FILTER PRESS DRACO, FILTER PRESS. Draco offers maximum dewatering and dry solids production.

Transcription

1 FILTER PRESS Draco offers maximum dewatering and dry solids production. Capable of operating in fully automatic, FPA, semi-automatic, FPSA, or completely in manual mode, FPM. Draco offers a range of efficient, high performance equipment for special applications. DRACO, FILTER PRESS

2 Process Description Filter press operation: 1-Close filter press 2-Loaded 3-Filtration 4-Openend and cake discharge Advantages and Applications: Maximum dewatering and dry solids production. Large filtration area in a short space. Automatic control system. Low chemical consumption. After-sales technical assistance. Process flexibility-easily accommodates fluctuating inlet consistency. User friendly-simple, safe & reliable operation. Chemical industry. Mining industry. Industrial wastewater. Municipal wastewater. Special applications. Filter fabrics and plates: The filter press have incorporated the filter cloth more appropiated for each application, in order to obtain the maximum performance. Filter fabrics types Special fabrics for aggregate treatment Fabrics for sealed plates Non-drip fabrics - Standard fabrics. - Non-drip fabrics. - Fabrics for sealed plates. - Special fabrics for aggregate treatment. - Fabrics for other specific treatments.

3 Optional Draco Test Equipment: Toro Equipment manufactures the Draco testing/pilot units. These units enable the testing and subsequent analysis for specific applications. Compact Draco Unit: Advantages of the Compact Draco unit: Rapid installation. Easy transportation. Minimal footprint required. Minimal operational costs. Minimal visual impact. Containerization: - 20ft container. - 40ft container. - Insulated containers. Optional: Electrical control panel. Sludge conditioner tank (TAF). Polyelectrolyte dosing hopper (TDC). Lifting structure. SCADA. Washing system. Hydraulic ram protection. Conveyor belt. Electrical Control Panel Cake collection support. Maniflow available in stainless steel, polypropylene and special designs. Mobil filter press FPA 120/115 Protective wooden crate Conveyor belt SCADA TAF & TDC

4 High Performance FPA Technical Specifications (Closed Construction) MODEL Maximum number of plates Maximum length mm (A) Maximum width mm (B) Maximum height mm (C) Maximum filter surface (m 2 ) Maximum filtered volume (l) FPA-AR Pump Type: Cylinder of 23 cm 3 Tank volume (l): 150 Power: 7,5 Kw FPA-AR Pump Type: Cylinder of 23 cm 3 Tank volume (l): 150 Power: 7,5 Kw Frame: Material ST-52/AISI-304, Finish: Epoxy Paint Operation: Automatic Options: - Drip tray. - Automatic cleaning system. - Installation of walkways and roofs. - Cake conveyor. - Sludge collection hopper. (Drip tray)

5 DRACO FPA-AR

6 FPA Specifications (Open Construction) MODEL Number of plates Number of chambers Length mm (A) Width mm (B) Height mm (C) Weight empty (Kg) Weight loaded (Kg) Total filter area (m 2 ) FP total cake volume (l) Plates and fabric size FPA 47/ , , , , , , Pump flow (l/m): 7,5 Tank volume (l): 39 Power: 3 Kw Calculated for cake thickness: 30 mm FPA 63/ , , , , , , Double pump flow (l/m): 12+4 Tank volume (l): 58 Power: 2,2 Kw Calculated for cake thickness: 32 mm FPA 80/ , , , , Double pump flow (l/m): 12+4 Tank volume (l): 75 Power: 2,2 Kw Calculated for cake thickness: 32 mm FPA 100/ , , , Double pump flow (l/m): 33+5 Tank volume (l): 100 Power: 4 Kw Calculated for cake thickness: 32 mm FPA 120/ , , , Double pump flow (l/m): 33+5 Tank volume (l): 100 Power: 4 Kw Calculated for cake thickness: 32 mm Frame: Material ST-52/AISI-304, Finish: Epoxy Paint Operation: Automatic NOTE: (1) The FPA is supplied with: - Side protection plates. - Filtered water collection channel and handles. - Compressed air socket. - Equipped with cake-blowing circuit. - Emergency stop cable. - Hydraulic oil included. (2) Compressor not included. (3) The dimensions and specifications may vary slightly due to the normal development of products by the engineering department or Toro Equipment SL. When ordering request the specifications sheet at

7 DRACO FPA 80-25

8 FPSA Specifications (Open Construction) MODEL Number of plates Number of chambers Length mm (A) Width mm (B) Height mm (C) Weight empty (Kg) Weight loaded (kg) Total filter area (m 2 ) FP total cake volume (l) Plates and fabric size FPSA 47/ , , , , , , , , , , , , Pump flow (l/m): 2,46 Tank volume (l): 8 Power: 1,1 Kw Calculated for cake thickness: 30 mm FPSA 63/ , , , , , , , , , , , , Pump flow (l/m): 2,46 Tank volume (l): 8 Power: 1,1 Kw Calculated for cake thickness: 32 mm FPSA 80/ , , , , , , , , , , , Pump flow (l/m): 7,25 Tank volume (l): 14 Power: 3 Kw Calculated for cake thickness: 32 mm Frame: Material ST-52/AISI-304, Finish: Epoxy Paint Operation: Joystick. NOTE: (1) The FPSA is supplied with: - Side protection plates. - Filtered water collection channel and handles. - Compressed air socket. - Equipped with circuit-blowing cakes. - Hydraulic oil included. (2) Compressor not included. (3) The dimensions and specifications may vary slightly due to the normal development of products by the engineering department or Toro Equipment SL. When ordering request the specifications sheet at

9 DRACO FPSA 63-35

10 FPM Specifications (Open Construction) MODEL Number of plates Number of chambers Length mm (A) Width mm (B) Height mm (C) Weight empty (Kg) Weight loaded (kg) Total filter area (m 2 ) FP total cake volume (l) Plates and fabric size FPM 47/ , , , , , , , , , , , , Pump flow (cm 3 /cycle):25 Tank volume (l): 5 Calculated for cake thickness: 30 mm FPM 63/ , , , , , , , , , , , , Pump flow (cm 3 /cycle):25 Tank volume (l): 5 Calculated for cake thickness: 32 mm FPM 80/ , , , , , , , , , , , Pump flow (cm 3 /cycle):25 Tank volume (l): 15 Calculated for cake thickness: 32 mm Farme: Material ST-52/AISI-304, Finish: Epoxy Paint Operation: Handle lever NOTE: (1) The FPM is supplied with side shields. (2) The FPM is supplied with filtrate collection channel and handles. (3) The dimensions and specifications may vary slightly due to the normal development of products by the engineering department or Toro Equipment SL. When ordering request the specifications sheet at

11 DRACO FPM 47-10

12 Worldwide Presence Argentina Belgium Brazil Bulgaria Canada Chile Croatia Egypt Estonia France Germany Greece Holland Hungary India Jordan Latvia Mexico Morocco Pakistan Poland Portugal Romania Russia Saudi Arabia Spain Tunisia UAE Ukraine United Kingdom Venezuela TORO EQUIPMENT S.L. C/ Sauce s/n La Cisterniga Valladolid-España Tel Fax TORO EQUIPMENT 2013 DRACO FILTER PRESS