CF Back Owners Manual

Transcription

1 CF Back Owners Manual SIZES AVAILABLE: CF Back w/ Fixed Hardware Enclosed In This Box CFBR13S-F - 13 standard height CFBR14S-F - 14 standard height CFBR15S-F - 15 standard height CFBR16S-F - 16 standard height CFBR17S-F - 17 standard height CFBR18S-F - 18 standard height CFBR13M-F - 13 medium height CFBR14M-F - 14 medium height CFBR15M-F - 15 medium height CFBR16M-F - 16 medium height CFBR17M-F - 17 medium height CFBR18M-F - 18 medium height CFBR13L-F - 13 low height CFBR14L-F - 14 low height CFBR15L-F - 15 low height CFBR16L-F - 16 low height CFBR17L-F - 17 low height CFBR18L-F - 18 low height 401 Isom Road, Suite 520 San Antonio, Texas fax info@adirides.com Web: adirides.com

2 CF Back with Fixed Mounting Hardware Figure 1 D. E. A. B. C. F. Parts Detail: CF Back with Fixed Mounting Hardware A. Cap Piece - holds CF Back to back posts with bolts. B. Bolts - bolts fasten bracket clamps on wheelchair back posts. NOTE: Standard and Medium backs use 1 bolt per clamp. Low backs use 2 bolts per clamp. C. Fixed Mounting Bracket - connects to the carbon fiber shell and fastens to bracket clamps with bolts. D. Contoured Foam Pad- held in place by breathable cover. E. Breathable Cloth Cover- covers contoured foam pad and attaches to the carbon fiber shell with Velcro. F. Carbon Fiber Shell- attaches with bracket clamps to back posts of the wheelchair. OTHER ITEMS: Reducer - Use when attaching CF Backs to ¾ (1.91 cm) tubing Allen Wrench 5mm Allen Wrench for tightening and adjusting bolts (part B)

3 Attaching the Fixed CF Back to Your Wheelchair A. Cap Piece B. Bolt C. Fixed Mounting Bracket NOTE: Be sure not to attach or adjust the CF Back while the wheelchair is occupied. Step 1: Step 2: Step 3: Step 4: Step 5: Note: Remove existing wheelchair back support Place the CF Back onto wheelchair back posts. Attach cap piece (part A) by inserting the bolts (Part B). Do not fully tighten. Adjust CF Back vertically for desired back support height. Secure the CF Back by tightening each bolt with the 5mm Allen wrench. (Fully seat the bolt without stripping). Note: recommended bolt torque 6.5 ft-lbs. (8.8 Newton meters). Check the CF Back to make sure it is secured properly. Have the user sit and check the back for comfort. If adjustments need to be made, have user transfer out of the chair and loosen the bolts (part B). Then adjust the CF Back vertically if necessary. Re-tighten bolts when adjustment is complete. Desired seat back angle is achieved by adjusting seat back post with wheelchair manufacturer back post settings.

4 CF Back by ADI About the CF Back: Ergonomically designed, the CF Back promotes an upright posture, easing the strain on the lower back, by providing support at the posterior pelvis and trunk. The carbon fiber material is light weight. The CF Back is easily attached and can be mounted to the necessary height on the back posts of the wheelchair. CAUTION If you are able to fold the back canes, the CF back should be in the folded position when transporting the wheelchair, especially before loading for air travel. Protect the CF Back from blunt force shocks that may cause damage and/or breakage. Always check all hardware to make sure they are securely fastened, before using the CF Back. Do not attach the CF Back with the user in the chair. Do not use CF Back during vehicle transportation. The CF Back may not fit every chair; please consult your clinician or supplier providing your equipment. Only use the hardware supplied with the CF Back on the back; do not substitute any other screws, brackets, or clamps. Use of alternative hardware or mounting voids all warranty. Do not wash in water temperatures above 160F (60C). 250 lbs. ( kg) user weight limit. Altering the CF Back will void warranty.

5 Posterior, Superior, Illiac Spine (PSIS) When positioning the CF Back, the interior portion of the CF Back should be positioned to make contact at the PSIS to provide optimal pelvic support and trunk control. Cleaning the CF Back - Use a soft cloth to clean Carbon Fiber Back shell. - Hand wash foam pad cover with mild soapy water or detergent, and let dry. - Contoured foam pad should not get wet. Note: Institutions MUST clean and disinfect product between multiple patient uses. Do NOT wash or machine dry. Do NOT hand wash in water temperatures above 160 F (70 C). Disinfection- Wipe gently with a cloth dampened with a household disinfectant. Allow foam to air dry thoroughly. DO NOT immerse the foam in water. Return/ Repair Policy All returns require prior authorization from ADI and are subject to a restocking charge. Call TOLL-FREE Visit our website at After authorization has been given, send your CF Back and authorization number to: ADI, 401 Isom Road, Suite 520, San Antonio, Texas Contact Information If you have any questions concerning repairs or the proper care and use of your ADI product, call TOLL-FREE or visit our website at Accessible Designs Inc., 401 Isom Road, Suite 520, San Antonio, Texas 78216

6 Limited 12 - Month Warranty Hard Goods (product made from carbon fiber or metals) Warranty covers any defects in materials or workmanship of its products for one year from the original invoice date. Soft Goods (product made from fabric, foam or plastics) Warranty covers any defects in materials or workmanship of its products for six month from the original invoice date. In the event that defective merchandise is received contact ADI at or cs@adirides.com. A Return Authorization and call tag will be issued. This number must be referenced on the original invoice and included with the product as well as written on the package being returned. Warranty items may be returned for repair or exchange for the same item. ADI reserves the right to determine the condition of returned items. NOTE: Any substitutions of supplied hardware void the warranty. Misuse of items and acts of nature (e.g. flood, tornado, etc.) are not covered by the warranty. If you have questions concerning the Warranty Policy, please contact Accessible Designs, Inc. at or cs@adirides.com. In the UK, contact Boavista Solutions Lda at For UK warranty claims, contact: Boavista Solutions, Lda Rua Eng. Ezequiel de Campos, Zona Industrial do Porto Porto Portugal Disclaimer Any implied warranties, including the MERCHATABILITY and FITNESS FOR A PARTICULAR PURCHASE are also limited to one year from the date of original purchase and any action for a breach of such warranties or any express warranties herein must be commenced within this time. Accessible Designs, Inc. shall not be responsible for any injuries to property, whether as a result of a breach of express or implied warranties, or otherwise. Accessible Designs, Inc. will not be responsible for the results of carless handling, unreasonable or improper use of product.