MULTI-AIR PLUS A975 SANDING DISCS

Transcription

1 MULTIAIR BACKUP PADS PERFORMANCE OF The innovative MultiAir backup pad design draws dust into a collecting chamber allowing optimal airflow and powerful dust extraction. High performance, high productivity and a clean surface and working environment are the outcome of this innovative design. MultiAir backup pad mm is available in 3 densities (25mm in medium and soft): FAST CUT: REDUCE FINISHING COSTS HARD Heavy duty sanding, best for flat surfaces or dimensions MEDIUM Scuffing, shaping, sanding and finishing, for use on filler, primer, paint, clear coat, wood, plaster, composites, metal SOFT Final sanding, to obtain the best finishes 25mm 25mm mm mm Medium Hard Packed in individual boxes with Festo Adapter, 2 x M8 & 5/6 bolts and 3 fibre ring spacers. MULTIAIR PROCESS INTERFACE PADS Adapter for Rupes * MORE CONSISTENT FINISHING DISCS ABRASIVE Ceramic SG alumina CUTSHEETS BENEFITS Adapted for all work conditions BACKING The fibrereinforced, latex saturated paper (CWeight for P, BWeight for finer grits) provides a % 60% improvement in tear strength while maintaining flexibility. FOR THE MOST DEMANDING SANDING APPLICATIONS ANTILOADING P0 & 0 ø25mm and ømm 70x25mm, 70x98mm, 70x4mm and 5x230mm cutsheets DA Grinding on Acrylic Panels: mm Disc, 00 RPM Grit Size DA Grinding on Acrylic Panels: mm Disc, Stock Removal at 2 min 00 RPM Grit Size, Rz at 2 min Stock Removal at 2 min, Rz at 2 min The new achieves a more consistent, uniform scratch pattern allowing us to maintain an acceptable surface finish even at the higher cut rates. MULTIAIR PLUS OPTIMAL PERFORMANCE & EFFICIENCY *Madetoorder FEATURES Very high cut rate. Lasts up to 2 times longer than Less downtime, better cost/ performance ratio MULTIAIR PLUS SANDING DISCS Rz (microinch) Rz (microinch) The waterbased stearate, NoFil coating provides maximum load resistance, extending life even more. Operators do more with each disc in less time and downtime changing spent discs is minimized. APPLICATIONS Grinding test on Acrylic Panels: mm Disc, 00 RPM Grit Size Grinding test on Acrylic Panels: mm Disc, 00 RPM Grit Size The combination of Norton SG and premium heattreated grains provides the most aggressive yet coolest cut, with maximum resistance to loading. This results in higher cut rates and extended life as much as 2: vs. DENSITY QUALITY THAT PAYS 0 in discs in cut sheets P3 0 in Touch discs Unique fibrereinforced latex paper Waterbased NoFil Nopigment More consistent uniform scratch pattern Flexible & tear resistant Resists clogging during use. No risk of colour transfer DA Grinding on 2K painted panels: mm Disc, 00 RPM PERFORMANCE IS SIGNIFICANTLY HIGHER THAN + 39% increase in P0 + 00% increase in 0 SaintGobain Abrasifs Rue de l Ambassadeur B.P.8 F78702 Conflans Cedex France Tel: +33 (0) Fax: +33 (0) Norton, MultiAir and NoFil are registered trademarks and SG is a trademark of SaintGobain Abrasives. Form # 2663

2 MULTIAIR PLUS DISCS 25 x P * * P P touch Designed with the user in mind, MultiAir sanding blocks are ergonomic, resistant and built for performance. The special rubber grip provides good handling. All the MultiAir blocks are provided with a regulating valve to regulate suction power and optimize air/dust flow. *Madetoorder MATERIALS Automotive Aftermarket (sanding on filler, primer, paint and clearcoat; suited for ceramic coating, composite parts) Filler, primer, paint and lacquers Automotive Industry (body assembly, composites, bumpers) Composites MULTIAIR PLUS DISCS Diameter: 25mm and mm Abrasive: Norton SG Ceramic blended with premium, heat treated aluminium oxide Grit Range:, P, P,, P2,,, P3,, P0, 0 Backing: Blue fibrereinforced latex paper, (P: Cweight / P0: Bweight) Antiloading properties: Special feature: Water based NoFil agent, resists clogging during use Colourless bond system 5 x 230mm The 4 metre flexible tube is provided with a universal conical adaptor that can be connected to any vacuum system. This universal adaptor can be removed to be connected directly to an adapted vacuum system. 25 / 30mm x 4m SANDING BLOCK STARTER KIT MULTIAIR PLUS CUT SHEETS Metal (aluminium, steel etc.) 70 x 4mm MultiAir Plus Touch discs are made with a flexible foam layer on highquality Norton abrasive paper, with high performance and exceptional long life, directly attached to the abrasive paper. Wood (hard and soft) 70 x 98mm ATTACHABLE HOSE Ceramic coatings Epoxy coating 70 x 25mm MULTIAIR PLUS SOFT TOUCH The foam layer absorbs easily differences in surface contours, maintaining an excellent cutting action for a high level finish. MARKETS & APPLICATIONS Wind Power Industry (blade finishing and rework) P0 0 scratch pattern, allowing to maintain the desired surface finish while providing higher cut rates. MultiAir Plus extends the MultiAir range to answer the most critical industrial demands. Aircraft Industry (body assembly and repair) Velcro 0 P0 Using a combination of Ceramic SG abrasive and premium heattreated aluminium oxide, provides the most aggressive, coolest cut to date. With good wear resistance, it gives the longest possible life, up to 2 times longer than conventional designs. MultiAir Plus achieves a more consistent and uniform Marine and Composites (mould sanding, gel coat repair) P2 Wood Industry (furniture, kitchens) x 8 P Made with premium NoFil SG Ceramic Grain, Norton MultiAir Plus is designed for the most demanding sanding applications. MULTIAIR SANDING BLOCKS The special NoFil coating of MultiAir Plus prevents buildup of dust and avoids premature clogging. In very fine grits, it can be used for final dry sanding operations before spraying without the risk of runs. Selfgripping fixing for easy application and removal from sanding block. Starter Kit MULTIAIR SANDING BLOCK KIT 70 x 25mm 70 x 98mm 70 x 4mm 5 x 230mm P P P * P *Madetoorder Manual sanding block with a set of 3 selfgripping interchangeable plates (plane, concave and convex) to be used with MultiAir discs, also Touch version. Kit contains air valve for better aspiration. Fits MultiAir mm discs

3 MULTIAIR PLUS DISCS 25 x P * * P P touch Designed with the user in mind, MultiAir sanding blocks are ergonomic, resistant and built for performance. The special rubber grip provides good handling. All the MultiAir blocks are provided with a regulating valve to regulate suction power and optimize air/dust flow. *Madetoorder MATERIALS Automotive Aftermarket (sanding on filler, primer, paint and clearcoat; suited for ceramic coating, composite parts) Filler, primer, paint and lacquers Automotive Industry (body assembly, composites, bumpers) Composites MULTIAIR PLUS DISCS Diameter: 25mm and mm Abrasive: Norton SG Ceramic blended with premium, heat treated aluminium oxide Grit Range:, P, P,, P2,,, P3,, P0, 0 Backing: Blue fibrereinforced latex paper, (P: Cweight / P0: Bweight) Antiloading properties: Special feature: Water based NoFil agent, resists clogging during use Colourless bond system 5 x 230mm The 4 metre flexible tube is provided with a universal conical adaptor that can be connected to any vacuum system. This universal adaptor can be removed to be connected directly to an adapted vacuum system. 25 / 30mm x 4m SANDING BLOCK STARTER KIT MULTIAIR PLUS CUT SHEETS Metal (aluminium, steel etc.) 70 x 4mm MultiAir Plus Touch discs are made with a flexible foam layer on highquality Norton abrasive paper, with high performance and exceptional long life, directly attached to the abrasive paper. Wood (hard and soft) 70 x 98mm ATTACHABLE HOSE Ceramic coatings Epoxy coating 70 x 25mm MULTIAIR PLUS SOFT TOUCH The foam layer absorbs easily differences in surface contours, maintaining an excellent cutting action for a high level finish. MARKETS & APPLICATIONS Wind Power Industry (blade finishing and rework) P0 0 scratch pattern, allowing to maintain the desired surface finish while providing higher cut rates. MultiAir Plus extends the MultiAir range to answer the most critical industrial demands. Aircraft Industry (body assembly and repair) Velcro 0 P0 Using a combination of Ceramic SG abrasive and premium heattreated aluminium oxide, provides the most aggressive, coolest cut to date. With good wear resistance, it gives the longest possible life, up to 2 times longer than conventional designs. MultiAir Plus achieves a more consistent and uniform Marine and Composites (mould sanding, gel coat repair) P2 Wood Industry (furniture, kitchens) x 8 P Made with premium NoFil SG Ceramic Grain, Norton MultiAir Plus is designed for the most demanding sanding applications. MULTIAIR SANDING BLOCKS The special NoFil coating of MultiAir Plus prevents buildup of dust and avoids premature clogging. In very fine grits, it can be used for final dry sanding operations before spraying without the risk of runs. Selfgripping fixing for easy application and removal from sanding block. Starter Kit MULTIAIR SANDING BLOCK KIT 70 x 25mm 70 x 98mm 70 x 4mm 5 x 230mm P P P * P *Madetoorder Manual sanding block with a set of 3 selfgripping interchangeable plates (plane, concave and convex) to be used with MultiAir discs, also Touch version. Kit contains air valve for better aspiration. Fits MultiAir mm discs

4 MULTIAIR BACKUP PADS PERFORMANCE OF The innovative MultiAir backup pad design draws dust into a collecting chamber allowing optimal airflow and powerful dust extraction. High performance, high productivity and a clean surface and working environment are the outcome of this innovative design. MultiAir backup pad mm is available in 3 densities (25mm in medium and soft): FAST CUT: REDUCE FINISHING COSTS HARD Heavy duty sanding, best for flat surfaces or dimensions MEDIUM Scuffing, shaping, sanding and finishing, for use on filler, primer, paint, clear coat, wood, plaster, composites, metal SOFT Final sanding, to obtain the best finishes 25mm 25mm mm mm Medium Hard Packed in individual boxes with Festo Adapter, 2 x M8 & 5/6 bolts and 3 fibre ring spacers. MULTIAIR PROCESS INTERFACE PADS Adapter for Rupes * MORE CONSISTENT FINISHING DISCS ABRASIVE Ceramic SG alumina CUTSHEETS BENEFITS Adapted for all work conditions BACKING The fibrereinforced, latex saturated paper (CWeight for P, BWeight for finer grits) provides a % 60% improvement in tear strength while maintaining flexibility. FOR THE MOST DEMANDING SANDING APPLICATIONS ANTILOADING P0 & 0 ø25mm and ømm 70x25mm, 70x98mm, 70x4mm and 5x230mm cutsheets DA Grinding on Acrylic Panels: mm Disc, 00 RPM Grit Size DA Grinding on Acrylic Panels: mm Disc, Stock Removal at 2 min 00 RPM Grit Size, Rz at 2 min Stock Removal at 2 min, Rz at 2 min The new achieves a more consistent, uniform scratch pattern allowing us to maintain an acceptable surface finish even at the higher cut rates. MULTIAIR PLUS OPTIMAL PERFORMANCE & EFFICIENCY *Madetoorder FEATURES Very high cut rate. Lasts up to 2 times longer than Less downtime, better cost/ performance ratio MULTIAIR PLUS SANDING DISCS Rz (microinch) Rz (microinch) The waterbased stearate, NoFil coating provides maximum load resistance, extending life even more. Operators do more with each disc in less time and downtime changing spent discs is minimized. APPLICATIONS Grinding test on Acrylic Panels: mm Disc, 00 RPM Grit Size Grinding test on Acrylic Panels: mm Disc, 00 RPM Grit Size The combination of Norton SG and premium heattreated grains provides the most aggressive yet coolest cut, with maximum resistance to loading. This results in higher cut rates and extended life as much as 2: vs. DENSITY QUALITY THAT PAYS 0 in discs in cut sheets P3 0 in Touch discs Unique fibrereinforced latex paper Waterbased NoFil Nopigment More consistent uniform scratch pattern Flexible & tear resistant Resists clogging during use. No risk of colour transfer DA Grinding on 2K painted panels: mm Disc, 00 RPM PERFORMANCE IS SIGNIFICANTLY HIGHER THAN + 39% increase in P0 + 00% increase in 0 SaintGobain Abrasifs Rue de l Ambassadeur B.P.8 F78702 Conflans Cedex France Tel: +33 (0) Fax: +33 (0) Norton, MultiAir and NoFil are registered trademarks and SG is a trademark of SaintGobain Abrasives. Form # 2663

5 MULTIAIR PLUS DISCS 25 x P * * P P touch Designed with the user in mind, MultiAir sanding blocks are ergonomic, resistant and built for performance. The special rubber grip provides good handling. All the MultiAir blocks are provided with a regulating valve to regulate suction power and optimize air/dust flow. *Madetoorder MATERIALS Automotive Aftermarket (sanding on filler, primer, paint and clearcoat; suited for ceramic coating, composite parts) Filler, primer, paint and lacquers Automotive Industry (body assembly, composites, bumpers) Composites MULTIAIR PLUS DISCS Diameter: 25mm and mm Abrasive: Norton SG Ceramic blended with premium, heat treated aluminium oxide Grit Range:, P, P,, P2,,, P3,, P0, 0 Backing: Blue fibrereinforced latex paper, (P: Cweight / P0: Bweight) Antiloading properties: Special feature: Water based NoFil agent, resists clogging during use Colourless bond system 5 x 230mm The 4 metre flexible tube is provided with a universal conical adaptor that can be connected to any vacuum system. This universal adaptor can be removed to be connected directly to an adapted vacuum system. 25 / 30mm x 4m SANDING BLOCK STARTER KIT MULTIAIR PLUS CUT SHEETS Metal (aluminium, steel etc.) 70 x 4mm MultiAir Plus Touch discs are made with a flexible foam layer on highquality Norton abrasive paper, with high performance and exceptional long life, directly attached to the abrasive paper. Wood (hard and soft) 70 x 98mm ATTACHABLE HOSE Ceramic coatings Epoxy coating 70 x 25mm MULTIAIR PLUS SOFT TOUCH The foam layer absorbs easily differences in surface contours, maintaining an excellent cutting action for a high level finish. MARKETS & APPLICATIONS Wind Power Industry (blade finishing and rework) P0 0 scratch pattern, allowing to maintain the desired surface finish while providing higher cut rates. MultiAir Plus extends the MultiAir range to answer the most critical industrial demands. Aircraft Industry (body assembly and repair) Velcro 0 P0 Using a combination of Ceramic SG abrasive and premium heattreated aluminium oxide, provides the most aggressive, coolest cut to date. With good wear resistance, it gives the longest possible life, up to 2 times longer than conventional designs. MultiAir Plus achieves a more consistent and uniform Marine and Composites (mould sanding, gel coat repair) P2 Wood Industry (furniture, kitchens) x 8 P Made with premium NoFil SG Ceramic Grain, Norton MultiAir Plus is designed for the most demanding sanding applications. MULTIAIR SANDING BLOCKS The special NoFil coating of MultiAir Plus prevents buildup of dust and avoids premature clogging. In very fine grits, it can be used for final dry sanding operations before spraying without the risk of runs. Selfgripping fixing for easy application and removal from sanding block. Starter Kit MULTIAIR SANDING BLOCK KIT 70 x 25mm 70 x 98mm 70 x 4mm 5 x 230mm P P P * P *Madetoorder Manual sanding block with a set of 3 selfgripping interchangeable plates (plane, concave and convex) to be used with MultiAir discs, also Touch version. Kit contains air valve for better aspiration. Fits MultiAir mm discs

6 MULTIAIR BACKUP PADS PERFORMANCE OF The innovative MultiAir backup pad design draws dust into a collecting chamber allowing optimal airflow and powerful dust extraction. High performance, high productivity and a clean surface and working environment are the outcome of this innovative design. MultiAir backup pad mm is available in 3 densities (25mm in medium and soft): FAST CUT: REDUCE FINISHING COSTS HARD Heavy duty sanding, best for flat surfaces or dimensions MEDIUM Scuffing, shaping, sanding and finishing, for use on filler, primer, paint, clear coat, wood, plaster, composites, metal SOFT Final sanding, to obtain the best finishes 25mm 25mm mm mm Medium Hard Packed in individual boxes with Festo Adapter, 2 x M8 & 5/6 bolts and 3 fibre ring spacers. MULTIAIR PROCESS INTERFACE PADS Adapter for Rupes * MORE CONSISTENT FINISHING DISCS ABRASIVE Ceramic SG alumina CUTSHEETS BENEFITS Adapted for all work conditions BACKING The fibrereinforced, latex saturated paper (CWeight for P, BWeight for finer grits) provides a % 60% improvement in tear strength while maintaining flexibility. FOR THE MOST DEMANDING SANDING APPLICATIONS ANTILOADING P0 & 0 ø25mm and ømm 70x25mm, 70x98mm, 70x4mm and 5x230mm cutsheets DA Grinding on Acrylic Panels: mm Disc, 00 RPM Grit Size DA Grinding on Acrylic Panels: mm Disc, Stock Removal at 2 min 00 RPM Grit Size, Rz at 2 min Stock Removal at 2 min, Rz at 2 min The new achieves a more consistent, uniform scratch pattern allowing us to maintain an acceptable surface finish even at the higher cut rates. MULTIAIR PLUS OPTIMAL PERFORMANCE & EFFICIENCY *Madetoorder FEATURES Very high cut rate. Lasts up to 2 times longer than Less downtime, better cost/ performance ratio MULTIAIR PLUS SANDING DISCS Rz (microinch) Rz (microinch) The waterbased stearate, NoFil coating provides maximum load resistance, extending life even more. Operators do more with each disc in less time and downtime changing spent discs is minimized. APPLICATIONS Grinding test on Acrylic Panels: mm Disc, 00 RPM Grit Size Grinding test on Acrylic Panels: mm Disc, 00 RPM Grit Size The combination of Norton SG and premium heattreated grains provides the most aggressive yet coolest cut, with maximum resistance to loading. This results in higher cut rates and extended life as much as 2: vs. DENSITY QUALITY THAT PAYS 0 in discs in cut sheets P3 0 in Touch discs Unique fibrereinforced latex paper Waterbased NoFil Nopigment More consistent uniform scratch pattern Flexible & tear resistant Resists clogging during use. No risk of colour transfer DA Grinding on 2K painted panels: mm Disc, 00 RPM PERFORMANCE IS SIGNIFICANTLY HIGHER THAN + 39% increase in P0 + 00% increase in 0 SaintGobain Abrasifs Rue de l Ambassadeur B.P.8 F78702 Conflans Cedex France Tel: +33 (0) Fax: +33 (0) Norton, MultiAir and NoFil are registered trademarks and SG is a trademark of SaintGobain Abrasives. Form # 2663