SM Series. High-Performance Stepper Motors. Industry-standard NEMA frame stepper motors. Available encoder feedback and brake options
|
|
|
- Donna Douglas
- 6 years ago
- Views:
Transcription
1 SM Series Rotary Motors SM Series High-Performance Stepper Motors Industry-standard NEMA frame stepper motors Available encoder feedback and brake options Models to run off of North American & Asian/European line voltages Optimized performance for use with Aerotech stages High-performance micro-stepping up to 5, steps/revolution Vacuum and cleanroom versions available SM series stepper motors are available in NEMA 17 to NEMA 34 frame sizes. The SM series of stepper motors brings efficiency of motion to Aerotech s line of rotary motor products. With ample torque at high velocities, the SM series is a perfect stand-in for DC brushed or brushless rotary motors in nearly any medium-accuracy motion application. With multiple offerings in frame sizes from NEMA 17 to NEMA 34, the SM series provides additional options to meet our customers needs. Design and Integration Flexibility The SM series motors have been designed with optional direct encoder feedback, a holding brake, or even a viscous damper to improve the dynamic response of the rotor. These standard options allow the SM series to adapt to many common motion applications and extend their capabilities for use in a wider array of processes than a general stepper motor. Line Voltage Capable The NEMA 23 and NEMA 34 frame size SM series motors are available in a high-voltage optimized design. This produces optimum performance at both North American and European/Asian line voltages without the need for a transformer, further streamlining the system solution. 1
2 SM Series SPECIFICATIONS Motor Model SM35 SM6-VT1 SM6-VT2 SM1-VT1 SM1-VT2 Frame Size NEMA 17 NEMA 23 Stall Torque.78 N m (111 oz in) 1.23 N m (175 oz in) 1.41 N m (2 oz in) 1.85 N m (262 oz in) 2.5 N m (354 oz in) Rated Amps Per Phase 3. A 2.8 A.84 A 3.5 A.99 A Maximum Recommended Motor Voltage (1) 35 V 35 V 16 V 35 V 16 V Rotor Inertia 1.2E-5 kg m 2 (.14 oz in s 2 ) 3.E-5 kg m 2 (.42 oz in s 2 ) Full Step Angle 1.8 Accuracy ±.9 Maximum Radial Load 2.9 kg (6.3 lb) 7.7 kg (17 lb) Maximum Thrust Load 1. kg (2.2 lb) 1.5 kg (3.4 lb) 4.8E-5 kg m 2 (.68 oz in s 2 ) 5.21E-5 kg m 2 (.74 oz in s 2 ) Weight.5 kg (1.1 lb).7 kg (1.6 lb) 1. kg (2.2 lb) 1.2 kg (2.6 lb) Rotary Motors SM Series 1.Maximum recommended motor voltage describes voltage seen by the motor coils. Motor Model SM28-VT1 SM28-VT2 SM465-VT1 SM465-VT2 Frame Size NEMA 34 Stall Torque 4.5 N m (637 oz in) 8.75 N m (1238 oz in) 12. N m (17 oz in) 11.5 N m (1637 oz in) Rated Amps Per Phase 7.1 A 3.4 A 7.1 A 2.94 A Maximum Recommended Motor Voltage (1) 48 V 16 V 48 V 16 V Rotor Inertia 1.41E-4 kg m 2 (.2 oz in s 2 ) 2.7E-4 kg m 2 (.38 oz in s 2 ) Full Step Angle 1.8 Accuracy ±.9 Maximum Radial Load Maximum Thrust Load 22.5 kg (5 lb) 6.1 kg (14 lb) 4.2E-4 kg m 2 (.57 oz in s 2 ) Weight 2.3 kg (5.1 lb) 3.8 kg (8.4 lb) 5.4 kg (12 lb) 5.3 (11.7 lb) 1.Maximum recommended motor voltage describes voltage seen by the motor coils. 2
3 SM Series MOTOR PERFORMANCE SM35 Torque vs. Speed BMS Series Rotary Motors.8 35 V V SM6- VT1 Torque vs. Speed SM6- VT2 Torque vs. Speed V 24 V V 8 V SM1- VT1 Torque vs. Speed SM1- VT2 Torque vs. Speed V 24 V V 8 V
4 SM Series MOTOR PERFORMANCE SM28- VT1 Torque vs. Speed SM28- VT2 Torque vs. Speed V 24 V V 8 V Rotary Motors BMS Series SM465- VT1 Torque vs. Speed SM465- VT2 Torque vs. Speed V 24 V V 8 V
5 SM Series DIMENSIONS NEMA 17 SM Series Rotary Motors 4X M3X ±.8.94± ±.3.18±.1 FLAT 2.8 "A" "B" E1, -E2 ONLY FEEDBACK CABLE MOTOR CABLE MOTOR A B SM35 NO BRAKE [4.53] 42.2 [1.66] SM35 WITH BRAKE [4.72] 44.4 [1.75] 25-PIN D CONNECTOR 9-PIN HIGH-POWER D CONNECTOR DIMENSIONS: MILLIMETERS [INCHES] 5
6 SM Series DIMENSIONS NEMA 23 Rotary Motors SM Series 6
7 SM Series DIMENSIONS Rotary Motors NEMA 34 SM Series 7
8 SM Series ORDERING INFORMATION Ordering Example SM465 -BK -VT1 Stepper Motor Model Add-Ons Bus Voltage Selection SM35 SM6 SM1 SM28 SM465 Stepper Motors: Permanent Magnet, SM Series SM35 NEMA 17 stepper motor SM6 NEMA 23 stepper motor SM1 NEMA 23 stepper motor, high torque SM28 NEMA 34 stepper motor SM465 NEMA 34 stepper motor, high torque -CN1 -BK -E1 -E2 -D -VT1 -VT2 Rotary Motors SM Series Add-Ons (Optional) -CN1 Standard connectorized motor -BK Holding brake -E1 1-line incremental square-wave encoder with marker (RS-422 line-drive output) -E2 1-line incremental 1 Vpp amplified sine-wave encoder with marker -D (1) Viscous damper Note: 1. Viscous Damper option only available on NEMA 17 and NEMA 23 SM motors. Bus Voltage Selection (Optional for NEMA 23 & NEMA 34 Motors Only) -VT1 Low voltage model -VT2 High voltage model 8
SM Series. Hybrid, Permanent Magnet Motors. Industry-standard NEMA 23 and 34 frame sizes for ease of installation
SM Series Rotary Motors SM Series Hybrid, Permanent Magnet Motors Industry-standard NEMA 23 and 34 frame sizes for ease of installation Torque of 0.3 to 2.6 N-m (38 to 370 oz-in) covers virtually any application
BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control
BMS Series Rotary Motors BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype
SM Series. Hybrid, Permanent Magnet Motors. Industry-standard NEMA 23, 34, and 42 frame sizes for ease of installation
SM Series Hybrid, Permanent Magnet Motors Industry-standard NEMA 2, 4, and 42 frame sizes for ease of installation Torque of 0.27 to 7.42 N-m (8 to 1050 oz-in) covers virtually any application requirement
AGR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Enhanced speed and load capacity
AGR Series Mechanical-Bearing, Worm-Driven Rotary Stage Enhanced speed and load capacity Innovative precision worm-gear assembly (patent pending) provides outstanding accuracy and repeatability over a
BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control
BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype motors with the advantage
BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control
BMS Series Rotary Motors BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype
BM Series. DC Brushless Rotary Servomotors. Standard NEMA frame sizes. Neodymium iron boron rare-earth magnets maximize performance
BM Series Rotary Motors BM Series DC Brushless Rotary Servomotors Standard NEMA frame sizes Neodymium iron boron rare-earth magnets maximize performance Skewed stator with 8-pole design minimizes torque
AGR Series Gear-Driven Rotary Stages
AGR Series Gear-Driven Rotary Stages Enhanced speed and load capacity Large aperture addresses a wide range of applications Continuous 360 degrees rotary positioning Rotary Stages AGR Series Direct encoder
ALAR Series Direct Drive, Large-Aperture, Rotary Stage
ALAR Series Direct Drive, Large-Aperture, Rotary Stage 5 different aperture sizes: 100 mm, 150 mm, 200 mm, 250 mm, 325 mm Continuous or limited travel Axial load capacity up to 595 kg Rotary Stages ALAR
PRO225SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package
Linear Stages PRO2SL/SLE Series PRO2SL/SLE Series Mechanical Bearing, Ball-Screw Stage Improved second-generation design High-performance in a cost-effective package Rugged mechanical construction Optional
ECO115SL Series. Mechanical Bearing, Ball-Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design
Linear Stages Mechanical Bearing, Ball-Screw Stage High-performance in a cost-effective, economic package Rugged mechanical design Available with servomotor or stepping motor Nine models with travels from
ECO165SL Series. Mechanical Bearing, Ball Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design
Linear Stages Mechanical Bearing, Ball Screw Stage High-performance in a cost-effective, economic package Rugged mechanical design Available with servomotor or stepping motor Nine models with travels from
PRO225-HS (High Speed) Series
Linear Stages PRO225-HS (High Speed) Series Mechanical Bearing, Ball-Screw Stage Twelve models with travels from mm to 1500 mm More than 6X speed capability of the regular PRO series up to 1400 mm/s -seal
ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage
ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage Travel lengths up to 250 mm with anti-creep crossed-roller bearings Optional center-mounted linear encoder for direct position feedback
APR Series High-Precision Mechanical Bearing Rotary Stage
APR Series High-Precision Mechanical Bearing Rotary Stage Accuracies to 1.5 arc second load capacity up to 2 kg Incremental or absolute encoders Large bearings provide high payload and moment load capacity
ADRT Series Rotary Stages
ADRT Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding wobble and runout Direct coupled, high-accuracy
ABL1000 Series. Air-Bearing, Direct-Drive Linear Stage. Designed for high-performance alignment and assembly. 0.5 nm closed-loop resolution
Linear Stages Air-Bearing, irect-rive Linear Stage esigned for high-performance alignment and assembly 0.5 nm closed-loop resolution Fully preloaded air-bearing Low-noise linear amplifiers Complete noncontact
PRO165LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Ten models with travels from 100
Ultra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
ATS150 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
Linear Stages Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Submicron accuracy Optional
ADRS Series Mechanical-Bearing Rotary Stage
ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary
ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series
ADRS Series Mechanical-Bearing Rotary Stage
ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary
PRO165SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package
PRO165SL/SLE Series Mechanical Bearing, Ball-Screw Stage Improved second-generation design High-performance in a cost-effective package Rugged mechanical construction Optional linear encoder 18 models
Screw Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
APR Series. Direct-Drive Rotary Stage. Accuracies to 1.5 arc second. Axial load capacity up to 250 kg. Incremental or absolute encoders
APR Series Rotary Stages APR Series Direct-Drive Rotary Stage Accuracies to 1.5 arc second load capacity up to 2 kg Incremental or absolute encoders Large bearings provide high payload and moment load
PRO225LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Twelve models with travels from
BLM Series. Linear Motors. High output force in an 86.4 mm x 34.3 mm cross section
BLM Series Linear Motors BLM Series Linear Motors High output force in an 86.4 mm x 34.3 mm cross section Continuous force to 397.6 N (89.4 lb; peak force to 1590.4 N (357.5 lb High-energy rare-earth magnets
ACS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic ER collet chuck or 3-jaw gripper. Clear aperture for product feed-through
ACS Series Rotary Stages ACS Series Mechanical-Bearing Rotary Stage Integral pneumatic ER collet chuck or 3-jaw gripper Clear aperture for product feed-through Normally-closed or -open gripper options
ARMS Series Rotary Motion Simulators
ARMS Series Rotary Motion Simulators Designed for highly accurate motion generation Velocity stability of 0.0001% over 360 Position resolution to 0.02 arc sec Payloads to 230 kg Integrated slip rings and
KM SERIES HIGH TOR.
SLO-S O-SYN KM SERIES HIGH TOR ORQUE STEP ORS KM SERIES Superior Electric SLO-SYN long recognized as the leader in step motor technology, has achieved new levels of performance with its high energy KM
PRO280LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Eight models with travels from 300
AXR Series Two-Axis Rotary Assembly
AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to
PRO115LM Series. Mechanical Bearing, Linear Motor Stage. Aerotech s smallest sealed linear motor stage. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Aerotech s smallest sealed linear motor stage Rugged mechanical construction High-performance in a cost-effective package Direct-drive linear motor
ECO225LM Series. Mechanical Bearing, Linear-Motor Stage. High-performance in a cost-effective, economic package. Rugged mechanical design
Linear Stages Mechanical Bearing, Linear-Motor Stage High-performance in a cost-effective, economic package Rugged mechanical design Direct-drive linear motor for precision motion Nine models with travels
LaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform
LaserTurn 1 Laser Machining System Highly integrated linear/rotary motion platform Pneumatically-actuated collet closer supports 0.1 mm to 7.9 mm O.D. materials with frictionless rotary union Clear aperture
Hybrid Stepper Motors
DINGS Electrical & Mechanical Co., Ltd 3 Quality Performance Flexibility Price WHO IS DINGS? DINGS is a premier supplier of rotary and linear step motors. Based in the greater Shanghai, China area, we
L VC and L SC Cantilevered Load Capability (ATS115)
Linear Stages Mechanical Bearing, Ball-Screw Stage Travels up to 600 Speeds up to 300 /s Side seal design with hard-cover Low-cost; high performance Long-life linear motion guide bearing system The ATS115
ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series
BLMUC Series Linear Motors
BLMUC Series Linear Motors Ultra-compact size for tight space constraints; 52.0 mm x 20.8 mm cross section Continuous force to 58.0 N (13.0 lb); peak force to 231.8 N (52.1 lb) Non-magnetic forcer coil
ServoRings TM - integrated rotary tables with high torque servo ring motor, high resolution ring encoder and high accuracy ring bearing
ServoRings TM - integrated rotary tables with high torque servo ring motor, high resolution ring encoder and high accuracy ring bearing Operating principle ServoRing TM rotary tables use segmented three
1000 Series Brush, Rotary DC Servomotors
1000 Series rush, Rotary Servomotors ynamically balanced, skewed rotor for exceptionally smooth velocity Standard NEM 23, 34, and 42 frame sizes Standard stainlesssteel shaft resists corrosion ouble shielded
ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system
ALS20000 Series Mechanical Bearing, Linear Motor Stage Protective metal waycover Integral cable management system Ideally suited for clean-room applications Compact, high-performance, linear motor stage
ANT130-L-ZS Series. Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages. Nanometer performance in a large travel format (35 mm to 160 mm )
ANT130-L-ZS Series Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages Nanometer performance in a large travel format (35 mm to 160 mm ) Dual-counterbalance, low-profile design High-dynamic,
CCS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic collet chuck
CCS Series Rotary Stages CCS Series Mechanical-Bearing Rotary Stage Integral pneumatic collet chuck Captive collet design minimizes axial tube motion during clamp/unclamp cycles Clear aperture for product
Product Manual. 42BYGH40(M)-160-4A NEMA 17 Bipolar 5.18:1. Planetary Gearbox Stepper
Product Manual 42BYGH40(M)-160-4A NEMA 17 Bipolar 5.18:1 Planetary Gearbox Stepper Phidgets - Product Manual 42BYGH40(M)-160-4A NEMA 17 Bipolar 5.18:1 Planetary Gearbox Stepper Phidgets Inc. 2011 Contents
BLM Series. Linear Motors. High output force in an 86.4 mm x 34.3 mm cross section
BLM Series Linear Motors High output force in an 86.4 mm x 34.3 mm cross section Continuous force to 397.6 N 89.4 lb); peak force to 1590.4 N 357.5 lb) High-energy rare-earth magnets used in magnet tracks
ABL1500 Series. Air Bearing, Linear Motor Stage. Designed for high-performance scanning and inspection. Active air preload on all air-bearing surfaces
ABL10 Series Air Bearing, Linear Motor Stage Designed for high-performance scanning and inspection Active air preload on all air-bearing surfaces Linear encoder feedback provides subnanometer resolution
MANTECH ELECTRONICS. Stepper Motors. Basics on Stepper Motors I. STEPPER MOTOR SYSTEMS OVERVIEW 2. STEPPING MOTORS
MANTECH ELECTRONICS Stepper Motors Basics on Stepper Motors I. STEPPER MOTOR SYSTEMS OVERVIEW 2. STEPPING MOTORS TYPES OF STEPPING MOTORS 1. VARIABLE RELUCTANCE 2. PERMANENT MAGNET 3. HYBRID MOTOR WINDINGS
Motor Types. Motor and Controls Introduction to Motors & Controls
Motor and Controls www.velmex.com Motor Types MO92 MO91 PK268 These motors advance 0.9 degrees per step with half step controllers. Step accuracy is 3% noncumulative. For incremental positioning or accurate
BM/BMS Brushless Motor Hardware Manual Revision:
BM/BMS Brushless Motor Hardware Manual Revision: 2.07.00 Global Technical Support Go to www.aerotech.com/global-technical-support for information and support about your Aerotech products. The website provides
SM-1000 SERIES ROTARY ACTUATORS
SM-1000 SERIES ROTARY ACTUATORS GENERAL DESCRIPTION The SM-1000 Series are multi-turn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating positioning control. Designed
ADR175/240 Series. Mechanical-Bearing Rotary Stage. Direct-drive brushless servomotor. Cog-free design for outstanding velocity stability
DR175/240 Series Mechanical-Bearing Rotary Stage Direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding error motions Direct coupled, high-accuracy rotary encoder
Why a CanStack motor 118 What is a canstack motor 119 How to select your canstack motor 121 Where to apply your canstack motor 123 Specifications 124
CANSTACK stepper motors 15M 20M 55M 42M 26M 35M Portescap can trace its roots back to the design team who invented the Permanent Magnet Stepper and AC Synchronous Motor. Today, this technology is found
ECO115SL Hardware Manual. Revision:
ECO115SL Hardware Manual Revision: 1.01.00 Global Technical Support Go to www.aerotech.com/global-technical-support for information and support about your Aerotech products. The website provides downloadable
AXR Series. Two-Axis Rotary Assembly. Multiple configurations support a range of load and accuracy requirements
AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to
UNIT 7: STEPPER MOTORS
UIT 7: TEPPER MOTOR 1 TEPPER MOTOR tepper motors convert digital information to mechanical motion. tepper motors rotate in distinct angular increments (steps) in response to the application of digital
SOME FACTORS THAT INFLUENCE THE PERFORMANCE OF
SOME FACTORS THAT INFLUENCE THE PERFORMANCE OF Authored By: Robert Pulford Jr. and Engineering Team Members Haydon Kerk Motion Solutions There are various parameters to consider when selecting a Rotary
AC Motors vs DC Motors. DC Motors. DC Motor Classification ... Prof. Dr. M. Zahurul Haq
AC Motors vs DC Motors DC Motors Prof. Dr. M. Zahurul Haq http://teacher.buet.ac.bd/zahurul/ Department of Mechanical Engineering Bangladesh University of Engineering & Technology ME 6401: Advanced Mechatronics
Application Note : Comparative Motor Technologies
Application Note : Comparative Motor Technologies Air Motor and Cylinders Air Actuators use compressed air to move a piston for linear motion or turn a turbine for rotary motion. Responsiveness, speed
Scroll down to view your document!
Over 1 years cumulative experience 24 hour rush turnaround / technical support service Established in 1993 The leading independent repairer of servo motors and drives in North America. Visit us on the
Closed Loop Stepper Systems
Closed Loop Stepper Systems E -Series High Performance Steppers The new ecl series introduces simple and precise closed loop control to Parker s microstepping product platform. Available in two driver
POSITIONING STAGES AND SYSTEMS
POSITIONING STAGES AND SYSTEMS DEVELOPING HIGHLY ENGINEERED LINEAR POSITIONING SYSTEMS THAT IMPROVE PRECISION, INCREASE PRODUCTIVITY AND CREATE VALUE FOR CUSTOMERS Linear and Rotary Positioning Stages
BLMC Series. Linear Motors. Compact size for tight space constraints; 57.2 mm x 31.8 mm cross section
BLMC Series Linear Motors Compact size for tight space constraints; 7.2 mm x 31.8 mm cross section Continuous force to 184.0 N (41.4 lb); peak force to 736.0 N (16. lb) Non-magnetic forcer coil provides
Product Selection Guide
www.marshbellofram.com Product Selection Guide ServoTek Products About ServoTek Products 3 Technical Specifications 4 Mounting Dimensions 5 A Series 0 to 10VCDC Tachometers 6 B Series 11 to 24VDC Tachometers
Primer. Stepper Motors
Primer Stepper Motors Phidgets - Primer Manual Motors Phidgets Inc. 2011 Contents 4 Introduction 5 Types of Stepper Motors 7 Controlling the Stepper Motor 9 Selecting a Gearbox 10 Glossary of Terms Introduction
with SERVOSTAR CD & 600 drives Systems Technical Publication
with SERVOSTAR CD & 6 drives s Technical Publication The DDR (Direct Drive Rotary) Story Kollmorgen GOLDLINE DDR What is direct drive? Very simply it is the direct coupling of the torque motor (such as
AMG-GR Hardware Manual. Revision:
AMG-GR Hardware Manual Revision: 1.01.00 Global Technical Support Go to www.aerotech.com/global-technical-support for information and support about your Aerotech products. The website provides downloadable
LIMITED ANGLE TORQUE MOTORS
LIMITED ANGLE TORQUE MOTORS Limited Angle Torque Motors H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion (
Stepper Motors. Wide Range of Motor Sizes! Motor Wiring D-1
Stepper Motors Frame Sizes From NEMA 11 to 34 Wide Range of Motor Sizes! All models shown smaller than actual size. Motor Wiring OMEGA offers a robust line of 2-phase biploar step motors ranging in frame
Robot components: Actuators
Robotics 1 Robot components: Actuators Prof. Alessandro De Luca Robotics 1 1 Robot as a system program of tasks commands Robot actions working environment mechanical units supervision units sensor units
Actuators are the muscles of robots.
6.1 INTRODUCTION Actuators are the muscles of robots. Several types of actuator noteworthy? Electric motors? Servomotors? Stepper motors? Direct-drive electric motors? Hydraulic actuators? Pneumatic actuators?
QMOT Motor QSH4218 Manual 42mm QMOT motor family
QMOT Motor QSH4218 Manual 42mm QMOT motor family Trinamic Motion Control GmbH & Co. KG Sternstraße 67 D 20357 Hamburg, Germany Phone +49-40-51 48 06 0 FAX: +49-40-51 48 06 60 http://www.trinamic.com INFO@TRINAMIC.COM
Brushless Servo Motors
Quantum QB56 Series Housed Brushless Servo Motors NEMA Size 56 High Power Density, Sinusoidal BEMF Allied Motion s Quantum (QB) housed brushless servo motors are designed for use in precision servo applications
Silencer Series Brushless DC Motors
TYPICAL APPLICATIONS Medical equipment - pumps, blowers and electric scooters and wheelchairs Automatic door and window openers Computer-controlled embroidery machines Scanners Packaging equipment and
Schedule of Events. Mech 1751: Introduction to Mechatronics. What is an actuator? Electric Actuators and Drives. Actuators. Dr. Stefan B.
Schedule of Events Week Date Content Assignment Notes Mech 1751: Introduction to Mechatronics Actuators 1 2 3 4 5 6 7 8 9 09/3 16/3 23/3 30/3 6/4 20/4 27/4 4/5 11/5 Introduction Design Process System Modelling
ZETA advanced microstep drive. Microstepping systems - the next generation... Automation. Quicker settling following a speed change
ZETA-2 advanced microstep drive Microstepping systems - the next generation... The new ZETA series drives from Parker represent a true revolution in microstep drive design. Incorporating breakthrough techniques
QMOT Motor QSH4218 Manual 42mm QMOT motor family
QMOT Motor QSH4218 Manual 42mm QMOT motor family Trinamic Motion Control GmbH & Co. KG Sternstraße 67 D 20357 Hamburg, Germany http://www.trinamic.com QSH4218 Manual (V1.03 /13-November-2007) 2 Table of
Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
Identifying the Motorized RGS part number codes when ordering
RGS04 Motorized with 28000 Series Size11 DS RGS04 Linear Rail for Hybird 28000 Series Size 11 Double Stacks and RGS04 for 43000 Series Size 17 Single and Double Stacks (See Page 4) RGS04 Linear Rail with
ATS1000 Series. Mechanical Bearing, Ball-Screw Stage. Precision-ground ball screw. Long-life linear motion guide bearing system
ATS1000 Series Mechanical Bearing, Ball-Screw Stage Precision-ground ball screw Long-life linear motion guide bearing system Low-cost high performance stage Optional bellows waycovers Optional hard cover
DS4-SERIES POSITIONING TABLES
www.danahermotion.com/ds4 DS4-SERIES POSITIONING TABLES Performance & Versatility in a compact design For single- & multiaxis requirements, DS4 is your modular solution. PERFORMANCE DURABILITY FLEXIBILITY
FiberGrate 2000 Series
FiberGrate 2000 Series Linear, Air Bearing Subsystem Fully preloaded air bearing Advanced Automation 3200 PCbased controller Lownoise linear amplifiers Complete noncontact design Includes granite base,
H-Series Servomotors. AC Brushless Servomotors. Understanding the H-Series Servomotor Model Numbers
C Brushless Servomotors H-Series Servomotors ORMEC's H-series servomotors offer continuous stall torques from to (. to 7 ). ORMEC s H-series C brushless servomotors provide high torque-toinertia ratios
PAS Series AC Servo Motor. Datasheet
PAS Series AC Servo Motor Datasheet Version PAS 2013 01 http://www.primopal.com Description PrimoPal offers a wide selection of high performance brushless AC servo motors, with power ratings from 200 W
Kinetix Rotary Motion Specifications
Technical Data Kinetix Rotary Motion Specifications Kinetix VP, MP-Series, Kinetix 6000M, TL-Series, HPK-Series, RDD-Series Topic Page Topic Page Kinetix VP Low Inertia Motors 2 Kinetix 6000M Integrated
Electromechanical Rotary Actuator
Electromechanical Rotary Actuator TYPICAL APPLICATIONS Axis motion control for gimbal and pedestal systems Azimuth, elevation, fold / unfold, leveling control Suitable for airborne and ground based systems
Robot components: Actuators
Robotics 1 Robot components: Actuators Prof. Alessandro De Luca Robotics 1 1 Robot as a system program of tasks commands Robot actions working environment mechanical units supervision units sensor units
QMOT QSH4218 MANUAL. QSH mm 1A, 0.27Nm mm 1A, 0.35Nm mm 1A, 0.49Nm mm 2.8A, 0.40Nm V 1.
QMOT STEPPER MOTORS MOTORS V 1.06 QMOT QSH4218 MANUAL + + QSH-4218-35-10-027 42mm 1A, 0.27Nm -41-10-035 42mm 1A, 0.35Nm -51-10-049 42mm 1A, 0.49Nm + + -47-28-040 42mm 2.8A, 0.40Nm TRINAMIC Motion Control
Silencer Series Brushless DC Motors
Silencer Series Brushless DC Motors Medical and Commercial / Industrial TYPICAL APPLICATIONS Medical equipment - handheld devices, drills and saws Robotic systems Test and measurement equipment Pumps Scanners
SLM/SLG SERIES. SLM Series Motors/SLG Series Gearmotors BRUSHLESS AC OR DC SERVO MOTOR / INTEGRATED SERVO GEARMOTOR
SLM Series Motors/SLG Series Gearmotors SLM/SLG SERIES BRUSHLESS AC OR DC SERVO MOTOR / INTEGRATED SERVO GEARMOTOR Compatible with virtually any manufacturer s servo drive Multiple frame size options 952.5.62
ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system
ALS20000 Series Mechanical Bearing, Linear Motor Stage Protective metal waycover Integral cable management system Ideally suited for clean-room applications Compact, high-performance, linear motor stage
Servomotors. AC brushless servomotors TGT a TGH
Servomotors AC brushless servomotors TGT a TGH AC brushless servomotors TGT The TGT series AC synchronous servomotors are characterized by: low inertia, small dimensions, high dynamics, high adaptability
Direct Drive Rotary An Increasingly Attractive Servo Choice
Direct Drive Rotary An Increasingly Attractive Servo Choice DDR systems are available in frameless, housed and the newly developed Cartridge motor format. While many engineers are familiar with the basics
Product Overview. Hansen Precision Electric Motors DC AC DC. Actuators. Stepper
AC Hansen Precision Electric Motors Hansen s quality products are known around the world. These include: Synchron Motors, available with custom voltage, speed and power, durable brush motors, AC clock
E180 DIAMETER FRAMES
E18 DIAMETER FRAMES MODEL NUMBER CODE...E18 FRAME To construct a motor listing, select the combination of features required and put all the coded information in the proper sequence. Please account for
Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive
Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive Catalog No. 0001-A Introducing Bearing Engineers new line of Heavy Duty Actuators Type HDS & HDB Construction 1. Base: Anodized Aluminum
Product Selection Guide
Product Selection Guide www.marshbellofram.com About ServoTek Products 3 Technical Specifications 4 A Series 1 to 10 VDC 5 B Series 11 to 24 VDC 6 D Series 25 to 50 VDC 7 E Series Sub Minature 8 Specialty
Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide
MACCON GmbH Kübachstr.9 D-81543 München Tel +49-89-65122()-21 Fax +49-89-655217 Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide Selection Guide Quantum
MASSACHUSETTS INSTITUTE OF TECHNOLOGY DEPT OF MECHANICAL ENGINEERING
MASSACHUSETTS INSTITUTE OF TECHNOLOGY DEPT OF MECHANICAL ENGINEERING 2.004 Dynamics and Control II Laboratory Note: Description of the Experimental Rotational Plant 1 INTRODUCTION In the first series of