Rotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing.

Size: px

Start display at page:

Download "Rotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing."

Elfrieda Blake
6 years ago
Views:

1 GMT

Rotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing.

2 Rotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing. The GMT Rotary Indexing Tables are fitted with "VOITH" Hirth radial spur teeth face gear, which ensures; Accurate indexing High repetitive indexing Self centering and Space saving INDEXING CYCLE The Indexing cycle is in four stages 1. The table lifts to clear teeth of the face gear, and engages the drive clutch gear coupling at the same time. Hydraulic rack and pinion drive, with Hydraulic Clamping on face gears is ideally suitable for heavy transported and cutting loads. It has an adjustable speed control and a hydraulic clamping to suit variable operating conditions. Hydraulic clamping ensures that the table will withstand high applied forces and torque. Clockwise and anti-clockwise direction of rotations are available, The tables are controlled externally. INDEXING The number of indexed positions depends upon the number of teeth in the face gears. The smallest increment possible is one tooth. FACE GEAR CLAMPING In the Indexing Cycle the table top is rotated to the required position and then clamped onto face gears. It is now rigidly clamped without any movement to the housing, with an indexing accuracy of ± 3 seconds of an arc. 2. The table top rotates to the indexed position via the rack and pinion drive with regulated speed and end stop control. 3. The table clamps down against face gears for precise centering and positioning, simultaneously disengaging the face clutch. 4. The rack returns to the start position.

INDEX SELECTION Indexing Tables are offered in one of the following versions 1. FIXED positions may be selected with this version within the limits of the number of teeth of the face gears.

The required indexing is determined by a stop, the length of which limits the stroke of the rack. This version is mainly used where only single indexing is required as in special purpose machines. 2.

3 INDEX SELECTION Indexing Tables are offered in one of the following versions 1. FIXED positions may be selected with this version within the limits of the number of teeth of the face gears. TABLE TOP GMT indexing tables are offered with round table tops. T-Slots can be provided as per illustrations. Square table tops can be offered on request. The required indexing is determined by a stop, the length of which limits the stroke of the rack. This version is mainly used where only single indexing is required as in special purpose machines. 2. UNIVERSAL DAMPING AND SPEED OF ROTATION CONTROL The deceleration of the rotating mass at the end of Indexing is achieved by a hydraulic damper. The damper is adjustable to suit various operating conditions and applications, The rotational speed is regulated by a built in throttle valve. The required indexing positioning is determined by a stop, the length of which limits the stroke of the rack. The selection of the required indexing is achieved by rotating the selector knob, which alters the rack stroke in each case, thereby ensuring the number of indexing positions to be achieved. This version is mainly used where various indexed positions are required. Various number of index per ELECTRICAL CONTROLS The indexing cycle is achieved by external electrical controls and external control valves, Proximity switches are provided within a switch box to signal table clamping, declamping, rack forward and rack return. The switch box is easily accessible with plug/socket for limit switch cable outputs. HYDRAULIC POWERPACK The Indexing Tables are operated by Hydraulic Powerpack for routine operation. Capacity of the power back specifications depends on the size of the table.

7 TECHNICAL SPECIFICATIONS LOAD AND FORCE DATA AT WORKING PRESSURE SI. Description Table Size No Max, working force 1 into clamped table top N 20,000 30,000 35,000 40,000 60,000 1,20, Max Transported Load L Placed Centrally over horizontally mounted table top Kg ,000 1,200 2,400 3, Max, Tangential Movement 2 on clamped table top Nm 2,700 10,400 17,000 23,630 58,670 1,20, Max, tilting moment 3 on clamped table top Nm 1,500 5,950 10,000 13,500 33,500 64, Max. tilting moment 4 of transported load L on horizontally mounted raised table top Nm ,400 5,000 5, Max. Transported Load 5 on vertically mounted table top Nm ,030 3, Max. transported load L central within Vertically mounted raised table top Kg ,000 1, Max, tilting moment 6 of transported load On vertically mounted raised table top Nm ,300 2,700 2,700 Working Pressure Bar ACCURACY SI Description Table Size φ No Indexing accuracy Sec ± 3 ± 3 ± 3 ± 3 ± 3 ± 3 2. Indexing accuracy in length of arc Microns ± 2.4 ± 2.9 ± 3.6 ± 4.7 ± 5.8 ± Max, wobble of table top Microns/TIR Repeatability within above tolerances % Plane parallelism of table top/base Microns/TIR Parallelism of base tenon /T slot throat Microns/100 MM/11R Run out of centre bore in table top Microns/TIR Note: DATA VALID AT MAXIMUM WORKING PRESSURE TABLE WEIGHT (approximately) Table Size Ø Table top dia mm Total weight Kg MAXIMUM NUMBER OF INDEXING SELECTION Table Size Ø Selection Range

8 Pallikkaranai, Chennai , INDIA Ph: to 629, Fax: Web: Due to constant development work we reserve the right to depart from catalogue specifications.

Rotary Indexing Table with Face Gear

FIBROTAKT Rotary Indexing Table with Face Gear Product No. 1.001.00.00.00.01000 1 7975 006 4 08/007 Contents FIBRO The latest technology with a tradition of service /3 FIBROTAKT at a glance 4 Technical