3-Pt. Landscape Rake

Transcription

1 3-Pt. Landscape Rake Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 51454, #51455, #51456 SAVE THESE INSTRUCTIONS

2 Thank you very much for choosing a Nortrac product! For future reference, please complete the owner s record below: Serial Number/Lot Date Code: Purchase Date: Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 3-Pt. Landscape Rake is designed for certain applications only. Northern Tool & Equipment is not responsible for issues arising from modification or improper use of this product such as an application for which it was not designed. We strongly recommend that this product not be modified and/or used for any application other than that for which it was designed. For technical questions, please call Page 2 of 14

3 Table of Contents Intended Use... 4 Technical Specifications... 4 Important Safety Information... 4 Specific Operation Warnings... 5 Assembly Instructions... 6 Before Each Use... 8 Operating Instructions... 9 Maintenance Parts Diagram Parts List Replacement Parts Limited Warranty Page 3 of 14

4 Intended Use The NorTrac 3-Pt. Landscape Rake is ideal for grading, leveling, spreading, and removing stones from lawns. It s designed with a 3-point hitch which fits category 1 pins. Technical Specifications Property #51454 #51455 #51456 Ship Weight 207. lbs lbs lbs. Working Width (inches) Max. HP Tines (qty.) Tines per Foot (qty.) Important Safety Information Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this Landscape Rake. Always be aware of the environment and ensure that the tool is used in a safe and responsible manner. Do not allow persons to operate or assemble the rake until they have read this manual and have developed a thorough understanding of how it works. Do not modify this rake in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the rake. There are specific applications for which the rake was designed. Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this rake was designed. It will be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended. Industrial or commercial applications must follow OSHA requirements. WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can result in injury. Using the rake in confined work areas may put you dangerously close to other cutting tools and rotating parts. Do not allow the rake to come into contact with an electrical source. The rake is not insulated and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the rake. Page 4 of 14

5 Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the rake. Do not use the rake while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents on the tool often cover moving parts and should be avoided. Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate. This applies to all persons in the work area. Do not overreach. Keep proper footing and balance at all times. Remove keys or wrenches before connecting the tool to an air supply, power supply, or turning on the tool. A wrench or key that is left attached to a rotating part of the tool may cause personal injury. Secure the work with clamps or a vise instead of your hand when practical. This safety precaution allows for proper tool operation using both hands. PRODUCT USE AND CARE Do not force the rake. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the rake will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Store the rake when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use. Use only accessories that are recommended by the manufacturer for use with your rake. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Specific Operation Warnings To prevent serious injury or death: Page 5 of 14

6 Read and understand the Owner s Manual before operating, servicing, or repairing the equipment. Stop the engine, remove the key, and set the brake before dismounting the tractor. Operate from the tractor seat only. DO NOT operate without guards in place and in good condition. Never allow riders on equipment. Keep bystanders at least 50 feet away while operating. DO NOT operate or transport on steep inclines. DO NOT exceed this implement s maximum speed of 5 MPH. Exceeding this speed may result in loss of control during transport or braking. When using the rear blade in the reverse direction, do not ram large dirt and snow piles. DO NOT use if the implement is damaged. Repair before continuing use. Park and store on a hard, level surface. Store out of reach of children. Not for use by or around children. FALLING OFF CAN RESULT IN IMPALEMENT OR BEING RUN OVER. The tractor must be equipped with a Roll Over Protection Structure (or ROPS CAB) and a seat belt. Keep the foldable ROPS system in the locked up position at all times. Keep the seat belt securely fastened. Never allow riders on equipment. RAISED EQUIPMENT CAN DROP AND CRUSH. Before servicing, follow all instructions and safety rules in this Owner s Manual and securely block all corners of the equipment with jack stands. Securely blocking prevents equipment dropping from mechanical component failures. FALLING OFF OR FAILING TO BLOCK SECURELY CAN RESULT IN SERIOUS INJURY OR DEATH. Assembly Instructions THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE Select an area for assembly that clean and free of any debris which might cause persons working on the assembly to trip. Do not lift heavy parts or assemblies. Use crane jack, tackle, fork trucks or other mechanical device. Never put hands, or any part of body, under blocked up assemblies if at all possible After completing assembly, thoroughly inspect the machine to be sure that all nuts, bolts, hydraulic, fittings or any other fastened assemblies have been thoroughly tightened. Before operating equipment--if you have any questions regarding the proper assembly or operations, contact your dealer or the manufacturer Page 6 of 14

7 1. Take all the components out from the packing crate. 2. Install the tooth support (part No.15) and tines (part No.16) onto the mounting frame, and then tighten them with M10 x 30 bolt and M10 nut. 3. Assemble the main frame weldment (part No.1) with the mounting frame using a slotted nut and draw pin. 4. Assemble the side bars (lift arms) (part No.7) and braces (part No.3) with the main frame weldment. Page 7 of 14

8 Tractor Requirements and Preparation The Landscape Rake fits category 1 hitches. Before Each Use Check the tractor s 3-point hydraulic lift system. It should operate up and down smoothly and have enough power to lift the rake. Refer to your tractor s Owner s Manual or dealer for any adjustments necessary to put the 3-point hydraulic lift system in good working order. Check the tires and rims to make sure they are in good condition. Inflate the tires to the proper recommended air pressure. Smaller tractors may need front counter weights to counter-balance the weight of the implement. Mounted rakes normally require added weight to the tractor to maintain the proper stability and traction during operation and transport. Mounting Instructions Make sure the lower draw pins (pull pins) are installed correctly for your tractor. Insert the draw pins into the ball sockets in the lower lift arms of the tractor s 3-point hitch. Lock into place with linch pins. Attach the mast of the 3-point main frame by installing the tractor s top link with the top link pin. Adjust the top link assembly to obtain the correct angle of the implement. Check the tractor 3-point lift arms and adjust to level the implement from side to side. Never allow anyone to ride or sit on the rake or tractor while in operation. Keep bystanders at a safe distance. Preparation Procedure Thoroughly read and understand this Owner's Manual. UNDERGROUND UTILITIES Contact appropriate agencies to determine if hazardous items are buried under the work area BEFORE OPERATING! Be certain underground utilities have been called to locate underground electric, gas, telephone and other lines. Be sure the operator is properly informed. WHEN IN DOUBT, DO NOT RAKE! Page 8 of 14

9 Check for ditches, stumps, holes, or other obstacles that could cause the tractor to roll. Be sure tractor tires and rims are in good condition. Inflate tires to proper air pressure. All persons should be at least twenty-five feet (25') away during operation. Clear the area of helpers, bystanders, and especially children. Do NOT allow anyone to stand between the hitch and implement. It is recommended that only tractors with wide front axles use the rake. Tricycle front wheel arrangements are inherently unstable and can cause rollover accidents. Make sure all safety stickers are installed and in good condition. Replace if damaged. Check that all equipment is properly installed and securely attached to the tractor. Operating Instructions To prevent property damage, watch for and avoid catching the blade on stumps, large rocks, large dirt piles, and other immovable objects. If you have any questions regarding the proper operation of this rake, contact your dealer or the manufacturer. 1. Set the rake on the ground. Rake about twenty feet, or until you can see what adjustment the rake needs. 2. Adjust the tractor s top link and the rear landslide heel to set the rake frame level end-to-end. 3. The frame should also be level when it s in the ground for in-furrow operation, depending on the furrow depth. Front End Ballast The front end ballast may be required for stability and steering control when the weight is transferred to the back tires as the rake is raised. As a general guide: ballast the tractor (less the rake) so that approximately 1/3 of the tractor weight is on the front tires. When a mounted rake is raised, the resulting load on the front wheels should be less than 20% of the tractor s weight. Add additional ballast as required for stability during operation and transportation. A heavy load can cause instability when driving a tractor. Make sure the front of the tractor is properly counterbalanced with weights. The tractor front end ballast may not always maintain the tractor stability if the tractor is operated on rough terrain at high speeds. In such cases, reduce speed and exercise caution especially around turns. An unstable tractor could steer badly and possibly tip over, causing injury or death. It is essential that everyone involved in the operation, transportation, maintenance, and storage of this equipment be aware, concerned, prudent, and properly trained in safety. Select an area for assembly that is clean and free of any debris which might cause anyone working in the area to trip and fall. Page 9 of 14

10 Do not lift heavy parts or assemblies. Use a crane jack, block and tackle, forklift, or other mechanical lifting device. Never put hands or any other body part under blocked-up assemblies, if at all possible. After completing assembly, thoroughly inspect the machine to be sure that all nuts, bolts, hydraulics, fittings, or any other fastened assemblies have been thoroughly tightened. Stay alert, watch what you are doing, and use common sense when operating this machine. Do not operate while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating may result in serious personal injury. Use safety apparel and equipment. Use safety goggles or safety glasses with side shields which comply with current national standards, or when needed, a face shield. Use as a dust mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate. Keep alert and watch the front as well as the rear when working with the implement. Do not operate close to ditches or creeks. Slow down when operating over rough ground. Always be sure the implement is in the fully raised position when in transport. When removing, changing the angle, or reversing the rake, be sure that your feet are never under the rake. Use extreme caution when backfilling deep holes and trenches. Be careful to avoid catching the rake on stumps or other immovable objects. Use care when working on slopes. Avoid excessive speed during operation. Make adjustments only when the rake is attached to the tractor. When using the rake in a reverse position, use extra care. Do not ram the rake into piles of dirt. Both the tractor lift arms and the rake are not built to take high-impact loads in this position. Ramming backwards can also dislodge operator from seat and/or tractor controls, resulting in possible serious injury or death. The spring steel rake tines in operation may suddenly fling rocks and clods of earth. Keep all bystanders 25 feet or more away from an operating rake. Before operating equipment If you have any questions regarding the proper assembly or operations, contact your dealer or the manufacturer. Maintenance Clean, inspect, service, and make necessary repairs to the rake when parking it for long periods and when parking it at the end of a working season. This will help ensure that the rake is ready for field use the next time you hook up to it. Clean off any dirt or grease that may have accumulated on the rake. Scrape off compacted dirt and then wash the surface thoroughly with a garden hose. 1. Inspect the rake for loose, damaged, or worn parts. Adjust and tighten loose parts or replace if necessary. 2. Clean dirt, oil, and grease from areas where the paint has been worn, chipped, or scratched. Prime any bare metal surfaces after cleaning and repaint to prevent rust. 3. A light coat of oil or grease may be applied to the cutting blade to minimize oxidation. 4. Follow the unhooking instructions when disconnecting the rake from the tractor. Page 10 of 14

11 5. Store the rake in a clean, dry place. Inside storage will reduce the maintenance and make for a longer rake life. 6. Lay the unit on the ground or ensure that the main frame is stable by using auxiliary supports, such as planted posts, to prevent the possibility of the unit tipping over. Parts Diagram Parts List Reference Number Description Quantity 1 Main Frame Weldment 1 2 Lock Nut M Brace 1 4 Pin 2 5 Bolt M16x Draw Pin 2 7 Side Bar 2 Page 11 of 14

12 Reference Number Description Quantity 8 Lock Washer Nut M22x Steel Collar 2 11 Slotted Nut M Bolt M16x Hair Pin 2 14 Nut M10 15 Tooth Support 16 Tooth 4 : 24, 5 :30, 6 : 36 4 : 4, 5 :5, 6 :6 4 : 24, 5 :30, 6 : Tine bar Weldment 1 18 Bolt M10x30 4 : 24, 5 :30, 6 : 36 Replacement Parts For replacement parts and technical questions, please call Customer Service at Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number. The distributor reserves the rights to make design changes and or improvements to product lines and manuals without notice. Page 12 of 14

13 Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or Your ) that the Nortrac product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions. There are no other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose. If the product does not comply with this limited warranty, Your sole and exclusive remedy is that We will, at our sole option and within a commercially reasonable time, either replace the product or product component without charge to You or refund the purchase price (less shipping). This limited warranty is not transferable. Limitations on the Warranty This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to product instructions and in a workmanlike manner. Obligations of Purchaser You must retain Your product purchase receipt to verify date of purchase and that You are the original purchaser. To make a warranty claim, contact Us at , identify the product by make and model number, and follow the claim instructions that will be provided. The product and the purchase receipt must be provided to Us in order to process Your warranty claim. Any returned product that is replaced or refunded by Us becomes our property. You will be responsible for return shipping costs or costs related to Your return visit to a retail store. Remedy Limits Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be liable for: service or labor charges or damage to Your property incurred in removing or replacing the product; any damages, including, without limitation, damages to tangible personal property or personal injury, related to Your improper use, installation, or maintenance of the product or product component; or any indirect, incidental or consequential damages of any kind for any reason. Assumption of Risk You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instructions is at Your own risk. Governing Law This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or consequential damages, so the above limitations may not apply to You. This limited warranty is governed by the laws of the State of Minnesota, without regard to rules pertaining to conflicts of law. The state courts located in Dakota County, Minnesota shall have exclusive jurisdiction for any disputes relating to this warranty. Page 13 of 14

14 Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota Made in China Page 14 of 14