ADC LLC Company Overview Presentation
|
|
- Alannah Lloyd
- 6 years ago
- Views:
Transcription
1 ADC LLC Company Overview Presentation July 2016
2 Company Overview - GM products GM is 60% of ADC work booked currently. ADC is providing the Low - Reverse Clutch Housings for the 6T30 and 6T40 transmissions.
3 GM products ADC is providing Gen V front cover assemblies since mid 2013.
4 GM products ADC provides BAS+ Bracket Assembly
5 Other current GM engine and transmission brackets
6 Past GM products ADC has also provided L6/5/4 Front cover with oil pump assembly and the P/S Compressor Bracket to Tonawanda Plant 5 and Flint South Engine
7 Other past GM engine and transmission brackets
8 New GM products also have provided Drive Motor Supports (A&B) for the new 2017 GFE transmission
9 New GM products also have provided pre-production Clutch Housings and Pistons for the new 2018 GF9 transmission.
10 Technology Latest technology being used CNC machine tools allow flexible cells. Modular assembly line was built in phases. Proven production standards Die cast machines are equipped with latest options. Robotic cells created where needed.
11 Die Casting New high efficiency stack melt furnace.
12 Die Casting State of the art Die Cast centers with auto spray, auto extraction. Toshiba 900 ton
13 Die Casting ton Die Cast centers with Robotic spray, extraction.
14 CNC Machining High speed CNC centers with robotic load/unloading. 78 CNC machines in house.
15 Assembly Modular Assembly cells
16 Automatic Test stands Inline stands where required Leak Testers
17 Telesis 2D pin mark date code and inspection, tying all data collected back to part. Product Traceability
18 X-Ray Machine Fluoroscope Real-Time Imaging
19 Real time X-ray in house
20 Engineering Capabilities In house Metal Flow & Fill Simulation
21 Data Communication Trained Unigraphics engineers in house. Data transfer using AutoWeb System. Unigraphic models used by all major ADC suppliers, ie: Mold maker, trim die maker, machining fixture supplier, leak test station manufacturer.
22 Engineering Capabilities Innovative Machining concepts
23 Competitive Analysis Established facility (115,000 square feet, 70% filled). Experience in g-rotor pumps. Experience in front cover assemblies including captured fasteners. Experience in a wide selection of Engine Accessory Brackets. Overall wide variety of die cast experience.
24 Quality ISO/TS 16949:2009 Certified Last audit 17-April-2016 Certified Minority supplier
25 Current Status Clutch Housing projects mature and successful. Gen V Front cover assemblies in production. GF9 preparing to launch early new GM brackets launched in 2016 and running.
26 Warranty History Zero warranty claims for Bad oil pumps in L6/5/4 Front Cover since start of production August Over 2.7M Front cover assemblies shipped to date. 2,177,000+ Clutch housings shipped to date. Zero warranty claims. 1,980,000+ V6, V8 and Corvette Gen V front covers shipped. Zero warranty claims.
27 Quality controls Quality Data Records created from PFEMA and Control Plans. In house Spectro-analysis for material certification. Majority of dimensions checked on automatic CMMs. SPC data automatically gathered from CMMs and charted. Balance of dimensions to be checked with optical comparator, hand gauges & other instruments. In house X-ray audits per QDR (Quality Data Record). All parts 100% leak tested where required.
28 Manufacturing
29 Manufacturing Location 901 Chase Ave., Elk Grove Village Duns#
30 Plant Layout
31 ADC Core Team ADC TEAM MEMBERS Pat Tang President Nancy Bahrs - Quality Manager Dave Ohman Operations Manager Mike Lumpp - Sr. Manufacturing Engineer Mike Terrazas Project Engineer Gary Pribyl Die Cast Engineer
32 2 Quality engineers 4 Process engineers 9 Quality inspectors 6 Line supervisors 5 Maintenance techs 5 Tooling techs 39 Die cast techs 52 CNC techs Resources
33 Thank You for your time Statement of Confidentiality This document is proprietary to ADC LLC. This document is distributed with the understanding that it will be not be disclosed or used, in whole or part, for any other purpose than for what it is intended, without the prior written consent of ADC LLC.
Company Profile. UNpa Engineering
Company Profile UNpa Engineering Strategies to Achieve Vision Present Further scope Conventional Machining Mass Production work VMC-Machining as per NC tool path Tool Design- Development of CAD/CAM data
More informationSMW Introduction Presentation 2017
Introduction Presentation 2017 COMPANY DNA OWNER OPERATED SMW is owner operated and relies heavily upon on entrepreneurial approach. Success starts at the top and carries itself throughout the company.
More information[ The 7 main production divisions of the Sealcore Network ]
The SEALCORE Network gathers together various Companies active for many years in the worldwide market and in many industrial sectors. The synergy and the know-how of the Companies in the SEALCORE Network
More informationABB MEASUREMENT & ANALYTICS. Predictive Emission Monitoring Systems The new approach for monitoring emissions from industry
ABB MEASUREMENT & ANALYTICS Predictive Emission Monitoring Systems The new approach for monitoring emissions from industry 2 P R E D I C T I V E E M I S S I O N M O N I T O R I N G S Y S T E M S M O N
More information.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series. International Standards NAAMS Standards
N-FORCER CER.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series International Standards NAAMS Standards Detachable mounts shown Welded mounts also available Die, Mold & Automation Components,
More informationG.W. Lisk Company, Inc. control. Valves and Solenoids. Components for Fuel, Emissions, Power Generation and Pneumatic/Hydralic Systems
control Valves and Solenoids Components for Fuel, Emissions, Power Generation and Pneumatic/Hydralic Systems G.W. LISK COMPANY G.W. LISK: Innovation. Precision. Performance. Quality. For over 50 years,
More informationMeasurement made easy. Predictive Emission Monitoring Systems The new approach for monitoring emissions from industry
Measurement made easy Predictive Emission Monitoring Systems The new approach for monitoring emissions from industry ABB s Predictive Emission Monitoring Systems (PEMS) Experts in emission monitoring ABB
More informationMOTOR COMPONENTS LAMINATIONS, STACKS, WOUND STATORS AND DIE-CAST ROTORS
MOTOR COMPONENTS LAMINATIONS, STACKS, WOUND STATORS AND DIE-CAST ROTORS www.lawkimindia.com www.godrej.com LAWKIM MOTORS GROUP Lawkim is a part of USD 4.5 billion Godrej Group. Established in 1961, Lawkim
More informationASIA PEARLITE CASTING INDUSTRIES CO.
ASIA PEARLITE CASTING INDUSTRIES CO. INTRODUCTION Asia Pearlite Casting Industries (API), located in a land of 100,000 m² in the industrial zone of Saveh (biggest industrial zone in Iran), is now producing
More informationBEST QUALITY & CUSTOMER SATISFACTION LEADER OF HOT FORGING C A T A L O G
BEST QUALITY & CUSTOMER SATISFACTION LEADER OF HOT FORGING C A T A L O G 0 NEW TECHNOLOGY WITH WORLD WIDE RECOGNITION. The company primarily manufactures driving, engine, hydraulic and fuel parts for automobiles
More informationARC Systems, Inc. is a leading supplier of AC and BLDC Motors and motion control components to the Aerospace Industry.
ARC Systems, Inc. ARC Systems, Inc. is a leading supplier of AC and BLDC Motors and motion control components to the Aerospace Industry. ARC Systems, Inc. has been producing quality motion control products
More informationRAIL ENGINEERING SOLUTIONS. Traction Gearing Bogie Manufacture & Upgrade Wheels & Axles Components Inspection & Failure Analysis
RAIL ENGINEERING SOLUTIONS Traction Gearing Bogie Manufacture & Upgrade Wheels & Axles Components Inspection & Failure Analysis Since 1969 Hofmann Engineering has provided specialist engineering services
More informationSystem Engineering for the Battery Industry. Electric mobility.
System Engineering for the Battery Industry Electric mobility. 2 3 Extensive experience, a global leader with close proximity to the customers. thyssenkrupp System Engineering is an internationally acting
More informationRoller Chase Frame Price List
Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase
More informationSFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines
SFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes
More informationRoller Chase Frame Price List
Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase
More informationWright Plastic Products Co., LLC
Wright Plastic Products Co., LLC Sheridan Facility 201 Condensery Rd. Sheridan, MI 48884 77,400 Square Feet (989) 291-3211 Madisonville Facility 351 Industrial Park Rd. Madisonville, TN 37354 37,000 Square
More informationSFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies
SFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
More informationSafanDarley The flexible bending cell
flexible bending cell E-Brake B 20T- is the new global brand of machines, created by the merger of Safan and Darley. represents a unique combination of expertise and innovative power. revolutionary electronic
More informationpowertransmissionengineering MEDIA KIT Your Guide to Reaching Power Transmission & Motion Control Components Buyers
PTE powertransmissionengineering 2012 MEDIA KIT Your Guide to Reaching Power Transmission & Motion Control Components Buyers Hit Your Target with Power Transmission Engineering and powertransmission.com
More informationBrochure. Synchronous generators for steam and gas turbines Proven generators reliable power
Brochure Synchronous generators for steam and gas turbines Proven generators reliable power We provide motors, generators and mechanical power transmission products, services and expertise to save energy
More informationISO 9001:2008 and AS9100C Certified. Over 4 Decades of Experience in Custom Precision Motion Control
ISO 9001:2008 and AS9100C Certified Over 4 Decades of Experience in Custom Precision Motion Control ARC Systems, Inc. was founded in 1967 to provide the aerospace industry with a dependable source for
More informationJMAAB: supporting MBD deployment and standardization in Japan
JMAAB: supporting MBD deployment and standardization in Japan Satoru Abe ( 阿部悟 ) Satoru.Abe@MathWorks.co.jp Japan Industry Marketing Manager June 19, 2014 2014 The MathWorks, Inc. 1 Agenda MBD status in
More informationNew Generator Products
GE Power and Water New Generator Products Generator User s Conference Anthony Arrao John Yagielski General Electric Company Schenectady, NY USA November 2015 copied or distributed in whole or in part,
More informationLAMDA COMPONENTS PVT LTD
Introduction Name of the Company : Lamda Components (P) Ltd. In Operation Since (year) : 1987 Major Customers : BOSCH Ltd, Mahindra &Mahindra, Kirloskar Toyota Textile Machinery Delphi TVS Diesel Systems
More informationFORM S.p.A. Aluminium Die-Casting Products. General Presentation
FORM S.p.A. Aluminium Die-Casting Products General Presentation Who is Form? Casting Design Concept FORM is a European Company leader in Aluminium High-Pressure Die-Casting and Machining offering specific
More informationAn ISO 9001 Certified Company. Welcome to NTZ Manufacturing USA, LLC
Welcome to NTZ Manufacturing USA, LLC NTZ Corporate History Founded 1973 during the oil crisis in Germany 1985 Concentration on Dutch aftermarket. 1986 Further development of filtration technology by P.G.W.
More informationOHM Process Pump API 685 Magnetic Drive
OHM Process Pump API 685 Magnetic Drive Sulzer Pumps Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing with a deep commitment to fully understand the needs of
More informationCFM Technology. realizing the promise 50% LOWER NOX EMISSIONS. ANOTHER LEAP FORWARD FOR LEAP TECHNOLOGY.
50% LOWER NOX EMISSIONS. CFM Technology realizing the promise ANOTHER LEAP FORWARD FOR LEAP TECHNOLOGY. Bill Brown General Manger CFM Marketing June 2010 CFM International Proprietary Information The information
More informationBetter BMS. (Photo: Blue Mountain State) James Post Managing Director. Battery Condition Test International Ltd. Hong Kong
Better BMS (Photo: Blue Mountain State) James Post Managing Director Battery Condition Test International Ltd. Hong Kong Introduction James Post Executive in high tech electronics in the Netherlands since
More informationLinamar in North Carolina. October 18, 2017
Linamar in North Carolina October 18, 2017 Linamar in North Carolina Corporate Overview Decision Process Why North Carolina Current Footprint Growth Plans Linamar Corporation 2 Global Overview Key Facts
More informationExpertise. Hydraulics. What you should know about us. excellent pressure solutions
Expertise Hydraulics What you should know about us excellent pressure solutions Welcome to Roth Hydraulics We develop and produce custom designed products and systems for fluid technology. Our core products
More informationField-Fast Racking System
Field-Fast Racking System 7.5 GW of experience is about to change the industry www.omcoracking.com Executive Summary OMCO is the largest custom roll former in the United States World leader in the manufacture,
More informationMalleable Iron. Pipe Fittings. American Standard MECH FLOW SUPPLIES JINAN MEIDE CASTING CO., LTD. JINAN MEIDE CASTING CO., LTD.
Malleable Iron Pipe Fittings JINN MEIDE CSTING CO., LTD. MECH FLOW SUPPLIES Malleable Iron Pipe Fittings JINN MEIDE CSTING CO., LTD. Ductile Iron Grooved Fittings and Couplings JINN MEIDE CSTING CO., LTD.
More informationAUTOMOTIVE. Keep your engine younger for longer. A complete range of Lubricants ENGINE OIL
AUTOMOTIVE A complete range of Lubricants Keep your engine younger for longer ENGINE OIL Total Operating worldwide Manufacturing in the UK With operations in more than 130 countries, the Total group is
More informationHow we bring Innovation to Market at Adient Improving the experience of a world in motion. Richard Chung VP, Innovation & Design
How we bring Innovation to Market at Adient Improving the experience of a world in motion Richard Chung VP, Innovation & Design We are Adient from October 31, 2016 Adient today The largest global automotive
More informationME 455 Lecture Ideas, Fall 2010
ME 455 Lecture Ideas, Fall 2010 COURSE INTRODUCTION Course goal, design a vehicle (SAE Baja and Formula) Half lecture half project work Group and individual work, integrated Design - optimal solution subject
More information30 Years of Innovation
C-BV6 Ball Valves 30 Years of Innovation OMB is a family owned and managed business founded by Mr. Roberto Brevi in 1973. His goal was to build a company that would specialize in the manufacturing of forged
More informationWe are world-leading. innovators in oil-free OEM vacuum pumps & compressors. gseint.com
We are world-leading innovators in oil-free OEM vacuum pumps & compressors. gseint.com Your world-class OEM partner GSE is one of the world s leading manufacturers of oil-free OEM vacuum pumps and compressors.
More informationBUSHINGS AND ACCESSORIES FOR DISTRIBUTION AND POWER TRANSFORMERS
BUSHINGS AND ACCESSORIES FOR DISTRIBUTION AND POWER TRANSFORMERS COMPANY PROFILE Founded by the Giorgi family in 1967, CEDASPE has been manufacturing bushings and accessories for distribution and power
More informationPrime-Time Specialty Vehicles Company Introduction
Prime-Time Specialty Vehicles Company Introduction Mission Statement We strive to deliver more than we promise and always listen to our customer's needs. The staff at Prime-Time Specialty Vehicles daily
More informationSFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 *
SFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 * PRODUCT: Replacement Flywheels and Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum
More informationPark Avenue DETAILS. IP67 EPA: 1.8 FT 2 Weight: 45 lbs - 20 kg
Park Avenue Park Avenue DETAILS The PARK AVENUE Series, with its mid-century modern styling, is designed to disperse a vast amount of light while maintaining a timless look. The PARK AVENUE is Intended
More informationBASF s Performance Polymers Delivering sustainable value
BASF s Delivering sustainable value Wolfgang Hapke President Performance Polymers Division September 5, 2012 A strategic fit for BASF BASF Group sales 2011 Oil & Gas 16% Other 9% Chemicals 18% Agricultural
More informationL45SR - L75SR - L120SR
L45SR - L75SR - L120SR Speed Regulated Rotary Screw Compressors Intelligent Air Technology DRIVES Speed Regulated Rotary Screw Compressors Reliable compressed air provided at maximum efficiency under all
More informationLAMDA COMPONENTS PVT LTD
Introduction Name of the Company : Lamda Components (P) Ltd. In Operation Since (year) : 987 Major Customers : BOSCH Ltd, Mahindra &Mahindra, Kirloskar Toyota Textile Machinery Delphi TVS Diesel Systems
More informationCompany Presentation
102 SECTOR-24 FARIDABAD HARYANA INDIA 121005 PHONE NUMBER : +91-1294021559/4021560 EMAIL : info@mitaso.com WEBSITE : www.mitaso.com Company Presentation About the Company Mitaso Appliances Limited, part
More informationRemote Site Power. RedHawk Energy Systems, LLC Palmer Rd., S.W. Pataskala, OH Ph: Fx:
Remote Site Power RedHawk Energy Systems, LLC 10340 Palmer Rd., S.W. Pataskala, OH 43062 RSPSP-3-12 Copyright 2012 All Rights Reserved RedHawk Energy Systems, LLC Ph: 740-964-4000 Fx: 740-927-6017 www.redhawkenergy.net
More informationHonda Clarity Fuel Cell HyLAW National Workshop, Budapest, 27. September 2018
Honda Clarity Fuel Cell HyLAW National Workshop, Budapest, 27. September 2018 Thomas Brachmann Technical Leader New Energy and Fuel Cell Chief Project Engineer Section Leader Automobile Powertrain Research
More informationBrakes, Clutches & SINPAC SolidState Switches
Product Line Overview Effective Date: 9/13/2018 Brakes, Clutches & SINPAC SolidState Switches About Us Stearns Brakes Set the Standard for Excellence Our Value To You Stearns is the market leader in providing
More informationNISSAN FROM GREEN FIELDS TO GREEN CARS. SMMT/ MAKE it Sunderland. Stadium of Light, Sunderland tbc 1 April 2014
NISSAN FROM GREEN FIELDS TO GREEN CARS SMMT/ MAKE it Sunderland Stadium of Light, Sunderland tbc 1 April 2014 1 AGENDA 1 Sunderland Plant - Growth 2 Nissan UK operations 3 Mid Term Plan Power 88 4 Innovation
More informationJ.N. ROBOTIC AUTOMATION PVT. LTD. Company Presentation
Deepak Sanwal J.N. ROBOTIC AUTOMATION PVT. LTD. Company Presentation JN ROBOTICS July 6, 2017 Slide 1 Company Introduction History & Milestones Constituted in the year 1998 Total employees: 60 approx.
More information4 64c hit. Wm % 41/7/4$1 The undersigned has the honour to r epor t. Mr. Mr. Approved and ordered this 18th day of August, A.D
1917. Approved and ordered this 18th day of August, A.D. 19 58. At the Executive Council Chamber, Victoria, enatu-governor. PRESENT: t i The Honourable W. Bennett Mr. Chant Mr. Peterson Mr. Westwood Mr.
More informationNous sommes heureux de vous annoncer l'arrivée du nouveau kit piste 1/8 de chez XRAY : la RX8'18
2018 XRAY RX8 2018 1/8 On-Road Nitro Car KIT 340006 Nous sommes heureux de vous annoncer l'arrivée du nouveau kit piste 1/8 de chez XRAY : la RX8'18 Marque :TEAM X RAY Référence :340006 Prix :694.00 Descriptif
More informationLEAP-X Program Update
LEAP-X Program Update 29 Oct 09 NYC CFM International Proprietary Information The information in this document is CFM Proprietary Information and is disclosed in confidence. It is the property of CFM International
More informationSALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS
SALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS Relay Test Bench: LIST OF TEST EQUIPMENT 1. FIVE STATION BIMETAL OVERLOAD RELAY TEST BENCH 2. TWENTY FOUR STATION RELAY HEATING
More informationG.W. Lisk Company, Inc. Solenoids Controls for Industrial or Mobile Hydraulic Applications
PRECISION CONTROL Solenoids Controls for Industrial or Mobile Hydraulic Applications LISK SOLENOIDS FOR YOUR INDUSTRIAL, MOBILE, AND PROPORTIONAL APPLICATIONS. WET PIN SOLENOIDS Wet pin solenoids are designed
More informationExperience the Heri Difference
Experience the Heri Difference Thinking Green Heri Automotive is committed to bringing our industry into 21st century environmental practices. By continuing to seek out and deploy environmentally friendly
More informationPower-GEN Middle East
Power-GEN Middle East High efficiency gas turbine testing & validation Marcus H. Scholz Abu Dhabi, UAE 12-14, October 2014 GE Power & Water 2014, General Electric Company. GE Proprietary Information -
More informationIIDZKA SEISAKUSYO CO., LTD. Company Profile IIDZKA SEISAKUSHO CO., LTD. 1
IIDZKA SEISAKUSYO CO., LTD. Company Profile IIDZKA SEISAKUSHO CO., LTD. 1 Business outline Name Line of business Headquarters Foundation Established Capital IIDZKA SEISKUSHO CO.,LTD. Development and manufacturing
More informationACE Group. Automotive Wheel Manufacturer & Powder Coating
Automotive Wheel Manufacturer & Powder Coating ROBOTS (2) Motoman Mod. SK120 Robotic Wheel Loader for Machine Cells, Wheel Grippers up to 22 Wheels, Yasnac MRC Controllers. 4th AXIS TWIN TURRET CNC WHEEL
More informationDomia DETAILS CY55P1A CY55T4 IP67
Domia Domia DETAILS The Domia offers smooth curves and a timeless shape blends easily into any environment. With a flat lens design, the DOMIA family enhances any project while offering high performance
More informationPLUS+1 Ecosystem for embedded system innovation
PLUS+1 Ecosystem for embedded system innovation 1 Danfoss Power Solutions overview, March 2016 Danfoss at a glance Key facts Danfoss Growth Themes Factories (in 20 countries) 61 North America 12 factories
More informationBOCA. Ingrade Low Voltage Lighting Products
BOCA Ingrade Low Voltage Lighting Products 1 BOCA 631 BOCA 631 4 Diameter Ingrade Drive Over 12V MR16 50W max. Temperature Reduction / Cool Lens Technology Recessed Mounting Optional Integral Transformer
More information82P SERIES 52F SERIES 52R SERIES. CAD FILES AVAILABLE ONLINE
82P SERIES 52F SERIES DE-STA-CO PNEUMATIC PIN CLAMPS SEPTEMBER 2007 52R SERIES www.destaco.com CAD FILES AVAILABLE ONLINE DE-STA-CO Locating Pin Clamps AT A GLANCE Specifications and Table of Contents
More informationCity-wide LED Street Light Conversion Program
City-wide LED Street Light Conversion Program Arts & Innovation Board of Public Utilities July 25, 2016 Project Description Utility 2.0 Multi-phase implementation of city-wide street light conversion program
More informationSealed Lead Acid Battery STANDBY APPLICATIONS. Premium Brand of Flying Power Group. Certified by
Sealed Lead Acid Battery STANDBY APPLICATIONS Premium Brand of Flying Power Group Certified by New factory picture - completed by 2016, covering 300,000 m 2 COMPANY PROFILE Genergy Battery Co. Limited
More informationBallard Power Systems
Ballard Power Systems Ballard Power Systems Fuel Cells Current Status and Prospects for the Future David Musil, P. Eng. Project Engineer, Advanced Automotive Development March 30, 2006 Outline 1. Background
More information2015 Pure Stock/UCAR Rules
2015 Pure Stock/UCAR Rules As of 23 MAY 2015 RULE BOOK DISCLAIMER: The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum
More informationSAFETY ON EVERY CURVE
SAFETY ON EVERY CURVE STEERING AHEAD The Mission of the Willi Elbe Group 2 Comprehensive development expertise, constantly up-to-date operational management, and state-of-the-art production. Discover here
More informationLola B07/90 Sports 2000 Product Information
Product Information Product Information 2 The Once and Future Winner The all-new is Lola s first design for a category it helped create and came to dominate in over a decade. The recent revitalisation
More informationSIMOTICS GP Frame sizes 80 and 90
Siemens AG 1 SIMOTICS GP General Purpose Motors - Frame sizes 8 and 9 Outstanding reliability made in Germany www.siemens.com/simotics-gp Brochure Edition January 1 Answers for industry. Siemens AG 1 SIMOTICS
More informationhttp://www.kosmek.co.jp FOR PRESS MACHINES Company Profile K OS ME K LTD. H ea d O f f i ce Company Name KOS ME K L T D. Established Ma y 1 9 8 6 Capital 99,000,000 Sales 6 0 b i l l i o
More informationThis section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque.
Torque Calibration Introduction This section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque. Torque calibration equipment is used for the testing, calibration
More informationHaitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
More informationLaboratory Vacuum Systems
Laboratory Vacuum Systems Product Selection Guide Vacuum systems customized specifically for Laboratory Applications Packages that leverage proven Dry Claw and Oil Sealed Rotary Vane Technologies Easy
More informationVision-OETMPremium Remanufactured Steering Products
Vision-OETMPremium Remanufactured Steering Products Rack and Pinion Power Steering Pumps Steering Gears Vista-Pro AUTOMOTIVE, LLC TM C Remanufactured using an OE-engineered process All parts are inspected.
More informationOil & Gas. Engineering Machinery
. With combined more than 50 years of experience, BOPM has the ability to produce spur, helical, and bevel gears that will conform to your every specification and deliver the performance your application
More informationThe SGT5-8000H proven in commercial operation
www.siemens.com/energy The SGT5-8000H proven in commercial operation Answers for energy. 2 375 MW Output of the Siemens Gas Turbine SGT5-8000H.* * Gross: ISO ambient conditions 375 MW Rated output of 375
More informationMotors and Gearboxes for Material Handling. Innovative Energy efficient Reliable
Motors and Gearboxes for Material Handling Innovative Energy efficient Reliable Reliability In All Areas ABM Greiffenberger develops and manufactures cutting edge drive solutions in highest quality. Individual
More informationP.O. BOX 246 Franksville, WI USA Ph Fax
08 34 16/NOS BuyLine 8749 The control panels are wired to receive 240 1-phase or 208/240/480 3-phase system voltages. Features include push button controls, an automatic starter and thermal disconnect
More informationIRBT 2005: Medium Track Platform Overview
ABB Robotics, November 2015 IRBT 2005: Medium Track Platform Overview Slide 1 IRBT 2005 Agenda Overview Differentiated Value Proposition Targeted Applications Customer Benefits Design Options Technical
More informationGE Marine. Seaworthy power. GE s new L250 inline diesel engine. imagination at work
GE Marine Seaworthy power GE s new L250 inline diesel engine imagination at work GE s L250 Built by one of the world s largest manufacturers of medium-speed diesel engines Designed to save fuel and meet
More informationFor Missions Accomplished. Whatever the missions, whatever the times, wherever the places, we ll get you where you re going.
For Missions Accomplished Whatever the missions, whatever the times, wherever the places, we ll get you where you re going. A Swiss Made Helicopter Kopter Group was founded for the purpose of developing,
More informationHYDRAULIC ACCUMULATORS SERVI FLUID POWER, INC. GLOBAL RESOURCE FOR HYDRAULIC ACCUMULATORS
HYDRAULIC ACCUMULATORS SERVI FLUID POWER, INC. GLOBAL RESOURCE FOR HYDRAULIC ACCUMULATORS OVERVIEW Servi Fluid Power Inc. Servi Fluid Power, Inc. was formed in 2014 to provide the design, assembly and
More informationService Bulletin TECHNICAL
Service Bulletin File in Section: 07 - Transmission/Transaxle Bulletin No.: 09-07-30-004J Date: February, 2014 TECHNICAL Subject: Slips in Reverse or Third, Delayed Reverse or Drive Engagement, DTC P0776,
More informationThe wind is outside. Fluitecnik is inside. Hydraulic and Cooling Systems
The wind is outside. Fluitecnik is inside. Hydraulic and Cooling Systems FLUITECNIK was created in 1991, and has a large international presence in the field of renewable energies. Currently, we have over
More information2018 UCAR Rules. May 14, 2018
2018 UCAR Rules May 14, 2018 RULE BOOK DISCLAIMER: The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements
More informationMANITOWOC TOOL AND MANUFACTURING, LLC
MANITOWOC TOOL AND MANUFACTURING, LLC World-class performance that makes a world of difference. ISO 9001 Registered FACILITY LIST 4330 Expo Drive Manitowoc, WI 54220 Phone: (920) 686-8232 Fax: (920) 686-8237
More informationCBU Demil Line Development GD-OTS and EBV EEC
CBU Demil Line Development GD-OTS and EBV EEC David Grymonpré, Ph.D. Mark Zaugg Demil Engineer Demil Specialist 727-578-8363 417-624-0212 dgrymonpre@gd-ots.com mark.zaugg@ebveec.com Outline of Presentation
More informationLow voltage bushings for pad-mounted distribution transformers Technical information guide
Transformer components Low voltage bushings for pad-mounted distribution transformers Technical information guide ABB low voltage bushings terminate a transformer s internal low voltage leads at the tank
More informationGEARMOTOR DIVISION. Designed for reliability. Built for endurance.
GEARMOTOR DIVISION GLOBAL REACH AND RESOURCES POWERED BY MORE THAN 50 YEARS OF GEAR MANUFACTURING EXPERTISE PRODUCTS AND SERVICES TO CUSTOMERS AROUND THE WORLD IN 40 COUNTRIES LEADER IN DESIGN & INNOVATION
More informationTorin Spring Coilers
sales@fenn-torin.com +1 860.259.6600 Torin Spring Coilers Many Springs, One Machine Coilers available for wire diameter ranging.003 -.750 Compression Extension Torsion Belting Wire Forms Magazine Rings
More informationBİZMAK AUTOMATION MACHINE INDUSTRY MEASUREMENT CENTER TİC.LTD.ŞTİ.
BİZMAK AUTOMATION MACHINE INDUSTRY MEASUREMENT CENTER TİC.LTD.ŞTİ. 1 COMPANY PROFILE AND BUSINESS LINE COMPANY PROFILE Foundation Year : January 2014 Location : 4.Industry IZMİR / TURKEY Company Type :
More informationNORCO INDUSTRIES COMPANY OVERVIEW
NORCO INDUSTRIES COMPANY OVERVIEW BRIEF HISTORY Norco Industries is a privately owned 390,000 square foot manufacturing facility located in Elkhart, IN. Our Elkhart facility has experienced continued growth
More informationCompany Profile.
Company Profile DHTech Corp. DHTech Corp. http://www.dhtechkorea.com E-mail : dhtech@dhtechkorea.com General Information Foundation : July 10, 1996 CEO : TaeGyu Han Headquarters : 38, Technosunhwan-ro
More informationIIDZKA SEISAKUSYO CO., LTD. Company Profile IIDZKA SEISAKUSHO CO., LTD. 1
IIDZKA SEISAKUSYO CO., LTD. Company Profile IIDZKA SEISAKUSHO CO., LTD. 1 Business outline Name President Headquarters Line of business Foundation Established Capital IIDZKA SEISKUSHO CO.,LTD. Yasushi
More informationThe Only World Best Company
Korea Mexico The Only World Best Company Introduction History Profile Main & Branch Organization Soft-ware Machinery Processing Mold Processing CAE Product & Certificate Samples by Mold Certificate & Patent
More informationCOmpOnEntS. Components WOrldWidE
the EnGinE people EnGinE Engine COmpOnEntS Components WOrldWidE Worldwide quality Made in GerMany With more than 50 years of experience, SECO has an exceptional long tradition in the manufacturing of large
More informationWELCOME ZEBRA AUTO CHEM PVT. LTD. PLOT NO. 6A,GUT NO 378, PUNE ROAD,WALUJ, AURANGABAD
WELCOME ZEBRA AUTO CHEM PVT. LTD. PLOT NO. 6A,GUT NO 378, PUNE ROAD,WALUJ, AURANGABAD-431136. 1 ISO 9001-2008 2 Company History We, Group of Company Started our first company by name Zebra ForexPvt. Ltd
More information