Fire damper ETPR. Specifications. Product code example Fire damper ETPR

Transcription

1 Fire damper ETPR ETPR fire damper is CE marked based on product standard EN 15650:2010 and tested according to the test standard EN ETPR meets the requirements of fire class EI 60 S / EI 90 S. The damper casing also fulfils the requirements of leakage class C according to EN Fire damper is available both with a built-in electrical actuator and with a fuse mechanism. ETPR fire damper is designed for installation on a wall or intermediate floor for circular duct connection. The damper casing is manufactured from hotgalvanised sheet steel and the blade from fire-insulating calcium silicate material. The fire damper is installed on or remote of the fire compartment construction element according to the installation instructions. The damper is equipped with a Veloduct joint, which provides air tight duct installation. ETPR motorized dampers have passed a durability test of cycles (open/close) and can be used also for daily ventilation purposes. The use of a motorized damper enables automatic function testing (e.g. by our control and monitoring system FICO) and the use of a smoke-detector-based release system. The motor is equipped with built-in microswitches for both open and closed position. When using our control and monitoring system FICO, the actuator is always of type 24 V. See Fläkt Woods control and monitoring system FICO-128 or FICO-2. The damper is also available with electrical actuator of 230 V. The damper version with the fuse mechanism is always equipped with two microswitches (open and close positions). Specifications Sizes Ø mm CE marked (EN 15650:2010) Declaration of Performance 013CPR Fire class according to EN EI 60 (v e - h o i <-> o) S EI 90 (h o i <-> o) S Testing according to EN Fire damper meets the requirements of leakage class 3 according to EN 1751 Fire damper casing meets the requirements of leakage class C according to EN 1751 Maximum pressure against a closed damper is allowed to be 2500 Pa, corresponding to pressure class B Product code example Fire damper ETPR (7) Specifications are subject of alteration without further notice.

2 Technical data - pressure drop, sound data Pressure drop and sound pressure level Sound power level correction by octave bands OCTAVE BAND (Hz) CORRECTION K oct TOLERANCE ± L Woct = L p10a + K oct Definitions q v Air flow l/s, m 3 /h L Woct Sound power level in a duct by db octave bands L p10a Sound pressure level with 4 db db(a) room attenuation (10 m 2 sab) K oct Correction db Δp t Pressure drop Pa 2 (7) Specifications are subject of alteration without further notice.

3 Dimensions and weights, fire classification Dimensions and weights Motorized damper sizes Damper with thermal fuse sizes Size ØD1 A (mm) B (mm) C (mm) D2 (mm) E (mm) L (mm) G max (mm) H (mm) Weight (kg) Motorized damper Weight (kg) Damper with thermal fuse 100 (125) * 465 * * D125 with 2 x reduction pieces BDED Fire classification Size ØD Installation method Flexible wall Rigid wall Rigid floor Remote of Fire resistance wall/floor x x x x EI 60 (ve - ho i<->o) S - - x - EI 90 (ho i<->o) S Underpressure in fire test (Pa) (7) Specifications are subject of alteration without further notice.

4 Description and product code Accessories and spare parts Description Fläkt Woods CE marked fire damper ETPR is suitable for installation into and remote of walls of fire class EI 60 made of concrete, lightweight concrete, brick or gypsum board and into floors of fire class EI 60/EI 90 made of concrete or lightweight concrete. Product code Fire damper Size (aaa) Connection diameter in mm 100, 125, 150, 160, 200, 250, 300, 315, 400, 500, 630 ETPR-aaa-bb-c Actuator (bb) 02 = fuse mechanism 70 C with two microswitches 03 = 24V AC/DC and thermal trip 05 = 230V AC and thermal trip Actuator model (c) 0 = fuse mechanism 2 = motorized Accessories Inspection piece Size (aaaa) Grille Size (aaaa) Control system See a separate brochure. Spare parts Fuse part, 70 C for fuse mechanism Inspection piece FWD-aaaa-1 Ød FWD-aaaa-1 FND-aaaa-1-1 FICO-128 / FICO-2 ETFF ØD L FWD length L consist of pieces BDEG+BDEM+BDET Grille FND-aaaa (7) Specifications are subject of alteration without further notice.

5 Wiring Wiring diagram for damper motor Power supply ~ T AC 230 V AC 24 V DC 24 V Status data of limit switches 1 2 S1 S2 S3 S4 S5 S6 M < 5 < 80 M Thermal trip Tf1 Tf2 Tf3 LED Actuator electrical data Fire damper size Voltage Equipment Max power hold/drive Power for wire sizing V AC/DC Thermal trip 0,8W/2,5W 4 VA V AC Thermal trip 1,1W/3,5W 6,5 VA V AC/DC Thermal trip 1,4W/4,0W 6 VA V AC Thermal trip 2,1W/5,0W 10 VA Storage temperature of fire damper actuator should not exceed +50 C Wiring diagram for microswitches (fuse mechanism) Wiring digram shows the situation where damper blade is in closed position and microswitch (0 ) is activated. I max = 0.1 A Umax = 30 V (AC/DC) 5 (7) Specifications are subject of alteration without further notice.

6 Installation into building elements (walls and intermediate floors) made of concrete, lightweight concrete or brick with fire class EI 60 and into floors with fire class EI 90 Installation into building elements made of gypsum board or similar material with fire class EI 60 Size ØD (mm) Installation opening Ø (mm) 100 (125) * * D125 with 2 x reducer pieces BDED Size ØD (mm) Installation opening Ø (mm) 100 (125) * * D125 with 2 x reducer pieces BDED (7) Specifications are subject of alteration without further notice.

7 Installation remote of building elements (walls and floors) made of concrete, lightweight concrete or brick with fire class EI 60 Installation remote of building elements (walls) made of gypsum board or similar material with fire class EI 60 7 (7) Specifications are subject of alteration without further notice.