Accumulator Charging Unit SLE 40 Technical Data Sheet
|
|
- Felicia Wilson
- 5 years ago
- Views:
Transcription
1 Accumulator Charging Unit SLE 0 Technical Data Sheet Design and Function The accumulator charging unit SLE 0 is a compact function element, which fulfills in an optimum way the requirements of the modern accumulator charging technology. With smooth, hydraulically controlled switching the system pressure is monitored and held to the chosen pressure level. Low power losses allow an energy optimised system and simultaneously provides, at low driving power, the possibility of high peak capacity. All functions and safety relevant components are integrated in the unit. The compact block assembly results in reduced pipe work. As a standard component the SLE 0 operates for pump flow rates up to 0 l/min. Additional optional modular components are available.
2 Features Advantages Benefits Temporary storage of hydraulic energy in hydraulic accumulators. Standardized accumulator charging circuit with very few components and modular design. Hydraulic control of the switching operations by a piloted, specially matched pressure control valve. The hydraulic system is more energy efficient. Energy consumption drops by up to 0% compared to operation without an accumulator. Motor and pump are designed only for the average energy demand. This keeps the planning effort asso ciated with system integration low. A large number of designs and sizes are available. Commissioning is simple. Switching operations are smooth. No pressure spikes occur in the system. Switching operations are highly precise. The switching operations are highly dynamic. + You reduce your energy costs, which results in a lower total cost of owner ship (TCO). + The procurement costs for the hydraulic system are lower. + Quick and simple system integration reduces your development times and costs. + Commissioning is quick and low-cost. + All your hydraulic system com ponents will have a longer service life. + Noise emissions are low. + The force curves for the actuator are very precise and the parts produced are high quality. + A quick cycle design results in high productivity. Power Pack with SLE 0
3 Technical Data General Mounting x M0x0 Ambient temperature - to +0 C Mounting position Hydraulic Operating pressure Pump delivery Pressure steps any max. bar up to 0 l/min (depending on pressure range) 0- bar, -0 bar, 0-0 bar; 0- bar; -0 bar; 0- bar Switching hysteresis %;,%; 0%; %; 0% Oil temperature -0 to +0 C Viscosity range 0 to 00 mm /s Electric System of protection IP, DIN 000, plugged valve plug Specifications integration of all function and safety relevant components compact design, simple start-up, handling without problems high availability, robust and proven function components optimized power consumption results in reduced heat emission to the hydraulic system Options electrical accumulator discharge / unpressurized electric motor start-up pressure switch for additional system pressure monitoring external control pressure connection Emergency stop blocking valve Characteristic curve, by-pass pressure P-T, for hydraulic oil mm²/s, 0 C..0 [bar], [l/min]
4 Hydraulic Circuit Diagram Accumulator charging main block Check valve Safety valve (type examination) Accumulator charging valve Pressure gauge Accumulator discharging, manualy Option: electric accumulator discharging Option: pressure switch for system pressure
5 Dimensioned Drawing Ty=G/ P=G T=G Ty=G/ MS=G/, 9, S=G , x M0x0 (0.9) PV000 (G/) 90 PV000 (G/) Accumulator charging main block Check valve Safety valve (type examination) Accumulator charging valve Pressure gauge Accumulator discharging, manualy Option: electric accumulator discharging Option: pressure switch for system pressure dimensions in mm
6 Type Code SLE0.-/0-S --/ R /0 Voltage / frequency /0 = V DC 0/ = 0V/0Hz Solenoid Options 0 = without = emergency shut off directional control valve = seat directional control valve = pressure switch = pressure sensor = pressure switch electronically Options 0 = without electric discharge = with electric discharge Design code Accumulator connection 00 = cover plate 0 = without accumulator connection = G¼ external thread = G external thread = M0x. external thread = M0x. external thread = Mx. internal thread = G external thread and G internal thread = G¼ internal thread = G ½ external thread and G ¼ internal thread PV-connection S = PV-connection low pressure (PV 000) <bar, standard G¼ H = PV-connection high pressure (PV 000) >bar, standard G¼ Pressure range safety valve Pressure range accumulator charging valve maximum adjustable pressure: ; 0; 0; ; 0; Switching hysteresis 0 = %; = 0%; = %; = 0%; =. Accumulator charging unit SLE 0 Material number
7 Voith Turbo H + L Hydraulic GmbH & Co. KG Schuckertstraße Rutesheim, Germany Tel Fax sales-rut@voith.com 0-SLE0-DSH-ENX-09 VTHL Dimensions and illustrations without obligation. Subject to modifications.
Hydraulic Ram Control Unit HSE NG 6
Hydraulic Ram Control Unit HSE NG 6 Design and Function forms the basis for the stroke control. Common features of VTHL ram control units: Tdc (top dead center) control is always with mechanical closed
More informationHydraulic Ram Control Unit HSE NG 10
Hydraulic Ram Control Unit HSE NG 0 Design and Function Common features of VTHL ram control units: modular design robust valve elements high dynamics simple control structure The integration of all necessary
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationIPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationCustom Designed Solutions. Voith Hydraulic Power Packs
Custom Designed Solutions. Voith Hydraulic Power Packs Power Packs from Experts Voith is your reliable fluid power provider with more than 40 years of experience gained through the design and manufacturing
More informationIPC Medium-Pressure Internal Gear Pumps Technical Data Sheet
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial
More informationHydraulic Power Packs
Hydraulic Power Packs Power Packs of Experts Voith is your reliable fluid power partner with more than 40 years experience gained in the design and manufacture of hydraulic power units. With excess of
More informationThe Future Intelligent Servo Pump Drives.
The Future Intelligent Servo Pump Drives. 1 Innovative Technology. Industry 4.0 ready Voith servo pumps combine the advantages of hydraulics and servo mechanics. By measuring current operating states and
More informationTransforming your press into a servo press Press drive PSH. voith.com
voith.com Transforming your press into a servo press Press drive PSH Innovation In the hydraulic press drive PSH servo pumps replaces the classic valve and control technology. This concept allows for an
More informationIPV Catalog High-pressure Internal Gear Pumps
IPV Catalog High-pressure Internal Gear Pumps Benefits that convince Features that count Machines that run Internal gear pumps from Voith Turbo H + L Hydraulic are working reliably in hun dreds of thousands
More informationIPV catalog High-pressure internal gear pumps
Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated
More informationSaving energy while increasing productivity Servo-hydraulic drive CSH. voith.com
voith.com Saving energy while increasing productivity Servo-hydraulic drive CSH In deep drawing presses, two subsystems play the decisive role for productivity and workpiece quality: the press drive and
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationProportional Pressure Reducing Valve PDM08130
Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional
More informationProportional cartridge throttle valve, with inductive position transducer, pilot operated
Proportional cartridge throttle valve, with inductive position transducer, pilot operated RE 29215/09.05 1/18 Type FESX Nominal size 16, 25, 32, 40, 50 Unit series 1X Maximum working pressure A, B, X 315
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationPubl. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V
Publ. 3-EN 2950-A DENISON HYDRAULICS Pressure Relief Valve R6V FEATURES, SYMBOL FEATURES High Performance: R6V valves are designed for a maximum pressure of 350 bar and a flow capacity up to 650 l/min.
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
More informationDual-circuit power brake valve LT 07
Dual-circuit power brake valve L 7 RE 666 Edition:.7 Replaces: 7.6 Series X Service brake pressure, 6, 8,, and bar Maximum inlet pressure 5 bar For modular designs Features A direct-operated pressure reducing
More informationProportional cartridge throttle valve, with on-board electronics (OBE) and inductive position transducer, pilot operated
Proportional cartridge throttle valve, with on-board electronics (OBE) and inductive position transducer, pilot operated RE 29216/09.05 1/18 Type FESE Nominal size 16, 25, 32, 40, 50 Unit series 1 Maximum
More information3-way servo solenoid valves, cartridge type, pilot operated, with inductive position transducer
3-way servo solenoid valves, cartridge type, pilot operated, with inductive position transducer Type 3WRCB 25...50 Nominal size (NG) 25, 32, 50 Unit series 1X Maximum working pressure P, A, T, X, Z 315
More informationScavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P
Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block serves to maintain the feed pressure,
More informationServo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29077/01.05 1/16 Replaces: 01.03 Type 4WRVE10...25 Size 10, 16, 25 Unit series 2X Maximum working pressure P, A, B 350 bar, T, X, Y 250 bar Nominal
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationFlow sharing control block in sandwich plate design M7-25
Flow sharing control block in sandwich plate design M7-25 RE 64297 Edition: 07.2016 Replaces: 06.2012 Size 25 Series 3X Maximum working pressure on the pump side 380 bar on the consumer side 420 bar Maximum
More informationPilot Operated Proportional DC Valve Series D*1FW / D*1FT
Characteristics The D*1FW / D*1FT pilot-operated proportional DC valves are available in NG10 (CETOP5), NG16 (CETOP7) and NG25 (CETOP8). These valves (D*1FW) are controlled electrically with the external
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationDirectional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
More informationSymbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
More informationRotary Blowers Omega Series Air delivery from 0.5 to 160 m³/min Pressure up to 1000 mbar, vacuum to -500 mbar
www.kaeser.com Rotary Blowers Omega Series Air delivery from 0.5 to 160 m³/min Pressure up to 1000, vacuum to -500 KAESER Rotary Blowers Efficient and Durable Renowned throughout the world for their efficiency
More informationValve Technology and Special Solutions for Transmissions on Mobile Machines
Valve Technology and Special Solutions for Transmissions on Mobile Machines Your partner for expertise in solutions specific to mobile transmissions Innovative and tailored valve solutions for modern mobile
More information4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING
/ Proportional directional valve elements L8P with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING L8P (EDC-IP) RE 8- Edition:.6 Replaces: 7. Size 6 Series
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationFlow sharing control block in mono block / sandwich plate design M6-22
Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationExamples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
More informationServo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29045/10.05 Replaces: 01.05 1/12 Type 5WRPE 10 Size 10 Unit series 2X Maximum working pressure P 1, P 2, A, B 210 bar, T 50 bar Nominal flow rate
More informationSectional Directional Control Valve RS 220
Sectional Directional Control Valve RS 0 RS 0 is a sectional open center valve designed for max. operating pressures up to 00 bar and max. pump flows up to 0 l/min. Technical data Pressure and flow values*
More informationServo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29088/01.05 1/18 Replaces: 05.04 Type 4WRLE10...35, symbols V/V1 Size 10, 16, 25, 35 Unit series 3X Maximum working pressure P, A, B 350 bar, T,
More informationProportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback
Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback RE 29159/07.05 1/10 Type DBEBE6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar,
More informationProportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
More informationProportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback
Proportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback Type DREBE6X Nominal size (NG) 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar
More informationConstant-filled fluid coupling with valve control Types TV F
Constant-filled fluid coupling with valve control Types TV F Voith Turbo fluid couplings with valve control: Putting traction on the chain Because of the harsh operating conditions underground, AFC drives
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 100 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable ball seat
More informationHYDRAULIC POWERED SINGLE AND DUAL CIRCUITS BRAKING VALVE TYPE COMPACT S6
HYDRAULIC POWERED SINGLE AND DUAL CIRCUITS BRAKING VALVE TYPE COMPACT S6 S.p.A. SVILUPPO APPLICAZION FRENI INDUSTRIALI BRAKE SYSTEM SAFIM S6 03 00.01 500A-0003A-EN APPLICATION FIELDS TYRED LOADERS EXCAVATORS
More informationDirectional servo-valve of 4-way design
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) 426-54 www.cmafh.com Directional servo-valve of 4-way design Type 4WSE3E 32 Size 32 Component series 5X Maximum
More informationDual-circuit power brake valve LT 07
Dual-circuit power brake valve L 7 RE 666 Edition: 7.5 Replaces: 8. Series X Service brake pressure, 6, 8,, and bar Maximum inlet pressure bar For modular designs Features A direct-operated pressure reducing
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More informationPilot-Operated Proportional DC Valve Series D*1FH
Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2
More informationDIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
More informationProportional directional control valve, pilot operated with on-board electronics (OBE) and inductive position transducer
Proportional directional control valve, pilot operated with on-board electronics (OBE) and inductive position transducer RE 29076/12.05 1/24 Type 4WRBKE Nominal size (NG) 10, 16, 27, 35 Unit series 1X
More informationPISTON MOTORS FOR CLOSED LOOP SYSTEMS types HMF/A/V/R-02
1-control optional swashing to 0 cc /rev 2-swash plate hydrostatic bearing 3-piston-slipper assembly 21 swash angle 4-housing monoshell for high rigidity 5-valve plate housing highly integrated 6-control
More informationProportional Pressure Relief Valve Series RE*T
Characteristics The pressure relief valve series RE*T have a proportional solenoid operated pilot stage with integrated electronics and a cartridge main stage. Features Pilot-operated pressure relief valve
More informationFlow control valve range
inspired hydraulics. Flow control valve range FPR102 Functional description Flow control valves of the FPR10 series are used for load independent and stepless adjusting of the operating speed of hydraulic
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationDirectional spool valves, direct operated, smoothly switching, with solenoid actuation
Directional spool valves, direct operated, smoothly switching, with solenoid actuation Type WE..73 A12 H7564 Features 4/2 or 4/3 directional design Porting pattern according to DIN 24340 form A Porting
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More informationVINCKE INDUSTRIAL HYDRAULIC VALVES INTRODUCTION
INTRODUCTION 4 Introduction Hydraulic valves, in addition to the force density advantage of actuators, are what help make hydraulics unique in their control of force, torque and motion. Valves govern direction,
More informationVariable-Speed Turbo Couplings
Variable-Speed Turbo Couplings Fair. Reliable. Innovative. This is our promise to our customers. And it is the demand we place on ourselves in the Paper, Energy, Mobility and Service markets. Paper Energy
More information3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
More information6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
More informationDirectional spool valves type SWPN
Directional spool valves type SWPN Nominal size 6 or 10 according to DIN 24 340 Pressure pmax: Flow Vmax: 350 bar 150 lpm Product documentation D 7451 AT 12-2013-1.2 HAWE Hydraulik SE - Streitfeldstr.
More informationHYDAC (Three-Phase Current) Compact Power Units CO1
HYDAC (Three-Phase Current) Compact Power Units CO1 Up to 250 bar Up to 20 l/min In accordance with EN 60034-1 suitable for: Short-term operation: S2 = 5 min* (average value) Intermittent operation: S3
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationINSTRUCTION MANUAL. I/P Converter DSG BXXY3Z DSG BXXY4Z
INSTRUCTION MANUAL I/P Converter DSG BXXY3Z DSG BXXY4Z Revision 2.0 3.626 016136 en Page 1/15 Should you have any questions concerning the I/P converter, please contact the Service Department of the Product
More informationFlow sharing control block in mono block / sandwich plate design M6-15
Flow sharing control block in mono block / sandwich plate design M6-15 RE 64321 Edition: 01.2015 Replaces: 05.2012 Size 15 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2016 Replaces: 06.2010 Technical data Description
More informationBall valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C 0 valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and cannot be flushed
More informationHYDAC DC Compact Power Units DC1
HYDAC DC Compact Power Units DC1 up to 250 bar up to 18.4 l/min In accordance with EN 60034-1 suitable for short-term operation 981 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Very low noise level due to special
More informationServo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29037/10.05 Replaces: 01.05 1/12 Type 4WRPEH 10 Size 10 Unit series 2X Maximum working pressure P, A, B 315 bar, T 250 bar Nominal flow rate 50...100
More informationElectrohydraulic Drive System EHC-A
Electrohydraulic Drive System EHC-A HYDAC Denmark HYDAC Poland HYDAC Brazil HYDAC India HYDAC China HYDAC USA HYDAC France HYDAC Germany Your Professional Partner for Electrohydraulic Drive Systems. With
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More informationProductinformatie BAFA.NL BAFA.NL A.U.K. MÜLLER GMBH & CO. KG
Productinformatie A.U.K. MÜLLER GMBH & CO. KG Bi stable cartridge valve, DN 5 Series 50.005.101 bi Solenoid valves Control valves Special valves and systems GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany
More informationAutomatic back-flushing filter AutoFilt RF4
Automatic back-flushing filter AutoFilt RF4 RF4-1 RF4-2 Specifications Nominal size: G1 G 1½ Q max: 220 l/min p max: 16 bar Filtration ratings: 30 1000 µm 1. GENERAL Product description Self-cleaning automatic
More information4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)
4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
More informationSystem 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
More informationProportional Throttle Valves Series TDL
Catalogue HY11-200/UK Characteristics Function Proportional throttle valves are designed to include three stages. The main valve poppet is controlled by a hydraulic follower. The position of the hydraulic
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.
More information6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
More information4/3 directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE)
4/ directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE) RE 977/.1 Replaces: 1.9 1/16 Type 4WRVE 1...7, symbols V, V1 Sizes 1, 16, 5, 7 Component series
More informationPerformance That Moves. EmCon Traction Converters
Performance That Moves. EmCon Traction Converters 3 Technology for Highest Demands. EmCon Traction Converters The request for more mobility is a challenge for public light rail systems. Vehicles and rail
More informationDirectional control valves, direct operated, with electrical position feedback and integrated electronics (OBE)
Directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE) Type 4WRPE RE 29122 Edition: 2014-11 Size 10 Component series 3X Maximum operating pressure
More informationServo solenoid valves with electrical position feedback (Lvdt AC/AC)
Servo solenoid valves with electrical position feedback (Lvdt AC/AC) Type 4WRPH6 Size 6 Unit series 1X Maximum working pressure 250 bar Nominal flow rate 4...40 l/min ( p 70 bar) List of contents Contents
More informationProportional pressure relief valve, pilot operated
Proportional pressure relief valve, pilot operated RE 29156/07.05 1/10 Type DBE6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Maximum flow rate 40 l/min List of contents
More information4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING
/ and / Proportional directional valve elements L88 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING L88 (EDC-P) RE 181-9 Edition:.16 Replaces: 7.1 7.1 Size 6 Series Maximum operating pressure
More informationProportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function / NC Proportional direct-acting Armature space pressure tight up to 16 bar static pressure High linearity Quick response
More informationGetting the Speed Right. Voith Variable Speed Fluid Couplings
Getting the Speed Right. Voith Variable Speed Fluid Couplings 1 Voith sets the standards in the energy, oil & gas, paper, raw materials and transportation & automotive markets. Founded in 1867, Voith employs
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
More informationServo solenoid valves with positive overlap Position feedback (Lvdt DC/DC ±10 V)
Servo solenoid valves with positive overlap Position feedback (Lvdt DC/DC ±10 V) RE 29087/01.05 1/22 Replaces: 05.04 Type 4WRL 10 35, symbols E. / W. Nominal size 10, 16, 25, 35 Unit series 3X Maximum
More informationProportional pressure reducing valve, pilot operated
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com Proportional pressure reducing valve, pilot operated Type DRE and ZDRE Size 6 Component
More informationHydraulic inch power brake valve LT 31
Hydraulic inch power brake valve LT 31 RE 66227 Edition: 10.2013 Replaces: 06.2006 Series 1X Service brake pressure 60, 80 and 100 bar Inch pressure 25 bar HAD 5793 Features Integrated inch valve Inch
More informationProportional flow control valve, with inductive position transducer
Proportional flow control valve, with inductive position transducer RE 29220/08.05 1/16 Type 3FREZ Nominal size 6, 10 Unit series 1X Maximum working pressure 250 bar Nominal flow rate Q nom 2.6...80 l/min
More informationGENO -MX 1" - MX DN 100 backwash filter. Intended use. Scope of supply. Function. Structure
Subject to modifications TD2-AM001en_004 Edition June 2017 GENO -MX 1" - MX DN 100 backwash filter Intended use The GENO -MXA backwash filters are suitable for the following sectors: Filtration of drinking
More information