symbol.
More informationPORTABLE TRASH PUMPS MDP200
PORTABLE TRASH PUMPS MDP200 OPERATING & PARTS MANUAL INTRODUCTION This manual provides information and procedures to safely operate and maintain the engine and pump. For your own safety and protection
More informationSIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
SIDE-WIND, A-FRAME TRAILER JACK Model 95157 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More information6 & 12 Volt Battery and Systems Tester with 100 Amp Load
6 & 12 Volt Battery and Systems Tester with 100 Amp Load Form No. 841-731 -000 DESCRIPTION This Load Tester tests 6 or 12 volt automotive-size lead-acid batteries under load. It will also test 6 or 12
More informationSpray Nozzle Adapters
INSTRUCTIONS-PARTS LIST 306 788 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. G Supersedes Rev. F DIRECTIONAL
More informationPanel Bonding Adhesive
Panel Bonding Adhesive Technical Data August 2017 Product Description 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. 3M Panel
More informationREINFORCED LOW & HIGH PRESSURE SPRAY/TRANSFER HOSES. One-piece lengths. Service Temperature Range: -40 F (-40 C) to +125 F (+52 C)
Lightweight polyethylene-lined rubber blend hose that is the ideal choice for handling paint and paint-related products in a variety of applications. Tube Co-extruded blue LLDPE/rubber blend. Reinforcement
More information3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable
3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable Data Sheet September 2010 Description 3M Cold Shrink 3-Conductor
More information1000mA - 650mA Phase Dimmable LED Driver
Installation Guide DGLC1000C25PD 1000mA - 650mA Phase Dimmable LED Driver PATENT PENDING REGISTERED DESIGN Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU
More informationMANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING
MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING CARE & SAFETY INSTRUCTIONS 114 CX & M3 SERIES CHAIN BLOCKS 115-117 C SERIES CHAIN BLOCKS 118 MINI II CHAIN BLOCKS 118 LX & L5 SERIES CHAIN BLOCKS
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-U Laminate system for concrete and steel substrates Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates Description
More informationPRO RATCHET UNIVERSAL SHIFTER
Installation Instructions PRO RATCHET UNIVERSAL SHIFTER Fits: GM, Ford and Chryslers w/automatic Transmission See Application Guide for Specific Vehicles Catalog # 80842 WORK SAFELY! For maximum safety,
More informationMSD Pro-Billet Digital E-Curve Distributor PN U.S. Patent
MSD Pro-Billet Digital E-Curve Distributor PN 8394 - U.S. Patent 6820602 Important: Read these Instructions before attempting the installation. Parts Included: 1 - Digital E-Curve Distributor 1 - Rotor,
More informationHYDRAULIC HOSES. FlexIT 018
HYDRAULIC HOSES FlexIT 018 HYDRAULIC HOSES Flexit 018 Intertraco (Italia) S.p.A. Flexible Hoses Catalogue - GSIHFX180 - March 2018 The data reported in this catalogue are not binding. Intertraco (Italia)
More informationPressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -
Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural
More informationSLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks
SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks Instructions June 2002 78-8130-2161-1-B 1 Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Cable Preparation...
More information