FORM NO. PTZ-806 REV. 1 HEAT PUMPS

Transcription

1 FORM NO. PTZ-806 REV. 1 TZPLS-14 SERIES Efficiencies: 15 SEER/12.5 EER 9 HSPF Nominal Sizes 1 1 /2 to 5 Ton [5.28 to 17.6 kw] Cooling Capacities 17.3 to 60.5 kbtu [5.7 to 17.7 kw] Manufactured for Thermal Zone Philadelphia, PA 13.0 HEAT PUMPS Features New composite base pan dampens sound, eliminates corrosion and reduces number of fasteners needed Improved tubing design reduces vibration and stress, making unit quieter and reducing opportunity for leaks Optimized defrost characteristics - decrease defrosting and provide better home comfort Powder coat paint finish for a long lasting professional finish Optimized reversing valve sizing improves shifting performance for quieter unit operation and increased life of the system Enhanced mufflers help to dissipate vibration energy for quieter unit operation Copeland scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability Modern cabinet aesthetics increased curb appeal with visually appealing design Vertical louvre panels provide ultimate coil protection, enhances cabinet strength, and increases cabinet rigidity Optimized fan orifice optimizes airflow and reduces unit sound Rust resistant screws confirmed through 1500-hour salt spray testing 3" between valves, 4" below valves, 5" above valves provides a minimum working area of 27-square inches for easier access Integrated heat pump lift receptacle allows standard CPVC stands to be inserted into the base 15" wide, industry leading corner service access makes repairs easier and faster External gauge port access allows easy connection of low-loss gauge ports Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal Service trays hold fasteners or caps during service calls QR code provides technical information on demand for faster service calls Fan motor harness with extra-long wires allows unit top to be removed without disconnecting fan wire (IN CERTAIN MATCHED SYSTEMS)

2 Table of Contents TABLE OF CONTENTS Model Number Identification...3 Available SKUs...3 Physical Data...4 Electrical Data...4 Accessories...5 Unit Dimensions...6 Clearances...7 Wiring Diagrams...8 Application Guidelines...8 Refrigerant Line Size Information Performance Data Guide Specifications...18 Limited Warranty Thermal Zone

3 Model Number Identification/Available SKUs Heat Pumps TZ P L S A A Brand Product Category Refrigerant Motor SEER Capacity Voltage Region Minor Series Thermal Zone P = Heat Pump L = R410A S = Single Stage 14 = 14 SEER 18 = 18,000 BTU 24 = 24,000 BTU 30 = 30,000 BTU 36 = 36,000 BTU 42 = 42,000 BTU 48 = 48,000 BTU 60 = 60,000 BTU 2 = 1ph /60 C = 3ph /60 D = 3ph 460/60 A = All Regions F = Reverse Furnace Coil/PSH AHU Series A = First Design Series B = Second Design Series [ ] Designates Metric Conversions Available SKUs Available Models TZPLS14182AB TZPLS14242AA TZPLS14302AA TZPLS14362AA TZPLS14482AA TZPLS14602AB TZPLS14422FA* TZPLS1436CAA TZPLS1448CAA TZPLS1460CAB TZPLS1442CFA* TZPLS1436DAA TZPLS1448DAA TZPLS1460DAA *Unit available Q1/19 Thermal Zone 3

4 Physical Data/Electrical Data Physical Data Model No.# TZPLS1418 TZPLS1424 TZPLS1430 TZPLS1436 *TZPLS1442* TZPLS1448 TZPLS1460 Nominal Tonnage Valve Connections Liquid Line O.D. in. 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Suction Line O.D. in. 3/4 3/4 3/4 3/4 7/8 7/8 7/8 Refrigerant (R410A) furnished oz.¹ Compressor Type Scroll Outdoor Coil Net face area Outer Coil Net face area Inner Coil Tube diameter in. 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Number of rows Fins per inch Outdoor Fan Diameter in Number of blades Motor hp 1/8 1/8 1/8 1/6 1/5 1/5 1/5 CFM RPM watts Shipping weight lbs Operating weight lbs Electrical Data Line Voltage Data (Volts-Phase-Hz) 208/ / / / / / / Maximum overcurrent protection (amps)² Minimum circuit ampacity³ Compressor Rated load amps Locked rotor amps Condenser Fan Motor Full load amps Locked rotor amps Line Voltage Data (Volts-Phase-Hz) 208/ / / / Maximum overcurrent protection (amps)² Minimum circuit ampacity³ Compressor Rated load amps Locked rotor amps Condenser Fan Motor Full load amps Locked rotor amps Line Voltage Data (Volts-Phase-Hz) Maximum overcurrent protection (amps)² Minimum circuit ampacity³ 9 10 Compressor Rated load amps Locked rotor amps Condenser Fan Motor Full load amps Locked rotor amps ¹Refrigerant charge sufficient for 15 ft. length of refrigerant lines. For longer line set requirements see the installation instructions for information about set length and additional refrigerant charge required. ²HACR type circuit breaker of fuse. ³Refer to National Electrical Code manual to determine wire, fuse and disconnect size requirements. 4 Thermal Zone

5 Accessories Accessories Model No. TZPLS1418 TZPLS1424 TZPLS1430 TZPLS1436 TZPLS1442 TZPLS1448 TZPLS1460 Compressor crankcase heater Factory Standard Low ambient control RXAD-A08 RXAD-A08 RXAD-A08 RXAD-A08 RXAD-A08 RXAD-A08 RXAD-A08 Compressor sound cover Compressor hard start kit SK-A1 SK-A1 SK-A1 SK-A1 SK-A1 SK-A1 SK-A1 Low pressure control* Factory Standard Factory Standard Factory Standard Factory Standard Factory Standard Factory Standard Factory Standard High pressure control* Factory Standard Factory Standard Factory Standard Factory Standard Factory Standard Factory Standard Factory Standard Solenoid Valve 200RD2T3TVLC 200RD2T3TVLC 200RD2T3TVLC 200RD2T3TVLC 200RD2T3TVLC 200RD3T3TVLC 200RD3T3TVLC Liquid Line Solenoid (24 VAC, 50/60 Hz) Solenoid Coil 61-AMG24V 61-AMG24V 61-AMG24V 61-AMG24V 61-AMG24V 61-AMG24V 61-AMG24V Bi-flow kit* KS30387 KS30387 KS30387 KS30387 KS30387 KS30387 KS30387 Solenoid Valve 200RD2T3TVLC 200RD2T3TVLC 200RD2T3TVLC 200RD2T3TVLC 200RD2T3TVLC 200RD3T3TVLC 200RD3T3TVLC Liquid Line Solenoid (120/240 VAC, 50/60 Hz) Solenoid Coil 61-AMG120/240V 61-AMG120/240V 61-AMG120/240V 61-AMG120/240V 61-AMG120/240V 61-AMG120/240V 61-AMG120/240V Bi-flow kit* KS30387 KS30387 KS30387 KS30387 KS30387 KS30387 KS30387 Heat Pump Riser 6 inch *Bi-flow kits are required when installing a liquid line solenoid on a heat pump. Thermal Zone 5

6 Unit Dimensions Unit Dimensions OPERATING SHIPPING MODEL NUMBER H (Height) L (Length) W (Width) H (Height) L (Length) W (Width) INCHES mm INCHES mm INCHES mm INCHES mm INCHES mm INCHES mm TZPLS TZPLS TZPLS TZPLS *TZPLS1442* TZPLS TZPLS ALLOW OVER HANG CLEARNACE OF 60 [1524 mm] MIN. A I R W D I S C H A R G E L H AIR INLET GRILLE ALLOW 6 [152 mm] MIN. CLEARANCE ALL SIDE 12 [305 mm] RECOMMENDED SERVICE PANELS/ INLET CONNECTIONS / HIGH & LOW VOLTAGE ACCESS ALLOW 24 [610 mm] MIN. CLEARANCE [ ] Designates Metric Conversions ST-A Thermal Zone

7 Clearances WALL CLEARANCES WALL 6 (152.4) 24 (609.6) Service 12 (304.8) 6 (152.4) WALL 12 (304.8) 24 (609.6) Service 12 (304.8) 6 (152.4) 24 (609.6) Service 24 (609.6) Service 18 (457.2) 18 (457.2) NOTE: NUMBERS IN () = mm 18 (457.2) WALL 24 (609.6) Service ST-A IMPORTANT: When installing multiple units in an alcove, roof well or partially enclosed area, ensure there is adequate ventillation to prevent re-circulation of discharge air. Thermal Zone 7

8 Wiring Diagram/Application Guidelines Control Wiring FIGURE 4 CONTROL WIRING FOR AIR HANDLER Air Handler W2 G Y W1 B ODD C W/BL G/BK Y W/BK BL G/Y BR B Heat Pump Thermostat Y G W2 E C R TYPICAL THERMOSTAT: HEAT PUMP WITH ELECTRIC HEAT Heat Pump Outdoor Unit Y B C R D NOTES: 1. Jumper E to W2 to transfer control of supplemental heat to 1st stage when the emergency heat switch is on. 2. This wire turns on heat for defrost, omit for most economical operation. 3. Wire with colored tracing stripe. R R Y WIRING INFORMATION Line Voltage - Field Installed - Factory Standard NOTE: RED WIRE REQUIRED WITH RANCO DDL DEMAND DEFROST CONTROL. Application Guidelines 1. Intended for outdoor installation with free air inlet and outlet. Outdoor fan external static pressure available is less than in. wc. 2. Minimum outdoor operation air temperature for cooling mode without low-ambient operation accessory is 55 F (12.8 C). 3. Maximum outdoor operating air temperature is 125 F (51.7 C). 4. For reliable operation, unit should be level in all horizontal planes. 5. Use only copper wire for electric connections at unit. Aluminum and clad aluminum are not acceptable for the type of connector provided. 6. Do not apply capillary tube indoor coils to these units. 7. Factory supplied filter drier must be installed. 8 Thermal Zone

9 Refrigerant Line Size Information Table 2A: Refrigerant Line Sizing Chart (English Units) SEER Single-Stage Heat Pumps Unit Size Allowable Liquid Line Size Allowable Vapor Line Size Use Long Line Guidelines for Linear Line Lengths Greater Than Shown Below (Feet) (-)PLS14-A/B (-)PLS14-F/P (-)P15 Outdoor Unit ABOVE or BELOW Indoor Unit Equivalent Length (Feet) < Maximum Vertical Separation / Capacity Multiplier 1.5 Ton *SEE NOTE 3 2 Ton 2.5 Ton 3 Ton 3.5 Ton 1/4" 5/8" N/A N/A 25 / / / / / / 0.97 N/R N/R N/R N/R 5/16" 5/8" / / / / / / / / / / /8" 5/8" / / / / / / / / / / /4" *3/4"* N/A N/A 25 / / / / / / 0.99 N/R N/R N/R N/R 5/16" *3/4"* / / / / / / / / / / /8" *3/4"* / / / / / / / / / / /4" 5/8" N/A N/A 25 / / / 0.97 N/R N/R N/R N/R N/R N/R N/R 5/16" 5/8" / / / / / / / / / / /8" 5/8" / / / / / / / / / / /4" 3/4" N/A N/A 25 / / / 0.99 N/R N/R N/R N/R N/R N/R N/R 5/16" 3/4" / / / / / / / / / / /8" 3/4" / / / / / / / / / / /16" 5/8" / / / / / / / 0.90 N/R N/R N/R 3/8" 5/8" / / / / / / / 0.90 N/R N/R N/R 5/16" 3/4" / / / / / / / / / 0.95 N/R 3/8" 3/4" / / / / / / / / / / /16" 5/8" / / / / / 0.90 N/R N/R N/R N/R N/R 3/8" 5/8" / / / / / 0.90 N/R N/R N/R N/R N/R 5/16" 3/4" / / / / / / 0.96 N/R N/R N/R N/R 3/8" 3/4" / / / / / / / / / / /2" 3/4" / / / / / / / / / / /16" 7/8" / / / / / / 0.99 N/R N/R N/R N/R 3/8" 7/8" / / / / / / / / / / /2" 7/8" / / / / / / / / / / /8" 3/4" / / / / / / / / / 0.90 N/R 1/2" 3/4" / / / / / / / / / 0.90 N/R 3/8" 7/8" / / / / / / / / / / /2" 7/8" / / / / / / / / / / 0.96 NOTES: 1. Do not exceed 200 ft linear line length. 2. *Do not exceed 100 ft vertical separation if outdoor unit is above indoor unit. 3. **3/4" vapor line should only be used for 1.5 ton systems if outdoor unit is below or at same level as indoor to assure proper oil return. 4. Always use the smallest liquid line allowable to minimize refrigerant charge. 5. Applications shaded in light gray indicate capacity multipliers between 0.90 and 0.96 which are not recommended, but are allowed. 6. Applications shaded in dark gray are not recommended due to excessive liquid or suction pressure drop. Thermal Zone 9

10 Refrigerant Line Size Information Table 2A: Refrigerant Line Sizing Chart (English Units) (con t.) SEER Single-Stage Heat Pumps Unit Size Allowable Liquid Line Size Allowable Vapor Line Size Use Long Line Guidelines for Linear Line Lengths Greater Than Shown Below (Feet) (-)PLS14-A/B (-)PLS14-F/P (-)P15 Outdoor Unit ABOVE or BELOW Indoor Unit Equivalent Length (Feet) < Maximum Vertical Separation / Capacity Multiplier 4 Ton 5 Ton 3/8" 3/4" / / / / / / / 0.91 N/R N/R N/R 1/2" 3/4" / / / / / / / 0.91 N/R N/R N/R 3/8" 7/8" / / / / / / / / / / /2" 7/8" / / / / / / / / / / /8" 3/4" / / / / / 0.90 N/R N/R N/R N/R N/R 1/2" 3/4" / / / / / 0.90 N/R N/R N/R N/R N/R 3/8" 7/8" / / / / / / / 0.94 N/R N/R N/R 1/2" 7/8" / / / / / / / / / / /8" 1-1/8" / / / / / / / 0.99 N/R N/R N/R 1/2" 1-1/8" / / / / / / / / / / 0.98 NOTES: 1. Do not exceed 200 ft linear line length. 2. *Do not exceed 100 ft vertical separation if outdoor unit is above indoor unit. 3. **3/4" vapor line should only be used for 1.5 ton systems if outdoor unit is below or at same level as indoor to assure proper oil return. 4. Always use the smallest liquid line allowable to minimize refrigerant charge. 5. Applications shaded in light gray indicate capacity multipliers between 0.90 and 0.96 which are not recommended, but are allowed. 6. Applications shaded in dark gray are not recommended due to excessive liquid or suction pressure drop. 10 Thermal Zone

11 Refrigerant Line Size Information Table 2B: Refrigerant Line Sizing Chart (Metric Units) SEER Single-Stage Heat Pumps Unit Size Allowable Liquid Line Size mm [in.] Allowable Vapor Line Size mm [in] Use Long Line Guidelines for Linear Line Lengths Greater Than Shown Below (Meters) (-)PLS14-A/B (-)PLS14-F/P (-)P15 Outdoor Unit ABOVE or BELOW Indoor Unit Equivalent Length (Meters) < Maximum Vertical Separation / Capacity Multiplier 5.3 kw [1.5 Ton] *SEE NOTE kw [2 Ton] 8.8 kw [2.5 Ton] 10.6 kw [3 Ton] 12.3 kw [3.5 Ton] 6.35 [1/4] [5/8] N/A N/A 8 / / / / / / 0.97 N/R N/R N/R N/R 7.94 [5/16] [5/8] / / / / / / / / / / [3/8] [5/8] / / / / / / / / / / [1/4] *19.05 [3/4]* N/A N/A 8 / / / / / / 0.99 N/R N/R N/R N/R 7.94 [5/16] *19.05 [3/4]* / / / / / / / / / / [3/8] *19.05 [3/4]* / / / / / / / / / / [1/4] [5/8] N/A N/A 8 / / / 0.97 N/R N/R N/R N/R N/R N/R N/R 7.94 [5/16] [5/8] / / / / / / / / / / [3/8] [5/8] / / / / / / / / / / [1/4] [3/4] N/A N/A 8 / / / 0.99 N/R N/R N/R N/R N/R N/R N/R 7.94 [5/16] [3/4] / / / / / / / / / / [3/8] [3/4] / / / / / / / / / / [5/16] [5/8] / / / / / / / 0.90 N/R N/R N/R 9.53 [3/8] [5/8] / / / / / / / 0.90 N/R N/R N/R 7.94 [5/16] [3/4] / / / / / / / / / 0.95 N/R 9.53 [3/8] [3/4] / / / / / / / / / / [5/16] [5/8] / / / / / 0.90 N/R N/R N/R N/R N/R 9.53 [3/8] [5/8] / / / / / 0.90 N/R N/R N/R N/R N/R 7.94 [5/16] [3/4] / / / / / / 0.96 N/R N/R N/R N/R 9.53 [3/8] [3/4] / / / / / / / / / / [1/2] [3/4] / / / / / / / / / / [5/16] [7/8] / / / / / / 0.99 N/R N/R N/R N/R 9.53 [3/8] [7/8] / / / / / / / / / / [1/2] [7/8] / / / / / / / / / / [3/8] [3/4] / / / / / / / / / 0.90 N/R 12.7 [1/2] [3/4] / / / / / / / / / 0.90 N/R 9.53 [3/8] [7/8] / / / / / / / / / / [1/2] [7/8] / / / / / / / / / / 0.96 NOTES: 1. Do not exceed 61 meters linear line length. 2. *Do not exceed 30 meters vertical separation if outdoor unit is above indoor unit. 3. **19.05 mm [3/4 in.] suction line should only be used for 1.5 ton systems if outdoor unit is below or at same level as indoor to assure proper oil return. 4. Always use the smallest liquid line allowable to minimize refrigerant charge. 5. Applications shaded in light gray indicate capacity multipliers between 0.90 and 0.96 which are not recommended, but are allowed. 6. Applications shaded in dark gray are not recommended due to excessive liquid or suction pressure drop. Thermal Zone 11

12 Refrigerant Line Size Information Table 2B: Refrigerant Line Sizing Chart (Metric Units) (con t.) SEER Single-Stage Heat Pumps Unit Size Allowable Liquid Line Size mm [in.] Allowable Vapor Line Size mm [in] Use Long Line Guidelines for Linear Line Lengths Greater Than Shown Below (Meters) (-)PLS14-A/B (-)PLS14-F/P (-)P15 Outdoor Unit ABOVE or BELOW Indoor Unit Equivalent Length (Meters) < Maximum Vertical Separation / Capacity Multiplier 14.1 kw [4 Ton] 17.6 kw [5 Ton] 9.53 [3/8] [3/4] / / / / / / / 0.91 N/R N/R N/R 12.7 [1/2] [3/4] / / / / / / / 0.91 N/R N/R N/R 9.53 [3/8] [7/8] / / / / / / / / / / [1/2] [7/8] / / / / / / / / / / [3/8] [3/4] / / / / / 0.90 N/R N/R N/R N/R N/R 12.7 [1/2] [3/4] / / / / / 0.90 N/R N/R N/R N/R N/R 9.53 [3/8] [7/8] / / / / / / / 0.94 N/R N/R N/R 12.7 [1/2] [7/8] / / / / / / / / / / [3/8] [1-1/8] / / / / / / / 0.99 N/R N/R N/R 12.7 [1/2] [1-1/8] / / / / / / / / / / 0.98 NOTES: 1. Do not exceed 61 meters linear line length. 2. *Do not exceed 30 meters vertical separation if outdoor unit is above indoor unit. 3. **19.05 mm [3/4 in.] suction line should only be used for 1.5 ton systems if outdoor unit is below or at same level as indoor to assure proper oil return. 4. Always use the smallest liquid line allowable to minimize refrigerant charge. 5. Applications shaded in light gray indicate capacity multipliers between 0.90 and 0.96 which are not recommended, but are allowed. 6. Applications shaded in dark gray are not recommended due to excessive liquid or suction pressure drop. 12 Thermal Zone

13 Performance Data Performance AHRI Standard Conditions Heat Pump Note: Ratings contained in this document are subject to change. For up-to-date and expanded ratings, please visit the AHRI web site ( Single-Stage 80% AFUE Gas Furnace Ratings Outdoor Unit Furnace Indoor Coil Total Capacity Net Sensible Net Latent SEER EER Indoor CFM [L/s] 47 Degree Heating Capacity 47 Degree COP 17 Degree Heating Capacity TZ80MSX050A30 TCF2417STA [5.6] [4.3] 4300 [1.3] [293.8] [5.0] [3.0] TZPLS14182 TZ80DSX075B30 TCF2417STA [5.6] [4.3] 4400 [1.3] [305.5] [5.0] [3.0] TZPLS14242 TZ80MSX050A30 TCF2417STA [7.0] [5.1] 6400 [1.9] [387.8] [6.7] [3.7] TZ80MSX075B40 TCF3621STA [8.4] [6.4] 6900 [2.0] [481.8] [8.0] [4.9] TZ80MSX075C40 TCF3621STA [8.4] [6.4] 7000 [2.1] [481.8] [8.0] [4.8] TZPLS14302 TZ80DSX075C50 TCF3621STA [8.3] [6.3] 6900 [2.0] [458.3] [8.0] [4.8] TZ80MSX100C50 TCF3621STA [8.4] [6.4] 7000 [2.1] [481.8] [8.0] [4.8] TZ80DSX100C50 TCF3621STA [8.4] [6.4] 6900 [2.0] [458.3] [8.0] [4.8] TZ80MSX075B40 TCF3621STA [10.3] [7.5] 9400 [2.8] [540.5] [10.2] [6.6] TZPLS1436C TZ80MSX075C40 TCF3621STA [10.3] [7.5] 9400 [2.8] [552.3] [10.3] [6.6] TZ80DSX100C50 TCF3621STA [10.3] [7.5] 9400 [2.8] [552.3] [10.3] [6.6] TZ80MSX075B40 TCF3621STA [10.3] [7.5] 9400 [2.8] [540.5] [10.2] [6.6] TZPLS1436D TZ80MSX075C40 TCF3621STA [10.3] [7.5] 9400 [2.8] [552.3] [10.3] [6.6] TZ80DSX100C50 TCF3621STA [10.3] [7.5] 9400 [2.8] [552.3] [10.3] [6.6] TZ80MSX075B40 TCF3621STA [10.3] [7.5] 9400 [2.8] [540.5] [10.2] [6.6] TZPLS14362 TZ80MSX075C40 TCF3621STA [10.3] [7.5] 9400 [2.8] [552.3] [10.3] [6.6] TZ80DSX100C50 TCF3621STA [10.3] [7.5] 9400 [2.8] [552.3] [10.3] [6.6] TZ80DSX075B30 TCF4821STA [12.3] [8.7] [3.6] [634.5] [11.9] [7.7] TZ80MSX075B40 TCF4821STA [12.3] [8.7] [3.6] [599.3] [11.7] [7.5] TCF4821STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80MSX075C40 TCF4824STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TCF4821STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80DSX075C50 TCF4824STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZPLS1442CF* TCF4821STA [12.3] [8.7] [3.6] [658.0] [11.7] [7.5] TZ80MSX100C50 TCF4824STA [12.3] [8.7] [3.6] [658.0] [11.7] [7.5] TCF4821STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80DSX100C50 TCF4824STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80MSX125D50 TCF4824STA [12.3] [8.7] [3.6] [634.5] [11.7] [7.5] TZ80DSX125D50 TCF4824STA [12.3] [8.7] [3.6] [634.5] [11.7] [7.6] TZ80DSX075B30 TCF4821STA [12.3] [8.7] [3.6] [634.5] [11.9] [7.7] TZ80MSX075B40 TCF4821STA [12.3] [8.7] [3.6] [599.3] [11.7] [7.5] TZPLS14422F* TCF4821STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80MSX075C40 TCF4824STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] Degree COP Region IV HSPF [ ] Designates Metric Conversions Thermal Zone 13

14 Performance Data Performance AHRI Standard Conditions Heat Pump (con t.) Note: Ratings contained in this document are subject to change. For up-to-date and expanded ratings, please visit the AHRI web site ( Single-Stage 80% AFUE Gas Furnace Ratings Outdoor Unit Furnace Indoor Coil Total Capacity Net Sensible Net Latent SEER EER Indoor CFM [L/s] 47 Degree Heating Capacity 47 Degree COP 17 Degree Heating Capacity TCF4821STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80DSX075C50 TCF4824STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TCF4821STA [12.3] [8.7] [3.6] [658.0] [11.7] [7.5] TZ80MSX100C50 TCF4824STA [12.3] [8.7] [3.6] [658.0] [11.7] [7.5] TZPLS14422F* TCF4821STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80DSX100C50 TCF4824STA [12.2] [8.6] [3.5] [575.8] [11.6] [7.4] TZ80MSX125D50 TCF4824STA [12.3] [8.7] [3.6] [634.5] [11.7] [7.5] TZ80DSX125D50 TCF4824STA [12.3] [8.7] [3.6] [634.5] [11.7] [7.6] TCF4821STA [13.8] [9.8] [3.9] [646.3] [13.3] [8.6] TZPLS1448C TZ80MSX100C50 TCF4824STA [13.8] [9.8] [3.9] [646.3] [13.3] [8.6] TCF4821STA [13.8] [9.8] [3.9] [646.3] [13.3] [8.6] TZPLS1448D TZ80MSX100C50 TCF4824STA [13.8] [9.8] [3.9] [646.3] [13.3] [8.6] TCF4821STA [13.8] [9.8] [3.9] [646.3] [13.3] [8.6] TZPLS14482 TZ80MSX100C50 TCF4824STA [13.8] [9.8] [3.9] [646.3] [13.3] [8.6] TCF6024HTA [16.3] [11.4] [4.9] [775.5] [15.8] [10.0] TZ80MSX100C50 TCF6024STA [16.3] [11.4] [4.9] [775.5] [15.8] [10.0] TZPLS1460C TCF6024HTA [16.3] [11.6] [4.6] [822.5] [16.0] [10.2] TZ80MSX125D50 TCF6024STA [16.3] [11.6] [4.6] [822.5] [16.0] [10.2] TCF6024HTA [16.3] [11.4] [4.9] [775.5] [15.8] [10.0] TZ80MSX100C50 TCF6024STA [16.3] [11.4] [4.9] [775.5] [15.8] [10.0] TZPLS14602 TCF6024HTA [16.3] [11.6] [4.6] [822.5] [16.0] [10.2] TZ80MSX125D50 TCF6024STA [16.3] [11.6] [4.6] [822.5] [16.0] [10.2] Degree COP Region IV HSPF [ ] Designates Metric Conversions 14 Thermal Zone

15 Performance Data 96% AFUE 2-Stage Variable Speed Multipoise Gas Furnace Ratings Outdoor Unit Furnace Indoor Coil Total Capacity Net Sensible Net Latent SEER EER Indoor CFM [L/s] 47 Degree Heating Capacity 47 Degree COP 17 Degree Heating Capacity TZ96MDVA040B30 TCF2417STA [5.6] [4.3] 4300 [1.3] [305.5] [5.0] [3.0] TZPLS14182 TZ96MDVA060B30 TCF2417STA [5.6] [4.3] 4300 [1.3] [305.5] [5.0] [3.1] TZ96MDVA070B30 TCF2417STA [5.6] [4.3] 4300 [1.3] [305.5] [5.0] [3.0] TZPLS14242 TZ96MDVA040B30 TCF2417STA [7.0] [5.1] 6400 [1.9] [387.8] [6.7] [3.7] TZPLS14302 TZ96MDVA100C50 TCF3621STA [8.3] [6.3] 6800 [2.0] [446.5] [7.8] [4.7] TZPLS1436C TZ96MDVA100C50 TCF3621STA [10.1] [7.4] 9300 [2.7] [517.0] [10.0] [6.4] TZPLS1436D TZ96MDVA100C50 TCF3621STA [10.1] [7.4] 9300 [2.7] [517.0] [10.0] [6.4] TZPLS14362 TZ96MDVA100C50 TCF3621STA [10.1] [7.4] 9300 [2.7] [517.0] [10.0] [6.4] TZPLS1442CF* TZ96MDVA115D50 TCF4824STA [12.3] [8.7] [3.6] [681.5] [11.7] [7.6] TZPLS14422F* TZ96MDVA115D50 TCF4824STA [12.3] [8.7] [3.6] [681.5] [11.7] [7.6] Degree COP Region IV HMLPF [ ] Designates Metric Conversions Thermal Zone 15

16 Performance Data Performance AHRI Standard Conditions Heat Pump (con t.) Note: Ratings contained in this document are subject to change. For up-to-date and expanded ratings, please visit the AHRI web site ( Air Handler Ratings Outdoor Unit TZPLS14182 TZPLS14242 TZPLS14302 TZPLS1436C TZPLS1436D TZPLS14362 TZPLS1442CF* TZPLS14422F* Air Handler Total Capacity Net Sensible Net Latent SEER EER Indoor CFM [L/s] 47 Degree Heating Capacity 47 Degree COP 17 Degree Heating Capacity 17 Degree COP TZBHP [5.2] [4.0] 4000 [1.2] [282.0] [4.7] [2.7] RF1T2421MTAN [5.3] [4.1] 4100 [1.2] [293.8] [4.8] [2.8] TZHSLTST [5.3] [4.1] 4100 [1.2] [305.5] [4.6] [2.7] TZHSLVST [5.3] [4.1] 4100 [1.2] [305.5] [4.6] [2.7] TZBHP [7.1] [5.2] 6500 [1.9] [387.8] [6.3] [3.8] RF1T2421MTAN [7.0] [5.2] 6400 [1.9] [376.0] [6.4] [3.8] TZHSLTST [7.0] [5.1] 6400 [1.9] [387.8] [6.7] [3.7] TZHSLVST [7.0] [5.1] 6400 [1.9] [399.5] [6.7] [3.7] TZBHP [8.4] [6.4] 7000 [2.1] [458.3] [7.7] [4.7] RF1T3624MTAN [8.5] [6.4] 7000 [2.1] [470.0] [8.1] [4.9] TZHSLTST [8.4] [6.4] 7000 [2.1] [493.5] [8.0] [4.9] TZHSLVST [8.4] [6.4] 6900 [2.0] [481.8] [8.0] [4.8] TZBHP [10.2] [7.5] 9300 [2.7] [564.0] [10.2] [6.4] RF1T3624MTAN [10.1] [7.4] 9200 [2.7] [564.0] [10.7] [6.6] TZHSLTST [10.3] [7.6] 9400 [2.8] [564.0] [10.2] [6.8] TZHSLVST [10.3] [7.6] 9400 [2.8] [564.0] [10.2] [6.6] TZBHP [10.2] [7.5] 9300 [2.7] [564.0] [10.2] [6.4] RF1T3624MTAN [10.1] [7.4] 9200 [2.7] [564.0] [10.7] [6.6] TZHSLTST [10.3] [7.6] 9400 [2.8] [564.0] [10.2] [6.8] TZHSLVST [10.3] [7.6] 9400 [2.8] [564.0] [10.2] [6.6] TZBHP [10.2] [7.5] 9300 [2.7] [564.0] [10.2] [6.4] RF1T3624MTAN [10.1] [7.4] 9200 [2.7] [564.0] [10.7] [6.6] TZHSLTST [10.3] [7.6] 9400 [2.8] [564.0] [10.2] [6.8] TZHSLVST [10.3] [7.6] 9400 [2.8] [564.0] [10.2] [6.6] TZHSLPST [12.2] [8.6] [3.5] [658.0] [12.0] [7.9] TZHSLTST [12.5] [8.8] [3.6] [634.5] [11.7] [7.5] TZHSLTST [12.3] [8.7] [3.6] [728.5] [11.7] [7.6] TZHSLVST [12.3] [8.7] [3.6] [658.0] [11.7] [7.5] TZHSLPST [12.2] [8.6] [3.5] [658.0] [12.0] [7.9] TZHSLTST [12.5] [8.8] [3.6] [634.5] [11.7] [7.5] TZHSLTST [12.3] [8.7] [3.6] [728.5] [11.7] [7.6] TZHSLVST [12.3] [8.7] [3.6] [658.0] [11.7] [7.5] Region IV HSPF [ ] Designates Metric Conversions 16 Thermal Zone

17 Performance Data Performance AHRI Standard Conditions Heat Pump (con t.) Note: Ratings contained in this document are subject to change. For up-to-date and expanded ratings, please visit the AHRI web site ( Air Handler Ratings Outdoor Unit TZPLS1448C TZPLS1448D TZPLS14482 TZPLS1460C TZPLS1460D TZPLS14602 Air Handler Total Capacity Net Sensible Net Latent SEER EER Indoor CFM [L/s] 47 Degree Heating Capacity 47 Degree COP 17 Degree Heating Capacity 17 Degree COP TZHSLTST [14.1] [10.1] [4.0] [716.8] [13.5] [8.7] TZHSLTST [14.1] [10.1] [4.0] [728.5] [13.3] [8.7] TZHSLVST [13.8] [9.8] [3.9] [658.0] [13.2] [8.6] TZHSLVST [14.2] [10.2] [4.0] [763.8] [13.3] [8.7] TZHSLTST [14.1] [10.1] [4.0] [716.8] [13.5] [8.7] TZHSLTST [14.1] [10.1] [4.0] [728.5] [13.3] [8.7] TZHSLVST [13.8] [9.8] [3.9] [658.0] [13.2] [8.6] TZHSLVST [14.2] [10.2] [4.0] [763.8] [13.3] [8.7] TZHSLTST [14.1] [10.1] [4.0] [716.8] [13.5] [8.7] TZHSLTST [14.1] [10.1] [4.0] [728.5] [13.3] [8.7] TZHSLVST [13.8] [9.8] [3.9] [658.0] [13.2] [8.6] TZHSLVST [14.2] [10.2] [4.0] [763.8] [13.3] [8.7] TZHSLTST [16.6] [12.0] [4.6] [846.0] [16.0] [10.1] TZHSLVST [16.0] [11.5] [5.1] [752.0] [15.4] [9.7] TZHSLTST [16.6] [11.4] [5.2] [846.0] [16.7] [10.5] TZHSLVST [16.6] [11.4] [5.2] [846.0] [16.7] [10.5] TZHSLTST [16.6] [12.0] [4.6] [846.0] [16.0] [10.1] TZHSLVST [16.0] [11.5] [5.1] [752.0] [15.4] [9.7] Region IV HSPF [ ] Designates Metric Conversions Thermal Zone 17

18 Guide Specifications GUIDE SPECIFICATIONS General System Description Outdoor-mounted, air-cooled, split-system heat pump unit suitable for ground or rooftop installation. Unit consists of a hermetic compressor, composite basepan, an air-cooled coil, propellertype condenser fan, suction and liquid line service valve, and a control box. Unit will discharge supply air upward as shown on contract drawings. Unit will be used in a refrigeration circuit to match up to a coil unit. Quality Assurance Unit will be rated in accordance with the latest edition of AHRI Standard 210. Unit will be certified for capacity and efficiency, and listed in the latest AHRI directory. Unit construction will comply with latest edition of ANSI/ ASHRAE and with NEC. Unit will be constructed in accordance with UL standards and will carry the UL label of approval. Unit will have c-ul-us approval. Unit cabinet will be capable of withstanding ASTM B hr salt spray test. Air-cooled condenser coils will be leak tested at 150 psig and pressure tested at 550 psig. Unit constructed in ISO9001 approved facility. Delivery, Storage, and Handling Unit will be shipped as single package only and is stored and handled per unit manufacturer s recommendations. Warranty (for inclusion by specifying engineer) U.S. and Canada only. Products Equipment Factory assembled, single piece, air-cooled heat pump unit. Contained within the unit enclosure is all factory wiring, piping, controls, compressor, refrigerant charge R-410A, and special features required prior to field start-up. Unit Cabinet Unit cabinet will be constructed of galvanized steel, bonderized, and coated with a powder coat paint. All units constructed with louver coil protection and corner post. Louver can be removed by removing one fastener per louver panel. AIR-COOLED, SPLIT-SYSTEM HEAT PUMP TZPLS /2 TO 5 NOMINAL TONS Fans Condenser fan will be direct-drive propeller type, discharging air upward. Condenser fan motors will be totally enclosed, 1-phase type with class B insulation and permanently lubricated bearings. Shafts will be corrosion resistant. Fan blades will be statically and dynamically balanced. Condenser fan openings will be equipped with coated steel wire safety guards. Compressor Compressor will be hermetically sealed. Compressor will be mounted on rubber vibration isolators. Condenser Coil Condenser coil will be air cooled. Coil will be constructed of aluminum fins mechanically bonded to copper tubes. Refrigeration Components Refrigeration circuit components will include liquid-line shutoff valve with sweat connections, vapor-line shutoff valve with sweat connections, system charge of R-410A refrigerant, and compressor oil. Unit will be equipped with filter drier for R-410A refrigerant for field installation. Operating Characteristics The capacity of the unit will meet or exceed Btuh at a suction temperature of F/ C. The power consumption at full load will not exceed kw. Combination of the unit and the evaporator or fan coil unit will have a total net cooling capacity of Btuh or greater at conditions of CFM entering air temperature at the evaporator at F/ C wet bulb and F/ C dry bulb, and air entering the unit at F/ C. The system will have a SEER of Btuh/watt or greater at DOE conditions. Electrical Requirements Nominal unit electrical characteristics will be v, single phase, 60 hz. The unit will be capable of satisfactory operation within voltage limits of v to v. Nominal unit electrical characteristics will be v, three phase, 60 hz. The unit will be capable of satisfactory operation within voltage limits of v to v. Unit electrical power will be single point connection. Control circuit will be 24v. Special Features Refer to section of this literature identifying accessories and descriptions for specific features and available enhancements. 18 Thermal Zone

19 Limited Warranty GENERAL TERMS OF LIMITED WARRANTY* Thermal Zone will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty. *For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate. Parts...Ten (10) Years Thermal Zone 19

20 Before proceeding with installation, refer to installation instructions packaged with each model, as well as complying with all Federal, State, Provincial, and Local codes, regulations, and practices. In keeping with its policy of continuous progress and product improvement, the right is reserved to make changes without notice. PRINTED IN U.S.A QG FORM NO. PTZ-806 REV. 1