Standards / Verticals
|
|
|
- Anabel Haynes
- 6 years ago
- Views:
Transcription
1 Standards / Verticals SIZE WEIGHT Metric Imperial Metric Imperial Standard.5 m 1'8" 2.73 kg 6 lbs Standard 1 m 3'3" 5.0 kg 11 lbs Standard 1.5 m 4'11" 7.5 kg 16 lbs Standard 2 m 6'7" 9.5 kg 21 lbs Standard 3 m 9'10" 14.3 kg 31.5 lbs The Ring Scaffold system uses hi-strength steel which is mechanically welded with a hot dip galvanized finish. This then offers the highest possible product quality and durability with the least possible maintenance.
2 BASE COLLAR Description Base Collar Weight 3.97 lbs SINGLE TUBE LEDGERS / HORIZONTALS Measure center to center of verticals for ledger length SIZE WEIGHT metric imperial metric imperial Ledger.65 m 2' 1.6" 3.2 kg 7 lbs Ledger m 3' 6" 4.7 kg lbs Ledger 1.15 m 3' 9.1" 5.0 kg 11 lbs Ledger 1.57 m 5' 1.875" 6.5 kg 14.2 lbs Ledger 2.13 m 7' 0" 8.46 kg 18.6 lbs Ledger 2.43 m 8' 9.2 kg lbs Ledger 3.05 m " 11.8 kg 26 lbs
3 SINGLE TUBE LEDGER LOADING CAPACITIES SIZE WEIGHT LOADING CAPACITIES metric imperial metric imperial.65m (2 1.6 ) ledger kn 2400 lbs 5.56 kn 1250 lbs 1.15m (3 9.1 ) ledger 5.73 kn 1280 lbs 2.84 kn 640 lbs 1.57m ( ) ledger 4.48 kn 1000 lbs 2.27 kn 510 lbs 2.13m (7 ) ledger 3.29 kn 735 lbs 1.60 kn 360 lbs 3.05m (10.06 ) ledger 2.24 kn 500 lbs 1.11 kn 250 lbs Safety Factor is 4:1 For all other loading situations call or Ext. 10 ROSETTE TO LEDGER / TRANSOM CONNECTION moment The allowable resisting moment of the ledger / transom to rosette is 475 Nm (4200 lbs).
4 ROSETTE ALLOWABLE LOADS Ring scaffold systems can accommodate up to eight connections of combined ledger and braces. Each of the connections have a safety carry load of kn (2500 lbs). However, the total sum of the ledger loads MUST NOT exceed the recommended leg load for the given bracing situation. SYSTEM SCAFFOLD Engineering Specifications Tube for (vertical) standards and (horizontal) ledgers Outside Diameter 49 mm 1.90 in Wall Thickness 3.18 mm.125 in Yield Strength 345 mpa 50,000 psi Ultimate Strength 483 mpa 70,000 psi Area 451 mm2.699 in2 Moment of Inertia mm4.277 in4 Section Modulus 4768 mm3.291 in2 Radius of Gyration 16 mm.630 in
5 ALLOWABLE LEG LOADS Engineering Specifications The allowable leg-load for Ring System is kn/leg (5,000 lbs/leg) when the following conditions are observed - The vertical unbraced length of the standards is 2.00 meters ( ) - The system is used, erected, and maintained in good working order as per: Manufacturer s Recommendation Local and Provincial Regulations Canadian Standards Association (C.S.A M287) or O.S.H.A. Regulations in the U.S.A.
6 MINIMUM BRACING REQUIREMENTS Engineering Specifications
7 SYSTEM SCAFFFOLD Engineering Specifications External lateral supports shall be installed at vertical intervals, not exceeding three times the minimum width of the structure and at every third bay of scaffolding longitudinally. Engineering Specifications Side Brackets using standard components of ledgers, base collars, and bay braces. Bay Brace One or two bay braces can be used depending on the desired landing. Varies 2m Single Ledger 2m Note: The loading for this application is limited to the capacity of the bay brace, or two bay braces, based on external stability.
8 BAY BRACE / DIAGONAL Engineering Specifications BRACE LENGTH Overall Length Weight Metric Imperial Metric imperial 1.15 m Bay Brace 2258 mm kg 16.2 lbs 1.57m Bay Brace 2482 mm kg 17.2 lbs 2.13 m Bay Brace 2849 mm kg 19.5 lbs 3.05 m Bay Brace 3563 mm kg 23.4 lbs Bay Braces are defined by the horizontal run, or the same as the ledger they work with. The rise on all standard bay braces is 2m (6 7 ).
9 LATTICE GIRDER / PUTLOG OVERALL LENGTH WEIGHT Metric Imperial Metric Imperial Lattice Girder 6.39 m kg 171 lbs Lattice Girder 8.52 m kg 228 lbs Description L Weight kg 14 Lattice Girder Lattice Girder Lattice Girder Lattice Girder
10 TRUSS LEDGERS / BEARERS Engineering Specifications OVERALL LENGTH WEIGHT Metric Imperial Metric Imperial Truss Ledger 2.13 m kg 35 lbs Truss Ledger 3.05 m kg 50 lbs TRUSS LEDGER LOADING CAPACITIES For all other loading situations call or Ext. 10
11 SIDE BRACKETS / CANTELEVER BRACKETS OVERALL LENGTH WEIGHT Metric Imperial Metric Imperial Side Bracket.40 m kg 9 lbs Side Bracket.65 m kg 15.3 lbs Side Bracket.88 m kg 22 lbs Larger brackets can be made by using standard components of ledgers, base collars, and bay braces.
12 SYSTEM ADAPTER CLAMPS SIZE WEIGHT SIZE WEIGHT Metric Imperial Metric Imperial Right Angle Bolt Coupler 50.4 mm kg 3.1 lbs Swivel Adapter Bolt Coupler 50.4 mm kg 3.1 lbs Right Angle Wedge Coupler 50.4 mm kg 2.9 lbs Swivel Adapter Wedge Coupler 50.4 mm kg 2.9 lbs Rigid Beam Clamp 50.4 mm kg 2.9 lbs SW Beam Coupler 50.4 mm kg 2.9 lbs
13 DESCRIPTION STAIRWAYS 7 BAY Engineering Specifications WEIGHT 7 Stair Stringer 45 lbs 32 Stair Tread 17 lbs 10 leg design meets national code TOP VIEW
14 LADDER BRACKETS
15 LADDERS SIZE WEIGHT 3 Ladder 3 14 lbs 5 Ladder lbs
16 DOUBLE LEDGER WITH 10 STYLE Item No. Description A(mm) A(inch) B(mm) B(inch) C(mm) C(inch) weight(lbs S-DL5 5' Double Ledger with 10' style S-DL54 5'4" Double Ledger with 10' style S-DL55 5'5" Double Ledger with 10' style S-DL6 6' Double Ledger with 10' style S-DL7 7' Double Ledger with 10' style S-DL8 8' Double Ledger with 10' style S-DLM M Double Ledger S-DL10 10' Double Ledger with 10' style
17 GALVANIZED STEEL PLANKS
EXCEL MODULAR HORIZONTAL BAR
Part Number Description Vertical Post Spacing Overall Width Tube Weight Galvanized (lbs.) PB24 24", 2-Plank 24 22 17.38 10 PB32 32", 3-Plank 32 30 25.38 10.5 PB36 36" 36 34 29.38 11 PB42 42", 4-Plank 42
Plettac Contur Multidirectional Scaffolding
Plettac Contur Multidirectional Scaffolding - up to eight connections per joint - option to attach horizontals at right angles with high accuracy at the required level - free choice of angles between horizontals
plettac contur Modular Scaffolding
plettac contur Modular Scaffolding www.plettac-assco.de Lo g i c E a s y B e t t e r Issue 07/2014 We reserve the right to amend technical details and measurements. All size, weights and details are approximate
07/ 2012 RPL 070/ 100 FRAME SCAFFOLDING
07/ 2012 RPL 070/ 100 FRAME SCAFFOLDING 10/ 2011 2 Index Frames Steel / Alu Page 4-6 Guard rails; Diagonal braces Page 7 Adjustable base plates; Transoms Page 8 Console brackets Page 9-10 Decks; Access
Accessories.
Accessories www.plettac-assco.de Logic Easy Better Issue 04/2013 We reserve the right to amend technical details and measurements. All size, weights and details are approximate values. System-Free Accessories
Rush and setup xstage S4
Rush and setup xstage S4 S4 is an ideal option for use during the biggest events, thanks to its unique adjustability from 1 m (39.37") up to 2.5 m (98.4") (floor height). Very large adjustability range,
Technical Data MM Channel
Technical Data MM Channel The enclosed pages are taken from the Installation Systems Catalogue 2015 for additional information please visit the technical library at www.hilti.co.uk or call our Technical
Oxbow, SK Edmonton, AB EDITION 8
1 EDITION 8 Oxbow, SK 1 306 483 5055 Edmonton, AB 1 780 809 5055 www.safesmartaccess.ca WWW.SAFESMARTACESS.CA COMPANY PROFILE SAFESMART ACCESS SafeSmart Access is an international manufacturer and importer
Technical Data Sheets
RMD Kwikform Technical Data Sheets Imperial Specification Head Technical Office Brickyard Road, Aldridge, Walsall WS9 8BW, UK. Telephone: +44 1922 743743 Facsimile: +44 1922 743400 Email: info@rmdkwikform.com
Piling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
LAYHER EVENT SYSTEMS CATALOGUE
LAYHER EVENT SYSTEMS CATALOGUE Edition 04.2018 8111.230 Quality management certified according to ISO 9001:2008 Contents PRODUCT PORTFOLIO The Layher Product Range all catalogues at a glance SpeedyScaf
LAYHER EVENT SYSTEMS CATALOGUE
LAYHER EVENT SYSTEMS CATALOGUE Edition 04.2018 Ref. No. 8111.230 Quality management certified according to ISO 9001:2008 Contents COMPANY FROM PAGE 4 STAGES AND STANDS FROM PAGE 16 PODIA FROM PAGE 8 Quality
Valley. Center Pivots. reliable. durable. precise. advanced. responsive
Valley Center Pivots reliable durable precise advanced responsive Durable Valley Structures Designed for Long Life When making decisions that affect your yields and bottom line, look to Valmont Irrigation
We are Manufacturers of Scaffold Fittings, Scaffold Accessories and System Scaffoldings. We are into manufacturing since last two decades.
+91-8048764651 Acme Forgings http://www.acmeforgings.net/ We are Manufacturers of Scaffold Fittings, Scaffold Accessories and System Scaffoldings. We are into manufacturing since last two decades. About
U.S. PATENT NO.: US 7,765,771 TECHNICAL GUIDE SUPERIOR ENGINEERED FLOOR FRAMING SYSTEM
U.S. PATENT NO.: US 7,765,771 TECHNICAL GUIDE SUPERIOR ENGINEERED FLOOR FRAMING SYSTEM SUPERIOR ENGINEERED JOIST SYSTEMS JoistRite is a specially designed, patented, cold-formed steel section that has
LAYHER EVENT SYSTEMS CATALOGUE
LAYHER EVENT SYSTEMS CATALOGUE Edition 04.2015 Ref. No. 8111.227 Quality management certified according to ISO 9001:2008 by German TÜV-CERT Layher QUALITY MADE BY LAYHER ead arter in i en ac Plant 2 in
plettac Aluminium Rolling Towers Logic Easy Better
plettac Aluminium Rolling Towers Logic Easy Better www.plettac-assco.de Issue 4/213 2 We reserve the right to amend technical details and measurements. All sizes, weights and details are approximate values.
ELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
Perf-O Grip Grating & Traction Tread Flooring
GSPOGTT-09 Perf-O Grip Grating & Traction Tread Flooring For Safe Walking-Working Surfaces Table of Contents General Information................................................. 3-4 Load Information.........................................................
Purlins and Girts. A division of Canam Group
Purlins and Girts A division of Canam Group TABLE OF CONTENTS OUR SOLUTIONS AND SERVICES............................................................ 5 Cautionary statement..................................................................
Ma e...te.r: ADJUSTABLE HOUSE STUMPS
ADJUSTABLE HOUSE STUMPS Stronger Easier Faster Ma e...te.r: --, -'-...,.--_ ADJUSTABLE HOUSE STUMPS Stronger Easier Faster I " I " I Stump --117-- 1 1. -- Adjustable Height Top... Al, --... -,. :,½ -,e
LADDERS. Fiberglass Stepladder CSA Grade 1 - RED. Fiberglass Stepladder CSA Grade 1 - YELLOW. Wood Stepladder - 89 Series w/black End Caps
Fiberglass Stepladder CSA Grade 1 - RED Fiberglass Stepladder CSA Grade 1 - YELLOW Non-conducive Fiberglass Rails Double Riveting on each step Heavy duty molded plastic top Back-up Plates Reinforce all
ALUMINUM SCAFFOLDING
ALUMINUM SCAFFOLDING ALUMINUM SCAFFOLDING ADVANTAGES Metaltech s aluminum scaffolds are our lightest range of scaffolding. It is a high strength system, designed for quick and easy assembly. The aluminum
ALUMINUM SCAFFOLDING
ALUMINUM SCAFFOLDING ALUMINUM SCAFFOLDING ADVANTAGES Metaltech s aluminum scaffolds are our lightest range of scaffolding. It is a high strength system, designed for quick and easy assembly. The aluminum
Dock Equipment $ The RIGHT choice for:
The RIGHT choice for: + RIGHT PRODUCT! 40,000+ quality products from leading manufacturers + RIGHT QUALITY! 3+ year guarantee + RIGHT ON TIME! 1 3 day delivery of in-stock products Dock Equipment 8 Dock
LIGHTWEIGHT STEEL FRAMING METRIC SECTION PROPERTIES
C A N A D I A N S H E E T S T E E L B U I L D I N G I N S T I T U T E LIGHTWEIGHT STEEL FRAMING METRIC SECTION PROPERTIES wall stud floor joist track section & bridging channel properties 1 CSSBI 58A-2011
Fabricated from grade S x400 steel box section the extensions are quickly assembled into the required
Description Highly versatile, simple to assemble, heavy duty, modular bracing strut system designed primarily to be used as intermediate struts with MGF hydraulic bracing systems. The system can also be
Quality by Design CAPACITIES FROM 75,000 TO OVER 750,000 BUSHELS VARIETY OF PEAK LOAD RATINGS LARGE ROOF DECKS
Quality by Design CAPACITIES FROM 75,000 TO OVER 750,000 BUSHELS VARIETY OF PEAK LOAD RATINGS LARGE ROOF DECKS For nearly 80 years Behlen Mfg. Co. has focused on meeting customer needs. This is done with
STANDARD SPECIFICATIONS
American National Standard SJI-K 1.1 STANDARD SPECIFICATIONS FOR OPEN WEB STEEL JOISTS, K-SERIES SECTION 1. SCOPE Adopted by the Steel Joist Institute November 4, 1985 Revised to November 10, 2003 - Effective
GENERAL INFORMATION FEATURES.
TECHNICAL GUIDE GENERAL INFORMATION SUPERIOR ENGINEERED JOIST SYSTEMS JoistRite is a specially designed, patented, cold-formed steel section that has one of the highest strength-to-mass ratios of any structural
Visit us on for product news,
2010 LADDERS SCAFFOLDS LIFTS w h e n y o u w i s h t o r e a c h t h e t o p Visit us on www..as for product news, updates and assembly instructions a s a f e a n d s t a b l e w o r k p l a c e w i t
B-LINE SERIES SGPC-16. Safety gratings. Safety gratings. Safety for every walk of life
Safety gratings SGPC-16 B-LINE SERIES Safety gratings Safety for every walk of life Product Applications Grip Strut Eaton s B-Line series safety grating offering is ideal for a wide variety of applications.
EQUIPMENT CATALOG. Steeldeck NY Inc 141 Banker Street Brooklyn New York STAGE
EQUIPMENT CATALOG Steeldeck NY Inc EQUIPMENT LIST Standard Steeldeck Platforms 3 Triangles, Circles & Curves 4 Accessories : Legs, Couplers & Screwjacks 6 Accessories : Casters, Carts & Bracing 7 Accessories
Edition 1 August Overhead Rail System. Models ZRAT, ZRA1, ZRA2 & ZRS2/3
65985 Edition August 007 Overhead Rail System Models ZRAT, ZRA, ZRA & ZRS/ Table of Contents ZRAT Aluminum Rail & Components... Engineering Data for ZRAT Aluminum Rail... How to Order ZRAT Aluminum Runway
SECTION DIMENSIONS & PROPERTIES. Elastic Section Modulus About X-X. Radius of Gyration About X-X. (in 3 ) r x. (in) I y
r h s 6 10 COLD FORMED STRUCTURAL S DIMENSIONS & PROPERTIES IMPERIAL DIMENSIONS PROPERTIES Depth of Flange idth Length of Lip Thickness of Steel Area of Aout - Aout - Aout - Aout - Local of Minor Principal
PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
ARCHITECTURAL ROOF SUPPORTS
SECTION E ARCHITECTURAL A-0 ARCHITECTURAL TABLE OF CONTENTS Thaler Or Equal ARS-100A Floating Walkway Roof Support ARS-102A Fire Route Walkway Roof Supports ARS-115 Rail Post Roof Supports ARS-122 Satellite
Product Selection Guide
WWW.OMEGASCAFFOLDING.COM E-Mail :- info@omegascaffolding.com Product Selection Guide OMEGA SCAFFOLDING SUPPLY INC Reaching the height of excellence Table of Contents About us Frames Braces & Pins Planks
Electrical and Mechanical Supports Systems
Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional
Grip Strut Safety Grating
GSSGST-09 Grip Strut Safety Grating Platforms, Walkways & Stair Treads For The Safest Walking-Working Surfaces Table of Contents & Advantages Advantages............................................. 2 Proof
BRACING STRUT SYSTEMS SECTION 4
BRACING STRUT SYSTEMS SECTION 4 01942 402 704 www.mgf.ltd.uk MGF 200 Series Strut 4.1 MGF 300 Series Strut 4.2 MGF 400 Series Strut 4.3 MGF 600 Series Strut 4.4 MGF 1000 Series Strut 4.5 MGF Bracing Strut
Product Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) Supreme Framing System Product Catalog
12 0 2 / 2009IANT C B I PL COM 2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) R Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What
NEW RESIDENCE - Sample Takeoff UpState Estimating / Material Takeoff
NEW RESIDENCE - Sample Takeoff UpState Estimating / www.upstateestimating.com Material Takeoff _NOTES Floor System By Others Roof System-Stick Built... Verify Header/Beam Sizes... Verify Ridge-Hip-Valley
Supreme. Supreme Framing System. Product Catalog IAPMO UNIFORM ER #0313
Supreme Supreme Framing System Product Catalog IAPMO UNIFORM ER #0313 2507 Table of Contents Certification of Materials 5 LEED Credits 5 Independent Product Certification 5 Code Approvals, Performance
SEISMIC RESTRAINTS Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems
SEISMIC RESTRAINTS Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems SYSTEMS THAT MAKE SENSE INTRODUCTION INTRODUCTION What is Seismic Bracing? Seismic forces are
STEP STOOLS, STANDS & LADDERS
STEP STOOLS, STANDS & LADDERS STEP STOOLS KIK-STEP Extra heavy-duty steel Comes with a double platform with non-slip rubber tread Spring-loaded casters retract under slight pressure, forcing base to the
ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT NARROW FRAMES WALK THROUGH FRAMES
NARROW FRAMES Stud Cent e r ITEM NO DESCRIPTION STUD CENTER WEIGHT NF3H-2W NF5H-2W NF6H-2W NF6H-3W 3 H X 2 W 5 H X 2 W 6 4 H X 2 W 6 4 H X 3 W 2 4 4 4 16 LBS 25 LBS 33 LBS 40 LBS WALK THROUGH FRAMES ITEM
Contents
Contents 1 2-3 4 5 6-7 8 9 10 11 12 13 14 15-19 20-26 27 28 29 30 31 32 33 A Word about Steel Pipe Company Profile & Premises and Plants of Melewar Steel Tube Sdn. Bhd. Main Products Quality Products Quality
IBC 2009/2012 COMPLIANT. Supreme Framing System. Product Catalog
IBC 2009/2012 COMPLIANT 2507 Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What is the Supreme Framing System? Supreme Framing
DEPARTMENT OF MECHANICAL ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING UABMCC01-DESIGN OF MACHINE ELEMENTS QUESTION BANK Prepared By: Dr.S.Prabhakaran, Associate Professor/Mechanical Engg. Unit -1 STEADY STRESSES AND VARIABLE STRESSES
Product Range Handbook
Product Range Handbook 1 Where to find us Building 144 Culham Number 1 Site Station Road CULHAM Oxon OX14 3DA Sales: +44 (0)1865 409300 Fax: +44 (0)1865 407991 2 INDEX PAGE ROUND BARS 4 SQUARE BAR 5 TEES
Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-1ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-2ZI 2.53 1220 0.15
Front-mounted equipment. Fitting front-mounted equipment
Fitting front-mounted equipment Fitting front-mounted equipment This document describes a number of solutions for fitting front-mounted equipment. More information is available in the document Limitations
TRENCH SHIELDING AND SHORING
TRENCH SHIELDING AND SHORING PROSERIES SHIELDS PERFORMANCE DESIGNED FOR TOP PRODUCTIVITY The ProSeries line of trench shields from PRO-TEC incorporates performance features that help deliver outstanding
4.5 COMPOSITE STEEL AND CONCRETE
4.5 COMPOSITE STEEL AND CONCRETE 4.5.1 RULES OF THUMB 4.5 Composite Steel and Concrete (1/11) Typical starting point Overall concrete depth 130mm (Grade 30) Depth of profiled decking 60mm Size beam with
REBAR CONNECTION SYSTEM
REBAR CONNECTION SYSTEM alterations reserved Mar-17 Page 1 PRODUCTS RANGE COUPLERS PSA PSA-PSC TSE PSA-SS Page 7 Page 9 Page 9 Page 10 PSAD TSED PSAG TSEG Page 11 Page 12 Page 13 Page 14 PSAGGD PSA TRANSITION
Analysis Methods for Skewed Structures. Analysis Types: Line girder model Crossframe Effects Ignored
Analysis Methods for Skewed Structures D Finite Element Model Analysis Types: Line girder model Crossframe Effects Ignored MDX Merlin Dash BSDI StlBridge PC-BARS Others Refined model Crossframe Effects
STANDARD PRACTICE INSTRUCTION
STANDARD PRACTICE INSTRUCTION DATE: March 1, 2010 SUBJECT: Ladder Safety Program. REGULATORY STANDARD: 29 CFR 1910.25 Portable Wood Ladders. 29 CFR 1910.26 Portable Metal Ladders. 29 CFR 1926.1052-1060
00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
Technical Data Sheet. British Standards Compliant. TECHNICAL DATA SHEET System 160 (British Standards)
Technical Data Sheet British Standards Compliant Mass 10 System 160 Mass 25 Mass 50 MAT 75 / 125 Superprop Hydraulics Quickbridge MU Falsework MU Bridging Compact Bridging BarrierGuard 800 Instrumentation
CERTIFIED TO ISO 9001:2008 CERT NO:AR 0994
CERTIFIED TO ISO 9001:2008 CERT NO:AR 0994 www.melewar-mig.com MELEWAR STEEL TUBE SDN. BHD. (111059-D) Lot 53 Persiaran Selangor, 40200 Shah Alam, Selangor Darul Ehsan. Malaysia Tel : 603-5519 2455 (12
rough Terrain crane 130 tons
rough Terrain crane 130 tons link-belt rtc-80130ii BOOM LENGTHS: 41 to 162 ft JIB LENGTHS: 31 to 109 ft JIB OFFSETS: 2-15 - 30-45 NOTES: Technical Data Specifications & Capacities 130 US ton 120 metric
WARRANTY AND LIMITATIONS
2 GENERAL INFORMATION QUALITY AND SERVICE COUNT Marino\Ware is proud to present this catalog that details our Lightweight Steel Framing Products. For over 70 years, Marino\Ware has been providing their
ADJUSTABLE-HEIGHT ROLLING A-FRAME
ADJUSTABLE-HEIGHT ROLLING A-FRAME ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual ISO 9001:2008 Registered Manual 103-0105 Effective Date: April 2018 RIGID LIFELINES CONDITIONS OF USE AND
LADDERS & SCAFFOLDING
INDUSTRIAL HEAVY-DUTY FIBREGLASS PRO PLATFORM STEPLADDERS (FXP1700 SERIES) CSA Grade 1A, ANSI Type 1A, 300-lb. Load Rating Super tough copolymer utility top includes multiple tool slots Durable non-conductive
TRENCH SHIELDING AND SHORING
TRENCH SHIELDING AND SHORING THE LEADING PRODUCER & DISTRIBUTOR OF TRENCH SHIELDING & SHORING EQUIPMENT SINCE 1995 Leading producer and distributor of Trench ing & Shoring equipment since 1995 Pro-Tec
DeltaStud - Lightweight Steel Framing
DeltaStud - Lightweight Steel Framing B C H A t P Load Tables for Wind Bearing and Combined Wind & Axial Load Bearing Condition January 2014 Table of Contents Commentary Introduction...3 Product Identification...3
TABLE OF CONTENTS. Safety Grating ALABAMA METAL INDUSTRIES CORPORATION
TABLE OF CONTENTS Safety Grating Page Diamond-Grip Channel... 1-6 Diamond-GripWalkway... 7-8 Safety-Grip Channel... 9-12 Safety-Grip Walkway...13-14 Safety-Tread Channel...15-16 Safety-Tread Flooring...17-18
CABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts
Rapid Lifting Anchor System. Connector Ring Clutch (t)
Rapid Lifting Anchor System The Rapid Lifting System primary purpose is to lift precast concrete with the help of its Rapid anchoring system, comprises of required dynamic load bearing anchor and required
MGF TECHNICAL FILE MGF 600 SERIES STRUT. Description. Product Notes.
Description Simple to assemble, heavy duty, modular bracing strut systems designed primarily to be used as cross struts with the MGF 305/406 UC hydraulic bracing system on major excavations. The system
Design Tables 2015 Formwork and Shoring
Design Tables 2015 Formwork and Shoring Design Tables 2015 e 2 e 1 F 1 F 2 h q A 20 I Q q q x I 2 Q F1 F 1 x I e 1 I Q F2 F 2 x I e 2 I Updated version 1 Edition 09 2015 PERI Formwork Scaffolding Engineering
BRACING STRUT SYSTEMS SECTION 4
BRACING STRUT SYSTEMS SECTION 4 0808 1153 122 design@mgf.ltd.uk mgf.ltd.uk MGF 200 Series Strut 4.1 MGF 300 Series Strut 4.2 MGF 400 Series Strut 4.3 MGF 600 Series Strut 4.4 MGF 1000 Series Strut 4.5
1-3/8" inside-to-inside dimension. length of the leg. S162
Member Designation MEMBER DEPTH: FLANGE WIDTH: STIFFENER LIP: Member Depths are taken in 1/100 inches. Flange Widths are taken in 1/100 inches. Member Flange Width Stiffener Lip (in) For Track Sections,
Dach profile TECHNICAL SPECIFICATIONS OF THE ALUMINIUM DACH PROFILE. s p J W EJ M max Symbols
165 TECHNICAL DATA SHEET 40 40 250 1000 Made in: Aluminium TECHNICAL SPECIFICATIONS OF THE ALUMINIUM DACH PROFILE s p J W EJ M max Symbols s = sheet thickness [mm] [kg/m 2 ] [cm 4 /m] [cm 3 /m] [kn cm
Traction Tread Grating - Design Load Table of Contents & Advantages
- Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57
TRENCH SHIELDING AND SHORING
TRENCH SHIELDING AND SHORING THE LEADING PRODUCER & DISTRIBUTOR OF TRENCH SHIELDING & SHORING EQUIPMENT SINCE 1995 Leading producer and distributor of Trench ing & Shoring equipment since 1995 Pro-Tec
CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 617 SEPTEMBER 1984 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES 617.01 SCOPE 617.02 REFERENCES 617.05 MATERIALS TABLE OF CONTENTS
ETA-5 RAIL SYSTEMS. , Unified Industries, Inc. All Rights Reserved.
RAIL SYSTEMS PAGE 1 TABLE OF CONTENTS PAGE Rail Profiles...2-4 Rail Load Charts...5-6 ETA-4 & Hangers...7-10 Inspection Gate...11 ETA-4 & Load Trolleys...12-15 ETA-4 & Festoon Trolley...16-19 ETA-4 &
www.onlineexamhelp.com UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education MARK SCHEME for the October/November 2010 question paper for the guidance
TITAN BULK DELIVERY SYSTEMS
TITAN BULK DELIVERY SYSTEMS The RWM Titan Bulk Delivery System will save time, space and money for all route delivery companies. The Titan offers maximum maneuverability, zero turning radius and has a
DYWIDAG Marine Tie Rods Smooth Bars & Walings
DYWIDAG Marine Tie Rods Smooth Bars & Walings 2 Contents General Information... 4 Fields of Applications... 4 Overview of Steel Grades... 5 Steel Properties... 5 Thread Creation... 6 Key Advantages of
GENERAL INFORMATION 600-QFH QFJ APPLICATIONS CODES AND STANDARDS PRODUCT DATA
TECHNICAL GUIDE GENERAL INFORMATION The QuickFrame Rough Opening System streamlines installation by reducing the number of components required to frame windows and doors. The QuickFrame system comes in
LINTELS WITH TG. Single Spans. Lintels Supporting Truncated Girder Truss INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2
63 Single Spans INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2 TG Set Back 3.6m Maximum 40 kg/m 2 90 kg/m 2 Restraint value for slenderness calculations is 600 mm. K6 factor of 1.0 used. K23 factor
DESIGN CHART # 1: Lamit Basic S.I.P Properties
DESIGN CHART # 1: Lamit Basic S.I.P Properties LAMIT S.I.P. PROPERTIES - WEAK AXIS ORIENTED PARALLEL TO SPAN Panel Weight Core Facing Moment Section Elastic Shear Shear Radius Allowable Allowable Allowable
Beam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
Safety Grating DIAMOND-GRIP PRODUCT DESCRIPTION FEATURES & BENEFITS MATERIAL SPECIFICATIONS. Note:
DIAMOND-GRIP PRODUCT DESCRIPTION Diamond-Grip is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has
Overview. HDS replaces built-up curtain wall headers. HDS replaces load-bearing box beam headers
Overview The Heavy-Duty Stud (HDS ) Framing System is a high-performance, costeffective, multipurpose, heavy-duty framing stud for headers, jambs, posts and built-up tube truss chords and webs. The superior
,000 psi Minimum Yield Strength. 70,000 psi Minimum Tensile Strength
Commercial Bins/Silos Total Value. Total Systems. Strongest & Heaviest Gauge Tanks in the Industry. A world leader in steel corrugated storage bin manufacturing, GSI offers the strongest and heaviest gauge
THE BEST MOVES IN THE WORLD
THE BEST MOVES IN THE WORLD UNDERHUNG & TOP RUNNING CRANES STACKER CRANE SYSTEMS MONORAILS `SPECIALIZED AVIATION MAINTENANCE CRANES SPECIALIZED LAUNDRY & OVERHEAD MATERIALS HANDLING THE RIGHT MOVE TC/American
X3-R. Garaventa X3-R. Residential Inclined Wheelchair Lift. Design and Planning Guide
X3-R Residential Inclined Wheelchair Lift Garaventa X3-R Design and Planning Guide www.garaventa.ca Table of contents Garaventa - The world s #1 choice for accessibility solutions...2 What is an Inclined
Research on Test Methods of Frame Torsional Rigidity Lu JIA1,2, Huanyun DAI1 and Ye SONG1
International Industrial Informatics and Computer Engineering Conference (IIICEC 2015) Research on Test Methods of Frame Torsional Rigidity Lu JIA1,2, Huanyun DAI1 and Ye SONG1 1 State Key Laboratory of
SELECTING YOUR SPANCO GANTRY CRANE
SELECTING YOUR SPANCO CRANE T SERIES-3-Way Adjustable gantries, fabricated from heavy gauge square mechanical tubing, offer the greatest under I- beam height and range of adjustability. Maximum flexibility
OX DOUBLE SIDED STEP LADDER OX DOUBLE SIDED FIBREGLASS STEP LADDER. Key Features. Specifications. Optional loop handrail gives you 3 point contact!
ACCESS EQUIPMENT OX DOUBLE SIDED FIBREGLASS STEP OX DOUBLE SIDED STEP Optional loop handrail gives you 3 point contact! Fibreglass for electrical work Industrial rated - High wear feet - the highest wearing
recognized as the best in the industry for over 115 years. Each component is designed with greater innovation and manufactured with higher
0-0_q_K //0 : PM Page C R A N E C O M P O N E N T S TM TM THERE S A CRANE SOURCE COMPONENT FOR EVERY JOB. CraneSource crane bridge components have been recognized as the best in the industry for over years.
HEAVY DUTY TRAILERS. FROM 5 t TO 50 t THEY ALL STAND UP TO THE RUGGED DEMANDS OF THE CONSTRUCTION SITE. Heavy duty trailers HEAVY DUTY TRAILERS
Heavy duty trailers FROM 5 t TO 50 t THEY ALL STAND UP TO THE RUGGED DEMANDS OF THE CONSTRUCTION SITE. HTK 195024 Three-way tipper Welded chassis, robust, reliable and durable All vehicles hot-dip galvanized,
GRATE-LOCK PRODUCT SPECIFICATIONS. GRATE-LOCK Plank with Grip or Smooth Surface. 1-1/2", 2-1/2", 3" (4" special order)
QUALITY HOLE PRODUCTS PLANK GRATING McNICHOLS Quality Plank Grating includes a variety of channel configuration choices and walkway styles. Plank Grating is a one-piece construction product that is lightweight
LADDER TYPE TRADE SERIES FIBREGLASS WARTHOG. Optional Levelling Feet. 0.9m - 3.3m, 1.2m - 4.5m 1.5m - 5.7m Step
Choose from our range of TRADE RATED ladder types to suit the intended use. Each ladder type is available within 150Kg Trade Series, 150Kg Fibreglass and / or 180Kg Warthog ranges. LADDER TYPE TRADE SERIES
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged