MGA Research Corporation

Size: px
Start display at page:

Download "MGA Research Corporation"

Transcription

1 MGA Research Corporation Real Time Simulation Testing Gerald Roesser David Nagle Thomas Hutter MGA Research Corporation 1

2 MGA Research Corporation PRESENTERS Gerald Roesser BSEE MGA Associate since 2001 Group Leader Simulation Engineer Dave Nagle BSME MGA Associate since 2006 Simulation Test Engineer Thomas Hutter BSEE MGA Associate since 2000 Simulation Engineer 2

3 MGA Research Corporation Independent test services Began in New York, 1977 ISO/IEC 17025:2005 Accredited Specialize in Safety Regulations (FMVSS, ECE, SAE, ASTM, MIL_STD, etc.), Vibration, Noise, Life Cycle, Environmental, Equipment, etc. Industries served include: Automotive, Military, Aerospace, Rail, Other Transportation, etc. 3 Burlington, Wisconsin Troy, Michigan Greer, South Carolina Akron, New York Manassas, Virginia

4 MGA Research Corporation MGA and Simulation Testing 10 years of experience with Simulation Testing 13 Multi-Axis Simulation Tables 150 plus servo-hydraulic loops for multi-axis durability testing Hundreds of Simulation Tests and Components validated per year 10 Simulation Engineers Simulation Test supplier to all major OEMS and the majority of their suppliers 4

5 WEBINAR OVERVIEW Introduction: Vehicle Durability Testing Simulation and MAST testing overview Road Load Data Acquisition and Analysis Fixture Design Drive File Development Question and Answer 5

6 INTRODUCTION 6

7 INTRODUCTION Vehicle Durability Testing Simulation Testing is used in all transportation industries Using actual road data can help predict product performance more accurately. Design Goals for Quality can be met with less development time Multi-Axis Simulation Table (MAST) will be used as an example of simulation testing 7

8 INTRODUCTION Vehicle Durability Assessment Methods Test Driving, Actual Highway Miles Highly accurate prediction Time consuming Not Practical for new vehicles Proving Ground Track Loop Accurate life predication Highly Correlated Expensive Time and labor intensive Available late in the design process 8

9 INTRODUCTION Vehicle Durability Assessment Methods Component Block Cycle Testing Good for suppliers Great tool for A to B comparison Not representative of real world Not adequate for complex systems Real-Time Road Simulation Saves development time Accurately correlate to road data and predicts product life 9

10 Real Time Simulation Testing 10

11 Simulation Testing Overview Simulation Test Flow Chart 11

12 Simulation Testing Overview Determine end use of product or vehicle Perform a study to determine what type of road surfaces the vehicle will travel on Create Testing Goals Generate a Durability Schedule based on life expectancy and 95 th percentile usage Select a Test Rig that will be able to apply the collected road inputs 12

13 Simulation Testing Overview Surface # Time (s) Repeats Test Time (h) Total Test Length Example of a Generic Durability Schedule 13

14 Road Load Data Acquisition (RLDA) Data Types Collected During RLDA Wheel Force Transducers Wheel end to body displacement Chassis, body, or component tri-axial accelerometers Wheel-end acceleration Strain Gages Vehicle Speed GPS Environmental Conditions 14

15 Road Load Data Acquisition (RLDA) Optimize Data for Test Rig Use Durability Schedule to calculate occurrences of different road surfaces Check data and prepare for analysis and reduction 15

16 Road Load Data Acquisition (RLDA) Data Normalization Collected data must be normalized so that relative comparisons can be made between different road surfaces, events, and recordings made from the test rig itself. There must be a method in place so that accurate correlations can be derived. In order to compare surfaces, correlate to the real world, or find the worst case vibration scenario, the fatigue damage must be calculated. 16

17 Road Load Data Acquisition (RLDA) Normalize data for easy comparisons Conduct Relative Fatigue Damage Analysis Create Fatigue Damage Spectrum Establish relationship between actual road miles and laboratory miles using damage figures 17

18 Road Load Data Acquisition (RLDA) 18 Damage is a unit-less number that normalizes complex data for comparison Data can be reduced to shorten time Damage comparisons are performed to ensure data still correlates Damage Analysis saves a significant amount of testing time

19 Simulation Test Rigs Upon editing and optimizing the data, it is time to select an appropriate test rig for your application. There several types of real-time simulation rigs and many ways to apply these inputs to your product. Real-Time simulation can mean applying force inputs, acceleration, displacement or even strain to your product on as many axes as collected in the field. 19

20 Simulation Test Rigs 20

21 MAST TABLE Multi-Axis Simulation Table (MAST) Made up of 6 hydraulic actuators connected to a test table Capable of moving in 6 degrees of freedom. X, Y, Z, roll, pitch, and yaw Frequency band of 2 to 50 Hz. Each actuator is instrumented with an LVDT to measure displacement. Samples are mounted to the table top 21

22 Test Fixture Design 22

23 Test Fixture Design The fixture must not a have a natural frequency in the frequency band of the test data. The fixture must also be light weight so as to not add too much moving mass to the test rig. CAD data is used to generate the fixture to ensure that the sample is mounted exactly as it would be on the vehicle and no extraneous stresses are induced. Test fixture itself can be run through a computer simulation to determine where improvements can be made. 23

24 Drive File Development 24

25 Drive File Development The drive file is the corrected data set that is generated to accurately match the desired data. A closed loop servo-hydraulic system will not immediately be able to match the desired data on command Data must be corrected for the dynamics of the system. PID tuning is effective for fixed frequency, fixed amplitude testing It is very difficult to get the command and feedback on a multi-axis system with crosstalk and complex dynamics at play to converge. Advanced software and controls in modern hydraulic controllers make the process easier. (RPC Pro) 25

26 Drive File Development Accelerometers are mounted to a test fixture or the sample just as they were when the data was collected. (Normally 3 tri-axial Accels) A random (white noise) input is commanded to each of the drive channels as the accelerometer response is recorded. This response yields a transfer function which can be used to match the acceleration response with the desired acceleration data collected from the road surfaces. Transfer functions and inverse transfer functions are generated. 26

27 Drive File Development Drive File Iterations System Inverse Example 27

28 Drive File Development Play-out of this drive file on the test rig. Calculate Error Adjust Gain on Drive File Repeat until data converges as pictured on the right 28

29 Drive File Development 29

30 Drive File Development The drive file iteration process is complete when all time history response files have been adequately matched to the desired data RMS value of each channel should be at least within 5% Maximum and minimum acceleration peaks should be within 10% Overlay the desired spectrum and response spectrum 30

31 Drive File Development 31

32 32

33 QUESTION AND ANSWER 33

34 QUESTION AND ANSWER 34 Thank you for participating! MGA Contacts: Group Leader Gerald Roesser (248) Simulation Engineer Dave Nagle (248) Simulation Engineer Thomas Hutter (586)

Virtual Durability Simulation for Chassis of Commercial vehicle

Virtual Durability Simulation for Chassis of Commercial vehicle Virtual Durability Simulation for Chassis of Commercial vehicle Mahendra A Petale M E (Mechanical Engineering) G S Moze College of Engineering Balewadi Pune -4111025 Prof. Manoj J Sature Asst. Professor

More information

Virtual Product Development (VPD) deployed on Durability

Virtual Product Development (VPD) deployed on Durability IAR FENet 2003 4-5 December 2003 Virtual Product Development (VPD) deployed on Durability Christoph Ortmann Business Development Director Agenda Introductions VPD Overview VPD Durability: The Honda ATV

More information

MODERNIZING MILITARY GROUND VEHICLE RELIABILITY TESTING

MODERNIZING MILITARY GROUND VEHICLE RELIABILITY TESTING 2018 NDIA GROUND VEHICLE SYSTEMS ENGINEERING AND TECHNOLOGY SYMPOSIUM MODELING & SIMULATION, TESTING AND VALIDATION (MSTV) TECHNICAL SESSION AUGUST 7-9, 2018 NOVI, MICHIGAN Greg Ramsey Greg Schultz, Ph.D

More information

ASTM D4169 Truck Profile Update Rationale Revision Date: September 22, 2016

ASTM D4169 Truck Profile Update Rationale Revision Date: September 22, 2016 Over the past 10 to 15 years, many truck measurement studies have been performed characterizing various over the road environment(s) and much of the truck measurement data is available in the public domain.

More information

3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS

3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS 17 3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS 3.1. INTRODUCTION The earthquake simulator is a system that consists of several components which must be designed to effectively work together. Each

More information

An Introduction to Fatigue Testing Equipment, Test Setup & Data Collection

An Introduction to Fatigue Testing Equipment, Test Setup & Data Collection An Introduction to Fatigue Testing Equipment, Test Setup & Data Collection Lisa Goodwin Servohydraulic Sales Specialist & Market Manager - Instron The difference is measurable 1 Themes.. Certainty of Measurement

More information

CHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL

CHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL STANDARDS October 2017 CHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL E S 3.29 Page 1/13 PROCÉDURES DE CONTRÔLE ET CALIBRAGE DE FATIGUE BANCS D'ESSAIS DE ROUE PRÜFUNG UND KALIBRIERUNG

More information

Steering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2

Steering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2 Steering Test Rigs The World of Steering Test Machines Steering column assemblies, are by their nature extremely safety critical, thus the ability to test them accurately and repeatedly is extremely important.

More information

A Short History of Real World Testing; What have we learnt?

A Short History of Real World Testing; What have we learnt? A Short History of Real World Testing; What have we learnt? September 25, 2013 MIRA Ltd 2013 Real World Testing My view of durability and development testing attempts to replicate the real world. Introduce

More information

HVE Vehicle Accelerometers: Validation and Sensitivity

HVE Vehicle Accelerometers: Validation and Sensitivity WP#-2015-3 HVE Vehicle Accelerometers: Validation and Sensitivity Kent W. McKee, M.E.Sc., P.Eng., Matthew Arbour, B.A.Sc., Roger Bortolin, P.Eng., and James R. Hrycay, M.A.Sc., P.Eng. HRYCAY Consulting

More information

Steering Module Test Simulator SMTS

Steering Module Test Simulator SMTS Steering Module Test Simulator Overview The Steering Module Test Simulator () from MB Dynamics is a non-hydraulic turnkey lab test system, offering accurate, reliable and repeatable in-laboratory simulations

More information

Crashworthiness Evaluation. Roof Strength Test Protocol (Version III)

Crashworthiness Evaluation. Roof Strength Test Protocol (Version III) Crashworthiness Evaluation Roof Strength Test Protocol (Version III) July 2016 CRASHWORTHINESS EVALUATION ROOF STRENGTH TEST PROTOCOL (VERSION III) Supporting documents for the Insurance Institute for

More information

ACOCAR active suspension

ACOCAR active suspension ACOCAR active suspension Bert Vandersmissen Vehicle Dynamics Expo Stuttgart, 07/05/2008 Contents Introduction Active suspension hardware Quarter car test rig Skyhook quarter car control Experimental skyhook

More information

Methodologies and Examples for Efficient Short and Long Duration Integrated Occupant-Vehicle Crash Simulation

Methodologies and Examples for Efficient Short and Long Duration Integrated Occupant-Vehicle Crash Simulation 13 th International LS-DYNA Users Conference Session: Automotive Methodologies and Examples for Efficient Short and Long Duration Integrated Occupant-Vehicle Crash Simulation R. Reichert, C.-D. Kan, D.

More information

CHAPTER 6 MECHANICAL SHOCK TESTS ON DIP-PCB ASSEMBLY

CHAPTER 6 MECHANICAL SHOCK TESTS ON DIP-PCB ASSEMBLY 135 CHAPTER 6 MECHANICAL SHOCK TESTS ON DIP-PCB ASSEMBLY 6.1 INTRODUCTION Shock is often defined as a rapid transfer of energy to a mechanical system, which results in a significant increase in the stress,

More information

test with confidence HV Series TM Test Systems Hydraulic Vibration

test with confidence HV Series TM Test Systems Hydraulic Vibration test with confidence HV Series TM Test Systems Hydraulic Vibration Experience. Technology. Value. The Difference. HV Series TM. The Difference. Our philosophy is simple. Provide a system designed for optimum

More information

A Proportional Integral Derivative (PID) Force Control System Design for a Fatigue Testing Machine For New Bicycle Fork Standards

A Proportional Integral Derivative (PID) Force Control System Design for a Fatigue Testing Machine For New Bicycle Fork Standards A Proportional Integral Derivative (PID) Force Control System Design for a Fatigue Testing Machine For New Bicycle Fork Standards Paul Sisneros, Advisor: Professor Rani F. El-Hajjar 1 Engineering Mechanics

More information

WHY CHOOSE SERVOTEST? The knowledge and experience to design and build completely unique test equipment for the most demanding applications.

WHY CHOOSE SERVOTEST? The knowledge and experience to design and build completely unique test equipment for the most demanding applications. Servotest has gained international recognition as a World leader in servohydraulic test and motion simulation. The Company offers advanced, sometimes highly customised, servohydraulic systems backed by

More information

mga research corporation

mga research corporation mga research corporation UNDERGROUND TECHNOLOGIES MAN-HOLE CONSTRUCTION VERTICAL STATIC LOAD TEST SERIES (PO# 11521) 446 executive drive troy, mi 48083 248 / 577-5001 fax 248 / 577-5025 www.mgaresearch.com

More information

Chapter 4. Vehicle Testing

Chapter 4. Vehicle Testing Chapter 4 Vehicle Testing The purpose of this chapter is to describe the field testing of the controllable dampers on a Volvo VN heavy truck. The first part of this chapter describes the test vehicle used

More information

Track Simulation and Vehicle Characterization with 7 Post Testing

Track Simulation and Vehicle Characterization with 7 Post Testing SAE TECHNICAL PAPER SERIES 2002-01-3307 Track Simulation and Vehicle Characterization with 7 Post Testing Jim Kelly Burke E. Porter Machinery Company Henri Kowalczyk Auto Research Center - Indianapolis

More information

MECHATRONICS LAB MANUAL

MECHATRONICS LAB MANUAL MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and

More information

Comparing different vibration tests proposed for li-ion batteries with vibration measurement in an electric vehicle

Comparing different vibration tests proposed for li-ion batteries with vibration measurement in an electric vehicle Comparing different vibration tests proposed for li-ion batteries with vibration measurement in an electric vehicle Presentation at EVS27 Barcelona, Spain, November 19, 2013 Gunnar Kjell 1, Jenny Frodelius

More information

ScienceDirect. Fatigue Life Prediction of Z Type Leaf Spring and New Approach to Verification Method

ScienceDirect. Fatigue Life Prediction of Z Type Leaf Spring and New Approach to Verification Method Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 101 (2015 ) 143 150 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL2015

More information

Problem Traditional ejection test manikins have limited head sensors Upper neck forces/moments Triaxial accelerometer Possibly angular (pitch) acceler

Problem Traditional ejection test manikins have limited head sensors Upper neck forces/moments Triaxial accelerometer Possibly angular (pitch) acceler Development of an Instrumentation Suite to Measure Helmet Windblast and Impact Loading 23 June 24 John Plaga Human Effectiveness Directorate Air Force Research Laboratory Doug Coppess Glenn Thomas Greg

More information

2014 HBM ncode Products User Group Meeting

2014 HBM ncode Products User Group Meeting Sine Sweep and PSD Vibration Fatigue Life Prediction Ricky Lin Engineering and R&D Bendix Commercial Vehicle Systems G Acceleration [G²/Hz] 1.20E+00 1.00E+00 8.00E-01 6.00E-01 4.00E-01 2.00E-01 0.00E+00-2.00E-01

More information

Spin Rig for NSMS Probe Development and Strain Gage Correlation

Spin Rig for NSMS Probe Development and Strain Gage Correlation Spin Rig for NSMS Probe Development and Strain Gage Correlation Terry Hayes, Bryan Hayes, Tom Tibbals, Steve Arnold Aerospace Testing Alliance (ATA) Arnold Air Force Base, TN Joel Davenport Univ. Of Tennessee

More information

Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE

Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE 4 Aerospace For any aircraft, helicopter, space vehicle or ballistic device, reliability is the number one priority. By using our vibration test

More information

Modification of IPG Driver for Road Robustness Applications

Modification of IPG Driver for Road Robustness Applications Modification of IPG Driver for Road Robustness Applications Alexander Shawyer (BEng, MSc) Alex Bean (BEng, CEng. IMechE) SCS Analysis & Virtual Tools, Braking Development Jaguar Land Rover Introduction

More information

Vibration Measurement and Noise Control in Planetary Gear Train

Vibration Measurement and Noise Control in Planetary Gear Train Vibration Measurement and Noise Control in Planetary Gear Train A.R.Mokate 1, R.R.Navthar 2 P.G. Student, Department of Mechanical Engineering, PDVVP COE, A. Nagar, Maharashtra, India 1 Assistance Professor,

More information

Collecting In-theatre Vehicle Blast Data using Stand-alone On-board Data Acquisition Technology

Collecting In-theatre Vehicle Blast Data using Stand-alone On-board Data Acquisition Technology Collecting In-theatre Vehicle Blast Data using Stand-alone On-board Data Acquisition Technology Allen Vanguard s Blackbird: A Vehicle Mounted Blast Data Acquisition System ALLENVANGUARD 2010 Authored by:

More information

Development of a Dual Mode Vibration Isolator for a Laser Communication Terminal

Development of a Dual Mode Vibration Isolator for a Laser Communication Terminal Development of a Dual Mode D-Strut@ Vibration Isolator for a Laser Communication Terminal Dale T. Ruebsamen, James Boyd*, Joe Vecera. and Roger Nagel Abstract This paper provides a review of the development

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MGA RESEARCH CORPORATION 4 446 Executive Drive Troy, MI 48083 Helen Kaleto Phone: 248 577 5001 Email: helen.kaleto@mgaresearch.com Website: www.mgaresearch.com

More information

Case study on Carbon Fiber spring suspension for FORD ENDEVOUR THUNDER+

Case study on Carbon Fiber spring suspension for FORD ENDEVOUR THUNDER+ Case study on Fiber spring suspension for FORD ENDEVOUR THUNDER+ Krishna Balamurali (M.S Automotive Engineering) Principal Engineer, NV Dynamnics Abstract: Most of the SUV s (sports utility vehicles) available

More information

Procedia Engineering 00 (2009) Mountain bike wheel endurance testing and modeling. Robin C. Redfield a,*, Cory Sutela b

Procedia Engineering 00 (2009) Mountain bike wheel endurance testing and modeling. Robin C. Redfield a,*, Cory Sutela b Procedia Engineering (29) Procedia Engineering www.elsevier.com/locate/procedia 9 th Conference of the International Sports Engineering Association (ISEA) Mountain bike wheel endurance testing and modeling

More information

*Shown with optional high pressure blowers

*Shown with optional high pressure blowers *Shown with optional high pressure blowers SUPERFLOW CYCLEDYN WITH CYCLEDYN YOU CAN The SuperFlow CycleDyn is a chassis dynamometer system, which means that you can select the appropriate Run tests with

More information

Application of Steering Robot in the Test of Vehicle Dynamic Characteristics

Application of Steering Robot in the Test of Vehicle Dynamic Characteristics 3rd International Conference on Mechatronics, Robotics and Automation (ICMRA 2) Application of Steering Robot in the Test of Vehicle Dynamic Characteristics Runqing Guo,a *, Zhaojuan Jiang 2,b and Lin

More information

Openness Design modularity Outstanding Quality Fine positioning INGENIA MOTION CONTROL Motor control Engineered Solutions Complete Integration

Openness Design modularity Outstanding Quality Fine positioning INGENIA MOTION CONTROL Motor control Engineered Solutions Complete Integration Openness Design modularity Outstanding Quality Fine positioning INGENIA MOTION CONTROL Motor control Engineered Solutions Complete Integration Freedom to create Complete motion control Your partner in

More information

LOAD CELL USE IN AEROSPACE GROUND AND FLIGHT TEST APPLICATIONS A Honeywell White Paper

LOAD CELL USE IN AEROSPACE GROUND AND FLIGHT TEST APPLICATIONS A Honeywell White Paper LOAD CELL USE IN AEROSPACE GROUND AND FLIGHT TEST APPLICATIONS A Honeywell White Paper Load Cell Use in Aerospace Ground & Flight Test Applications White Paper sensing.honeywell.com 2 Abstract A load cell

More information

HS CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM

HS CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM HS28.610 CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM Meets the essential requirements of ASTM-5311/3999 Introduction The system is a highly advanced combination of hydraulic and pneumatic technology where σ1

More information

Dynamic Behavior Analysis of Hydraulic Power Steering Systems

Dynamic Behavior Analysis of Hydraulic Power Steering Systems Dynamic Behavior Analysis of Hydraulic Power Steering Systems Y. TOKUMOTO * *Research & Development Center, Control Devices Development Department Research regarding dynamic modeling of hydraulic power

More information

AUTONOMOUS VEHICLES & HD MAP CREATION TEACHING A MACHINE HOW TO DRIVE ITSELF

AUTONOMOUS VEHICLES & HD MAP CREATION TEACHING A MACHINE HOW TO DRIVE ITSELF AUTONOMOUS VEHICLES & HD MAP CREATION TEACHING A MACHINE HOW TO DRIVE ITSELF CHRIS THIBODEAU SENIOR VICE PRESIDENT AUTONOMOUS DRIVING Ushr Company History Industry leading & 1 st HD map of N.A. Highways

More information

2 Poster Motorcycle Ride Simulator

2 Poster Motorcycle Ride Simulator 2 Poster Motorcycle Ride Simulator The World of Ride Simulators The 2 Poster Motorcycle Road Simulator System is designed to reproduce responses experienced under normal driving conditions, to test motorcycle

More information

MYLES GROUP THE. Products and Services for Industry and Military. Since 1957

MYLES GROUP THE. Products and Services for Industry and Military. Since 1957 THE MYLES GROUP Products and Services for Industry and Military Since 1957 An Introduction to THE MYLES GROUP Control Power Company Design/Manufacture Servo Drives Functional and Validation Testing Machines

More information

PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch

PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch Herb Schueneman President & CEO Presenter Mike Brown Laboratory Manager Presenter June 2015 Overview

More information

Tyre Endurance/Low Pressure Test

Tyre Endurance/Low Pressure Test Tyre Endurance/Low Pressure Test Test versions implemented by US DOT in 1960s (FMVSS 109) for use on passenger car tyres. Updated in June 2003 (FMVSS 139) to more closely represent real world worst-case

More information

MORSE: MOdel-based Real-time Systems Engineering. Reducing physical testing in the calibration of diagnostic and driveabilty features

MORSE: MOdel-based Real-time Systems Engineering. Reducing physical testing in the calibration of diagnostic and driveabilty features MORSE: MOdel-based Real-time Systems Engineering Reducing physical testing in the calibration of diagnostic and driveabilty features Mike Dempsey Claytex Future Powertrain Conference 2017 MORSE project

More information

Using ABAQUS in tire development process

Using ABAQUS in tire development process Using ABAQUS in tire development process Jani K. Ojala Nokian Tyres plc., R&D/Tire Construction Abstract: Development of a new product is relatively challenging task, especially in tire business area.

More information

DEFINITION AND SELECTION OF THE PROPER FLEX COUPLING FOR AN EXHAUST SYSTEM Mauricio MONTEAGUDO

DEFINITION AND SELECTION OF THE PROPER FLEX COUPLING FOR AN EXHAUST SYSTEM Mauricio MONTEAGUDO DEFINITION AND SELECTION OF THE PROPER FLEX COUPLING FOR AN EXHAUST SYSTEM Mauricio MONTEAGUDO 4th European HTC- Versailles, France October 27-29, 2010 Content 1. Abstract 2. Introducing Faurecia 3. Problem

More information

ncode User Group Meeting October 5 6,2016

ncode User Group Meeting October 5 6,2016 ncode User Group Meeting October 5 6,2016 Virtual Strain Gauge Correlation of Structural Components Presented by: Marc Bastarache October 6 th, 2016 Tower International Intro to Tower International Products

More information

Precision Motion Control

Precision Motion Control Precision Motion Control Military Rotary Actuator MRA 60 Product Overview This actuator is used to control the fins of a Missile. The affordable actuator robust design and use of special material in gearing,

More information

Vibration Test Systems. ibratio

Vibration Test Systems. ibratio ibratio Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages, full pallet

More information

Multi-axial fatigue life assessment of high speed car body based on PDMR method

Multi-axial fatigue life assessment of high speed car body based on PDMR method MATEC Web of Conferences 165, 17006 (018) FATIGUE 018 https://doi.org/10.1051/matecconf/01816517006 Multi-axial fatigue life assessment of high speed car body based on PDMR method Chaotao Liu 1,*, Pingbo

More information

Vibration Fundamentals Training System Hands-On Turnkey System for Teaching Vibration Fundamentals

Vibration Fundamentals Training System Hands-On Turnkey System for Teaching Vibration Fundamentals Vibration Fundamentals Training System Hands-On Turnkey System for Teaching Vibration Fundamentals www.haopute.com email:info@haopute.com phone:02884625157 mobile:18982185717 An Ideal Tool for Optimizing

More information

JRS Dynamic Rollover Test Toyota Prius

JRS Dynamic Rollover Test Toyota Prius Page 1 of 62 JRS Dynamic Rollover Test 2010 Toyota Prius Sponsored By: Automotive Safety Research Institute Charlottesville, VA. Vehicle Donated by: State Farm Insurance Company Chicago, IL. Introduction

More information

Precision Load Cells. The World of Precision Made Force Transducers. A world of experience TEST AND MOTION SIMULATION

Precision Load Cells. The World of Precision Made Force Transducers. A world of experience TEST AND MOTION SIMULATION Precision Load Cells The World of Precision Made Force Transducers With many years of experience in the Precision Load Cells field, Servotest has been working to develop testing equipment that exceeds

More information

FMVSS 126 Electronic Stability Test and CarSim

FMVSS 126 Electronic Stability Test and CarSim Mechanical Simulation 912 North Main, Suite 210, Ann Arbor MI, 48104, USA Phone: 734 668-2930 Fax: 734 668-2877 Email: info@carsim.com Technical Memo www.carsim.com FMVSS 126 Electronic Stability Test

More information

Quasi-Static Finite Element Analysis (FEA) of an Automobile Seat Latch Using LS-DYNA

Quasi-Static Finite Element Analysis (FEA) of an Automobile Seat Latch Using LS-DYNA 7 th International LS-DYNA Users Conference Simulation Technology (2) Quasi-Static Finite Element Analysis (FEA) of an Automobile Seat Latch Using LS-DYNA Song Chen, Yuehui Zhu Fisher Dynamics Engineering

More information

SHOCK ABSORBER/DAMPER TESTING MACHINE

SHOCK ABSORBER/DAMPER TESTING MACHINE SHOCK ABSORBER/DAMPER TESTING MACHINE Dampening force of a shock absorber is directly proportional to velocity and this parameter needs to be precisely controlled. A small variation of 1mm in a stroke

More information

Finite Element and Experimental Validation of Stiffness Analysis of Precision Feedback Spring and Flexure Tube of Jet Pipe Electrohydraulic Servovalve

Finite Element and Experimental Validation of Stiffness Analysis of Precision Feedback Spring and Flexure Tube of Jet Pipe Electrohydraulic Servovalve Finite Element and Experimental Validation of Stiffness Analysis of Precision Feedback Spring and Flexure Tube of Jet Pipe Electrohydraulic Servovalve M. Singaperumal*, Somashekhar. S. Hiremath* R. Krishna

More information

StepSERVO Tuning Guide

StepSERVO Tuning Guide StepSERVO Tuning Guide www.applied-motion.com Goal: Using the Step-Servo Quick Tuner software, this guide will walk the user through the tuning parameters to assist in achieving the optimal motor response

More information

Vibration Test Systems

Vibration Test Systems Vibration Test Systems Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages,

More information

ROLLOVER CRASHWORTHINESS OF A RURAL TRANSPORT VEHICLE USING MADYMO

ROLLOVER CRASHWORTHINESS OF A RURAL TRANSPORT VEHICLE USING MADYMO ROLLOVER CRASHWORTHINESS OF A RURAL TRANSPORT VEHICLE USING MADYMO S. Mukherjee, A. Chawla, A. Nayak, D. Mohan Indian Institute of Technology, New Delhi INDIA ABSTRACT In this work a full vehicle model

More information

SWIFT Evo SPINNING WHEEL INTEGRATED FORCE TRANSDUCER

SWIFT Evo SPINNING WHEEL INTEGRATED FORCE TRANSDUCER SWIFT Evo SPINNING WHEEL INTEGRATED FORCE TRANSDUCER www.pcb.com/swift SWIFT@PCB.com +1-716-684-0001 MTS SYSTEMS CORPORATION SWIFT HISTORY Through the acquisition of PCB Piezotronics, Inc. in 2016, MTS

More information

NVH. NVH: from the Vehicle to the Lab. Damián González Centro Tecnológico de Automoción de Galicia

NVH. NVH: from the Vehicle to the Lab. Damián González Centro Tecnológico de Automoción de Galicia NVH From the Vehicle to the Lab Damián González Centro Tecnológico de Automoción de Galicia www.ctag.com 1 Contents 1. Problem Definition: NVH in Vehicle Components 2. Proposed Solution: From the Vehicle

More information

Welcome to Vibrationdata

Welcome to Vibrationdata Welcome to Vibrationdata Acoustics Shock Vibration Signal Processing August 24 Newsletter Ahoy! Feature Articles Noise, Vibration, and Harshness (NVH) are important areas in automotive engineering. The

More information

Analysis. Techniques for. Racecar Data. Acquisition, Second Edition. By Jorge Segers INTERNATIONAL, Warrendale, Pennsylvania, USA

Analysis. Techniques for. Racecar Data. Acquisition, Second Edition. By Jorge Segers INTERNATIONAL, Warrendale, Pennsylvania, USA Analysis Techniques for Racecar Data Acquisition, Second Edition By Jorge Segers INTERNATIONAL, Warrendale, Pennsylvania, USA Preface to the Second Edition xiii Preface to the First Edition xv Acknowledgments

More information

Rotary Actuators. The World of Rotary Actuators. A world of experience TEST AND MOTION SIMULATION

Rotary Actuators. The World of Rotary Actuators. A world of experience TEST AND MOTION SIMULATION Rotary Actuators The World of Rotary Actuators Servotest produces two types of Rotary Actuators; Dual Vane, and Torque rotary actuators. By virtue of their design, both types of actuators, when used continuously,

More information

Screw Driven automation tables

Screw Driven automation tables automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics

More information

ATLAS Principle to Product

ATLAS Principle to Product ATLAS Principle to Product SUPERGEN 26th May 2016 Wind and tidal energy control experts SgurrControl Experts in wind and tidal energy control Engineering organisation providing control solutions to wind

More information

COMPUTATIONAL MODELING OF HEAVY DUTY TRUCK DRIVESHAFT

COMPUTATIONAL MODELING OF HEAVY DUTY TRUCK DRIVESHAFT COMPUTATIONAL MODELING OF HEAVY DUTY TRUCK DRIVESHAFT Michal Janoušek 1 Summary: The driveline of heavy duty vehicle is an important source of NVH. Prediction of NVH parameters of driveline in construction

More information

Motor Technologies Motor Sizing 101

Motor Technologies Motor Sizing 101 Motor Technologies Motor Sizing 101 TN-2003 REV 161221 PURPOSE This technical note addresses basic motor sizing with simple calculations that can be done to generally size any motor application. It will

More information

VALMONT MITIGATOR TR1

VALMONT MITIGATOR TR1 VALMONT MITIGATOR TR1 Research Verification of the Valmont TR1 Damper Performance MITIGATOR TR1 VIBRATION DAMPER The Valmont TR1 damper has been specifically designed using vibration theory and innovative

More information

CAPT JT Elder Commanding Officer NSWC Crane

CAPT JT Elder Commanding Officer NSWC Crane KeyMod vs. M-LOK Modular Rail System Comparison Abstract #19427 Presented By: Caleb McGee Date: 4 May 2017 CAPT JT Elder Commanding Officer NSWC Crane Dr. Brett Seidle, SES Technical Director NSWC Crane

More information

AXLE HOUSING AND UNITIZE BEARING PACK SET MODAL CHARACTERISATION

AXLE HOUSING AND UNITIZE BEARING PACK SET MODAL CHARACTERISATION F2004F461 AXLE HOUSING AND UNITIZE BEARING PACK SET MODAL CHARACTERISATION 1 Badiola, Virginia*, 2 Pintor, Jesús María, 3 Gainza, Gorka 1 Dana Equipamientos S.A., España, 2 Universidad Pública de Navarra,

More information

DESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS

DESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS DESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS GAJENDRA G 1, PRAKASHA A M 2, DR NOOR AHMED R 3, DR.K.S.BADRINARAYAN 4 1PG Scholar, Mechanical department, M S Engineering College,

More information

2015 The MathWorks, Inc. 1

2015 The MathWorks, Inc. 1 2015 The MathWorks, Inc. 1 [Subtrack 2] Vehicle Dynamics Blockset 소개 김종헌부장 2015 The MathWorks, Inc. 2 Agenda What is Vehicle Dynamics Blockset? How can I use it? 3 Agenda What is Vehicle Dynamics Blockset?

More information

Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results

Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2012 Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured

More information

Active Systems Design: Hardware-In-the-Loop Simulation

Active Systems Design: Hardware-In-the-Loop Simulation Active Systems Design: Hardware-In-the-Loop Simulation Eng. Aldo Sorniotti Eng. Gianfrancesco Maria Repici Departments of Mechanics and Aerospace Politecnico di Torino C.so Duca degli Abruzzi - 10129 Torino

More information

MODELING SUSPENSION DAMPER MODULES USING LS-DYNA

MODELING SUSPENSION DAMPER MODULES USING LS-DYNA MODELING SUSPENSION DAMPER MODULES USING LS-DYNA Jason J. Tao Delphi Automotive Systems Energy & Chassis Systems Division 435 Cincinnati Street Dayton, OH 4548 Telephone: (937) 455-6298 E-mail: Jason.J.Tao@Delphiauto.com

More information

Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA)

Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA) Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA) G. S. Choi and H. K. Min Kia Motors Technical Center 3-61 INTRODUCTION The reason manufacturers invest their time

More information

Transmitted by the expert from Germany

Transmitted by the expert from Germany Overview Transmitted by the expert from Germany Informal document No. GRRF-62-17 (62nd GRRF, 25-28 September 2007, agenda item 9(f)) TPMS Motivations Principles of tire pressure monitoring systems (TPMS)

More information

Overview of Current Vehicle Dynamics

Overview of Current Vehicle Dynamics Overview of Current Vehicle Dynamics Thomas D. Gillespie, Ph.D. Mechanical Simulation Corp. 1 Evolution of the Automobile REMOTE SENSING, COMMUNICATION, DRIVING INTERVENTION Collision avoidance systems,

More information

Sensors for Road Load Measurements Accelerometers, Pressure Sensors, Force Sensors, Strain Sensors, Load Cells, and Signal Conditioners

Sensors for Road Load Measurements Accelerometers, Pressure Sensors, Force Sensors, Strain Sensors, Load Cells, and Signal Conditioners WWW.PCB.COM Sensors for Road Load Measurements Accelerometers, Pressure Sensors, Force Sensors, Strain Sensors, Load Cells, and Signal Conditioners Automotive Sensors Division Toll-Free in USA 888-684-0014

More information

TEST METHODS CONCERNING TRANSPORT EQUIPMENT

TEST METHODS CONCERNING TRANSPORT EQUIPMENT PART IV TEST METHODS CONCERNING TRANSPORT EQUIPMENT - 403 - CONTENTS OF PART IV Section Page 40. INTRODUCTION TO PART IV... 407 40.1 PURPOSE... 407 40.2 SCOPE... 407 41. DYNAMIC LONGITUDINAL IMPACT TEST

More information

An evaluation of formation charge power conversion technologies and their effect on battery quality and performance

An evaluation of formation charge power conversion technologies and their effect on battery quality and performance An evaluation of formation charge power conversion technologies and their effect on battery quality and performance Slide 1 Overview General Introduction Introduction to charge power conversion technologies

More information

QuickStick Repeatability Analysis

QuickStick Repeatability Analysis QuickStick Repeatability Analysis Purpose This application note presents the variables that can affect the repeatability of positioning using a QuickStick system. Introduction Repeatability and accuracy

More information

Measuring Diesel Fuel Consumption in a Laboratory Setting

Measuring Diesel Fuel Consumption in a Laboratory Setting Measuring Diesel Fuel Consumption in a Laboratory Setting Joseph P. Wichlinski, Alexander Taylor, and Gregory Shaver School of Mechanical Engineering, Purdue University Several improvements in diesel engines

More information

Development of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics.

Development of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics. Development of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics. http://dx.doi.org/10.3991/ijoe.v11i6.5033 Matthew Bastin* and R Peter

More information

2.0 TEST PROCEDURES AND RESULTS Vibration Test TEST EQUIPMENT AND INSTRUMENTATION QUALITY ASSURANCE PROGRAM 7 ATTACHMENTS

2.0 TEST PROCEDURES AND RESULTS Vibration Test TEST EQUIPMENT AND INSTRUMENTATION QUALITY ASSURANCE PROGRAM 7 ATTACHMENTS Page No. 2 TABLE OF CONTENTS Page No. 1.0 INTRODUCTION 3 1.1 Scope 3 1.2 References 3 1.3 Test Specimen Description 3 1.4 Summary 3 2.0 TEST PROCEDURES AND RESULTS 4 2.1 Vibration Test 4 3.0 TEST EQUIPMENT

More information

Connecting Different Sensors to your VR Controller. Todays Presenter: Aaron Offringa

Connecting Different Sensors to your VR Controller. Todays Presenter: Aaron Offringa Connecting Different Sensors to your VR Controller. Todays Presenter: Aaron Offringa Meet VR Connecting Different Sensors Each sensor/ transducer has its own purpose. The following are examples of different

More information

Design and Analysis of a Lightweight Crankshaft for a Racing Motorcycle Engine. Naji Zuhdi, PETRONAS Phil Carden, Ricardo UK David Bell, Ricardo UK

Design and Analysis of a Lightweight Crankshaft for a Racing Motorcycle Engine. Naji Zuhdi, PETRONAS Phil Carden, Ricardo UK David Bell, Ricardo UK Design and Analysis of a Lightweight Crankshaft for a Racing Motorcycle Engine Naji Zuhdi, PETRONAS Phil Carden, Ricardo UK David Bell, Ricardo UK Contents Introduction Design overview Engine balance Main

More information

EFFECTIVE SOLUTIONS FOR SHOCK AND VIBRATION CONTROL

EFFECTIVE SOLUTIONS FOR SHOCK AND VIBRATION CONTROL EFFECTIVE SOLUTIONS FOR SHOCK AND VIBRATION CONTROL Part 1 Alan Klembczyk TAYLOR DEVICES, INC. North Tonawanda, NY Part 2 Herb LeKuch Shocktech / 901D Monsey, NY SAVIAC Tutorial 2009 Part 1 OUTLINE Introduction

More information

Variable Valve Drive From the Concept to Series Approval

Variable Valve Drive From the Concept to Series Approval Variable Valve Drive From the Concept to Series Approval New vehicles are subject to ever more stringent limits in consumption cycles and emissions. At the same time, requirements in terms of engine performance,

More information

An Automated System for the Acoustical and Aerodynamic Characterization of Small Air Moving Devices

An Automated System for the Acoustical and Aerodynamic Characterization of Small Air Moving Devices Minneapolis, Minnesota NOISE-CON 2005 2005 October 17-19 An Automated System for the Acoustical and Aerodynamic Characterization of Small Air Moving Devices Jeff G. Schmitt David A. Nelson John Phillips

More information

SAFETY COMPLIANCE TESTING FOR FMVSS 202a Head Restraints

SAFETY COMPLIANCE TESTING FOR FMVSS 202a Head Restraints FINAL REPORT NUMBER 202a-MGA-10-003 SAFETY COMPLIANCE TESTING FOR FMVSS 202a FORD MOTOR COMPANY 2010 Lincoln MKT MPV NHTSA No. CA0213 MGA RESEARCH CORPORATION 446 Executive Drive Troy, Michigan 48083 Test

More information

The HBM edrive solution: The next generation power analyser / DAQ for electric and hybrid test rigs

The HBM edrive solution: The next generation power analyser / DAQ for electric and hybrid test rigs The HBM edrive solution: The next generation power analyser / DAQ for electric and hybrid test rigs edrive testing presentation topics Current motor testing limitations State of the art technical requirements

More information

95/115D 65/ HSX20. Shock Test Systems

95/115D 65/ HSX20. Shock Test Systems Mechanical shock tests accurately measure the fragility of products and evaluate how they respond to particular shock inputs. Shock test data is key information to ensure any product is capable of withstanding

More information

Reduction of Self Induced Vibration in Rotary Stirling Cycle Coolers

Reduction of Self Induced Vibration in Rotary Stirling Cycle Coolers Reduction of Self Induced Vibration in Rotary Stirling Cycle Coolers U. Bin-Nun FLIR Systems Inc. Boston, MA 01862 ABSTRACT Cryocooler self induced vibration is a major consideration in the design of IR

More information

Testing and validation of powder metal gears in a 6 speed manual transmission

Testing and validation of powder metal gears in a 6 speed manual transmission Testing and validation of powder metal gears in a 6 speed manual transmission Anders Flodin anders.flodin@hoganas.com Höganäs AB, Sweden Abstract A 6 speed manual transmission was redesigned and optimized

More information