Industrivej 3-9 DK-9460 Brovst Denmark Tlf.: Fax: Manual SCANTOOL TSX 1060 GUILLOTINE SHEAR
|
|
- Lorena Nash
- 6 years ago
- Views:
Transcription
1 Industrivej 3-9 DK-9460 Brovst Denmark Tlf.: Fax: Manual SCANTOOL TSX 1060 GUILLOTINE SHEAR
2 EC Declaration of Conformity SCANTOOL A/S Industrivej Brovst Denmark Tel: Fax.: hereby declares that SCANTOOL TSX 1060 GUILLOTINE SHEAR is manufactured in accordance with the provisions of the COUNCIL DIRECTIVE of 17. May 2006 (2006/42/EC) The Machinery Directive (order no. 561 of 25 June 1994 with subsequent amendments) 2006/42/EC: 2004/108/EC: 2006/95/EC: Directive on machinery-safety Directive on Electromagnetic Compatibility Low Voltage Equipment Safety directive Also in accordance with: The council directive of 19 February 1973 (73/23/EEC) The Low Voltage Directive with later amendments (order no. 797 of 30 August 1994) The council directive of 3 May 1989 (89/336/EEC) The EMC Directive with later amendments (order no. 796 of 5 December 1991 with subsequent amendments) 2
3 TABLE OF CONTENTS 1 PRODUCT DESCRIPTION TECHNICAL CHARACTERISTICS 4 2. CARRIAGE AND LAYOUT CONDITIONS CARRIAGE CONDITIONS LAYOUT CONDITIONS 4 3. PUTTING INTO SERVICE MACHINES RUNNING PLACE THE MACHINE CALIBRATION ACCORDING TO ENVIRONEMNTAL CONDITIONS INSTALLATION OF THE MACHINE 5 4. WORKING CONDITIONS STARTING THE MACHINE THE FUNCTIONAL USE OF THE MACHINE SAFETY MEASURES TO BE TAKEN DURING THE RUNNIONG OF THE MACHENRY 7 5. PERSONEL PROTECTIVE EQUIPMENT REQUIREMENTS DURING USE REQUIREMENTS DURING MAINTENANCE 9 6. TRAINING OF OPERATORS 9 7. WARNINGS 9 8. MAINTENANCE INSTRUCTIONS 10 3
4 1 PRODUCT DESCRIPTION 1.1 Technical Characteristics Cutting Capability : 1,5mm Cutting Length : 1050mm Platform Width : 600mm Back Gauge Distance : 550mm Machinery Width : 1050mm Machinery Length : 1750mm Machinery Height : 1120mm Machinery Weight : 425Kg 2 CARRIAGE AND LAYOUT CONDITIONS Lift the machine with a crane by using a chain or steel rope. The equipment for the lifting must be adequate for the machinery weight. Before carriage fix the moveable parts. Fix the cutting arm and press. The carriage must be done by professional persons. Don t stay under the machine during the carriage. It s adequate to carry the machine in water resistant foil to protect it from the weather conditions. Make sure that the machinery is perfectly located after loading on the truck. If necessary, support the parts which aren t perfectly located. Fix the machine on the truck so it can t be move. ATTENTION!!! By taking delivery control if there is any damage on the machine. If there is any damage, note it on the delivery slip of the transporter and inform the carting agent. WARNING The user has to read the operating manual carefully. The user has to act according to the instructions. Otherwise the manufacturer isn t responsible for any accidents or damages. 2.2 Layout Conditions For an accurate, efficient and long working of the machine, it has to be placed on an even base. The accuracy has to be provided with the water gauge. This accuracy has to be controlled in specific intervals. The first control has to be done after 24 hours. After the first control, the control has to be done monthly and yearly. For doesn t falling over, the machine has to be installed on the ground. The falling over of the machine can be responsible for serious damages. 4
5 3 PUTTING INTO SERVICE 3.1 Machines Running Place The needed place of the machine is given in Annex-2. During installation, pay attention to local requirements and environmental factors of the machine. The place where the machine is going to be located has to be safe and hard. For safety working before using the machine has to be controlled if it is exactly located or not. There has to be enough and safety place for making period maintenance. 3.2 The Machine Calibration According to Environmental Conditions Pay attention to environmental conditions. Don t let the machine in moistly areas. There has to be 500mm distance between the movable parts of the machine and the fixed parts or the stored materials. 3.3 Installation of the Machine SCANTOOL TSX 1060 GUILLOTINE SHEAR is delivered, ready for use. You can calibrate the cutting arm stem with a 4 Allen wrench. 4 WORKING CONDITIONS 4.1 Starting the Machine You can use the machine after fixing it on hard ground. During cutting, squeeze the working item with the press arm to block the moves. Move the gauge hand wheel to right and left to calibrate the gauge distance. For preventing the move of the gauge, lock up the clamping arm. Movable working items can cause accidents. You can calibrate the weight for better cutting operation and the metal sheet plate thickness which will be cut. 5
6 6
7 4.2 The functional use of the machine SCANTOOL TSX 1060 GUILLOTINE SHEAR can be used for metal sheet plates till 1,5mm (st 37) 4.3 Safety measures, which has to be taken during running of the machinery. Follow them to achieve best results and full benefit from your new machine The very good craftsman respects the tools with which he works. He knows they represent years of constantly improved design. He also knows that they are dangerous if misused. This is the theme of a new safe-use program for stationary power tools. The safety rules are based on approved practices in industrial and home shops. 2. Keep guard in place and in working order. 3. Ground all tools. If tool is equipped with three-prong plug, it should be plugged into a three-hole electrical receptacle. If an adapter is used to accommodate a two-prong receptacle, the adapter wire must be attached to a known ground. Never remove the third prong. 1. Know your power tool. Read the owner s manual carefully. Learn its applications and limitations, as well as the specific potential hazards peculiar to this tool. 4. Remove adjusting keys and wrenches. Form habit of checking to see that keys and adjusting wrenches is removed before turning it on. 5. Keep work area clean. Cluttered areas and benches invite accidents. 7. Keep children away. All visitors should be kept in a safe distance from work area. 6. Avoid dangerous environment. Don t use power tools in damp or wet locations or expose them to rain. Keep your work area well lighted. 8. Make workshop kid proof with padlocks, master switches, or by removing starter keys. 9. Don t force tool. It will do the job better and be safer at the rate for which it was designed. 7
8 12. Always use safety glasses. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses. They are NOT safety glasses. 11. Wear proper apparel. Wear no loose clothing, gloves, neckties, rings, bracelets, or other jewellery which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain long hair. 10. Use right tool. Don t force tool or attachment to do a job it was not designed for. 14. Don t overreach. Keep proper footing and balance at all times. 13. Secure works. Use clamps or vices to hold works, when practical. It s safer than using your hands and it frees both hands to operate tool. 16. Disconnect tools before servicing and when changing accessories such as grinding wheels, polishing mops, grinding belts, blades, bits, cutters, etc. 15. Maintain tools with care. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 17. Reduce the risk of unintentional starting. Make sure switch is in off position before plugging in. 18. Use recommended accessories. Consult owner s manual for recommended accessories. Use of improper accessories may cause risk of injury to persons. 8
9 5 PERSONEL PROTECTIVE EQUIPMENT 5.1 Requirements during use Under normal conditions no measures has to be taken. 5.2 Requirements during maintenance The professional employees have to keep the required tools for maintenance and repair in their own cupboard; Screwdriver tools, Wrench tools, Lubricating gun. The machine has to be used by learned and trained employees. The machine has to be used in indoor areas. Keep away from flammable and inflammable substances. The manufacture isn t responsible for any damages caused by changing the standard equipment of the machine. Because of SCANTOOL TSX 1060 GUILLOTINE SHEAR is cutting with two blades the hands and fingers of the operator can be hurt of careless working. Pay attention to observe the safety measures. Don t take out any security parts for any reason. 6 TRAINING OF OPERATORS The operator has to confirm that he/she has read this operating manual and understand everything clearly. In case of incomprehensible or missing cases contact the supplier or manufacturer. The operator is responsible for him/herself and other third persons during the work. 7 WARNINGS DON T PINCH your hand between the blades. DON T PINCH your hand between the press and body. DON T PINCH your hand between the working item and gauge. BE SURE THAT THE MACHINE IS FIXED ON THE GROUND during the installation. 9
10 8 MAINTENANCE INSTRUCTIONS Oil the cutting arm stud once a month with thin oil. 10
11 Oil the press arm once a month with thin oil. Oil the geared cogwheel once a month with grease. Oil the cutting arm once a month with grease. During the oil process move the movable parts to let the oil spread everywhere. Cases of no oiling can cause defects on the working parts of the machine 11
PRODUCT MANUAL TILE CUTTING MACHINE. . Operation. Parts List and Diagram SPECIFICATIONS CAUTION:
FLORCRAFTT TM PRODUCT MANUAL SKU NUMBER 709-4242 SERIAL NUMBER: CAUTION: FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL COMPLETELY AND CAREFULLY BEFORE OPERATING THIS 7 TILECUTTING MACHINE SPECIFICATIONS
More informationBENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS
BENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS 0100 9 Thank you for purchasing this CLARKE BENCH GRINDER. Before attempting to operate this machine, please read this instruction manual
More informationGRIMAX 50,75,100,150 S - BRAKE
B E L T - G R I N D E R S GRIMAX 50,75,100,150 S - BRAKE Table of contents 1. Transport and handling 5 1.1 Transport 5 1.2 Handling 5 1.3 Placing 5 2. Directions 6 2.1 Operation 6 2.2 Safety rules for
More information6 x 10 Belt Disc Sander
6 x 10 Belt Disc Sander FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500400 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT
More informationBENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101
BENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101 Thank you for purchasing this CLARKE Bench Grinder Before attempting to operate this machine, please read this instruction manual thoroughly
More informationDisc Grinder PDA-100H. Handling Instructions. Read through carefully and understand these instructions before use.
Disc Grinder PDA100H Handling Instructions Read through carefully and understand these instructions before use. 1 2 4 6 8 1 2 3 4 5 6 7 9 0 8 L K I G 1 3 5 7 15 ~30 A B 1 A D 5 9 8 B C 0 1 2 J 4 5 8 0
More informationDisc Grinder Model G 18MR G 23MR G 23MRU
Disc Grinder Model G 18MR G 23MR G 23MRU Handling instructions G23MR NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation.
More informationA B 0 0 C D E 6 7 G F F H 8 9 K M O O L N I J 1
1 2 1 5 4 3 2 2 1 6 3 8 7 1 9 4 C A B 5 0 0 D E 6 G 7 F F H 8 K 9 M O O I J L N 1 GENERAL OPERATIONAL PRECAUTIONS 1. Keep work area clean. Cluttered areas and benches invite accidents. 2. Avoid dangerous
More informationORIGINAL INSTRUCTIONS
OPERATION & MAINTENANCE INSTRUCTIONS CBB200 Shown here BUFFER/POLISHER MODEL NO: CBB150, CBB200 PART NO: 6500485, 6500490 ORIGINAL INSTRUCTIONS LS0818 - ISS 1 INTRODUCTION Thank you for purchasing this
More informationINSTRUCTION MANUAL ANGLE GRINDER PT W
INSTRUCTION MANUAL ANGLE GRINDER PT50360 4½ INCHES 120V 60Hz 600W 5A 12,000 rpm C US Note : Before operating this tool, read this manual and follow all safety rules and operating instructions. This electric
More informationHOT AIR GUN MODEL No. CHG 1500B Part No
HOT AIR GUN MODEL No. CHG 1500B Part No. 3400751 OPERATING & MAINTENANCE INSTRUCTIONS 0201 Thank you for selecting this CLARKE Hot Air Gun, which is designed for DIY and professional use alike. Before
More information.JET OWNER1S MANUAL. SR-2024N & SR-2236N Slip Roll *... EQUIPMENT & TOOLS , ~ ,,& JET EQUIPMENT & TOOLS, INC. A WMH Company
.JET EQUIPMENT & TOOLS OWNER1S MANUAL SR-2024N & SR-2236N Slip Roll,;.., ~ "~.:,,& :.' ~.. ; *... JET EQUIPMENT & TOOLS, INC. A WMH Company www.jettools.com P.o. BOX 1349 Auburn, WA 98071-1349 e-mail jet@jettools.com
More informationOPERATOR S MANUAL BGC SERIES BENCH GRINDERS
OPERATOR S MANUAL BGC SERIES BENCH GRINDERS www.jetequipment.com SPECIFICATIONS BGC-6 (240153) BGC-8 (240154) Motor 1/3HP, 1 PH, 115V 1/2HP, 1 PH, 115V Amperage 3.5, 60 Hz 5, 60 Hz R.P.M. 3,450 3,600 Arbor
More informationInstruction Manual For Baldor Buffers
No. 280F Replaces 280E LB7011 Instruction Manual For Baldor Buffers SAFETY NOTICE: WARNING statements describe conditions that may lead to personnel injury including potentially fatal injuries if the machine
More informationCordless High Speed Drill
ENGLISH Cordless High Speed Drill MODEL 6503D 00039 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationCordless Screwdriver
ENGLISH Cordless Screwdriver MODEL 6796D MODEL 6796FD MODEL 6797D MODEL 6797FD MODEL 6798D MODEL 6798FD 00260 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before
More information18V CORDLESS STAPLER/NAILER
18V CORDLESS STAPLER/NAILER MODEL NO: CONSN18LI PART NO: 6487055 OPERATION & MAINTENANCE INSTRUCTIONS LS1213 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,
More informationCyclone 600 Upcut Cut Off Saw
Cyclone 600 Upcut Cut Off Saw WARNING The operator must thoroughly read and understand this manual before operating the cut off saw or starting any servicing. All safety and warning instructions should
More informationSAFETY RULES SPECIFICATIONS READ ALL INSTRUCTIONS BEFORE OPERATING SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE OPERATING SAVE THESE INSTRUCTIONS Thank you for purchasing 7" Polisher. Before attempting to operate your new Polisher please read these instructions thoroughly. You will need
More informationSIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions
SIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
More informationATTENTION: READ THIS MANUAL BEFORE USING YOUR PRODUCT.
F.160 Manual Slitter INSTRUCTION MANUAL ATTENTION: READ THIS MANUAL BEFORE USING YOUR PRODUCT. 1 INSTRUCTION MANUAL Important information you should know: The images in this manual are illustrative and
More information3.5 CUbIC feet portable CEMENT MIxER 02/2015 INSTRUCTION MANUAL MODEL: KC-15CM-2 COPYRIGHT 2014 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
3.5 CUbIC feet portable CEMENT MIxER 02/2015 MODEL: KC-15CM-2 INSTRUCTION MANUAL COPYRIGHT 2014 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. WARRANTY INfORMATION 2-YEAR LIMITED WARRANTY FOR THIS CEMENT
More informationCORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414
CORDLESS TACKER MODEL NO: CCT48 PART NO: 6485070 OPERATION & MAINTENANCE INSTRUCTIONS LS0414 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read
More informationHYDRAULIC TUBE CUTTER
7, OD 7, -/ OD 7, OD HYDRAULIC TUBE CUTTER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, //007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas
More informationRead carefully and follow all safety rules and operating instructions before first use of this product.
operating manual & parts list 82061, 82062, 82071, 82081 & 82101 6, 7, 8 & 10 BENCH GRINDER Read carefully and follow all safety rules and operating instructions before first use of this product. 7.39-020
More informationOperating Manual Please Read Before Operating Unit
Always Moving Forward Operating Manual Please Read Before Operating Unit ST1 Portable Magnet Wire Stripper & Solder Tip Cleaner Service and All Spare Parts Available The Eraser Company, Inc. PO Box 4961/
More informationOPERATING MANUAL Bench Grinder
OPERATING MANUAL Bench Grinder 241-1443 8-inch BENCH GRINDER with dual work lights Customer Service: 1-866-858-2664 Z19 IMPORTANT: Read through this operating manual carefully before using this tool. Pay
More informationRMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool
RMT1201 ORIGINAL INSTRUCTIONS Cordless Multi-Tool Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL
More information24 Volt - 3/8" Cordless Impact Wrench
24 Volt - 3/8" Cordless Impact Wrench INSTRUCTION MANUAL Item # 3994040 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electrical equipment such as this, basic safety precautions should always be followed
More informationFFERoPOLISH. DOUBLE insulated. Introduction Operation Maintenance
SEARS OWNERS MANUAL MODEL NO. 315.10670 CAUTION. Read Rules for Safe Operation and Instructions Carefully TWO-SP ED ELECTRIC FFERoPOLISH DOUBLE insulated FUTURE SAVE THIS MANUAL FOR REFERENCE Introduction
More informationAngle Grinder. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Angle Grinder MODEL GA700, GA700F MODEL GA700S, GA700SF MODEL GA7040S, GA7040SF MODEL GA900, GA900F MODEL GA900S, GA900SF MODEL GA9040S, GA9040SF 00705 DOUBLE INSULATION I N S T R U C T I O N M
More information4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL
CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When
More informationE-DRIV MD-Series DC Torque Control System Calibration Procedure
Revision: 1.1 July 05, 2017 E-DRIV MD-Series DC Torque Control System Calibration Procedure www.mountztorque.com 1080 N 11 th St - San Jose CA 95112-408.292.2214 1 GENERAL SAFETY RULES WARNING! Read and
More informationCD500 KG68 KG75 CD500/KG68-75 UK p01-12.pm /12/99, 1:34 pm
CD500 KG68 KG75 1 Congratulations! On the purchase of your Black & Decker small angle grinder. To ensure the best results from your small angle grinder please read these safety and usage instructions carefully.
More information40 V HEDGE TRIMMER ATTACH YOUR RECEIPT HERE
ITEM #0796788 40 V HEDGE TRIMMER MODEL #KHT 240-07 Español p. 17 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer
More informationoriginal instructions 18V Torch RFP1801
original instructions 18V Torch RFP1801 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL POWER
More information20V Cordless Shrub Shear & Grass Shear P02 P10 P15 WG801 WG801.9
P02 P0 P5 WG80 WG80.9 2 WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth
More information1/2 HP SUMP PUMP OWNER'S MANUAL
TM 1/2 HP SUMP PUMP OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationVARIABLE SPEED JIG SAW
VARIABLE SPEED JIG SAW CORDLESS Part No. IMPACT 6460200 DRILL CORDLESS IMPACT DRILL MODEL No. CON24 Part No. 6485065 OPERATING & MAINTENANCE INSTRUCTIONS 1 LS0610 Thank you for purchasing this CLARKE Cordless
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL MIG 100 GASLESS WELDER TABLE OF CONTENTS Page Safety instructions 3-4 MIG Welders 5 Welder Information 5 Gasless welder set up 6 Operation 6-10 Troubleshooting Guide 11-12 Spare
More informationSubject to change. USERS MANUAL Art.nr. CDM6026 PCD-2400I. NiCd
UK Subject to change UK USERS MANUAL Art.nr. CDM02 PCD-2400I NiCd 040-2 4 1 2 4 R L EXPLODED VIEW 3 Fig. A Fig. D B 1 2 Fig. B Fig. E 3 10 11 SPARE PARTS LIST PCD-2400I A Fig. C 3 Fig. F REF NR DESCRIPTION
More informationASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011
SPARK PLUG CLEANER ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More informationOwner's Manual. Two Speed / Reversible 3/8 in. CORDLESS DRILL-DRIVER. Model No
Owner's Manual Two Speed / Reversible 3/8 in. CORDLESS DRILL-DRIVER Model No. 315.111790 SAFETY OPERATION MAINTENANCE PARTS LIST Save this manual for future reference CAUTION: Read and follow all Safety
More informationInstruction Manual 4.0V Li-Ion Screwdriver. Part #: ECLIPSE ENTERPRISES, INC Chula Road, Amelia Court House, VA 23002, U.S.
Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 ECLIPSE ENTERPRISES, INC. 13302 Chula Road, Amelia Court House, VA 23002, U.S.A 2 3 Intended use Your ECLIPSE ENTERPRISES, INC. 902-588 screwdriver
More informationeclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #:
eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com Test Equipment Depot - 800.517.8431-99
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL WELD AND CUT ARC/TIG INVERTER PLASMA 30 PLASMA CUTTER TABLE OF CONTENTS Safety instructions 3-4 Weld & Cut ARC/TIG and Plasma Cutter 5 Page Installation 6 Welder Information 6-8
More information9 (230mm) ANGLE GRINDER Model No. CAG232
9 (230mm) ANGLE GRINDER Model No. CAG232 OPERATING & MAINTENANCE INSTRUCTIONS 1104 SPECIFICATIONS Motor... 230V~ 50Hz 1ph Power Rating... 2000Watts Fuse Rating... 13Amps No Load Speed... 6,000RPM Wheel/Disc
More informationCompressor Duty Motor - 1 HP. Model 40132
Compressor Duty Motor - 1 HP Model 40132 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL ARC 140 AMP WELDER TABLE OF CONTENTS Page Safety instructions 3-4 Inverter Arc Welder 5 Welder Information 5 Arc 140 AMP welder set up 6 Assembly instructions 6 Operation 7 Welding
More information4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT
SKU 241-1394 4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT Operation Manual WARNING! Please read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS
More informationInstruction Manual For Baldor Tool Grinders
No. 281H Replaces 281G LB7010 Instruction Manual For Baldor Tool Grinders SAFETY NOTICE: WARNING statements describe conditions that may lead to personnel injury including potentially fatal injuries if
More informationRPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner
RPS5 ORIGINAL INSTRUCTIONS Cordless Pruner Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.
More information6, 8 and 10 variable speed Bench Grinders
9682096_9682097_9682098_oipm_En012_9642040.01 01/31/17 12:19 PM Page 1 Operating Manual & Parts List 9682096, 9682097 and 9682098 6, 8 and 10 variable speed Bench Grinders Read carefully and follow all
More informationOPERATOR'S MANUAL. Cat. No. C12 PC. To reduce the risk of injury, user must read and understand operator's manual.
OPERATOR'S MANUAL Cat. No. C12 PC M12 Cordless Copper Tubing Cutter To reduce the risk of injury, user must read and understand operator's manual. General POWER TOOL SAFETY WARNINGS WARNING Read all safety
More informationCordless Driver Drill 6223D
Cordless Driver Drill 6223D SPECIFICATIONS Model 6223D Capacities Steel... 10 mm Wood... 15 mm Wood screw...5.1 mm x 35 mm Machine screw... 6 mm No load speed (min 1 )... 0 700 Overall length... 202 mm
More informationSAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL. SFPM (SM/Min)
3 Wheel Belt Grinder Parts Page Reorder No. PD.36 Effective October 0 SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Model Number Motor hp FLA Voltage Phase Frequency SFPM (SM/Min) Sound Level Weight Pound
More information14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS
14.4 CORDLESS DRILL 40209 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight Tools. All
More information40 V HEDGE TRIMMER ATTACH YOUR RECEIPT HERE
ITEM #0506887 40 V HEDGE TRIMMER MODEL #KHT 240-06 Français p. 17 Español p. 33 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer,
More informationBENCH GRINDER MODEL NO. OZBG150WA
BENCH GRINDER 150mm MODEL NO. OZBG150WA OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS MODEL NO. OZBG150WA Input Power: 150W Input Voltage: 230V ~ 50Hz No Load Speed:
More informationELECTRIC SLIP ROLL MACHINE MODEL: ESR-1016X1.5 ESR-1300X1.5 ESR-2000X1.0
ELECTRIC SLIP ROLL MACHINE MODEL: ESR-1016X1.5 ESR-1300X1.5 ESR-2000X1.0 Operation Manual Table of contents I Main Specification Page 2 II Machinery general safety warnings Page 2 III Instructions.Page
More informationBUFFER/POLISHER SYSTEM
Owner s Manual Double Insulated BUFFER/POLISHER SYSTEM Model No. 646.10729 NRTL CAUTION: Read and follow all safety rules and operating instructions before first use of this product. Safety Rules Operation
More information7.2V Cordless Grass Shear/Shrub
7.2V Cordless Grass Shear/Shrub 1600002 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.greenworkstools.com Read all safety rules and instructions carefully before operating this tool.
More informationInstruction Manual. CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION. Model SROM 1172
Instruction Manual CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION Model SROM 1172 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Product Features: 1. Keyless
More informationW6VB3 W8VB2. Handling instructions
Screw Driver Model W 6VM W 6V4 W 6VA4 W 6VB3 W 8VB2 Handling instructions W6VM W6V4 W6VA4 W6VB3 W8VB2 Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to
More informationELECTRIC CAR POLISHER
ELECTRIC CAR POLISHER MODEL NO: CP254 PART NO: 6462108 OPERATION & MAINTENANCE INSTRUCTIONS LS0610 INTRODUCTION Thank you for purchasing this CLARKE electric car polisher. Before attempting to use this
More informationOperating Instructions and Parts Manual AFS-1000B Air Filtration System
Operating Instructions and Parts Manual AFS-1000B Air Filtration System JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708620B Ph.: 800-274-6848 Revision C 09/2018 www.jettools.com Copyright
More informationBelt Sander JCB-BS950
Safety and operating manual Belt Sander JCB-BS950 ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions
More informationOPERATING and MAINTENANCE INSTRUCTIONS BENDMAX
OPERATING and MAINTENANCE INSTRUCTIONS BENDMAX Compact Power Bender (BML-2000) READ AND UNDERSTAND ALL THE 2017 07/17 (BML-2000) INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR SERVICING
More informationOwner's Manual. Variable Speed / Reversible PROFESSIONAL 3/8 in. CORDLESS DRILL-DRIVER. Model No
Owner's Manual Variable Speed / Reversible PROFESSIONAL 3/8 in. CORDLESS DRILL-DRIVER Model No. 973.274960 SAFETY OPERATION MAINTENANCE PARTS LIST Save this manual for future reference CAUTION: Read and
More informationWHEEL KIT FOR 13 HP GENERATOR
WHEEL KIT FOR 13 HP GENERATOR 94192 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationMN907 No. 285B Replaces 285A LB7012
MN907 No. 285B Replaces 285A LB7012 Instruction Manual For Baldor Grinder--Buffers SAFETY NOTICE: WARNING statements describe conditions that may lead to personnel injury including potentially fatal injuries
More informationECSS. Electric Chain Saw Chain Sharpener Assembly & Operating Instructions
ECSS Electric Chain Saw Chain Sharpener Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides
More information1200W CaR PoliSheR en RS4900
1200W Car Polisher RS4900 RS4900 8 1 2 7 3 4 5 6 A B flat nozzle C D E F 1200W Car Polisher RS4900 G H flat nozzle I J K L 4 1200W Car Polisher COMPONT LIST 1 2 3 4 5 6 7 Variable speed control Switch
More informationWR 22SE WR 25SE WR25SE. Handling instructions
WR 22SE WR 25SE WR25SE Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
More informationASSEMBLY & SERVICE MANUAL
MODEL 365 BACK LAPPING MACHINE ASSEMBLY & SERVICE MANUAL WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning & Safety
More informationAbrasive Blast Cabinet Assembly & Operating Instructions
3951103 Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important
More informationInstruction Manual CORDLESS DRILL & DRIVER 18V. Model SROM 1170
Instruction Manual CORDLESS DRILL & DRIVER 18V Model SROM 1170 Product Features: Dear Valued Customer, Thank you for purchasing this Samson Power Tool. We are dedicated to providing quality Samson Power
More informationElectric Chainsaw Sharpener
Electric Chainsaw Sharpener Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information18V Cordless Chain Saw INSTRUCTION MANUAL
18V Cordless Chain Saw INSTRUCTION MANUAL WARNING: Read and understand RULES FOR SAFE OPERATION and instructions carefully before operating. Failure to follow the safety rules and other basic safety precautions
More information4 in 1 POWER STATION Model: 7226
Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product. Observe all safety information to protect yourself and others. Failure to observe
More informationDISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationPower Head E System. Owners Manual and Safety Instructions Mantis, Div. of Schiller-Pfeiffer Inc. All Rights Reserved.
Power Head E System Owners Manual and Safety Instructions 2006 Mantis, Div. of Schiller-Pfeiffer Inc. All Rights Reserved. Table of Contents Important Information Introduction............................1
More informationAngle Grinder Holder
Angle Grinder Holder Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationInstructions manual / Position Controller 1. GY-G Series INSTRUCTIONS MANUAL
Instructions manual / Position Controller 1 GY-G Series INSTRUCTIONS MANUAL Instructions manual / GY-G Series 2 IMPORTANT The tool delivered with this manual may been modified for specific needs. In that
More informationOPERATOR S MANUAL AUTOMATIC AIR STAPLER A7116AUTO
TM OPERATOR S MANUAL AUTOMATIC AIR STAPLER If this product is not functioning correctly or you are not 100% satisfied please contact Tacwise first by email: consumerfeedback@tacwise.com or telephone 0844
More informationPOWER INVERTER 700 WATT / 1800 WATT PEAK
POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationWARRANTY YEARS ERB013GRD. 115mm ANGLE GRINDER. AG850 ERB013GRD-M indd :58:10
ERB013GRD WARRANTY YEARS AG850 ERB013GRD-M-070609.indd 1 2007-6-13 14:58:10 AG850 ERB013GRD-M-070609.indd 2 2007-6-13 14:58:10 Congratulations on your purchase of a quality power tool from Screwfix Direct
More informationOFF SAFETY AND OPERATING MANUAL 120W CAR BUFFER/POLISHER
OFF ON SAFETY AND OPERATING MANUAL 120W CAR BUFFER/POLISHER Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this
More informationIMPORTANT! Safety Instructions. m WARNING. Grass Shear/Shrubber. All Operators Must Read These Instructions Before Use
Grass Shear/Shrubber Model No. HJ602C Form No. SJ-HJ602C-880E A Division of Snow Joe, LLC IMPORTANT! Safety Instructions All Operators Must Read These Instructions Before Use Always follow these safety
More informationOWNER S MANUAL AFS-1500 Air Filtration
OWNER S MANUAL AFS-1500 Air Filtration JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 253-351-6000 A WMH Company Auburn, WA 98071-1349 Fax 800-274-6840 www.jettools.com e-mail jet@jettools.com M-708614 6/2001
More informationOwner's Manual. Variable Speed / Reversible INDUSTRIAL 3/8 in. CORDLESS DRILL-DRIVER. Model No CAUTION:
Owner's Manual Variable Speed / Reversible INDUSTRIAL 3/8 in. CORDLESS DRILL-DRIVER Model No. 315.274940 SAFETY OPERATION MAINTENANCE PARTS LIST Save this manual for future reference CAUTION: Read and
More informationSawhorse with Chainsaw Holder
Sawhorse with Chainsaw Holder Owner s Manual Chainsaw not included. WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More information12V CORDLESS DRILL DRIVER. Model HY2150. User Manual
12V CORDLESS DRILL DRIVER Model HY2150 User Manual CONTENTS Section Description Page N o /N o s 1. OWNER S MANUAL & SAFETY INSTRUCTIONS 3 2. GENERAL SAFETY 3 5 3. BATTERY PACK 5 6 4. CHARGING 6 5. INSERTING/REMOVING
More informationBelt/Disc. Set up and Operating Instructions
Belt/Disc Sander 34951 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationElectric Chainsaw Sharpener With Bar Mount
Electric Chainsaw Sharpener With Bar Mount Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationLi-ion Cordless Screwdriver
Li-ion Cordless Screwdriver HPC-0023 Please note that your safety is your personal responsibility PLEASE READ BEFORE USE AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. IMPORTANT NOTE: ALWAYS CHECK
More informationOperating Instructions and Parts Manual AFS-2000 Air Filtration
Operating Instructions and Parts Manual AFS-2000 Air Filtration JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708615 Ph.: 800-274-6848 Revision B1 02/2014 www.jettools.com Copyright 2014
More informationProfessional Bench Grinder
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More information1000 Lb. Motorcycle Lift
1000 Lb. Motorcycle Lift 91764 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More informationOperating Manual Please Read Before Operating Unit
Always Moving Forward Operating Manual Please Read Before Operating Unit Model IK10 Pre-Stripper Service and All Spare Parts Available The Eraser Company, Inc. PO Box 4961/ Oliva Drive Syracuse, NY 13221,
More information