Uniclass L4181 EPIC D181. CI/ SfB (31.5) X. Centurion Range

Transcription

1 Uniclass L EPIC D Centurion Range CI/ SfB (.5) X

2 THE LAIDLAW SERVICE Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves. In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and AntiLigature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Timber Doorsets which are fully compatible with the Orbis range of architectural hardware. For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure. Specification Advice Laidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification. Product Development All products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation. Project Management Having provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules. CPD seminars Laidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 00 compliance. Packaging and Delivery Laidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber Doors. Laidlaw will ensure deliveries are made in full and on time.

3 CENTURION RANGE The products listed within this publication are subject to a 2 year guarantee against defects proved to be the result of faulty manufacture or defective materials. Extended guarantees can be obtained for specific projects on application via your Laidlaw Technical Consultant and subject to an agreed maintenance programme. Centurion Range Availability The Centurion Range is a selection of products developed by Laidlaw to meet the growing need for performance at a competitive price. The range is available from our trading branches across the UK. For larger project requirements, a door bagging service is available on this range subject to a surcharge. Ordering Products When ordering products from the catalogue remember to specify the finish code after the product code e.g LA02.5SS Dimensions All dimensions shown throughout this brochure are in mm. Materials & The range is available in Satin and Polished Stainless Steel, Satin and Polished Aluminium where stated. SS Satin Stainless Steel PS Polished Stainless Steel SA Satin Aluminium PA Polished Aluminium 2

4 CENTURION RANGE LEVER FURNITURE Lever Handle Rose Mounted Round bar return to door lever prefixed to a 0mm sprung rose Supplied with bolt through and face fixings Metal inner rose mm spindle supplied Conforms to the dimensional requirements of BS 00 for DDA applications SS & PS finishes are Grade 6 Ø L SS/PS SA LA LA Ø 0 5 L Lever Handle Rose Mounted Round bar return to door lever prefixed to a 5mm unsprung rose Supplied with bolt through and face fixings Metal inner rose mm spindle supplied Conforms to the dimensional requirements of BS 00 for DDA applications SS & PS finishes are Grade 6 Ø L SS/PS SA LA LA Ø 5 L Bathroom Indicator & Turns A rose mounted indicator & turn for use with bathroom locks Available in 0mm or 5mm rose depth Also available with an extended turn for the less able Each turn supplied with appropriate indicator Supplied with face fixings SS & PS finishes are Grade 6 LA.5 LA.5D Function Depth SS/PS SA LA.5 Standard turn 5 set LA Standard turn 0 set LA.5D Extended turn 5 set LAD Extended turn 0 set LA LAD Escutcheons A series of escutcheons with concealed fixings for use with rose mounted levers or pull handles Available in 0mm or 5mm depth Supplied with face fixings SS & PS finishes are Grade 6 LA7 LA7OV Function Depth SS/PS SA LA7 Euro profile 0 LA7.5 Euro profile 5 LA7OV Oval profile 0 LA7.5OV Oval profile 5 LA7LK Lever key 0 LA7.5LK Lever key 5 LA7BL Blank 0 LA7.5BL Blank 5 LA7BL LA7LK All dimensions are in mm Specify the finish code after each product code e.g LA0SS

5 CENTURION RANGE LEVER FURNITURE Lever Handles Rose Mounted A special edition series of stylish stainless steel lever handles on 6mm sprung rose. LA2 Description "Arched" straight lever 6 SS Levers are prefixed to the rose inner with push on rose covers to conceal fixings Available in Satin (SS) Polished (PS) finish available to order Supplied with bolt through back to back fixings and alternative face fixings All levers are Grade 6 stainless steel 60 LA5 0 Description "S" straight lever 6 SS 0 LA Description "Mitred" return to door lever SS 6 0 LA Description "T" straight lever SS 6 5 LA0 Description Straight round bar lever SS 6 5 LA Description "Mitred" straight lever SS All dimensions are in mm Specify the finish code after each product code e.g LA0SS

6 CENTURION RANGE LEVER FURNITURE Lever Handle Rose Mounted Round bar 'return to door' lever handle prefixed to a 0mm sprung rose Supplied with bolt through and face fixings Metal inner rose c/w rubber retaining ring mm spindle supplied Available in PA finish only Ø Ø L PA Finish L Lever Handle Backplate Mounted Finish Round bar 'return to door' lever handle prefixed to a 0mm backplate Supplied with bolt through and face fixings Metal inner plate mm spindle supplied Available in PA finish only Lever Ø Plate Function PA Blank Lever key (ccs) Oval cyl. (.5ccs) Euro cyl. (ccs) 5 79./7.5 9 Euro cyl. (7.5ccs) 5 79./5 9 Bath. set (ccs) Oval cyl. (56ccs) Finish Ø Lever Ø Plate Function PA Blank Lever key (ccs) Oval cyl. (.5ccs) Euro cyl. (ccs) / Euro cyl. (7.5ccs) /5 22 Bath. set (ccs) Oval cyl. (56ccs) Finish Lever Ø Plate Function PA Blank Lever key (ccs) Oval cyl. (.5ccs) 0 50 centres see below 0 0 Ø 5 Lever key Centres mm Oval cylinder Centres.5mm Centres 56mm Euro cylinder Centres 7.5mm Centres mm Bathroom set Centres mm 0 5

7 CENTURION RANGE LEVER FURNITURE Escutcheons A series of escutcheons with concealed fixings for use with rose mounted levers or pull handles Supplied with face fixings Available in PA finish only Finish Function Depth PA Blank Lever key Oval cylinder Euro cylinder 0 Bathroom Indicator & Turns A rose mounted indicator & turn for use with bathroom locks Extended turn for the less able Each turn supplied with appropriate indicator Supplied with face fixings Available in PA finish only Finish Function Depth PA Indicator 0 sets Standard turn 0 sets Extended turn 0 sets PA lever handles and LA502 lever lock Spindles & Fixings All lever and rose variants are supplied as standard with a spindle suitable for doors mm to 5mm thick. Levers can be supplied as half sets to order in addition to the following spindle options. LA5 LA5 LA52 LA50 Description Half spindle to operate Split spindle for locks with split follower Bolt through fixing pack for lever sets LA52 All dimensions are in mm Specify the finish code after each product code e.g LA0SS 6

8 CENTURION RANGE PULL HANDLES Pull Handles A series of round bar pull handles for bolt through fixing, or in s fixed back to back Supplied complete with fixings to suit timber doors Available in 9mm and 22mm diameters For push/pull applications select an appropriate push plate for the other side of the door (see page 9 for push plate details) SS & PS finishes are Grade 6 Pull handles of 50mm centres and above meet the requirements of BS 00 for DDA applications Spare bolt through fixing packs are available (see below) Face fixing roses also available (see below) Ø 5 Bolt Through Back to Back Ø Centres SS/PS SA LA27 LA LA LA LA0 LA LA LA LA Ø Centres SS/PS SA LA LA LA LA LA LA LA LA LA LA LA centres Pull Handle Roses Fixing pack to convert bolt through fixing pull handles to concealed fixing surface mounted pulls Available as 5mm or 0mm roses with concealed fixings Supplied complete with fixings for timber doors SS & PS finishes are Grade 6 Must be ordered to suit 9mm or 22mm pull handles 52Ø 5 or 0 Concealed Fix Roses Ø Depth SS/PS SA LA6 9 0mm LA7 22 0mm LA 9 5mm LA9 22 5mm Bolt Through Fixing Packs Ø LA5.9 LA5.22 Description M6 bolt pack for 9mm pulls (SS & PS only) M bolt pack for all 22mm, 25mm & 2mm diameter pulls & 9mm pulls in SA finish All dimensions are in mm Specify the finish code after each product code e.g LA0SS 7

9 CENTURION RANGE PULL HANDLES Pull Handles A series of round bar pull handles for bolt through fixing, or in s fixed back to back Supplied complete with M fixings to suit timber doors Available in 9mm, 22mm and 25mm diameters For push/pull applications select an appropriate push plate for the other side of the door (see page 9 for push plate details) Available in PA finish only Pull handles of 50mm centres meet the requirements of BS 00 for DDA applications Ø centres 5 Bolt Through Finish Ø Centres PA Back to Back Finish Ø Centres PA BB BB BB BB BB BB BB BB BB BB BB Pull Handles Face Fixed A series of round bar pull handles complete with rose mounting for face fixing Supplied complete with fixings to suit timber doors Available in 9mm, 22mm and 25mm diameters Available in PA finish only Pull handles of 50mm centres and above meet the requirements of BS 00 for DDA applications Covered rose conceals fixings Face Fixed Finish Ø Centres PA Ø 5 Fixing Packs A series of fixing packs are available for all of the above Centurion pull handles (see page 9 for details) centres 0 All dimensions are in mm Specify the finish code after each product code e.g LA0SS 52Ø

10 CENTURION RANGE PUSH PLATES & KICKING PLATES Push Plates Push plates for use with bolt through pull handles Square corners drilled & countersunk supplied complete with screws Plate thickness.5mm SS & PS finishes are Grade 0 Push Plates Size (mm) SS/PS SA LA2 0 x 75 LA x 75 LA x 75 Push Plates Size (mm) PA x x x x 75 "PUSH" Kicking Plates Kicking plates specify size required Square corners drilled & countersunk supplied complete with screws Plate thickness.5mm SS & PS finishes are Grade 0 Kicking Plates Size (mm) To order SS/PS SA Pull Handle Fixings As standard, bolt through handles are supplied with fixings FPP and back to back handles are supplied with fixing pack FPP5 to suit up to 55mm thick doors. Alternative sizes and fixing types are also available. FPP Bolt through fixing for timber doors with CSK M bolts FPP5 Back to back fixing for timber doors 5 55mm. FPP6 Back to back fixing for glass doors with nylon bush and washers. FPP7 Bolt through fixing for glass doors with 'Pig nosed' bolt. Pull Handle Fixings FPP FPP5 FPP6 Note All bolts are M. Clearance hole for glass door fixings mm Ø FPP7 Please contact your Laidlaw Technical Consultant for full details of variations available. glass doors 0 mm glass doors 0 mm 9

11 CENTURION RANGE FINGER PULLS Flush Pulls For sliding doors, or where a minimum projection is required, a recessed flush pull can be used Dimensions SS/PS SA LA27 00 x 50 x 2mm LA2 75mm Ø x mm LA27 is "screw fixed" LA2 is "pin fixed" SS & PS finishes are Grade 0 LA2 LA27 Cylinder Pulls A series of cylinder pulls for use with cylinder nightlatches and deadlocks Thickness of pull 2mm SS & PS finishes are Grade 0 LA9 LA2 LA25 Function SS/PS SA/PA LA9 Euro profile LA2 Lever key LA25 Oval profile LA26 Blank LA26. Rim cylinder LA26 LA26. Concealed Door Closer Mounted in the hinge edge of the door and frame. Used for lightweight doors. Description PB NP 7 Concealed door closer Solid construction Fully hidden when the door is closed Adjustable spring strength Suitable for use on lightweight or medium weight internal doors up to 50kg Supplied c/w screws and fitting instructions This product has been included in a successful 0 minute fire test to BS76 Part 22:

12 CENTURION RANGE DOOR CLOSERS Overhead Door Closers A series of CE marked surface mounted overhead door closers with an all over cover concealing all fixings and adjustment screws. The range provides the following features (see table below): CE marked, suitable for fire door applications Fully certified to EN5, EN6, CE Marked and Certifire Approved CF Adjustable closing force Adjustable closing speed Latch action Adjustable backcheck Reversible for LH & RH applications Flat form arms Suitable for fig., fig.6 & fig.66 mounting Available in SS, PS & SA finishes Hold open arm packs available for some models (not suitable for fire doors) 72mm (LA90,9/92) LA90; LA9 & LA92 A series of closers designed to provide a midrange product with the choice of the most popular options, in a concise, costeffective package. The main features of this series include full certification to EN5, EN6, CE Marked and Certifire Approved CF See product selector table below for full range of features BS EN Classifications The following closers have been designated with the Classification number as shown below. LA90 LA9 LA mm (LA90/LA9) 60mm (LA92) 25mm (LA90/LA9); 07mm (LA92) Centurion closers have metallic plated finishes with arms and brackets to match. PS Polished Stainless Steel SS Satin Stainless Steel SA Silver Sprayed Features & Functions LA90 Power size (see chart on page 2) 2 Fixed power or adjustable Template** or spring power adjustable BS EN 5 compliant & CE Marked adjustable template Grade of opening angle (see note #) LA9 2 adjustable spring LA adjustable spring LA7 2 6 adjustable spring Adjustable closing speed Adjustable latch action Adjustable back check Hold open armset option Fire tested to EN 6 2 hour Fire tested to EN 6 hour ** by altering the mounting position of the closer, the closing strength can be adjusted # Grade will close a door from 0 opening angle. Grade will close a door from 05 opening angle max. projection 0mm mm min. 0mm min. 0mm min. LA 2 adjustable spring Adjustable delayed action All dimensions are in mm Specify the finish code after each product code e.g LA0SS fig. Applications for LA90, LA9 & LA92 fig. 66

13 CENTURION RANGE DOOR CLOSERS Overhead Door Closers A series of CE marked surface mounted overhead slide track door closers with an all over cover concealing all fixings and adjustment screws. These closers have the following features: CE marked, suitable for fire door applications Fully certified to EN5, EN6, CE Marked and Certifire Approved CF Fixed or adjustable closing force versions Adjustable closing speed and latch action Adjustable backcheck Reversible for LH & RH applications Slide track and arm in matching finish Available in SS, PS & SA finishes (LA90.0) 7 (LA92.0) 0 25mm (LA90.0) 07mm (LA92.0) 50 (LA90.0) 60 (LA92.0) Features & Functions LA90.0 LA92.0 Power size (see chart opposite) 2 Fixed power or adjustable fixed Body size (W x H x D) 207 x 60 x.5 BS EN 5 compliant & CE Marked Grade of opening angle (see note #) adjustable 297 x 60 x Adjustable closing speed Adjustable latch action Adjustable back check Fire tested to EN 6 2 hour BS EN Classifications The following closers have been designated with the Classification number as shown below. LA90.0 LA # Grade will close a door from 0 opening angle. Grade will close a door from 05 opening angle Centurion closers have metallic plated finishes with arms and brackets to match. PS Polished Stainless Steel SS Satin Stainless Steel SA Silver Sprayed BS EN 5 Power size Door width (mm) Door weight (kg) 20kg 2 0kg 60kg 0kg 5 00kg 6 20kg 750mm 50mm 950mm 00mm 250mm 00mm Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig. applications) only. 2

14 CENTURION RANGE DOOR CLOSERS Overhead Door Closers A series of CE marked surface mounted overhead door closers with an all over cover concealing all fixings and adjustment screws. The range provides the following features Fully certified to EN5, EN6, and CE Marked Adjustable closing force Adjustable closing speed Latch action Adjustable backcheck Adjustable delayed action Reversible for LH & RH applications Flat form arms Suitable for fig., fig.6 & fig.66 mounting Available in SS, PS & SA finishes See product selector table on page for full range of features LA Selection advice Fixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions variables that may be unknown at the time of specification. Specifying an adjustable closer can help to avoid installing an underpowered or overpowered unit and help service providers meet the requirements for DDA applications. BS EN 5 Power size Door width (mm) Door weight (kg) 20kg 2 0kg 60kg 0kg 5 00kg 6 20kg 750mm 50mm 950mm 00mm 250mm 00mm Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig. applications) only. Centurion closers have metallic plated finishes with arms and brackets to match. PS Polished Stainless Steel SS Satin Stainless Steel SA Silver Sprayed BS EN Classifications The following closers have been designated with the Classification number as shown below. LA LA LA All dimensions are in mm Specify the finish code after each product code e.g LA0SS

15 CENTURION RANGE DOOR CLOSERS Overhead Door Closers A series of CE marked surface mounted overhead closers with trimplate. These closers have the following features: CE marked, suitable for fire door applications Fully certified to EN5, EN6, CE Marked and Certifire Approved CF277 Adjustable closing speed and latch action Optional delayed action Polished anodised aluminium body and matching arms only 600 BS EN Classifications The following closers have been designated with the Classification number as shown below ( 600 & 60) 20 ( 602) 2 5 ( 600 & 60) 60 ( 602) ( 600 & 60) 5 ( 602) Overhead Door Closer An economic but fully functional overhead door closer. This closer has the following features: CE marked, suitable for fire door applications Fully certified to EN5, EN6, CE Marked and Warrington Certification 2CPDAD006 Fixed power size suitable for doors up to 60kg and 950mm wide (see chart on page ) Adjustable closing speed and latch action Simple installation and adjustment Sprayed silver finish with other colours available (please contact your Laidlaw Consultant for details) 755 Features & Functions BS EN Classifications The following closers have been designated with the Classification number as shown below Power size (see chart opposite) Fixed power or adjustable adjustable adjustable adjustable fixed Power adjustment by position or spring position spring spring n/a BS EN 5 compliant & CE Marked Projecting arm (P) or Track arm (T) Grade of opening angle (see note #) P Adjustable closing speed Adjustable latch action Adjustable back check Adjustable delayed action Fire tested to EN 6 on timber door 2 hour 2 hour 2 hour 2 hour IFC Approved Certifire Approved Warrington Certification P P P # Grade will close a door from 0 opening angle. Grade will close a door from 05 opening angle

16 CENTURION RANGE FLOOR SPRING Floor Springs Suitable for heavy duty applications on or double action doors up to 00kg. Features include: CE marked suitable for fire door applications Fixed strength size Adjustable closing speed Large range of adjustment Supplied complete with top centre, bottom strap and satin stainless steel cover plate Single action and double action variants Power size CE marked adjust. speed action double action LA7 Fixed power size LA75 Fixed power size BS EN Classifications The following floor springs have been designated with the Classification number as shown below. LA7 LA75 Door width (mm) Door weight (kg) 750mm 50mm 950mm 00mm 250mm 00mm BS EN 5 Power size 20kg 2 0kg 60kg 0kg 5 00kg 6 20kg Power sizes Centurion floor springs are fixed power size. See chart above for suitable door applications. For doors outside these parameters please contact your Laidlaw Technical Consultant or nearest Sales Office for guidance. 5

17 CENTURION RANGE LOCKCASES & CYLINDERS Euro Profile Mortice Lockcases An integrated series of modular euro profile cylinder mortice lockcases designed to meet the requirements of BS EN 2209 Slimline case with 6 function variants Modular design allows interchangeability of lock models Meets the requirements of BS EN2209 and with the dimensional characteristics of DIN25 60mm backset (Escape sashlock 55mm backset) 72mm Euro profile centres 7mm bathroom centres Bolt through hardware fixings 20mm double throw deadbolt Quick reversible latchbolt Springing suitable for unsprung lever furniture Single piece forend in grade 0 stainless steel with matching strike plate Optional radiused or square forend styles Meets BS 00 dimensional recommendations making it suitable for DDA applications Nightlatch function without holdback facility Rebate kits available, see page 7 Fire Door Applications When used on fire doors, intumescent packs need to be specified IP L For all lock cases except LA65 & LA65R IP L2 For LA65 & LA65R For 0 min fire door applications specify pack per lockcase. For 60 min fire door applications specify 2 packs per lockcase LA62R , LA6R LA62 62R Radiused forend Function LA60R Sashlock LA6R Deadlock LA62R Latch LA6R Bathroom lock LA6R Nightlatch* LA65R Escape sashlock Square forend Function LA60 Sashlock LA6 Deadlock LA62 Latch LA6 Bathroom lock LA6 Nightlatch* LA65 Escape sashlock * without holdback function ,5 6 7 SS SA SS 65 SA Cylinders A series of euro profile and oval profile cylinders to suit both European and UK lock cases Euro profile and oval cylinders are available as standard differ Choice of cylinder lengths to suit different door and hardware thicknesses Satin nickel plated finish Supplied with keys All dimensions are in mm Specify the finish code after each product code e.g LA0SS Cylinder type Length LA200E.0.NP Euro cylinder 0mm LA200E.5.NP Euro cylinder 5mm LA20E.60.NP LA20E.70.NP LA20E.0.NP LA202E.60.NP LA202E.70.NP LA202E.0.NP LA200O.0.NP LA200O.5.NP LA20O.60.NP LA20O.70.NP LA20O.0.NP LA202O.60.NP LA202O.70.NP LA202O.0.NP LA20 LA20 Euro cylinder & turn Euro cylinder & turn Euro cylinder & turn Euro double cylinder Euro double cylinder Euro double cylinder Oval cylinder Oval cylinder Oval cylinder & turn Oval cylinder & turn Oval cylinder & turn Oval double cylinder Oval double cylinder Oval double cylinder Rim cylinder Rim mortice cylinder 60mm 70mm 0mm 60mm 70mm 0mm 0mm 5mm 60mm 70mm 0mm 60mm 70mm 0mm n/a n/a 6

18 CENTURION RANGE LOCKCASES & REBATE SETS Lockcases UK Style A series of UK style mortice cylinder lockcases in 6mm and 76mm case sizes Two part forend Brass deadbolt with hardened steel 'antisaw' rollers Suitable for bolt through lever assemblies Forends and strikes are satin zinc plated finish or satin stainless steel only N.B: Radius deadbolt is not available on Oval profile lockcases and therefore rebate kits are not available to suit LA2SZ LASZ LA0SZ Function LA6SZ Latch 6 LA7SZ Latch 76 LA0SZ Euro sashlock 6 LASZ Euro sashlock 76 LA6SZ Oval sashlock 6 LA7SZ Oval sashlock 76 LA2SZ Euro deadlock 6 LASZ Euro deadlock 76 LASZ Oval deadlock 6 LA9SZ Oval deadlock 76 LASZ Euro nightlatch 6 LA9SZ Euro nightlatch 76 LASZ Bathroom lock 6 LA5SZ Bathroom lock 76 A Dimensions B C LA50SS Bathroom deadbolt 79 A 25 A C B B Rebate Sets for Cylinder Locks A rebate set will convert the meeting stiles of a rebated of doors so that the standard mortice lock can be used. Available in mm and 25mm rebate depths where stated Steel strikes satin nickel plated finish Suitable for square forend locks only LA60. LA0. LA2. Rebate Sets Lock reference: LA60, LA62, LA6, LA6, LA65 LA6 LA6, LA7, LA, LA9, LA0, LA, LA, LA5, LA02, LA0, LA502, LA50 LA2, LA LA2, LA LA52, LA5 mm rebate LA60. LA6. LA0. LA2. 25mm rebate LA60.25 LA6.25 n/a n/a Please Note: LA0. and LA2. are only compatible with locks with radiused deadbolts 7

19 CENTURION RANGE LOCKCASES Lockcases 5 Lever Locks A series of UK style mortice 5 Lever lockcases in 6mm and 76mm case sizes Tested and approved to BS Twin hardened rollers Hardened steel AntiDrill plates on the lock case 00 key differs AntiTamper levers Reversible latch 20mm throw deadbolt Supplied with 2 keys Rebate kits available (see page 7) LA52SS LA502SS LA50SS Function A LA502SS 5 Lever Sashlock 67 LA52SS 5 Lever Deadlock 67 LA50SS 5 Lever Sashlock 79 LA5SS 5 Lever Deadlock 79 Dimensions B.5.5 C Lockcases Lever Locks A series of UK style mortice Lever lockcases in 6mm and 76mm case sizes Residential Lever lock cases Minimum key differs Heavy sprung Supplied with 2 keys Rebate kits available (see page 7) LA2SS LA02SS LA0SS Function A LA02SS Lever Sashlock 67 LA2SS Lever Deadlock 67 LA0SS Lever Sashlock 79 LASS Lever Deadlock 79 Dimensions B.5.5 C A 25. A C 0 5 B B All dimensions are in mm Specify the finish code after each product code e.g LA0SS

20 CENTURION RANGE LATCHES & ACCESSORIES Latches A series of tubular, mortice or roller latches for timber doors 700 Steel case assembly zinc coated Easy fit using 22mm dia. drill bit mm follower 70 available with square or radius forend mm follower LA5 Nylon roller Steel case Electroplated brass or Nickel plated forends LA5 70 Case size (mm) Description R Tubular latch SNP finish Mortice latch SS finish Mortice latch Radius forend LA5 Roller catch EB or NP finish not applicable Specific rebate sets are available to suit latches 700 and 70 Rebate size mm 25mm To suit tubular latch 700 To suit mortice latch 70 To suit mortice latch 70R LA700. LA70. LA70.R LA LA70.25 LA70.25R 700 Mortice Budget Lock Supplied complete with "T" Key Mortice Budget Lock Description BZP SA LA5 Mortice type c/w key 90 5 BZP Bright Zinc Plated 2 Flush Bolt Lever action flush bolt 25 Flush Bolt Size SS/PS SA LA5 200 x 25mm 200 Door Stops A range of floor, skirting and wall mounted door stops Skirting mounted door stops in varying lengths Floor mounted door stop See chart opposite for finishes Door Stops Description LA2 Wall mounted (5mm) SS & PS Wall mounted (6mm) Wall mounted (76mm) Floor mounted PA PA PA, PCP & SCP LA All dimensions are in mm Specify the finish code after each product code e.g LA0SS 9

21 CENTURION RANGE HINGES Hinges Ball Bearing LA62 LA60 LA6 A series of square and radius cornered hinges BS EN 95 Grade Polished or Satin Stainless Steel Square cornered hinge Sizes LA60 02 x 76mm LA6 02 x 02mm SS PS Radius cornered hinge Sizes LA62 02 x 76mm LA6 02 x 02mm SS PS Hinges Ball Bearing A series of square and radius cornered hinges BS EN 95 Grade Mild Steel with zinc plated EZP or coloured powder coated finish Square cornered hinge Sizes x 76mm x 02mm Finish EZP Radius cornered hinge Finish Sizes 02 x 76mm 02 x 02mm EZP Fire Door Applications When used on fire doors, intumescent packs need to be specified IP H to suit 76 x 02mm hinges IP H2 to suit 02 x 02mm hinges Note: Each hinge pack contains intumescent material for a and a half of hinges. For 0 min. fire door applications specify intumescent pack per and a half of hinges. For 60 min. fire door applications specify 2 intumescent packs per and a half of hinges. All dimensions are in mm Specify the finish code after each product code e.g LA0SS 20

22 CENTURION RANGE ACCESSORIES Hooks A range of surface fixed hooks Hooks Description SS/PS SA LA6 Buffered hat/coat hook LA Hat/coat hook LA2 Coat hook LA2 LA LA6 Signs & Symbols A series of symbols supplied with wood screws for surface fixing. See table for finishes available. Signs 50 x 00mm Description SS/PS PA Male symbol Female symbol Disabled symbol Baby change Shower symbol Signs 50 x 50mm Description SS/PS PA Unisex symbol For further options on signage please refer to our Orbis Classic, Orbis Commercial or Orbis Premier brochures. Other complimentary items are also available. Please contact your local Laidlaw Technical Consultant or Sales Office for more information FIRE EXIT mm x 60mm FIRE EXIT mm x 60mm Automatic fire door Keep clear Fire door Keep locked Secure door open when premises are occupied Fire check door Keep clear This door will automatically close when the alarm system is operated Test release device weekly This door to be kept locked shut when not in use Keep unlocked during working hours Alarm will sound if this door is opened Keep locked shut Close this door Automatic fire door Keep clear Close at night Remove security fastening when premises are occupied Fire door Keep shut All dimensions are in mm Specify the finish code after each product code e.g LA0SS 2

23 CENTURION RANGE INDEX Item No. Page No. Item No. Page No. Item No. Page No. FPP 9 FPP5 9 FPP6 9 FPP7 9 LA02 LA02.5 LA05 7 LA06 7 LA07 7 LA0 7 LA0 LA0.5 LA 7 LA 7 LA5 7 LA6 7 LA7 LA7.5 LA7BL LA7.5BL LA7LK LA7.5LK LA7OV LA7.5OV LA LA.5 LAD LA.5D LA9 0 LA2 20 LA2 9 LA LA LA2 0 LA25 0 LA26 0 LA26. 0 LA27 0 LA2 0 LA5 9 LA6 7 LA7 7 LA 7 LA9 7 LA0 7 LA 7 LA2 7 LA2. 7 LA 7 LA 7 LA5 7 LA6 7 LA7 7 LA9 7 LA50 7 LA5 9 LA60 6 LA60R 6 LA60. 7 LA LA6 6 LA6R 6 LA6. 7 LA LA62 6 LA62R 6 LA6 6 LA6R 6 LA6 6 LA6R 6 LA65 6 LA65R 6 LA7 LA7 5 LA75 5 LA77 7 LA7 7 LA0 7 LA 7 LA2 9 LA LA6 20 LA5 9 LA6 20 LA90 LA90.0 LA9 LA92 LA92.0 LA00 7 LA0 7 LA02 7 LA0 7 LA6 7 LA7 7 LA 7 LA9 7 LA26 7 LA27 7 LA2 7 LA29 7 LA0 LA LA2 LA LA LA5 LA5 6 LA52 6 LA5 6 LA5.9 7 LA LA60 20 LA6 20 LA62 20 LA6 20 LA200E.0 6 LA200E.5 6 LA20E.60 6 LA20E.70 6 LA20E.0 6 LA202E.60 6 LA202E.70 6 LA202E.0 6 LA200O.0 6 LA200O.5 6 LA20O.60 6 LA20O.70 6 LA20O.0 6 LA202O.60 6 LA202O.70 6 LA202O.0 6 LA20 6 LA20 6 LA02 LA0 LA2 LA LA502 LA50 LA52 LA5 LA LA LA70. 9 LA70.R 9 LA LA70.25R R BB BB BB BB BB Item No. Page No BB BB BB BB BB BB / / / /

24 As the UK's leading specifier and supplier of architectural hardware, timber doorsets and handrail & balustrade solutions, Laidlaw offers its unique service through a national network of 2 sales offices and trade counters. Each Laidlaw sales office is supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset. Barnstaple, Branham Crescent Roundswell Business Park (West) Barnstaple, North Devon EX TD T: F: Bristol, Riverside Business Park St. Annes Road, St. Annes Bristol BS ED T: F: Cardiff Ty Cefnfor, Ocean Park Cardiff CF2 5PE T: F: Gateshead Halifax Court Halifax Road Dunston, Gateshead Tyne & Wear NE 9JT T: F: Liverpool 5 Century Building Summers Road Brunswick Business Park Liverpool, Merseyside L BL T: F: London The Building Centre 26 Store Street London WCE 7BT T: F: Perth PO Box 5, Arran Road Perth PH DU T: F: Salford Centurion House Dakota Avenue, Salford Manchester M50 2PU T: F: Sales Office Trade Counter Distribution Centre Glasgow Clifford Court 7 Woodville Street Ibrox Business Park Glasgow G5 2RQ T: F: Kinmel Bay 7 Tir Llwyd Industrial Estate St Asaph Avenue Kinmel Bay, Rhyl North Wales LL 5JA T: F: Sheffield Sheffield Industrial Estate Surbiton Street Sheffield S9 2DN T: F: Willenhall Strawberry Lane Willenhall West Midlands WV RS T: F: To a sales office use the following format: info.office@laidlaw.net e.g. info.bristol@laidlaw.net Timber Doorsets Saving up to 0% installation time and eliminating coordinating problems between doors and ironmongery, Laidlaw has pioneered the Orbis Timber Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to minimise onsite work. Architectural Hardware Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware, including Access Control, to the UK construction industry. As with all its product portfolios, Laidlaw's huge range of architectural hardware, including the renowned Orbis brand, is designed to comply with European building standards. Handrail and Balustrade Solutions Using a modular system in either stainless steel, nylon, timber or a combination of these, Laidlaw's handrail and balustrade solutions are designed to satisfy each client's specifications. Offering the complete technical service, highly trained staff are involved at every stage of each project, from site surveys and design through to supply and installation. Laidlaw subscribes to NBS Plus which contains full specification clauses for all Laidlaw products and is a RIBA approved supplier of CPD seminars. Laidlaw also subscribes and is an active member of The Guild of Architectural Ironmongers (GAI) which is a recognised body that promotes standards in integrity and excellence in the business of architectural ironmongery. While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown. a d v a n c i n g a r c h i t e c t u r a l i r o n m o n g e r y RS 050 g a r i m e m b e Laidlaw Solutions Limited November 2007/L0/00