NR-DA/NDR-DA Reach Trucks

Size: px

Start display at page:

Download "NR-DA/NDR-DA Reach Trucks"

Colin Daniel
5 years ago
Views:

NR-DA/NDR-DA Trucks 3,000 3,500 4,000 lbs Yale NR/NDR-DA reach trucks combine the latest technology with improved performance to effectively meet the demands of high density warehousing.

1 NR-DA/NDR-DA Trucks 3,000 3,500 4,000 lbs Yale NR/NDR-DA reach trucks combine the latest technology with improved performance to effectively meet the demands of high density warehousing. Operator's compartment features a new movement forward in ergonomic design. The NR/NDR-DA offers two (2) operator compartments, the side-stance and the fore/aft stance compartments. The fully padded operator's compartment provides back and hip support. The noticeable non-pedal large floor has room for movement and is equipped with an Operator Presence Switch. The side stance operator compartment has a large backrest pad with integral lumbar and armrest support. Mounted to the armrest pad is the multi-function control assembly. The multi-function control assembly is adjustable 3 inches in and out. The control handle is ergonomically designed with an integral palm rest and can be comfortably operated. The handle provides conveniently located controls for forward/reverse, lift/lower, 2-speed reach/retract, tilt, horn and optional sideshift. The fore/aft stance compartment provides a support point for the operator when facing in either direction. The multi-function handle assembly is a new single axis design and is mounted on the side pad assembly. The single axis design provides additional dynamic support point for operator when facing forward. The optional Aft Travel Control Handle with Laser Operator Detection provides speed & direction control when the operator is facing aft. CANbus Technology streamlines digital communications between truck systems through one main master controller. Dash display and traction controller are controlled via the CANbus network. The CANbus controller reduces wiring and electrical connections, resulting in improved reliability and improved visibility through the mast. AC Motors include traction and main hydraulics. AC motor technology delivers high motor efficiency, braking torques, and powerful acceleration. A speed sensor built into the motor provides feedback to the control system, allowing motor speed and direction to be continuously monitored. A thermal protection system controls the power delivered to the motor. In addition, increased motor maintenance interval is achieved through the brushless design of the auxiliary hydraulics and steer motors. Drive unit uses a double gear reduction drive train with permanently lubricated steer bearing. Yale Hi-Vis mast is available in triplex configurations for various heights. The trunnion mounted mast design provides for good load distribution and allows for easy service. The hydraulic cylinder incorporates a chrome plated rod for corrosion resistance. The cylinders are easily serviced and provide integral cushioning for excellent mast channel staging. Velocity fuses are provided to control lowering Capacity NR NDR 3000 in the event of hydraulic failure. A manual lowering valve is standard. Brake is spring applied and electrically released. Mounted above the drive motor and controlled by the Vehicle System Manager (VSM), the assembly provides emergency stopping and parking brake for the truck. Vehicle System Manager (VSM) is an electronic module that monitors all truck functions. The VSM is the CANbus network master node and includes the vehicle application software. Built with input/output capability, the system monitors inputs from the operator, vehicle performance and simultaneously adjusting the vehicle operation for the best performance. Dash display Two dash displays are offered with the truck, the standard display and the premium display. The standard display provides status, warning, and fault messages to the operator. The display has input for operator to change drive mode from rabbit through turtle. It also provides setup and diagnostic menus for service technician. Hour meters for truck, traction, hoist, and auxiliary systems are also accessible through the menus. The optional premium display has all the same features as the standard display. In addition, the display provides larger text output, an integrated operator check list and maintenance reminder. Console covers are thermally formed. The covers are easy to remove, providing access to main electrical components. mechanism includes strong rear frame weldment and inner arm weldment cross-members. The open carriage design and optimal hose routing provide (continued on back page) Truck shown with optional equipment

2 MAST TABLE Overall Lowered Height NR DA & NDR030DA - TRIPLEX HI-VIS MAST (5.5" STANDARD) Fork Height Top of Forks Free Lift Overall Height (Mast Extended) Highest Point with 36 High LBR Overhead Guard Height to Top Operator Clearance in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. Head Length (Length to Face of Forks) 12.5" or 14.5 B.C. Single 14.5" B.C B.C Double Single Double Right Angle Aisle Stacking ("RAS" TABLE) Note: These are "Zero Clearance" aisles and require an additional 6" to 12" to be added to provide for easier maneuvering. NR035/040DA Truck with 12.5" or 14.5" Battery Compartment and 42" ID Triplex - 4" Between Loads Pallet Width (inches) Pallet Length (inches) Add 1" for Sideshift Add 2" for 16.5" Battery Compartment SPACING LOAD WIDTH LOAD LENGTH NDR030DA Truck with 14.5" Battery Compartment and 42" ID Triplex - 4" Between Loads Pallet Width (inches) Pallet Length (inches) Sideshift is Standard on Double ZERO CLEARANCE AISLE WIDTH RIGHT ANGLE STACKING AISLE LAYOUT NDR030DA Truck with 16.5" Battery Compartment and 42" ID Triplex - 4" Between Loads Pallet Width (inches) Pallet Length (inches) Sideshift is Standard on Double

3 (181) NR035DA 7.3 (185) NR040DA 24.0 (610) 36.0 (914) Width Across Mast Channels 30.0" (762) 5.5" Mast 16 Sidestance Model Lowered 56.5 (1435) Raised 62.5 (1588) Forward Stance Model 55.5 (1410) 7.1 (181) battery roller ht. 9.6 (244) 10.3 (262) (127) X 3.9 (99) 2.0 (50.8) 6.6 (168) 5.1 (0) WELD-ON BOX 5.1 (0) 21.6 (345) 42.0 (1067) 36.0 (914) Width Across Mast Channels 30.0" (762) 5.5" Mast 16 Sidestance Model Lowered 56.5 (1435) Raised 62.5 (1588) Forward Stance Model 55.5 (1410) 7.1 (181) battery roller ht. 9.6 (244) 5.1 (0) 5.1 (0) 10.3 (262) (50.8) 8.0 (203) 5.0 (127) x 3.9 (99) WELD-ON BOX 8.6 (218) Circled dimensions correspond to the line numbers on the tabulated chart inside the spec sheet. Dimensions are in inches (millimeters).

4 Chassis 42.8" (1087) 3.9 (100) 30.0 (762) 14.2 (360) O.H.G. Width 42.1 (1070) (127) x 3.9 (99) 5.6 (143) WELD-ON LOAD BOX 4.6 (117) 1 Manufacturer Manufacturer s Name Yale 2 Model Designation Manufacturer s Model Designation NR035DA 3 Model Configuration Wheel Base Designation ² SWB 4 Rated Capacity Load Capacity lbs (1588) 5 Load Center Distance in. 24 (610) 6 Power type Electric, Diesel, LPG Electric - 24 volt 7 Operator type Pedestrian, Stand, Seated Rider Stand 8 Tire type Load / Caster / Drive Poly / Poly / Rubber 9 Wheels (x = driven) Load / Drive 4 / 2 (1x) 10 Truck Weight without Battery (approximate) lbs Front Rear Axle Loading - Front / Rear with Assembly Retracted 12 Static with Rated Load and Max. Wt. Battery lbs Standard Lift (Max Fork Height) in. (mm) 14 Standard Mast Lowered (OALH) in. (mm) 15 Freelift (Max Fork Height) in. (mm) Mast Triplex Hi-Vis 16 Standard Mast Extended w/ LBR in. (mm) See Mast Table 17 Top of OHG in. (mm) 18 Operator Clearance in. (mm) 19 Carriage Tilt Angle (forward / back) degrees 3 Fwd / 4 Back 20 Forks Standard (length x width x thickness) in x 3.9 x Headlength to Face of Forks ¹ All - Battery Compartments in. See Mast Table 22 Outrigger ID in (1 increments) 12.5 Battery Compartment in x 12.5 x Battery Compartment Size - Length x Width x Height 14.5 Battery Compartment in x 14.5 x Battery Compartment in x 16.5 x Battery Compartment in Turning Radius - Minimum Outside ¹ 14.5 Battery Compartment in Battery Compartment in Aisle Width - Zero Clearance - Right Angle Stack ¹ see chart See RAS Table 26 Stability - Comply with ANSI * Yes 28 Rearward (chasis first) - Empty / Rated Load mph 6.5/6.5 Travel Speed 29 Forward ( forks first) - Empty / Rated Load mph 6.5/ Empty ft/min ft/min ft/min 43 Lift Speed ft/min ft/min N/A ft/min N/A 37 Empty ft/min 85 Lowering Speeds - Standard / Optional 38 Rated Load ft/min Size - front load wheels (tandem articulating) Standard 5 x Drive Caster Size - drive tire / dual casters 41 Standard 12.0 x x Battery Compartment in Wheel Base 14.5 Battery Compartment in Battery Compartment in Method of Control Foot Brakes, service / parking 44 Method of Operation Spring Apply / Electric Release 45 Battery, type Lead Acid 46 Traction motor rating (60 minute rating) hp (kw) 7.5 (5.6) 47 Hoist motor rating (5 minute rating) hp (kw) 14.8 (11.0) 48 Electric Motors Traction motor control method Transistor 49 Hoist motor control method Transistor 50 Number of speeds Infinitely Variable General WT. Dimensions Performance Wheels & Tires Electric ¹ Single - add 1" for Sideshift, Double is standard with Sideshift ² Short or Long Wheelbase is for Double Only. Short Wheelbase is used on masts over 278".

5 Chassis 42.8" (1087) 3.9 (100) 30.0 (762) 14.2 (360) O.H.G. Width 42.1 (1070) (117) 5.0 (127) x 3.9 (99) WELD-ON BOX 5.6 (143) Yale 1 NR035DA NR040DA NR040DA NDR030DA NDR030DA 2 SWB SWB SWB LWB LWB (1588) 4000 (1814) 4000 (1814) 3000 (61) 3000 (61) 4 24 (610) 24 (610) 24 (610) 24 (610) 24 (610) 5 Electric - 36 volt Electric - 24 volt Electric - 36 volt Electric - 24 volt Electric - 36 volt 6 Stand Stand Stand Stand Stand 7 Poly / Poly / Rubber Poly / Poly / Rubber Poly / Poly / Rubber Poly / Poly / Rubber Poly / Poly / Rubber 8 4 / 2 (1x) 4 / 2 (1x) 4 / 2 (1x) 4 / 2 (1x) 4 / 2 (1x) Front Rear Front Rear Front Rear Front Rear Front Rear Chassis " (1087) 3.9 (100) (762) 15 See Mast Table See Mast Table See Mast Table See Mast Table 14.2 (360) See Mast Table 16 O.H.G. 17 Width Fwd / 4 Back (1070) 3 Fwd / 4 Back 3 Fwd / 4 Back 3 Fwd / 4 Back 3 Fwd / 4 Back x 3.9 x x 3.9 x x 3.9 x x 3.9 x x 3.9 x See Mast Table See Mast Table See Mast Table See Mast Table See Mast Table (1 increments) (1 increments) (1 increments) (1 increments) (1 increments) x 12.5 x x 12.5 x x 12.5 x 31.5(143) N/A (117) N/A 39.0 x 14.5 x x 14.5 x x 14.5 x x 14.5 x x 14.5 x x 16.5 x x 16.5 x (127) x (99) x 16.5 x (127) 39.0 x 2.9 x (74) 16.5 x x 16.5 x 31.5 WELD-ON LOAD BOX N/A N/A See RAS Table See RAS Table See RAS Table See RAS Table See RAS Table 25 Yes Yes Yes Yes Yes / / / / / / / / / / N/A N/A 34 N/A N/A N/A 35 N/A N/A N/A N/A N/A x x x x x Drive Caster Drive Caster Drive Caster Drive Caster Drive Caster x x x x x x x x x x N/A N/A Foot Foot Foot Foot Foot 43 Spring Apply / Electric Release Spring Apply / Electric Release Spring Apply / Electric Release Spring Apply / Electric Release Spring Apply / Electric Release 44 Lead Acid Lead Acid Lead Acid Lead Acid Lead Acid (5.6) 7.5 (5.6) 7.5 (5.6) 7.5 (5.6) 7.5 (5.6) (11.0) 14.8 (11.0) 14.8 (11.0) 14.8 (11.0) 14.8 (11.0) 47 Transistor Transistor Transistor Transistor Transistor 48 Transistor Transistor Transistor Transistor Transistor 49 Infinitely Variable Infinitely Variable Infinitely Variable Infinitely Variable Infinitely Variable General WT. Dimensions Performance Wheels & Tires Electric

6 good visibility. The two speed reach/ retract cylinders are fully cushioned for smooth operation. Pivot points have grease fittings for lubrication, and dual tilt cylinders are used to evenly distribute the load. Hydraulic functions of the truck are managed by the VSM. The system features a Motor Controller, AC Hoist Motor, Pump and Hydraulic Reservoir. Efficient design and the use of O-ring face seals have allowed significant reduction of hydraulic fittings reducing potential leak points. Frame features a fixed drive unit mounting with spring loaded caster assembly to compensate for uneven floors. It also incorporates thick plates, strong rear frame, and mast connections for enhanced durability. The frame is available in various battery compartment sizes based on truck capacity. The frame is available in 12.5 inches, 14.5 inches and 16.5 inches for the 3500 lb. and 4000 lb. trucks. The 16.5 inch battery compartment is available for the 3000 lb. double reach model. All wiring is numbered for easy trouble-shooting and meets the UL 583 requirements. Sealed electrical connectors are used throughout the truck. Electrical connections are provided for convenient field installation of electric options. Additional features include a bolt-on 36 inch (910 mm) high load backrest extension and 42 inch (1067 mm) long hook type forks as standard. All nonsealed friction points are equipped with grease fittings. The truck is painted gold, parchment, and black. Truck performance may be affected by the condition of the vehicle, how it is equipped and the application. Consult your Yale Industrial Truck Dealer if any of the information shown is critical to your application. Specifications are subject to change without notice. This truck meets all design specifications of ANSI B56.1 Safety Standard for Powered Industrial Trucks at the time of manufacture. Classified by Underwriters Laboratories, Inc. as to fire hazard only. The Yale products included in this document may be covered by US patent 6,684,148 and other patents pending. Yale, the Yale Logo, Veracitor TM VX and Yale Global Hi Vis TM Mast are trademarks or registered tradmarks of Yale Material Handling Corporation in the United States and other countries. Options RF Terminal Bracket RF Handheld Scanner Holder Impact Monitor Audible Alarm Reverse Operated Forward and Reverse Operation Forward/Reverse and Lift/Lower Operation Visible Alarm Amber Strobe (Continuous operation with Key-on) Amber Strobe (Forward and Reverse Operation) Lights Operator Desktop LED Light (OHG Mounted) Dual Headlight 12 Volt (OHG Mounted) Rear Worklight 12 Volt (OHG Mounted) Operator Compartment Rear Door Various Fork Lengths Various I.D. Outriggers Operator Overhead Fan Cooler/Freezer Package Sideshifter (Standard on the Double ) Various Load Wheels and Drive Tires Steer Caster Electrically Steered Side Stance With Comfort Package Fore/Aft Stance With Comfort Package BATTERY SPECIFICATIONS Battery Capacity Battery Dimensions Min Batt Max Batt Compartment Battery 6 Hour Rate Weight Weight Size Voltage X Max. Y Max. Z Max. amp hr kw hr in. (mm) in. (mm) in. (mm) lb. (kg) lb. (kg) (985) (311) 31.0 (788) 1400 (635) 1900 (862) X 406 TYP. (16 in.) (985) (362) 31.0 (788) 1600 (726) 2100 (953) Z (985) (362) 31.0 (788) 1600 (726) 2100 (953) 16.5" (985) (4) 31.0 (788) 1850 (839) 2350 (1066) Y 16.5" (985) (4) 31.0 (788) 1850 (839) 2350 (1066) Battery Connector: 36V - Gray; Position B Manufacturers Standard Cable Size Not to Exceed 4/0 AWG Battery compartment is designed to accommodate standard wet cell batteries with fixed lifting eyes and no cover. Contact Applications Engineering to verify compatibility/fit when using maintenance free, covered or non-standard batteries. Yale Materials Handling Corporation P.O. Box 7367, Greenville, North Carolina /10 Copyright 2010 Yale Materials Handling Corporation Printed in U.S.A. Manufactured in our own ISO 9001:2000 Registered Facilities

NR-EA/NDR-EA Reach Trucks

NR-EA/NDR-EA Reach Trucks NR-EA/NDR-EA Trucks 3,000 3,500 4,000 4,500 lbs Yale NR/NDR-EA reach trucks combine the latest technology with improved performance to effectively meet the demands of high density warehousing. Operator's