Bicycle Hardware in the Loop Simulator for Braking Dynamics Assistance System
|
|
|
- John Caldwell
- 5 years ago
- Views:
Transcription
1 Bicycle Hardware in the Loop Simulator for Braking Dynamics Assistance System IPG Apply & Innovate 2016 Conference Session: Off Highway Cornelius Bott, Martin Pfeiffer, Oliver Maier, Jürgen Wrede
2 Outline Introduction to BikeSafe Motivation Vision Methodology HIL Testbench Structure and Components Usage in Development Results Conclusion 2
3 Motivation for Active Safety Systems on Bicycles Front wheel lockup Bicycle braking systems Properly adjusted: always very powerful Modern hydraulic technology: stronger and more robust High risk of falling due to users mistakes Sources: Gustav Magenwirth GmbH, Robert Bosch GmbH Low wheel moment of inertia Risk of overbraking Mainly on roads with low friction coefficient & in curves Nose over (falling over the handlebars) High centre of gravity Emergency or shock braking Mainly on roads with high friction coefficient & downhill Electrified bicycles Availability of electric energy Favourable mass & cost ratio 3
4 Vision Functional Prototype Actuator Purpose: brake pressure modulation Hydraulic unit of motorcycle ABS Control unit Purpose: algorithm development Rapid control prototyping system Sensors Measurand: front wheel speed Active sensor based on Hall Effect Measurands: 1) longitudinal and vertical accelerations 2) pitch rate Micromechanical sensor unit 4
5 Mechatronic Structure of the Braking Dynamics Assistance System (BDA) Driver Environment Controller ud z u y x r Actuators Plant Sensors 5
6 Methodology of Development Requirements Profile Proof of Concept 1 Accident research and respective applications Validation 5 Functional model evaluation 2 Requirements identification and quantification Validation 4 System integration and testing 3 System design and implementation 6
7 Structure of HiL Testbench User PC Parameters, Stimuli Measurement Values Simulation Xeno Realtime Computer BDA Function Measurement Values Experiment Sensor Signals Bicycle Model I/O Modules CarMaker dspace MAB Hardware Installation Measurement Values Brake System Brake Actuation Control Signals HU Bosch HU Hydraulic Brake Pneumatic System 7
8 Simulation Model Equation based Model with three Bodies 4DoF Physical Multi Body Model 13 DoF Software: Simulink Features: Static effects of hydraulic brake system Plain movement (longitudinal and vertical) Driver is modeled as a point mass Code generation and cross compilation fully supported Software: SimHydraulics/ SimMechanics Extensions: Dynamic effects of brake hydraulic Repeated rear wheel lift off Movement of driverduringbrakeprocess Code generation and cross compilation supported except for tyre model 8
9 Real Time Computer & M Modules M400 WheelSpeed M62N Analog Outputs M36N00 Analog Inputs M51 4x CAN Front and Measurement Brake force Pressure sensors Rear Wheel Trigger Measurement Acceleration sensors 60 Teeths Lift Off Sensor Brake leversensor 9
10 HiL Testbench Battery Charge amplifier Brake force sensor Real time computer RCP System Brake lever 10
11 Video of automated braking system Pressure: 100bar Gradient: 1000bar/s Controllable movement Conditions can be reproduced 11
12 Usage in Development MiL HiL Real Experiment Wheel Speed Signal Analysis under real conditions Investigation of hydraulic brake system (especially HU) Cover a wider parameter space Reproducibility 12
13 Results BDA Function not engaged 13
14 Results BDA Function engaged 14
15 Conclusion Usage of HIL for development of a BDA function Requirements for BikeSafe function development were met Very useful for investigation of Brake System and HU Good validation of BDA function before real experiments Limitations of BDA function could be accessed Transfer of known method to a new domain 15
16 Thank you for your attention! 16
MORSE: MOdel-based Real-time Systems Engineering. Reducing physical testing in the calibration of diagnostic and driveabilty features
MORSE: MOdel-based Real-time Systems Engineering Reducing physical testing in the calibration of diagnostic and driveabilty features Mike Dempsey Claytex Future Powertrain Conference 2017 MORSE project
Implementation of a Control Concept for the Car-in-the-Loop Test Rig on the IPG Xpack4 Real-Time Target
Implementation of a Control Concept for the Car-in-the-Loop Test Rig on the IPG Xpack4 Real-Time Target Kevin Engleson Control Concepts for the Car-in-the-Loop Test Rig Institut für Mechatronische Systeme
SPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
SPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
Modification of IPG Driver for Road Robustness Applications
Modification of IPG Driver for Road Robustness Applications Alexander Shawyer (BEng, MSc) Alex Bean (BEng, CEng. IMechE) SCS Analysis & Virtual Tools, Braking Development Jaguar Land Rover Introduction
MXSTEERINGDESIGNER MDYNAMIX AFFILIATED INSTITUTE OF MUNICH UNIVERSITY OF APPLIED SCIENCES
MDYNAMIX AFFILIATED INSTITUTE OF MUNICH UNIVERSITY OF APPLIED SCIENCES MXSTEERINGDESIGNER AUTOMATED STEERING MODEL PARAMETER IDENTIFICATION AND OPTIMIZATION 1 THE OBJECTIVE Valid steering models Measurement
itpms-in-the-loop Solution for Comprehensive Validation Tasks for indirect Tire Pressure Monitoring Systems According to the New ECE-R 64 Regulation
Taking you to the next level apply & Innovate 2012, IPG Technology Conference, Karlsruhe, 21 and 22 June 2012 itpms-in-the-loop Solution for Comprehensive Validation Tasks for indirect Tire Pressure Monitoring
Maneuver based testing of integrated vehicle safety systems
Maneuver based testing of integrated vehicle safety systems Rudolf Ertlmeier 1 Kathrin Sattler 1, Andreas Raith 1, Thomas Brandmeier 1 Daouda Sadou 2, Christian Schyr 3 1 Institute for Applied Research
Low Carbon Technology Project Workstream 8 Vehicle Dynamics and Traction control for Maximum Energy Recovery
Low Carbon Technology Project Workstream 8 Vehicle Dynamics and Traction control for Maximum Energy Recovery Phil Barber CENEX Technical review 19 th May 2011 Overview of WS8 Workstream 8 was set up to
MoBEO: Model based Engine Development and Calibration
MoBEO: Model based Engine Development and Calibration Innovative ways to increase calibration quality within the limits of acceptable development effort! Dr. Prakash Gnanam, AVL Powertrain UK Ltd 1 25
VEHICLE DYNAMICS BASED ABS ECU TESTING ON A REAL-TIME HIL SIMULATOR
HUNGARIAN JOURNAL OF INDUSTRIAL CHEMISTRY VESZPRÉM Vol. 39(1) pp. 57-62 (2011) VEHICLE DYNAMICS BASED ABS ECU TESTING ON A REAL-TIME HIL SIMULATOR K. ENISZ, P. TÓTH, D. FODOR, T. KULCSÁR University of
dspace GmbH Rathenaustr Paderborn Germany dspace Technology Conference Workshop #2
dspace Engineering - Mechatronic Test Benches Matthias Deter Group Manager Engineering E-Drive Applications dspace Technology Conference 2017 Workshop #2 dspace GmbH Rathenaustr. 26 33102 Paderborn Germany
Use of Simpack at the DaimlerChrysler Commercial Vehicles Division
Use of Simpack at the DaimlerChrysler Commercial Vehicles Division Dr. Darko Meljnikov 22.03.2006 Truck Product Creation (4P) Content Introduction Driving dynamics and handling Braking systems Vehicle
Mathematical modeling of the electric drive train of the sports car
1 Portál pre odborné publikovanie ISSN 1338-0087 Mathematical modeling of the electric drive train of the sports car Madarás Juraj Elektrotechnika 17.09.2012 The present electric vehicles are using for
Using Virtualization to Accelerate the Development of ADAS & Automated Driving Functions
Using Virtualization to Accelerate the Development of ADAS & Automated Driving Functions GTC Europe 2017 Dominik Dörr 2 Motivation Virtual Prototypes Virtual Sensor Models CarMaker and NVIDIA DRIVE PX
Comprehensive and Cross-domain Vehicle Simulation for Electrification
Comprehensive and Cross-domain Vehicle Simulation for Electrification IPG apply & innovate 2014 2014 09-24 Powertrain Systems - Christian Appel, Ralf Kleemann Vehicle Systems - Benjamin Leidel Chassis
Integration of EtherCAT in Advanced Test Systems Solutions and Challenges. Dr. Frank Schütte, Andreas Tenge, Dr. László Juhász dspace GmbH, Paderborn
Integration of EtherCAT in Advanced Test Systems Solutions and Challenges Dr. Frank Schütte, Andreas Tenge, Dr. László Juhász dspace GmbH, Paderborn ETG 2013 Introduction Actual developments in the mobile
System-level design of electrohydraulic and mechatronic systems
System-level design of electrohydraulic and mechatronic systems 2008 The MathWorks, Inc. Steve Miller Technical Marketing, Physical Modeling Tools The MathWorks GmbH, Munich, Germany Steve.Miller@mathworks.de
VIRTUAL HYBRID ON THE ENGINE TEST BENCH SMART FRONTLOADING
VIRTUAL HYBRID ON THE ENGINE TEST BENCH SMART FRONTLOADING RDE ENGINEERING [EIL] J. GERSTENBERG, DR. S. STERZING-OPPEL, C. FISCHER, B. SEIDEL, D. TRENKLE, M. OFF, DR. M. GLORA Overview RDE tool chain Virtual
Torque-Vectoring Control for Fully Electric Vehicles: Model-Based Design, Simulation and Vehicle Testing
Torque-Vectoring Control for Fully Electric Vehicles: Model-Based Design, Simulation and Vehicle Testing Leonardo De Novellis, Aldo Sorniotti, Patrick Gruber University of Surrey, UK a.sorniotti@surrey.ac.uk
Higher, Faster, Further. damping control for turntable ladders. dspace Magazine 2/2009 dspace GmbH, Paderborn, Germany
PAGE 30 Universität Stuttgart / IVECO magirus Higher, Faster, Further Active damping control for turntable ladders PAGE 31 Turntable ladders nowadays are required to go higher, faster, further and be safer.
Dipl.-Ing. Thorsten Pendzialek Dipl.-Ing. Matthias Mrosek. Model-Based Testing of Driver Assistance Systems for Counterbalance Forklift Trucks
Dipl.-Ing. Thorsten Pendzialek Dipl.-Ing. Matthias Mrosek Model-Based Testing of Driver Assistance Systems for Counterbalance Forklift Trucks Outline Motivation for the Introduction of Model-Based Testing
Estimation of light commercial vehicles dynamics by means of HILtestbench
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Estimation of light commercial vehicles dynamics by means of HILtestbench simulation To cite this article: A Groshev et al 2018
Momentu. Brake-by-Wire Gathers. HIL Test System for Developing a 12-V Brake-by-Wire System BRAKE-BY-WIRE SYSTEMS
PAGE 14 BRAKE-BY-WIRE SYSTS Brake-by-Wire Gathers omentu HIL Test System for Developing a 12-V Brake-by-Wire System PAGE 15 The future of the brake is electric (brake-bywire system). An electric motor
Preliminary Study on Quantitative Analysis of Steering System Using Hardware-in-the-Loop (HIL) Simulator
TECHNICAL PAPER Preliminary Study on Quantitative Analysis of Steering System Using Hardware-in-the-Loop (HIL) Simulator M. SEGAWA M. HIGASHI One of the objectives in developing simulation methods is to
GENERIC EPS MODEL Generic Modeling and Control of an Electromechanical Power Steering System for Virtual Prototypes
GENERIC EPS MODEL Generic Modeling and Control of an Electromechanical Power Steering System for Virtual Prototypes Dipl.-Ing. Roman Mannale, Volker Ewald, Dr.-Ing. Markus Bauer Adam Opel AG, Control Systems
FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER
GT-SUITE USERS CONFERENCE FRANKFURT, OCTOBER 20 TH 2003 FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER TEAM OF WORK: A. GALLONE, C.
Automated Testing in Automotive Software Development using Vehicle System Simulation
Automated Testing in Automotive Software Development using Vehicle System Simulation Oliver Philipp, Martin Ehmann TESIS DYNAware GmbH, www.tesis-dynaware.com 1 Defect Rate Cost for Defect Fix Motivation:
COMPUTATIONAL MODEL OF THE AVIATION DIESEL ENGINE FOR HIL TESTING
COMPUTATIONAL MODEL OF THE AVIATION DIESEL ENGINE FOR HIL TESTING Pavel Kučera 1, Václav Píštěk 2, David Svída 3, Martin Beran 4 Summary: This article deals with the development of a computational diesel
Powertrain and Chassis Hardware-in-the- Loop (HIL) Simulation of Ford s Autonomous Vehicle Platform
Powertrain and Chassis Hardware-in-the- Loop (HIL) Simulation of Ford s Autonomous Vehicle Platform Adit Joshi Research Engineer Automated Driving HIL Simulation Ford Motor Company 1 OUTLINE Autonomous
Multi-ECU HiL-Systems for Virtual Characteristic Rating of Vehicle Dynamics Control Systems
Multi-ECU HiL-Systems for Virtual Characteristic Rating of Vehicle Dynamics Control Systems Dipl.-Ing. Ronnie Dessort, M.Sc. Philipp Simon - TESIS DYNAware GmbH Dipl.-Ing. Jörg Pfau - Audi AG VDI-Conference
OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018
OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018 M.Sc. Oleg Krecker, PhD candidate, BMW B.Eng. Christoph Hiltner, Master s student, Affiliation BMW AGENDA
Experience the Hybrid Drive
Experience the Hybrid Drive MAGNA STEYR equips SUV with hybrid drive Hybrid demo vehicle with dspace prototyping system To integrate components into a hybrid vehicle drivetrain, extensive modification
Co-Simulation of GT-Suite and CarMaker for Real Traffic and Race Track Simulations
Co-Simulation of GT-Suite and CarMaker for Real Traffic and Race Track Simulations GT-Suite Conference Frankfurt, 26 th October 215 Andreas Balazs, BGA-T Agenda Introduction Methodology FEV GT-Drive model
Building Fast and Accurate Powertrain Models for System and Control Development
Building Fast and Accurate Powertrain Models for System and Control Development Prasanna Deshpande 2015 The MathWorks, Inc. 1 Challenges for the Powertrain Engineering Teams How to design and test vehicle
development of hybrid electric vehicles
IPG Technology Conference Karlsruhe 2012 A multi physical simulation architecture to support the development of hybrid electric vehicles James Chapman CAE Simulation Group Jaguar Land Rover Embedded Systems
Highly dynamic control of a test bench for highspeed train pantographs
PAGE 26 CUSTOMERS Highly dynamic control of a test bench for highspeed train pantographs Keeping Contact at 300 km/h Electric rail vehicles must never lose contact with the power supply, not even at the
University Of California, Berkeley Department of Mechanical Engineering. ME 131 Vehicle Dynamics & Control (4 units)
CATALOG DESCRIPTION University Of California, Berkeley Department of Mechanical Engineering ME 131 Vehicle Dynamics & Control (4 units) Undergraduate Elective Syllabus Physical understanding of automotive
Vehicle Simulation for Engine Calibration to Enhance RDE Performance
Vehicle Simulation for Engine Calibration to Enhance RDE Performance IPG Apply & Innovate 2018 11st and 12nd of September, Karlsruhe, Germany Dr. Yutaka Murata Yui Nishio Dr. Yukihisa Yamaya Masato Kikuchi
VR-Design Studio Car Physics Engine
VR-Design Studio Car Physics Engine Contents Introduction I General I.1 Model I.2 General physics I.3 Introduction to the force created by the wheels II The Engine II.1 Engine RPM II.2 Engine Torque II.3
STUDY OF AN ARTICULATED BOOM LIFT BY CO- SIMULATION OF BODIES FLEXIBILITY, VEHICLE DYNAMICS AND HYDRAULIC ACTUATION
Georgia Institute of Technology Marquette University Milwaukee School of Engineering North Carolina A&T State University Purdue University University of California, Merced University of Illinois, Urbana-Champaign
Development of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics.
Development of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics. http://dx.doi.org/10.3991/ijoe.v11i6.5033 Matthew Bastin* and R Peter
Identification of tyre lateral force characteristic from handling data and functional suspension model
Identification of tyre lateral force characteristic from handling data and functional suspension model Marco Pesce, Isabella Camuffo Centro Ricerche Fiat Vehicle Dynamics & Fuel Economy Christian Girardin
A Methodology to Investigate the Dynamic Characteristics of ESP Hydraulic Units - Part II: Hardware-In-the-Loop Tests
A Methodology to Investigate the Dynamic Characteristics of ESP Hydraulic Units - Part II: Hardware-In-the-Loop Tests Aldo Sorniotti Politecnico di Torino, Department of Mechanics Corso Duca degli Abruzzi
Full Vehicle Durability Prediction Using Co-simulation Between Implicit & Explicit Finite Element Solvers
Full Vehicle Durability Prediction Using Co-simulation Between Implicit & Explicit Finite Element Solvers SIMULIA Great Lakes Regional User Meeting Oct 12, 2011 Victor Oancea Member of SIMULIA CTO Office
INCREASING ENERGY EFFICIENCY BY MODEL BASED DESIGN
INCREASING ENERGY EFFICIENCY BY MODEL BASED DESIGN GREGORY PINTE THE MATHWORKS CONFERENCE 2015 EINDHOVEN 23/06/2015 FLANDERS MAKE Strategic Research Center for the manufacturing industry Integrating the
SIMULATION AND DATA XPERIENCE
SIMULATION AND DATA XPERIENCE AVL Solutions Overview in context of RDE AVL List GmbH Dr. F. Pfister, Dr. C. Schyr, Dr. T. Düser, B. Schick, Dr. B. Behr CHALLENGES OF REAL DRIVING EMISSION Real Driving
COUPLING HIL-SIMULATION, ENGINE TESTING AND AUTOSAR- COMPLIANT CONTROL UNITS FOR HYBRID TESTING
UNIVERSITY OF PITESTI FACULTY OF MECHANICS AND TECHNOLOGY SCIENTIFIC BULLETIN AUTOMOTIVE series, year XV, no.19, vol. B COUPLING HIL-SIMULATION, ENGINE TESTING AND AUTOSAR- COMPLIANT CONTROL UNITS FOR
TRANSMISSION COMPUTATIONAL MODEL IN SIMULINK
TRANSMISSION COMPUTATIONAL MODEL IN SIMULINK Pavel Kučera 1, Václav Píštěk 2 Summary: The article describes the creation of a transmission and a clutch computational model. These parts of the powertrain
ASM Brake Hydraulics Model. dspace Automotive Simulation Models ASM Brake Hydraulics Model
ASM Brake Hydraulics Model dspace Automotive Simulation Models ASM Brake Hydraulics Model dspace Automotive Simulation Models ASM Brake Hydraulics Model Real-time brake hydraulics model Key Features Open
ESC-HIL TEST SYSTEM SOLUTIONS FOR VIRTUAL TEST DRIVING
ESC-HIL TEST SYSTEM SOLUTIONS FOR VIRTUAL TEST DRIVING Table of Contents Motivation 3 System at a Glance 4 General Description 5 Block Diagram (example configuration) 6 Use Cases 7 Verification and Validation
ABS. Prof. R.G. Longoria Spring v. 1. ME 379M/397 Vehicle System Dynamics and Control
ABS Prof. R.G. Longoria Spring 2002 v. 1 Anti-lock Braking Systems These systems monitor operating conditions and modify the applied braking torque by modulating the brake pressure. The systems try to
Five Cool Things You Can Do With Powertrain Blockset The MathWorks, Inc. 1
Five Cool Things You Can Do With Powertrain Blockset Mike Sasena, PhD Automotive Product Manager 2017 The MathWorks, Inc. 1 FTP75 Simulation 2 Powertrain Blockset Value Proposition Perform fuel economy
ATA Series (Patented)
ATA Series (Patented) Two Position Actuators Only 24 VDC supply No compressed air needed Very fast response Controllable holding force 49 Introduction to ATA actuator The ATA is a two position, direct
TECHNICAL NOTE. NADS Vehicle Dynamics Typical Modeling Data. Document ID: N Author(s): Chris Schwarz Date: August 2006
TECHNICAL NOTE NADS Vehicle Dynamics Typical Modeling Data Document ID: N06-017 Author(s): Chris Schwarz Date: August 2006 National Advanced Driving Simulator 2401 Oakdale Blvd. Iowa City, IA 52242-5003
Improving Heavy Vehicle Emergency Braking Systems. Jonathan Miller and David Cebon Cambridge University, UK
Improving Heavy Vehicle Emergency Braking Systems Jonathan Miller and David Cebon Cambridge University, UK Presentation Overview Introduction Sliding Mode Slip Control Friction and Brake Gain Estimation
Calibration. DOE & Statistical Modeling
ETAS Webinar - ASCMO Calibration. DOE & Statistical Modeling Injection Consumption Ignition Torque AFR HC EGR P-rail NOx Inlet-cam Outlet-cam 1 1 Soot T-exhaust Roughness What is Design of Experiments?
Beyond Standard. Dynamic Wheel Endurance Tester. Caster Concepts, Inc. Introduction: General Capabilities: Written By: Dr.
Dynamic Wheel Endurance Tester Caster Concepts, Inc. Written By: Dr. Elmer Lee Introduction: This paper details the functionality and specifications of the Dynamic Wheel Endurance Tester (DWET) developed
USING OF dspace DS1103 FOR ELECTRIC VEHICLE MODELING
USING OF dspace DS1103 FOR ELECTRIC VEHICLE MODELING T. Haubert, T. Hlinovsky, P. Mindl Czech Technical University in Prague, Faculty of El. Engineering, Dept. of El. Drives and Traction Abstract This
SESSION 2 Powertrain. Why real driving simulation facilitates the development of new propulsion systems
SESSION 2 Powertrain Why real driving facilitates the development of new propulsion systems CO 2 /Fuel Consumption, Pollutant Emissions, EV Range The real driving values are more and more in the public
Regenerative Braking System for Series Hybrid Electric City Bus
Page 0363 Regenerative Braking System for Series Hybrid Electric City Bus Junzhi Zhang*, Xin Lu*, Junliang Xue*, and Bos Li* Regenerative Braking Systems (RBS) provide an efficient method to assist hybrid
Simulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions. Andreas Schmidt, Audi AG, May 22, 2014
Simulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions Andreas Schmidt, Audi AG, May 22, 2014 Content Introduction Usage of collective load data in the development
Modelling and Simulation Specialists
Modelling and Simulation Specialists Multi-Domain Simulation of Hybrid Vehicles Multiphysics Simulation for Autosport / Motorsport Applications Seminar UK Magnetics Society Claytex Services Limited Software,
A dream? Dr. Jürgen Bredenbeck Tire Technology Expo, February 2012 Cologne
Rolling resistance measurement on the road: A dream? Dr. Jürgen Bredenbeck Tire Technology Expo, 14.-16. February 2012 Cologne Content Motivation Introduction of the used Measurement Equipment Introduction
Research in hydraulic brake components and operational factors influencing the hysteresis losses
Research in hydraulic brake components and operational factors influencing the hysteresis losses Shreyash Balapure, Shashank James, Prof.Abhijit Getem ¹Student, B.E. Mechanical, GHRCE Nagpur, India, ¹Student,
IMPROVED EMERGENCY BRAKING PERFORMANCE FOR HGVS
IMPROVED EMERGENCY BRAKING PERFORMANCE FOR HGVS Dr Leon Henderson Research Associate University of Cambridge, UK lmh59@cam.ac.uk Prof. David Cebon University of Cambridge, UK dc@eng.cam.ac.uk Abstract
Support of automobile transmission development with co-simulation of vehicle and driver behaviour at virtual driving tests
Support of automobile transmission development with co-simulation of vehicle and driver behaviour at virtual driving tests Michael Matthäi, Christian Petschaelis ZF Friedrichshafen AG Agenda 2 Motivation
Universal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
Parametrization of Steering Models and. Analysis of Driving Maneuvers with. MXsteeringdesigner and MXevaluation
Parametrization of Steering Models and Analysis of Driving Maneuvers with MXsteeringdesigner and MXevaluation by Matthias Becker and Matthias Niegl 20.09.2016 1 MXsteeringdesigner MXsteeringdesigner 20.09.2016
Proper Modeling of Integrated Vehicle Systems
Proper Modeling of Integrated Vehicle Systems Geoff Rideout Graduate Student Research Assistant Automated Modeling Laboratory University of Michigan Modeling of Integrated Vehicle Powertrain Systems 1
Full Vehicle Simulation for Electrification and Automated Driving Applications
Full Vehicle Simulation for Electrification and Automated Driving Applications Vijayalayan R & Prasanna Deshpande Control Design Application Engineering 2015 The MathWorks, Inc. 1 Key Trends in Automotive
USING OF dspace DS1103 FOR ELECTRIC VEHICLE POWER CONSUMPTION MODELING
USING OF dspace DS1103 FOR ELECTRIC VEHICLE POWER CONSUMPTION MODELING T. Haubert, J. Bauer, P. Mindl Czech Technical University in Prague, Faculty of El. Engineering, Dept. of El. Drives and Traction
Analysis and evaluation of a tyre model through test data obtained using the IMMa tyre test bench
Vehicle System Dynamics Vol. 43, Supplement, 2005, 241 252 Analysis and evaluation of a tyre model through test data obtained using the IMMa tyre test bench A. ORTIZ*, J.A. CABRERA, J. CASTILLO and A.
UNIFIED, SCALABLE AND REPLICABLE CONNECTED AND AUTOMATED DRIVING FOR A SMART CITY
UNIFIED, SCALABLE AND REPLICABLE CONNECTED AND AUTOMATED DRIVING FOR A SMART CITY SAE INTERNATIONAL FROM ADAS TO AUTOMATED DRIVING SYMPOSIUM COLUMBUS, OH OCTOBER 10-12, 2017 PROF. DR. LEVENT GUVENC Automated
COMPUTER AIDED MODELLING OF HYBRID MINI VAN
HUNGARIAN JOURNAL OF INDUSTRY AND CHEMISTRY VESZPRÉM Vol. 40(1) pp. 57 64 (2012) COMPUTER AIDED MODELLING OF HYBRID MINI VAN I. LAKATOS 1, V. NAGY 2, P. KŐRÖS 3, T. ORBÁN 4 1 Széchenyi István University,
Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model.
Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model. Mike Dempsey Optimised Engineering Design Conference 2016 Claytex Services Limited Software, Consultancy, Training
ENERGY ANALYSIS OF A POWERTRAIN AND CHASSIS INTEGRATED SIMULATION ON A MILITARY DUTY CYCLE
U.S. ARMY TANK AUTOMOTIVE RESEARCH, DEVELOPMENT AND ENGINEERING CENTER ENERGY ANALYSIS OF A POWERTRAIN AND CHASSIS INTEGRATED SIMULATION ON A MILITARY DUTY CYCLE GT Suite User s Conference: 9 November
Investigating two-wheeler balance using experimental bicycles and simulators
Investigating two-wheeler balance using experimental bicycles and simulators George Dialynas 1, Oliver Lee 1, Riender Happee 1, Arend Schwab 1 Francesco Celiberti 2, Marco Grottoli 2 TU Delft 1, Netherlands
Boosting the Starting Torque of Downsized SI Engines GT-Suite User s Conference 2002
GT-Suite User s Conference 2002 Hans Rohs Inst. For Combustion Engines (VKA) RWTH Aachen Knut Habermann, Oliver Lang, Martin Rauscher, Christof Schernus FEV Motorentechnik GmbH Acknowledgement: Some of
V-CAP TM A FEV VIRTUAL POWERTRAIN CALIBRATION PLATFORM
V-CAP T A FEV VITUAL POWETAIN CALIBATION PLATFO V-CAP T TEST CENTES VITUAL POWETAIN CALIBATION PLATFO V-CAP T VITUAL POWETAIN CALIBATION PLATFO VITUAL TEST BED, EAL ESULTS: A SOLUTION FO PASSENGE CA AND
Actuator Force Using Physical Modeling Tools to Design Power Optimized Aircraft
Actuator Force Using Physical Modeling Tools to Design Power Optimized Aircraft 2009 The MathWorks, Inc. Key Points 1. Testing different actuator designs in one environment saves time and encourages innovation
2015 The MathWorks, Inc. 1
2015 The MathWorks, Inc. 1 [Subtrack 2] Vehicle Dynamics Blockset 소개 김종헌부장 2015 The MathWorks, Inc. 2 Agenda What is Vehicle Dynamics Blockset? How can I use it? 3 Agenda What is Vehicle Dynamics Blockset?
Holistic 1D-Model for Cooling Management and Engine Analysis of a Heavy-Duty Truck
Holistic 1D-Model for Cooling Management and Engine Analysis of a Heavy-Duty Truck Dominik Renner Dr. Alexander Schydlo 26 th October 2015 MAN Truck & Bus AG < 1 > Agenda 1 Introduction 2 Model Description
Implementation and application of Simpackmulti-attribute vehicle models at Toyota Motor Europe
Implementation and application of Simpackmulti-attribute vehicle models at Toyota Motor Europe Ernesto Mottola, PhD. Takao Sugai Vehicle Performance Engineering Toyota Motor Europe NV/SA Technical Center
Fuzzy based Adaptive Control of Antilock Braking System
Fuzzy based Adaptive Control of Antilock Braking System Ujwal. P Krishna. S M.Tech Mechatronics, Asst. Professor, Mechatronics VIT University, Vellore, India VIT university, Vellore, India Abstract-ABS
A 6-Speed Automatic Transmission Plant Dynamics Model for HIL Test Bench
SAE TECHNICAL PAPER SERIES 28-1-63 A 6-Speed Automatic Transmission Plant Dynamics for HIL Test Bench Quan Zheng, Asif Habeebullah, Woowon Chung and Andrew Herman Delphi Corporation Reprinted From: Transmission
Simulated EV Dynamics: Safety & etvc
Simulated EV Dynamics: Safety & etvc Dr. Stephen Jones et. al., AVL List GmbH stephen.jones@avl.com +43 316 787 4484 26.09.11 ARTEMIS ARTEMIS Pollux POLLUX Project Project Process Oriented electronic control
Vehicle functional design from PSA in-house software to AMESim standard library with increased modularity
Vehicle functional design from PSA in-house software to AMESim standard library with increased modularity Benoit PARMENTIER, Frederic MONNERIE (PSA) Marc ALIRAND, Julien LAGNIER (LMS) Vehicle Dynamics
Testing with Virtual Prototype Vehicles on the Test Bench
DEVELOPMENT Real Driving Emissions Testing with Virtual Prototype Vehicles on the Test Bench IPG Automotive AUTHORS Dipl.-Ing. Christian Lensch-Franzen is Head of Engineering at APL Automobil-Prüftechnik
MSD: Case Studies D R. T A R E K A. T U T U N J I P H I L A D E L P H I A U N I V E R S I T Y, J O R D A N
MSD: Case Studies D R. T A R E K A. T U T U N J I P H I L A D E L P H I A U N I V E R S I T Y, J O R D A N 2 0 1 4 Outline Elements and design of mechatronic systems have been described in previous sections
VALIDATION OF A HUMAN-AND-HARDWARE-IN-THE- LOOP CONTROL ALGORITHM
U.P.B. Sci. Bull., Series D, Vol. 76, Iss. 4, 04 ISSN 454-58 VALIDATION OF A HUMAN-AND-HARDWARE-IN-THE- LOOP CONTROL ALGORITHM Ionuţ STOICA, Marius BĂŢĂUŞ, Mihai NEGRUŞ This study proposes the development
Multiphysics Modeling of Railway Pneumatic Suspensions
SIMPACK User Meeting Salzburg, Austria, 18 th and 19 th May 2011 Multiphysics Modeling of Railway Pneumatic Suspensions Nicolas Docquier Université catholique de Louvain, Belgium Institute of Mechanics,
Virtual Testing of the Full Vehicle System
Virtual Testing of the Full Vehicle System Mike Dempsey Claytex Services Limited Software, Consultancy, Training Based in Leamington Spa, UK Office in Cape Town, South Africa Experts in Systems Engineering,
Cornering & Traction Test Rig MTS Flat-Trac IV CT plus
Testing Facilities Cornering & Traction Test Rig MTS Flat-Trac IV CT plus s steady-state force and moment measurement dynamic force and moment measurement slip angel sweeps tests tractive tests sinusoidal
Design and Analysis of suspension system components
Design and Analysis of suspension system components Manohar Gade 1, Rayees Shaikh 2, Deepak Bijamwar 3, Shubham Jambale 4, Vikram Kulkarni 5 1 Student, Department of Mechanical Engineering, D Y Patil college
The newest Generation of our Stick-Slip Test Stand SSP-04. ZINS Ziegler-Instruments GmbH
The newest Generation of our Stick-Slip Test Stand SSP-04 ZINS Ziegler-Instruments GmbH SSP-04 Our newest Tribological Test Stand to examinate material combinations and especially to measure Stick-Slip
Real-Time Modelica Simulation on a Suse Linux Enterprise Real Time PC
Real-Time Modelica Simulation on a Suse Linux Enterprise Real Time PC Arno Ebner Martin Ganchev Helmut Oberguggenberger Franz Pirker Arsenal Research Giefinggasse 2 1210 Vienna Austria arno.ebner@arsenal.ac.at
INDEXING MODULE FOR ACCURATE PNEUMATIC ACTUATING
INDEXING MODULE FOR ACCURATE PNEUMATIC ACTUATING Mihai Avram, Constantin Bucsan, Victor Constantin, Costinel Florin Negrila "Politehnica" University of Bucharest 313 Spl. Independentei, Bucharest, Romania
ASM Gasoline Engine Simulation Package. dspace Automotive Simulation Models ASM NEW: Gasoline Engine Model and ASMParameterization
ASM Gasoline Engine Simulation Package dspace Automotive Simulation Models ASM NEW: Gasoline Engine Model and ASMParameterization dspace Automotive Simulation Models Gasoline Engine Simulation Package
Simulink as a Platform for Full Vehicle Simulation
Simulink as a Platform for Full Vehicle Simulation Mike Sasena (Product Manager) Lars Krause (Application Engineer) Ryan Chladny (Development) 2018 The MathWorks, Inc. 1 Fuel Economy Simulation 2 Vehicle