Workstation Systems APS

Size: px

Start display at page:

Download "Workstation Systems APS"

Sybil Farmer
6 years ago
Views:

1 536

APS Technical Information.......................... 538 543 Single s.

.............................. 576 585 Handling Lines.

....... 593 597 FIFO Rack................................... 598 599.

2 APS Technical Information Single s Multiple Assembly Lines Handling Lines for Assembly and Handling Lines FIFO Rack Modular Packing Stations

3 538

bott plans and implements custom workstation systems. Our services start with analysis, design and planning in close cooperation with our partner - the customer.

4 Flexibility Modularity Functionality Ergonomics. These are the system benefits offered by bott workstation systems. The APS range of products has been specifically conceived to allow the creation of individual workstations and work processes using modular components. bott plans and implements custom workstation systems. Our services start with analysis, design and planning in close cooperation with our partner - the customer. New production and logistics concepts place exacting demands on workstation design. International competition demands planning that is increasingly cost-effective and productive. bott meets these challenges, drawing from a steadily growing fund of cross-sector concepts. bott offers a sophisticated, modular system with many advantages in terms of flexibility and functionality. The modular nature of our system means that it can be upgraded and expanded at any time to create cost-conscious, customised variants. We use Chipline to design and realise customer wishes that go beyond the technical possibilities of our modular system. The 3D visualisation of ideas and potential solutions is very important to bott. The customer gets a detailed, accurate layout that is thought through right down to accessories like swivel arms, end shelves, lighting, power supplies and much more. 539

are customer-specific solutions for optimal work processes highly flexible system solutions from bott.

workstation systems. Feeder systems like workshop trolleys and FIFO racks are utility elements of high practical benefit.

This huge modular 'kit' reduces setup times to a minimum, allowing entire assembly lines to be quickly reconfigured at any time to suit new tasks and processes using existing elements.

5 are customer-specific solutions for optimal work processes highly flexible system solutions from bott. Modular System The modular structure offers almost limitless systematic and functional possibilities for applications ranging from single workstations to assembly and handling lines via multiple workstation systems. Feeder systems like workshop trolleys and FIFO racks are utility elements of high practical benefit. The Modular Principle All components are based on system dimensions that are matched to all accessories. This huge modular 'kit' reduces setup times to a minimum, allowing entire assembly lines to be quickly reconfigured at any time to suit new tasks and processes using existing elements. Ergonomics Properly planned workstations prevent physical harm to the human body. By ensuring optimum access to components and tools they will enhance the performance potential of your operatives as well as their motivation. bott solutions incorporate the very latest technology and fulfil every requirement. Productivity Many real-life examples provide concrete evidence of significant increases in productivity by accelerating throughput times and reducing setup times. A clear, see-at-a-glance layout and proper organisation will aid assembly. Assembly materials, aids and tools can all be stored and retrieved conveniently and ergonomically with standardised components. Use bott's practical system solutions to create customised workstations and optimise work processes

Roller track and FIFO rack system Working hand-in-hand:

The roller track interlinks multiple workstations to

The FIFO rack system is kitted from outside the assembly

just in the right place. Modularity creates flexibility.

6 Roller track and FIFO rack system Working hand-in-hand: Roller track and FIFO rack system. The roller track interlinks multiple workstations to optimise process flows from ergonomic standpoints. The FIFO rack system is kitted from outside the assembly zone and ensures smooth direct access to materials always just in the right place. Modularity creates flexibility. Ergonomics and individuality enhance productivity. Modularity Flexibility Ergonomics Individuality Productivity 541

Ergonomics bott optimises working conditions, not least for health reasons. Ergonomic aspects play a key role.

The quality of the work environment, soundscape, lighting levels and of course the way a workplace is configured in all

A properly planned workplace is conducive to staff health and wellbeing, and the high costs of occupational accidents

The employees' radius of action is increased and their performance potential is enhanced, strengthening their motivation.

The whole focus of bott's modular system is on optimum flexibility and individuality, allowing it to be adapted quickly

Height adjustable desks and benches, elements that can be tilted, turned and swivelled, a small-pitch grid within which

7 Ergonomics bott optimises working conditions, not least for health reasons. Ergonomic aspects play a key role. There are many factors which affect an employee's sense of wellbeing at the workplace. The quality of the work environment, soundscape, lighting levels and of course the way a workplace is configured in all its different details. A properly planned workplace is conducive to staff health and wellbeing, and the high costs of occupational accidents and medical treatment can often be 'designed out'. The employees' radius of action is increased and their performance potential is enhanced, strengthening their motivation. So there are many ways in which it makes sense to adopt the latest approaches to modern workplace design. The whole focus of bott's modular system is on optimum flexibility and individuality, allowing it to be adapted quickly and easily to any size of individual sitting and/or standing. Height adjustable desks and benches, elements that can be tilted, turned and swivelled, a small-pitch grid within which to mount and position accessories or tools and optimised material storage and retrieval will all ensure natural, ergonomic movement with no extraneous 'detours'. Finally, integrated lighting and power supply modules complete the package. Everything is in the operative's field of vision, within easy reach but without stretching and with the essential legroom at sitting workstations

ESD From conductive ESD mats to total professional

With ESD workstations, preventing electrostatic discharge

Hardware requirements vary widely, ranging from the simple

And bott has the full range to satisfy your specific needs.

with earthing boxes and wrist straps that can be connected

8 ESD From conductive ESD mats to total professional protection. With ESD workstations, preventing electrostatic discharge is absolutely vital. Hardware requirements vary widely, ranging from the simple ESD mat right through to entire ESD-protected workstations. And bott has the full range to satisfy your specific needs. Professional ESD protection with fully conductive worktops, with earthing boxes and wrist straps that can be connected to a central earth terminal, conductive powder-coating and plastic bins, not to mention the complete conductive aluminium products in the Chipline range. 543

9 Single s bott single workstations meet every requirement when it comes to ergonomics, flexibility, modularity and functionality

A system with lots of practical features With three different ways

environment and to ergonomic requirements.

and retrieval of assembly materials, aids and tools.

section steel permit the use of a wide range of accessories that can

10 A system with lots of practical features With three different ways of adjusting the height, the benches adapt perfectly to their environment and to ergonomic requirements. The modular design allows different assembly and work stations to be connected and combined as required. Standardised components permit convenient and ergonomic access to and retrieval of assembly materials, aids and tools. Features such as the all-metal base unit and generously dimensioned legs guarantee total stability. Optional mount-on bench-top and overhead frames made from robust section steel permit the use of a wide range of accessories that can be positioned within easy ergonomic reach at just the right height. The correct lighting can also be incorporated for every conceivable job - naturally. Planning and Building a Single 545

11 Single s Main System Components Frame Reinforcement frame C-section stringer (pair) Leg pair "fixed" Cross member Connection member 546

12 Single s Basic Modules with Rear Frame Fixed Height Basic module made from sheet steel Incl. frame, reinforcement frame, C-section stringer (pair) and cross member Fixed 770 working height when using a 30 thick standard worktop 4 adjustable feet to deal with uneven floors Suitable for worktops of depth, 750 and 900* Maximum UDL: 200 kg For worktop width / 1800 Frame System width 815 APS-EP-1 FH APS-EP-2 FH APS-EP-3 FH APS-EP-4 FH APS-EP-5 FH Info *Foot extension required with worktop depth 900 ( ). Height Adjustment by Detent Pin Basic module made from sheet steel (pair) and cross member Incl. frame, reinforcement frame, C-section stringer Working height adjusts from 770 to 1050 (at 25 intervals) when using a 30 thick standard worktop 4 adjustable feet to deal with uneven floors Suitable for worktops of depth, 750 and 900* Maximum UDL: 200 kg Info For worktop width / 1800 Frame System width 815 APS-EP-11 RB APS-EP-12 RB APS-EP-13 RB APS-EP-14 RB APS-EP-15 RB *Foot extension required with worktop depth 900 ( ). Info Worktops - see pages

Single s Basic Modules with Rear Frame Height Adjustment by Hand Crank Height Adjustment with Electric Motor Aluminium legs and guides End covers made from sheet steel Incl.

13 Single s Basic Modules with Rear Frame Height Adjustment by Hand Crank Height Adjustment with Electric Motor Aluminium legs and guides End covers made from sheet steel Incl. frame, reinforcement frame, C-section stringer (pair) and cross member Infinitely adjustable working height von when using a 30 thick worktop Height adjustment with 2 hydraulic cylinders and hydraulic pump with foldaway hand crank 4 adjustable feet to deal with uneven floors Suitable for worktops with depth and 750 (depth 900 can be configured from individual parts) Maximum UDL: 200 kg Colour: Leg and leg elements anodised aluminium Sheet steel parts light grey For worktop width / 1800 Aluminium legs and guides End covers made from sheet steel Frame System width 815 APS-EP-21 HK APS-EP-22 HK APS-EP-23 HK APS-EP-24 HK APS-EP-25 HK Incl. frame, reinforcement frame, C-section stringer (pair) and cross member Infinitely adjustable working height from when using a 30 thick worktop Height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) 4 adjustable feet to deal with uneven floors Suitable for worktops with depth and 750 (depth 900 can be configured from individual parts) Maximum UDL: 200 kg Colour: Leg and leg elements - anodised aluminium Sheet steel parts - light grey Supplied ready assembled Supplied ready assembled Info Worktops - see pages For worktop width / 1800 Frame System width 815 APS-EP-31 EM APS-EP-32 EM APS-EP-33 EM APS-EP-34 EM APS-EP-35 EM

Single s Parts Leg pair - fixed height Incl. 4 adjustable feet to deal with uneven floors Leg assembly pair - height adjustable with detent pin Incl.

16 Suspended cabinets B3, B4, S2, S4 cannot be fitted in conjunction with the "fixed" leg assembly pair combined with worktops of depth.

14 Single s Parts Leg pair - fixed height Incl. 4 adjustable feet to deal with uneven floors Leg assembly pair - height adjustable with detent pin Incl. 4 adjustable feet to deal with uneven floors Order multiple: 1 pair Adjustable in 25 steps Order multiple: 1 pair Suspended cabinets B3, B4, S2, S4 cannot be fitted in conjunction with the "fixed" leg assembly pair combined with worktops of depth. Suspended cabinets B3, B4, S2 and S4 can be fitted with worktop depths 750 and 900. Leg assembly pair height adjustable with hand crank Suspended cabinets B3, B4, S2, S4 cannot be fitted in conjunction with the "height adjustable" leg assembly pair combined with worktops of depth. suspended cabinets B3, B4, S2 and S4 can be fitted with worktop depths 750 and 900. Leg assembly pair height adjustable with electric motor* Section Aluminium section Anodised aluminium legs and guide elements Infinitely height adjustable from when using a 30 thick worktop End panels: light grey For worktop depth / Section Anodised aluminium legs and guide elements Infinitely height adjustable from when using a 30 thick worktop End panels: light grey 3 m power cord with Schuko plug* For worktop depth / Aluminium section * Country-specific versions on request. Frame rated on both sides in 50 pitch Fits on the base frames of single workstations To mount the APS range of accessories Made from sheet steel System width W x D x H Usable height x 70 x x 70 x x 70 x

Single s Parts Reinforcement frame C-section stringer (pair) To mount on leg pair for single workstations Made from sheet steel For worktop W W x D x H 1000 940 x 45 x 300 119 03 129.

15 Single s Parts Reinforcement frame C-section stringer (pair) To mount on leg pair for single workstations Made from sheet steel For worktop W W x D x H x 45 x x 45 x / x 45 x To take suspended cabinets Mounted on the worktop Made from sheet steel For worktop W W x D x H x 40 x x 40 x / x 40 x Cross member Connection member Mounted between the leg pair Made from sheet steel For mounting the insertable footrest Increases lateral workbench stability Mounted between the leg pair Made from sheet steel For worktop W W x D x H x 40 x x 40 x / x 40 x For worktop W W x D x H x 40 x x 40 x / x 40 x

Single s Parts Insertable Footrest Freestanding Footrest Inserted into connection member Angle can be adjusted from 0 to 20 Lever fixes footrest at desired angle With slip-resistant ribbed rubber mat

16 Single s Parts Insertable Footrest Freestanding Footrest Inserted into connection member Angle can be adjusted from 0 to 20 Lever fixes footrest at desired angle With slip-resistant ribbed rubber mat Made from sheet steel Angle can be adjusted from 0 to 20 Lever fixes footrest at desired angle With slip-resistant ribbed rubber mat Angle W x D x H 4 adjustable feet Support area adjustable from in 25 steps ESD version: conductive surface and earth lead Angle W x D x H x 350 x x 440 x ESD x 350 x ESD x 440 x Foot extension (pair) To fit on leg pairs fixed height and height adjustable with detent pin Improves stability For use with worktops 900 deep Made from sheet steel W x D x H 70 x 300 x

Single s Single s with Rear Frame and Worktop Height adjustable with detent pin Self assembly Supplied ready assembled Basic module made from sheet steel Incl.

17 Single s Single s with Rear Frame and Worktop Height adjustable with detent pin Self assembly Supplied ready assembled Basic module made from sheet steel Incl. frame, reinforcement frame, C-section stringer (pair) and cross member Fixed working heights adjustable from 770 to 1050 at 25 intervals 4 adjustable feet to deal with uneven floors Suitable for worktops of depth and 750 Worktop melamine faced Maximum UDL: 200 kg Worktop W x D 1500 x Frame System width 1235 RB V 1500 x RB V 1500 x RB V Worktop W x D 1500 x Frame System width 1235 RB V 1500 x RB V 1500 x RB V Self assembly Aluminium legs and guides End covers made from sheet steel Incl. frame, reinforcement frame, C-section stringer (pair) and cross member Infinitely variable working height adjustment from Height adjustment with 2 hydraulic cylinders and hydraulic pump with foldaway hand crank 4 adjustable feet to deal with uneven floors Suitable for worktops of depth and 750 Worktop melamine faced Maximum UDL: 200 kg Colour: Leg and leg elements - anodised aluminium Sheet steel parts - light grey Supplied ready assembled Worktop W x D 1500 x Frame System width 1235 RB V 1500 x RB V 1500 x RB V 552

Single s Single s with Rear Frame and Worktop Height adjustable with electric motor Aluminium legs and guides End covers made from sheet steel Incl.

18 Single s Single s with Rear Frame and Worktop Height adjustable with electric motor Aluminium legs and guides End covers made from sheet steel Incl. frame, reinforcement frame, C-section stringer (pair) and cross member Infinitely adjustable working height from when using a 30 thick worktop Height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) 4 adjustable feet to deal with uneven floors Suitable for worktops of depth and 750 Worktop melamine faced Maximum UDL: 200 kg Colour: Leg and leg elements - anodised aluminium Sheet steel parts - light grey Worktop W x D 1500 x Frame System width Supplied ready assembled 1235 EM V 1500 x EM V 1500 x EM V 553

19 Single s Worktops Melamine faced Core material: Chipboard Top surface: Melamine faced to DIN Bottom surface: Melamine faced to DIN Edges: 3 ABS edges antistatic, rounded radius R3 Colour: light grey Surface data: Melamine laminated to DIN Partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) 30 thick Width Depth thick Width Depth Melamine faced ESD For electrostatically sensitive components Core material: Conductive chipboard Top surface: Conductive melamine faced to DIN Bottom surface: Conductive melamine faced to DIN Edges: 3 ABS edges antistatic, rounded radius R3 Colour: light grey Surface data: Partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) Leakage values: according to IEC thick 30 thick Width Depth Width Depth

resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis 30 thick Width 1000 1200 Depth 112 01 169.02 750 112 01 271.02 112 01 167.

20 Single s Worktops Laminate faced Core material: Chipboard Top surface: HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: 3 ABS edges antistatic, rounded radius R3 Colour: light grey Surface data: High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis 30 thick Width Depth thick Width Depth Laminate faced rounded front edge Core material: Chipboard Top surface: HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: 3 thick ABS edges, antistatic, rounded front edge Colour: light grey Surface data: High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis 30 thick 30 thick Width Depth Width Depth

21 Single s Worktops Laminate faced ESD For electrostatically sensitive components Core material: Conductive chipboard Top surface: Conductive HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: 3 ABS edges antistatic, rounded radius R3 Colour: light grey Surface data: High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Leakage values: according to IEC thick Width Depth thick Width Depth Laminate faced ESD rounded front edge For electrostatically sensitive components Core material: Conductive chipboard Top surface: Conductive HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: 3 thick ABS edges, antistatic, rounded front edge Colour: light grey Surface data: High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Leakage values: according to IEC thick 30 thick Width Depth Width Depth

22 Single s Worktops Beech multiplex Material: Beech multiplex board Top surface: oiled Bottom surface: oiled Colour: Natural beech Bonding: Laminated bi-directionally bonded beech veneers, bonding resistant in rooms with high humidity and occasional contact with water (IW 67) Grade: II / III to DIN Part 2 30 thick Width Depth thick Width Depth Solid Beech Material: Solid beech Top surface: 2 coats of polyurethane varnish Bottom surface: 1 coat of polyurethane varnish Colour: Natural beech Data: Surface resistant to water, oils, acids and chemicals, dovetailed joints for high load capacity 30 thick 30 thick Width Depth Width Depth

23 Multiple bott multiple workstation systems connect a number of workstations quickly and easily to form assembly lines

A robust, highly flexible and economical system Saves components when add-on modules are

offers options for assembly on both sides.

rear. The extremely robust metal frame makes the system so flexible that it can be

Inserting and removing conveyor sections or buffer zones, altering working heights and

24 A robust, highly flexible and economical system Saves components when add-on modules are used. The tough modular construction, with units which the user can combine at will, also offers options for assembly on both sides. Up to 40% of procurement costs can be saved if the same assembly line is attached at the rear. The extremely robust metal frame makes the system so flexible that it can be re-configured to suit changed requirements at any time. Inserting and removing conveyor sections or buffer zones, altering working heights and fitting and removing accessories are quick and easy tasks. The standardised modules are rapidly assembled and can be re-used as often as needed. Typical configurations for multiple workstation systems 559

25 Multiple Parts Frame Upright Bracket pair C-section stringer (pair) strut Rear foot (short) Cross member Front foot (long) 560

Multiple Starter Modules single sided 1x frame 2x foot (long) 2x foot (short) 1x bracket pair 1x C-section stringer (pair) 2x upright Infinitely adjustable working height and over (without

26 Multiple Starter Modules single sided 1x frame 2x foot (long) 2x foot (short) 1x bracket pair 1x C-section stringer (pair) 2x upright Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T 772 x 635 x x 750 x x 635 x x 750 x x 635 x x 750 x 30 Frame System width APS-AMP-1 APS-AMP-4 APS-AMP-2 APS-AMP-5 APS-AMP-3 APS-AMP double sided 1x frame 4x foot (long) 2x bracket pair 2x C-section stringer (pair) 2x upright Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T 772 x 635 x 30 (2x) 772 x 750 x 30 (2x) 957 x 635 x 30 (2x) 957 x 750 x 30 (2x) 1192 x 635 x 30 (2x) 1192 x 750 x 30 (2x) Frame System width APS-AMP- 7 APS-AMP-10 APS-AMP- 8 APS-AMP-11 APS-AMP- 9 APS-AMP

Multiple Add-on Modules single sided 1x frame 1x foot (long) 1x foot (short) 1x central bracket 1x C-section stringer (pair) Infinitely adjustable working height and over (without workstation strut),

635 x 30 772 x 750 x 30 957 x 635 x 30 957 x 750 x 30 1192 x 635 x 30 1192 x 750 x 30 Frame System width 815 1000 1235 APS-EMP-1 APS-EMP-4 APS-EMP-2 APS-EMP-5 APS-EMP-3 APS-EMP-6 110 32 050.

27 Multiple Add-on Modules single sided 1x frame 1x foot (long) 1x foot (short) 1x central bracket 1x C-section stringer (pair) Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T 772 x 635 x x 750 x x 635 x x 750 x x 635 x x 750 x 30 Frame System width APS-EMP-1 APS-EMP-4 APS-EMP-2 APS-EMP-5 APS-EMP-3 APS-EMP double sided 1x frame 2x foot (long) 2x central bracket 2x C-section stringer (pair) Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T 772 x 635 x 30 (2x) 772 x 750 x 30 (2x) 957 x 635 x 30 (2x) 957 x 750 x 30 (2x) 1192 x 635 x 30 (2x) 1192 x 750 x 30 (2x) Frame System width APS-EMP- 7 APS-EMP-10 APS-EMP- 8 APS-EMP-11 APS-EMP- 9 APS-EMP

Multiple Starter Modules single sided double frame 2x frame 2x foot (long) 4x foot (short) 1x bracket pair 1x central bracket for continuous worktop, 2x C-section stringer (pair) 2x upright

(with workstation strut) Made from sheet steel For worktop W x D x T 1587 x 635 x 30 1587 x 750 x 30 1957 x 635 x 30 1957 x 750 x 30 Frame System width 2 x 815 2 x 1000 APS-AMP-13 APS-AMP-17

28 Multiple Starter Modules single sided double frame 2x frame 2x foot (long) 4x foot (short) 1x bracket pair 1x central bracket for continuous worktop, 2x C-section stringer (pair) 2x upright Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T 1587 x 635 x x 750 x x 635 x x 750 x 30 Frame System width 2 x x 1000 APS-AMP-13 APS-AMP-17 APS-AMP-15 APS-AMP double sided double frame 2x frame 4x foot (long) 2x foot (short), 2x bracket pair 2x central bracket for continuous worktop, 4x C-section stringer (pair) 2x upright Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T Frame System width 1587 x 635 x 30 (2x) 1587 x 750 x 30 (2x) 1957 x 635 x 30 (2x) 1957 x 750 x 30 (2x) 2 x x 1000 APS-AMP-14 APS-AMP-18 APS-AMP-16 APS-AMP

Multiple Add-on Modules single sided double frame 2x frame 1x foot (long) 3x foot (short) 1x central bracket 1x central bracket for continuous worktop 2x C-section stringer (pair) Infinitely

workstation strut) Made from sheet steel For worktop W x D x T 1587 x 635 x 30 1587 x 750 x 30 1957 x 635 x 30 1957 x 750 x 30 Frame System width 2 x 815 2 x 1000 APS-EMP-13 APS-EMP-17 APS-EMP-15

29 Multiple Add-on Modules single sided double frame 2x frame 1x foot (long) 3x foot (short) 1x central bracket 1x central bracket for continuous worktop 2x C-section stringer (pair) Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T 1587 x 635 x x 750 x x 635 x x 750 x 30 Frame System width 2 x x 1000 APS-EMP-13 APS-EMP-17 APS-EMP-15 APS-EMP double sided double frame 2x frame 2x foot (long) 2x foot (short) 2x central bracket 2x central bracket for continuous worktop 4x C-section stringer (pair) Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For worktop W x D x T Frame System width 1587 x 635 x 30 (2x) 1587 x 750 x 30 (2x) 1957 x 635 x 30 (2x) 1957 x 750 x 30 (2x) 2 x x 1000 APS-EMP-14 APS-EMP-18 APS-EMP-16 APS-EMP

Multiple Add-on Module for use with "starter module single sided" Corner L 2x frame 815 1x foot (long) 1x foot (short) 1x central bracket 1x corner upright type L 1x stabiliser angle Infinitely

workstation strut Made from sheet steel For corner worktop system size 635 750 Frame System width 815 APS-EMP-21 APS-EMP-22 110 32 070.16 110 32 071.

30 Multiple Add-on Module for use with "starter module single sided" Corner L 2x frame 815 1x foot (long) 1x foot (short) 1x central bracket 1x corner upright type L 1x stabiliser angle Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation with workstation strut Made from sheet steel For corner worktop system size Frame System width 815 APS-EMP-21 APS-EMP Add-on Module for use with "starter module double sided" Corner T 3x frame 815 2x foot (long) 2x central bracket 1x upright 1x corner upright type T 2x stabiliser angles Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation (with workstation strut) Made from sheet steel For corner worktop system size 635 (2x) 750 (2x) Frame System width 815 APS-EMP-23 APS-EMP

31 Multiple Add-on Module for use with "starter module double sided" Corner X 4x frame 815 6x foot (long) 2x central bracket 2x bracket pair 2x upright 1x corner upright type X 4x stabiliser angles Infinitely adjustable working height and over (without workstation strut), infinitely adjustable working height 730 and over (with workstation strut see page 569) Maximum UDL: 200 kg per workstation with workstation strut Made from sheet steel For corner worktop system size 635 (4x) 750 (4x) Frame System width 815 APS-EM-25 APS-EM

32 Multiple Parts Frame rated on both sides in 50 pitch Supports all the parts required for the multiple workstation systems To mount the APS range of accessories Made from sheet steel System width W x D x H x 70 x x 70 x x 70 x Upright Corner upright L For mounting on the frame Completes the section channel at the beginning and end of a multiple workstation system Made from sheet steel Height Allows the multiple workstation system to be configured as a corner variant Made from sheet steel Height Corner upright T Corner upright X Allows the multiple workstation system to be configured as a Tee variant Made from sheet steel Allows the multiple workstation system to be configured as an X variant Made from sheet steel Height Height

33 Multiple Parts Stabiliser angle Foot Provides extra stability for the corner variant As attachments for corner ball mat and corner worktop Made from sheet steel For mounting on the frame Made from sheet steel long (front) Depth short (rear) Cross member C-section stringer (pair) Fits between the feet Made from sheet steel To take suspended cabinets Mounted on the worktop Made from sheet steel W x D x H W x D x H 790 x 40 x x 40 x x 40 x x 40 x x 40 x x 40 x x 40 x x 40 x

34 Multiple Parts Bracket pair Central bracket (extension) For mounting on the frame To support the worktop at the beginning and end of a multiple workstation system Made from sheet steel For worktops depth Special bracket For mounting on the frame To support the worktop in multiple workstation systems To support the worktop when using the "double frame" system with continuous worktop Made from sheet steel Extension For worktops depth For continuous worktop strut For increased stability Made from sheet steel For transition between worktops and roller track The following is also required to fit the special bracket: Central bracket (: ) Made from sheet steel For worktops depth Height Adjustable for working height when used with worktops Adjustable for working height when used with roller tracks

35 Multiple Worktops Melamine faced Core material: Chipboard Top surface: Melamine faced to DIN Bottom surface: Melamine faced to DIN Edges: 3 ABS edges antistatic, rounded radius R3 Surface data: Melamine laminated to DIN Partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) 30 thick System width Width Depth x x Corner worktop system size Width 852 Depth

36 Multiple Worktops Melamine faced ESD For electrostatically sensitive components Core material: Conductive chipboard Top surface: Conductive melamine faced to DIN Bottom surface: Conductive melamine faced to DIN Edges: 3 ABS edges antistatic, rounded radius R3 Colour: light grey Surface data: Melamine facing is partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) Leakage values: according to IEC thick System width Width Depth x x Corner worktop system size Width 852 Depth

37 Multiple Worktops Laminate faced Core material: Chipboard Top surface: HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: 3 ABS edges antistatic, rounded radius R3 Colour: light grey Surface data: High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis 30 thick System width Width Depth x x Corner worktop system size Width 852 Depth

38 Multiple Worktops Laminate faced ESD For electrostatically sensitive components Core material: Conductive chipboard Top surface: Conductive HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: 3 ABS edges antistatic, rounded radius R3 Colour: light grey Surface data: High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Leakage values: according to IEC thick System width Width Depth x x Corner worktop system size Width 852 Depth

Multiple Worktops Beech multiplex Material: Beech multiplex board Top surface: oiled Bottom surface: oiled Colour: Natural beech Bonding: Laminated bi-directionally bonded beech veneers, bonding

39 Multiple Worktops Beech multiplex Material: Beech multiplex board Top surface: oiled Bottom surface: oiled Colour: Natural beech Bonding: Laminated bi-directionally bonded beech veneers, bonding resistant in rooms with high humidity and occasional contact with water (IW 67) Grade: II / III to DIN Part 2 30 thick System width Width Depth x x Corner worktop system size Width 852 Depth

Multiple Worktops Solid Beech Material: Top surface: Bottom surface: Colour: Surface data: Solid beech 2 coats of polyurethane varnish 1 coat of polyurethane varnish Natural beech Surface resistant

40 Multiple Worktops Solid Beech Material: Top surface: Bottom surface: Colour: Surface data: Solid beech 2 coats of polyurethane varnish 1 coat of polyurethane varnish Natural beech Surface resistant to water, oils, acids and chemicals, dovetailed joints for high load capacity 30 thick System width Width Depth x x Corner worktop system size Width 852 Depth

41 Assembly Lines Modern assembly lines from bott are flexible and can be rapidly adapted to suit new operations and processes. Customised production lines with system The modular construction means that units can be combined exactly as the user requires; it also allows the workflow to change direction. The roller track keeps processes flowing smoothly at exactly the right place

42 Assembly Lines Parts Frame Upright Corner ball mat Ball transfer rail Ball mat 815 End stop Roller track Bracket Side guide strut Rear foot (short) Cross member Front foot (long) 577

Assembly Lines Starter Modules single sided double sided 1x frame 2x foot (long) 2x foot (short) 1x bracket pair 1x roller track pair 2x end stop 2x upright 1x side guide pair Infinitely adjustable

workstation struts Made from sheet steel Frame / System Width Castors 815 APS-AML-1 110 32 080.16 1000 red APS-AML-2 110 32 081.16 1235 APS-AML-3 110 32 082.16 ESD 815 APS-AML-51 ESD 110 32 118.

43 Assembly Lines Starter Modules single sided double sided 1x frame 2x foot (long) 2x foot (short) 1x bracket pair 1x roller track pair 2x end stop 2x upright 1x side guide pair Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts Made from sheet steel Frame / System Width Castors 815 APS-AML red APS-AML APS-AML ESD 815 APS-AML-51 ESD black APS-AML-52 ESD APS-AML-53 ESD x frame 2x upright 4x foot (long) 2x bracket pair 2x roller track pair 2x side guide pair 4x end stop Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts Made from sheet steel Frame / System Width Castors 815 APS-AML red APS-AML APS-AML ESD 815 APS-AML-54 ESD black APS-AML-55 ESD APS-AML-56 ESD

Assembly Lines Add-on Modules single sided double sided 1x frame 1x foot (long) 1x foot (short) 1x bracket left 1x roller track pair 1x side guide pair Infinitely adjustable working height 650 and

sheet steel Frame / System Width Castors 815 APS-EML-1 110 32 087.16 1000 red APS-EML-2 110 32 088.16 1235 APS-EML-3 110 32 089.16 ESD 815 APS-EML-51 ESD 110 32 125.

44 Assembly Lines Add-on Modules single sided double sided 1x frame 1x foot (long) 1x foot (short) 1x bracket left 1x roller track pair 1x side guide pair Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts Made from sheet steel Frame / System Width Castors 815 APS-EML red APS-EML APS-EML ESD 815 APS-EML-51 ESD black APS-EML-52 ESD APS-EML-53 ESD x frame 2x foot (long) 2x bracket left 2x roller track pair 2x side guide pair Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts Made from sheet steel Frame / System Width Castors 815 APS-EML red APS-EML APS-EML ESD 815 APS-EML-54 ESD black APS-EML-55 ESD APS-EML-56 ESD

Assembly Lines Starter Modules Double Sided Ball Mat 1x frame 815 4x foot (long) 2x upright 2x bracket pair 2x ball mat 1x side guide pair 4x end stop 1x ball transfer rail Infinitely adjustable

workstation struts For workpiece carriers 450 x 450 and x (300 x 300 on request) Made from sheet steel Frame / System Width Balls 815 White polyamide APS-AML-7 110 32 086.

45 Assembly Lines Starter Modules Double Sided Ball Mat 1x frame 815 4x foot (long) 2x upright 2x bracket pair 2x ball mat 1x side guide pair 4x end stop 1x ball transfer rail Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts For workpiece carriers 450 x 450 and x (300 x 300 on request) Made from sheet steel Frame / System Width Balls 815 White polyamide APS-AML ESD 815 Steel APS-AML-57-ESD Add-on Modules Double Sided Ball Mat 1x frame 2x foot (long) 2x bracket left 2x ball mat 1x side guide pair 1x ball transfer rail Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts For workpiece carriers 450 x 450 and x (300 x 300 on request) Made from sheet steel Frame / System Width Balls 815 White polyamide APS-EML ESD 815 Steel APS-EML-57 ESD

Assembly Lines Add-on Modules for use with "starter module - single sided" Angle L Ball Mat 2x frame 815 1x foot (long) 1x foot (short) 1x bracket left 1x corner ball mat 1x corner upright type L 1x

workpiece carriers 450 x 450 and x (300 x 300 on request) Maximum UDL: 150 kg/m in conjunction with workstation struts Made from sheet steel Frame / System Width Balls 815 White polyamide APS-EML-8

46 Assembly Lines Add-on Modules for use with "starter module - single sided" Angle L Ball Mat 2x frame 815 1x foot (long) 1x foot (short) 1x bracket left 1x corner ball mat 1x corner upright type L 1x stabiliser angle Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) For workpiece carriers 450 x 450 and x (300 x 300 on request) Maximum UDL: 150 kg/m in conjunction with workstation struts Made from sheet steel Frame / System Width Balls 815 White polyamide APS-EML ESD 815 Steel APS-EML-58 ESD Add-on Modules for use with "starter module double sided" Angle T Ball Mat 3x frame 815 2x foot (long) 1x bracket pair 2x corner ball mat 1x ball transfer rail 1x upright 1x corner upright type T 2x stabiliser angles Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts For workpiece carriers 450 x 450 and x (300 x 300 on request) Made from sheet steel Frame / System Width 815 Balls White polyamide 815 Steel APS-EML ESD APS-EML-59 ESD

Assembly Lines Add-on Modules for use with "starter module double sided" Angle X Ball Mat 4x frame 815 6x foot (long) 3x bracket pair 4x corner ball mat 4x ball transfer rail 4x end stop 2x upright

47 Assembly Lines Add-on Modules for use with "starter module double sided" Angle X Ball Mat 4x frame 815 6x foot (long) 3x bracket pair 4x corner ball mat 4x ball transfer rail 4x end stop 2x upright 1x corner upright type X 4x stabiliser angles Infinitely adjustable working height 650 and over (without workstation strut), infinitely adjustable working height and over (with workstation strut see page 585) Maximum UDL: 150 kg/m in conjunction with workstation struts For workpiece carriers 450 x 450 and x (300 x 300 on request) Made from sheet steel Frame / System Width 815 Balls White polyamide 815 Steel APS-EML ESD APS-EML-60 ESD

Assembly Lines Parts Frame rated on both sides in 50 pitch Fits on the base frames of single workstations Supports all the parts required for the multiple workstation systems To mount the APS range

48 Assembly Lines Parts Frame rated on both sides in 50 pitch Fits on the base frames of single workstations Supports all the parts required for the multiple workstation systems To mount the APS range of accessories Made from sheet steel System width W x D x H x 70 x x 70 x x 70 x Upright Corner upright L For mounting on the frame Completes the section channel at the beginning and end of a multiple workstation system Made from sheet steel Height Allows the multiple workstation system to be configured as a corner variant Made from sheet steel Height Corner upright T Corner upright X Allows the multiple workstation system to be configured as a Tee variant Made from sheet steel Allows the multiple workstation system to be configured as an X variant Made from sheet steel Height Height

Assembly Lines Parts Stabiliser angle Roller track pair Provides extra stability for the corner variant As attachments for corner ball mat and corner worktop Made from sheet steel 080 13 243.

49 Assembly Lines Parts Stabiliser angle Roller track pair Provides extra stability for the corner variant As attachments for corner ball mat and corner worktop Made from sheet steel Mounted on brackets For conveying workpieces Material: POM (Polyoxymethylene) Colour: Steel body, light grey Red or black rollers (ESD) System size 815 W x D x H 815 x 75 x 40/ x 75 x 40/ x 75 x 40/ ESD x 75 x 40/ x 75 x 40/ x 75 x 40/ Side guide pair System size W x D x H Mounted on the roller track For the lateral guidance of the workpieces Made from stainless steel End stop Mounted on brackets Terminates the assembly line at beginning and end Made from sheet steel x 10 x WST T x 10 x x 10 x Corner ball mat Ball mat WST T WST T Mounted on brackets Allows the workpiece to be turned within a corner configuration Colour:Steel body, light grey Nylon or steel balls (ESD) WST T WST T 450 / ESD WST T WST T 450 / Mounted on brackets Allows the transfer of a workpiece from front to rear assembly line in the "double sided" version Colour:Steel body, light grey Nylon or steel balls (ESD) W x D x H 815 x 625 x ESD 815 x 625 x

Assembly Lines Parts Ball transfer rail Foot Mounted inside the double sided version Covers the space between two ball mats Colour:Steel body, light grey Nylon or steel balls (ESD) W x D x H 775 x

50 Assembly Lines Parts Ball transfer rail Foot Mounted inside the double sided version Covers the space between two ball mats Colour:Steel body, light grey Nylon or steel balls (ESD) W x D x H 775 x 110 x ESD 775 x 110 x For mounting on the frame Made from sheet steel Depth long (front) short (rear) Cross member Brackets Fits between the feet Made from sheet steel System size 815 W x D x H 790 x 40 x x 40 x x 40 x For mounting on the frame To support roller tracks Made from sheet steel Bracket pair for roller tracks Bracket left Bracket right Outfeed kit Height adjustable workstation strut To connect roller tracks Angles from sheet steel For increased stability Made from sheet steel Height Adjustable for working height when used with worktops Adjustable for working height when used with roller tracks

51 Handling Lines Whether you are conveying, buffering or assembling, bott handling lines can be configured exactly to your requirements

52 The building-block principle means that handling lines can adapt rapidly to changing work patterns at any time and using existing elements.the modular design with units that can be combined as the user requires also allows the workflow to change direction. The roller track ensures that processes flow smoothly, and that work arrives at the right place at the right time. Here again, the robust metal base frame proves it worth by making it so easy to insert and remove conveyor sections or buffer zones, to change working heights and to fit and remove accessories such as cabinets, swivel arms, sliding shelves or workpiece carrier stops. 587

53 Handling Lines Parts Ball transfer rail Corner ball mat Ball mat 815 End stop Side guide pair Roller track pair Stringer Roller track leg 588

Handling Lines Starter Modules 2x roller track leg 2x stringer 1x roller track pair 1x side guide pair 2x end stop Working height adjustable from 760-1010 ESD version: Conductive rollers (black)

54 Handling Lines Starter Modules 2x roller track leg 2x stringer 1x roller track pair 1x side guide pair 2x end stop Working height adjustable from ESD version: Conductive rollers (black) Maximum UDL: 150 kg/m System width Workpiece carrier Depth Made from sheet steel Castors red red APS-ATL-1 APS-ATL-2 APS-ATL-3 APS-ATL-4 APS-ATL APS-ATL APS-ATL red APS-ATL-8 APS-ATL-9 APS-ATL-51 ESD ESD black black APS-ATL-52 ESD APS-ATL-53 ESD APS-ATL-54 ESD APS-ATL-55 ESD APS-ATL-56 ESD APS-ATL-57 ESD black APS-ATL-58 ESD APS-ATL-59 ESD ** Colour information - see cover 589

Handling Lines Add-on Modules 1x roller track leg 2x stringer 1x roller track pair 1x side guide pair Working height adjustable from 760-1010 ESD version: Conductive rollers (black) Maximum UDL: 150

55 Handling Lines Add-on Modules 1x roller track leg 2x stringer 1x roller track pair 1x side guide pair Working height adjustable from ESD version: Conductive rollers (black) Maximum UDL: 150 kg/m Made from sheet steel System width Workpiece carrier Depth Castors red red APS-ETL-1 APS-ETL-2 APS-ETL-3 APS-ETL-4 APS-ETL APS-ETL APS-ETL red APS-ETL-8 APS-ETL-9 APS-ETL-60 ESD ESD black black APS-ETL-61 ESD APS-ETL-62 ESD APS-ETL-63 ESD APS-ETL-64 ESD APS-ETL-65 ESD APS-ETL-66 ESD black APS-ETL-67 ESD APS-ETL-68 ESD

Handling Lines Parts Roller track leg To support the roller tracks Stringer Connects the roller track legs Made from sheet steel Made from sheet steel For workpiece carriers of depth 300 W x D x H 80

16 1000 1035 x 20 x 115 080 13 245.16 1235 1270 x 20 x 115 080 13 246.

56 Handling Lines Parts Roller track leg To support the roller tracks Stringer Connects the roller track legs Made from sheet steel Made from sheet steel For workpiece carriers of depth 300 W x D x H 80 x 325 x x 475 x x 625 x x 695 x System width 815 W x D x H 850 x 20 x x 20 x x 20 x Roller track pair Side guide pair Mounted on brackets For conveying workpieces Material: POM (Polyoxymethylene) Steel body, light grey Red or black rollers (ESD) Mounted on the roller track For the lateral guidance of the workpieces Made from stainless steel System width 815 W x D x H 815 x 75 x 40/ x 75 x 40/ x 75 x 40/ ESD x 75 x 40/ x 75 x 40/ x 75 x 40/ System width 815 End stop W x D x H 815 x 10 x x 10 x x 10 x Terminates the assembly line at beginning and end Made from sheet steel For workpiece carriers of depth

57 Handling Lines Parts Corner ball mat Ball mat For mounting on roller track legs Allows the workpiece to be turned within a corner configuration Steel body, light grey Nylon or steel balls (ESD) For workpiece carriers of width x depth 300 x x x ESD 300 x x x For mounting on roller track legs Allows the transfer of a workpiece from front to rear assembly line in the "double sided" version Steel body, light grey Nylon or steel balls (ESD) System size W x D x H 815 x 625 x ESD 815 x 625 x Ball transfer rail Outfeed kit To connect roller tracks Angles from sheet steel Mounted inside the double sided version Covers the space between two ball mats Steel body, light grey Nylon or steel balls (ESD) W x D x H 775 x 110 x ESD 775 x 110 x

lines via easy customisation with accessories from the APS

58 for Assembly/Handling Lines Tools, small parts and accessories can all be accomodated on assembly and handling lines via easy customisation with accessories from the APS range, such as suspended cabinets or small parts storage channels. 593

for Assembly/Handling Lines Assembly kit for suspended cabinets To take suspended cabinets For mounting beneath roller track pair Made from sheet steel For workpiece carriers of depth 080 06 023.

16 Rear worktop Core material: Chipboard Top surface: Melamine faced to DIN 68765 Bottom surface: Melamine faced to DIN 68765 Edges: 3 ABS edges antistatic, rounded radius R3 Colour: Surface data:

59 for Assembly/Handling Lines Assembly kit for suspended cabinets To take suspended cabinets For mounting beneath roller track pair Made from sheet steel For workpiece carriers of depth Rear worktop Core material: Chipboard Top surface: Melamine faced to DIN Bottom surface: Melamine faced to DIN Edges: 3 ABS edges antistatic, rounded radius R3 Colour: Surface data: light grey Melamine laminated to DIN 68765, partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) System width W x D x T For workpiece carriers of depth x 290 x x 140 x x 290 x x 140 x x 290 x x 140 x

for Assembly/Handling Lines Workpiece carrier stop To mounting on roller track pair 1 piece, can be mounted left or right hand Workpiece carrier stop

60 for Assembly/Handling Lines Workpiece carrier stop To mounting on roller track pair 1 piece, can be mounted left or right hand Workpiece carrier stop Workpiece carrier stop with spring F For workpiece carriers of depth Universal support For mounting plastic bins size 2001 and 2002 (see page 512) Fitted in conjunction with the side guide for the roller track Made from sheet steel System width 815 W x D x T 790 x 20 x x 20 x x 20 x

for Assembly/Handling Lines Ball transfer insert For diverting workpieces out of the assembly/handling line Fitted between roller track pair Requires 2 additional ball transfer rails (see below)

61 for Assembly/Handling Lines Ball transfer insert For diverting workpieces out of the assembly/handling line Fitted between roller track pair Requires 2 additional ball transfer rails (see below) Nylon or steel balls (ESD) W x D x H For workpiece carriers of width x depth 300 x 175 x x x 325 x x x 475 x 40 x ESD 300 x 175 x x x 325 x x x 475 x 40 x Ball transfer rail Requires a ball transfer insert To fit the ball transfer rail, the rollers must be removed from the roller tracks in the areas affected For sideways diversion off the roller track Covers the space between two ball mats Conductive steel balls (ESD version) W x D x H For workpiece carriers of width x depth 300 x 65 x x 65 x x 65 x

for Assembly/Handling Lines Tray on roller track with ribbed rubber mat Tray can be laid on the roller track and

protection W x D x H For workpiece carriers of depth 320 x 300 x 20 300 025 33 211.

16 Tray in roller track with ribbed rubber mat Tray is laid in the roller track Workpiece carrier can move over

16 435 x 315 x 40 025 33 217.16 450 435 x 315 x 85 025 33 216.16 435 x 465 x 40 025 33 219.

62 for Assembly/Handling Lines Tray on roller track with ribbed rubber mat Tray can be laid on the roller track and moved like a workpiece carrier Brackets (supplied) allow tray to the mounted above the roller track Includes edge protection W x D x H For workpiece carriers of depth 320 x 300 x x 450 x x x Tray in roller track with ribbed rubber mat Tray is laid in the roller track Workpiece carrier can move over the tray For workpiece carriers of depth W x D x H 435 x 165 x x 165 x x 315 x x 315 x x 465 x x 465 x Small parts channel Incl. 4 small parts storage boxes 144 x 72 x 55 Fitted in conjunction with the side guide for the roller track Made from sheet steel W x D x H 580 x 75 x

FIFO Rack 1 " $ 13 9 8 /a 15 16 )a 2 8 $ /b 11 9 6 %!

System width W x D x H 6 5 6 1 Frame 815 815 x 70 x 1800 120 15 001.

63 FIFO Rack 1 " $ /a )a 2 8 $ /b %! Maximum UDL: 80 kg per level 7 Maximum UDL: 250 kg per bay Fig. System width W x D x H Frame x 70 x Frame x 70 x Frame x 70 x Upright Height Screw foot (inner) Screw foot (outer) Frame connection Roller track pair Roller track pair ESD roller track pair ESD roller track pair

64 FIFO Rack Fig. System width W x D x H 9 Inner roller track Inner ESD roller track Centre ESD roller track Centre ESD roller track Roller track brake ) Roller track stop 815 front ) Roller track stop 1000 front ) Roller track stop 1235 front ) Roller track stop 815 rear ) Roller track stop 1000 rear ) Roller track stop 1235 rear ) Roller track carrier 815 centre ) Roller track carrier 1000 centre ) Roller track carrier 1235 centre Roller track connector pair Adjustable metal shelf x Adjustable metal shelf x Adjustable metal shelf x Adjustable ESD metal shelf x Adjustable ESD metal shelf x Adjustable ESD metal shelf x Shelf mounting, left Shelf mounting, right a Centre holder, roller track stop b Left holder, roller track stop c Right holder, roller track stop a Mounting kit for roller track stop, double sided b Mounting kit for shelf, double sided c Mounting kit for shelf, singe sided a Support bracket, roller track stop b Support bracket, roller track stop (side extension) Support brackets or holders (item 17, 18 or 19) must be ordered separately for this. ESD version: Conductive rollers, conductive powder-coating and earthing lead 599

65 Because bott assembly trolleys are always exactly where they are needed, they are ideal aids in any production environment.

These highly flexible mobile helpers perfect the system bott assembly trolleys guarantee the flexible provision of material and small parts.

66 These highly flexible mobile helpers perfect the system bott assembly trolleys guarantee the flexible provision of material and small parts. They can take heavy loads and their dimensions fit the modular frame system. They are available as an ergonomic solution with constant levelling or height adjustable side trolley, and as a mobile store for small parts. The use of service trolleys cuts the setup time for an assembly line to a few minutes. systems are also the ideal aids for handling small batch sizes and individual products. 601

Constant Level Trolley for sitting workstations Loading area: W x D 400 suitable for Euroboxes (see page 288) Loading height: Load capacity: max. (evenly distributed) max.

Automatic tracking of the loading area by spring packs as individual boxes are removed ESD version: conductive powder-coating, conductive castors W x D x H 635 x 640 x 1200 110 34 005.

105 kg (evenly distributed) 4 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Balance force adjustable by removal of individual springs

67 Constant Level Trolley for sitting workstations Loading area: W x D 400 suitable for Euroboxes (see page 288) Loading height: Load capacity: max. (evenly distributed) max. 75 kg (evenly distributed) 4 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Balance force adjustable by removal of individual springs Automatic tracking of the loading area by spring packs as individual boxes are removed ESD version: conductive powder-coating, conductive castors W x D x H 635 x 640 x ESD 635 x 640 x for standing workstations Loading area: W x D 400 suitable for Euroboxes (see page 288) Loading height: max. 840 (evenly distributed) Load capacity: max. 105 kg (evenly distributed) 4 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Balance force adjustable by removal of individual springs Automatic tracking of the loading area by spring packs as individual boxes are removed ESD version: conductive powder-coating, conductive castors W x D x H 635 x 640 x ESD 635 x 640 x

conductive powder-coating, conductive castors System width W x D x H 815 855 x 675 x 1760 110 34 006.16 1000 1040 x 675 x 1760 110 34 008.

68 Component Parts Trolley double-sided use can be fitted on a 50 pitch Accepts all the accessories in the APS range Frame is mounted centrally 4 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Load capacity: 210 kg ESD version: conductive powder-coating, conductive castors System width W x D x H x 675 x x 675 x x 675 x ESD x 675 x x 675 x x 675 x

Back Access Trolley single-sided use For the supply of components to workstations from the rear Necessary clearance of the bottom stringer from workstations and assembly lines: 180 minimum 4 swivel

H 815 855 x 675 x 1760 110 34 003.16 1000 1040 x 675 x 1760 110 34 004.16 1235 1275 x 675 x 1760 110 34 007.16 ESD 815 855 x 675 x 1760 110 34 011.20 1000 1040 x 675 x 1760 110 34 012.

69 Back Access Trolley single-sided use For the supply of components to workstations from the rear Necessary clearance of the bottom stringer from workstations and assembly lines: 180 minimum 4 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Load capacity: 210 kg ESD version: conductive powder-coating, conductive castors System width W x D x H x 675 x x 675 x x 675 x ESD x 675 x x 675 x x 675 x Storage channel W x D x H lower 765 x 665 x lower 950 x 665 x lower 1185 x 665 x ESD lower 765 x 665 x lower 950 x 665 x lower 1185 x 665 x

Side Trolley height adjustable Infinitely adjustable working height from 770-1050 Secured by clamping levers 4 swivel castors of which 2 have brakes that block both the rolling and swivelling

20 Adjustable Worktables Worktops Width x Depth 665 x Thickness 30 Worktop finish Melamine faced 112 01 178.01 Melamine faced ESD 112 01 178.04 Laminate faced 112 01 178.

07 double-sided use Suitable for use with Euroboxes Ideal for picking and assembly operations Gas strut assisted height adjustment Rake adjustable from 0 to 20 Swivel castors, dia.

70 Side Trolley height adjustable Infinitely adjustable working height from Secured by clamping levers 4 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors ESD version: conductive powder-coating, conductive castors Frame W x D 560 x ESD 560 x Adjustable Worktables Worktops Width x Depth 665 x Thickness 30 Worktop finish Melamine faced Melamine faced ESD Laminate faced Laminate faced rounded front edge Laminate faced ESD Laminate faced rounded front edge ESD Multiplex Solid Beech double-sided use Suitable for use with Euroboxes Ideal for picking and assembly operations Gas strut assisted height adjustment Rake adjustable from 0 to 20 Swivel castors, dia. 75, ensures optimum stability and manoeuvrability Swivel castor brake (A = 2 off / B = 4 off) 20 front upstand B A Fig. Platform dimensions W x H Height Max. surface load Max. lifting capacity A 500 x kg 25 kg B 800 x kg 50 kg

Modular Packing Stations Developed from modular components, the range of bott workstation systems also offers solutions for packing departments.

71 Modular Packing Stations Developed from modular components, the range of bott workstation systems also offers solutions for packing departments. These special benches are adapted to APS system dimensions, and make use of the versatile APS accessories to create customised configurations. Equipped with cutting/triing knives, shelves and roll dispensers, these modular packing stations are suited to any task in the packing area

Modular Packing Stations Complete Variants Packing Station with

Worktop melamine faced 40, grey Modular rear frame, system width

hoops W x D x H 1500 x 900 x 840-990 1590-U 110 33 006.

16 Packing Station with Upper Roll Dispenser Working height

division hoops (Assembled image) W x D x H 1500 x 900 x 840-990

72 Modular Packing Stations Complete Variants Packing Station with Lower Roll Dispenser Working height adjustable from Worktop melamine faced 40, grey Modular rear frame, system width 1235 (Assembled image) Lower roll dispenser Shelf with 5 division hoops W x D x H 1500 x 900 x U x 900 x U Packing Station with Upper Roll Dispenser Working height adjustable from Worktop melamine faced 40, grey Modular rear frame, system width 1235 Upper roll dispenser Shelf with 5 division hoops (Assembled image) W x D x H 1500 x 900 x O x 900 x O

Modular Packing Stations Parts Packing table Height adjustable framework, colour: light

with 5 division hoops for collapsible bins Division hoops 250 apart W x D x H W x D x H

APS range of accessories Made from sheet steel Plastic clip Attaches to the modular rear

73 Modular Packing Stations Parts Packing table Height adjustable framework, colour: light grey Worktop melamine faced 40, grey Shelf with division hoops Laminated wooden surface with 5 division hoops for collapsible bins Division hoops 250 apart W x D x H W x D x H 1500 x 900 x x 900 x x 900 x Modular rear frame rated on both sides on a 50 pitch To mount on worktop To mount the APS range of accessories Made from sheet steel Plastic clip Attaches to the modular rear frame Holds the paper roll When using the cutting/triing knife and a roll dispenser lower and upper W x D x H 1275 x 70/150 x

Modular Packing Stations Individual Range and Cutting/triing knife With cutting wheel To mount on worktop Suitable for use with paper and board Cut/trim width max.

Cutting knife for plastic film 850 01 004 W x D x H 1275 x 100 x 160 070 02 058 Lower roll dispenser Dispenser shaft including brackets for attachment to the lower stringer

1000 without side stop 070 02 060.16 070 02 059.16 Side stop Conical side stops For fixing the position of the packing roll on the dispenser shaft O/M = 2 pieces Inside dia.

74 Modular Packing Stations Individual Range and Cutting/triing knife With cutting wheel To mount on worktop Suitable for use with paper and board Cut/trim width max Includes plastic clip to hold the packing material Cutting knife for plastic film Suitable for use with plastic film Use only in conjunction with cutting/triing knife Cutting knife for plastic film W x D x H 1275 x 100 x Lower roll dispenser Dispenser shaft including brackets for attachment to the lower stringer Roll width max Roll diameter: max. without side stop Upper roll dispenser Dispenser shaft including brackets for attachment to the modular rear frame Roll width max without side stop Side stop Conical side stops For fixing the position of the packing roll on the dispenser shaft O/M = 2 pieces Inside dia. of packing rolls: For fixing the position of the packing roll on the dispenser and centering it on the shaft O/M = 2 pieces Inside dia. of packing rolls:

75 A perfect arrangement of tools and materials can make all the difference to the efficient performance of a workstation. Factors such as clarity, ergonomics and flexibility often pose the biggest challenge for the workstation designer

The modular accessories for bott system workstations offer a comprehensive range of options for positioning all kinds of tools and resources around the operative.

76 The modular accessories for bott system workstations offer a comprehensive range of options for positioning all kinds of tools and resources around the operative. Info that are mounted on rear frames / overhead frames using brackets are height adjustable on a 25 or 50 pitch that are screwed to the frame are infinitely adjustable for height 611

Overhead Frames for basic modules To mount on mounting frame and rear frame Infinitely adjustable height Adjustable slide rail depth System width W x D x H Suitable for: Single workstations Starter

77 Overhead Frames for basic modules To mount on mounting frame and rear frame Infinitely adjustable height Adjustable slide rail depth System width W x D x H Suitable for: Single workstations Starter module of assembly and handling lines Mounting frames on workbenches Modular rear frame at modular packing stations Pair of stoppers included x 700 x x 700 x x 700 x For add-on modules 2 slide rails and 1 roller Infinitely adjustable height Adjustable slide rail depth Suitable for: Add-on module of multiple workstation systems and assembly lines Pair of stoppers included System width W x D x H x 700 x x 700 x x 700 x

Overhead Frames Parts for overhead frames For individual combination 5 4 3 1 + 2 Fig. 1 Overhead frame stringer (piece) System width 080 10 098.16 2 Overhead frame stringer (pair) 080 10 099.

78 Overhead Frames Parts for overhead frames For individual combination Fig. 1 Overhead frame stringer (piece) System width Overhead frame stringer (pair) Unkitted slide rail with end stoppers Roller Pair of stoppers Swivel bracket with slide rail and roller To mount on mounting frame and rear frame Swivels through 360 Secured with clamping lever D x H Usable Depth 550 x

79 Lighting Light rail LT 3 m power cord with Schuko plug Fixing rail For mounting on overhead frame or overhead frame stringers System width W x D x H x 200 x 80 2 x x 200 x 80 2 x x 200 x 80 2 x Watt Lux Light rail HT 3 m power cord with Schuko plug On/Off switch Electronic ballast Parabolic mirrored diffuser prevents glare Mounting bracket For mounting on overhead frame or overhead frame stringers Compact TCL fluorescent tube, neutral white, 4000 K System width W x D x H x 90 x x x 90 x x x 90 x x Watt Lux 614

80 Lighting Side mounted light HT 3 m power cord with Schuko plug On/Off switch Electronic ballast Fitting D right / left 500 Parabolic mirrored diffuser prevents glare Base plate Compact TCL fluorescent tube, neutral white, 4000 K Order multiple: 1 piece Watt Lux 1 x Energy Supply Narrow back panel System width W x D x H With perforation Panel accepts power ducts, compressed air units and holders x 20 x x 20 x x 20 x Power Duct Power duct is mounted on the panel 3 or 6 power sockets On/Off switch Optionally available with residual-current circuit breaker (RCCB) RCCB W x D x H 4 m cord with Schuko plug Sockets Schuko 300 x 45 x Schuko 450 x 45 x Schuko 400 x 45 x Schuko 550 x 45 x

Compressed Air Mounted on narrow back panel or perforated panel Supply unit: Pressure regulator,

Suspended from the roller of the overhead frame Tool balancer: Cable length 1700, load capacity

81 Compressed Air Mounted on narrow back panel or perforated panel Supply unit: Pressure regulator, filter, lubricator, inlet 1 x G 1/4, outlet 3 x G 1/4 2 Distributor: Inlet 1 x G 1/4, outlet 2 x G 1/4 1 Fig. 1 2 Compressed air supply unit Compressed air distributor Balancers Suspended from the roller of the overhead frame Tool balancer: Cable length 1700, load capacity from 1.4 to 2.4 kg Tool balancer Air hose balancer Air hose balancer: Hose length 1500, load capacity from 0.7 to 2.0 kg Tool balancer Air hose balancer

82 panels multiple folded at the sides for enhanced stability rated Panels With perforation Panel accepts power ducts, compressed air units and holders System width W x D x H x 15 x x 15 x x 15 x Louvre Panels With louvres Suitable for use with adapters and plastic bins System width W x D x H x 15 x x 15 x x 15 x Combined Panels With perforation and louvres Panel accepts power ducts, compressed air units, holders and plastic bins System width W x D x H x 15 x x 15 x x 15 x

Rails Support rails To take power ducts and plastic bins 2001, 2002 and 2003 (see page 512) Total load: 25 kg evenly distributed ESD version: conductive powder-coating and earthing lead System width

83 Rails Support rails To take power ducts and plastic bins 2001, 2002 and 2003 (see page 512) Total load: 25 kg evenly distributed ESD version: conductive powder-coating and earthing lead System width W x D x H x 15 x x 15 x x 15 x ESD x 15 x x 15 x x 15 x Angled rails To take plastic bins 2001, 2002 and 2003 (see page 512) Total load: 25 kg evenly distributed Length of rail (1): see table Length of angled rails (2): 300 per rail Swivel range of angled rails: max. 55 ESD version: conductive powder-coating and earthing lead System width W x D x H Length of rail (1) x 15 x x 15 x x 15 x ESD x 15 x x 15 x x 15 x

84 Shelves Wooden shelf Melamine faced shelf with bonded edge banding (thickness 30 ) Maximum UDL: 60 kg System width W x D x H x 250 x ** x 250 x ** x 250 x ** Metal shelf Maximum UDL: 60 kg ESD version: conductive powder-coating and earthing lead Made from sheet steel System width W x D x H x 250 x x 250 x x 250 x ** ** ** ESD x 250 x x 250 x x 250 x ** Colour information - see cover 619

85 Shelves Variable rake metal shelf depth upstand on one edge Rake adjustable from 0 to 30 in 15 increments Maximum UDL: 60 kg System width W x D Upstand lip on one edge that can be located at the front or rear during assembly ESD version: conductive powder-coating and earthing lead x x x ** ** ** ESD x x x Variable rake metal shelf depth 350 Adjustment range in depth: up to upstand on one edge Rake adjustable from 0 to 30 in 15 increments Maximum UDL: 60 kg Upstand lip on one edge that can be located at the front or rear during assembly ESD version: conductive powder-coating and earthing lead System width W x D x x x ** ** ** ESD x x x

Shelves Tiltable metal shelf trays Adjustment range in depth: up to 80 20 all-round upstand Rake infinitely adjustable from 0 to 30 Brackets are screwed to the frame with sliding blocks Maximum UDL:

20 1000 955 x 650 121 02 079.20 1235 1190 x 650 121 02 080.

86 Shelves Tiltable metal shelf trays Adjustment range in depth: up to all-round upstand Rake infinitely adjustable from 0 to 30 Brackets are screwed to the frame with sliding blocks Maximum UDL: 60 kg ESD version: conductive powder-coating and earthing lead System width W x D x x x ** ** ** ESD x x x Footrest Angle can be adjusted from 0 to 20 Lever fixes footrest at desired angle With slip-resistant ribbed rubber mat 4 adjustable feet Support area height adjustable from in 25 steps ESD version: conductive surface and earth lead Area W x D W x D x H 520 x x 440 x ESD 520 x x 440 x ** Colour information - see cover 621

Panels For mounting on the frame Height adjustable System width W x H 815 855 x 300 080 13 203.

16 Keyboard drawer Accepts a standard PC keyboard Mounted beneath the C-sections Ergonomic wrist rest

87 Panels For mounting on the frame Height adjustable System width W x H x x x Keyboard drawer Accepts a standard PC keyboard Mounted beneath the C-sections Ergonomic wrist rest With locking mechanism Sheet steel body Plastic drawer W x D x H Keyboard rest W x D x H 560 x 400 x x 250 x

88 Brackets For bottled drinks and Tetra-Paks Material: Steel, zinc-coated Sleeve For holding ring files Made from sheet steel W x D x H 100 x 290 x

Suspended These cabinets are suspended from the C-section stringer (pair) Central lock with push-in cylinder - keyed differently as standard Load capacity: 30 kg per drawer Telescopic slide: 100%

89 Suspended These cabinets are suspended from the C-section stringer (pair) Central lock with push-in cylinder - keyed differently as standard Load capacity: 30 kg per drawer Telescopic slide: 100% extension ESD version: Conductive powder-coating, drawer contact spring and earthing lead B-1 Internal drawer dimensions: width 289 x depth 431 B-2 Internal drawer dimensions: width 289 x depth 431 W x D x H front height 360 x 500 x ** ESD 360 x 500 x W x D x H front height 360 x 500 x x ** ESD 360 x 500 x x B-3 Internal drawer dimensions: width 289 x depth 431 B-4 Internal drawer dimensions: width 289 x depth 431 W x D x H front height 360 x 500 x x 125, 1 x ** ESD 360 x 500 x x 125, 1 x W x D x H front height 360 x 500 x x ** ESD 360 x 500 x x S-2 Internal drawer dimensions: width 147 x depth 442 S-4 Internal drawer dimensions: width 147 x depth 442 W x D x H front height 215 x 500 x x 125, 1 x ** ESD 215 x 500 x x 125, 1 x W x D x H front height 215 x 500 x x ** ESD 215 x 500 x x

Turntable Without locking mechanism Stainless steel platter with ribbed rubber mat ESD version:conductive rubber mat and earthing lead Load capacity: 180 kg Ø x H 380 x 20 080 10 036.

90 Turntable Without locking mechanism Stainless steel platter with ribbed rubber mat ESD version:conductive rubber mat and earthing lead Load capacity: 180 kg Ø x H 380 x x ESD 380 x x With locking mechanism Locking mechanism with detent pin at 45º intervals, turntable can also rotate freely Stainless steel platter with ribbed rubber mat Load capacity: 180 kg ESD version: conductive surface and earth lead Ø x H 380 x x ESD 380 x x ** Colour information - see cover 625

Mounting frame To hold all APS accessories To mount on worktop Double-sided System width W x D x H Usable height 815 855 x 70 x 1035 120 15 010.16 1000 1040 x 70 x 1035 1000 120 15 011.

91 Mounting frame To hold all APS accessories To mount on worktop Double-sided System width W x D x H Usable height x 70 x x 70 x x 70 x ESD Earthing box, earthing lead, wrist strap with cord 2 2 Elastic wrist strap Adjustable with clasp 1 Conductive fibres are woven into strap (no metal plate, antiallergenic) Press-stud: 3 (internationally compatible) Highly elastic coil cord, length 2.4 m 3 1 MOhm resistor Press-stud 3/10 Fig Earthing box Wrist strap with lead Earthing lead

92 Swivel Arms Complete Models Rotating and inclinable shelves Includes rear frame upright with swivel arm and accessory mount Rotates through 360º, infinitely adjustable angle 0º 45º, locked in position with clamping lever Ideal for use with Euro boxes 400 x swivel joints Front upstand Load capacity: 25 kg ESD version: conductive powder-coating and earthing lead W x D x H 315 x 405 x ** 415 x 305 x ** ESD 315 x 405 x x 305 x Rotating and inclinable tray Includes rear frame upright with swivel arm and accessory mount Rotates through 360º, infinitely adjustable angle 0º - 45º, locked in position with clamping lever Ideal for use with Euro boxes x swivel joints All-round upstand Load capacity: 25 kg ESD version: conductive powder-coating and earthing lead W x D x H 610 x 410 x ** ESD 610 x 410 x ** Colour information - see cover 627

93 Swivel Arms Complete Models Computer shelves Includes rear frame upright and accessory mount Rotates through 360º Load capacity: 25 kg TFT Display Holder 3 swivel joints All-round upstand ESD version: conductive powder-coating and earthing lead W x D x H 500 x 400 x ** ESD 500 x 400 x Includes rear frame upright and accessory mount Infinitely adjustable 0 15º, secured in position by clamping lever Load capacity: 25 kg Mounting options: VESA 75 x 75 and VESA 100 x 100 W x D x H 335 x 110 x ** ESD 335 x 110 x Info Keyboard and mouse rest - see page 634 Holding frame Includes rear frame upright and accessory mount Rotates through 360º Double-sided Load capacity: 25 kg ESD version: conductive powder-coating and earthing lead W x D x H 690 x 50 x ** ESD 690 x 50 x

94 for Holding Frame Shelves for holding frame Adjustable depth and angle Height adjustable in 25 steps Angles 0º 30º ESD version (as standard): Conductive powder-coating and earthing lead W x D x H 605 x 305 x 48 Adjustment Depth x 405 x perforated panel for holding frame Height adjustable in 25 steps ESD version (as standard): conductive powder-coating W x D x H 630 x 9 x Bin rail for holding frame Height adjustable in 25 steps For 6 plastic bins 2001, 2001B, 2002 (see page 512) ESD version (as standard): conductive powder-coating W x D x H 630 x 27 x Rack for holding frame Height adjustable in 25 steps For 12 plastic bins 2001, 2001B, 2002 (see page 512) ESD version (as standard): conductive powder-coating W x D x H 634 x 141 x ** Colour information - see cover 629

95 Parts for Swivel Arms Rear frame upright with swivel arm For kitting with holding frame and accessory mounts 1 swivel joint ESD version: conductive powder-coating W x D x H Rear frame upright 50 x 350 x ** Rear frame upright ESD (requires earthing lead not supplied) 50 x 350 x Earthing lead Swivel arm extension To extend the rear frame upright with swivel arm 1 swivel joint ESD version (as standard): conductive powder-coating W x D x H 300 x 50 x

Parts for Swivel Arms Lateral adaptors To mount the swivel arm on the frame ESD version: conductive powder-coating W x D x H Adaptor 080 10 101.** 90 x 70 x 160 ESD Adaptor 080 10 101.

96 Parts for Swivel Arms Lateral adaptors To mount the swivel arm on the frame ESD version: conductive powder-coating W x D x H Adaptor ** 90 x 70 x 160 ESD Adaptor Holding frame for swivel arm For mounting on the swivel arm Additional swivel joint Rotates through 360º Double-sided ESD version (as standard): conductive powder-coating Usable height W x D x H 400 (double sided) 690 x 50 x Info for holding frame - see page 629 ** Colour information - see cover 631

97 Accessory mount and accessories Accessory mount for swivel arm For mounting on the swivel arm Additional swivel joint Rotates through 360º ESD version (as standard): conductive powder-coating Inclinable shelves for accessory mount W x D x H 300 x 50 x Infinitely adjustable 0º 45º Ideal for use with Euro boxes 400 x 300 Mounted on the accessory mount ESD version (as standard): conductive powder-coating W x D x H 315 x 405 x x 305 x Inclinable tray for accessory mount Infinitely adjustable 0º 45º, locked in position with clamping lever Ideal for use with Euro boxes x 400 (please order Euro boxes separately see page 288) All-round upstand Mounted on the accessory mount ESD version (as standard): conductive powder-coating W x D x H 610 x 410 x

98 for accessory mount IT shelf for accessory mount Mounted on the accessory mount Rotates through 360º ESD version (as standard): conductive powder-coating W x D x H 500 x 400 x Keyboard rest and accessories rest for IT shelf 1 Keyboard rest accepts a standard PC keyboard rest for IT accessories (mouse, memory card reader etc. ESD version (as standard): conductive powder-coating 2 Fig. 1 2 W x D x H Keyboard rest 490 x 212 x rest 490 x 212 x

99 for accessory mount TFT Monitor holder for accessory mount Infinitely adjustable ±15, secured with clamping lever Mounted on the accessory mount ESD version (as standard): conductive powder-coating W x D x H 355 x 92 x Keyboard and mouse tray for TFT monitor holder For mounting on TFT monitor holder ESD version (as standard): conductive powder-coating Made from sheet steel W x D x H 650 x 250 x

Drawing holder For mounting on the frame A4 size With plastic clip and adjustable rule Drawing holder 810 05 004 Special attachment for rear frame 080 10 021.

100 Drawing holder For mounting on the frame A4 size With plastic clip and adjustable rule Drawing holder Special attachment for rear frame Instruction sheet holder With 10 clear A4 wallets with frame (5 red, 5 black) With 10 plastic tabs and blank labels For mounting on the frame Dimension Height

101 636

Chipline - The Aluminium Section System Technical Information.

................................. 647 651 Assembly workstations with square section Fixed or variable height benches.

......... 672 685 Workbenches Base units....................................... 686 Worktops................................... 687 691 Sitting/standing workstations.

102 Chipline - The Aluminium Section System Technical Information Assembly workstations with bevel section Fixed or variable height benches Assembly workstations with square section Fixed or variable height benches Worktops for assembly workstations Workbenches Base units Worktops Sitting/standing workstations Assembly and material trolleys Assembly Trolleys Material trolleys

Chipline - The Aluminium Section System Chipline Elegance and Flexibility Outstanding products and services cannot be slaves to convention.

The space that is available in a workshop can make many demands on the individual dimensions of workshop equipment.

103 Chipline - The Aluminium Section System Chipline Elegance and Flexibility Outstanding products and services cannot be slaves to convention.this is as true of the products made on Chipline workstations as it is of Chipline itself. The space that is available in a workshop can make many demands on the individual dimensions of workshop equipment. With Chipline, the aluminium section system from bott, it's easy to create workstation systems of any desired size and configuration. Each product is specially made and assembled for its appointed tasks according to the user's precise specifications. An experienced team of project designers contributes creative ideas and practical solutions. With its anodised surface finish, Chipline also impresses visually by its simple, timeless elegance. 638

104 639

Chipline - The Aluminium Section System The system

that go beyond the technical possibilities of our

The patented aluminium section system from bott gives

solutions that go beyond conventional dimensions.

105 Chipline - The Aluminium Section System The system that meets every challenge in terms of ergonomics, individuality and productivity. We use Chipline to design and realise customer wishes that go beyond the technical possibilities of our modular system (APS). The patented aluminium section system from bott gives creativity a free rein and allows special custom solutions that go beyond conventional dimensions. Bevel sections Square sections Half-bevel section Aluminium section 40 x 40 Bevel section Aluminium section 80 x

106 Fresh ideas - professional action. From practical advice and planning to professional installation. bott plans and implements workstation systems to your exact specifications. Our services start with analysis, design and planning in close cooperation with our partner - the customer. 641

Chipline Assembly s with Bevel Section Technical Data Base in attractive natural finish anodised bevel and half-bevel section White vanity panel at rear of bench 4 adjustable feet to deal with uneven

different height adjustment options Detent pin: height adjustment in 25- steps using 2 detent pins Hand crank: infinitely variable height adjustment with 2 hydraulic cylinders and hand crank Electric

107 Chipline Assembly s with Bevel Section Technical Data Base in attractive natural finish anodised bevel and half-bevel section White vanity panel at rear of bench 4 adjustable feet to deal with uneven floors Basic modules available in 2 types Standard: Continuous worktop with no recess Gantry top: The recess in the worktop allows a workbench gantry top to be fitted at any time Choice of 3 different height adjustment options Detent pin: height adjustment in 25- steps using 2 detent pins Hand crank: infinitely variable height adjustment with 2 hydraulic cylinders and hand crank Electric motor: infinitely variable height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) Product Benefits Extremely high load capacity Attractive and visually appealing Gantry top can also be supplied Delivered ready assembled ESD version available 642

Chipline Assembly s with Bevel Section Assembly Desk with Fixed Height Load capacity: 300 kg area load / 200 kg point load Standard type W x D Height 1200 x 780

CL 01 08 04 ESD Melamine faced 30 CL 01 08 05 Laminate faced 30 CL 01 08 06 Melamine faced 30 CL 01 08 07 Laminate faced 30 CL 01 08 08 Beech multiplex 30 CL 01

108 Chipline Assembly s with Bevel Section Assembly Desk with Fixed Height Load capacity: 300 kg area load / 200 kg point load Standard type W x D Height 1200 x x Gantry top Worktop Thickness Gantry top Melamine faced 30 CL Laminate faced 30 CL Beech multiplex 30 CL Solid Beech 30 CL ESD Melamine faced 30 CL Laminate faced 30 CL Melamine faced 30 CL Laminate faced 30 CL Beech multiplex 30 CL Solid Beech 30 CL ESD Melamine faced 30 CL Laminate faced 30 CL Non-standard size - quote dimensions when ordering: x CL

Chipline Assembly s with Bevel Section Assembly Height Adjustment by Detent Pin Height adjustment with 2 detent pins in 25 pitch Working height adjustable from 750 to 1050 Load capacity: 220 kg area

109 Chipline Assembly s with Bevel Section Assembly Height Adjustment by Detent Pin Height adjustment with 2 detent pins in 25 pitch Working height adjustable from 750 to 1050 Load capacity: 220 kg area load / 200 kg point load Standard type W x D Height 1200 x x Gantry top Worktop Thickness Standard type Gantry top Melamine faced Laminate faced Beech multiplex CL CL CL CL CL CL Solid Beech ESD 30 CL CL Melamine faced Laminate faced CL CL CL CL Melamine faced 30 CL CL Laminate faced 30 CL CL Beech multiplex 30 CL CL Solid Beech 30 CL CL ESD Melamine faced 30 CL CL Laminate faced 30 CL CL Non-standard size - quote dimensions when ordering: x CL CL

Chipline Assembly s with Bevel Section Assembly Height Adjustment by Hand Crank Height adjustment with 2 hydraulic cylinders and foldaway hand crank Working height adjustable from 750 to 1050 Load

110 Chipline Assembly s with Bevel Section Assembly Height Adjustment by Hand Crank Height adjustment with 2 hydraulic cylinders and foldaway hand crank Working height adjustable from 750 to 1050 Load capacity: 300 kg area load / 200 kg point load Standard type W x D Height 1200 x x Worktop Standard Thickness Gantry top Melamine faced Laminate faced Beech multiplex Solid Beech CL CL CL CL CL CL CL CL ESD Melamine faced Laminate faced CL CL CL CL Melamine faced 30 CL CL Laminate faced 30 CL CL Beech multiplex 30 CL CL Solid Beech 30 CL CL ESD Melamine faced 30 CL CL Laminate faced 30 CL CL Gantry top Non-standard size - quote dimensions when ordering: x CL CL

Chipline Assembly s with Bevel Section Assembly Height Adjustment with Electric Motor Infinitely variable height adjustment with 2 parallel controlled linear drives and control panel (3 working

111 Chipline Assembly s with Bevel Section Assembly Height Adjustment with Electric Motor Infinitely variable height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) Working height adjustable from 750 to 1050 Load capacity: 220 kg area load / 200 kg point load (higher load capacity on request) Standard type W x D Height 1200 x Worktop Standard Thickness Gantry top Melamine faced Laminate faced Beech multiplex Solid Beech CL CL CL CL CL CL CL CL ESD Melamine faced Laminate faced CL CL CL CL Gantry top Melamine faced 30 CL CL Laminate faced 30 CL CL Beech multiplex 30 CL CL x Solid Beech 30 CL CL ESD Melamine faced 30 CL CL Laminate faced 30 CL CL Non-standard size - quote dimensions when ordering: x CL CL

112 Chipline Assembly s with Bevel Section Gantry Top for Assembly workstation To fit the Gantry Top type base unit To mount accessories such as lamps, shelves, swivel arms etc. Uprights in bevel section Arms in half-bevel section 1 slide crossbar in half-bevel section 2 sliders with snap hook Supplied ready assembled For worktop W x D Gantry top dimensions W x D x H 1200 x 1200 x 500 x 1320 CL x x x 1320 CL Non-standard size - quote dimensions when ordering: x x x CL

113 Chipline Assembly s with Bevel Section Light Rail LT Light rail LT with crossbar for mounting 3 m power cord with Schuko plug Fixing rail For mounting on overhead frame or overhead frame stringers Crossbar L Lamp dimensions W x D x H x 205 x 80 2 x 30 CL x 205 x 80 2 x 36 CL Watt Light Rail HT Light rail HT with mounting crossbar 3 m power cord with Schuko plug On/Off switch Electronic ballast Parabolic mirrored diffuser prevents glare Mounting bracket For mounting on overhead frame or overhead frame stringers Compact TCL fluorescent tube, neutral white, 4000 K Crossbar L Lamp dimensions W x D x H Watt x 90 x x x 90 x x 36 CL CL

114 Chipline Assembly s with Bevel Section Side mounted light HT 3 m power cord with Schuko plug On/Off switch Electronic ballast Parabolic mirrored diffuser prevents glare Base plate Compact TCL fluorescent tube, neutral white, 4000 K Order multiple: 1 piece Depth 550 Mounting kit 3 for attachment to upright Watt 1 x CL Power Duct For mounting on gantry frame or gantry top 3 or 6 power sockets On/Off switch Optionally available with residual-current circuit breaker (RCCB) 4 m cord with Schuko plug RCCB Schuko 300 x 45 x Schuko 450 x 45 x Schuko 400 x 45 x Schuko 550 x 45 x Mounting kit 7 for attaching power duct to upright W x D x H Sockets CL

Chipline Assembly s with Bevel Section Shelf To mount on gantry top Height adjustable 2 arms, 1 stringer made from natural anodised aluminium halfbevel section 1 melamine faced shelf, 19 thick W x D

115 Chipline Assembly s with Bevel Section Shelf To mount on gantry top Height adjustable 2 arms, 1 stringer made from natural anodised aluminium halfbevel section 1 melamine faced shelf, 19 thick W x D 1200 x 250 CL x 250 CL ESD 1200 x 250 CL x 250 CL Non-standard size - quote dimensions when ordering: x CL Inclinable shelf Non-standard size - quote dimensions when ordering: To mount on gantry top Height adjustable Shelf made from sheet steel Variable angle from 0-90 W x D 1000 x 200 CL x 350 CL x 200 CL x 350 CL x CL Support Rail To mount on gantry top Takes plastic bins size 2001 and 2002 (see page 512) Natural anodised aluminium section Non-standard size - quote dimensions when ordering: Length 1000 CL CL CL

Chipline Assembly s with Bevel Section Swivel arm with shelf Can be swivelled and angled 2 swivel joints Variable angle from 0-45, secured with clamping lever Worktop

Swivel arm with support rail For mounting plastic bins size 2001 and 2002 (see page 512) 2 swivel joints, secured with clamping lever Worktop dimensions W x D 1200 x 1500

116 Chipline Assembly s with Bevel Section Swivel arm with shelf Can be swivelled and angled 2 swivel joints Variable angle from 0-45, secured with clamping lever Worktop dimensions W x D 1200 x 1500 x 750 Shelf dimensions W x D 400 x x 300 To mount on gantry top left right left right CL CL CL CL Swivel arm with support rail For mounting plastic bins size 2001 and 2002 (see page 512) 2 swivel joints, secured with clamping lever Worktop dimensions W x D 1200 x 1500 x 750 Support Rail W x D To mount on gantry top left right left right CL CL CL CL More accessories will be found on pages

Chipline Assembly s with Square Section Technical Data Base in natural anodised aluminium section White vanity panel at rear of bench 4 adjustable feet to deal with

Continuous worktop with no recess Gantry top: Continuous worktop with no recess, support for gantry top (bench depth + 80 ) Choice of 3 different height adjustment

and hand crank infinitely variable height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory)

117 Chipline Assembly s with Square Section Technical Data Base in natural anodised aluminium section White vanity panel at rear of bench 4 adjustable feet to deal with uneven floors Choice of 2 base units with fixed height Box type: With high stability Desk type: With plenty of legroom Basic modules available in 2 types Standard: Continuous worktop with no recess Gantry top: Continuous worktop with no recess, support for gantry top (bench depth + 80 ) Choice of 3 different height adjustment options Detent pin: height adjustment in 25- steps using 2 detent pins Hand crank: Electric motor: infinitely variable height adjustment with 2 hydraulic cylinders and hand crank infinitely variable height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) Product Benefits Extremely high load capacity Attractive and visually appealing Gantry top can also be supplied Delivered ready assembled ESD version available 652

Chipline Assembly s with Square Section Assembly Box, Fixed Height High stability 4 adjustable feet to deal with uneven floors Base dimensions W x D 980 x Height Working height 780 or 900 when using

118 Chipline Assembly s with Square Section Assembly Box, Fixed Height High stability 4 adjustable feet to deal with uneven floors Base dimensions W x D 980 x Height Working height 780 or 900 when using a 30 thick worktop Worktop not included please order separately (see pages ) With the gantry top type the overall depth increases by 80 For worktops Width Depth Gantry top / 750 CL / x / 900 CL x / 750 CL / x / 900 CL x / 750 CL / x / 900 CL x / 750 CL / x / 900 CL Non-standard size - quote dimensions when ordering: x CL Gantry top Desk with Fixed Height Plenty of legroom 4 adjustable feet to deal with uneven floors Working height 780 or 900 when using a 30 thick worktop Worktop not included please order separately (see pages ) Standard type With the gantry top type the overall depth increases by 80 Gantry top W x D 980 x Height For worktops Width Depth Gantry top / 750 CL / x / 900 CL x / 750 CL / x / 900 CL x / 750 CL / x / 900 CL x / 750 CL / x / 900 CL Standard type CL CL CL CL CL CL CL CL Non-standard size - quote dimensions when ordering: x CL CL

119 Chipline Assembly s with Square Section Assembly Height Adjustment by Detent Pin Height adjustment with 2 detent pins in 25 pitch Worktop is not supplied (see pages ) With the gantry top type the overall depth increases by 80 Standard type Gantry top W x D 980 x Height For worktops Width Depth Standard Gantry top / 750 CL CL / x / 900 CL CL x / 750 CL CL / x / 900 CL CL Non-standard size - quote dimensions when ordering: x CL CL

Chipline Assembly s with Square Section Assembly Height Adjustment by Hand Crank Infinitely variable height adjustment with 2 hydraulic cylinders and foldaway hand crank Worktop is not supplied (see

120 Chipline Assembly s with Square Section Assembly Height Adjustment by Hand Crank Infinitely variable height adjustment with 2 hydraulic cylinders and foldaway hand crank Worktop is not supplied (see pages ) With the gantry top type the overall depth increases by 80 Standard type Gantry top W x D 980 x Height For worktops Width Depth Standard Gantry top / 750 CL CL / x / 900 CL CL x / 750 CL CL / x / 900 CL CL Non-standard size - quote dimensions when ordering: x CL CL

Chipline Assembly s with Square Section Assembly Height Adjustment with Electric Motor Infinitely variable height adjustment with 2 parallel controlled linear drives and control

980 x Height For worktops Width Depth Standard Gantry top / 750 CL 01 05 21 CL 01 05 01 1000 / 1200 980 x 750 750 / 900 CL 01 05 22 CL 01 05 02 750-1050 1480 x / 750 CL 01 05 23

121 Chipline Assembly s with Square Section Assembly Height Adjustment with Electric Motor Infinitely variable height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) Worktop is not supplied (see pages ) With the gantry top type the overall depth increases by 80 Standard type W x D 980 x Height For worktops Width Depth Standard Gantry top / 750 CL CL / x / 900 CL CL x / 750 CL CL / x / 900 CL CL Non-standard size - quote dimensions when ordering: x CL CL Gantry top 656

122 Chipline Assembly s Worktops Melamine faced Material: Chipboard Top surface: Melamine faced to DIN Bottom surface: Melamine faced to DIN Edges: Colour: Surface data: Width Width Depth 3 ABS edges antistatic, rounded radius R3 light grey Melamine laminated to DIN 68765, partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) Thickness CL CL CL CL CL CL CL CL CL CL CL CL Depth Thickness CL CL CL CL CL CL CL CL CL CL CL CL Non-standard size - quote dimensions when ordering: 30 CL CL

123 Chipline Assembly s Worktops Laminate faced Material: Chipboard Top surface: HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: Colour: Surface data: Width Width Depth 3 ABS edges antistatic, rounded radius R3 light grey High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Thickness CL CL CL CL CL CL CL CL CL CL CL CL Depth Thickness CL CL CL CL CL CL CL CL CL CL CL CL Non-standard size - quote dimensions when ordering: 30 CL CL

Chipline Assembly s Worktops Beech multiplex Material: Beech multiplex board Top surface: oiled Bottom surface: oiled Colour: Bonding: Natural beech

DIN 68705 Part 2 Width 1000 1200 1500 1800 Depth Thickness CL 02 14 04 750 30 CL 02 14 05 900 CL 02 14 06 CL 02 14 07 750 30 CL 02 14 08 900 CL 02 14 09 CL

124 Chipline Assembly s Worktops Beech multiplex Material: Beech multiplex board Top surface: oiled Bottom surface: oiled Colour: Bonding: Natural beech Laminated bi-directionally bonded beech veneers, bonding resistant in rooms with high humidity and occasional contact with water (IW 67) Grade: II / III to DIN Part 2 Width Depth Thickness CL CL CL CL CL CL CL CL CL CL CL CL Non-standard size - quote dimensions when ordering: 30 CL

125 Chipline Assembly s Worktops Solid Beech Material: Solid beech Top surface: 2 coats of polyurethane varnish Bottom surface: 1 coat of polyurethane varnish Colour: Surface data: Width Depth Natural beech Surface resistant to water, oils, acids and chemicals, dovetailed joints for high load capacity Thickness CL CL CL CL CL CL CL CL CL CL CL CL Width Depth Thickness CL CL CL CL CL CL CL CL CL CL CL CL Non-standard size - quote dimensions when ordering: 30 CL CL

126 Chipline Assembly s Worktops Melamine faced ESD For electrostatically sensitive components Material: Chipboard, conductive Top surface: Melamine faced, conductive to DIN Bottom surface: Melamine faced, conductive to DIN Edges: Colour: Surface data: 3 ABS edges antistatic, rounded radius R3 light grey Leakage values: according to IEC Melamine faced, conductive to DIN 68765, partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) Width Width Depth Thickness CL CL CL CL CL CL CL CL CL CL CL CL Depth Thickness CL CL CL CL CL CL CL CL CL CL CL CL Non-standard size - quote dimensions when ordering: 30 CL CL

127 Chipline Assembly s Worktops Laminate faced ESD For electrostatically sensitive components Material: Chipboard, conductive Top surface: HPL laminate 0.8, conductive to DIN EN 438 Bottom surface: Edges: Colour: Surface data: HPL laminate surface layer 3 ABS edges antistatic, rounded radius R3 light grey Leakage values: according to IEC Width Depth High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Thickness CL CL CL CL CL CL CL CL CL CL CL CL Width Depth Thickness CL CL CL CL CL CL CL CL CL CL CL CL Non-standard size - quote dimensions when ordering: 30 CL CL

128 Chipline Assembly s Parts Gantry Frame for Assembly with Square Section To mount on base unit To take accessories such as lamps, shelves, swivel arms and much more Gantry frame in natural anodised aluminium section 2x uprights for gantry frame, section 80 x 40 1x crossbar, section 40 x 40 W x H How supplied Available for working height 980 x assembled 780 / 900 / height adjustable CL x 1200 assembled 780 / 900 / height adjustable CL x 1300* 980 x x assembled unassembled assembled 780 / height adjustable 780 / 900 / height adjustable CL CL CL x 1200 assembled 780 / 900 / height adjustable CL x 1300* 1480 x 1500 assembled unassembled 780 / height adjustable CL CL * assembled for height 780 / height adjustable, unassembled for height 900 Non-standard size - quote dimensions when ordering: x x CL Upright for Gantry Frame To mount on base unit Takes accessories such as lamps, shelves, swivel arms Upright made from natural anodised aluminium section 80 x 40 End caps included Non-standard size - quote dimensions when ordering: Height CL CL CL CL x CL

129 Chipline Assembly s Parts Gantry Top for Assembly with Square Section To mount on base unit Takes accessories such as lamps, shelves, swivel arms Gantry top in natural anodised aluminium section W x D 980 x How supplied 2 x uprights for gantry top, section 80 x 40 1 x crossbar, section 40 x 40 2 x arms, section 40 x 40 Height Supplied assembled for working height assembled CL / 900 / height adjustable 980 x 750 assembled CL x assembled CL / height adjustable 980 x 750 assembled CL x unassembled CL Supplied unassembled 980 x 750 unassembled CL x assembled CL / 900 / height adjustable 1480 x 750 assembled CL x assembled CL / height adjustable 1480 x 750 assembled CL x unassembled CL Supplied unassembled 1480 x 750 unassembled CL Non-standard size - quote dimensions when ordering: x x CL

Chipline Assembly s Parts Upright for gantry top To mount on base unit Takes accessories such as lamps, shelves, swivel arms Upright made from natural anodised aluminium section 80 x 40 Integral

130 Chipline Assembly s Parts Upright for gantry top To mount on base unit Takes accessories such as lamps, shelves, swivel arms Upright made from natural anodised aluminium section 80 x 40 Integral connectors for gantry arms Height 560 CL CL CL CL Non-standard size - quote dimensions when ordering: x CL Arms for gantry top Arms fit on the gantry upright Allows a lamp to be mounted (requires 2 arms) Arms made from natural anodised aluminium section 40 x 40 End caps included Depth CL CL Non-standard size - quote dimensions when ordering: x CL

131 Chipline Assembly s Parts Crossbar 40 x 40 for gantry top and gantry frame Crossbar made from natural anodised aluminium section 40 x 40 Integral connectors To fit on gantry arm or gantry upright Provides added stability for gantry tops and gantry frame Can take additional accessories in conjunction with bott sliding blocks Width 900 CL CL Non-standard size - quote dimensions when ordering: x CL Crossbar 80 x 40 for gantry top and gantry frame Crossbar made from natural anodised aluminium section 80 x 40 Integral connectors To fit on gantry arm or gantry upright Provides added stability for gantry tops and gantry frame Can take additional accessories in conjunction with bott sliding blocks Non-standard size - quote dimensions when ordering: Width 900 CL CL x CL

Chipline Assembly s Slide rail Fits on the arm of the gantry top Slide rail made from aluminium section End caps included To take runners Width 980 CL 03 03 81 1480 CL 03 03 82 for

132 Chipline Assembly s Slide rail Fits on the arm of the gantry top Slide rail made from aluminium section End caps included To take runners Width 980 CL CL for slide rail Pair of stoppers Runner with snap hook Running hanger with snap hook Runs in the slot in the crossbar To suspend tools and accessories CL

Chipline Assembly s Parts Light Rail LT Fitted on crossbar and gantry top 3 m power cord with Schuko plug Fixing rail For mounting on overhead frame or overhead frame stringers System size Lamp

133 Chipline Assembly s Parts Light Rail LT Fitted on crossbar and gantry top 3 m power cord with Schuko plug Fixing rail For mounting on overhead frame or overhead frame stringers System size Lamp dimensions W x D x H x 205 x 80 2 x x 205 x 80 2 x x 205 x 80 2 x Mounting kit 1 to fit light rail to the crossbar Watt CL Light Rail HT Fitted on crossbar and gantry top 3 m power cord with Schuko plug On/Off switch Electronic ballast Parabolic mirrored diffuser prevents glare Mounting bracket For mounting on overhead frame or overhead frame stringers Compact TCL fluorescent tube, neutral white, 4000 K System size Lamp dimensions W x D x H x 90 x x x 90 x x x 90 x x Mounting kit 2 to fit light rail to the crossbar Watt CL

134 Chipline Assembly s Parts Side mounted light HT Can be mounted on right or left to gantry top, gantry frame or gantry upright 3 m power cord with Schuko plug On/Off switch Electronic ballast Parabolic mirrored diffuser prevents glare Base plate Compact TCL fluorescent tube, neutral white, 4000 K Order multiple: 1 piece Lamp dimensions Depth 550 Mounting kit 3 to fit the side mounted light to the gantry upright Watt 1 x CL Power Duct For mounting on gantry frame or gantry top 3 or 6 power sockets On/Off switch Optionally available with residual-current circuit breaker (RCCB) 4 m cord with Schuko plug RCCB W x D x H Sockets Schuko 300 x 45 x Schuko 450 x 45 x Schuko 400 x 45 x Schuko 550 x 45 x Mounting kit 7 for attaching power duct to upright CL

Chipline Assembly s Parts Fixed Shelves For mounting on gantry frame or gantry top Height adjustable 2 arms and 1 stringer in natural anodised aluminium section 40 x 40 Shelf

ordering: x CL 04 02 99 Inclinable shelves For mounting on gantry frame or gantry top Height adjustable Shelf made from sheet steel ESD version: conductive powder-coating

135 Chipline Assembly s Parts Fixed Shelves For mounting on gantry frame or gantry top Height adjustable 2 arms and 1 stringer in natural anodised aluminium section 40 x 40 Shelf is melamine faced, 20 thick W x D 980 x x x x 250 CL CL ESD CL CL Non-standard size - quote dimensions when ordering: x CL Inclinable shelves For mounting on gantry frame or gantry top Height adjustable Shelf made from sheet steel ESD version: conductive powder-coating Non-standard size - quote dimensions when ordering: W x D 900 x x x x 350 CL CL CL CL x CL

Chipline Assembly s Parts rated Panels For mounting on gantry frame or gantry top Additional reinforcements on the back Multiple folded at sides rations: 9.2 x 9.2 Pitch: 38.

136 Chipline Assembly s Parts rated Panels For mounting on gantry frame or gantry top Additional reinforcements on the back Multiple folded at sides rations: 9.2 x 9.2 Pitch: 38.1 To take energy accessories, hooks and holders To suit units 980 wide System width 991 W x H 991 x 457 Mounting kit 6 to mount Panel to the section upright CL Support Rail For mounting on gantry frame or gantry top Can be mounted on the crossbar For mounting plastic bins with mounting slot size 2001 and 2002 (see page 512) Natural anodised aluminium section Width CL CL Non-standard size - quote dimensions when ordering: x CL

1/4 Fully assembled 2 Mounting for right left CL 04 04 01 CL 04 04 02 Bottle holder For bottled drinks and Tetra-Paks

137 Chipline Compressed Air Units Mounted on narrow back panel or perforated panel Supply unit: Pressure regulator, filter, lubricator, inlet 1 x G 1/4, outlet 3 x G 1/4 Photo Distributor: Inlet 1 x G 1/4, outlet 2 x G 1/4 Fully assembled 2 Mounting for right left CL CL Bottle holder For bottled drinks and Tetra-Paks Material: Steel, zinc-coated - Mounting kit 8 Holder attachment to section upright CL

Chipline Turntable Without locking mechanism Stainless steel platter with ribbed rubber mat ESD version:conductive rubber mat and earthing lead Ø x H 380 x 20 500 x 20 ESD 380 x 20 500 x 20 With

20 Locking mechanism with detent pin at 45º intervals, turntable can also rotate freely Stainless steel platter with ribbed rubber mat ESD version: conductive surface and earth lead Ø x H Load

138 Chipline Turntable Without locking mechanism Stainless steel platter with ribbed rubber mat ESD version:conductive rubber mat and earthing lead Ø x H 380 x x 20 ESD 380 x x 20 With locking mechanism Load capacity kg Locking mechanism with detent pin at 45º intervals, turntable can also rotate freely Stainless steel platter with ribbed rubber mat ESD version: conductive surface and earth lead Ø x H Load capacity kg 380 x x 20 ESD 380 x x ESD Elastic wrist strap Adjustable with clasp Conductive fibres are woven into strap (no metal plate, anti-allergenic) Press-stud: 3 (internationally compatible) Highly elastic coil cord, length 2.4 m 1 MOhm resistor Press-stud 3/10 Earthing box Wrist strap with lead

Chipline Footrests Freestanding Footrest Angle can be adjusted from 0 to 20 Lever fixes footrest at desired angle With slip-resistant ribbed rubber mat 540 x 440 x 500 ESD 4 adjustable feet Area W x

139 Chipline Footrests Freestanding Footrest Angle can be adjusted from 0 to 20 Lever fixes footrest at desired angle With slip-resistant ribbed rubber mat 540 x 440 x 500 ESD 4 adjustable feet Area W x D 520 x x 440 x x 350 Support area adjustable from in 25 steps ESD version: conductive surface and earth lead Insertable Footrest Inserted into connection member Angle can be adjusted from 0 to 20 Lever fixes footrest at desired angle With slip-resistant ribbed rubber mat Made from sheet steel W x D x H 545 x 350 x 422 ESD Area W x D 520 x x 350 x x

Chipline Swivel Arms - Complete Models Rotating and inclinable shelves Includes rear frame upright with swivel arm and accessory mount Rotates through 360º, infinitely adjustable angle 0º - 45º,

315 x 405 x 30 121 02 128.** 415 x 305 x 30 121 02 127.** ESD 315 x 405 x 30 121 02 128.20 415 x 305 x 30 121 02 127.

140 Chipline Swivel Arms - Complete Models Rotating and inclinable shelves Includes rear frame upright with swivel arm and accessory mount Rotates through 360º, infinitely adjustable angle 0º - 45º, locked in position with clamping lever Ideal for use with Euro boxes 400 x swivel joints Front upstand Load capacity: 25 kg ESD version: conductive powder-coating and earthing lead W x D x H 315 x 405 x ** 415 x 305 x ** ESD 315 x 405 x x 305 x Mounting Kit 5 To fit rear frame upright to section upright CL Rotating and inclinable tray Includes rear frame upright with swivel arm and accessory mount Rotates through 360º, infinitely adjustable angle 0º - 45º, locked in position with clamping lever Ideal for use with Euro boxes x swivel joints All-round upstand Load capacity: 25 kg ESD version: conductive powder-coating and earthing lead W x D x H 610 x 410 x ** ESD 610 x 410 x Mounting Kit 5 To fit rear frame upright to section upright CL

Chipline Swivel Arms - Complete Models Computer shelves Includes rear frame upright and accessory mount Rotates through 360º Load capacity: 25 kg TFT Display Holder 3 swivel joints All-round upstand

20 - Mounting Kit 5 To fit rear frame upright to section upright CL 90 01 05 Includes rear frame upright and accessory mount Infinitely adjustable 0 15º, secured in position by clamping lever Load

141 Chipline Swivel Arms - Complete Models Computer shelves Includes rear frame upright and accessory mount Rotates through 360º Load capacity: 25 kg TFT Display Holder 3 swivel joints All-round upstand ESD version: conductive powder-coating and earthing lead W x D x H 500 x 400 x ** ESD 500 x 400 x Mounting Kit 5 To fit rear frame upright to section upright CL Includes rear frame upright and accessory mount Infinitely adjustable 0 15º, secured in position by clamping lever Load capacity: 25 kg Mounting options: VESA 75 x 75 and VESA 100 x 100 Info W x D x H 335 x 110 x ** ESD 335 x 110 x Mounting Kit 5 To fit rear frame upright to section upright Keyboard and mouse rest - see page 684 CL Holding frame Includes rear frame upright and accessory mount Rotates through 360º Double-sided Load capacity: 25 kg ESD version: conductive powder-coating and earthing lead W x D x H 690 x 50 x ** ESD 690 x 50 x Mounting Kit 5 To fit rear frame upright to section upright CL

Chipline for Holding Frame Shelves for holding frame perforated panel for holding frame Adjustable depth

W x D x H 605 x 305 x 48 Adjustment Depth 100 121 02 118.20 605 x 405 x 48 200 121 02 119.

512) ESD version (as standard): conductive powder-coating W x D x H 630 x 27 x 65 080 13 980.

142 Chipline for Holding Frame Shelves for holding frame perforated panel for holding frame Adjustable depth and angle Height adjustable in 25 steps Angles 0º 30º ESD version (as standard): conductive powder-coating W x D x H 605 x 305 x 48 Adjustment Depth x 405 x Height adjustable in 25 steps ESD version (as standard): conductive powder-coating W x D x H 630 x 9 x Bin rail for holding frame Height adjustable in 25 steps For 6 plastic bins 2001, 2001B, 2002 (see page 512) ESD version (as standard): conductive powder-coating W x D x H 630 x 27 x Rack for holding frame Height adjustable in 25 steps For 12 plastic bins 2001, 2001B, 2002 (see page 512) ESD version (as standard): conductive powder-coating W x D x H 634 x 141 x ** Colour information - see cover 677

Chipline Parts for Swivel Arms Rear frame upright with swivel arm For kitting with holding frame and accessory mounts 1 swivel joint ESD version:

** Rear frame upright ESD (requires earthing lead not supplied) 50 x 350 x 180 080 10 100.

143 Chipline Parts for Swivel Arms Rear frame upright with swivel arm For kitting with holding frame and accessory mounts 1 swivel joint ESD version: conductive powder-coating W x D x H Rear frame upright 50 x 350 x ** Rear frame upright ESD (requires earthing lead not supplied) 50 x 350 x Earthing lead Mounting Kit 5 To fit rear frame upright to section upright CL Swivel arm extension To extend the rear frame upright with swivel arm 1 swivel joint ESD version (as standard): conductive powder-coating W x D x H 300 x 50 x

standard): conductive powder-coating Usable height W x D x H 400 (double sided) 690 x

144 Chipline Parts for Swivel Arms Holding frame for swivel arm For mounting on the swivel arm Additional swivel joint Rotates through 360º Double-sided ESD version (as standard): conductive powder-coating Usable height W x D x H 400 (double sided) 690 x 50 x Info for holding frame - see page 677 ** Colour information - see cover 679

Chipline Accessory mount and accessories Accessory mount for swivel arm For mounting on the swivel arm Additional swivel joint Rotates through

20 Infinitely adjustable 0º 45º Ideal for use with Euro boxes 400 x 300 Mounted on the accessory mount ESD version (as standard): conductive

20 Inclinable tray for accessory mount Infinitely adjustable 0º 45º, locked in position with clamping lever Ideal for use with Euro boxes x

145 Chipline Accessory mount and accessories Accessory mount for swivel arm For mounting on the swivel arm Additional swivel joint Rotates through 360º ESD version (as standard): conductive powder-coating Inclinable shelves for accessory mount W x D x H 300 x 50 x Infinitely adjustable 0º 45º Ideal for use with Euro boxes 400 x 300 Mounted on the accessory mount ESD version (as standard): conductive powder-coating W x D x H 315 x 405 x x 305 x Inclinable tray for accessory mount Infinitely adjustable 0º 45º, locked in position with clamping lever Ideal for use with Euro boxes x 400 (please order Euro boxes separately see page 288) All-round upstand Mounted on the accessory mount ESD version (as standard): conductive powder-coating W x D x H 610 x 410 x

Chipline for accessory mount IT shelf for accessory mount

version (as standard): conductive powder-coating W x D x H

20 Keyboard rest / Mouseboard 1 Keyboard rest accepts a

146 Chipline for accessory mount IT shelf for accessory mount Mounted on the accessory mount Rotates through 360º ESD version (as standard): conductive powder-coating W x D x H 500 x 400 x Keyboard rest / Mouseboard 1 Keyboard rest accepts a standard PC keyboard rest for IT accessories (mouse, memory card reader etc.) ESD version (as standard): conductive powder-coating 2 Fig. 1 2 W x D x H Keyboard rest 490 x 212 x rest 490 x 212 x

147 Chipline for accessory mount TFT Monitor holder for accessory mount Infinitely adjustable ±15, secured with clamping lever Mounted on the accessory mount ESD version (as standard): conductive powder-coating W x D x H 355 x 92 x Keyboard and mouse tray for TFT monitor holder For mounting on TFT monitor holder ESD version (as standard): conductive powder-coating Made from sheet steel W x D x H 650 x 250 x

148 Chipline Instruction sheet holder With 10 clear A4 wallets with frame (5 red, 5 black) With 10 plastic tabs and blank labels For mounting on the frame Dimension Height Mounting Kit 4 To fit instruction sheet holder to section upright CL

Chipline Suspended These cabinets are suspended from the C-section stringer (pair) Central lock with push-in cylinder - keyed differently as standard Load capacity: 30 kg per drawer Telescopic slide:

149 Chipline Suspended These cabinets are suspended from the C-section stringer (pair) Central lock with push-in cylinder - keyed differently as standard Load capacity: 30 kg per drawer Telescopic slide: 100% extension ESD version: Conductive powder-coating, drawer contact spring and earthing lead Internal drawer dimensions: width 289 x depth 431 W x D x H front height B x 500 x ESD B x 500 x Mounting Kit 9 To fit suspended drawer cabinet to stringers ** CL W x D x H front height B x 500 x x 125 ESD B x 500 x x ** Mounting Kit 9 Internal drawer dimensions: width 289 x depth 431 To fit suspended drawer cabinet to stringers CL W x D x H front height B x 500 x x 125, 1 x 250 ESD B x 500 x x 125, 1 x ** Mounting Kit 9 To fit suspended drawer cabinet to stringers CL Internal drawer dimensions: width 289 x depth

Chipline Suspended W x D x H 360 x 500 x 575 front height 4 x 125 B-4 ESD B-4 350 x 500 x 575 4 x 125 - Mounting Kit 9 To fit suspended drawer cabinet to stringers 100 09 005.** 100 09 009.

suspended drawer cabinet to stringers 100 09 003.** 100 09 010.

150 Chipline Suspended W x D x H 360 x 500 x 575 front height 4 x 125 B-4 ESD B x 500 x x Mounting Kit 9 To fit suspended drawer cabinet to stringers ** CL Internal drawer dimensions: width 289 x depth 431 W x D x H front height S x 500 x x 125, 1 x 375 ESD S x 500 x x 125, 1 x Mounting Kit 9 To fit suspended drawer cabinet to stringers ** CL Internal drawer dimensions: width 147 x depth 442 W x D x H front height S x 500 x x 125 ESD S x 500 x x Mounting Kit 9 To fit suspended drawer cabinet to stringers ** CL Internal drawer dimensions: width 147 x depth 442 ** Colour information - see cover 685

Chipline Assembly s Workbench Fixed height Base made from natural anodised aluminium section 40 x 40 4 adjustable feet to deal with uneven floors Non-standard sizes available Worktop not included

151 Chipline Assembly s Workbench Fixed height Base made from natural anodised aluminium section 40 x 40 4 adjustable feet to deal with uneven floors Non-standard sizes available Worktop not included please order separately, see following pages Width Base height Non-standard Size Base height Width Depth CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Depth CL Base height 860 Depth Width CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Non-standard Size Base height Width Depth CL

152 Chipline Assembly s Worktops Melamine faced Material: Chipboard Top surface: Melamine faced to DIN Bottom surface: Melamine faced to DIN Edges: Colour: Surface data: 3 ABS edges antistatic, rounded radius R3 light grey Melamine laminated to DIN 68765, partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) Width Thickness Non-standard Size Thickness 40 Width Depth CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Depth CL

153 Chipline Assembly s Worktops Laminate faced Material: Chipboard Top surface: HPL laminate 0.8 to DIN EN 438 Bottom surface: HPL laminate surface layer Edges: Colour: Surface data: 3 ABS edges antistatic, rounded radius R3 light grey High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Width Thickness Non-standard Size Thickness 40 Width Depth CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Depth CL

Chipline Assembly s Worktops Solid Beech Material: Solid beech Top surface: 2 coats of polyurethane varnish Bottom surface: 1 coat of polyurethane varnish Colour: Surface data: Natural beech Surface

154 Chipline Assembly s Worktops Solid Beech Material: Solid beech Top surface: 2 coats of polyurethane varnish Bottom surface: 1 coat of polyurethane varnish Colour: Surface data: Natural beech Surface resistant to water, oils, acids and chemicals, dovetailed joints for high load capacity Width Thickness Non-standard Size Thickness 40 Width Depth CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Depth CL

155 Chipline Assembly s Worktops Melamine faced ESD For electrostatically sensitive components Material: Chipboard, conductive Top surface: Melamine faced, conductive to DIN Bottom surface: Melamine faced, conductive to DIN Edges: Colour: Surface data: 3 ABS edges antistatic, rounded radius R3 light grey Leakage values: according to IEC Melamine faced, conductive to DIN 68765, partially scratch and impact resistant, resistant to staining by substances belonging to groups 1 and 2 to DIN (e.g. acetone, alcohol, petroleum ether, nail varnish remover, organic solvents) Width Thickness Non-standard Size Thickness 40 Width Depth CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Depth CL

Chipline Assembly s Worktops Laminate faced ESD For electrostatically sensitive components Material: Chipboard, conductive Top surface: HPL laminate 0.

abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Width Thickness 40 1000 1100 1200 1300

156 Chipline Assembly s Worktops Laminate faced ESD For electrostatically sensitive components Material: Chipboard, conductive Top surface: HPL laminate 0.8, conductive to DIN EN 438 Bottom surface: Edges: Colour: Surface data: HPL laminate surface layer 3 ABS edges antistatic, rounded radius R3 light grey Leakage values: according to IEC High abrasion resistance, high impact and scratch resistance, resistant to boiling water, resistant to normal household chemicals, solvents, weak acids and alkalis Width Thickness Non-standard Size Thickness 40 Width Depth CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL Depth CL

157 Chipline Sitting and Standing s Technical Data Huge adjustment range from 650 to 1300 Height adjustment with 4 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) Non-standard sizes available

Chipline Sitting and Standing s Sitting and Standing Height Adjustment with Electric Motor Working height infinitely adjustable from 650 to 1300 Infinitely variable height adjustment with 2 parallel

158 Chipline Sitting and Standing s Sitting and Standing Height Adjustment with Electric Motor Working height infinitely adjustable from 650 to 1300 Infinitely variable height adjustment with 2 parallel controlled linear drives and control panel (3 working heights can be stored in the memory) Digital display for working height Base in natural anodised aluminium section 4 adjustable feet to deal with uneven floors Maximum UDL: 350 kg Worktop not included please order separately (dimensions W 1500 x D 750 only) W x D 1500 x 750 CL Non-standard size - quote dimensions when ordering: x CL

Chipline Assembly Trolleys Technical Data Base unit made from natural anodised aluminium section 40

100 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the

using a 30 thick worktop Maximum total load capacity per trolley: 210 kg Higher loads on request

159 Chipline Assembly Trolleys Technical Data Base unit made from natural anodised aluminium section 40 x 40 4 x dia. 100 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Can be fitted with worktop, intermediate and base shelves Fixed working height 780 when using a 30 thick worktop Maximum total load capacity per trolley: 210 kg Higher loads on request Base unit - kitting variants Kitted with worktop and base shelf Kitted with worktop and "standard" intermediate shelf max. load capacity 40 kg per intermediate shelf Kitted with worktop and intermediate shelf "with stringer" max. load capacity 80 kg per intermediate shelf Product Benefits Flexible material provision Individual kitting options Non-standard sizes available 694

160 Chipline Assembly Trolleys Base Frame Base unit made from natural anodised aluminium section 40 x 40 4 x dia. 100 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Worktop, intermediate shelf and base shelf are not supplied please order separately (see pages ) Fixed working height 780 when using a 30 thick worktop Maximum total load capacity per trolley: 210 kg Higher loads on request W x D x H x 400 x 780 CL x 400 x 780 CL x x 780 CL ESD x 400 x 780 CL x 400 x 780 CL x x 780 CL Non-standard size - quote dimensions when ordering: x x CL

161 Chipline Assembly Trolleys Worktops Melamine Faced Worktop S 30 Intermediate shelf S 30 Base shelf S 20 W x D x x x Non-standard Size: CL CL CL x CL W x D 510 x x x 590 Non-standard Size: Standard CL CL CL Stringer CL CL CL x CL CL W x D x x x Non-standard Size: CL CL CL x CL Worktops laminate faced Worktop S 30 Intermediate shelf S 30 Base shelf S 20 W x D x x x Non-standard Size: CL CL CL x CL W x D 510 x x x 590 Non-standard Size: Standard CL CL CL Stringer CL CL CL x CL CL W x D x x x Non-standard Size: CL CL CL x CL Worktops beech multiplex Worktop S 30 Intermediate shelf S 30 Base shelf S 20 W x D x x x CL CL CL W x D 510 x x x 590 Standard CL CL CL Stringer CL CL CL W x D x x x CL CL CL Non-standard Size: x CL Non-standard Size: x CL CL Non-standard Size: x CL

Chipline Assembly Trolleys Worktops melamine faced ESD Worktop S 30 Intermediate shelf S 30 Base shelf S 20 W x D x 400 800 x 400 800 x Non-standard Size: CL 02 16 01 CL 02 16 02 CL 02 16 03 x CL 02

162 Chipline Assembly Trolleys Worktops melamine faced ESD Worktop S 30 Intermediate shelf S 30 Base shelf S 20 W x D x x x Non-standard Size: CL CL CL x CL W x D 510 x x x 590 Non-standard Size: Standard CL CL CL Stringer CL CL CL x CL CL W x D x x x Non-standard Size: CL CL CL x CL Worktops laminate faced ESD Worktop S 30 Intermediate shelf S 30 Base shelf S 20 W x D x x x Non-standard Size: CL CL CL x CL W x D 510 x x x 590 Non-standard Size: Standard CL CL CL Stringer CL CL CL x CL CL W x D x x x Non-standard Size: CL CL CL x CL W x D x x x Non-standard Size: Worktops solid beech Beech multiplex Worktop S 30 Intermediate shelf S 30 Base shelf S 20 CL CL CL x CL W x D 510 x x x 590 Non-standard Size: Standard CL CL CL Stringer CL CL CL x CL CL W x D x x x Non-standard Size: CL CL CL x CL

Chipline Material Trolleys Technical Data Base unit made from natural

swivelling movement of the castors Can be kitted with top support rail,

trolley: 180 kg Higher loads on request Base unit - kitting variants Kitted

with inclinable metal shelf and inclinable metal tray Product Benefits

163 Chipline Material Trolleys Technical Data Base unit made from natural anodised aluminium section 40 x 40 Optional trolley heights 1050 and x dia. 100 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Can be kitted with top support rail, metal shelf, metal tray and shelf level Maximum total load capacity per trolley: 180 kg Higher loads on request Base unit - kitting variants Kitted with shelf level and base shelf Kitted with inclinable metal trays Kitted with inclinable metal shelf and inclinable metal tray Product Benefits Flexible material provision Individual kitting options Can be kitted with comprehensive Chipline accessories Non-standard sizes available 698

Chipline Material Trolleys Base Frame Base unit made from natural anodised aluminium section 40 x 40 Optional trolley heights 1050 and 1400 4 x dia.

164 Chipline Material Trolleys Base Frame Base unit made from natural anodised aluminium section 40 x 40 Optional trolley heights 1050 and x dia. 100 swivel castors of which 2 have brakes that block both the rolling and swivelling movement of the castors Can be kitted with top support rail, metal shelf, metal tray and shelf level Maximum total load capacity per trolley: 180 kg Higher loads on request W x D x H 700 x 550 x 1050 CL x 550 x 1400 CL ESD 700 x 550 x 1050 CL x 550 x 1400 CL Non-standard size - quote dimensions when ordering: x CL

Chipline Material Trolleys Inclinable metal tray 20 all-round upstand Infinitely variable angle from 0 90 Secured with clamping levers Maximum UDL: 50 kg ESD version: conductive powder-coating W x D

165 Chipline Material Trolleys Inclinable metal tray 20 all-round upstand Infinitely variable angle from 0 90 Secured with clamping levers Maximum UDL: 50 kg ESD version: conductive powder-coating W x D 620 x 450 CL Shelf level To mount on support section In natural anodised section frame 40 x 40 Maximum UDL: 60 kg Melamine faced Thickness 20 Laminate faced 20 Beech multiplex 20 ESD Melamine faced 20 Laminate faced 20 W x D x H 620 x 500 x x 500 x 40 CL CL CL ESD CL CL Adjustable metal shelf 20 all-round upstand Infinitely variable angle from 0 90 Secured with clamping levers Maximum UDL: 50 kg ESD version: conductive powder-coating W x D 616 x x 500 CL CL

Chipline Material Trolleys Support Rail Natural anodised aluminium section For mounting plastic bins with mounting slot size 2001 and 2002 (see page 512) Incl.

166 Chipline Material Trolleys Support Rail Natural anodised aluminium section For mounting plastic bins with mounting slot size 2001 and 2002 (see page 512) Incl. crossbar Crossbar Dimension Length single-sided use CL double-sided use CL Made from natural anodised aluminium section 40 x 40 Integral connectors Provides additional reinforcement Dimension Width 620 CL Base shelf Mounted in lower frame Melamine faced Thickness 20 Laminate faced 20 Beech multiplex 20 Melamine faced 20 Laminate faced 20 W x D x H 620 x 470 x x 470 x 20 CL CL CL ESD CL CL

Perfo. Kits Perfo Accessories (without perforated panels) Kits Perfo Accessories (with perforated panels)

Perfo. Kits Perfo Accessories (without perforated panels) Kits Perfo Accessories (with perforated panels) 482 Technical Information.......................... 484 48 Panels............................... 486 487 for rated Panels........... 488 0 Kits (without perforated panels). 02 07 Kits (with perforated