Process connection. Further designs. Order code. to EN
|
|
- Shon Kelley
- 5 years ago
- Views:
Transcription
1 Replacement measuring cell for pressure for SITRANS P, DS III, DS III PA and DS III FF series 7 M F D C bar g ( psi g) B bar g ( psi g) C bar g ( psi g) D bar g ( psi g) E bar g ( psi g) F bar g ( psi g) G bar g ( psi g) J Seal diaphragm Connection shank G½B to EN Female thread ½-14 NPT 1 Oval flange made of stainless steel, max. span 160 bar (2320 psi) - Mounting thread M10 to DIN Please add "-Z" to and specify. Replacement measuring cell for absolute pressure (from the pressure series) for SITRANS P, DS III, DS III PA and DS III FF series F) 7 M F D C mbar a ( psi a) D mbar a ( psi a) F bar a ( psi a) G bar a ( psi a) H Seal diaphragm Connection shank G½B to EN Female thread ½-14 NPT 1 Oval flange made of stainless steel, max. span 160 bar (2320 psi) - Mounting thread M10 to DIN Please add "-Z" to and specify.
2 Replacement measuring cell for absolute pressure (from the differential pressure series) for SITRANS P, DS III, DS III PA and DS III FF series F) 7 M F mbar a ( psi a) E) D mbar a ( psi a) E) F bar a ( psi a) E) G bar a ( psi a) H bar a ( psi a) K E Tantalum Tantalum E Monel Monel E) H Gold Gold L Female thread ¼-18 NPT with flange Vent on side of process flange 1) - Mounting thread M10 to DIN Mounting thread 7 / UNF to EN Please add "-Z" to and specify. G½B D16 Remote seal flanges D20 Vent on side for gas measurements H02 Process flanges without with process flange made of - Hastelloy K01 - Monel K02 - Stainless steel with PVDF insert K04 max. PN 10 (MWP 145 psi) max. temperature of medium 90 C (194 F) 1) Not for span " bar ( psi)" E) Subject to the export regulations AL: 2B230, ECCN: N. Replacement measuring cell for differential pressure and PN 32/160 (MWP 464/2320 psi) for SITRANS P, DS III, DS III PA and DS III FF series 7 M F PN 32 (MWP 464 psi) mbar 1) ( inh 2 O) B PN 160 (MWP 2320 psi) mbar ( inh 2 O) C mbar ( inh 2 O) D mbar ( inh 2 O) E mbar ( inh 2 O) F mbar ( inh 2 O) G bar ( psi) H Tantalum 2) Tantalum E Monel 2) Monel H Gold 2) Gold L Female thread ¼-18 NPT with flange Vent on side of process flange - Mounting thread M10 to DIN Mounting thread 7 / UNF to EN Stainless steel process flange screws 2 Please add "-Z" to and specify. Remote seal flanges D20 Vent on side for gas measurements H02 Stainless steel process flanges for vertical H03 differential pressure lines Process flanges without with process flange made of - Hastelloy K01 - Monel K02 - Stainless steel with PVDF insert K04 max. PN 10 (MWP 145 psi) max. temperature of medium 90 C (194 F) 1) Not suitable for of remote seal 2) Only together with max. spans 250, 1600, 5000 and mbar (3.63, 23.2, 72.5 and 435 psi).
3 Replacement measuring cell for differential pressure and PN 420 (MWP 6092 psi) for SITRANS P, DS III, DS III PA and 7 M F DS III FF series mbar ( inh 2 O) D mbar ( inh 2 O) E mbar ( inh 2 O) F mbar ( inh 2 O) G bar ( psi) H Gold 1) Gold L Female thread ¼-18 NPT with flange - Mounting thread M12 to DIN Mounting thread 7 / UNF to EN Vent on side of process flange - Mounting thread M12 to DIN Mounting thread 7 / UNF to EN Please add "-Z" to and specify Order code. Stainless steel process flanges for vertical H03 differential pressure lines without process flanges Replacement measuring cell for level for SITRANS P, DS III, DS III PA and DS III FF series 7 M F Rated measuring range 250 mbar (3.63 psi) D 600 mbar (8.70 psi) E 1600 mbar (23.2 psi) F 5 bar (72.5 psi) G of low-pressure side Female thread ¼-18 NPT with flange Please add "-Z" to and specify Order code. without process flanges 1) Not together with max. span 600 mbar (240.9 inh 2 O)
4 Selection and Odering data Mounting bracket and fastening parts for pressure transmitters (7MF C.) For absolute pressure transmitters (7MF C.) 7MF4997-1AB 7MF4997-1AH Mounting bracket and fastening parts for pressure transmitters (7MF A., -..B.,..D. and..f.) For absolute pressure transmitters (7MF A., -..B.,..D. and..f.) 7MF4997-1AC } 7MF4997-1AJ For differential pressure transmitters with flange thread M10 (7MF and 7MF ) 7MF4997-1AD } 7MF4997-1AK For differential pressure transmitters with flange thread M12 (7MF ) 7MF4997-1AE 7MF4997-1AL For differential and absolute pressure transmitters with flange thread 7/16-20 UNF SITRANS P DS III, DS III PA DS III FF (7MF , 7MF and 7MF ) 7MF4997-1AF 7MF4997-1AM Cover made of die-cast aluminum, including gasket, without window F) 7MF4997-1BB with window } 7MF4997-1BE F) Cover made of stainless steel, including gasket, without window F) 7MF4997-1BC with window F) 7MF4997-1BF Digital indicator 7MF4997-1BR Including mounting material Measuring point label without inscription (5 units) 7MF4997-1CA Printed (1 unit) 7MF4997-1CB-Z Data according to Y01 or Y02, Y15 and Y16 Y..:... (see "Pressure transmitters") Selection and Odering data Mounting screws For measuring point label, grounding and 7MF4997-1CD terminals or for digital indicator (50 units) Sealing screws (1 set = 2 units) for process flange 7MF4997-1CG made of Hastelloy 7MF4997-1CH Sealing screws with vent valve Complete (1 set = 2 units) } 7MF4997-1CP made of Hastelloy 7MF4997-1CQ Electronics 7MF4997-1DK 7MF4997-1DL 7MF4997-1DM Connection board 7MF4997-1DN PA and FF 7MF4997-1DP made of: FPM (Viton) F) 7MF4997-2DA F) 7MF4997-2DB FEP (with silicone core, approved for food) F) 7MF4997-2DC F) 7MF4997-2DD F) 7MF4997-2DE Sealing ring for process see "Fittings" Weldable sockets for PMC PMC Style Standard: Thread 1½" 7MF4997-2HA PMC Style Minibolt: front-flush 1" 7MF4997-2HB Gaskets for PMC (packing unit = 5 units) PTFE seal for PMC Style Standard: Thread 1½" F) 7MF4997-2HC Gasket made of Viton for PMC Style Minibolt: F) 7MF4997-2HD front-flush 1" Weldable socket for TG52/50 and TG52/150 TG52/50 7MF4997-2HE TG52/150 7MF4997-2HF Seals for TG 52/50 and TG 52/150 made of 7MF4997-2HG silicone Seals for flange with front-flush diaphragm Material FPM (Viton), 10 units DN 25, PN 40 (M11) F) 7MF4997-2HH DN 25, PN 100 (M21) F) 7MF4997-2HJ 1", class 150 (M40) F) 7MF4997-2HK 1", class 300 (M45) F) 7MF4997-2HL } available ex stock
5 Selection and Odering data Operating Instructions 1) for SITRANS DS III A5E A5E French A5E Spanish A5E Italian A5E for SITRANS DS III PA A5E A5E French A5E Spanish A5E Italian A5E for SITRANS DS III FF A5E A5E French (planned) A5E Spanish (planned) A5E Italian (planned) A5E Brief instructions (Leporello) German, English for SITRANS DS III series, German, English A5E for SITRANS DS III PA, German, English A5E for SITRANS DS III FF (Available soon) A5E CD with documentation for SITRANS P, P300 series, DS III, DS III PA and DS III FF German, English, French, Spanish, Italian A5E Certificates (order only via SAP) instead of Internet download hard copy (to order) A5E on CD (to order) A5E Operating Instructions A5E for replacement of electronics, measuring cell and board (only available from the Internet) 1) HART modem with RS232 interface } 7MF4997-1DA D) with USB interface } 7MF4997-1DB D) Supplementary electronics for 4-wire See page 2/140 } available ex stock Power supply units see Chap. 8 "Supplementary Components". 1) You can download these operating instructions free-of-charge from our Internet site at D) Subject to export regulations AL: N, ECCN: EAR99H.
SITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
More informationProduct presentation SITRANS P310
Product presentation SITRANS P310 Unrestricted / Siemens 2016. All Rights Reserved. usa.siemens.com/pressure SITRANS P family Page 2 SITRANS P pressure transmitter Single range transmitters for general
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
More informationPressure Measurement
Siemens AG 202 /2 Product overview Transmitters for basic requirements /5 SITRANS P200 for gauge and absolute pressure / SITRANS P20 for gauge pressure /6 SITRANS P220 for gauge pressure /22 SITRANS P250
More information1 Overview. Pressure Measurement Transmitters for applications with basic requirements (Basic) 1/84 Siemens FI US Edition
Siemens AG 06 SITRANS P0 - Technical description Overview SITRANS P0 pressure transmitters are digital pressure transmitters with a high level of operating convenience. With a measurement accuracy of 0.075
More informationSITRANS T measuring instruments for temperature
for installation in pipelines and tanks Overview The resistance thermometer is designed for installation in tanks and pipelines as well as for the measurement of temperature with hygiene requirements.
More informationJUMO dtrans p20 DELTA
Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More information1 Overview. Pressure Measurement Transmitters for applications with basic requirements (Basic) 1/90 Siemens FI US Edition
Siemens AG 07 SITRANS P0 - Technical description Overview SITRANS P0 pressure transmitters are digital pressure transmitters with a high level of operating convenience. With a measurement accuracy of 0.075
More informationPressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
More informationPressure Measurement Remote seals for transmitters and pressure gauges
Siemens pplication The remote seals MF.. can be fitted to SITRNS P transmitters for pressure (SITRNS P, P, DSIII and P), absolute pressure (SITRNS P and DSIII) and differential pressure and flow (SITRNS
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More information2010TC for Differential Pressure, Pressure and Temperature (Mass Flow)
Technical data 2 Principle of Operation and Construction The transmitter has a modular design and consists of the differential pressure sensor module with an integrated electronic matching unit, an amplifier
More informationDPT 200. Differential Pressure Transmitter for Process Industry with HART -Communication. accuracy according to IEC 60770: 0.
Differential Pressure Transmitter for Process Industry with HART Communication accuracy according to IEC 60770: 0.075 % FSO Differential pressure from mbar up to 0 bar Static pressure max. Output signal
More information압력트랜스미터 Model ADP9000 Series
ALIA PRODUCT 압력트랜스미터 Model ADP9000 Series GEERAL ADP9000 series is a digital differential pressure transmitter designed for industrial pressure measurement applications. The ADP9000 offer Configurations
More informationCAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.
CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD. General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series
More informationLevel Measurement. Continuous level measurement - Capacitance transmitters SITRANS LC500. 5/282 Siemens FI Overview.
SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse frequency shift capacitance level
More informationDifferential pressure transmitter PASCAL Ci4 Delta P
Differential pressure transmitter PASCAL Ci4 Delta P for high static working pressure, PN 160, Type series CI4340 Features Simultaneous display of differential pressure and static pressure Long-term stability
More informationContinuous level measurement Capacitance transmitters
Siemens AG 2011 Level Measurement SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse
More informationVacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
More informationAUTUMN 2013 TIME SCHEDULE
AUTUMN 2013 TIME SCHEDULE Instructor 110 A LC 3 M W F 830-920 195 L EEB 105 CRAIG 11903 11904 AA QZ T 930-1020 25 L MUS 219 11905 # AB QZ T 1030-1120 25 L DEN 213 11906 AC QZ T 1230-120 25 L SMI 107 11907
More informationLevel instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
More informationJUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram
Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It
More informationSmart Pressure Transmitter
DOC. NO.: C3500L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3500L 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
More informationCombined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
More informationSITRANS P measuring instruments for pressure
Overview The is a digital pressure transmitter for gage and absolute pressure All conventional thread versions are available as process connections. In addition, various hygiene-based connections and flange
More informationPressure Prozessdruck. Pressure - Differential pressure. Overview 185 VEGADIF 186. Accessory 192. Dimensions 194 AL-EN - 183
Pressure Prozessdruck Pressure - Differential ressure Overview 185 VEGADIF 186 Accessory 192 Dimensions 194 AL-EN - 183 Pressure Differential ressure 184 - AL-EN Pressure Differential ressure Alication
More informationSATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
More informationTemperature Measurement Resistance thermometers
Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter
More informationDifferential pressure transmitter PASCAL Ci4 Delta P
Differential pressure transmitter PASCAL Ci4 Delta P for general application, Type Series CI4300 Features Differential pressure transmitter with metallic diaphragm High-resolution graphic display with
More informationOverview Replacement Meterbody and Heads for Model STD 110
ST 3000 Smart Transmitter, Release 300 and Smart Field Communicator Model STS03 Transmitter Model STD0 34-ST-99-8 04/03 Addendum (to User s Manual 34-ST-5-4B) Overview Replacement Meterbody and Heads for
More informationTM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
More informationMotors. IE changeover. IEC Squirrel-Cage Motors. Frame sizes 63 to 450 Power range 0.09 to 1250 kw Price List D 81.
s 63 to 450 Power range 0.09 to 1250 kw Price List D 81.1 P October International Efficiency IE changeover Premium Efficiency High Efficiency Standard Efficiency Motors Answers for industry. Statutory
More informationMagnetic-inductive flow meter EPS / UMF2. Technical data sheet
Magnetic-inductive flow meter EPS / UMF2 Technical data sheet high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials low-cost grounding
More informationFAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications
f ti r : FAR51 Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications Application Process adapter for the microwave barriers
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationDIAPHRAGM SEALS. MHP SERIES MINI HIGH PRESSURE Mini diaphragm seal for pressures up to 6000 psi
DIAPHRAGM SEALS seals, also referred to as isolators or chemical seals, are used to protect instruments from viscous, corrosive or very high temperature process media. PIC stocks, fills and calibrates
More informationValve Blocks. For direct flanging to pressure and differential pressure transmitters. Drop-forging housing. Replaceable valve seat
Data Sheet 10/14-5.32-EN Valve Blocks For direct flanging to pressure and differential pressure transmitters Drop-forging housing Replaceable valve seat Valve stem with back-flow seal and crimped valve
More informationType E-10, E-11 Hazardous Area Explosion-proof Transmitters
Electronic Pressure Catalog > Hazardous Area > E-10, E-11 Type E-10, E-11 Hazardous Area Explosion-proof Transmitters Meets ANSI / ISA 12.27.01-2003 single seal requirements - no dual seal required Applications
More informationRosemount DP Level Transmitters and 1199 Remote Seals
Product Data Sheet FOR ROSEMOUNT 3051S, 3051, AND 2051 TRANSMITTERS APPLICATIONS Level, Flow, Pressure, Interface, Density Extreme hot and cold temperatures Corrosive, clogging, or viscous processes Hygienic
More informationRosemount 3051S Electronic Remote Sensor (ERS) System
Rosemount 3051S Electronic Remote Sensor (ERS) System The Rosemount 3051S ERS System is a flexible, 2-wire 4-20 ma ART architecture that calculates differential pressure (DP) electronically using two pressure
More informationOPTIBAR DP 7060 C Technical Datasheet
OPTIBAR DP 7060 C Technical Datasheet Differential pressure transmitter for measuring flow, level, differential pressure, density and interface High accuracy and measurement stability under all process
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More informationPRIME 3-BURNER PROPANE BARBECUE Assembly Manual
PRIME 3-BURNER PROPANE BARBECUE Assembly Manual 85-3135-0 / G32010 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims must
More informationDifferential pressure and level transmitter
Differential and level transmitter PASCAL Ci4 Delta P, highly overload protected,type series CI4350 Features Application area General process engineering Chemical industry Petrochemical industry General
More informationShort-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationOrifice flowmeter F O N4
Special features Suitable for any mounting positions without reduction in accuracy Complies with requirements for treatment and disinfection of swimming/ bathing pools (DIN 9 643) Simple installation Direct
More informationDATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
More informationJUMO dtrans p20. Process pressure transmitter. Brief description. Special features. Block diagram. Approvals/approval marks (see "Technical data")
Page 1/15 JUMO dtrans p20 Process pressure transmitter Brief description The device with the HART interface combines maximum precision with simple operation. It is used to measure the system pressure of
More informationPRIME 3-BURNER PROPANE BARBECUE Assembly Manual
PRIME -BURNER PROPANE RBECUE Assembly Manual 85-15-0 / G2012 1 YEAR LIMITED WARRANTY READ AND SAVE MANUAL FOR FUTURE REFERENCE. Assemble your grill immediately. Missing or damaged parts claims must be
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationAPPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions
APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4
More informationRosemount DP Level Transmitters and 1199 Seal Systems
Rosemount DP Level Transmitters and 1199 Seal Systems Product Data Sheet November 2013 00813-0100-4016, Rev NA Applications Level, Flow, Pressure, Interface, Density Extreme hot and cold temperatures Corrosive,
More informationSmart Pressure Transmitter
DOC. NO.: C3100L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3100L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200
More informationTEL-TRU PRESSURE TRANSMITTERS Threaded Series Model P121
Price List PTP17 Effective 3/10/17 P121 $330.75 C 12 mv/v (4wire) F 16 Vdc output 44.10 G 15 Vdc output 44.10 H 0100 mv output 44.10 L 111 Vdc output 44.10 M 110 Vdc output 44.10 3 0.25% Std. 6 0.10%,
More informationThe Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
More informationNingbo GC Bob Instrument Co., Ltd. Diaphragm Seals. Administrator 2014/4/13
Ningbo GC Bob Instrument Co., Ltd. Diaphragm Seals Administrator 2014/4/13 INDEX Brief:... 2 Configuration Principle... 3 Level Difference of diaphragm pressure gauge seals liquid... 4 The temperature
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationSevere Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
More informationRosemount 3051 Pressure Transmitter
Product Data Sheet Rosemount 3051 Rosemount 3051 Pressure Transmitter THE PROVEN INDUSTRY LEADER IN PRESSURE MEASUREMENT Best-in-Class performance with up to 0.04% reference accuracy Industry first installed
More informationPressure transmitter PASCAL CV4
Pressure transmitter PASCAL CV4 with threaded connection, Type series CV4100 Features Application area Pharmaceutical industry Food industry Biotechnology General process technology Compact case of stainless
More informationStackFlowMaster FPD581, FPD583 and FPD585 Stack gas metering systems
Data sheet DS/FPD580 EN StackFlowMaster FPD58, FPD583 and FPD585 Stack gas metering systems Measurement made easy Flow metering solutions for Continuous Emissions Monitoring (CEMS) Continuous measurement
More informationDifferential pressure transmitter PASCAL Ci4 Delta P
Differential pressure transmitter PASCAL Ci4 Delta P for diaphragm seal operation, Type series CI4330 Features Application area General process engineering Chemical and petrochemical industry General process
More informationGuide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
More informationModel 261GC/GG/GJ/GM/GN Gauge Model 261AC/AG/AJ/AM/AN Absolute. Series 2600T Pressure Transmitters. Engineered solutions for all applications
Contents Data Sheet SS/261GC/AC-EN Rev. 05 Model 261GC/GG/GJ/GM/GN Gauge Model 261AC/AG/AJ/AM/AN Absolute Series 2600T Pressure Transmitters Engineered solutions for all applications With direct mount
More informationMOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction
More informationSelection and Types of 1199 Remote Mount Seal Systems
General Specifications and Datasheet 1199 Diaphragm Seal GSD- 1199DS-EV01 Selection and Types of 1199 Remote Mount Seal Systems Product Introduction Differential pressure transmitter assembly with remote
More informationRosemount DP Level Transmitters and 1199 Seal Systems
Product Data Sheet FOR ROSEMOUNT 3051S, 3051, AND 2051 TRANSMITTERS APPLICATIONS Level, Flow, Pressure, Interface, Density Extreme hot and cold temperatures Corrosive, clogging, or viscous processes Hygienic
More informationFlow Measurement SITRANS F M. Flow sensor MAG /85. Overview
Siemens AG 2010 low Measurement Overview Design Compact or remote mounting possible Easy plug & play field changeability of transmitter Ex ATEX and M/CSA versions High temperature sensor for applications
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationDL 01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
DL 0 Battery Powered for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless
More informationJUMO dtrans p02. Pressure transmitter. General application. Approvals/marks of conformity. Data Sheet Page 1/6. II 1/2G Ex ia IIC T6 Ga/Gb
sales@jumo.co.uk info@jumo.us Data Sheet 404385 Page 1/6 JUMO dtrans p02 Pressure transmitter II 1/2G Ex ia IIC T6 Ga/Gb General application The pressure transmitter Type JUMO dtrans p02 is used to measure
More informationETP80. Electronic Transmitter for Pressure, Differential Pressure and Level
ETP80 Electronic Transmitter for Pressure, Differential Pressure and Level The ETP80 is a series of pressure transmitters with a wide range of s to suit most applications. The transmitters can measure
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP up to 31 cm 3 (1.89 inch 3 ) p max 3 bar ( PSI) Speed from to RPM Technical Features Operating pressure 8 bar, Peak pressure 3 bar High-strength quality aluminum alloys
More informationRosemount DP Level Transmitters and 1199 Diaphragm Seal Systems
Rosemount DP Level Transmitters and 1199 Diaphragm Seal Systems Product Data Sheet March 2017 00813-0100-4016, Rev RD Applications Level, flow, pressure, interface, density Extreme hot and cold temperatures
More informationRosemount DP Level Transmitters and 1199 Diaphragm Seal Systems
Rosemount DP Level Transmitters and 1199 Diaphragm Seal Systems Product Data Sheet December 2017 00813-0100-4016, Rev RF Applications Level, flow, pressure, interface, density Extreme hot and cold temperatures
More informationAir Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
More information~... se_rv_ic_e M_A_NU_AL_2_44_4._z1,~
WABCO... se_rv_ic_e M_A_NU_AL_2_44_4._z1, DN-11 DC NEUTRAL RELAYS PARTS LIST This service manual provides parts lists for 4-, 6-, 8-, and IO-point DN-11 DC Neutral Relays. Included in this Parts List is
More informationABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters
ABB measurement & analytics data sheet Model M26 Manifold line for 266 pressure transmitters Measurement made easy Engineered solutions for all applications 2 M 26 M a n ifol d li n e for 26 6 p r ess
More informationApplication The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
More informationXMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
More informationProline Promag 10H, 50H, 53H, 55H
Supplementary documentation for the Operating Instructions Supplementary information to following modifications: - New nominal diameters DN 125 to 150 (5 to 6") - New process connections for nominal diameters
More informationDifferential Pressure Gauge
DA03 Differential Pressure Gauge The DA 03 is a versatile differential pressure gauge which can be configured with various optional features, such as: Adjustable limit contacts: delayed action or magnet
More informationPressure transducer DMU 01K Compact version
Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,
More informationCylindrical Valves SCP Series
SCP: Product Info 22 Cylindrical Valves, plastomer-lined PM 22 M.00 e May 2004 Cylindrical Valves SCP Series are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even
More informationPneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
More information1 Overview. Pressure Measurement Transmitters for applications with highest requirements (Premium) 1/236 Siemens FI US Edition
SITRANS P500 - Technical description Overview SITRANS P500 pressure transmitters are digital pressure transmitters featuring extensive user-friendliness and which fulfil the most stringent demands of accuracy,
More informationThe right choice for your application. Pressure sensors from ifm.
The right choice for your application. Pressure sensors from ifm. Process sensors www.ifm.com/gb/pressure Systems for pressure monitoring. The optimum solution for every requirement. Pressure sensors with
More informationAirflex Rotorseal Description
Airflex Rotorseal The Airflex rotorseal is a rotary union (rotary joint) which permits the transfer of gases or liquids, under pressure or vacuum, into or out of the exposed end of a rotating shaft or
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationp Additional dimensions see section dimensions.
Hydrostatic pressure sensor Dimensions LHC-M20 with process connection G51 74 LHC-M40 with process connection F76 74 232.5 60 261 G1½ 28 20 Ø22 p Additional dimensions see section dimensions. Function
More informationCoriolis Flow Solutions for a Global Marketplace
Coriolis Flow Solutions for a Global Marketplace www.tricorflow.com DECADES of EXPERIENCE = EXCEPTIONAL RESULTS When you combine decades of experience with truly unique talents, great things can happen.
More information3RG4 BERO Inductive Proximity Switches
3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40
More informationTable 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
More informationSpecial Documentation Mechanical accessories for pressure measuring devices
SD1553P//EN/3.17 71381283 Products Solutions Services Special Documentation Mechanical accessories for pressure measuring devices Pressure measurement Manifolds, oval flange adapters, pressure gauge valves,
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationRosemount 3051S Series of Instrumentation
Product Data Sheet 3051S Series delivers highest field performance and reliability SuperModule Platform provides a foundation for integrated pressure, flow, and level solutions IEC 62591 (WirelessHART
More informationPush Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
More informationPressure measurement. Process pressure VEGABAR 14 VEGABAR 17. Product Information
Pressure measurement Process pressure VEGABAR 4 VEGABAR 7 Product Information Contents Contents Description of the measuring principle........................................................... Type overview..............................................................................
More information