ON-OFF. ANSI Class PN SEAT / Soft. Fire Safe. Metal M.I.T.I ISO Standard Specification SS611-2A. Wafer.
|
|
- Tyler Baldwin
- 6 years ago
- Views:
Transcription
1 Standard Specification SS6112A ONOFF ANSI Class PN Wafer SEAT / Soft. Fire Safe. Metal Single Flange FIRE SAFE TALUFT ISO 9001 M.I.T.I
2 Not a Butterfly Valve Ball Valve (Trunnion Type) Compact Light Piping Safety Lower Price Second Eccentricity Double Eccentric Close Primary Eccentricity Open Bidirectional Sealing Avoiding Seat Abrasion We propose you to reduce Initialcost and Runningcost by ONOFF
3 Contents UNIFLOW Construction and Production Range page Soft Single Seat... 4,5 Soft Double Seat... 6,7 Fire Safe Seat... 8,9 Metal Seat... 10,11 UNIFLOW Performance Soft Single Seat Soft Double Seat Fire Safe Seat Metal Seat Flow Characteristics(Cv Value) Pneumatic Rotary Actuator UNIPOWER Construction and Torque UNIPOWER Specifications and Accessories Maintenance Dimensions Automated OnOff UNIFLOW Class 150(PN10/16) 2 (50mm)24 (600mm) with Double act Class 150(PN10/16) 26 (650mm)48 (1200mm)with Double act Class 300(PN25/40) 3 (80mm)24 (600mm)with Double act Class 150(PN10/16) 2 (50mm) 24 (600mm)with Spring ret.(fc) Class 150(PN10/16) 26 (650mm) 48 (1200mm)with Spring ret.(fc) Class 300(PN25/40) 3 (80mm) 24 (600mm)with Spring ret.(fc) Class 150(PN10/16) 2 (50mm) 24 (600mm)with Spring ret.(fo) Class 150(PN10/16) 26 (650mm) 48 (1200mm)with Spring ret.(fo) Class 300(PN25/40) 3 (80mm) 24 (600mm)with Spring ret.(fo) Manual UNIFLOW Class 150(PN10/16) 2 (50mm) 24 (600mm)with Worm Gear Class 150(PN10/16) 2 (50mm) 8 (200mm)with Lock Lever Handle Class 300(PN25/40) 3 (80mm) 6 (150mm)with Lock Lever Handle How to order UNIFLOW (Product Code No.)... 35,36 Instructions for piping... 37,38 Warranty... 39
4 UNIFLOW Construction UNIFLOW SS611E2A Soft Single Seat 4
5 UNIFLOW Standard Production Range UNIFLOW SS611E2A Soft Single Seat Wafer Single Flange Connection Rating ANSI ISO Class 150 Class 150 PN10/16 PN25 300mm) PN10/16 Nominal Size mm(inch) 50(2") 1200(48") 80(3") 600(24") Applied Standards Designed to Face to Face Flange Connection Bonnet ISO 5752/Short ASME / ANSI B mm(14"):Medium ASME / ANSI B16.5, DIN 2501/Sheet 1 ASME B16.47 Series A: Standard(Series B: available upon request) ISO 5211/1 Body Ductile iron, WCB 316SS(Option:304SS) WCB 316SS Disc 316SS(Option: 304SS) Materials Manual Shaft Seat Gland packing Bottom gasket Shaft bearing Actuators Automated OnOff 316SS(Option: 304SS) PTFE PTFE (Double Gland Packing as an Option : Oring/PTFE) (*) PTFE RPTFE/316SS (*)Double Gland Packing: Certified to TALUFT(Technical Guideline for Clean Air Preservation) Pneumatic Rotary Actuators(Double Acting / Spring Return) Electric Motor Actuators Hydraulic Rotary Actuators(Double Acting) Worm Gears / Lock Levers / Ratchet Levers(option) 5
6 UNIFLOW Construction UNIFLOW SS611E2A Soft Double Seat ANSI Class 150, ISO PN10/16 PN25 (smaller than 300mm) ANSI Class 300, ISO PN25/40 6
7 UNIFLOW Standard Production Range UNIFLOW SS611E2A Soft Double Seat Wafer Single Flange Connection Rating ANSI ISO Class 150 Class 300 PN10/16 PN25 300mm) PN25/40 Class 150 Class 300 PN10/16 PN25/40 Nominal Size Applied Standards mm (inch) Designed to Face to Face Flange Connection Bonnet 50(2") 1200(48") ISO 5752/Short 350mm(14"):Medium 80(3") 600(24") 80(3") 600(24") MSS SP68 ASME / ANSI B16.34 ASME / ANSI B16.5, DIN 2501/Sheet 1 ASME B16.47 Series A: Standard( Series B: available upon request) ISO 5211/1 ISO 5752/Short 350mm(14"):Medium MSS SP68 Body Ductile iron, WCB 316SS (Option: 304SS) WCB 316SS WCB 316SS WCB 316SS Disc 316SS(Option:304SS) Materials Disc surface Shaft Sealing Surface Hard Chrome Plated (Up to 300mm or 12") 316SS(Option:304SS) 174PH 316SS 316SS(Option:304SS) 174PH 316SS Seat PTFE/316SS Gland packing Bottom gasket Shaft bearing PTFE (Double Gland Packing as an Option : Oring/PTFE) (*) PTFE RPTFE/316SS Actuators Automated OnOff Manual (*)Double Gland Packing: Certified to TALUFT(Technical Guideline for Clean Air Preservation) Pneumatic Rotary Actuators(Double Acting / Spring Return) Electric Motor Actuators Hydraulic Rotary Actuators(Double Acting) Worm Gears / Lock Levers / Ratchet Levers(option) 7
8 UNIFLOW Construction UNIFLOW SS611E2A Fire Safe Seat ANSI Class 150, ISO PN10/16 PN25 (smaller than 300mm) ANSI Class 300, ISO PN25/40 After Fire 8
9 UNIFLOW Standard Production Range UNIFLOW SS611E2A Everything except for the following specifications the "Soft Double Seat"(See Page 7.) remains unchanged for the Fire Safe Seat. Fire Safe Seat Materials Body Gland packing Bottom gasket Except for Ductile iron Nonasbesto / Grafoil Double Gland Packing as an option : Oring/Nonasbesto/Grafoil (*) Grafoil : Class 150 smaller than 600mm(24") Grafoil/316SS : Class 150 larger than 650mm(26"), Class 300 all sizes (*)Double Gland Packing: Certified to TALUFT(Technical Guideline for Clean Air Preservation) Fire Safe Approvals Applied Standards: American Petroleum Institute(API) Fire Safe for softseated quarterturn valves/api Standard 607, Third Edition, Nov British Standard(BS): Testing of valves/part 2 Specifications for fire type testing requirements BS 6755: Part 2, 1987 Third Party Inspection Authority: Lloyd's Register Approved Range: Tested Rating Class 150 3"(80mm) Approved Range Class 150, 300, PN16, 25, 40 3"(80mm), 4"(100mm), 5"(125mm), 6"(150mm) Sizes 8"(200mm) 16"(400mm) 8"(200mm), 10"(250mm), 12"(300mm), 14"(350mm), 16"(400mm) larger than 16"(400mm) 9
10 UNIFLOW Construction UNIFLOW SS611E2A Metal Seat ANSI Class 150, ISO PN10/16 PN25 (smaller than 300mm) ANSI Class 300, ISO PN25/40 10
11 UNIFLOW Standard Production Range UNIFLOW SS611E2A Metal Seat Wafer Single Flange Connection Rating ANSI ISO Class 150 Class 300 Class 150 PN10/16 PN25 300mm) Class 300 PN25/40 PN10/16 PN25/40 Nominal Size Applied Standards mm (inch) Designed to Face to Face Flange Connection Bonnet Body 50(2") 1200(48") 80(3") 600(24") 80(3") 600(24") ISO 5752/Short 350mm(14"):Medium Ductile iron WCB 316SS (Option: SS304) MSS SP68 ASME / ANSI B16.34 ISO 5211/1 ISO 5752/Short 350mm(14"):Medium ASME / ANSI B16.5, DIN 2501/Sheet 1 ASME B16.47 Series A: Standard(Series B: available upon request) MSS SP68 WCB 316SS WCB 316SS WCB 316SS Disc 316SS(Option: 304SS) Disc surface Sealing surface Hard Chrome Plated Materials Shaft Seat Gland packing Bottom gasket Shaft bearing Actuators 316SS(Option: 304SS) 174PH 316SS 316SS(Option: 304SS) 174PH 174PH for all applications exceeding 300 Inconel Nonasbesto / Grafoil Double Gland Packing as an option: Oring/Nonasbesto/Grafoil(*) Grafoil : Class 150 smaller than 600mm(24") Grafoil/316SS : Class 150 larger than 650mm(26"), Class 300 all sizes 316SS (*)Double Gland Packing: Certified to TALUFT(Technical Guideline for Clean Air Preservation) 316SS Automated OnOff Manual Pneumatic Rotary Actuators(Double Acting / Spring Return), Electric Motor Actuators, Hydraulic Rotary Actuators(Double Acting) Worm Gears / Lock Levers / Ratchet Levers(option) 11
12 UNIFLOW Performance UNIFLOW SS611E2A Soft Single Seat 1. Seat Performance (1) Bidirectional Sealing (2) Leakage Standard : Zero Leakage <Application> Fluids: Liquid, Gas Pressure/Temperature Rating: See the diagram. Pressure/Temperature Rating ANSI Class 150(PN10/16) Maximum differential pressure when pressurized with shaft upstream: upto 50% of the listed rating. For application in the slashedline area: To be consulted to us. This is for OnOff application. If the valve is used always with a slightly open degree, you are requested to consult us. (3) Seat Life : After 100,000 cycles Leakage in case of clean air : less than 5cc/min./inch Leakage in case of clean water : 0cc/min./inch 2. Sealing at Gland (1) Leakage Standard : Zero Leakage (2) Seal Life : 500,000 cycles Leakage in case of clean air : Zero 3. Function Performance Life : 1,000,000 cycles 12
13 UNIFLOW Performance UNIFLOW SS611E2A Soft Double Seat 1. Seat Performance (1) Bidirectional Sealing (2) Leakage Standard : Zero Leakage <Application> Fluids: Liquid, Liquid gas,gas,steam 150 Pressure/Temperature Rating ANSI Class 150(PN10/16) Pressure/Temperature Rating: See the diagram. Maximum differential pressure when pressurized with shaft upstream: upto 50% of the listed rating. For application in the slashedline area: To be consulted to us. This is for OnOff application. If the valve is used always with a slightly open degree, you are requested to consult us. (3) Seat Life : After 100,000 cycles Leakage in case of clear air : less than 5cc/min./inch Leakage in case of clear water : 0cc/min./inch ANSI Class 300(PN25/40) 2. Sealing at Gland (1) Leakage Standard : Zero Leakage (2) Seal Life : 500,000 cycles Leakage in case of clear air : Zero 3. Function Performance Life : 1,000,000 cycles 13
14 UNIFLOW Performance UNIFLOW SS611E2A Fire Safe Seat 1. Seat Performance (1) Bidirectional Sealing (2) Leakage Standard : Zero Leakage In case of fire: less than 400cc/min./inch(water) acc to API/BS standards <Application> Fluids: Flammable,Toxicfluids, Liquid gas,gas,steam 200 "Fire Safe" is a construction of protecting the seat from excessive flow leakage in case of fire. Pressure/Temperature Rating ANSI Class 150(PN10/16) Pressure/Temperature Rating: See the diagram. Maximum differential pressure when pressurized with shaft upstream: upto 50% of the listed rating For application in the slashedline area: To be consulted to us. This is for OnOff application. If the valve is used always with a slightly open degree, you are requested to consult us. (3) Seat Life : After 100,000 cycles Leakage in case of clear air : less than 2.5cc/min./inch Leakage in case of clear water : 0cc/min./inch 2. Sealing at Gland (1) Leakage Standard : Zero Leakage In case of fire: less than 100cc/min./inch(water) acc to API/BS standards (2) Seal Life : 500,000 cycles Leakage in case of clear air : Zero 3. Function Performance Life : 1,000,000 cycles ANSI Class 300(PN25/40) 14
15 UNIFLOW Performance UNIFLOW SS611E2A Metal Seat 1. Seat Performance (1) Bidirectional Sealing (2) Leakage Standard : 12" : ANSI/FCI 702 Class VI(option), 12": ANSI/FCI 702 Class V, 14" : ANSI/FCI 702 Class IV x 10 1 <Application> Pressure/Temperature Rating ANSI Class 150(PN10/16) Fluids: Gas, Steam, Liquid, Liquid gas Pressure/Temperature Rating: See the diagram. Maximum differential pressure when pressurized with shaft upstream: upto 50% of the listed rating This is for OnOff application. If the valve is used always with a slightly open degree, you are requested to consult us. (3) Seat Life : 12" : 180,000 cycles (less than Class V x 10/clean water) 14" : 100,000 cycles (less than Class IV x 10 1 /clear water, clean air) 2. Sealing at Gland ANSI Class 300(PN25/40) (1) Leakage Standard : Zero Leakage (2) Seal Life : 500,000 cycles Leakage in case of clear air : Zero 3. Function Performance Life : 1,000,000 cycles 15
16 UNIFLOW Performance Cv Values vs. Travel Position ANSI Class 150/300, ISO/DIN PN10/16/25/40 UNIFLOW SS611E2A Size ISO/ Angle of Opening ANSI inch mm DIN(PN) / , / / / / / ,025 1, / / ,080 1,490 1,850 2, / ,350 1,675 1, / ,120 1,680 2,270 2,850 3, / ,470 1,985 2,495 2, / ,080 1,645 2,520 3,385 4,185 4, / ,435 2,200 2,955 3,650 4, / ,335 1,950 2,850 4,060 5,105 5, / ,265 1,850 2,705 3,850 4,840 5, / ,110 1,820 2,720 3,900 5,670 7,100 8, / ,055 1,730 2,585 3,705 5,385 6,745 7, / ,460 2,415 3,520 5,300 7,400 9,280 10, / ,375 2,265 3,320 5,000 6,980 8,750 9, / ,100 1,940 3,200 4,800 7,000 9,900 12,390 14, / ,020 1,800 2,970 4,460 6,500 9,190 11,500 13, / ,700 2,940 4,830 7,300 10,700 14,900 18,500 21, / ,580 2,730 4,485 6,780 9,940 13,840 17,180 19, / ,000 3,500 5,700 8,600 12,700 17,700 22,100 25, / ,350 4,100 6,700 10,000 14,700 20,550 25,600 29, / ,750 4,700 7,800 11,700 17,000 23,700 29,600 33, /16 1,150 3,300 5,700 9,400 14,000 20,900 29,100 36,200 41, /16 1,500 4,200 7,600 12,500 18,800 28,000 38,900 48,600 55, /16 2,000 5,400 9,700 16,000 24,000 35,700 49,500 61,800 70, /16 2,500 6,700 12,000 19,800 29,800 44,300 61,300 76,600 87, /16 3,050 8,200 14,500 23,700 35,800 53,000 73,600 92, ,000 Cv value indicates quantity of water at 60 F(15.6 C)in US gal./min. which flows through the valve at pressure drop of 1 psi(0.0069mpa) 16
17 UNIPOWER Rotary Pneumatic Actuator NC type Double Acting UNIFLOW SS611E2A Operating Pressure : 0.39MPa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NC091 NC201 NC351 NC651(*) A (mm) Dimensions B (mm) C (mm) Weight Kg Output Torque (at 0.39MPa/58psi) Cylinder Volume Nm a (liters) b (liters) Air Consumption (at 0.39MPa/58psi) liters /cycle Operation Speed(**) Seconds (*) : Option (**) : UNIPOWER's own 17
18 UNIPOWER Rotary Pneumatic Actuator NE type Spring Return UNIFLOW SS611E2A Operating Pressure : 0.39MPa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NE091S NE201S NE351S Dimensions A (mm) B (mm) C (mm) Weight Kg Output Torque (at 0.39MPa/58psi) Nm FC FO Cylinder Volume Air Consumption (at 0.39MPa/58psi) a (liters) liters / stroke FC : Air Failure, Valve Close FO : Air Falilure, Valve Open As for function speed, refer to NC type Double acting actuators' as reference. 18
19 UNIPOWER Rotary Pneumatic Actuator NS type Double Acting UNIFLOW SS611E2A Operating Pressure : 0.39Mpa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NS13N NS17N NS20N NS28N A (mm) Dimensions B (mm) C (mm) Weight Kg Output Torque (at 0.39MPa/58psi) Cylinder Volume Nm a (liters) b (liters) Air Consumption (at 0.39MPa/58psi) liters /cycle Operation Speed(*) Seconds (*): UNIPOWER's own 19
20 UNIPOWER Rotary Pneumatic Actuator NS type Spring Return UNIFLOW SS611E2A Operating Pressure : 0.39MPa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NS13NS NS17NS NS20NS NS28NS A(mm) Dimensions B(mm) C(mm) Weight Kg Output Torque (at 0.39MPa/58psi) Nm Cylinder Volume a(liters) b(liters) Air Consumption (at 0.39MPa/58psi) liters /stroke FC : Air Failure, Valve Close (The picture above shows "FC" function.) FO : Air Falilure, Valve Open (The spring compartment will be located on the right side of the picture.) 20
21 UNIPOWER Rotary Pneumatic Actuator SpecItems Types Standard Specifications and Accessories Double Acting (NC) NC / NE Spring Return (NES) Double Acting (NSN) NS UNIFLOW SS611E2A Spring Return (NSNS) Construction Connection Standards Scotch Yoke type pneumatic cylinder rotary actuator ISO 5211/1 ISO 5211/1 (upon request) NAMUR to VDI/VDE 3845 available upon request Application Materials Body/Cover Cylinder Shaft Piston ORings Operating Pressure OnOff FCD400(Ductile iron) FCD400(Ductile iron) S45C(Steel)/hard chrome plated AC4CT6(Aluminum) NBR Air 0.39MPa / 58psi OnOff FCD400(Ductile iron) STKM13(Steel pipe) S45C(Steel)/hard chrome plated A6061T6(Aluminum) NBR Air 0.39MPa / 58psi Piping connections Rc 1/4" for NC091 upto NC651 NE091S upto NE351S Rc 1/4" for NS13N(S), Rc 3/8" for NS17N(S) upto NS20N(S), Rc 1/2" for NS28N(S) Opening range Allowable environmental temperature Rotary OnOff : 0 93 Rotary OnOff : C +80 C / 4 F +176 F 20 C +80 C / 4 F +176 F Protection rating Standard painting (incl.yoke) Accessories (*) Outdoors waterproof(ip55) Magenta Outdoors waterproof(ip55) Magenta Manual operators G type Manual gear, (*) Lever Manual gear Side handle Limit switches Solenoid valves Air filter regulators Speed controllers Quick exhaust valves Silencers Pressure equalizing valve Others(*) (*) : Option 1LS(waterproof), 1LX(explosionproof) VCL(waterproof), VCX(explosionproof) 3way : M00U waterproof explosionproof) 4way : M15G M65G(waterproof, explosionproof) AW3000 AW4000 XR108 AS4000 QEV QEV QEV QEV 20 AN AN500 DH12B Special instructions available for salty environment, extreme cold environment, special airtubing, special joints, special painting, stainless steel bolts/nuts for outside exposed environment, volume tanks, lockup valves, etc. 21
22 Maintenance UNIFLOW SS611E2A Wafer Single Flange Easy Replacement of Seat and Seal Seat replacement can be done very easily and quickly without disassembling the shaft and disc. Flat Face Insert for sizes smaller than 12"(300mm) Bolted Insert for sizes larger than 14"(350mm) Seal Kits Parts Name Soft Double Seat Fire Safe Seat Double Seat Soft Single Seat Metal Seat PTFE seat Inconel Seat Gasket tape (Grafoil:T#1220) Metal seat (316ss) Gasket tape(grafoil:t#1220) Gland packing Nonasbesto Grafoil (P#6528/P#6610 equiv.) PTFE PTFE Nonasbesto Grafoil(P#6528/P#6610 equiv.) Bottom gasket Grafoil (*) (P#6610 equiv.) PTFE PTFE Grafoil (*) (P#6610 equiv.) Body gasket Grafoil / 316SS (T#1804GR) only for Double FlangeType(Gate A face to face) (*)All sizes for classes larger than ANSI 300 : Grafoil/316SS Profiles of the seats here are roughly drawn. 22
23 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 150, PN10/16 (Wafer Type, Single Flange Type) 2"(50mm)24"(600mm) with UNIPOWER (Double Acting Actuator) (*):UNIPOWER is selected at max. differential pressure 1.0MpaG(145psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 5" 125mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm Seat types L d s.doub/f.s NC NC s.doub/f.s NC Wafer (unit: mm) Single Flange NC s.doub/f.s NC091 NC s.doub/f.s NC091 NC s.doub/f.s NC NC s.doub/f.s NC NC s.doub/f.s NC NS13N s.doub/f.s NC NS13N s.doub/f.s. D H1 H H3 E1 F1 F NS13N s.doub/f.s NS17N s.doub/f.s NS17N NS17N s.doub/f.s NS20N NS17N s.doub/f.s NS20N s.doub/f.s NS20N s.doub./f.s.=/fire safe (*):Supply pressure 0.39MPa 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm UNIPOWER (*) Weight(Kg) NS13N
24 Dimensions of OnOff UNIFLOW ANSI Class 150, PN10/16 (Wafer Type) 26"(650mm)48"(1200mm) with UNIPOWER ( Double Acting Actuator) UNIFLOW SS611E2A (*):UNIPOWER is selected at max. differential pressure 1.0MpaG(145psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d D H1 H2 H3 E1 F1 F2 26" 650mm 28" 700mm 30" 750mm 32" 800mm 36" 900mm 40" 1000mm 44" 1100mm 48" 1200mm (unit: mm) Weight(Kg) Wafer NS20N NS28N NS20N NS28N NS20N NS28N NS28N NS28N NS28N UNIPOWER (*) (*):Supply pressure 0.39MPa
25 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 300, PN25/40 (Wafer Type, Single Flange Type) 3"(80mm)24"(600mm) with UNIPOWER (Double Acting Actuator) (*):UNIPOWER is selected at max. differential pressure 2.0MpaG(290psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d 3" 80mm 4" 100mm 5" 125mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm D H1 H2 H3 Wafer (unit: mm) Single Flange 350 /fire safe NC NC /fire safe NC NC /fire safe NC NC /fire safe NC NC /fire safe NC NS13N /fire safe NS13N /fire safe NS13N NS17N /fire safe NS17N /fire safe NS17N NS20N /fire safe NS20N /fire safe NS20N /fire safe NS28N (*):Supply pressure 0.39MPa E1 F1 F2 UNIPOWER (*) Weight(Kg) 25
26 Dimensions of OnOff UNIFLOW ANSI Class 150, PN10/16 (Wafer Type, Single Flange Type) with UNIPOWER ( Spring Return Actuator) FC (Fail Close) UNIFLOW SS611E2A 2"(50mm)24"(600mm) (*):UNIPOWER is selected at max. differential pressure 1.0MpaG(145psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d D H1 H2 H3 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 5" 125mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm Wafer (unit:mm) Single Flange NE091S 22 s.doub/f.s NE201S NE351S 41 s.doub/f.s NE201S NE351S s.doub/f.s NE201S NS13NS s.doub/f.s NE201S NS13NS s.doub/f.s NE351S NS13NS 81 s.doub/f.s NE351S NS13NS s.doub/f.s NS13NS NS17NS s.doub/f.s. s.doub/f.s. 317 s.doub/f.s NS20NS s.doub/f.s NS20NS NS20NS s.doub/f.s NS28NS s.doub/f.s s.doub/f.s s.doub./f.s.=/fire safe NS17NS E E F1 301 F UNIPOWER (*) 95 NS17NS NS28NS 174 (*):Supply pressure 0.39MPa Weight(Kg) NS28NS
27 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 150 (Wafer Type, Single Flange Type) 26"(650mm)48"(1200mm) with UNIPOWER(Spring Return Actuator) FC (Fail Close) (*):UNIPOWER is selected at max. differential pressure 1.0MpaG(145psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size 26" 650mm 28" 700mm 30" 750mm 32" 800mm 36" 900mm 40" 1000mm 44" 1100mm 48" 1200mm Seat types (unit: mm) Weight(Kg) Wafer NS28N NS28N NS28N 823 L d D H1 H2 H E1 E2 F1 F2 850 UNIPOWER (*) (*):Supply pressure 0.39MPa
28 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 300 (Wafer Type) 3"(80mm)24"(600mm) with UNIPOWER (Spring Return Actuator) FC (Fail Close) (*):UNIPOWER is selected at max. differential pressure 2.0MpaG(290psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d D H1 H2 3" 80mm 4" 100mm 5" 125mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm H3 Wafer Single Flange 376 /fire safe NE201S NS13NS /fire safe NE351S NS13NS /fire safe NE351S NS13NS /fire safe NE351S NS13NS /fire safe NS13NS NS17NS /fire safe NS17NS /fire safe NS20NS /fire safe NS20NS NS28NS /fire safe NS28NS /fire safe NS28NS /fire safe NS28NS /fire safe (*):Supply pressure 0.39MPa 28 E1 E2 F1 F2 UNIPOWER (*) (unit: mm) Weight(Kg)
29 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 150, PN10/16(Wafer Type, Single Flange Type) 2"(50mm)24"(600mm) with UNIPOWER (Spring Return Actuator) FO (Fail Open) (*):UNIPOWER is selected at max. differential pressure 1.0MpaG(145psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d D H1 H2 H3 E1 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 5" 125mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm Wafer (unit: mm) s.doub/f.s NE091S NE351S NE091S 23 s.doub/f.s NE201S NE351S 42 s.doub/f.s NE201S NE351S s.doub/f.s NE201S NS13NS NE201S 36 s.doub/f.s NE351S NS13NS 81 s.doub/f.s NE351S NS13NS Single Flange s.doub/f.s NS13NS NS17NS s.doub/f.s. s.doub/f.s s.doub/f.s NS20NS s.doub/f.s NS20NS NS20NS s.doub/f.s NS28NS s.doub/f.s NS28NS s.doub/f.s NS28NS s.doub./f.s.=/fire safe E2 F F UNIPOWER (*) NS17NS 163 (*):Supply pressure 0.39MPa Weight(Kg) 184 NS17NS
30 Dimensions of OnOff UNIFLOW ANSI Class 150, PN10/16 (Wafer Type) 26"(650mm)48"(1200mm) With UNIPOWER(Spring Return Actuator) FO (Fail Open) UNIFLOW SS611E2A (*):UNIPOWER is selected at max. differential pressure 1.0MpaG(145psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d D H1 H2 H3 E1 26" 650mm 28" 700mm 30" 750mm 32" 800mm 36" 900mm 40" 1000mm 44" 1100mm 48" 1200mm (unit: mm) Weight(Kg) Wafer NS28N NS28N NS28N E2 F1 F2 UNIPOWER (*) (*):Supply pressure 0.39MPa
31 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 300 (Wafer Type, Single Flange Type) 3"(80mm)24"(600mm) with UNIPOWER (Spring Return Actuator) FO (Fail Open) (*):UNIPOWER is selected at max. differential pressure 2.0MpaG(290psi)with the recommended flow direction. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d 3" 80mm 4" 100mm 5" 125mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm D H1 H2 H3 Wafer Single Flange 376 /fire safe NE201S NE351S /fire safe NE201S NS13NS /fire safe NE351S NS13NS /fire safe NE351S NS13NS /fire safe NS13NS NS17NS /fire safe NS17NS /fire safe NS20NS /fire safe NS20NS NS28NS /fire safe NS28NS /fire safe NS28NS /fire safe NS28NS /fire safe (*):Supply pressure 0.39MPa 31 E1 E2 F1 F2 UNIPOWER (*) (unit: mm) Weight(Kg)
32 Dimensions of OnOff UNIFLOW ANSI Class 150, PN10/16 (Wafer Type, Single Flange Type) with Manual Gear UNIFLOW SS611E2A 2"(50mm)24"(600mm) (*):Manual gear is selected at 1.0MPaG with the Insertside higher pressure. Metal seated UNIFLOW is selected in the temperature range of " 400mm 18" 450mm 20" 500mm 24" 600mm (unit: mm) D H1 H2 H3 K M W Gear(*) Weight(Kg) Wafer Single Flange s.doub/f.s. s.doub/f.s. s.doub/f.s. s.doub/f.s. s.doub/f.s. s.doub/f.s RGM1 RGM1 RGM1 RGM1 RGM1 RGM1 RGM s.doub/f.s. s.doub/f.s RGM2 RGM s.doub/f.s RGM Size Seat types L d 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 5" 125mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm RGM s.doub/f.s RGM s.doub/f.s RGM RGM s.doub/f.s RGM RGM s.doub/f.s RGM s.doub/f.s RGM s.doub./f.s.=/fire safe 32
33 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 150, PN10/16 (Wafer Type, Single Flange Type) 2"(50mm)8"(200mm) with Lock Lever Handle (*):Lock lever is selected at 1.0MPaG with the Insertside higher pressure. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d D 2" s.doub/f.s. 50mm 2.5" s.doub/f.s. 65mm 3" s.doub/f.s. 80mm 4" s.doub/f.s. 100mm 5" s.doub/f.s. 125mm 6" s.doub/f.s. 150mm 8" s.doub/f.s. 200mm L 280L 280L 280L 350L 350L 500L s.doub./f.s.=/fire safe h H1 H2 H3 H4 W (*) Weight(Kg) Wafer (unit:mm) Single Flange
34 Dimensions of OnOff UNIFLOW UNIFLOW SS611E2A ANSI Class 300, PN25/40(Wafer Type, Single Flange Type) 3"(80mm)6"(150mm) with Lock Lever Handle (*):Lock lever is selected at 2.0MPaG with the Insertside higher pressure. Metal seated UNIFLOW is selected in the temperature range of Size Seat types L d D h H1 H2 H3 H4 W (*) 3" 80mm 4" 100mm 5" 125mm 6" 150mm fire safe fire safe fire safe fire safe Wafer L L 280L L 21 (unit:mm) Weight(Kg) 13 Single Flange
35 How to order UNIFLOW(Product Code No.) UNIFLOW SS611E2A Code No.: Example: 12 6W A F2 S 6 (*) The above example is for Valve size 12"(DN300), Wafer type, ANSI Class 150, CF8Mbody, CF8Mdisc, 316ssshaft with fire safe seat, standard bonnet and with UNIPOWER(NStype pneumatic spring return actuator). Size Body Type inch mm (Connection) Disc material Actuation W Wafer type 4 CF8 0 Bare shaft 2,5 2,5 65 6L Single Flange type 6 CF8M 1 Ratchet lever (option) Double Flange type 4L CF3 2 Lock lever 6F (Gate F.toF.) 6L CF3M 3 Manual gear OneSide K Monel 4 UNIPOWER(NCspring ret.) 6K Flange type 5 UNIPOWER(NCdouble act.) UNIPOWER(NSspring ret.) UNIPOWER(NSdouble act.) Rating Shaft material UNIMOTOR(electric) P00 Undrilled 4 304SS 9 Hydraulic P10 PN SS 4P UNIPOWER(NC2 stage spring) P16 PN16 X 174PH P25 PN25 4L 304L P40 PN40 6L 316L P64 PN SS P100 PN100 K Monel A15 ANSI 150 A30 ANSI 300 A60 ANSI 600 Other materials available upon request When UNIPOWER with manual gear, add "3" after the code number. Body material D Ductile P C WCB D2 4 CF8 F2 6 CF8M N 4L CF3 L 6L CF3M LK K Monel Other materials available upon request Seat/Seal material Soft Single Seat(PTFE)/ Seal: PTFE Soft Double Seat(PTFE+316SS)/Seal: PTFE Soft Double Seat(PTFE+316SS)/Seal: Grafoil Metal Single Seat(Inconel)/Seal: Grafoil Cryogenic Seat(316SS+PTFE Cryogenic SeatZero leak(316ss+special soft seat) S Standard type Other materials E Extension bonnet available J Jacket type upon request Bonnet type (*) When special features or accessories are required, they shall be described after the code number "9" in details. 35
36 How to order UNIFLOW(Product Code No.) UNIFLOW SS611E2A Code No.: Example: 20 5U A F2 S 7 (*) The above example is for Valve size 20"(DN500), Wafer type, ANSI Class 150, CF8Mbody, CF8Mdisc, 316ssshaft with fire safe seat, standard bonnet and with UNIPOWER(NStype pneumatic double acting actuator). Size inch mm Body Type (Connection) Disc material Actuation U Wafer type C WCB(Option) 0 Bare shaft L Single Flange type 4 CF8 3 Manual gear CF8M 4 UNIPOWER(NCspring ret.) L CF3 5 UNIPOWER(NCdouble act.) L CF3M 6 UNIPOWER(NSspring ret.) K Monel 7 UNIPOWER(NSdouble act.) UNIMOTOR(electric) Hydraulic Rating Shaft material P00 Undrilled 4 304SS P10 PN SS P16 PN16 X 174PH P25 PN25 4L 304L P40 PN40 6L 316L P64 PN SS P100 PN100 K Monel A15 ANSI 150 A30 ANSI 300 A60 ANSI 600 Other materials available upon request When UNIPOWER with manual gear, add "3" after the code number. Body material D Ductile P C WCB D2 4 CF8 F2 6 CF8M N 4L CF3 L 6L CF3M LK K Monel Other materials available upon request Seat/Seal material Soft Single Seat(PTFE)/ Seal: PTFE Soft Double Seat(PTFE+316SS)/Seal: PTFE Fire Safe Seat(PTFE+316SS)/Seal: Grafoil Metal Single Seat(Inconel)/Seal: Grafoil Cryogenic Seat(316SS+PTFE Cryogenic SeatZero leak(316ss+special soft seat) S Standard type (*) E Extension bonnet J Jacket type Other materials available upon request Bonnet type When special features or accessories are required, they shall be described after the code number "9" in details. 36
37 Instructions for piping UNIFLOW SS611E2A Connections Wafer Single Flange Cautions before Installation (1) Welding spatter and other foreign matters in the piping line may cause damage on the seat and resulting higher torque: they must be thoroughly flushed. (2) On the UNIFLOW body there is an arrow mark( ) to indicate the recommended flow direction. The valve should be installed as follows: Higher pressure side when valve is closed Piping Orientation for Single Flange Type Lower pressure side when valve is closed (3) Wafer Type and Single Flange Type UNIFLOW obtain correct sealing by tightening the flange bolts for piping of the Insertring side. If the piping flanges are not placed the fluid can not be shut off. Correct Wrong 37
38 Instructions for piping UNIFLOW SS611E2A Recommended Flow Direction UNIFLOW seals the fluids bidirectionally, we however, recommend you to use in our recommended flow direction as illustrated hereunder, you will then have the following advantages: Much less seat wear; meaning Longer Sealing Life. The fluid will not contact the sealing surface of the seat, also Longer Seat Life. Lighter startup torque; meaning Lower in Cost by selecting more economical(smaller) Actuators As it seals the fluids at the seat, the fluid pressure will not affect the gland sealing part directly; meaning Longer Sealing Life of the Gland packings. Cautions for application of reverse flow pressure: In case of flow loading by reverse pressure, the valve opening torque becomes higher; the selection of proper actuator will then be different. Consult us. Cautions for applications other than OnOff UNIFLOW is designed to use for OnOff application. In case the valve is used with slightly opening degree all the time, you are requested to consult us for further information. 38
39 ONOFF with Worm Gear with Lock Lever with Ratchet Lever (Option) Warranty 1. Warranty NBS undertakes to replace or repair at its cost, exworks an NBS certified workshop: a. Any product which is found to have defective workmanship through design or manufacture. b. Any product which fails in service provided that the NBS installation, operation and maintenance specification and procedures manual has been followed. 2. Term of warranty The warranty is valid for a period of 12 months after commissioning or 18 months from delivery exworks the NBS factory, whichever occurs sooner. 3. The following products shall be excluded from the warranty. Any valve delivered as a bare shaft valve without an NBS actuator. a. Failures attributed to actuators or related accessories not installed by NBS. b. Failures as a result of a process, other machine or piece of equipment.
40 Contents subject to change without notice. SS 611E2A
41 UNICON SS811E Patent registered
42
43 Contents page UNICON is not a Butterfly valve 3 UNICON Construction and Production Range Soft Double Seat 5/6 Fire Safe Seat 7/8 Metal Seat 9/10 UNICON Performance Soft Double Seat / Fire Safe Metal Seat Flow Controllability (Curve) Basic Formula Flow Characteristics (Cv Value) Kc Cavitation Coefficient FL Recovery Coefficient Pneumatic Rotary Actuator UNIPOWER Construction and Torque 17/20 UNIPOWER Specifications and Accessories 21 UNIPOWER Selection Table (for Double Seat) 22 UNIPOWER Selection Table (for Gas Control) 23 UNIPOWER Selection Table (for Liquid Control) 24 How to order UNICON (Product Code No.) 25 Instructions for piping 26/27 Maintenance 28
44 3
45 UNICON SS811E Construction 4
46 UNICON Construction UNICON SS811E Soft Double Seat ANSI Class 150, ISO PN10/16 PN25 (smaller than 300mm) ANSI Class 300, ISO PN25/40 Shaft Bearing 5
47 UNICON Standard Production Range UNICON SS811E Soft Double Seat Wafer Double Flange / Single Flange Connection Rating ANSI ISO Class 150 Class 300 PN10/16 PN25 300mm) PN25/40 Class 150 Class 300 PN10/16 PN25/40 Nominal Size mm (inch) 50(2") 1200(48") 80(3") 600(24") 80(3") 600(24") Applied Standards Designed to Face to Face Flange Connection Bonnet ISO 5752/Short 350mm(14"):Medium MSS SP68 ASME / ANSI B16.34 ASME / ANSI B16.5, DIN 2501/Sheet 1 ASME B16.47 Series A: Standard( Series B: available upon request) ISO 5211/1 ISO 5752/Short 350mm(14"):Medium MSS SP68 Body Disc Disc surface Ductile iron, WCB, 304SS 316SS WCB 316SS WCB 316SS WCB 316SS 316SS(Option:304SS) Sealing Surface Hard Chrome Plated Materials Shaft Seat 316SS(Option:304SS) 174PH 316SS PTFE/316SS 316SS(Option:304SS) 174PH 316SS Gland packing Bottom gasket Shaft bearing PTFE (Double Gland Packing as an Option : Oring/PTFE) (*) PTFE RPTFE/316SS (*)Double Gland Packing: Certified to TALUFT(Technical Guideline for Clean Air Preservation) Actuators Automated Pneumatic Rotary Actuators(Double Acting / Spring Return) 6
48 UNICON Construction UNICON SS811E Fire Safe Seat ANSI Class 150, ISO PN10/16 PN25 (smaller than 300mm) ANSI Class 300, ISO PN25/40 After Fire Shaft Bearing 7
49 UNICON Standard Production Range UNICON SS811E Everything except for the following specifications the "Soft Double Seat"(See Page 6.) remains unchanged for the Fire Safe Seat. Fire Safe Seat Materials Body Gland packing Bottom gasket Except for Ductile iron Nonasbesto / Grafoil Double Gland Packing as an option : Oring/Nonasbesto/Grafoil (*) Grafoil : Class 150 smaller than 600mm(24") Grafoil/316SS : Class 150 larger than 650mm(26"), Class 300 all sizes (*)Double Gland Packing: Certified to TALUFT(Technical Guideline for Clean Air Preservation) Fire Safe Approvals Applied Standards: American Petroleum Institute(API) Fire Safe for softseated quarterturn valves/api Standard 607, Third Edition, Nov British Standard(BS): Testing of valves/part 2 Specifications for fire type testing requirements BS 6755: Part 2, 1987 Third Party Inspection Authority: Lloyd's Register of Shipping Approved Range: Tested Rating Class 150 3"(80mm) Approved Range Class 150, 300, PN16, 25, 40 3"(80mm), 4"(100mm), 5"(125mm), 6"(150mm) Sizes 8"(200mm) 16"(400mm) 8"(200mm), 10"(250mm), 12"(300mm), 14"(350mm), 16"(400mm) larger than 16"(400mm) 8
50 UNICON Construction UNICON SS811E Metal Seat ANSI Class 150, ISO PN10/16 PN25 (smaller than 300mm) ANSI Class 300, ISO PN25/40 9
51 UNICON Standard Production Range UNICON SS811E Metal Seat Wafer Double Flange / Lugged Connection Rating ANSI ISO Class 150 Class 300 Class 150 PN10/16 PN25 300mm) Class 300 PN25/40 PN10/16 PN25/40 Nominal Size Applied Standards mm (inch) Designed to Face to Face Flange Connection Bonnet 50(2") 1200(48") 80(3") 600(24") 80(3") 600(24") ISO 5752/Short 350mm(14"):Medium MSS SP68 ASME / ANSI B16.34 ISO 5211/1 ISO 5752/Short 350mm(14"):Medium ASME / ANSI B16.5, DIN 2501/Sheet 1 ASME B16.47 Series A: Standard(Series B: available upon request) MSS SP68 Body Ductile iron WCB 304SS 316SS WCB 316SS WCB 316SS WCB 316SS Disc 316SS(Option: 304SS) Disc surface Sealing surface Hard Chrome Plated Materials Shaft 316SS(Option: 304SS) 174PH 316SS 316SS(Option: 304SS) 174PH 174PH for all applications exceeding SS Seat Inconel Gland packing Bottom gasket Shaft bearing Nonasbesto / Grafoil Double Gland Packing as an option: Oring/Nonasbesto/Grafoil(*) Grafoil : Class 150 smaller than 600mm(24") Grafoil/316SS : Class 150 larger than 650mm(26"), Class 300 all sizes 316SS (*)Double Gland Packing: Certified to TALUFT(Technical Guideline for Clean Air Preservation) Actuators Automated Pneumatic Rotary Actuators(Double Acting / Spring Return) 10
52 UNICON Performance UNICON SS811E Soft Double Seat / Fire Safe Seat Soft Double Seat Fire Safe Seat After Fire Sealing Performance Tight Shutoff Pressure/Temperature Rating ANSI Class 150(PN10/16) For details, consult us under Fax: , Tel: , address: nbstokyo@oak.ocn.ne.jp 11
53 UNICON Performance UNICON SS811E Metal Seat Pressure/Temperature Rating ANSI Class 150(PN10/16) ANSI Class 300(PN25/40) For details, consult us under Fax: , Tel: , address: nbstokyo@oak.ocn.ne.jp 12
54 UNICON SS811E UNICON Performance 13
55 UNICON Performance UNICON SS811E Cv Values vs. Travel Position ANSI Class 150/300, ISO/DIN PN10/16/25/40 Size ISO/ Angle of Opening ANSI inch mm DIN(PN) / , / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Cv value indicates quantity of water at 60 F(15.6 C)in US gal./min. which flows through the valve at pressure drop of 1 psi(0.0069mpa) 14
56 UNICON Performance UNICON SS811E Kc Cavitation Coefficient(primary) 15
57 UNICON Performance UNICON SS811E FL Recovery Coefficient 16
58 UNIPOWER Rotary Pneumatic Actuator NC type Double Acting UNICON SS811E Operating Pressure : 0.39MPa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NC091 NC201 NC351 NC651(*) A (mm) Dimensions B (mm) C (mm) Weight Kg Output Torque (at 0.39MPa/58psi) Cylinder Volume Nm a (liters) b (liters) Air Consumption (at 0.39MPa/58psi) liters /cycle Operation Speed(**) Seconds (*) : Option (**) : UNIPOWER's own 17
59 UNIPOWER Rotary Pneumatic Actuator NE type Spring Return UNICON SS811E Operating Pressure : 0.39MPa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NE091S NE201S NE351S Dimensions A (mm) B (mm) C (mm) Weight Kg Output Torque (at 0.39MPa/58psi) Nm FC FO Cylinder Volume Air Consumption (at 0.39MPa/58psi) a (liters) liters / stroke FC : Air Failure, Valve Close FO : Air Failure, Valve Open As for function speed, refer to NC type Double acting actuators' as reference. 18
60 UNIPOWER Rotary Pneumatic Actuator NS type Double Acting UNICON SS811E Operating Pressure : 0.39Mpa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NS13N NS17N NS20N NS28N A (mm) Dimensions B (mm) C (mm) Weight Kg Output Torque (at 0.39MPa/58psi) Cylinder Volume Nm a (liters) b (liters) Air Consumption (at 0.39MPa/58psi) liters /cycle Operation Speed(*) Seconds (*): UNIPOWER's own 19
61 UNIPOWER Rotary Pneumatic Actuator NS type Spring Return UNICON SS811E Operating Pressure : 0.39MPa / 58psi Operating Temperature : 20 C +80 C / 4 F +176 F Actuator Type Number NS13NS NS17NS NS20NS NS28NS A(mm) Dimensions B(mm) C(mm) Weight Kg Output Torque (at 0.39MPa/58psi) Nm Cylinder Volume a(liters) b(liters) Air Consumption (at 0.39MPa/58psi) liters /stroke FC : Air Failure, Valve Close (The picture above shows "FC" function.) FO : Air Failure, Valve Open (The spring compartment will be located on the right side of the picture.) 20
62 UNIPOWER Rotary Pneumatic Actuator SpecItems Types Standard Specifications and Accessories Double Acting (NC) NC / NE Spring Return (NES) Double Acting (NSN) NS Spring Return (NSNS) UNICON SS811E Construction Connection Standards Scotch Yoke type pneumatic cylinder rotary actuator ISO 5211/1 ISO 5211/1 (upon request) NAMUR to VDI/VDE 3845 available upon request Application Materials Body/Cover Cylinder Shaft Piston ORings Operating Pressure OnOff FCD400(Ductile iron) FCD400(Ductile iron) S45C(Steel)/hard chrome plated AC4CT6(Aluminum) NBR Air 0.39MPa / 58psi OnOff FCD400(Ductile iron) STKM13(Steel pipe) S45C(Steel)/hard chrome plated A6061T6(Aluminum) NBR Air 0.39MPa / 58psi Piping connections Rc 1/4" for NC091 upto NC651 NE091S upto NE351S Rc 1/4" for NS13N(S), Rc 3/8" for NS17N(S) upto NS20N(S), Rc 1/2" for NS28N(S) Opening range Allowable environmental temperature Rotary OnOff : 0 93 Rotary OnOff : C +80 C / 4 F +176 F 20 C +80 C / 4 F +176 F Protection rating Standard painting (incl.yoke) Accessories (*) Outdoors waterproof(ip55) Magenta Outdoors waterproof(ip55) Magenta Manual operators G type Manual gear, (*) Lever Manual gear Side handle Limit switches Solenoid valves Air filter regulators Speed controllers Quick exhaust valves Silencers Pressure equalizing valve Others(*) (*) : Option 1LS(waterproof), 1LX(explosionproof) VCL(waterproof), VCX(explosionproof) 3way : M00U waterproof explosionproof) 4way : M15G M65G(waterproof, explosionproof) AW3000 AW4000 XR108 AS4000 QEV QEV QEV QEV 20 AN AN500 DH12B Special instructions available for salty environment, extreme cold environment, special airtubing, special joints, special painting, stainless steel bolts/nuts for outside exposed environment, volume tanks, lockup valves, etc. 21
63 UNICON SS811E 22
64
65
66 How to order UNICON(Product Code No.) UNICON SS811E Code No.: Example: 12 8W A F2 S 6 (*) The above example is for Valve size 12"(DN300), Wafer type, ANSI Class 150, CF8Mbody, CF8Mdisc, 316ssshaft with fire safe seat, standard bonnet and with UNIPOWER(NStype pneumatic spring return actuator). Size Body Type inch mm (Connection) Disc material Actuation W Wafer type 4 CF8 0 Bare shaft 2,5 2,5 65 8L Single Flange type 6 CF8M 1 Ratchet lever (option) Double Flange type 4L CF3 2 Lock lever 8F (Gate F.toF.) 6L CF3M 3 Manual gear K Monel 4 UNIPOWER(NCspring ret.) UNIPOWER(NCdouble act.) UNIPOWER(NSspring ret.) UNIPOWER(NSdouble act.) Rating Shaft material UNIMOTOR(electric) P00 Undrilled 4 304SS 9 Hydraulic P10 PN SS 4P UNIPOWER(NC2 stage spring) P16 PN16 X 174PH P25 PN25 4L 304L P40 PN40 6L 316L P64 PN SS P100 PN100 K Monel A15 ANSI A30 ANSI A60 ANSI Body material D Ductile P C WCB D2 4 CF8 F2 6 CF8M N 5 A105 L 4L CF3 LK 6L K CF3M Monel Other materials available upon request S Standard type Other materials E Extension bonnet available upon request J Jacket type Other materials available upon request Seat/Seal material Soft Single Seat(PTFE)/ Seal: PTFE Bonnet type When UNIPOWER with manual gear, add "3" after the code number. Soft Double Seat(PTFE+316SS)/Seal: PTFE Soft Double Seat(PTFE+316SS)/Seal: Grafoil Metal Single Seat(Inconel)/Seal: Grafoil Cryogenic Seat(316SS+PTFE Cryogenic SeatZero leak(316ss+special soft seat) (*) When special features or accessories are required, they shall be described after the code number "9" in details. 25
67 Instructions for piping UNICON SS811E Connections Wafer type Single Flange type Double Flange type Cautions before Installation (1) Welding spatter and other foreign matters in the piping line may cause damage on the seat and resulting higher torque: they must be thoroughly flushed. (2) On the UNICON body there is an arrow mark( ) to indicate the recommended flow direction. The valve should be installed as follows: Higher pressure side when valve is closed Lower pressure side when valve is closed (3) Wafer Type and Single Flange Type UNICON obtain correct sealing by tightening the flange bolts for piping of the Insertring side. If the piping flanges are not placed the fluid can not be shut off. Piping Orientation for Single Flange Type 26
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More informationPneumatic Butterfly Valve Pfeiffer Type BR 14b/AT
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Application Tight closing, double eccentric butterfly valve for process engineering and plants with industrial requirements Nominal size DN 80 to DN 400
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationPneumatic Butterfly Valve Type TOSV
Pneumatic Butterfly Valve Type TOSV Application Triple eccentric, tight closing high-pressure butterfly valve for process engineering and plants with industrial requirements 3 to 84 Nominal pressure ANSI
More informationINTERVALVE (ENGINEERING DATA SHEET)
GENERAL FEATURES PRODUCT SPECIFICATION MATL. OF CONSTRUCTION OPERATION Title VALVE TYPE VALVE MODEL DESCRIPTION DESIGN, MFG. STD. INTERVALVE (ENGINEERING DATA SHEET) Product Specification for IVEX - F
More informationVETEC Maxifluss Rotary Plug Valve Type 62.7
VETEC Maxifluss Rotary Plug Valve Type 62.7 Double eccentric control valve for process engineering and industrial applications Valve size DN 25 to 2 NPS 1 to 8 Nominal Pressure PN 1 to 4 Class 15 and 3
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationWafer, Lug and Double Flanged Type
Document : PG0 :1 Product Group 0 Wafer, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 : PG0 Product Group 0 Description Product Group 0 Butterfly Valves Triple eccentric metal seated
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationBFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
More informationBR 14p - PSA. High-Performance Control and Shut-off Butterfly Valve. Application:
High-Performance Control and Shut-off Butterfly Valve BR 14p - PSA Application: Pressure swing adsorption (PSA) is a method used to separate a gas from a gas mixture as well as to dry or clean gases. The
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationSeries 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationbutterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
More informationSECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
More informationNAF-Setball ball sector valves DN , PN 10-40, ANSI Class
NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or
More informationSECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationMETAL SEATED NELES ZEROLEAK NELDISC BUTTERFLY VALVES, SERIES L1 & L2
METAL SEATED NELES ZEROLEAK NELDISC BUTTERFLY ALES, SERIES L & L Neldisc series L is a wafer type and series L a lug type metal seated high performance butterfly valve. With close to equal percentage characteristics
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationTriple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
More informationBR 14b / BR 14c Application:
High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi ug, ug and Flanged Type API 607 Fire Safe Page 1 Year : Description Specification : GVC double eccentric High Performance butterfly valves suitable for bi-directional flow and bubble
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
More informationBUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31
BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationBR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
More informationButterfly Control Valve
Butterfly Control Valve Control Valves Compact, field reversible actuator Splined shaft with single pivot point for actuator-disc connection Jam-lever Toggle soft seal Non-selective disc and shaft for
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
More informationNELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
More informationThe series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating ANSI 150 General : The series 10 butterfly valves has been developed for a large number of applications
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationButterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More informationSeries 26d Ball Valve
Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN
More informationACE VALVE COMPANY LIMITED
ACE VALVE COMPANY LIMITED Http://www.acevalve.co.kr 2013.04. ACE VALVE CATALOG 278-4 Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +82--310-0 FAX +82--329-06~8 E-mail acevalve@acevalve.co.kr Homepage
More informationMark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage
Mark 75 Series Wafer Style Control Valves The Mark 75 wafer style control valve was developed by Jordan Valve as the next generation of control valves. Featuring all the benefits of the time-tested Sliding
More informationThe series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout
More informationLined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
More informationKOSO HAMMEL DAHL VeCTor Trim
KOSO HAMMEL DAHL VeCTor Trim 510D/530D SERIES VELOCITY CONTROL TRIM FOR KOSO HAMMEL DAHL VALVES Manufactured by KOSO AMERICA, Inc. Series 510D/530D The Series 510D and 530D provide VeCTor velocity control
More informationKnife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
More informationSERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES
SERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES Series 835 process-rated ANSI Class 150 high-performance Wafer-Sphere butterfly valves are an excellent cost-effective
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationHigh End Technology. Tight Shutoff. Reliability. Expertise you can trust. General Products
High End Technology Tight Shutoff Reliability Expertise you can trust General Products 210 Who are we? 248 MASCOT is a culmination of over one hundred years experience in the process control valve industry
More informationDOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
More informationSeries 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a
Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a Application Control butterfly valve for use in process engineering and industrial applications to meet high demands Suitable for liquids,
More informationBUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
More informationProduct Range. Products for all industrial applications
Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric
More informationMicro Pneumatics Pvt. Ltd.
Micro Pneumatics Pvt. Ltd. A member of Group Reliability Efficiency Quality Company Profile Micro Pneumatics Private Limited founded in 1986 with clear vision of excellent quality, reliability and customer
More informationMaxifluss Rotary Plug Valve - VETEC Type 82.7
Valve Size NPS 1 to 12 ANSI Pressure Class CL 150 and 300 Temperature Range of Medium -320 F to +1022 F (-196 C to +550 C) Valve Body Material Cast carbon steel Low temperature carbon steel Cast stainless
More informationHD150/HD300 Heavy Duty Knife Gate Valve
Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy
More informationTriple Offset Valves
Triple Offset Valves FLOWSEAL MS Value Statement For the harsh conditions of critical process applications, steam isolation, high cycle frequency, and temperature extremes, the Flowseal MS triple-offset
More informationFlowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB0400-00 1 TABLE OF CONTENTS PAGE Theory of Operation.. 3 General Ordering Information 4 Torque values ASME Cl. 150. 5 Torque values
More informationSeries 9210 High Performance Butterfly Valves for ANSI
Series 9210 High Performance Butterfly Valves for ANSI 150-300 70-16-13-05 EN REV. 3 11/15 Page 1 of 8 Specification Series 9210 High Performance Butterfly Valves for ANSI 150-300 DIN/BS 4504 PN10-PN50
More informationInstallation, Operation and Maintenance Manual for the HE Series
Installation, Operation and Maintenance Manual for the HE Series High Performance Butterfly Valve "Double Offset" CONTENT IOM-HP-100614-1 1. INTRODUCTION 1.1 GENERAL NOTE 1.2 STRUCTURE & TYPE 1.3 OPERATION
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationWAFER BUTTERFLY VALVES
WAFER BUTTERFLY VALVES Actuator flange accomodate all type of operators; handle, gear, electric and pneumatic actuator Strong precision key gives positive attachment for manual lever or actuator. Shaft
More informationINTERNATIONAL LTD. COMPANY
Butterfly Valves for Oil&Gas and Petrochemical industry by Alex Khasin (MS (M.Sc MS M.Sc) Raphael Valves Industries Valve types Gate valves Approx. 13 % of the total valve market is covered by Gate valves
More informationR o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationBUTTERFLY VALVES HIGH PERFORMANCE
VALVE MANUFACTURER FOR INDUSTRIAL AND WATER APPLICATIONS BUTTERFLY VALVES HIGH PERFORMANCE Pressure : PN10 ~ PN40 / Class 150 ~ 300 Size : Basic Type : 2" ~ 48" (50mm ~ 1200mm) Fire Safety Type : 2" ~
More informationProduct Manual. S&S V-100 Ball Valves 2 though 8 Inch Designs. Introduction: Installation:
Product Manual S&S V-100 Ball Valves 2 though 8 Inch Designs. Introduction: These instructions apply specifically to the 2 through 8 inch S&S V-100 Ball Valve Bodies. This manual provides maintenance,
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
More informationAWWA C517 ECCENTRIC PLUG VALVES
COMPANY CERTIFICATE AWWA C517 ECCENTRIC PLUG VALVES TIANJIN FSK FLOW CONTROL EQUIPMENT CO., LTD VERSION: 2013-05-EPV CONTENTS ABOUT FSK 1 Our Certifications.....2 Rectangular Port Eccentric Plug Valves.3
More informationFisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
More informationeccentric disc control valve
eccentric disc control valve INTRODUCTION The BXL control valve is a high performance eccentric disc rotary valve, developed for fluid control on industrial processes, that combine usually high BODY SUB-ASSEMBLY
More informationKNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
More informationData Sheet Rotary Plug Valve Type 62.7
Data Sheet Rotary Plug Valve Type 62.7 Double eccentric control valve for process engineering and industrial applications Valve size Nominal Pressure Temperature DN 25 to 200 PN 10 to 40-60 C to +220 C
More informationHP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationSERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationAir Operated Valve Control Valve
Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationGWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationFisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
More informationBULLETIN FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in the chemical,
More informationO IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES
O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves
More informationInstallation, Operation, and Maintenance Manual
Industrial Process Installation, Operation, and Maintenance Manual Series PBV Plastic Lined Ball Valve Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health
More information16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
More informationBR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
More informationButterfly Valves CONCENTRIC BUTTERFLY VALVES 3-OFF SET TYPE BUTTERFLY VALVES AGECT-BFV
AGECT-BFV-2017 www.controlvalve.co.kr CONCENTRIC BUTTERFLY S OFF SET TYPE BUTTERFLY S 3-OFF SET TYPE BUTTERFLY S Butterfly Valves AGE hopes to lead 21C s valve mechanism based on outstanding engineering.
More informationNELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12
NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12 Metso's Neles Neldisc series L12 a wafe type, metal seated high performance triple eccentric disc valve. With close to
More informationR o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
More informationFabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
More informationSERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
More information