Baureihen Series Séries U65H2

Transcription

1 Baureihen Series Séries U65H2 ISO 9001 CERTIFICATED Miniatur Radial Gebläse Miniature Radial Blower Ventilateur miniature radial U65H2-024KX-6 18VDC. Steckerbelegung / connector pin assignment Pin 1 Hall sensor 1* blue AWG24 Pin 2 Hall sensor 2* black AWG24 Pin 3 Vhal VDC yellow AWG24 Pin 4 winding 3 orange AWG24 Pin 5 Hall sensor 3* grey AWG24 Pin 6 GND green AWG24 Pin 7 winding 1 brown AWG24 Pin 8 winding 2 red AWG24 * internal Pull-up (7 13 kohm) to Pin 3 Z A4 U65H U65H2 MICRONEL AG Tel. +41-(0) CH-8307 Tagelswangen Fax +41-(0)

2 Technische Daten Technical data Caractéristiques techniques elektronisch kommutierter (mit Hallsensoren) ohne integrierte Elektronik (externe Elektronik nötig). Standardluftdichte 1.2kg/m 3 Brushless electronically 3-Phasen commutated motor motor (with hall (with sensors) hall sensors) without without integrated integrated motor motor controller (external driver required) Standard air density 1.2kg/m 3 Standard air density 1.2kg/m 3 Moteur moteur à commutation électronique (avec hall sensor) sans électronique intégré (électronique externe indispensable) Densité de l'air standard 1,2 kg/m 3 U65H2-024KX-6 U N V U V I N freeblowing ma 2264 I N work. point ma 1603 I N static ma 788 I block A 5 L inductance mh 0.01 R phase-phase Ohm 0.18 P N work. point W n freeblowing min n work. point min n static min V freeblowing V work. point l/min l/min p work. point Pa 6245 p static Pa 7303 LpA (WP) MTTF (WP) T m db(a) hr C/ F gr/oz depend on working point 15'000 / 25 C (77 F) / / 9.52 Leads mm/inch 300 /11.8 (AWG24) / Connector Molex Microfit Housing Material NTC Ball Bearing Tacho PC / Impeller PA6 optional on request Specifications are subject to change without notice. Specifications on this Datasheet are for reference. Datas of Blower were measured with controll board H015X-522A9 MICRONEL AG Tel. +41-(0) CH-8307 Tagelswangen Fax +41-(0)

3 Blower limits short time use continous Work point Speed n [min-1] Temperature on heat shink [ C] Input Power [W] Power continous [W] Do not use the blower free blowing minimum Flow of 50 l/min. is necessary 45'000 max. 85 max. 75 max. 25 If the blower is used in medical field it is necessary to use an NTC sensor Dynamic use of the blower must be discussed with Micronel MICRONEL AG Tel. +41-(0) CH-8307 Tagelswangen Fax +41-(0)

4 Baureihen Series Séries U65M2 Miniatur Radial Gebläse Miniature Radial Blower Ventilateur miniature radial SN EN ISO CERTIFICATED U65M2-024KX-5 18VDC static pressure delta p [Pa] V DC 24VDC 18VDC not allowed! U65M volume flow V [lt/min.] Z A4 U65MX 2709 Steckerbelegung / connector pin assignment Pin 1 Hall sensor 1 blue AWG24 Pin 2 Hall sensor 2 black AWG24 Pin 3 Vhal VDC yellow AWG24 Pin 4 winding 3 orange AWG18 Pin 5 Hall sensor 3 grey AWG24 Pin 6 GND green AWG24 Pin 7 winding 1 brown AWG18 Pin 8 winding 2 red AWG18 MICRONEL AG CH-8307 Tagelswangen Tel. +41-(0) Fax +41-(0)

5 Technische Daten Technical data Caractéristiques techniques elektronisch kommutierter (mit Hallsensoren) ohne integrierte Elektronik (externe Elektronik nötig). Standardluftdichte 1.2kg/m 3 electronically commutated motor (with hall sensors) without integrated motor controller (external driver required) Standard air density 1.2kg/m 3 Moteur moteur à commutation électronique (avec hall sensor) sans electronique intégré (électronique externe indispensable) Densité de l'air standard 1,2 kg/m 3 U65M2-024KX-5 U N V 18 U V I N freeblowing ma I N work. point ma I N static ma I block A 5 P N work. point W 35 n freeblowing min n work. point min n static min Q freeblowing l/min 324 Q work. point l/min 217 p work. point Pa p static Pa LpA (WP) db(a) 47.5 db(a) at 1000 Pa (10 mbar) and 1m distance MTTF (WP) hr / 25 C T C / F / m gr / oz 290 / 9.32 Leads mm / inch 300 / 11.8 (AWG24/18) / Connector Molex Minifit Housing material PC / Impeller PA6 Sleeve bearing N/A N/A Specifications are subject to change without notice. Specifications on this Datasheet are for reference. Ball bearing Tacho Datas of Blower were measured with control board H015X-522A9 MICRONEL AG CH-8307 Tagelswangen Tel. +41-(0) Fax +41-(0)

6 Technische Daten Technical data Caractéristiques techniques Blower limits short time use Speed n [min-1] Temperature on heat sink [ C] Input Power [W] 45'000 max. 85 max. 75 max. continous Power continous [W] 25 Work point Do not use the blower free blowing minimum Flow of 50 l/min. is necessary MICRONEL AG CH-8307 Tagelswangen Tel. +41-(0) Fax +41-(0)