REPAIR PARTS MANUAL MODEL: MC900 FRONT TINE TILLER ALWAYS WEAR EYE PROTECTION DURING OPERATION

Transcription

1 REPAIR PARTS MANUAL MODEL: MC900 FRONT TINE TILLER ALWAYS WEAR EYE PROTECTION DURING OPERATION Rev. 1

2 HANDLE ASSEMBLY FT-handle_assy r1 ITEM MFG. ARIENS NO. NO. PART NO. DESCRIPTION Bracket, Handle Bolt, Carriage 5/1-18 x 1-1/ Grip, Handle Handle, L.H Nut, Hex, Crownlock 5/ Washer 11/3 x 11/1 x 1 Ga Washer 3/8 x 7/8 x 14 Ga Bolt, Hex Head 5/1-18 x 1-1/ Washer, Lock 5/ Nut, Hex 5/ Nut, Hex, Flanged 5/1-18 ITEM MFG. ARIENS NO. NO. PART NO. DESCRIPTION Bolt, Carriage, Gr. 5 5/1-18 x 3/ R Panel, Handle Handle, R.H Tine Control Lever Assembly (Includes Cable) Pin, Pivot Retaining Ring NOTE: All component dimensions are given in U.S. inches. 1 inch = 5.4 mm

3 BELT GUARD AND PULLEY ASSEMBLY Screw Set 5/1-18 x 3/8 Patch Sheave, Engine Screw, Tap Hex Head Bolt, Hex Head 5/1-4 unf x 1/ Bolt, Thd Roller 1/4-0 x -1/ Shield, Inner Belt Guard Screw Hex Wsh Hd #8-18 x 1/ Spacer Split Guard, Belt Pad, Idler Clip, Cable V-Belt Ring, Retainer Sheave, Transmisison Ring, Klip Nut, Hex, Jam 3/ Pulley, Idler Arm, Idler Bolt, Hex Head 3/8-1 x 1-1/ Shaft, Idler Arm Nut, Hex, Jam 5/1-18 NOTE: All component dimensions given in U.S. inches. 1 inch = 5.4 mm 3

4 WHEEL AND DEPTH STAKE ASSEMBLY Pin, Clevis Bolt, Hex Head 5/1-18 x 1-1/ Bolt, Hex Head 5/1-18 x 3/ Nut, Hex 5/ Washer, Lock 5/ Locknut, Washer Insert 3/ Clip, Hairpin Support, Depth Stake, R.H Stake, Depth Pin, Clevis Bolt, Hex Head 3/8-1 x 1-3/ Support, Depth Stake, L.H Spring, Stake Bolt, Shoulder Wheel Bracket, Wheel Nut, Hex, Crownlock 3/ Bolt, Hex Head 5/1-18 x Locknut, Washer Insert 5/ Nut, Hex, Flangelock Washer, 17/3 x 7/8 x 1 Ga. NOTE: All component dimensions are given in U.S. inches. 1 inch = 5.4 mm 4

5 TINE ASSEMBLY tine_ipb_ Tine, Outer, R.H Retainer, Spring Tine, Inner, R.H Tine, Inner, L.H Tine, Outer, L.H Pin, Clevis 5

6 TRANSMISSION Bolt, Hex Head, Gr. 5/1-18 x 1-1/ Bolt, Hex Head, 3/8-1 x 3-1/ Washer, 3/3 x 13/1 x Nut, Hex, Flangelock 3/ Shield, Tine Bracket, Engine, R.H Bracket, Engine, L.H Nut, Hex, Flangelock Bolt, Shoulder Transmission Spacer, Split Washer, 9/3 x 7/8 x 1 Ga Washer, 9/3 x 1-1/4 x 1 Ga Washer, Lock 1/ Bolt, Hex Head, Gr. 51/4-8 x 3/ Engine, LCT, Model Number PLMHK140014P-BPQE (Order parts from engine manufacturer) NOTE: All component dimensions are given in U.S. inches. 1 inch = 5.4 mm

7 DECALS Decal, Console Decal, Belt Guard Decal, Clutch Operator's Decal, Hand Placement Decal, Engine A/C Decal, Warning Decal, Warning, Rotating Tines Manual, Operator s, English Manual, Operator's Spanish Manual, Repair Parts 7

8 LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materials and work man ship. For a period of one (1) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective due to materials or workmanship. This Warranty is subject to the following limitations and exclusions. 1. This warranty does not apply to the engine, transaxle/transmission components, battery (except as noted below) or components parts thereof. Please refer to the applicable manufacturer's warranty on these items.. Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the pur chaser. Transportation charges for any parts submitted for replacement under this warranty must be paid by the purchaser unless such return is requested by the manufacturer. 3. Battery Warranty: On products equipped with a Battery, we will replace, without charge to you, any battery which we find to be defective in manufacture, during the first ninety (90) days of ownership. After ninety (90) days, we will exchange the Battery, charging you 1/1 of the price of a new Battery for each full month from the date of the original sale. Battery must be maintained in accordance with the instructions furnished. 4. The Warranty period for any products used for rental or commercial purposes is limited to 90 days from the date of original purchase. 5. This Warranty applies only to products which have been properly assembled, adjusted, operated, and main tained in accor dance with the instructions furnished. This Warranty does not apply to any product which has been subjected to alteration, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear of the product.. Exclusions: Excluded from this Warranty are belts, blades, blade adapters, normal wear, normal adjustments, stan dard hardware and normal maintenance. 7. In the event you have a claim under this Warranty, you must return the product to an authorized service dealer. Should you have any unanswered questions concerning this Warranty, please contact: HOP Outdoor Products Customer Service Dept Harris Corners Parkway Charlotte, NC 89 USA In Canada contact: HOP 5855 Terry Fox Way Mississauga, Ontario L5V 3E4 giving the model number, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was purchased. THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL DAMAGES AND ANY IMPLIED WAR RAN- TIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN FOR OUR EXPRESSED WARRANTIES. Some areas do not allow the limitation of consequential damages or limitations of how long an implied Warranty may last, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from locale to locale. This is a limited Warranty within the meaning of that term as defined in the Magnuson-Moss Act of SR PRINTED IN U.S.A.