Repair Parts Manual ST English

Transcription

1 8 8 - Repair Parts Manual ST Gasoline containing up to 0% ethanol (E0) is acceptable for use in this machine. The use of any gasoline exceeding 0% ethanol (E0) will void the product warranty. Please read the owner's manual carefully and make sure you understand the instructions before using the machine. English

2 HOW TO USE THIS MANUAL This manual is designed to provide the customer with a means to identify the parts on his/her snow thrower when ordering repair parts. The illustrations may or may not represent the actual assemblies; therefore, it is not recommended to use this manual as a guide to assemble or disassemble the snow thrower. Some hardware and parts are drawn larger in order to more readily identify them. Each snow thrower has its own model number. The model and serial numbers will be found on a decal attached to the rear of the snow thrower housing. When ordering parts, always give the following information: Product - SNOW THROWER MODEL NUMBER - ST" (990090) Part Number Part Description TABLE OF CONTENTS AUGER HOUSING / IMPELLER ASSEMBLY...- CONTROL PANEL / DISCHARGE CHUTE...- HANDLES... DRIVE...- CHASSIS / ENGINE / PULLEYS...-9 WHEELS... 0 BAG OF S... DECALS...- ENGINE BREAKDOWN...- WARRANTY...-9

3 REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION AUGER HOUSING 0 8- SCRA PER BAR CARRIAGE BOLT /-8 X. GR - NUT /-8 X X B DESCRIPTION 0- AUGER WELD RIB LH 0- AUGER WELD RIB R H C DESCRIPTION 9-99 TOOL CLEANOUT 0-00 CLIP CLEANOUT TOOL 9-89 SCREW HEX WASHER - X / A NOTE: All component dimensions given in U.S. inches. inch =. mm

4 REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST (990090), PRODUCT D NOTE: All component dimensions given in U.S. inches. inch =. mm

5 REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION GEARBOX AUGER IMPELLER STEEL 8-0 PULLEY IMPELLER SCREW ON CHUTE DISCHARGE BASE BRACKET CORNER DISCHARGE BASE BOLT SHEAR / NUT NYLOCK / NUT FLANGE NYLOCK /-8 - BLK BOLT CARRIAGE WAFER HEAD /-8 X /8 BLK BRACKET BELT KEEPER LOWER BRACKET INTERFACE BEARING BALL -8 SCREW HEX HEAD /-8 X /8 9- NUT FLANGE NYLOCK /-8 NOTE: All component dimensions given in U.S. inches. inch =. mm

6 REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION PLASTIC RETAINER - AUGER BALL BEARING SCREW HI-LO /- X.00 - BLK SCREW /-0 X NUT / B DESCRIPTION SKID SHOW UHMW BOLT CARR BLK /-8 X NUT HEX /-8 LRG FLG D NOTE: All component dimensions given in U.S. inches. inch =. mm

7 REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION 8-0 CONSOLE BASE MULTICONT GRAY-MS SWITCH GRIP HEATED BLACK SCREW TA SEMI GIMLE /-0 X SCREW HEX WASHER HI-LO - X A DESCRIPTION HUSQVARNA CONSOLE COVER ASM 9-89 SCREW HI-LO - X / CLIP PANEL 8-0 LIGHT ASM LED HUSQ RH 8-0 LIGHT ASM LED HUSQ LH WIRE HARNESS LIGHT & GRIP WIRE HARNESS LIGHT JUMPER B NOTE: All component dimensions given in U.S. inches. inch =. mm

8 REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION LEVER CONTROL DSST LEVER PIVOT CONTROL ASM SCREW HEX HD 0- X.0 - PIN GROOVED E-RING A DESCRIPTION LEVER CONTROL SPEED/DEFL 8-0 LEVER CONTROL CHUTE ROT BOLT SHOULDER / SPRING COMPRESSION NUT FL LOCK / BRACE SUPPORT SPEED WASHER. X. X.09 NYLON / C DESCRIPTION 8-0 GRIP HANDLE HEATED -0 SCREW PAN HD TORX /-0 X B NOTE: All component dimensions given in U.S. inches. inch =. mm 8

9 REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST (990090), PRODUCT * * * * * DESCRIPTION 0- CHUTE WELDMENT 8 - DEFLECTOR WELDMENT 0- DEFLECTOR SEAL 8- POP RIVET 0- CHUTE SNOW SHIELD -8 SHIELD STRAP RETAINER CABLE ASM DEFLECTOR - BOWDEN PIN CLEVIS / X PIN CLEVIS / X. 0-0 HAIRPIN RETAINER * 8-0 DEFLECTOR SPRING * SHOULDER BOLT /-0 X. * NUT /-0 * CARRIAGE BOLT /8- X. * NUT /-8 NOTE: ALL ITEMS MARKED WITH AN * ARE PROVIDED IN THE BAG OF ITEMS SHIPPED LOOSE WITH THE PRODUCT C NOTE: All component dimensions given in U.S. inches. inch =. mm 9

10 REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION 80-0 CABLE INTERLOCK - PIN GROOVED E-RING 8-0 SPRING RETURN CLIP CABLE BLACK B NOTE: All component dimensions given in U.S. inches. inch =. mm 0

11 REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST (990090), PRODUCT B DESCRIPTION CABLE CONTROL DRIVE CABLE CONTROL AUGER 8-0 CABLE CONTROL SPEED 8-0 BOLT SHOULDER / CLIP CABLE 8- FASTENER PUSH PIN CLEVIS / 8-0 HAIRPIN PIN CLEVIS / NOTE: All component dimensions given in U.S. inches. inch =. mm

12 REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST (990090), PRODUCT D DESCRIPTION CABLE ROTATOR ASM PIN CLEVIS / X / PIN CLEVIS / X / -0 HAIRPIN SOFT ZINC 8-0 CLIP CONDUIT DOUBLE WASHER PIN CLEVIS / X NOTE: All component dimensions given in U.S. inches. inch =. mm

13 REPAIR S HANDLES SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION 8-0 UPPER HANDLE HANDLE KNOB STD BLACK 9 - BOLT /-8 X. CO NCAVE HEAD C DESCRIPTION 8-0 LOWER TUBE SCREW HEX WASH HD /8- X CHUTE ROTATOR SUPPORT ASM BOLT HEX / C NOTE: All component dimensions given in U.S. inches. inch =. mm

14 REPAIR S DRIVE SNOW THROWER - MODEL ST (990090), PRODUCT C NOTE: All component dimensions given in U.S. inches. inch =. mm

15 REPAIR S DRIVE SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION NUT HEX FLANGE LK / BEARING 9/ I.D. -RSNR - TRUNNION BEARING ASM BOLT CARRIAGE /-8 X. GR HUB RUBBER WHEEL RUBBER WHEEL PLATE E-RING SHAFT TOOTH REDUCTION RETAINING RING -RSNR RUBBER WHEEL RING - NUT HEX FLANGE LK / E-RING RETAINER 8-0 DRIVE SPACER 8-0 DRIVE TORSION SPRING 8-0 YOKE BRACKET WELDMENT FRICTION PULLEY DISC COMBO ROD TIP PLATE FRICTION SWING PLATE PULL LATCH SPRING NUT HEX FLANGE LK /- NOTE: All component dimensions given in U.S. inches. inch =. mm

16 REPAIR S DRIVE SNOW THROWER - MODEL ST (990090), PRODUCT A DESCRIPTION 9-9 WASHER HEX BUSHING SHAFT RETAINER RING 8-0 GEAR 80T DRIVEN - RIVET RD HD DRILLED / DIA -88 RETAINER SPRING SQUARE / X AXLE SHAFT NOTE: All component dimensions given in U.S. inches. inch =. mm

17 REPAIR S CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST (990090), PRODUCT C DESCRIPTION COMPLETE LCT ENGINE FRAME 0-0 ENGINE BOLT /8- X.08 DOGPOINT FRAME COVER 8-0 SHIFTER BRACKET SCREW HEX WASHER /-0 X / WIREFORM SUPPORT CABLE 88- BOLT HEXHD WASHER /-8 X BOLT HEXHD WASHER /-8 X.00 DESCRIPTION SMALL MOUNTING PLATE A NOTE: All component dimensions given in U.S. inches. inch =. mm

18 REPAIR S CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST (990090), PRODUCT J DESCRIPTION 8-0 BELT KEEPER BRACKET 89 - WASHER / X / X GA LOCKWASHER / SPLIT HVY 8 0- CAPSCREW HEXHD /- X. GR IDLER ARM DRIVE WELDMENT NUT NYLOCK / WASHER FLAT.8 X.00 X IDLER PULLEY.0 W/SPACER RETURN SPRING IDLER ARM DRIVE BOLT HEXHD /-8 X. DESCRIPTION SHOULDER BOLT /- X. 8-0 PULLEY ASM IMPELLER DRIVE 9- BOLT HEXHD /8- X ARM IDLER RETURN SPRING IDLER ARM - BUSHING IDLER PIVOT 8 0- BOLT HEXHD /-8 X DRIVE BELT L X IMPELLER BELT IDLER PULLEY.0 FLANGELSS W/SPACER NOTE: All component dimensions given in U.S. inches. inch =. mm 8

19 REPAIR S CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION BELT COVER BLACK BOLT HEX WSH THDRL /-0 X 0-0 CABLE GUIDE 0- PALNUT / IN B NOTE: All component dimensions given in U.S. inches. inch =. mm 9

20 REPAIR S WHEELS SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION WHEEL X.00 NPS LH.00 K WHEEL X.00 NPS RH.00 K C NOTE: All component dimensions given in U.S. inches. inch =. mm 0

21 REPAIR S BAG OF S SNOW THROWER - MODEL ST (990090), PRODUCT C DESCRIPTION BOLT /- 0 X NUT NYLOCK /-0 9- WRENCH BOLT SHOULDER NUT HEX FL /-0 CTR NUT NYLOCK /8-9 - BOLT /-8 X. CONCAVE KNOB /-8 TWO WING BOLT /-8 X NUT FL LOCK / SPRING DEFLECT CHUTE KNOB SOFT TOUCH SLOTTED SUPPORT ROTATION CABLE 8 9 DESCRIPTION 9- WRENCH 8-0 REMOTE SPRING SHOULDER BOLT / LOCKNUT / CARRIAGE BOLT /-8 X / LOCKNUT / LOCKNUT / SHEAR BOLT /-0 X -/ LOCKNUT / A B DESCRIPTION 0-9 SAFETY IGNITION KIT NOTE: All component dimensions given in U.S. inches. inch =. mm

22 REPAIR S DECALS SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION 8 0- DECAL AUGER DECAL CHUTE DECAL AUGER SAFETY DECAL BELT GUIDE A NOTE: All component dimensions given in U.S. inches. inch =. mm

23 REPAIR S DECALS SNOW THROWER - MODEL ST (990090), PRODUCT DESCRIPTION DECAL, DANGER DECAL, DANGER, DEFLECTOR 8 0- DECAL, DANGER DECAL, INSTRUCTION OPERATOR S MANUAL, ENGLISH OPERATOR S MANUAL, FRENCH OPERATOR S MANUAL, SPANISH NOTE: All component dimensions given in U.S. inches. inch =. mm

24 ENGINE, LCT COMPLETE ENGINE GEN II /9/08/cc Snow Engines 9999 Options * * *Included with part # DECALS * *Keys Only (set of ) Carburetor Repair Kit 8 0 ILLUSTRATION FOR REFERENCE PURPOSES ONLY DESCRIPTION 0-8 CYLINDER HEAD ASSEMBLY - 08CC (INCL. GASKET) 0-9 PUSH ROD & PLATE KIT(08CC) (INCL. VALVE COVER GSKT) 0-80 VALVE COVER (08CC) (INCL. GASKET) 8-0 CYLINDER - 08CC GEN LL SNOW 0-8 PISTON & ROD ASSEMBLY (08CC) 0-8 CONNECTING ROD ASSEMBLY (08CC) 0-8 CAMSHAFT - MCR (08CC) FLYWHEEL - ELECTRIC START (-CHARGING MAGNETS) (08CC) COOLLNG FAN - FLYWHEEL (PLASTIC - 08CC) DESCRIPTION 0 - CRANKSHAFT (#8 ED 08CC SUMMER) 8-0 MUFFLER ASSEMBLY-GEN LL SNOW - FUEL TANK (08CC-SNOW) (.L BLACK W/PLASTIC CAP - GEN II) 9- FUEL TANK ON/OFF VALVE - GEN II SNOW 9- FUEL TANK CAP - BLACK CLICK STYLE (VENTED) CARBURETOR (L0-D)W/ SPEED CONTROL (GEN II SNOW08CC W/GSKTS & SPACER) IGNITION COIL (CDI) (08/CC)(HI-TEMP) SPARK PLUG

25 ENGINE, LCT COMPLETE ENGINE-8000 DESCRIPTION 9- ON/OFF SWITCH - ROCKER 9- SHIELD - FLYWHEEL - ELECTRIC START - SNOW - FUEL HOSE KIT (/'' ID X 8MM - SS SNOW) 9-9 SPEED CONTROL BRACKET (FIXED) 9- GOVERNOR GEAR ASSEMBLY (/08CC) GOVERNOR ARM & LINK KIT (08CC SNOW - 00 FIXED RPM) 0-0 GOVERNOR ARM PADDLE 8 9- RECOIL STARTER (ROUND STYLE-BLACK) /08CC GEN II SNOW STARTER CUP (USE WITH ROUND STYLE STARTER) (08CC SNOW) BLOWER HOUSING - 08C MATTE BLACK- ELECTRIC START- SNOW W/ OIL DRAIN NOTCH CRANKCASE COVER ASSY- HOFT (PRESSED-IN) 08/CC 9-99 OIL SEAL KIT ( PCS FOR /- INCH CRANKSHAFT) 9- SPARK PLUG BOOT - WITH METAL SHIELD (SNOW) - 0V ELECTRIC STARTER (08/CC GEN LL) (MOUNTING BOLTS ON SIDE OF BLOCK) 9-0 ENGINE GASKET KIT (08CC) 09- SMALL BLACK OIL DIPSTICK (PLASTIC) ROCKER ARM KIT (08CC) (INCL. GASKET) 9 9- CHOKE CONTROL KNOB (GEN II RED) NON-REMOVABLE PLASTIC PLUG (/08/CC) - POLY PRE-FILTER (USE WITH ''P'' AIR CLEANER) (/08CC) 9- CDI BOX MTG BRACKET-SNOW 80-0 BREATHER TUBE (/08/CC) 9-9 HIGH OIL-FILL TUBE/DIPSTICK (THREADED) (SN<H09) 8 9- WIRE HARNESS (08CC SNOW) 9-9 OIL DRAIN PLUG W/WASHER (/08/CC) DESCRIPTION 0 - HEATER BOX KIT (GEN LL 08CC SNOW) 9-9 PRIMER BULB WITH HOSE- SNOW 9- SWITCH - SAFETY (PUSH/ PULL) SNOW (INCL. S) 0-9 SET - RED () (SNOW) OIL DRAIN TUBE-SNOW (/08CC) 9-0 CARBURETOR VAPOR SHIELD - 08CC SNOW - CE COMPLIANT MUFFLER SHIELD (08CC) SHIELD - GOVERNOR LINKAGE - 08CC SNOW 9 - FUEL TANK SKIRT (08CCL SNOW) CHARGING COIL (0-WATT AC) (08/CC) - FUEL CONTROL KNOB (GEN II SNOW - RED) 8-99 STARTER GRIP-SNOW (DELUXE) TAPPET KIT (08/CC) (SET OF ) 9 9- CARBURETOR STUDS & COUPLING KIT-SNOW CARBURETOR REPAIR KIT (/08/CC) - STORMFORCE LABEL KIT- 08CC SNOW MUFFLER HEAT SHIELD COVER (/08/) -88 RECOIL BOLT KIT (INCL. () MTG BOLTS) BREATHER TUBE BRACKET CARBURETOR COVER (/08/CC SNOW) WOODRUFF FLYWHEEL S (-PACK) (XX8MM) CARBURETOR SPACER (08/CC) FUEL TANK STRAINER CYLINDER HEAD BOLT KIT () (-9-08-CC) CC COVER BOLT KIT () (9-08-CC) MUFFLER MTG STUD KIT () HIGH ALTITUDE JET (>,000 FEET)(08CC L0- CARBURETOR)

26 Consumer Wheeled Products - Limited Warranty Husqvarna warrants to the original retail purchaser that this Husqvarna product is free from defects in material or workmanship under normal use and maintenance from the date of retail purchase for the applicable Warranty Period shown on Exhibit A. This Limited Warranty may not be transferred to any subsequent purchaser of this Husqvarna product. Certain components (e.g., engines and transmissions) are excluded from coverage, and other limitations apply, as described in this document. Husqvarna will repair or replace at its discretion, any defective product or part covered by the Limited Warranty, free of charge at any authorized Husqvarna Servicing Dealer/Center using original OEM Husqvarna replacement parts, subject to the limitations and exclusions described below. Husqvarna does not offer an over-the-counter exchange program. DISCLAIMERS, LIMITATIONS AND EXCLUSIONS. WARRANTY DISCLAIMER. THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY PROVIDED BY HUSQVARNA AND THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF, EXCEPT AS MAY BE PROVIDED BY LAW. THIS WARRANTY IS GIVEN ONLY BY HUSQVARNA, AND MAY BE MODIFIED ONLY BY HUSQVARNA. THIS LIMITED WARRANTY IS THE FINAL EXPRESSION OF OUR AGREEMENT, AND IS A COMPLETE AND EXCLUSIVE STATEMENT OF THE TERMS OF THAT AGREEMENT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY BASED ON LOCALITY. LIMITED DURATION. ANY WARRANTY THAT MAY BE IMPLIED BY LAW (INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR A ICULAR PURPOSE OR USE AND IMPLIED WARRANTY OF MERCHANTABILITY) IS LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD UNDER THIS LIMITED WARRANTY. SOME LOCALITIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.. EXCLUSIVE REMEDIES. SOME LOCALITIES, INCLUDING THE PROVINCE OF QUEBEC, DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR INJURY TO PERSON OR FOR DAMAGES RESULTING FROM THE FAULT OF THE MANUFACTURER AND/OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. AS SUCH, SOME OF THE FOLLOWING LIMITATIONS MAY NOT APPLY TO YOU. THE ABOVE REMEDIES ARE THE EXCLUSIVE REMEDIES FOR ANY BREACH OF THIS LIMITED WARRANTY. NO OTHER REMEDY, INCLUDING, BUT NOT LIMITED TO ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS SHALL BE AVAILABLE, AND ALL SUCH DAMAGES ARE HEREBY DISCLAIMED.. Engines, Transmissions and certain other components are NOT covered. This Limited Warranty does not cover any of the following: (a) Engines and Attachments.Except where otherwise indicated on Exhibit A, all Engines and Attachments are not covered by this Limited Warranty. In most cases, these items are NOT manufactured by Husqvarna in which case they may be covered separately by their respective manufacturer's warranties if one is provided and included with the product at the time of purchase. All such claims must be submitted and sent to the appropriate manufacturer or as otherwise directed in those separate warranties. Husqvarna is not authorized to handle warranty adjustments or repairs on engines manufactured by Briggs & Stratton, Honda, Kawasaki, or Kohler (Husqvarna does handle warranty issues on engines manufactured by Liquid Combustion Technologies (LCT). Husqvarna does not assume any warranty obligation of the other manufacturers' engines under this Limited Warranty. (b) Transmissions. Except where otherwise indicated on ExhibitA, Transmission / Transaxle (including Drive Systems) are not covered by this Limited Warranty. In most cases, these items are NOT manufactured by Husqvarna in which case they may be covered separately by their respective manufacturer's warranties if one is provided and included with the product at the time of purchase. The following transmission / transaxle manufacturers, Dana, Hydro-Gear, Tuff-Torq provide a warranty for the transmission / transaxle to the ultimate purchaser or to Husqvarna. Husqvarna will assign the transmission / transaxle manufacturer's warranty or any rights thereof to the original purchaser of the unit. To obtain transmission / transaxle warranty service, first contact the retailer who you purchased the unit from. Should you require assistance or have any questions concerning transmission / transaxle warranty coverage, contact Husqvarna directly at our website or call (US) or (Canada) for an authorized Husqvarna service provider. All such claims must be submitted and sent to the appropriate manufacturer or as otherwise directed in those separate warranties. Husqvarna is not authorized to handle warranty adjustments or repairs on transmissions or transaxles. Husqvarna does not assume any obligations under this Limited Warranty for the above listed manufacturers (for exceptions - see Exhibit A). (c) Expendable Parts. This Limited Warranty does not cover general maintenance parts and items ("Expendable Parts"), including without limitation spark plugs, bulbs, filters, lubricants, starter cords, belts, blades, and blade adapters. (d) Emissions Control Components. This Limited Warranty does not cover Emissions control equipment and components to the extent regulated by the U.S. Environmental Protection Agency or similar state, provincial or federal agencies. Such equipment and components are covered by a separate emission control warranty statement supplied with your new product. Please consult this separate warranty statement for details.. Any COMMERCIAL, INSTITUTIONAL, AGRICULTURAL, INDUSTRIAL, INCOME PRODUCING, or RENTAL use will result in either or a Shortened Warranty Period. Depending on the product, there is either NO WARRANTY (whether statutory, contractual or otherwise) or a reduced warranty if the product is used for commercial, institutional, agricultural, industrial, income producing, or rental purposes and, in such circumstances, this Limited Warranty is offered instead of and replaces any warranty regime provided for by law. Please refer to Exhibit A.. Reconditioned or Refurbished Products have a 0 Day Limited Warranty. Under this Limited Warranty, Certified Factory Reconditioned or Refurbished products have a 0 Day Limited Warranty for parts and labor for Non-Commercial Use. Products are only reconditioned at the Husqvarna Factory.. Owner's (Your) Responsibilities. To preserve your rights under this Limited Warranty, you must exercise reasonable care and use of the product, including, following the preventative maintenance, storage, fuel and oil usages as prescribed in the enclosed operator's manual. For example, the following items are the Owner's responsibility and are not covered by this Limited Warranty: a. Set-up and pre-delivery service, and engine tune-ups; b. Adjustments after the first (0) thirty days of purchase and beyond, such as throttle cable, belt guides adjustments; and c. Preventative maintenance as outlined in the operator's manual. In addition, you must cease using the product immediately upon any failure or damage. The product should be taken to an authorized Husqvarna servicing dealer prior to any further use. 8. Damages resulting from normal aging, wear and tear or neglect are NOT covered. The Limited Warranty does not cover damage other than that resulting from defects in material or workmanship. The following are NOT considered defects in material or workmanship, and therefore are NOT covered.

27 (a) (b) (c) Abrasion to mower decks; Tires damaged by external punctures; Natural discoloration of materials due to ultraviolet light; (d) Damage to cutting equipment by way of contact with, rocks, or other non-approved materials and/or structures; In addition, this Limited Warranty does not cover damages, malfunctions or failures resulting from abuse or neglect of the product related to or including any of the following: (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) Failure to provide or perform required maintenance services as prescribed in the operator's manual; Abuse, misuse, neglect, modifications, alterations, normal wear, improper servicing, use of unauthorized attachments, Lack of lubrication or engine failure, due to the use of oils that do not meet Engine manufacturer's specifications; Use of gasohol (fuel containing ethanol), containing methanol (fuel containing wood alcohol). Ethanol fuel E or E8 is NOT approved for use in Husqvarna products. Using E or E8 fuel will cause major engine damage which is NOT covered by this Husqvarna warranty. NOTE: Gasohol (fuel containing ethanol), which contains a maximum 0% ethanol (grain alcohol) is approved. The prescribed mixing ratio of gasoline to oil is 0: and is listed in the Husqvarna oil label and covered in your operator s manual. Use of ether or any starting fluids; Pressure cleaning or steam cleaning the product; Use of spark plugs other than those meeting emission performance requirements listed in the operator's manual; Tampering with engine speed governor or emission components, or running engines above specified and recommended engine speeds as listed in your operator's manual; Operation of the unit with improperly installed/removed or modified cutting shields, guards, or safety devices; Any removed/damaged air filter, excessive dirt, abrasives, salt water, moisture, corrosion, rust, varnish, stale fuel, or any adverse reaction due to incorrect storage procedures; Failures due to improper set up, pre-delivery service or repair service by anyone other than an authorized Husqvarna servicing dealer during the warranty period; Dirt contaminated grease or oil, use of incorrect type of greases or oils, failure to comply with recommended greasing intervals, water or moisture damage, and/or improper storage; Sprayers pumping or spraying caustic or flammable materials, lack of or broken strainers; or Continued use of product, after initial operational problem or failure occurs. 9. Reinforced Stamped (Armor Protected) 0 Year Limited & Fabricated Limited Lifetime, Deck Warranties. These Limited Warranties are for the deck shell only mechanical components/parts such as belts, pulleys, spindle housings, bearings, blades, rods, height adjusters, caster/anti scalp wheels etc are NOT covered. The Limited Lifetime Warranty does not cover damage other than that resulting from defects in material or workmanship. The following are NOT considered defects in material or workmanship, and therefore are NOT covered: (a) Abrasion to mower decks, including sand wear; (b) Damage to cutting equipment by way of contact with, rocks, or other non-approved materials and/or structures; (c) Rust and corrosion; and (d) Natural discoloration of paint or other materials due to ultraviolet light. HOW TO OBTAIN SERVICE 0. Authorized Husqvarna Servicing Dealer/Center. In order to obtain warranty coverage it is your responsibility (at your expense) to deliver or ship your Husqvarna unit to an authorized Husqvarna Servicing Dealer/Center and arrange for pick-up or return of your unit after the repairs have been made. If you do not know the location of your nearest authorized Husqvarna Servicing Dealer, call Husqvarna, at during the hours of 8:00 AM to 8:00 PM Eastern Standard Time, or visit Should you require assistance or have questions concerning this Limited Warranty, you may contact us at (US) or (Canada) during the hours of 8:00 AM to 8:00 PM Eastern Standard Time or contact us through the web at Documentation Required. You must maintain and present Proof of purchase (including date, product model and, if applicable, engine serial number) to an authorized Husqvarna Servicing Dealer for warranty service under this Limited Warranty. Proof of purchase rests solely with you. Husqvarna encourages you to register your product online at (US & Canada) to help ensure, among other things, that you can be notified of important product information. However, registering your product is not a condition of warranty service. Husqvarna Professional Products, NA, Inc. 9 Harris Corners Parkway, Suite 00, Charlotte, NC W 0 IR

28 Product/Component Riding Lawn Tractors: Consumer Wheeled Limited Warranty Chart 0 Consumer (personal, household use only) Commercial (any commercial, professional, institutional, agricultural, or income producing use, other than Rental Use) Exhibit A Rental (any rental usage) Frame, Chassis, Front Axle Years Engine* * * * Transmission (if made by Husqvarna/Peerless) Years Transmission (if third party)** XLS Models only - stamped deck shell. Armor Protected Limited Warranty ** 0 Years ** ** Fabricated Deck shell. Limited Lifetime Warranty *** Battery Year Pro-rated Other Non-Expendable Components Residential Zero Turn Mowers ( RZ Only ) Years Engine* * * * Transmission ** RZ ( & ) RZ (9000 & 9000) - stamped deck shell. Armor Protected Limited Warranty ** 0 Years Fabricated Deck shell. Limited Lifetime Warranty *** Battery Year Pro-rated Other Non-Expendable Components Residential Zero Turn Mowers ( EZ, MZ, M-ZT ) Years Engine* * * * Transmission** (EZ & MZ Zero Turn) Years ** Year ** 90 days Transmission** (M-ZT Zero Turn) Years ** Years ** 90 days MZS, MZS, MZSR, stamped deck shell. Armor Protected Limited Warranty. Product # 90090, 90090, & 0. 0 Years Fabricated Deck shell. Limited Lifetime Warranty *** Battery Year Pro-rated rated Year Pro-rated rated Other Non-Expendable Components Years Year Snow Throwers, Tillers, LE Edger Engine* * * * Auger Gearbox Years 90 days 90 days Other Non-Expendable Components Years 90 days 90 days Tiller Tines *** Walk Behind Mowers, High Wheel Trimmer Engine* * * * Battery Year Pro-rated Other Non-Expendable Components Years Hovering Trimmers Engine* * * * Other Non-Expendable Components Years Year 90 days Front Mounted Deck Riders (0S, 0T, T) Frame, Chassis, Front Axle Years Engine* * * * Transmission ** Battery Year Pro-rated Other Non-Expendable Components Years Cultivators Battery Year Pro-rated Other Non-Expendable Components Years Spreaders Spreader Year Year Year Robotic Mowers Robotic Mower Years 90 days 90 days Battery Year Year Year Consumer Commercial Rental 8

29 Consumer Wheeled Limited Warranty Chart 0 Consumer (personal, Commercial (any commercial, household use only) professional, institutional, agricultural, or income producing use, Product/Component other than Rental Use) Parts & Accessories (if purchased) Accessories (e.g., grass catcher, bumper guard Exhibit A Rental (any rental usage) accessories, etc. Year Parts (e.g., belts, blades, etc.) Parts & Accessories (if replaced in Warranty Service) Replacement parts and/or accessories provided under this Limited Warranty are warranted only for the BALANCE of the warranty period applicable to the part or accessory that was replaced. 90 days See to left See to left See to left Consumer Commercial Rental * See Separate Engine Manufacturer's or Manufacturer's warranty. LCT Engines on specific Snow Throwers & Tillers, warranty through Husqvarna. ** See reference (b) of the warranty statement. RZ - Two () Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network. EZ - One () Year Commercial warranty, parts & labor, with Husqvarna. Two () Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network. MZ - (ZT00 Transmission) One () Year Commercial warranty, parts & labor, with Hydro-Gear Distributor network. (ZT00 Transmission) Two () Years Consumer warranty, parts & labor, with Hydro-Gear Distributor network. M-ZT - (ZT00 transmission) Two () Year warranty, parts & labor, with Hydro-Gear Distributor network. *** "Limited Lifetime Warranty" on Tiller tines and Fabricated Deck shell is for the life of the product or (seven) years after the last date of the complete unit's final production, whichever comes first. Deck Shell replacement will be limited to a maximum of two () decks within the Limited Lifetime Warranty. Armor Protected Stamped Deck Shell Example Below Fabricated Deck Shell Example Below Armor Protected Stamped Deck Shell Reinforced area Stamped Deck Shell below, NOT reinforced No reinforced area 9

30 SERVICE NOTES 0

31 SERVICE NOTES

32 0/0/0 TH