Regional Conference on Automotive Research (ReCAR) 2011

Transcription

1 Regional Conference on Automotive Research (ReCAR) 2011 Presentation Schedule Day 1 (14 th December 2011) Time 8:30 9:00 9:00 9:10 Venue/Session BALLROOM 1 & 2 Registration Welcoming Speech Professor Dr. Norhamidi Muhamad 9:10 9:50 9:50 10:30 Keynote Speech 1: Mr. Mohamad Madani Sahari CEO, Malaysia Automotive Institute (MAI) Title: Policy in Malaysian Automotive Keynote Speech 2: Mr. Muhammad Aris Anuar Head of Manufacturing, PROTON Title: Trends in Advanced Automotive Manufacturing (Session Chair: Professor Dr. Shahrum Abdullah, Universiti Kebangsaan Malaysia) 10:30 10:50 Tea break Day 1 (14 th December 2011) 1

2 Parallel Session 1 Ballroom 1 Ballroom 2 Parallel Session 1A: Advanced Vehicle Dynamics/ Mechatronics (Session Chair: Prof. Dr.-Ing. Dieter Schramm/ Dr.-Ing. Tobias Bruckmann) Parallel Session 1B: Energy/Engine (Session Chair: To be confirmed) 10:50 P104: Performance of Hood System and Head Injury Criteria Subjected to Frontal Impacts J. M. Nursherida, B.B. Sahari, A.A. Nuraini, Aidy Ali, A.A. Faieza, Tuan Hafandi Tuan Ismail, Azim Azizi, M.S. Salwani, M.S. Nabilah, S.S. Aini, M. Shahril, and M.H. Norhidayah P001: Hydrogen blended with Gasoline, Diesel, Natural gas (NGV) as an Alternative Fuel for ICE in Malaysia Halim Razali, Kamaruzzaman Sopian, Baharuddin Ali, Sohif Mat 11:05 P012: Performance Analysis of Inerter with Controllable Suspension Systems, Soong, M. F. Ramli, R, and Mahadi, W. N. L P007: Clean Automotive Technology: Hydraulic Hybrid Vehicles (HHVs), Ramin Solouki Bonab, and Saidur Rahman 11:20 P009: Braking Torque Analysis on Electromagnetic Braking Study Using Eddy Current For Brake Disc of Al6061 and Al7075 M.Z.Baharom,M.Z.Nuawi,S.M.Haris, and G.Priyandoko P015: Effect of Intake Manifold Angle of Port-Fuel Injection Retrofit-kit to the Performances of an S.I. Engine Mohd Faisal Hushim, Ahmad Jais Alimin and Mohd Farris Mansor 11:35 P020: Power Analysis of Light Electric Vehicles using Fundamental Calculations M. Sabri and M. Rezal P021: Homogenous Charge Compression Ignition (HCCI) Technique: A Review for Application in Two-Stroke Gasoline Engines, Amin Mahmoudzadeh Andwari and Azhar Abdul Aziz 2

3 Day 1 (14 th December 2011) Parallel Session 1 Ballroom 1 Ballroom 2 Parallel Session 1A: Advanced Vehicle Dynamics/ Mechatronics (Session Chair: Prof. Dr.-Ing. Dieter Schramm/ Dr.-Ing. Tobias Bruckmann) Parallel Session 1B: Energy/Engine (Session Chair: To be confirmed) 11:50 P023: Shuffle Frequency Migration of 4WD Vehicle, Raja Mazuir bin Raja Ahsan Shah, Caizhen Cheng, R. Peter Jones, and Jasjit Pawar P120: A Study on Alternative Fuel for Homogeneous Charge Compression Ignition (HCCI) Engine Azali Awaludin, Mohd Zaki Nuawi, Yusuf Ali, Wan Mohd Faizal Wan Mahmood and Taib Iskandar 12:05 P029: Design and Development of Simple Control System for Small Hybrid Electric Vehicle Danardono A. Sumarsono, Didi Widya Utama and Gandjar Kiswanto P050: Mathematical Model of Eco-Driving for Energy Optimization for Electric Vehicle Md Ridzuan M.Y, Alias A, and Nik Rumzi N.I 12:20 P035: A Study on Load Dependent Controller Performance for Mechatronic Suspensions Wajdi S. Aboud, Sallehuddin Mohamed Haris P051: Comparing of Effects of Hydrogen Addition on Performance and Exhaust Emission in a Spark Ignition Engine Based on Type of Fuel Consumption, Javad Zareei, Yusoff Ali, Shahrir Abdullah, and Wan Mohd Faizal Wan Mahmood 12:35 1:00 Photo Session 3

4 Day 1 (14 th December 2011) Parallel Session 1 Ballroom 1 Ballroom 2 Parallel Session 1A: Advanced Vehicle Dynamics/ Mechatronics (Session Chair: Prof. Dr.-Ing. Dieter Schramm/ Dr.-Ing. Tobias Bruckmann) Parallel Session 1B: Energy/Engine (Session Chair: To be confirmed) 1:00 2:15 Lunch Break Day 1 (14 th December 2011) Time Venue/Session BALLROOM 1 & 2 2:15 2:55 Keynote Speech 3: Professor Ir. Dr. Shahrir Abdullah Universiti Kebangsaan Malaysia Title: Automotive Grid: Providing Supercomputing Highway for Automotive Research Community (Chair: Professor Dr. Shahrum Abdullah, Universiti Kebangsaan Malaysia) 2:55 3:15 Tea break 4

5 Day 1 (14 th December 2011) Parallel Session 2 Ballroom 1 Ballroom 2 Parallel Session 2A: Advanced Vehicle Dynamics/ Mechatronics (Session Chair: Dr. Sallehuddin Mohamed Haris) Parallel Session 2B: Energy/Engine (Session Chair: Prof. Ir. Dr. Shahrir Abdullah) 3;15 P115: Design of Real-time Monitoring System for Measurement of Battery Parameters of Electric Vehicle Arun Kumar, K. Senthil Kumar and Deepak Kumar Mahto 62: Experimental study of an Internal Heat Exchanger Influence on R134a Automobile Air Conditioning System Salman Bahrami, Hasan Mohammad Beigi, Mohammad Hosein Sabour 3:30 P049: Verification of 14DOF Full Vehicle Model Based on the Driver Input from the Steering Wheel, Z. A. Kadir, K. Hudha, F. Ahmad, M. F. Abdullah, A. R. Norwazan, M. F. M. Yusoff, K. A. Jalil and M. Gunasilan P101: Numerical Simulation of In-cylinder Tumble Flow Field Measurements and Comparison with Experimental Results A. Mohammadebrahim, M. B. Shafiei, and S. K. Hannani 5

6 Day 1 (14 th December 2011) Parallel Session 2 Ballroom 1 Ballroom 2 Parallel Session 2A: Advanced Vehicle Dynamics/ Mechatronics (Session Chair: Dr. Sallehuddin Mohamed Haris) Parallel Session 2B: Energy/Engine (Session Chair: Prof. Ir. Dr. Shahrir Abdullah) 3:45 P106: Crashworthy Characteristics of Rear Bumper System Subjected to Rear Impact Test A. Azim, A.A. Faieza, B.B. Sahari, Aidy Ali, A.A. Nuraini, Tuan Hafandi Tuan Ismail, M.S. Salwani, J.M. Nursherida, M.S. Nabilah, S.S. Aini, M. Shahril, and M.H. Norhidayah P097: Experimental Analysis on Engine Performance and Emission Characteristics using Biodiesel obtained from Non-edible Oil, A.M. Liaquat, H.H. Masjuki, M.A. Kalam, M. Varman and M.A. Hazrat 4:00 P026: Structural Modification of Disc Brake Judder using Finite Element Analysis Matthias Edric Bengsoon, Abd Rahim Abu Bakar and Mohd Kameil Abdul Hamid P019: Comparison of Lift and Drag Force of Sedan Car Spoiler, A.R. Norwazan, A.J. Khalid, A.K. Zulkiffli1, O. Nadia and M.N. Fuad 4:15 P068: Nonlinear State Estimation of Tire-Road Contact Forces using a 14 DoF Vehicle Model, Lawrence Louis and Dieter Schramm P066: Underhood Fluid Flow and Thermal Analysis for Passenger Vehicle, Lukeman Yusoff, Lim Fang Yau, Shahrir Abdullah, Rozli Zulkifli, Azhari Shamsudeen and Mohammad Khatim Hasan 4:30 P073: Vehicle Speed Control Using Gain Scheduling PID Controller, Faizul Akmar Abdul Kadir, Khisbullah Hudha and Mohd Zakaria Mohammad Nasir P030: Prediction of In-Cylinder Soot Particle Paths for a DI Diesel Engine Wan Mohd Faizal Wan Mahmood, Paul J. Shayler, Antonino La Rocca, Fabrizio Bonatesta 6

7 Day 1 (14 th December 2011) Parallel Session 2 Ballroom 1 Ballroom 2 Parallel Session 2A: Advanced Vehicle Dynamics/ Mechatronics (Session Chair: Dr. Sallehuddin Mohamed Haris) Parallel Session 2B: Energy/Engine (Session Chair: Prof. Ir. Dr. Shahrir Abdullah) 4:45 P079: Modeling, Simulation and Validation of 9 DOF Vehicle Model for Automatic Steering System, Mohd Zakaria Mohammad Nasir, Khisbullah Hudha, Mohd Zubir Amir and Faizul Akmar Abdul Kadir P070: Experimental Investigation on the Effect of Container Geometry Change to Liquid Sloshing Mohd Irwan Mohd Azmi, Muhammad Syahrail Mahmud1, Azma Putra, Fudhail Abdul Munir, Mohd Rody Mohamad Zin, Nadlene Razali, Mohd Adrinata Shaharuzaman and Nur Rashid Mat Nuri 5:00 P084: Modeling of a Twin-Track Vehicle Model with Modular Wheel Suspension, Michael Unterreiner and Dieter Schramm P111: Development of a Computational Fluid Dynamics Model for Direct Injection Hydrogen Fueled Engine Khalaf I. Hamada, M.M. Rahman and A. Rashid A. Aziz 5:15 P092: Design of a Mechatronic Drive-Train with Regenerative Braking Veera Ragavan.S, Chin H.C Desmond and Madhavan S P006: Numerical Study of Multiple Channel Road Vehicle Underbody Diffusers B.Daryakenari, S.Abdullah, R.Zulkifli and E.Sundararajan 7

8 Time Venue/Session BALLROOM 1 & 2 9:00 9:40 9:40 10:20 Keynote Speech 4: Prof. Dr. Ir. Benjamin Soenarko Maranatha Christian University, Indonesia Title: An inverse problem solution in acoustics using Boundary Element Method (BEM) for source characteristic identification Keynote Speech 5: Prof. Dr.-Ing. Dieter Schramm (University Duisburg-Essen, Germany) Title: Electric Mobility (Session Chair: Professor Dr. Shahrum Abdullah) 10:20 10:40 Tea Break Parallel Session 3 Time Ballroom 1 Balloom 2 Delima Room 8

9 Parallel Session 3A: Signal Analysis/NVH (Session Chair: To be confirmed) Parallel Session 3B: Computational Mechanics (Session Chair: Prof. Dr. Ahmad Kamal Ariffin Mohd Ihsan) Parallel Session 3C: Materials and Design (Session Chair: Associate Professor Dr. Zulkifli Mohd Nopiah) 10:40 P086: A Study on Lower Suspension Arm Fatigue Data Behaviour by using Cycle Count Methods Z. M. Nopiah, A. Lennie, S. Abdullah, M. Z. Nuawi, A. Z. Nuryazmin, M. N. Baharin P105: Introducing Fatigue Contour Plot in LS Prepost LSDYNA Finite Element Crash Simulation Software S.S. Aini, B.B. Sahari, Aidy Ali, A.A. Nuraini, A.A. Faieza, Tuan Hafandi Tuan Ismail, M. Shahril, M.S. Nabilah, M.S. Salwani, J.M. Nursherida, A. Azim, and M.H. Norhidayah P082: Design of UTeM Perodua Eco Challenge Vehicle, Ammar Alfaiz M. A., Muhammad Zahir M. H., Musthafah M. T., Herdy R., Mohd Adrinata M. S.5, and Muhd Ridzuan M 10:55 P059: Characterisation of the Sound and Vibration Signal of Impact Testing on Automotive Component Materials, Abdul Rahim Bahari, Mohd Zaki Nuawi, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan and Mohd Basri Ali P112 Ductile Failure Prediction of Spot Welded Lap Joint A.A. Borhana, A.T. Mohamad, A. Abdul-Latif, Z. Ahmad, A. Ayob and M.N. Tamin P076: Wet Sump Design for an FSAE Racing Car, Akshay Sethi 11:10 P060: A Study on Validation of Fatigue Damage Clustering Analysis Technique based on Validity Coefficent Index, M.N. Baharin, Z.M.Nopiah, S.Abdullah, and M.S.M.Noor P011: Prediction of Fatigue Crack Propagation of Rail Material Using 2D Finite Element Modeling, N. A. Akeel, Z. Sajuri and A. K. Ariffin P018: New In-Wheel Electric Motor Design for Small Electric Vehicle using Opera2D, M. Rezal and Dahaman Ishak 9

10 Parallel Session 3 Time Ballroom 1 Balloom 2 Delima Room Parallel Session 3A: Signal Analysis/NVH (Session Chair: To be confirmed) Parallel Session 3B: Computational Mechanics (Session Chair: Prof. Dr. Ahmad Kamal Ariffin Mohd Ihsan) Parallel Session 3C: Materials and Design (Session Chair: Associate Professor Dr. Zulkifli Mohd Nopiah) 11:25 P061: Development of Ultrasonic Test Rig System for Fuel Injector Y. Istihat, M. Z. Nuawi, A. R. Bahari and W. M. F. W. Mahmood P024: Elastic Plastic Analysis of Surface Cracks in Round Bars under Bending Moments, AE Ismail, AK Ariffin, S Abdullah, MJ Ghazali and MR Jamli P096: Development of Pulsating Twin Jet Mechanism for Jet Impingement Heat Transfer Rozli Zulkifli, Ali Ahmed Gitan, Kamaruzzaman Sopian, Shahrir Abdullah 11:40 P063: Suppressing Noise in Windscreen Wiper Operation Using Robust Hybrid Controllers, Ali Zolfagharian, Mohd Zarhamdy Md. Zain, Abd Rahim Abu Bakar and Azizan As arry P117: A Multi Objective Optimization Example in the Automotive Area with modefrontier Rosario Russo, Alberto Clarich and Marco Carriglio P053: Modeling Brake Torque Of CNGDI Engine Using Two-Stage Regression Technique Mohd Khair Hassan and Ishak Aris 11:55 P071: Noise, Vibration And Harshness (NVH) Study On Malaysian Armed Forces (MAF) Tactical Vehicle A.A. ShamsulAkmar, M.S.Risby, P. Muhammad Hazwan and M.Y.Mohd Abdullah P078: Sensitivity of Modeling in Sheet Metal Three-point Cyclic Bending M. R. Jamli, A. K. Ariffin, D. A. Wahab, A.E. Ismail, and I. A. Shah P110: Development of UKM Solar Car TUAH for Shell Eco-Marathon Asia 2011 Azli A., Mohd Faizal M.T, Mohd Anas M.S., Shahrum A. and Azhari S. 10

11 Parallel Session 3 Time Ballroom 1 Balloom 2 Delima Room Parallel Session 3A: Signal Analysis/NVH (Session Chair: To be confirmed) Parallel Session 3B: Computational Mechanics (Session Chair: Prof. Dr. Ahmad Kamal Ariffin Mohd Ihsan) Parallel Session 3C: Materials and Design (Session Chair: Associate Professor Dr. Zulkifli Mohd Nopiah) 12:10 P039: Stress-strain Behaviour of a Novel Parabolic Spring for Light Duty Vehicle Y. S. Kong, M.Z. Omar, L.B. Chua, S. Abdullah P064: Forecasting of the Mechanical Properties of Nano-Structured Cr-WC Coatings During Electrodeposition Process Using Artificial Neural Network Javad Rajabi, S. Nadali, Esmaeil Alibeiki, Maryam Rajabi and Jamal Rajabi P087: Automotive Ecosystem in Malaysia A Conceptual Model to Explain Vehicle Ownership and Car Maintenance Issues, Zulhaidi Mohd Jawi, Fauziana Lamin, Abdul Rahmat Abdul Manap, Fuad Abbas, Khairil Anwar Abu Kassim, and Wong Shaw Voon 12:25 P085: Elevated Temperature Fatigue Fracture Behaviour of Aluminium Alloy Subjected to Spectrum Loadings, K.A.Zakaria, S. Abdullah, and M.J. Ghazali P089: Novel Design of Impact Attenuator for an Eco Challenge Car Amir Radzi Ab. Ghani, Ramlan Kasiran, Mohd. Shahriman Adenan, Mohd. Haniff Mat, Rizal Effendy Mohd. Nasir, Mohd. Faizal Mohamad, and Wan Ahmad Najmi Wan Mohamed P122: Evaluation of Driver's Pre-Driving Skill on A Driving Simulator Using the Intelligent Dynamic Event Classifier (IDEA) Method Mohamad Hanif Md Saad, Aini Hussain, Muhammad Faiz Mohd Shukri, Mohd Jailani Mohd Nor and Mohd Rezdwan Rosli 12:40 2:00 Lunch Break 11

12 Parallel Session 4 Ballroom 1 Ballroom 2 Delima Room Parallel Session 4A: Signal Analysis/NVH (Session Chair: Prof. Dr. Ir. Benjamin Soenarko) Parallel Session 4B: Materials (Session Chair: Dr. Rozli Zulkifli) Parallel Session 4C: Materials and Design (Session Chair: Associate Professor Dr. Mohd Zaki Nuawi) 2:00 P088: Feature Selection for Fatigue Segment Classification System using Elitist Non- Dominated Sorting in Genetic Algorithm M.H. Osman, Z.M. Nopiah and S. Abdullah P033: Corrosion Effect on Car Welded Jointed in terms of Sea Environment Effect M.F. Abdullah, M.F. Idris, A.Z.A. Kamal Z.A. Kadir, M. Gunasilan and M.F.M. Yusoff P114: Quality Improvement in Three-Way Catalytic Converter (TWC) System using Failure Mode and Effect Analysis Syed Najib Syed Bahari and Wan Ahmad Wan Yusoff 2:15 P095: Review on The Application of Driving Simulator for Research and Training Activities In Malaysia Muammar Quadaffi Mohd Ariffin, Rabihah Ilyas, Mohd Firdaus M.S, Nurulhana Borhan and Mohamad Hanif Md Saad P077: Investigation of Energy Absorbed Produced from an Instrumented Charpy Impact on Automotive Specimens M. B. Ali, S. Abdullah, M.Z. Nuawi and A. K. Ariffin P034: Experimental and Analytical Durability Assessment of SAE 1045 Steel under Service Loadings Nawar A. Khadim 12

13 Parallel Session 4 Ballroom 1 Ballroom 2 Delima Room Parallel Session 4A: Signal Analysis/NVH (Session Chair: Prof. Dr. Ir. Benjamin Soenarko) Parallel Session 4B: Materials (Session Chair: Dr. Rozli Zulkifli) Parallel Session 4C: Materials and Design (Session Chair: Associate Professor Dr. Mohd Zaki Nuawi) 2:30 P054: Development of 2D Image Capture Method Software for Recognizing Drivers Postural Angles Darliana Mohamad, Baba Md Deros and Dzuraidah Abdul Wahab P038: Microstructural Characterization of ZrO2 Layer Coating On Martensitic Stainless Steel Siti Hawa Mohamed Salleh, Mohd Zaidi Omar, Mohd Nazree Derman and Shaiful Rizam Shamsudin P119: Effects of Rim and Web Thickness on Root Stresses on Thin-Rimmed helical Gear Imaduddin Helmi,W.N., Daing Idris,D.M.N., Hafis,S.M., Che Abdullah,S.S., Ando,K., Miyachika, K. and Koide, T 2:45 P003: Fatigue Failure Assessment of Variable Amplitude Loading (VAL) on Carbon Steel AISI 1045 using I-kaz Approach, M. M. Padzi, S. Abdullah, M. Z. Nuawi P107: Performance of Aluminium Alloy Side Door Subjected to Pole Impact Test A. Azim, Aidy Ali, B.B. Sahari, A.A. Nuraini, A.A. Faieza, Tuan Hafandi Tuan Ismail, M.S. Salwani, J.M. Nursherida, M.S. Nabilah, S.S. Aini, M. Shahril and M.H. Norhidayah P121: Evaluation of Different Control Algorithm of Semi-active MR Fluid Damper of a Quarter Car Model Mahmudur Rahman, Muhammad M. Rashid, Asan G.A. Muthalif, and Banna Kasemi 13

14 Parallel Session 4 Ballroom 1 Ballroom 2 Delima Room Parallel Session 4A: Signal Analysis/NVH (Session Chair: Prof. Dr. Ir. Benjamin Soenarko) Parallel Session 4B: Materials (Session Chair: Dr. Rozli Zulkifli) Parallel Session 4C: Materials and Design (Session Chair: Associate Professor Dr. Mohd Zaki Nuawi) 3:00 P014: Fatigue Life Assessment of Aluminium Alloy 6061 Specimen Using Signal Analysis Approach, N. A. Azmir, S. Abdullah, M. M.Padzi and, S. F. Samsuri P002: Effect of Retrogression Medium to the Mechanical Properties of Aluminum Alloy 7075 Ng Guan Yao, Mohd Warikh bin Abd Rashid, B. Zolkepli, N. Nadiah, and S.C. Leng P100: Development of UKM CARevo for Perodua Eco-Challenge 2011 Wan Mohd Faizal W.M., Mohd Anas M.S., Mohd Faizal M.T., Azli A., Rozli Z., Nordin J., Sallehuddin M.H., Rizauddin R., Shahrum A., Shahrir A., and Azhari S :35 Tea Break 3:35 P083: Analysis on Impact Performance of Aluminum Automotive Side Member M.S. Salwani, Aidy Ali1,b, B.B. Sahari, A.A. Nuraini1, A.A. Faieza, Tuan Hafandi Tuan Ismail, J. Mai Nursherida, Azim Azizi, Nabilah Mohd Safar, Siti Aini Satuan, Shahril Mohamad, and Norhidayah Muhamed P090: A Comparative Study on the Effect of Air Gap on Sound Transmission Loss Provided by Double Glazed Panels Zambri Harun, Elwaleed Awad, Mohd Jailani Mohd Nor and Muhamad Razi P058: Impact Response of Thin-Walled Tubes A Prospective Review Fauziah Mat, Khairul Azwan Ismail, Sazali Yaacob and Othman Inayatullah 14

15 Parallel Session 4 Ballroom 1 Ballroom 2 Delima Room Parallel Session 4A: Signal Analysis/NVH (Session Chair: Prof. Dr. Ir. Benjamin Soenarko) Parallel Session 4B: Materials (Session Chair: Dr. Rozli Zulkifli) Parallel Session 4C: Materials and Design (Session Chair: Associate Professor Dr. Mohd Zaki Nuawi) 3.50 P080: Vibration Analysis of Blocked Circular Pipe Flow Liyana Tajul, Hasnul Hadi and M.R. Roslan P045: MFI Zeolite Membrane from Rice Husk for Biofuels Production Jufriadi, Hens Saputra, and A.G.E Sutjipto P044: New Concept for Reducing Wire- Harness And Implementing Advanced Facilities for Non-Luxury Vehicles by Applying POF Mohammad Syuhaimi Ab-Rahman, Farshad Nasimi Khameneh, and Hadi Guna 4:05 P074: Quantification of Field of View and Blind Zone Reduction for Safe Driving Madhavan Shanmugavel P091: Impact Performance of Low Carbon Steel Safety Beams for Car Doors A.A.Lashlem, Dzuraidah Abd Wahab, Shahrum Abdullah and Che Hassan Che Haron P113: Deformation Response of Steel Sheet Metal Under Transverse Dynamic Loading S.S. Arsad, A. Ayob, Z. Ahmad, A. Abdul-Latif, M.N. Tamin 4:20 P118: Effect of Load Carriage on the Backpack Vibration System Sharifah Alwiah Abdul Rahman, Azmin Sham Rambely and Rokiah Rozita Ahmad P103: Determination of Leg Injury Criteria Subjected to Frontal Impacts J. M. Nursherida, A.A. Nuraini, B.B. Sahari, Aidy Ali, A.A. Faieza, Tuan Hafandi Tuan Ismail, Azim Azizi, M.S. Salwani, M.S. Nabilah, S.S. Aini, M. Shahril, and M.H. Norhidayah P042: Accurate Prediction of Springback in Forming of BIW Parts Nagur Aziz Kamal Bashah, Ahmad Zakaria, Khairul Za im Kamarulzaman, Achmed Mobin, Mohd Safuan Mohd Abdul Lazat, Norhamidi Muhamad, Baba Md Deros 15

16 Parallel Session 4 Ballroom 1 Ballroom 2 Delima Room Parallel Session 4A: Signal Analysis/NVH (Session Chair: Prof. Dr. Ir. Benjamin Soenarko) Parallel Session 4B: Materials (Session Chair: Dr. Rozli Zulkifli) Parallel Session 4C: Materials and Design (Session Chair: Associate Professor Dr. Mohd Zaki Nuawi) 4:35 P005: Inverse Power Law Model for Extrapolation of Fatigue Life Curves E.A. Azrulhisham, D.A. Wahab, S. Abdullah, N.A.N. Mohamed and C.H. Che Haron P116: Thermal Analysis Technique in Assessing Interaction between Bismuth and Strontium in Scrap-like Aluminium Alloy Saeed Farahany, Ali Ourdjini, Mohd H.Idris and Ashkan V.Takaloo P022: The Effects of Pad Surface Topography on Disc Brake Squeal Ahmad Razimi Mat Lazim, Mohd Kameil Abdul Hamid and Abd Rahim Abu Bakar 4:50 P013: Whole Body Vibrations Exposure to Malaysian Driver by Using Novel IKaz Method A. R. Ismail1, M. Z. Nuawi, N. F. Kamaruddin, M.N.A. Rahman P123: Design of Special Purpose Off Road Vehicle (SPORV) for Unmanned Ground Vehicle Application Aizul Fazli Suhaimi,,Mohamad Hanif Md Saad, Muhammad Faiz Mohd Shukri, Shamsul Akmar Bin Ab Aziz and Mohd Fazli Mohd Yusoff 16