Simply the right choice. The latest generation of SIRIUS motor controls: fully optimized for IE3/IE4 motors. siemens.com/sirius

Transcription

1 Simply the right choice The latest generation of SIRIUS motor controls: fully optimized for IE3/IE4 motors siemens.com/sirius

2 The EU Directive for IE3 The Directive applies to New motors on the market Motors dimensioned for uninterrupted duty in the performance classes kw from 2017 from 2015 Highly energy-efficient IE3/IE4 motors All IE3/IE4 motors consume less energy in line operation and thus reduce CO2 emissions Siemens IE3/IE4 motors offer even more: IE2 IE3/IE4 They are absolutely reliable Your benefit They are extremely rugged Easy to replace thanks to constant shaft height It s worthwhile changing over: Save on power costs Environmentally friendly 2

3 SIRIUS controls IE3/IE4-compliant motors Inrush current Starting current Rated current P W consume less energy for the same power rating but are characterized by higher currents during starting This is why we have optimized our SIRIUS controls for highly energy-efficient IE3/IE4 motors For example No false tripping during start-up process Reliable switching capacity when using IE3/IE4 motors The result Reliable switching and protection of motors at all times IE1 IE2 5

4 Here s how easy it is to select the right motor starter protector for your motor Determining the right motor starter protector remains as simple as ever because we have comprehensively adapted our devices. As usual, the power rating and rated current of the motor are the crucial selection criteria. Whether for use with IE1, IE2, IE3 or IE4 motors: the overlapping setting ranges of the overload release make it easy to find the most appropriate SIRIUS motor starter protector in every case. Compared to motors of lower efficiency classes, IE3 and IE4 motors have significantly higher inrush currents. For this reason, undesired activation of the short-circuit detection of the motor starter protector may occur when switching on. Such early tripping can happen whenever the rated current of the motor is in the top range of the motor starter protector s setting scale. Thanks to the overlapping setting ranges of SIRIUS motor starter protectors, it is always possible to find a motor starter protector for which the rated current of the motor is in the lower range of the setting scale. This helps to reliably prevent premature tripping. If you protect your application with an overload relay, this relay can also be used with IE3 and IE4 motors without any further adaptation. With the new 3VA molded case circuit breakers, we offer the right solution for protecting IE3 and IE4 motors for higher power ratings too. Application with a highly energy-efficient motor (IE3 / IE4) 10 A Rated motor current 14.3 A 16 A Motor starter protector A Motor starter protector B 13 A Maximum setting value 20 A Motor starter protector A: Response limit 208 A (13 x 16 A) Factor for 14.3 A rated current: times Motor starter protector B (recommended for IE3/IE4 motors): Response limit 260 A (13 x 20 A) Factor for 14.3 A rated current: times 3

5 With SIRIUS contactors, you have the inrush under control! SIRIUS contactors have been optimized for operation with the higher starting and inrush current of IE3/IE4 motors. Up to a power rating of 45 kw (i.e. sizes S00, S0, S2 and S3), you can therefore select the standard motor contactors in the familiar way quite simply according to the motor power. In the Configuration Manual for Controls with IE3/IE4 Motors, we have included appropriate selection tables so that selection will always be as easy as possible for you. Since the inrush current is extremely high in the upper performance range in IE3/IE4 motors, we recommend that you take account of the starting current ratio of the motor as well as the power when selecting the ideal SIRIUS contactor for motors with ratings of 55 kw and higher. Up to a starting current ratio factor of 8.5, you can use your contactors in the familiar way; at a higher starting current ratio, we recommend specific versions or over-dimensioning. IE3ready Portal Have our experts explain the most important points about IE3/IE4. Among the topics on the IE3ready Portal are the following: Configuration Manual for Controls with IE3 Motors In this manual, you will find all the information on the topic of IE3ready, as well as clear configuring instructions for our SIRIUS controls that we recommend when using IE3/IE4 motors. Simulation tool for soft starters Our new simulation tool makes selection of the right soft starter really easy for you for IE3/IE4 motors as well as for your entire application. Visit us at siemens.com/ie3ready 4

6 Find out more: siemens.com/sirius Experience the SIRIUS modular system: Switching, protecting, controlling and monitoring using a coordinated, modular system. Find out more: Subject to change without prior notice Article No.: DFCP-B Dispo WS Printed in Germany Siemens AG 2015 The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. Follow us on: twitter.com/siemensindustry youtube.com/siemens Siemens AG Digital Factory Control Products P.O. Box Fuerth Germany